Related
Managed to succesfully port Ressurection Remix (7.1) to the Moto Green Pomelo (xt1799). Rom boots and all features work apart from Fingerprint reader.
Need help with fixing fingerprint
dmilz said:
Managed to succesfully port Ressurection Remix (7.1) to the Moto Green Pomelo (xt1799). Rom boots and all features work apart from Fingerprint reader.
Need help with fixing fingerprint
Click to expand...
Click to collapse
Sorry for mb inappropriate question: Do you have a physical device? If you do, did you unlock and root it (cos i have some issues with that)?
irewer said:
Sorry for mb inappropriate question: Do you have a physical device? If you do, did you unlock and root it (cos i have some issues with that)?
Click to expand...
Click to collapse
Yes i do..
I unlocked bootloader and rooted
dmilz said:
Managed to succesfully port Ressurection Remix (7.1) to the Moto Green Pomelo (xt1799). Rom boots and all features work apart from Fingerprint reader.
Need help with fixing fingerprint
Click to expand...
Click to collapse
Have you figured the problem out yet? Is there any other known custom ROMs working on Pomelo? Also how did you do it? I don't see Montana in Downloads section for the ROM.
sixtheninth said:
Have you figured the problem out yet? Is there any other known custom ROMs working on Pomelo? Also how did you do it? I don't see Montana in Downloads section for the ROM.
Click to expand...
Click to collapse
No, i didnt get the chance to figure it out as i broke my moto screen completely. There are no custom roms for the xt-1799-2, wish i had shared it. But if you are interested you can easily port the roms for any moto g5s over to your xt-1799-2
dmilz said:
No, i didnt get the chance to figure it out as i broke my moto screen completely. There are no custom roms for the xt-1799-2, wish i had shared it. But if you are interested you can easily port the roms for any moto g5s over to your xt-1799-2
Click to expand...
Click to collapse
Yeah, I am very interested. I tried RR, LineageOS, Viper for other montanas, all crashed after boot back into bootloader. Also I'd be interested getting Oreo based ROMs. So far I m stuck with chinese ZUI 3.1 which prevents me from flashing or installing Gapps.
sixtheninth said:
So far I m stuck with chinese ZUI 3.1 which prevents me from flashing or installing Gapps.
Click to expand...
Click to collapse
You can unclock (XT1799-2 may be 'secretly' unlocked already), root your device, flash custom TWRP (escpecially for Moto G5S XT1792/1794 and Green Pomelo XT1799-2) - and then you'll be able to install Open GApps via TWRP/root.
Also you can simply open special Lenovo App Store on your ZUI-based phone (look for it carefully!), install Google Store's apk from out there - and be enjoying with any GApps and other official apk's.
sixtheninth said:
Also I'd be interested getting Oreo based ROMs.
Click to expand...
Click to collapse
If you will flash bootloader version 07 (not 06 as you have on any available ZUI stock ROMs), you'll be able to flash distinct Oreo firmware (XT1792 for Brasil/India/EU) in straight way (thread 1; thread 2). BUT YOU'RE GOING TO LOSE NFC and SELFIE-CAMERA in cause of special drivers lack!!! And you will have no way for downgrading of firmware in cause higher version bootloader.
* also you would prefer to flash Moto G5s' stock Android 7.1.1 firmaware (XT1794) on your Green Pomelo (XT1799-2), using this manual.
** stock Green Pomelo's ZUI-based Android 7.1.1 firmware you can find here
irewer said:
You can unclock (XT1799-2 may be 'secretly' unlocked already), root your device, flash custom TWRP (escpecially for Moto G5S XT1792/1794 and Green Pomelo XT1799-2) - and then you'll be able to install Open GApps via TWRP/root.
Also you can simply open special Lenovo App Store on your ZUI-based phone (look for it carefully!), install Google Store's apk from out there - and be enjoying with any GApps and other official apk's.
If you will flash bootloader version 07 (not 06 as you have on any available ZUI stock ROMs), you'll be able to flash distinct Oreo firmware (XT1792 for Brasil/India/EU) in straight way (thread 1; thread 2). BUT YOU'RE GOING TO LOSE NFC and SELFIE-CAMERA in cause of special drivers lack!!! And you will have no way for downgrading of firmware in cause higher version bootloader.
* also you would prefer to flash Moto G5s' stock Android 7.1.1 firmaware (XT1794) on your Green Pomelo (XT1799-2), using this manual.
** stock Green Pomelo's ZUI-based Android 7.1.1 firmware you can find here
Click to expand...
Click to collapse
Thanks a lot! I was unable to Flash Gapps 7.1 in TWRP due to incorrect architecture error. I see that Oreo original ROM will probably never arrive to this phone, so I'll stick to 7.1. What buzzes me the most is that there is no custom rom compatible with XT1799 without losing some of its extra functions. I wonder how hard it will be to port Lineage, RR or similar to enjoy. I've been always using custom roms and now I feel kinda left out
---------- Post added at 10:31 AM ---------- Previous post was at 10:23 AM ----------
sixtheninth said:
Thanks a lot! I was unable to Flash Gapps 7.1 in TWRP due to incorrect architecture error. I see that Oreo original ROM will probably never arrive to this phone, so I'll stick to 7.1. What buzzes me the most is that there is no custom rom compatible with XT1799 without losing some of its extra functions. I wonder how hard it will be to port Lineage, RR or similar to enjoy. I've been always using custom roms and now I feel kinda left out
Click to expand...
Click to collapse
Update, I just fastboot flashed the Firmware from the links provided, but managed to hard brick my phone!!!!!! ((( Don't know what to do now.
careful with flashing other moto g5s model roms on the xt-1799-2, its different and so you might get a brick. The best you can do is port like i said. You can unlock bootloader by "fastboot oem flashing" if that doesnt work for you try "fastboot oem unlock". I will be back on the pomelo xt-1799-2 soon as i am planning to order another one. Infact you guys will need a section dedicated to the xt-1799-2
sixtheninth said:
Thanks a lot! I was unable to Flash Gapps 7.1 in TWRP due to incorrect architecture error. I see that Oreo original ROM will probably never arrive to this phone, so I'll stick to 7.1. What buzzes me the most is that there is no custom rom compatible with XT1799 without losing some of its extra functions. I wonder how hard it will be to port Lineage, RR or similar to enjoy. I've been always using custom roms and now I feel kinda left out
---------- Post added at 10:31 AM ---------- Previous post was at 10:23 AM ----------
Update, I just fastboot flashed the Firmware from the links provided, but managed to hard brick my phone!!!!!! ((( Don't know what to do now.
Click to expand...
Click to collapse
Hope this helps to unbrick
http://motog5szuirom.blogspot.com/2018/01/zui-31-for-moto-g5s-stock-rom.html
dmilz said:
careful with flashing other moto g5s model roms on the xt-1799-2, its different and so you might get a brick. The best you can do is port like i said. You can unlock bootloader by "fastboot oem flashing" if that doesnt work for you try "fastboot oem unlock". I will be back on the pomelo xt-1799-2 soon as i am planning to order another one. Infact you guys will need a section dedicated to the xt-1799-2
Click to expand...
Click to collapse
I agree, a since it is a slightly different phone a independent section can be great. Now, I am not a developer, so things like porting ROMs is not in my skillset, but I understand that selfie cam and nfc will not work on any custom ROM even if ported simply due to driver issue. I have rooted my phone previously, so I was past unlocking. Problem was that I soft bricked moment I pressed 'factory reset' - the phone would just endlessly keep booting into recovery mode, which was strange as it had stock ROM updated by reseller into a global version. Then I tried to flash various custom ROMs without any luck. Pretty much tried any Montana ROM I could find, but as I said, I don't know how to port so I got stuck in recovery loop. Then I found out about Oreo project and tried to fastboot flash that. That was a major mistake. It upgraded bootloader to 7 without me realising this. I found out nfc and selfie camera not working, so I wanted to downgrade to stock chinese firmware and just install gapps manually. After I fastboot flashed the nougat firmware - my phone hard bricked and won't even respond it seems dead. Thus your link will not help. Anyway I am already on a mission to try to revive it using following method: https://forum.xda-developers.com/showpost.php?p=75932514&postcount=1
Thank you anyway and if by chance you stumble upon some cool compatible ROM or to be honest a ROM that works really good - I don't really need NFC, but fingerprint scanner, turbo charger, selfie camera and reasonable battery management (some ROMs apparently drain it too quickly) would surely be features to keep. Also, if you have at hand a guide on how to port these roms which I can learn, I'd be very grateful.
Thank you
Six
sixtheninth said:
Problem was that I soft bricked moment I pressed 'factory reset' - the phone would just endlessly keep booting into recovery mode ...
Click to expand...
Click to collapse
At the moment you could use TWRP menu* 'Reboot - Bootloader' to boot in Fastboot Flash Mode (yes, it's bootloader) - and then press Power button (with 'START' tag in front of it).
But you have preferred to experiment ... You lost bootloader in due of custom 'chinese suppliers' firmware (non-original ROM) and forbidden factory reset with it.
* if you had stock recovery, you need to change mode with Volume buttons to Fastboot Flash Mode - and do the next steps in the same way; also you would be able directly to boot in Fastboot mode (bootloader) using long press Power button + Volume Down button
sixtheninth said:
... Then I found out about Oreo project and tried to fastboot flash that. That was a major mistake. It upgraded bootloader to 7* without me realising this ... I wanted to downgrade to stock chinese firmware ... my phone hard bricked and won't even respond it seems dead ...
Click to expand...
Click to collapse
I warned you in straight way at that my post with a load of links to instructions and threads ('... you will have no way for downgrading of firmware in cause of higher version bootloader ...'). But you are bustler and illiterate, pardon me. By the way... do you know English or just use Google Translate?
* I have some unapproved info that OPP28.65-37[-2] firmware even uses bootloader version 12 (BL: BC12)
sixtheninth said:
Anyway I am already on a mission to try to revive it using following method: https://forum.xda-developers.com/showpost.php?p=75932514&postcount=1
Click to expand...
Click to collapse
Yes, it may be will help you to boot in Fastboot menu. Please, read all method instructions carefully (RTFM!!!), don't experiment on your own risk/luck.
On Russian forum we have some examples of 'reviving' XT1799-2 with XT1794 mmcblk0.img - but it's the question of bootloader version and disk partition. May be now you have either bootloader version 06 and partition again or corrupted/mixed software or something else, so may be you'll be need to use distinct XT1799-2 mmcblk0.img. I have it ('Repair' folder), but there aren't any proved mentions of it's compatibility / applicability / integrality - all our XT1799-2 'bricks' were re-covered with XT1794 mmcblk0.img finally.
If you know Russian language or wanna risk to translate with Google Tranlsate (omg, please, don't do that ) - you may use Russian 4pda forum because at this very moment it has the most full load of info about XT1799-2 flashing and repairing (yes, all Slavs are misers and adventurers) not in Chinese language.
dmilz, I sincerely beg your pardon for messing up in your RR port thread
irewer said:
At the moment you could use TWRP menu* 'Reboot - Bootloader' to boot in Fastboot Flash Mode (yes, it's bootloader) - and then press Power button (with 'START' tag in front of it).
But you have preferred to experiment ... You lost bootloader in due of custom 'chinese suppliers' firmware (non-original ROM) and forbidden factory reset with it.
* if you had stock recovery, you need to change mode with Volume buttons to Fastboot Flash Mode - and do the next steps in the same way; also you would be able directly to boot in Fastboot mode (bootloader) using long press Power button + Volume Down button
I warned you in straight way at that my post with a load of links to instructions and threads ('... you will have no way for downgrading of firmware in cause of higher version bootloader ...'). But you are bustler and illiterate, pardon me. By the way... do you know English or just use Google Translate?
* I have some unapproved info that OPP28.65-37[-2] firmware even uses bootloader version 12 (BL: BC12)
Yes, it may be will help you to boot in Fastboot menu. Please, read all method instructions carefully (RTFM!!!), don't experiment on your own risk/luck.
On Russian forum we have some examples of 'reviving' XT1799-2 with XT1794 mmcblk0.img - but it's the question of bootloader version and disk partition. May be now you have either bootloader version 06 and partition again or corrupted/mixed software or something else, so may be you'll be need to use distinct XT1799-2 mmcblk0.img. I have it ('Repair' folder), but there aren't any proved mentions of it's compatibility / applicability / integrality - all our XT1799-2 'bricks' were re-covered with XT1794 mmcblk0.img finally.
If you know Russian language or wanna risk to translate with Google Tranlsate (omg, please, don't do that ) - you may use Russian 4pda forum because at this very moment it has the most full load of info about XT1799-2 flashing and repairing (yes, all Slavs are misers and adventurers) not in Chinese language.
dmilz, I sincerely beg your pardon for messing up in your RR port thread
Click to expand...
Click to collapse
Well as irony had it, I did the operation literally seconds before I have read your warning. I was desperate of being stuck in either chinese rom or recovery loop. Anyway, I am amidst of transferring mmcblk0.img for XT1795 to my SD drive via Rufus. Problem is that it won't let me to choose GPT only MBR, so I hope that can still work. Another problem is that I don't how to check the actual bootloader version I am having there installed right now should I manage to get there.
sixtheninth said:
Another problem is that I don't how to check the actual bootloader version I am having there installed right now should I manage to get there.
Click to expand...
Click to collapse
The version of installed bootloader you can check in Fastboot Flash Mode (bootloader as actually, Power + Volume Down buttons pressing and so on).
The version of non-installed firmware you can find into special '.info' file, for example: file 'MONTANA_RETCN_NZS26.68-108_cid11_subsidy-DEFAULT_regulatory-DEFAULT_CFC_montana_retcn.info' inside ZUI-based MONTANA_RETCN_NZS26.68-108 ROM has this line:
Code:
MBM Version: BC.06
I used Win 10 and Rufus on XT-1799-2 using XT-1794 and 95 files, both holding power button for over 1min but screen remained black (
sixtheninth said:
I used Win 10 and Rufus on XT-1799-2 using XT-1794 and 95 files, both holding power button for over 1min but screen remained black
Click to expand...
Click to collapse
Because there were Android 7.1.1 images of mmcblk0 with corresponding partition and bootloader version (BC.07; and you may be need BC.08-BC.12 at this moment :shrugging: ).
Have you tried XT1799-2 mmcblk0.img (7.1.1)?
Have you ever found XT1794 Android 8.1.0-based mmcblk0.img ?
[/COLOR]
irewer said:
Because there were Android 7.1.1 images of mmcblk0 with corresponding partition and bootloader version (BC.07; and you may be need BC.08-BC.12 at this moment :shrugging: ).
Have you tried XT1799-2 mmcblk0.img (7.1.1)?
Have you ever found XT1794 Android 8.1.0-based mmcblk0.img ?
Click to expand...
Click to collapse
The results so far are underwhelming. I did the operation in Linux following https://forum.xda-developers.com/showpost.php?p=75932514&postcount=1 . Dowloaded both .img XT1794 and 95, checked the MD5 and flashed them on my sd card. Neither of them worked. Light was flashing at various intervals, but even after two minutes of holding the power button screen remained pitch black. I downloaded your image file for 1799-2, but ended with the very same result. I have not found XT1794 Android 8.1.0-based mmcblk0.img, yet. Would you know anything about it?
1799-2
Hello. I installed OREO 8.1 on MOTO 1799-22. The front camera and NSF do not work. No one will tell you the solution? Thank you friends.
nikolaiderho said:
Hello. I installed OREO 8.1 on MOTO 1799-22. The front camera and NSF do not work. No one will tell you the solution? Thank you friends.
Click to expand...
Click to collapse
But did you recover it from hard brick by using mmcblk0.img based on Oreo?
Have you done with your RR port for xt1799 yet?
I have purchased the xt1799 Green Pomelo,unlocked bootloader,and installed the twrp. I tried to flash many 7.1 Roms that were intended for g5s and always failed. please notify me if you are still working on the port.
I've been having loads of issues with installing Treble ROMs. Currently I'm on the PRA-LX1's most recent update with EMUI 8, (C432) and have only recently found out that Askuccio's TWRP is around. Previously I've been trying and trying with TWRPs like Haky86's which couldn't have even worked because it's built for EMUI 5, I've tried Pretoriano's for the P10 lite, as well as some other random one which is Chinese. Pretoriano's is always unable to mount my /storage/ or /system/ and therefore I can't wipe or flash anything properly, and the chinese one just placed me in a bootloop after flashing the Treble RR ROM.
I now have the Askuccio TWRP and I need to know before I try again - will I get a bootloop, or get in a mess all over again? I can't back anything up beforehand because of encryption and inability to root before switching to a custom ROM. The last times I've tried I've had to keep booting and messing around until eRecovery manages to reproduce itself from seemingly nothing and then redownloads my system firmware again.
Has anyone had proper success? Do you recommend any ROMs to use? I'd prefer RR, Lineage or Omni but at this point anything is fine. Thanks
I'm in the same boat as you. I have had many phones and rooted them all, but somehow the help on this forum lacks detail and consistency. I also have the TWRP installed but can't get any further down the line - where is the root? Can't install custom roms, can't get adaptive SD, just got unlocked bootloader and FWP!
I got the T-mobile REVVLRY+ today, and naturally, I wanted to put the stock motorolla firmware on it. Partly to see if I could, partly to get rid of the T-Mobile bloat and see what Motorola features T-Mobile had removed.
Everything went swimmingly, I have PPW29.98-107 installed, I even have WIFI Calling. What I did lose, however, is VoLTE. I did use TWRP to perform a backup before flashing, so I tried restoring it to get a better look at how VoLTE works in the T-Mobile firmware. This is where things got hairy. I stupidly only backed up boot, system, and data. When I use TWRP to restore them, I get stuck in a boot loop. The built in boot loop fix in TWRP didn't help.
1. Any ideas on getting as close to stock as I can with only the boot, system, and data partitions?
2. Does anyone have access to a REVVLRY+ that would be willing to do a full backup that I may try to restore?
*Edit* SO I used the code *#*#4636#*#* and VoLTE provisioned is enabled, so maybe I do have VoLTE?
*Edit 2* Google Pay doesn't work, even after locking the bootloader. The device says that the operating system has been modified. Still trying to get it to restore.
FOUND IT!
I found a repo of firmware that has the TMO firmware! flashing now!
I can't share the external link yet.
BanterJSmoke said:
I found a repo of firmware that has the TMO firmware! flashing now!
I can't share the external link yet.
Click to expand...
Click to collapse
Where did you find it at? I would like to know because I'm trying to port Lineage OS to this phone. However, once I unlock the bootloader, I won't have an OS to use for it and i'll be screwed.
serris-chan said:
Where did you find it at? I would like to know because I'm trying to port Lineage OS to this phone. However, once I unlock the bootloader, I won't have an OS to use for it and i'll be screwed.
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/lake/official/TMO/
HOW to
Hi, I just picked up the Revvlry+. Do you have step by step to install the Stock Moto firmware? I miss some of the features of the Moto. Also, was it easy to restore the TMO firmware just in case?
did you make any progress into the volte research? im on a unlocked xt1965-2 and using metro but i dont get volte in any of the stock roms or custom roms. i have tried flashing the modem from the stock tmo rom which didnt really do anything. i will probably try to flash the entire tmo rom tonight and see if it boots. im thinking if i get volte in the tmo rom and backup the persist, vendor and efs. then if i restore them onto a working cutom rom with volte enabled, volte should work.
i have also read about different scenarios in where you have to install workarounds to enable volte on treble roms. like installing the ims.apk to route the calls to volte and flashing a volte enabler to inject the correct files into the vendor partition.
my other device is a moto g5 plus which has numerous volte issues when switching between stock and custom roms or between different versions of android.
Did you use the Moto G7 Plus TWRP? I just picked up a Revvlry+ and I'm looking to root to install lawnchair or pixel launcher as a system app.
successfully unlocked the bootloader of my t-mobile revvlry which is a rebranded moto g7 i did it using this method but i'm going to be a little cautious on rooting unless i know it's safe and won't brick i could use some help with this https://www.androidinfotech.com/root-moto-g7-plus-pie/ i have the revvlry not the plus i want to try multirom installer and install ubuntu touch on it but i don't want to screw up my only phone but the only way i can try it is if i had root permissions to do so to install linux tried userland but i couldn't get unity desktop to work i'd rather have full root instead of fakeroot update: i was able to boot twrp before but now it doesn't work i think my firmware updated cause now when i run fastboot boot twrp.img nothing happens and i end up with remote failed reboot the phone and it goes directly to recovery with the only option is to do a factory reset
ghostdogg49504 said:
successfully unlocked the bootloader of my t-mobile revvlry which is a rebranded moto g7 i did it using this method but i'm going to be a little cautious on rooting unless i know it's safe and won't brick i could use some help with this https://www.androidinfotech.com/root-moto-g7-plus-pie/ i have the revvlry not the plus i want to try multirom installer and install ubuntu touch on it but i don't want to screw up my only phone but the only way i can try it is if i had root permissions to do so to install linux tried userland but i couldn't get unity desktop to work i'd rather have full root instead of fakeroot update: i was able to boot twrp before but now it doesn't work i think my firmware updated cause now when i run fastboot boot twrp.img nothing happens and i end up with remote failed reboot the phone and it goes directly to recovery with the only option is to do a factory reset
Click to expand...
Click to collapse
Are you saying with a Tmobile Revvlry, you were able to just go to the Motorola bootloader unlock page, paste your unlock codes, and presto as if it was just a normal Moto phone? If so, that is awesome!
I am thinking of swapping my Moto G7 Play with a Revvlry because of the 3gb RAM and NFC (the size of the G7 Play is perfect, I don't want to be forced to carry around a giant phone), but would love to flash the stock Moto G7 Play ROM over the Tmobile version. Not sure I'm willing to risk it, but if anyone has tried, I'd love to hear about it.
Logged into my account for this. Sorry if this is a little offtopic, but I want to see if this phone is compatible(or rather, how compatible it is) not only with Stock ROMs, but also with custom ROMs. For those REVVLRY owners, what have been your experience with this?
ultracoolguy said:
Logged into my account for this. Sorry if this is a little offtopic, but I want to see if this phone is compatible(or rather, how compatible it is) not only with Stock ROMs, but also with custom ROMs. For those REVVLRY owners, what have been your experience with this?
Click to expand...
Click to collapse
Phone works great with stock ROMs. I haven't tested out any custom ROMs, but I do have root on my REVVLRY.
tri_cchan said:
Phone works great with stock ROMs. I haven't tested out any custom ROMs, but I do have root on my REVVLRY.
Click to expand...
Click to collapse
nice man
Relocking Bootloader
Would I do the OEM lockbootloader command to lock it back
Can confirm flashing Moto g7 play firmware on T-Mobile revvlry. Caveat, you can no longer take OTA's and NFC is broken. Also can be bootloader unlocked through the Moto website.
Wouldn't you need to flash the G7 plus firmware for NFC to work?
guitardoc64 said:
Wouldn't you need to flash the G7 plus firmware for NFC to work?
Click to expand...
Click to collapse
That makes sense, the SD632 is NFC capable however I'm on the G7 play not the plus (I know, I know wrong forum)
I can't get the stock rom to work. It just bootloops every time. I tried all 3 versions. Any ideas?
Hey friends, would one of you kind sould who own the Revvlry+ be kind enough to post this Wallpaper?
Thanks in advance!
BanterJSmoke said:
I found a repo of firmware that has the TMO firmware! flashing now!
I can't share the external link yet.
Click to expand...
Click to collapse
Did you manage to restore it with firmware? Because I have a bootloop and I'm looking for a solution
quiet boy
I just solved the problem I had like 4 crazy hours with solve bootloop, the problem that I commanded automatic flash, not flashing the vendor partition and then flashed the manual vendor partition
mfastboot flash vendor vendor.img and ready
edit:
for users with Revvlry+ variant (XT1965-T) use this Flash.bat
Hi everyone,
I had updated my Galaxy Note 9 with March 2020 update and I am one among many poor souls who are suffering from display discoloration, horizontal lines during low brightness and over heating.
- I have tried all possible methods as suggested by Samsung team in their US community page, tried factory reset multiple times, nothing worked. Took screenshots of the screen and shared it to other to check if the problem is with display, but the screenshots were just fine, no colour distortion or verticle lines. So i am of the opinion that, its basically software glitch in March update.
So, I have some following specific queries. I tried looking for these queries in the forum but did not find any, so, have collated all my queries below:
- My current Bootloader version is 5. Is there any process by which i can downgrade my Bootloader from 5 to 4? I would like to go back to January update.
- If I root my phone and install custom rom (latest version of Linage OS. You guys can suggest a good OS, if you have tried one), will the display problem be solved?
- After installing custom rom as mentioned above, can I go back and install stock firmware with Bootloader version 4?
As you can see, I am just trying to find a solution to come out of display problem. Any other suggestions or any tried and tested solutions are welcome.
Thanks everyone in advance
#note9displayproblems, #note9marchupdate
Nagharjun said:
Hi everyone,
I had updated my Galaxy Note 9 with March 2020 update and I am one among many poor souls who are suffering from display discoloration, horizontal lines during low brightness and over heating.
- I have tried all possible methods as suggested by Samsung team in their US community page, tried factory reset multiple times, nothing worked. Took screenshots of the screen and shared it to other to check if the problem is with display, but the screenshots were just fine, no colour distortion or verticle lines. So i am of the opinion that, its basically software glitch in March update.
So, I have some following specific queries. I tried looking for these queries in the forum but did not find any, so, have collated all my queries below:
- My current Bootloader version is 5. Is there any process by which i can downgrade my Bootloader from 5 to 4? I would like to go back to January update.
- If I root my phone and install custom rom (latest version of Linage OS. You guys can suggest a good OS, if you have tried one), will the display problem be solved?
- After installing custom rom as mentioned above, can I go back and install stock firmware with Bootloader version 4?
As you can see, I am just trying to find a solution to come out of display problem. Any other suggestions or any tried and tested solutions are welcome.
Thanks everyone in advance
#note9displayproblems, #note9marchupdate
Click to expand...
Click to collapse
From what i've read, 5 to 4 is impossible.
Rosli59564 said:
From what i've read, 5 to 4 is impossible.
Click to expand...
Click to collapse
There should be some or the other way around for this. May be some developer should help us out here.
Nagharjun said:
Hi everyone,
I had updated my Galaxy Note 9 with March 2020 update and I am one among many poor souls who are suffering from display discoloration, horizontal lines during low brightness and over heating.
- I have tried all possible methods as suggested by Samsung team in their US community page, tried factory reset multiple times, nothing worked. Took screenshots of the screen and shared it to other to check if the problem is with display, but the screenshots were just fine, no colour distortion or verticle lines. So i am of the opinion that, its basically software glitch in March update.
So, I have some following specific queries. I tried looking for these queries in the forum but did not find any, so, have collated all my queries below:
- My current Bootloader version is 5. Is there any process by which i can downgrade my Bootloader from 5 to 4? I would like to go back to January update.
- If I root my phone and install custom rom (latest version of Linage OS. You guys can suggest a good OS, if you have tried one), will the display problem be solved?
- After installing custom rom as mentioned above, can I go back and install stock firmware with Bootloader version 4?
As you can see, I am just trying to find a solution to come out of display problem. Any other suggestions or any tried and tested solutions are welcome.
Thanks everyone in advance
#note9displayproblems, #note9marchupdate
Click to expand...
Click to collapse
I am facing same issue ...display distortion from 20% to 80% ..after that display looks fine.
I tried to downgrade to pie ..still no success...it has same issue...
I also believe that its software issue or some connection issue
Sue samsung for trying to force user to change screen. Samsung's screen is so expensive. Apple was fined for throttling the iphones.
I have same issue on my N9600... :'(
What is causing the distortion? Sofware bug? Can shot a picture showing the issue?
Jlozde said:
What is causing the distortion? Sofware bug? Can shot a picture showing the issue?
Click to expand...
Click to collapse
Ita all over the internet. Just Google Samsung galaxy note 9 display discoloration.
I don't know if this will solve your problem but you would be able to flash a Android 9 ROM on a Android 10 bootloader. If you're like me you hate Android 10. What you do is you flash Android 9 bootloader made for twrp flash the Android 9 rom of your choice. Than flash the Android 10 bootloader that you want via Odin, than fastly reflash twrp for Android 10
For me it works but I kind of jerry-rigged it to work. I regret every day updating to Android 10 but since I'm able to still run Android 9 on an Android 10 bootloader, I'm okay with that.
Hope this kind of help you.
Nagharjun said:
Hi everyone,
I had updated my Galaxy Note 9 with March 2020 update and I am one among many poor souls who are suffering from display discoloration, horizontal lines during low brightness and over heating.
- I have tried all possible methods as suggested by Samsung team in their US community page, tried factory reset multiple times, nothing worked. Took screenshots of the screen and shared it to other to check if the problem is with display, but the screenshots were just fine, no colour distortion or verticle lines. So i am of the opinion that, its basically software glitch in March update.
So, I have some following specific queries. I tried looking for these queries in the forum but did not find any, so, have collated all my queries below:
- My current Bootloader version is 5. Is there any process by which i can downgrade my Bootloader from 5 to 4? I would like to go back to January update.
- If I root my phone and install custom rom (latest version of Linage OS. You guys can suggest a good OS, if you have tried one), will the display problem be solved?
- After installing custom rom as mentioned above, can I go back and install stock firmware with Bootloader version 4?
As you can see, I am just trying to find a solution to come out of display problem. Any other suggestions or any tried and tested solutions are welcome.
Thanks everyone in advance
#note9displayproblems, #note9marchupdate
Click to expand...
Click to collapse
Hi Bro, the same problem here. We have created a group to discuss about the issue. Plz join there and will discuss about this.
https://t.me/samsungDisplayProblem
We have a temporary fix for this but also trying for permanent fix which can solve our issue.
---------- Post added at 01:42 PM ---------- Previous post was at 01:39 PM ----------
sagarabhiwant said:
I am facing same issue ...display distortion from 20% to 80% ..after that display looks fine.
I tried to downgrade to pie ..still no success...it has same issue...
I also believe that its software issue or some connection issue
Click to expand...
Click to collapse
Hi Bro, we are also facing the same issue so we have created a Telegram group to discuss about this and gathering all with this problem. Plz join there.
https://t.me/samsungDisplayProblem
We have two to three temporary fixes but we also trying for permanent fix.
this.guy.lol said:
I don't know if this will solve your problem but you would be able to flash a Android 9 ROM on a Android 10 bootloader. If you're like me you hate Android 10. What you do is you flash Android 9 bootloader made for twrp flash the Android 9 rom of your choice. Than flash the Android 10 bootloader that you want via Odin, than fastly reflash twrp for Android 10
For me it works but I kind of jerry-rigged it to work. I regret every day updating to Android 10 but since I'm able to still run Android 9 on an Android 10 bootloader, I'm okay with that.
Hope this kind of help you.
Click to expand...
Click to collapse
hi i have the same problem and i want downgrade to andoid 9 from 10
can you explain how to do it
thanks
majedabbas said:
hi i have the same problem and i want downgrade to andoid 9 from 10
can you explain how to do it
thanks
Click to expand...
Click to collapse
only way is to trip knox by rooting and then flashing an android 9 rom. as you know once it has been tripped you will instantly lose access to samsung pay, secure folders etc. however on the plus side you have the choice of root or non root.
Hi guys,
Me and my mum are experiencing a similar situation.... I'm trying to downgrade my galaxy Note8 boot-loader, everything was working till I press the button to upgrade. Now I cant use any memory card all i see is 'the Sandisk card is not supported' and for my mum's Note 9 when she activates the biometric sensor the phone restarts each 15 - 30 mins. I always bought Samsung but now I'm considering to don't do it anymore...
How do you install android pie over android 10 BL
this.guy.lol said:
I don't know if this will solve your problem but you would be able to flash a Android 9 ROM on a Android 10 bootloader. If you're like me you hate Android 10. What you do is you flash Android 9 bootloader made for twrp flash the Android 9 rom of your choice. Than flash the Android 10 bootloader that you want via Odin, than fastly reflash twrp for Android 10
For me it works but I kind of jerry-rigged it to work. I regret every day updating to Android 10 but since I'm able to still run Android 9 on an Android 10 bootloader, I'm okay with that.
Hope this kind of help you.
Click to expand...
Click to collapse
can you please tell how to install android pie over android 10 BL?
only way is to trip knox root and then flash/ if you dont want to trip knox its not possible
A|ex said:
only way is to trip knox root and then flash/ if you dont want to trip knox its not possible
Click to expand...
Click to collapse
Hi, ok so assuming we don't care about tripping knox, rooting and flash.. still, how would this be done?
I'm on a SM-N9600 atm, with latest Android 10, rooted and TWRP installed. Where do I find a custom Android 9 Rom (compatible with my model) that I can flash via TWRP?
Thanks in advance
Stefo2332 said:
Hi, ok so assuming we don't care about tripping knox, rooting and flash.. still, how would this be done?
I'm on a SM-N9600 atm, with latest Android 10, rooted and TWRP installed. Where do I find a custom Android 9 Rom (compatible with my model) that I can flash via TWRP?
Thanks in advance
Click to expand...
Click to collapse
All you do is just flash the android 9 rom. Downgrading the bootloader makes no difference if you have already unlocked it. The whole point of it is for people who are on later bootloaders and still have knox and want to go to android 9 which is not possible without the trip.
A|ex said:
All you do is just flash the android 9 rom. Downgrading the bootloader makes no difference if you have already unlocked it. The whole point of it is for people who are on later bootloaders and still have knox and want to go to android 9 which is not possible without the trip.
Click to expand...
Click to collapse
Hi @A|ex , thanks for your answer. I still don't know where I can find a custom Android 9 rom, compatible with Note 9 snapdragon (SM-N9600) that I could flash via TWRP... (Assuming it's impossible to flash stock Android 9 via Odin even if my phone is currently already rooted on latest Android 10 (bootloader == 5).
Here on XDA there are some ROMs for the Exynos model but nothing except the 'WETA' rom for Snapdragon model, which is not a full rom anyway from what I understand.
If you could shed some light on this it would be much appreciated: where can I find a custom Android 9 rom, flashable via TWRP, compatible with a rooted SM-N9600 (currently on latest Android 10, with a BL==5, unlocked)?
Thanks again for any help!!
I read the lineage documentation for installation, but I got pretty lost.
In the parts of Booting a custom recovery using fastboot and Ensuring all firmware partitions are consistent.
These parts I read and did not understand, and if possible I would like help.
I've already managed to unlock the bootloader and install root on the device via magisk.
If anyone who has already managed to install can help me, thank you.