Database Develop

[Root] Rooting any official MIUI version on Redmi Note 4g

Hi,
I found it on web and i don't really remember from where i got it but its not my work so all credits to whom so ever it may be concerned.
##Please proceed at your own risk, i am note responsible for any damage to your device or any data loss.
Below is a zip file that will root nearly any version of MIUI on Redmi Note 4g.
Tried and tested on miui 7 & 8.
##Need Someone to test on MIUI 6##
Its a superuser flashable zip rooting file for Redmi Note 4g only.
https://drive.google.com/file/d/0B8CWcCKLg4hraUZXMDVLc050TWM/view?usp=drivesdk
**To Root**
Please make a backup of your data before starting to root your device.
Recommended: Do not connect to any internet network such as wifi,gprs,3G/4G...
to avoid update searching issue till the process is over.
1)Download the above rooting .zip file from the above URL and save it into your internal/external SD Card(Recommend in your internal SD Card).
2) Now open Updater App of MIUI and open options.(3 dots in the right at the top)
3) Now choose the option "Choose Update Package". Now the file manager will get open.
4)Locate the .zip file that you downloaded in the file manager and click on it(For MIUI 8: After clicking on the file it gets selected and then click on ok).
5)Wait for the process to get over. Phone will restart and you will see the superuser app installed now.
6)Now open the app and a pop up will come to update su.Click on Ok and in that select Normal/CWM or TWRP as per the recovery you have installed on your device.
7) That's it now your device is successful rooted.
##Note: Its not a native root.
**To UNROOT**
1)Just Open The SuperSU App
2)Click on Settings. Then, click On Full Unroot option.
3)Then Click Continue, and the unrooting will begin.
4)After a reboot, your phone should be clean of the root.

I used KINGRoot. Just download the APK and run. So far no any issue seen

Schuan said:
I used KINGRoot. Just download the APK and run. So far no any issue seen
Click to expand...
Click to collapse
Ya its an alternative method to it but using kingroot my experience is not good.
It couldn't not help to fully unroot my device also if i needed to use super su it gave me problem.
If it's working for u then its well and good but if u like super su more then u can use the above method.

I m using note 4g used king root. it did not root. I m using latest firmware. what shoud i do please help

Vivek Kantesaria said:
I m using note 4g used king root. it did not root. I m using latest firmware. what shoud i do please help
Click to expand...
Click to collapse
Give a try to the method that i have mentioned...
Sry for late reply

nrathod3 said:
Give a try to the method that i have mentioned...
Sry for late reply
Click to expand...
Click to collapse
Okay brother not an issue

Vivek Kantesaria said:
Okay brother not an issue
Click to expand...
Click to collapse
Did it work for you?

nrathod3 said:
Did it work for you?
Click to expand...
Click to collapse
Yes then i flashed twrp and RR :angel:

Vivek Kantesaria said:
Yes then i flashed twrp and RR :angel:
Click to expand...
Click to collapse
Cool

iT may cause your phone no reaction while connecting to The Pc if you use The latest supersu version on supersu official website. I prefer phh's superuser . I rooted my mido perfectly With it.

I tried the above method but I accidentally selected twrp method when su asked to update.
Now the phone stuck at MI boot loop screen I can only access to fast boot mode but can't enter recovery mode.
So any help ?

Is the file size 2.81 MB only?

Phone stuck/ Damaged
Im also having same problem.
After flashing Su, it asked for reboot. When i reboot, it is stuck in MI logo and not restarting. i observed this for more than 10 hrs. When i tried to start with recovery, again it is stuck is FASTBOOT screen and not progressing. My phone is not usable now. Please help
aadison said:
I tried the above method but I accidentally selected twrp method when su asked to update.
Now the phone stuck at MI boot loop screen I can only access to fast boot mode but can't enter recovery mode.
So any help ?
Click to expand...
Click to collapse

How can i root my Xiaomi Redmi Note 4G with PC. Only fastboot mode is showing in my phone, no other option is coming.

Root OnePlus 7 Pro , Install Magisk And EdXposed

There Is No TWRP Until Now As Its Been Just 4 Days. But We Don't Need TWRP When We Have Magisk . What I Did :-
1:- Downloaded The Stock Boot Image From Github
2:- Downloaded Latest Magisk Manager And Installed.
3:- Patched Stock Boot Image With Magisk.
Download Here
4:- Flashed The Boot Image Using
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
5:- Rebooted. Dang Its Done:laugh:
Credits :- acervenky for stock image.
Xposed
1:- Download Riru-Core From Here
2:- Download EdXposed From Here
3:- Goto Magisk Click On Modules Click On + Button Than Choose Riru And Do Same From EdXoosed.
4:- Reboot And Install EdXposed Apk From Here
Enjoy

Works.
Installed GravityBox. Running smoothly.

Has anyone tried the european Variant gm1913?

jatinarora said:
Works.
Installed GravityBox. Running smoothly.
Click to expand...
Click to collapse
Which version of gravitybox did you install? I can't find a version for Android P.

sippi90 said:
Has anyone tried the european Variant gm1913?
Click to expand...
Click to collapse
Don't do it, I did and now my device is messed up until I can find a full stock zip. Didn't think to backup my stock boot image unfortunately, with the patched boot image I got here wifi won't work anymore and the settings app became very unstable.
Does anyone have a stock 9.5.4 boot image for GM1913? Or a flashable zip for GM1913? Any help would be much appreciated..

Does this work with a T-Mobile variant that's bootloader unlocked?

ScottOtis said:
Does this work with a T-Mobile variant that's bootloader unlocked?
Click to expand...
Click to collapse
I don't think so - or it will but you can't use the patched boot image posted by others here. If I understand correctly you'll need to patch your own rom's boot image. I think the T-mobile version is its own model (not the GM1917 that most people here have).
I used the patched boot image for GM1917 on a GM1913 and now my wifi and most settings are broken. And unfortunately I can't find a stock zip flash file to recover anywhere... I guess that's how it is buying the phone on launch day in Europe.

gururoop said:
Which version of gravitybox did you install? I can't find a version for Android P.
Click to expand...
Click to collapse
https://github.com/GravityBox/GravityBox/releases/tag/v9.0.0-beta-11_p

unixunderground said:
Don't do it, I did and now my device is messed up until I can find a full stock zip. Didn't think to backup my stock boot image unfortunately, with the patched boot image I got here wifi won't work anymore and the settings app became very unstable.
Does anyone have a stock 9.5.4 boot image for GM1913? Or a flashable zip for GM1913? Any help would be much appreciated..
Click to expand...
Click to collapse
Did you solve your issue ?
I got the same when I try, no wifi on the patched boot.
And unfortunately like you I suppose, I wiped and erased the system..... Spend 4h30 trying to solve it ahah
I did find and download the OTA 9.5.4 from XDA dev named
9.5.4-GM21BA-OnePlus7ProOxygen_21.E.08_OTA_008_all_1905150058_12457a8b-FASTBOOT
Click to expand...
Click to collapse
, if you copy and past this name on Google you will find a download link, and I used the All-In-One tools to flash it, you can here this software : here
Because when I tried to flash with the fastboot command, my device was stucked in the Fastboot Mode and could not do anything for 4h30 until I use the All-in-one tools
Hope it can help

How do we keep root if the when there's an OOS update?

After installing Edxposed it fails safetynet check

A.Priori said:
After installing Edxposed it fails safetynet check
Click to expand...
Click to collapse
I'm on gm1917 with patched 9.5.3 (from rom page here) and followed instructions. With gravitybox it has worked well and passes safetynet...

A.Priori said:
After installing Edxposed it fails safetynet check
Click to expand...
Click to collapse
I also faced this, for me not an issue, would be nice if it passed, but I never use no apps that require it. I'd rather the customization than SafetyNet personally, but fair warning.
ERIC

jatinarora said:
Works.
Installed GravityBox. Running smoothly.
Click to expand...
Click to collapse
Yep running fine on my phone with 9.5.4, Magisk 19.2.
Phone is a GM1917

I thought gm1917 is US version which only has 9.5.3 as latest ?
Are you sure you are gm1917?
---------- Post added at 01:49 PM ---------- Previous post was at 01:48 PM ----------
tech_head said:
Yep running fine on my phone with 9.5.4, Magisk 19.2.
Phone is a GM1917
Click to expand...
Click to collapse
thought gm1917 is US version which only has 9.5.3 as latest ?
Are you sure you are gm1917?

unixunderground said:
Don't do it, I did and now my device is messed up until I can find a full stock zip. Didn't think to backup my stock boot image unfortunately, with the patched boot image I got here wifi won't work anymore and the settings app became very unstable.
Does anyone have a stock 9.5.4 boot image for GM1913? Or a flashable zip for GM1913? Any help would be much appreciated..
Click to expand...
Click to collapse
From the other thread, that's a sign the wrong boot image was flashed

I am European with GM1913 with patched 9.5.4 and works flawless! Used the image in here:
forum.xda-developers.com/oneplus-7-pro/how-to/guide-root-oneplus-7-pro-patched-boot-t3931205

Noob question: Can someone point me in the right direction on how to update to the recently released 9.5.4 if I am rooted with this method?
Sent from my GM1911 using Tapatalk

Aren't we missing the command of "fastboot oem unlock"? Actually aren't we missing several steps from the instructions? Like these:
1) Become a "Developer" by clicking on "About Phone" from the settings menu.
2) Click on "Build Number" over and over until it says you are now a developer.
3) Go to the "Developer Options" from within the "System" section.
4) Turn ON "OEM Unlocking".
5) Boot into FastBoot menu through one of three methods. The easiest is turning ON "Advanced Reboot", holding the power button until the menu pops up and selecting "Bootloader".
6) Once rebooted, type "fastboot OEM Unlocking" to fully unlock the device. (The device will now wipe everything).
Mix some of the instructions from Kingmohdarif in here at the end or somewhere in there.

Munk0 said:
Aren't we missing the command of "fastboot oem unlock"? Actually aren't we missing several steps from the instructions? Like these:
1) Become a "Developer" by clicking on "About Phone" from the settings menu.
2) Click on "Build Number" over and over until it says you are now a developer.
3) Go to the "Developer Options" from within the "System" section.
4) Turn ON "OEM Unlocking".
5) Boot into FastBoot menu through one of three methods. The easiest is turning ON "Advanced Reboot", holding the power button until the menu pops up and selecting "Bootloader".
6) Once rebooted, type "fastboot OEM Unlocking" to fully unlock the device. (The device will now wipe everything).
Mix some of the instructions from Kingmohdarif in here at the end or somewhere in there.
Click to expand...
Click to collapse
Well yeah OP makes some assumptions.
I typed "fastboot flashing unlock" instead of what you said but maybe both works.
Anyways, as OP said, we don't have TWRP yet so we must do more ourselves. I've extracted the lastest STOCK boot image from version 9.5.5.GM21BA (at the time of writing the last on downloads.oneplus.com and also what my 7 Pro is running right now). I patched it with Magisk 19.2 and flashed it using "fastboot flash boot magisk_patched.img".
Result was successful, latest firmware, Magisk rooted :good:
The patched boot image was too large to include so I uploaded it to some random file hosting site: https://www.file-up.org/z8ka0weyftcv
To extract the stock boot image I used this nice tool: https://github.com/cyxx/extract_android_ota_payload

[Updated/All Versions & Models!] Root OnePlus 7T Pro

How to root any version of the OnePlus 7T Pro!
1. Make sure your bootloader is unlocked!
2. Once you're unlocked enter the following ADB commands to extract your current boot image (Your phone needs to be on)
adb shell dd if=/dev/block/bootdevice/by-name/boot_a of=/boot_a.img
adb pull /boot_a.img pathinyourpc
Click to expand...
Click to collapse
3. Download & install Magisk Manager on your phone
4. Put the boot_a.img file on your phone
5. Open the magisk manager app and click the "Advanced Settings" button, then enable "Prserve AVB 2.0/dm-verity & Preserve force encryption", then select the top "Install" button and select "Patch to boot image" and select the boot_a.img
6. Now magisk will create a magisk patched boot image file, put that on your computer
7. Now enter the following ADB command
adb reboot fastboot
fastboot --set-active=a
fastboot boot pathtomagiskpatched.img
Click to expand...
Click to collapse
8. Now you'll boot into the system, reopen the magisk app and click the top install button again and select "Direct install", then reboot
Congratulations you've now successfully rooted your phone!

EDIT: This guide is wrong.
Check these references for the proper guide to root. OP refuses to acknowledge it's wrong even when I pointed it out to him with proof.
https://forum.xda-developers.com/showpost.php?p=81023631&postcount=144
^^^
Mainly this one.
https://forum.xda-developers.com/showpost.php?p=81105485&postcount=171
https://forum.xda-developers.com/showpost.php?p=81106827&postcount=173
-----
Now I have something so do for the weekend, thanks
Just a question, have you tried Viper4Android (if your use it)?: Use 2.7.1.6 stable version.

hi,
tryed it out.. When i boot your patched image.. there is no install button in magisk. It tolds me that i am already on the newest version.
Second.. WLAN isnt working any more. Cant enable wlan. When i reboot with stock img. everything is fine.

Dukynuky said:
hi,
tryed it out.. When i boot your patched image.. there is no install button in magisk. It tolds me that i am already on the newest version.
Second.. WLAN isnt working any more. Cant enable wlan. When i reboot with stock img. everything is fine.
Click to expand...
Click to collapse
Yes it says its installed thats correct but you need to install it again in the magisk app so it stays after restarting the phone. I don't know about WLAN tho

Can you turn on Wifi ?
When i turn it on. It is disabled at the end.
There are similar problems in the 7t forums. Seems a problem with the used magisk version for the boot image.. did you use the canary magisk files ?
and yes.. I know why i need to install. But the linked version of magisk says only.. uninstall..
Edit: i have a european version of the oneplus 7t pro .. and can you provide the original boot image.

I can confirm I have successfully rooted using this method, and WIFI is working fine. Thank you very much, OP and everyone involved, no wits time to set up my device

Ah! Will do this immediately when I get home.

I tried magisk and now it loops to fastboot, does anyone know to recover from this? Does the msm tool for OP7T Pro?
edit: flashed the original boot img and boots fine, whever i try to boot magisk patched it bootlops because faulty drivers
to clear up, i tried installing viper4android driver directly from the app, so i guess theres residue left

Lossyx said:
I tried magisk and now it loops to fastboot, does anyone know to recover from this? Does the msm tool for OP7T Pro?
Click to expand...
Click to collapse
did you install modules ? try booting the patched boot image from here and then, uninstall the modules again...

Works like a charm!
Minor thing you may want to clarify (I know you know, but to prevent confusion for readers), you give a warning that this will wipe all data, but that is not exactly true. Unlocking the bootloader wipes all data, but that step is not part of your instructions. Just following your steps on an already unlocked phone does not wipe the phone.
Thanks to everyone who made this possible so soon!

Dukynuky said:
did you install modules ? try booting the patched boot image from here and then, uninstall the modules again...
Click to expand...
Click to collapse
please see my edited reply, i installed directry through viper4android app, no the module

Dukynuky said:
Can you turn on Wifi ?
When i turn it on. It is disabled at the end.
There are similar problems in the 7t forums. Seems a problem with the used magisk version for the boot image.. did you use the canary magisk files ?
and yes.. I know why i need to install. But the linked version of magisk says only.. uninstall..
Edit: i have a european version of the oneplus 7t pro .. and can you provide the original boot image.
Click to expand...
Click to collapse
got ist working.. layer 8 error.. didnt had the ota update installed.
Updated oxygen os.. then wifi is working. also used canary magisk files.. works perfekt.. thanks

Dukynuky said:
Can you turn on Wifi ?
When i turn it on. It is disabled at the end.
There are similar problems in the 7t forums. Seems a problem with the used magisk version for the boot image.. did you use the canary magisk files ?
and yes.. I know why i need to install. But the linked version of magisk says only.. uninstall..
Edit: i have a european version of the oneplus 7t pro .. and can you provide the original boot image.
Click to expand...
Click to collapse
my wifi works perfectly fine, I have the EU version too.
I attached screenshots of what to do with the installed, please select the direct install option and then reboot!

droidvark said:
Works like a charm!
Minor thing you may want to clarify (I know you know, but to prevent confusion for readers), you give a warning that this will wipe all data, but that is not exactly true. Unlocking the bootloader wipes all data, but that step is not part of your instructions. Just following your steps on an already unlocked phone does not wipe the phone.
Thanks to everyone who made this possible so soon!
Click to expand...
Click to collapse
I have a warning above the instructions already, I think you might have missed it

Lossyx said:
I tried magisk and now it loops to fastboot, does anyone know to recover from this? Does the msm tool for OP7T Pro?
edit: flashed the original boot img and boots fine, whever i try to boot magisk patched it bootlops because faulty drivers
to clear up, i tried installing viper4android driver directly from the app, so i guess theres residue left
Click to expand...
Click to collapse
I also bootlooped as well, I tried to install liveboot and i guess that didnt work lol
anyways, I fixed my bootloop by booting the unpatched boot img and then doing a factory reset in the settings, after that you can just boot to the magisk boot img again!

Lossyx said:
please see my edited reply, i installed directry through viper4android app, no the module
Click to expand...
Click to collapse
Use the module next time!

HolyChickenGuy said:
I have a warning above the instructions already, I think you might have missed it
Click to expand...
Click to collapse
I'm not sure where the misunderstanding is coming from, I know that you give that warning. What I mean is that strictly speaking following your steps does not wipe the phone, unlocking the bootloader wipes the phone. But you don't have that step in your instructions. See what I mean? .
When I read your steps, I was like "wipes my phone how?" Maybe booting your image would wipe my phone or something? I'm glad it didn't .
I just thought for clarity's sake it would be good to make that clear in the steps that's all!

droidvark said:
I'm not sure where the misunderstanding is coming from, I know that you give that warning. What I mean is that strictly speaking following your steps does not wipe the phone, unlocking the bootloader wipes the phone. But you don't have that step in your instructions. See what I mean? .
When I read your steps, I was like "wipes my phone how?" Maybe booting your image would wipe my phone or something? I'm glad it didn't .
I just thought for clarity's sake it would be good to make that clear in the steps that's all!
Click to expand...
Click to collapse
Oh sorry, yeah I rewrote it to make it clearer. Unlocking the bootloader will wipe your data
Sent from my HD1913 using Tapatalk

HolyChickenGuy said:
I also bootlooped as well, I tried to install liveboot and i guess that didnt work lol
anyways, I fixed my bootloop by booting the unpatched boot img and then doing a factory reset in the settings, after that you can just boot to the magisk boot img again!
Click to expand...
Click to collapse
Damn, you are my hero. Did a factory reset and followed the OP again, now everything is fine and I'm rooted. Thank you again.
edit: also, for safety precaution, disable automatic updates in Developer options
https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation

Great, I'll check back in on this tomorrow and see how everyone is getting on before I try. Had a skim through here this morning before mine arrived and didn't see anything so set up as is.

Can I get root with pie of the Japanese version SM-N960J / D?

I own the Japanese version of Note9 SM-N960D (SC-01L) SM-N960J (SCV40).
Currently using 9.0 pie.
I want to get the route, but when I wipe with TWRP, I fall into the boot loop.:crying:
Even if you install Magisk and RMM-State_Bypass, it will not start.
I also installed no-verity-opt-encrypt-6.1.zip or no-verity-opt-encrypt-6.0.zip.
Does anyone know how to get root of this Note9 terminal and start it?

neoquor said:
I own the Japanese version of Note9 SM-N960D (SC-01L) SM-N960J (SCV40).
Currently using 9.0 pie.
I want to get the route, but when I wipe with TWRP, I fall into the boot loop.:crying:
Even if you install Magisk and RMM-State_Bypass, it will not start.
I also installed no-verity-opt-encrypt-6.1.zip or no-verity-opt-encrypt-6.0.zip.
Does anyone know how to get root of this Note9 terminal and start it?
Click to expand...
Click to collapse
you might need to flash a custom kernel( or at least a patched one after data format. or it will just bootloop)
also please read dr ketans guide in the general discussion section and use method 1.

bober10113 said:
you might need to flash a custom kernel( or at least a patched one after data format. or it will just bootloop)
also please read dr ketans guide in the general discussion section and use method 1.
Click to expand...
Click to collapse
Thank you for your reply.
Which kernel should be rewritten?
Which discussion page is [dr ketans guide in the use method 1]?
I would be happy if you could tell me.

neoquor said:
Thank you for your reply.
Which kernel should be rewritten?
Which discussion page is [dr ketans guide in the use method 1]?
I would be happy if you could tell me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-9/how-to/root-note-9-n960f-fd-experimental-t3832143/

bober10113 said:
https://forum.xda-developers.com/galaxy-note-9/how-to/root-note-9-n960f-fd-experimental-t3832143/
Click to expand...
Click to collapse
Thank you for teaching me.
However, TWRP freezes during installation of "N960F_DS_N_PIE_Root_for_OEM_issue_devices_V5.zip" and cannot be installed.
what should I do?

neoquor said:
Thank you for teaching me.
However, TWRP freezes during installation of "N960F_DS_N_PIE_Root_for_OEM_issue_devices_V5.zip" and cannot be installed.
what should I do?
Click to expand...
Click to collapse
what do you mean? have you tried to flash again? also do you choose magisk option and kernel option during setup?

bober10113 said:
what do you mean? have you tried to flash again? also do you choose magisk option and kernel option during setup?
Click to expand...
Click to collapse
I tried the following:
1. Burn carrier genuine ROM with Odin
2. Launch download mode again and write [TWRP_3.2.3-0_N9600_beta3.tar.md5] with Odin
3.TWRP immediately after Method 2
4.Wipe → FORMAT DATA → yes with TWRP
5.Reboot to recovery mode and mount system etc.
6.Install → microSD card menu → “N960F_DS_N_PIE_Root_for_OEM_issue_devices_V5.zip” → Install
Freeze the installation screen.
The terminal I am using is snapdragon.

neoquor said:
I tried the following:
1. Burn carrier genuine ROM with Odin
2. Launch download mode again and write [TWRP_3.2.3-0_N9600_beta3.tar.md5] with Odin
3.TWRP immediately after Method 2
4.Wipe → FORMAT DATA → yes with TWRP
5.Reboot to recovery mode and mount system etc.
6.Install → microSD card menu → “N960F_DS_N_PIE_Root_for_OEM_issue_devices_V5.zip” → Install
Freeze the installation screen.
The terminal I am using is snapdragon.
Click to expand...
Click to collapse
oh snapdragon really? that's why. i thought the japanese model was Exynos. very sorry for that mistake.
then please go to:
https://forum.xda-developers.com/showpost.php?p=77721998&postcount=2
there is guidance in that post towards the end regarding twrp and root.
also i think if you flash twrp, boot to twrp, flash decryption fix then format, reboot back to twrp and then flash latest patched kernel:
https://mega.nz/#F!XlkXxYZK!-KlTcLtsQ14eQBTa-AUNhA!T4lmyYJC
(taken from mentalmuso's thread i linked)
to flash .img choose install image button in twrp then select kernel.img then select destination partition:
boot

bober10113 said:
oh snapdragon really? that's why. i thought the japanese model was Exynos. very sorry for that mistake.
then please go to:
https://forum.xda-developers.com/showpost.php?p=77721998&postcount=2
there is guidance in that post towards the end regarding twrp and root.
also i think if you flash twrp, boot to twrp, flash decryption fix then format, reboot back to twrp and then flash latest patched kernel:
https://mega.nz/#F!XlkXxYZK!-KlTcLtsQ14eQBTa-AUNhA!T4lmyYJC
(taken from mentalmuso's thread i linked)
to flash .img choose install image button in twrp then select kernel.img then select destination partition:
boot
Click to expand...
Click to collapse
Thank you for your kindness! Made progress. But there is a new problem.
After installing the WETA kernel, TWRP and Magisk were able to boot in a retained state.
However, there is a problem, and after restarting, a green screen of security error is displayed and it cannot be started.
Next, after installing the kernel, I installed no-verity-opt-encrypt-6.1.zip and Magisk.
While holding TWRP and Magisk, I was able to start and restart without any problems.
However, if NFC cannot be used and PIN code lock is applied, the lock cannot be released at all even if the correct PIN code is entered.
Please give me advice.

neoquor said:
Thank you for your kindness! Made progress. But there is a new problem.
After installing the WETA kernel, TWRP and Magisk were able to boot in a retained state.
However, there is a problem, and after restarting, a green screen of security error is displayed and it cannot be started.
Next, after installing the kernel, I installed no-verity-opt-encrypt-6.1.zip and Magisk.
While holding TWRP and Magisk, I was able to start and restart without any problems.
However, if NFC cannot be used and PIN code lock is applied, the lock cannot be released at all even if the correct PIN code is entered.
Please give me advice.
Click to expand...
Click to collapse
i really dont know. im on exynos device. people with n9600 will have to help you as i have no experience with snapdragon.
sorry

neoquor said:
Thank you for your kindness! Made progress. But there is a new problem.
After installing the WETA kernel, TWRP and Magisk were able to boot in a retained state.
However, there is a problem, and after restarting, a green screen of security error is displayed and it cannot be started.
Next, after installing the kernel, I installed no-verity-opt-encrypt-6.1.zip and Magisk.
While holding TWRP and Magisk, I was able to start and restart without any problems.
However, if NFC cannot be used and PIN code lock is applied, the lock cannot be released at all even if the correct PIN code is entered.
Please give me advice.
Click to expand...
Click to collapse
try:
https://forum.xda-developers.com/ga...velopment/kernel-n9600-klabit-kernel-t3992637
use just the kernel

bober10113 said:
try:
https://forum.xda-developers.com/ga...velopment/kernel-n9600-klabit-kernel-t3992637
use just the kernel
Click to expand...
Click to collapse
Thanks, Bob! Just like @neoquor, I am using a Snapdragon Note 9 (SCV40/SM-N960J) from the carrier au. I was able to successfully boot with the firmware of another Japanese carrier variant SM-N960D/SC-01L (carrier DoCoMo) and @klabit87 's N9600 klabit kernel.
Following the Magisk installation instructions from @topjohnwu 's GitHub, my installation was a bit windy (trial-and-error), but I (1) launched Odin and flashed my Magisk-patched SC-01L AP binary along with BL, CP, and CSC; and (2) after falling into the bootloop, I flashed klabit's official N9600 TWRP build, and (3) flashed klabit's N9600 kernel.
After that, success--finally! Dekita!

bober10113 said:
try:
https://forum.xda-developers.com/ga...velopment/kernel-n9600-klabit-kernel-t3992637
use just the kernel
Click to expand...
Click to collapse
Thanks, Bob!
With this, Snapdragon Note 9 (SCV40 / SM-N960J) did not reach the boot loop and succeeded in rooting!
However, when I start it, "It's a non-genuine kernel" is displayed and I can't start some apps I want to use.
What should i do?

neoquor said:
Thanks, Bob!
With this, Snapdragon Note 9 (SCV40 / SM-N960J) did not reach the boot loop and succeeded in rooting!
However, when I start it, "It's a non-genuine kernel" is displayed and I can't start some apps I want to use.
What should i do?
Click to expand...
Click to collapse
Dear NeoQuor, did you find any solution ?
I have the same problem I I flashed patched magisk with boot.img file it is flashed 100% but I'm not able to boot to android. it keeps restarting on the boot loop.
I just found one source this guy he is able to root SCV40
https://support.halabtech.com/index.php?a=downloads&b=folder&id=77034
i look forward to a solution for my phone to be rooted.
regards,
Sher

I also have SCV40, and the only reason I need to root my SCV40 because I need to edit and rewrite ro.confiq.tima=1 to 0 so that I'll be able to use S-Health, but in the end I can't root my SCV40, It is impossible, but I did rooting my friend's Note9 and it work well. I guess there's still no one can root SCV40 Until today.

New update 10.3.3 live now

Just got notified of the update.
Downloading the update now & will share the file in later post for you guys.
Uploaded the file to android file host.
Incremental update file:.
https://www.androidfilehost.com/?fid=4349826312261819958
Full update file:
https://www.androidfilehost.com/?fid=4349826312261819976
https://briw.me/10.3.3/OnePlus7ProOxygen_21.P.27_OTA_027_all_2005192132_076a8e3.zip

@red rocket, here is the full update for 10.3.3 hosted on my server (feel free to add to OP if you'd like):
OnePlus7ProOxygen_21.P.27_OTA_027_all_2005192132_076a8e3.zip
MD5

a63548 said:
@red rocket, here is the full update for 10.3.3 hosted on my server (feel free to add to OP if you'd like):
OnePlus7ProOxygen_21.P.27_OTA_027_all_2005192132_076a8e3.zip
MD5
Click to expand...
Click to collapse
Thanks I'm on my way to upload the file to my android file host account as well. Appreciate the quick upload

I'm not unable to get into settings now after updating through magisk. Weird. I did disable the magisk modules.

JDROIDS said:
I'm not unable to get into settings now after updating through magisk. Weird. I did disable the magisk modules.
Click to expand...
Click to collapse
Is this still an issue for you? I haven't taken it yet, and your comment froze me. Your signature says OP 5T..
It's been a while since the last OTA, so I ask to reconfirm. I need to:
1) Uninstall RICE in Magisk and other modules
2) Uninstall XXX or not? That thread stated long ago that the module can be left installed since it's not version-dependent.
3) Uninstall twrp a/b retention script
4) DOwnload full update using oxygen updater.
5) Install update using settings/local upgrade. DO NOT REBOOT
6) Install Magisk. DO NOT REBOOT
7) INstall TWRP a/b retention script in magisk. DO NOT REBOOT
8) Install Magisk to inactive slot. NOW REBOOT
Is that right?

Is this twrp flashable.

rowdy_83 said:
Is this twrp flashable.
Click to expand...
Click to collapse
Yes

liam_davenport said:
Yes
Click to expand...
Click to collapse
Why would we chose to flash it via twrp? Is it easier or faster or better? I ask to learn since all guides mention the use of the update app
Sent from my OnePlus7Pro using XDA Labs

nabril15 said:
Why would we chose to flash it via twrp? Is it easier or faster or better? I ask to learn since all guides mention the use of the update app
Click to expand...
Click to collapse
So you don't overwrite TWRP with the stock recovery, and reflash Magisk while in recovery.

AarSyl said:
So you don't overwrite TWRP with the stock recovery, and reflash Magisk while in recovery.
Click to expand...
Click to collapse
Got it. Or, use the update method that has a step where a twrp retention script is installed in Magisk. They both sound like similar methods
Sent from my OnePlus7Pro using XDA Labs

nabril15 said:
Got it. Or, use the update method that has a step where a twrp retention script is installed in Magisk. They both sound like similar methods
Click to expand...
Click to collapse
They are, but for the old-time root users (like myself), flashing from TWRP is the simplest way.
Mind you, I'm not old (32yrs), but I've been rooting since the HTC Evo, and flashing ROMs and updates from TWRP is the most straightforward method.

AarSyl said:
They are, but for the old-time root users (like myself), flashing from TWRP is the simplest way.
Mind you, I'm not old (32yrs), but I've been rooting since the HTC Evo, and flashing ROMs and updates from TWRP is the most straightforward method.
Click to expand...
Click to collapse
I totally understand. Easy is good. I've been flashing a long time as well, and this TWRP approach appeals to me.
What are the steps? Boot to twrp, flash update, reboot? And twrp and magisk will be kept? I assume that before flashing, I would need to remove all magisk modules - RICE, XXX, and whatever else is in there. No?

These update logs has been pretty lame lately. Shuffling same BS around.

AarSyl said:
They are, but for the old-time root users (like myself), flashing from TWRP is the simplest way.
Mind you, I'm not old (32yrs), but I've been rooting since the HTC Evo, and flashing ROMs and updates from TWRP is the most straightforward method.
Click to expand...
Click to collapse
Lol same here but IAM little older.i install through Twrp after format .so it's installed clean.

mholloway said:
Lol same here but IAM little older.i install through Twrp after format .so it's installed clean.
Click to expand...
Click to collapse
Can you kindly elaborate or expand, if you will, on the steps that you followed?
Sent from my OnePlus7Pro using XDA Labs

nabril15 said:
Can you kindly elaborate or expand, if you will, on the steps that you followed?
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
Same as flashing a rom. In TWRP went to wipe.choose format ,type yes it deleted everything..
Reboot recovery
Connect to computer
Click on your device ,then internal storage,then TWRP.
Copy this rom OOS10 and TWRP zip and magisk zip to TWRP file.
Install OOS10,then flash TWRP
Reboot to TWRP,flash OOS10 again,then TWRP
reboot recovery flashed OOS10 again and TWRP
then reboot system
Don't forget to flash TWRP right after flashing rom or you will have the stock recovery..
After set up boot TWRP and flash magisk.

Anyone facing battery drain issue after updating to 10.3.3? also i m facing slow charging issue
Anyone else or its just me?

Is this for Europe?

Psyscope said:
Is this for Europe?
Click to expand...
Click to collapse
10.0.6 is for eu but still not out
Rocket Powered Oneplus 7 Pro

here is the full update for 10.3.3 hosted on my server (feel free to add to OP if you'd like):
https://pan.daxiaamu.com/一加手机官方ROM/...en_21.P.27_OTA_027_all_2005192132_076a8e3.zip