[HELP]I can't put my device into flash mode - Sony Xperia X Performance Questions & Answers

I flash my device and error, and I can't flash it again, flash mode can't detected. I tried to install twrp and custom rom but error because system is unmount. please someone help me.

Related

Personalized ROM or Zip format of Xperia Xa1

Good day
Try to root my Xperia Xa1 but also trying to install the recovery through fastboot was left without OS al.ingresar to the recovery install the super user but still no OS, now I try to install it through del.recovery but it is necessary a ROM in Zip or IMG format and the truth I can not find anywhere.
Please if someone has a ROM in this format or knows how I can do it to install the OS I would be very grateful.
Note: I tried to enter the ROM using this method because my cell phone only connects to the flash tool in fastboot mode, because when I went through the recovery installation process, it damaged my entry in flash mode.

Pease help me unbrick asus memopad me170c (K017)

my tablet (asus me170c) was hard bricked for a long time and only usb logo showed up. using this amazing guide and using xftk tools I managed to make droidboot available but I can't boot into recovery or system. fastboot detects the device but adb doesn't. I read all similar xda treaths and downloaded about 5 or 6 roms (including raw rom) and started trying the following(but none worked:crying: ):
1-first i tried to boot into recovery and flash latest rom but sadly the tablet won't boot into recovey and SD update is not available in droidboot.
2-then i downloaded ASUS flash tool to flash raw rom but even though all drivers are installed and i can see my tablet in device manager phone flash tool doesn't detect the device :crying:
3-since there is no custom recovery for this specific model, i tried flashing me176cx unofficial twrp by fastboot: fastboot flash recovery twrp.img but it didn't flash recovey with sign_key ROS error (but boot.img and fastboot.img were flashed successfully. and i also tried flashing the raw frameware's system.img with fastboot and it was flashed successfully but nothing changed and the device is still stuck on intel logo.
4-as my last chance, I tried booting into temporary tethered twrp and it booted! but the touch screen didn't work. then I booted temporary cwm but it can't flash any of frameware zip files on external sd card even though it detects them! with erorr closed:0. and It can't load internal storage. there was also an adb sideload option in cwm and after enabling it adb finally detected device but adb sideload zip file failded with the same closed:0 error
5-I also tried Intel flash tool and it detects the device but says the firmware xml file is invalid both stock rom and raw rom have the same error.
I thought making it into fastboot will make reviving my tablet easy but it didn't.
please help, I don't know what else to do i need this tablet for reading books.

Unbrick and clean install Rom for zuk z2 pro

I think my zuk z2 pro is (half) bricked. It was working fine with prevous aex rom but I thought it was time to update rom.
I have copied the rom to phone and started in twrp recovery to install aosp rom and got error 7.
I have tried to get in fastboot to update twrp 3.4.0-0 and wiped data, cache, dalvik etc. Then I got the same error 7 and vendor message in twrp when I try install aosp rom.
Qfil not worked for me. Download fail: Switch To EDL FailFAiled to Swit to Emergency Download mode.
With adb I get now error: device '(null)' not found.
What can I do now after tried different steps. I don't know which is the best step and how to unbrick?
-install another twrp?
-How to transfer and install rom now, by recovery, adb/fasboot, qfil?
-Need stock firmware or doesn't matter?
My phone is rooted.
I appreciate any tips and help.
delimavi said:
I think my zuk z2 pro is (half) bricked. It was working fine with prevous aex rom but I thought it was time to update rom.
I have copied the rom to phone and started in twrp recovery to install aosp rom and got error 7.
I have tried to get in fastboot to update twrp 3.4.0-0 and wiped data, cache, dalvik etc. Then I got the same error 7 and vendor message in twrp when I try install aosp rom.
Qfil not worked for me. Download fail: Switch To EDL FailFAiled to Swit to Emergency Download mode.
With adb I get now error: device '(null)' not found.
What can I do now after tried different steps. I don't know which is the best step and how to unbrick?
-install another twrp?
-How to transfer and install rom now, by recovery, adb/fasboot, qfil?
-Need stock firmware or doesn't matter?
My phone is rooted.
I appreciate any tips and help.
Click to expand...
Click to collapse
Try to install twrp 3.2.1.0.
delimavi said:
I think my zuk z2 pro is (half) bricked. It was working fine with prevous aex rom but I thought it was time to update rom.
I have copied the rom to phone and started in twrp recovery to install aosp rom and got error 7.
I have tried to get in fastboot to update twrp 3.4.0-0 and wiped data, cache, dalvik etc. Then I got the same error 7 and vendor message in twrp when I try install aosp rom.
Qfil not worked for me. Download fail: Switch To EDL FailFAiled to Swit to Emergency Download mode.
With adb I get now error: device '(null)' not found.
What can I do now after tried different steps. I don't know which is the best step and how to unbrick?
-install another twrp?
-How to transfer and install rom now, by recovery, adb/fasboot, qfil?
-Need stock firmware or doesn't matter?
My phone is rooted.
I appreciate any tips and help.
Click to expand...
Click to collapse
Try to roll back twrp 3.2.1.0-0. I couldn't install any rom with last twrp. Everything is fine until I used twrp 3.2.1.0-0.
delimavi said:
I think my zuk z2 pro is (half) bricked. It was working fine with prevous aex rom but I thought it was time to update rom.
I have copied the rom to phone and started in twrp recovery to install aosp rom and got error 7.
I have tried to get in fastboot to update twrp 3.4.0-0 and wiped data, cache, dalvik etc. Then I got the same error 7 and vendor message in twrp when I try install aosp rom.
Qfil not worked for me. Download fail: Switch To EDL FailFAiled to Swit to Emergency Download mode.
With adb I get now error: device '(null)' not found.
What can I do now after tried different steps. I don't know which is the best step and how to unbrick?
-install another twrp?
-How to transfer and install rom now, by recovery, adb/fasboot, qfil?
-Need stock firmware or doesn't matter?
My phone is rooted.
I appreciate any tips and help.
Click to expand...
Click to collapse
I replied to your double-post already in the other thread:
tiggerle666 said:
As far as I understand, you still can access fastboot mode on startup and flash new versions of twrp?
I just had a bricked phone again, it took me many hours to find out, what went wrong:
The main problem is that when you connect the phone with USB, it shows up as COM 900 and not as COM 9008.
In my case, I the different button combinations didn't work to change that mode (but sometimes it is possible look for an older post of me). If this doesn't help, you need to use a deepflash-usb cable (basically you remove the isolation of the green and black wire and hold them together) while plugging in and simulatously press power + vol down. Then your phone will switch to 9008. Now you should be able to use QFIL. In my case the installation of QFIL was broken and I just had to reinstall it (before, it always had many error messages). And you have to start the download process in QFIL very quick after you connected your phone in 9008 mode.
You don't need adb at this stage, the command "fastbood -i 0x2b4c flash recovery twrp_xyz.img" would just be enough to flash your twrp.
Hope this helps, just reply if you need anything and I'll try to help!
Click to expand...
Click to collapse

Pixel 5 is broken after flash

Hello, I wanted to free my pixel 5 (android12) from google and install the e.foundation os. I managed to unlock the bootloader. At further step something must have gone wrong and I came only in the recovery mode. Then I flashed TWRP and wanted to install android 11 from there. I did not know which version for my phone is the right one. TWRP has any errors displayed. I have a few years ago on another phone made a custom rom flash on it and thought I know what I'm doing but thought wrong. I selected all the check marks in the wipe data menu and formatted everything. Then nothing worked and the phone went into bootloop. Now I managed to get into the recovery mode. But I can not flash TWRP or rom. Can someone maybe give me a tip? or do I now have a 500 euro expensive stone here.
I am grateful for any advice. this flashing is very complicated for me a I had it somehow easier in memory.
I speak german and the text was created with deepl
there is a photo of the screen
Okay you can try this
Download ADB AND MINIMAL FASTBOOT
Download TWRP
1. Open ADB AND MINIMAL FASTBOOT
2. Type fastboot flash recovery /path/to/twrp.img
3. Try reboot to recovery mode.
4. If you can reboot to recovery mode (TWRP) - Copy stock rom to device and flash it.
I have also tried this with TWRP but i always get the error message:
FAILED (remote: Not allowed to flash (recovery))
i have also tried several roms to flash after unpacking.
fastboot flash bootloader runs through
fastboot flash radio runs through successfully
fastboot update image but not
and ends with the message:
FAILED (remote: Partition should be flashed in fastbootd).

No OS after flash Raw Rom

Hi guys , i have some problems, i was tryng to update the firmware from old one to WW-ZS661KS-31.0210.0210.236-REL-2206-M3.35.19.25-ASUS_1.1.5-user-20220722 , i have fallowed the istruction and i had run the zs661ks_raw_flashall.bat file, but then i find out there is no OS on my phone. i can enter to Recovery, and my pc can see it when i plug it in fastboot mode , but i can't be able to install anything over now, if i try to flash a custom rom via Tool All in one, i get this error :
Step 1/2Error applying update: 7 (ErrorCode::kInstallDeviceOpenError)Updater process ended with ERROR: 1
To flash additional zips, please reboot recovery to switch to the updated slot.
Error installing zip file '/lineage-18.1-20221023-nightly-obiwan-signed.zip'
does anyone have a solution?
Thanks

Categories

Resources