Related
Its been a while since ive been on these forums, i used to root and install custom roms on my X10 all the time..... but a Few days ago i rooted my Galaxy Note, following a tutorial from root galaxy note .com and my phone rebooted fine and after doing a root check my phone showed as being rooted, then last night in bed i installed lcd density and changed the settings upon restart my note is hanging on the Samsung bootup logo, i can get into odin mode where it stays on Downloading...Do not turn off target!!, i can also get it into Android System Recover, but cannot get the method of both buttons and power to work
I have been googling online for the last hour finding an answer and most seem to say i need to reflash the whole phone back to normal in odin but was wondering if there is any easier way to get back up and running especially as i didnt install any custom firmware on my phone
please help ??
This question dosn't belong to dev-forum.
But here's the quick answer:
LCD Density changes only one line that blongs to DPI in build.prop file. But you have to alter 2 lines.
So the quick way to revert your bootloop: go to recovery, make a full wipe and reflash your ROM.
If you want change your DPI: Alter it by manually change the lines in build.prop or grab ROM-Toolbox from market and make the changes.
hi thanks for the answer, when you say your rom ? ive been trying to find a custom uk 4.04 rom for the note for the last 45 mins but cant seem to find one, any ideas where ? also how would i change the build.prop without my phone being able to boot up, is it possible?
webwatcher said:
This question dosn't belong to dev-forum.
But here's the quick answer:
LCD Density changes only one line that blongs to DPI in build.prop file. But you have to alter 2 lines.
So the quick way to revert your bootloop: go to recovery, make a full wipe and reflash your ROM.
If you want change your DPI: Alter it by manually change the lines in build.prop or grab ROM-Toolbox from market and make the changes.
Click to expand...
Click to collapse
if your on ics do not ...i repeat do not wipe anything or factory reset...you will brick your phone ..search for bodivas pre rooted stock firmware and flash on odin...read the instructions very carefully
http://forum.xda-developers.com/showthread.php?t=1535025&highlight=bodivas
oh !! i did actually click wipe last night but on the android revoery not clockwork
does that mean its bricked ???
@denny said:
if your on ics do not ...i repeat do not wipe anything or factory reset...you will brick your phone ..search for bodivas pre rooted stock firmware and flash on odin...read the instructions very carefully
http://forum.xda-developers.com/showthread.php?t=1535025&highlight=bodivas
Click to expand...
Click to collapse
liamb2001 said:
oh !! i did actually click wipe last night but on the android revoery not clockwork
does that mean its bricked ???
Click to expand...
Click to collapse
if it was on android recovery you might of escaped , you will find out when you flash firmware...if it gets stuck at factory fs its bricked...good luck
thanks for your advice, feel like giving myself a big slap honestly !!!! i was going to try a custom rom and see if it allowed that to work, where would i find an original 4.04 rom for the uk and o2 ?
@denny said:
if it was on android recovery you might of escaped , you will find out when you flash firmware...if it gets stuck at factory fs its bricked...good luck
Click to expand...
Click to collapse
liamb2001 said:
oh !! i did actually click wipe last night but on the android revoery not clockwork
does that mean its bricked ???
Click to expand...
Click to collapse
For info about the Emmc Brick bug have a check here:
http://forum.xda-developers.com/showthread.php?t=1698977
liamb2001 said:
thanks for your advice, feel like giving myself a big slap honestly !!!! i was going to try a custom rom and see if it allowed that to work, where would i find an original 4.04 rom for the uk and o2 ?
Click to expand...
Click to collapse
some handy torrents here for stock
http://forum.xda-developers.com/showthread.php?t=1590284
in future i would do a bit more reading before you muck around with your phone , and dont bother with the other sites this site has the best info
If I were you I flash a GB stock rom with pc odin. If it pass you are ok and you can wipe again but if stuck on factoryfs.img you are hardbricked.
Please put here also the link for the tutorial that you used.
i managed to use odin to reflash the original firmware and im back up and running
thanks for the help guys
Now spend some time first and read this guide.
http://forum.xda-developers.com/showthread.php?t=1424997
Don't follow other sites different than XDA. It can leave you to a eMMC hardbrick.
Thread Moved
Dont post questions in the dev section! Read the stickies for guidelines!
Lucky you.. Read , read and Read before you act ..
All the Best to which ever ROM you move ..
Hi - I was flashing a rom and somehow soft bricked the phone. It's stuck on the custom startup Samsung screen (phone was rooted of course).
Odin recognizes it so I'm downloading MI9 and going to flash to return to stock.
I'm assuming that should work.
Am I doing anything wrong or should that fix it?
Thanks!
delfinparis said:
Hi - I was flashing a rom and somehow soft bricked the phone. It's stuck on the custom startup Samsung screen (phone was rooted of course).
Odin recognizes it so I'm downloading MI9 and going to flash to return to stock.
I'm assuming that should work.
Am I doing anything wrong or should that fix it?
Thanks!
Click to expand...
Click to collapse
Well are you on MI9?
Jtrain88 said:
Well are you on MI9?
Click to expand...
Click to collapse
I think I was - I don't remember for certain though.
delfinparis said:
I think I was - I don't remember for certain though.
Click to expand...
Click to collapse
There is a thread in Q And A or General. Use the MJ5 restore. Even if your on MI9 you'll be ok. It will just make it MJ5 and all will be good. Follow instructions to a T. I used it several times now with no issue's.
Hello!
I have a Huawei Mate 9 (MHA-L29C432B190). Yesterday I tried to root my Phone to play Pokemon Go with fake gps. After I managed to root my phone, I couldn't boot into TWRP Recovery Mode anymore.
Because I still had some files I needed to flash I installed Flashfire from the PlayStore. I think after I flashed the newest Magisk version(The flash failed because of Error:1), my device got unrooted. But I think my device is still partly rooted because I can't get into Pokemon Go. Everytime I try to start it I get stuck the loading screen. So right now I can't flash anything to get my root back and I don't have the root to use alternative flash applications. I also tried to start return my phone to stock back with a update.app But it can't be installed. I also can't use "fastboot flash recovery twrp.img" I always get " Writing 'recovery'...FAILED (remote:command can't be used/allowed)". And also after some reboots my oem unlock got turned off and I can't turn it on anymore.
I don't have any ideas anymore what to do. I thought I could root my device, so I could unroot properly with superuser. I tried some other application like KingRoot oder OneClickRoot but both of them don't have a rooting method for the Huawei Mate 9 yet. Btw I don't have a backup because of my naivety.
I hope you guys can help me . I appreciate any ideas
Thanks in advance
In summary what do u want???
Sent from my iPhone using Tapatalk Pro
abuk91 said:
In summary what do u want???
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Either way I want a method to root my phone without some flash application or I want a way to return my phone to stock. Or a method to fix TWRP would be fine too.
Kyranix said:
Either way I want a method to root my phone without some flash application or I want a way to return my phone to stock. Or a method to fix TWRP would be fine too.
Click to expand...
Click to collapse
Do a Google search for:
"Return to stock (your model number)"
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Do a Google search for:
"Return to stock (your model number)"
I already did and everything I found didn't work
Kyranix said:
Do a Google search for:
"Return to stock (your model number)"
I already did and everything I found didn't work
Click to expand...
Click to collapse
What did you find? What have you tried?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
What did you find? What have you tried?
I tried to do Upgrades with many different stock firmwares for my model
Kyranix said:
What did you find? What have you tried?
I tried to do Upgrades with many different stock firmwares for my model
Click to expand...
Click to collapse
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
First I tried to do a force upgrade with a "dload" folder with a update.app file on my sdcard . After booting into this upgrade mode by pressing vol up + vol down + power button my device starts to install the stock firmware, but after it reaches 5% I get the message "Error with installing" and a Link to the same site when you boot into twrp. This always happens no matter which file I use. Next I tried to do a normal upgrade by calling this number "*#*#2846579#*#*" (The dload folder is still on my sdcard). But when I start the software upgrade I get booted into twrp and like I said in my post, always when I try to get into twrp I get stuck on the "Your device is booting screen". This is what I tried and basicly every site on google is saying I should try to do one of these two methods
(Here a guide for example: https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/)
(My file in my last try: https://www.getdroidtips.com/huawei-mate-9-stock-firmware-collections/)
Kyranix said:
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
First I tried to do a force upgrade with a "dload" folder with a update.app file on my sdcard . After booting into this upgrade mode by pressing vol up + vol down + power button my device starts to install the stock firmware, but after it reaches 5% I get the message "Error with installing" and a Link to the same site when you boot into twrp. This always happens no matter which file I use. Next I tried to do a normal upgrade by calling this number "*#*#2846579#*#*" (The dload folder is still on my sdcard). But when I start the software upgrade I get booted into twrp and like I said in my post, always when I try to get into twrp I get stuck on the "Your device is booting screen". This is what I tried and basicly every site on google is saying I should try to do one of these two methods
(Here a guide for example: https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/)
(My file in my last try: https://www.getdroidtips.com/huawei-mate-9-stock-firmware-collections/)
Click to expand...
Click to collapse
Stock upgrades are not going to work if you are rooted and have TWRP.
Stock updates require stock recovery and an unmodified system partition(no root).
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Stock upgrades are not going to work if you are rooted and have TWRP.
Stock updates require stock recovery and an unmodified system partition(no root).
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Yeah I have already seen, but I can't find an other method to return my Huawei Mate 9 to stock and I don't really have an root.
Kyranix said:
Yeah I have already seen, but I can't find an other method to return my Huawei Mate 9 to stock and I don't really have an root.
Click to expand...
Click to collapse
But you have TWRP, that won't work. You need stock recovery, custom recovery can't flash stock updates.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
But you have TWRP, that won't work. You need stock recovery, custom recovery can't flash stock updates.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
And can you please tell me how to do it then. You can also send me a guide
Kyranix said:
And can you please tell me how to do it then. You can also send me a guide
Click to expand...
Click to collapse
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Moscow Desire said:
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Click to expand...
Click to collapse
Well thats because I already had problems to post this thread because I am new to xda
Moscow Desire said:
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Click to expand...
Click to collapse
Well thats because I already had problems to post this thread because I am new to xda But thanks for pointing it out, I will probably try it there again. Maybe there I will have more luck
Kyranix said:
Well thats because I already had problems to post this thread because I am new to xda [emoji14] But thanks for pointing it out, I will probably try it there again. Maybe there I will have more luck
Click to expand...
Click to collapse
Even new members(less than 10 posts) can post in device specific Q&A fora, new members are only blocked from posting in "development" fora and threads.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
avnash09 said:
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
Click to expand...
Click to collapse
not even a single reply.. this is not the way to treat a new member thanq
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
ast00 said:
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
Click to expand...
Click to collapse
hi ,
i am a newbie here . my phone gets heated up after the ota install of 4.1.6 so i thought of factory resetting it. after resetting it. it got struck on the one plus logo and started booting again and again. so one of my friend asked to check the forum and i used [UNBRICK] Unbrick Tutorial For The OnePlus 3T!!!!!!!!! by Haris K. from the forum. it installed the os sucessfully. but i couldnt find wifi and bluetooth buttons enabled. so i thought of installing new roms but it gets struck on the one plus logo.. please help me. thanks in advance
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Anova's Origin said:
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Click to expand...
Click to collapse
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
avnash09 said:
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
Click to expand...
Click to collapse
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
fareed_xtreme said:
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
Click to expand...
Click to collapse
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
avnash09 said:
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
Click to expand...
Click to collapse
Reflash with the MSMtool after re-downloading everything and verifying all downloads first before proceeding. Use the tool I have posted at https://forum.xda-developers.com/oneplus-3t/how-to/guide-official-op3t-stock-reset-to-oos-t3598864
Ensure you verify before starting the flash. Also uninstall or deactivate any anti virus application installed on your PC.
should i change the data partitions and everything to f2fs or other thing. system to ext4 data to f2fs
For now, don't worry about the data partitions. As mentioned above, reflash from MSMTools, verify the downloaded package first, and then check. All your issues are probably caused by a bad file.
Hello.
I've been playing with some custom ROMs, recoveries, etc. on S10 SM-G973F. Every time something went wrong I was able to flash stock Android 11 ROM with Odin and run the system after that. But not anymore...
At this moment I have access to Recovery Mode (stock, TWRP, LineageOS... whichever I flash with Odin) and Download Mode. When I try to power on the phone with button or with an option Boot to System from Recovery the phone turns off and nothing else happens. Black screen only, no vibration, etc.
I tried to format data and cache in Stock Recovery and TWRP. I tried to flash many time, changed USB cable, change USB port... nothing helps.
What is strange that after I flash the stock recovery the phone boots one time displaying the unlocked bootloader warning, Samsung logo and Android robot icon with an Erasing sign... but just for a 1-2s, very short time. Before the problem occurred the Erasing took much much more time. After that one time I cannot make to display bootloader unlocked warning and Samsung logo any more, no matter which ROM or recovery I flash.
Maybe you can try installing the original firmware and start over again.
That is what I do in the first place, I try to flash the original firmware with Odin. I use the same files as before. The only difference I can see is that after the flashing the Erase progress was very long and now it is only 1-2s and the phone turns off.
Ok, I've found my mistake and a solution. I will post it here if anyone else has a similar problem.
So while I was playing with different ROMs one of them had an instruction to flash G973FXXSCFUH5-twrp_flashable.zip that included:
modem.bin
dt.img
dtbo.img
cm.bin
sboot.bin
up_param.bin
keystorage.bin
uh.bin
The zip included was to an older firmware G973FXXSCFUH5, while I was already on newer G973FXXSEFUJ2. But the TWRP that I used to flash the zip did not protest and the process finished well. Causing the problems above of course.
Don't know why but flashing the whole original G973FXXSEFUJ2 firmware with Odin was not enough. But when I flashed G973FXXSEFUJ2-twrp_flashable.zip from the TWRP worked and made the phone operational again.
hello, I am in the same situation after having wanted to install blastui I find myself with the possibility of starting only in dow load or in twrp. Can you help me
FabienGege said:
hello, I am in the same situation after having wanted to install blastui I find myself with the possibility of starting only in dow load or in twrp. Can you help me
Click to expand...
Click to collapse
0. Make sure your phone is charged!
1. Check your current SW# in Download mode (the number stands for the number or letter in firmware code, the 5th sign from the end in hexadecimal, for example SW# 14 is E in G973FXXSEFUJ2_G973FOXMEFUJ2)
2. Find the proper version of bootloader and modem in ....-twrp_flashable.zip format (check here: https://github.com/corsicanu/9820-bootloaders_and_modems/releases)
3. Flash and run TWRP recovery.
4. Flash the zip file from #2.
Flashing the stock firmware with Odin was not enough for me. Flashing with TWRP made the S10 back to alive.
.
Doman said:
0. Make sure your phone is charged!
1. Check your current SW# in Download mode (the number stands for the number or letter in firmware code, the 5th sign from the end in hexadecimal, for example SW# 14 is E in G973FXXSEFUJ2_G973FOXMEFUJ2)
2. Find the proper version of bootloader and modem in ....-twrp_flashable.zip format (check here: https://github.com/corsicanu/9820-bootloaders_and_modems/releases)
3. Flash and run TWRP recovery.
4. Flash the zip file from #2.
Flashing the stock firmware with Odin was not enough for me. Flashing with TWRP made the S10 back to alive.
Click to expand...
Click to collapse
Hello brother can you please explain it again to me? My English is terrible and i hope you understand that.
Mohammed_9564 said:
Hello brother can you please explain it again to me? My English is terrible and i hope you understand that.
Click to expand...
Click to collapse
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to use Google Translator.
Doman said:
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to
Doman said:
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to use Google Translator.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Oh man Thanks a lot for your reply i actually managed to do it 2 days ago and it worked thanks to your help again, but i have another question if it's not too much trouble for you, how can i go back to the stock room ? Can i just do it via Odin or is there another way to do it.
Mohammed_9564 said:
Oh man Thanks a lot for your reply i actually managed to do it 2 days ago and it worked thanks to your help again, but i have another question if it's not too much trouble for you, how can i go back to the stock room ? Can i just do it via Odin or is there another way to do it.
Click to expand...
Click to collapse
Best way to go back to stock rom is simply flash it with Odin from original files available from Samsung, for example on SamMobile:
https://www.sammobile.com/samsung/galaxy-s10/firmware/#SM-G973F
Doman said:
Best way to go back to stock rom is simply flash it with Odin from original files available from Samsung, for example on SamMobile:
https://www.sammobile.com/samsung/galaxy-s10/firmware/#SM-G973
Click to expand...
Click to collapse
Thanks for the help brother I appreciate it
For months I've tried searching for a solution to fix my SM-N976U that stopped booting up. None of the symptoms shared fully matched what I was experiencing, so every fix I attempted didn't get her fully functioning again, eventually I gave up trying, stuffed the phone in a drawer and just bought another one. Today I stumbled upon your post and every symptom you described fit exactly with what happen to me, I mean to the T, minus the model and fw version. So I grabbed my SM-N976U one more time and followed your solution... and guess what??? I am now a proud owner of 2 note 10 plus'!!!
Thank you so much for taking the time to share your experience and solution!! Cheers to you bud! Have a great New Year!
Thank you~! my s10 plus is back!