Hi Guys ;
I have unlocked the bootloader of my HTC one and now inside fastboot it shows UNLOCKED. I have also tried to flash both TWRP and CWM recoveries using fastboot method and both finishes with success with no error messages.
but the problem is that I can not boot into recovery. I dont know what happens exactly but seems rebooting into recovery fails and phone reboots again into normal mode so I see the htc boot screen twice and then I am in normal mode.
Do you have any ideas ?
Regards
I finally managed to install TWRP. the trick was to disable fast boot in power settings , then turn off the phone completely and enter hboot and then fastboot.
I was entering fastboot directly through adb and it was not working ! it should be a bug inside bootloader. it should not matter how you enter fastboot , but in this case it does matter ! I hope it helps someone.
For some reason my phone will not boot into recovery. I have tried booting into recovery from the system and via adb. Takes me straight to bootloader. Strange thing is when in bootloader/fastboot mode my computer will not recognize my device in adb when connected, but when I am booted into the system the phone is recognized in adb. I think I have to reflash my recovery (twrp v2.6.3) but originally I flashed it with goo manager, which seems to be down atm. My question is how do I get my device recognized while in bootloader/fastboot again so I can manually flash twrp, and what were the commands to properly flash the recovery via bootloader/fastboot. I did do a search but did not find specific results that answer my questions. I know I've read about this happening but I cannot remember where. Tia.
Edit: FIXED!!!Needed fastboot in same directory where adb exe was located. Commands were able to be run to flash recovery from fastboot.
Hey xda community,
last night i run into a tricky situation.
First, I explain what I did
I bought me the P9 EVA-L09 via Telekom Germany.
cause i don't want the Telekom **** on my device i decide to TWRP, Root, and flash P9 stock Rom on it.
Unlocking and install TWRP with the SRK Tool works fine. Install the Root was a bit more tricky, because windows lost the correct ADB connection when i go into TWRP Sideload Mode. Because that does not work, i decide to flash the P9 Stock ROM without Root to come forward.
While flashing, (i don''t now anymore which method i choose to flash) an error appers, and the flash process canceled.
The Device don't boot anymore. After a loot of googeling and testing, i've found out that the problem was the encryption of the /Data Partition.
TWRP was unable to mount it, same for the /cust and one more.
After reading about other Methods to get the Phone work again i try this Method i've found on xda.
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Unfortunately the "press all buttons on the phone" Method don't work.
I also tried out the Huawei Update Extractor to flash single image files to the partitons of the phone. I used the dload file form the previous Method
http://forum.xda-developers.com/showthread.php?t=2433454
http://www.modaco.com/forums/topic/372688-re-partition-stock-partition-tool/ (using the answer on the bottom)
Download from xda huawei update extractor and extract img files from the update.
Turn off the phone, then press vol- and power key, you are in fastboot mode.
Then, flash img files from extracted rom with:
Fastboot flash system SYSTEM.IMG
fastboot flash boot BOOT.IMG
And do the same with the others...
When you finish, fastboot reboot
Click to expand...
Click to collapse
But that don't work. fastboot already replies with "Remote Command not allowed"
i changed the Method a bit. I've put the BOOT.IMG and RECOVERY.IMG an an SD card and flash it via the Install IMG Funktion of TWRP.
That workes very well and expect the /data partition every partition was mountable again.
Then i used the "Fastboot flash system SYSTEM.IMG" again, and tada it works without errors.
The device is booting again to Android, but it reports that the /Data Partition Decryption failed and i have to enter the Recovery Mode and do a factory reset to unlock the partition. If i reboot for get rid of this error the phone does not boot into the Recovery, it boot to the eRecovery which is useless for that because it only provide the eRecovery function instead of also a normal factory reset (how dump is this )
Now the state is, phone boots normal, reports the /Data is not decryptable, reboot to eRecovery, shutdown or reboot. It does really nothing else.
I can't get into the Fastboot/Download Mode, it ignores the Key Combination Volume down + Power. If i press this it starts normal.
I also can't get into the recovery / TWRP Mode, it ignores the Key Combination Volume Up + Power. If i press this is starts normal.
I've also noticed that the Phone is not conecting to the ADB on my computer, only the virtual CDROM from wich the HiSuite is installable connects.
I've also noticed that the eRecovery is not able to starts WIFI on the phone. It errors with "Starting WIFI failed!"
I also tryed out another time the dload function. This changed nothing. Phone boots still normal and run into the Decryption problem.
And i tried out to boot into fastboot or recovery after a cold reset, battery empty
Now it's on you. Has anybody an idea how i can solve one of the above problems. I think when one is solved the others will disappear via flashing new TWRP or so
Try connecting your phone to usb and then holding power+volume down until it boots to fastboot mode.
Huawei phone won't boot into recovery if system and twrp don't match but it should boot to fastboot allways.
What is the last rom you had on your phone while it was working?
Ogameplayer said:
Hey xda community,
last night i run into a tricky situation.
First, I explain what I did
I bought me the P9 EVA-L09 via Telekom Germany.
cause i don't want the Telekom **** on my device i decide to TWRP, Root, and flash P9 stock Rom on it.
Unlocking and install TWRP with the SRK Tool works fine. Install the Root was a bit more tricky, because windows lost the correct ADB connection when i go into TWRP Sideload Mode. Because that does not work, i decide to flash the P9 Stock ROM without Root to come forward.
While flashing, (i don''t now anymore which method i choose to flash) an error appers, and the flash process canceled.
The Device don't boot anymore. After a loot of googeling and testing, i've found out that the problem was the encryption of the /Data Partition.
TWRP was unable to mount it, same for the /cust and one more.
After reading about other Methods to get the Phone work again i try this Method i've found on xda.
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Unfortunately the "press all buttons on the phone" Method don't work.
I also tried out the Huawei Update Extractor to flash single image files to the partitons of the phone. I used the dload file form the previous Method
http://forum.xda-developers.com/showthread.php?t=2433454
http://www.modaco.com/forums/topic/372688-re-partition-stock-partition-tool/ (using the answer on the bottom)
Download from xda huawei update extractor and extract img files from the update.
Turn off the phone, then press vol- and power key, you are in fastboot mode.
Then, flash img files from extracted rom with:
Fastboot flash system SYSTEM.IMG
fastboot flash boot BOOT.IMG
And do the same with the others...
When you finish, fastboot reboot
But that don't work. fastboot already replies with "Remote Command not allowed"
i changed the Method a bit. I've put the BOOT.IMG and RECOVERY.IMG an an SD card and flash it via the Install IMG Funktion of TWRP.
That workes very well and expect the /data partition every partition was mountable again.
Then i used the "Fastboot flash system SYSTEM.IMG" again, and tada it works without errors.
The device is booting again to Android, but it reports that the /Data Partition Decryption failed and i have to enter the Recovery Mode and do a factory reset to unlock the partition. If i reboot for get rid of this error the phone does not boot into the Recovery, it boot to the eRecovery which is useless for that because it only provide the eRecovery function instead of also a normal factory reset (how dump is this )
Now the state is, phone boots normal, reports the /Data is not decryptable, reboot to eRecovery, shutdown or reboot. It does really nothing else.
I can't get into the Fastboot/Download Mode, it ignores the Key Combination Volume down + Power. If i press this it starts normal.
I also can't get into the recovery / TWRP Mode, it ignores the Key Combination Volume Up + Power. If i press this is starts normal.
I've also noticed that the Phone is not conecting to the ADB on my computer, only the virtual CDROM from wich the HiSuite is installable connects.
I've also noticed that the eRecovery is not able to starts WIFI on the phone. It errors with "Starting WIFI failed!"
I also tryed out another time the dload function. This changed nothing. Phone boots still normal and run into the Decryption problem.
And i tried out to boot into fastboot or recovery after a cold reset, battery empty
Now it's on you. Has anybody an idea how i can solve one of the above problems. I think when one is solved the others will disappear via flashing new TWRP or so
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/p9/how-to/tools-huawei-p9-firmware-updater-t3432457/page1
Sent from my HUAWEI VIE-L29 using XDA Labs
I see two possibilites for this behavior:
1) The phone only pretents to reboot but makes a kind of warm start (never running the code to branch to recovery/boot) -> if the phone seems powered off and you attach usb cable, do you see standard battery laoding animation (that's what it should be) or black screen / boot logo?
2) You flashed a wrong boot.img and/or recovery.img or flashing got screwed up
If you have wrong images, fastboot should still work as edint3000 said.
For the unlikely case (1) with non removable battery you have to wait until battery is drained before you can boot into fastboot after connecting USB cable. Edit: oops just saw you did that.
I had another phone that at some point decided to go only in fastboot with volume down and no power button, when powered up with USB power. But I had never such an issue with a Huawei phone. However, playing around a bit costs nothing (but time).
I see no reason why fast boot should not work. How did you find out, that everything is fine after flahing with TWRP and before flashing system with fastboot?
Did you do anything else than flashing the system.img with fastboot?
Chilli
Same problem here...Phone not boot/not enter fastboot mode/not enter recovery mode...just stuck "your device booting now" screen...any solution?
Hello Mossyhand
you should search for the recovery Method with an "dload" ROM. This are kind of special Roms wich are able to "selfflash" onto the phone.
You have to put the right file onto your SD Card and then you have to press some keys when i remember right.
Sadly i've forgot, when i solved my problem, to reply how i did that exactly ._.
But if you do search in the dload method you will figure a way out i guess
If you don't find an right file, i can upload you my file, i have it still on my computer
had the same problem
go into the erecovery, it will tell you the data partition has been damaged. u can wipe it from there. go into trwp again, install rom and stuff. voila, works
cheers
Every time i try to install twrp via fastboot mode returns me to fastboot when i boot the phone. And i found a way to boot again.
But i cant install smth via fastboot mode when stucks, i cant go into recovery mode
*I have all drivers*
Can you boot into twrp from fastboot (fastboot boot path/to/twrp.img)? Then you could try to install from twrp.
Man i did it. Thank u for ur help
As the title states, my phone is stuck in a bootloop, and only fastboot works. Trying to go into recovery or rescue mode results in going back to the bootloop instead of actually going to rescue/recovery mode. Any fastboot commands result in `waiting for device` even though it shows the device in `fastboot devices`.
Is there anything I can do to try to get it to work again?
I have gotten it into recovery mode before and was able to factory reset it, however when I plugged it in the phone crashed and went back into a bootloop, and now loading into recovery mode does not work.
Also if it's any help, I previously had the device rooted with magisk, I powered it off and when I powered it back on it went into a bootloop (I did not make any changes like installing/updating magisk plugins prior to shutting it down).
Update to this: I was able to install graphene os via command line.