Related
Steps to install Treble ROMs on Galaxy J7 Prime.
Prerequisite:
1. Flash TWRP recovery. For Treble Project I suggest version 3.2.1 here because there is an issue about mounting /preload partition with 3.2.3+. You can try newer versions for your choices. If you see /preload error, Some suggested to ignore this error.
2. For emergency, please download Stock ROM here. If you accidentally mess up your partitions or consistently bricks, Stock ROM will reset everything back to start.
Needed Files:
1. Files from Project Spaget X here.
Exynos7870_CreateVendor.zip is to create /vendor partition.
Exynos7870_ProjectSpaget_V3.0.zip is to install necessary for Treble Project.
Exynos7870_RevertVendor.zip is to delete /vendor partition, in case of uninstalling Treble Project.
2. Treble ROM with ARM64 A only here. My favorite Treble ROMs are Lineage, Arrow and Havoc. I am currently using Arrow.
3. ARM64 GAPPS here.
4. Kraken Kernal here or here. Please download for Treble only. RC12 is universal.
5. Magisk here.
Step I Flash Treble project:
1. boot TWRP recovery
2. wipe Data, Cache, Dalvik, System
3. flash Exynos7870_CreateVendor.zip and reboot to recovery
4. flash Exynos7870_ProjectSpaget_V3.0.zip
Step II Flash Treble ROM:
1. flash Treble ROM ARM64 A only, no need to reboot to recovery in order to install the ROM.
Edit: Reboot to Recovery > Install > press Install Image > choose your Rom.img
2. After flashing the ROM, I usually reboot to system in order to test whether or not the flashed ROM can boot nicely.
2.1 If the flashed ROM cannot boot or brick or bootloop in Logo, press Home + Power + Vol Down to force reboot to Bootloader and boot to recovery.
2.2 Back to recovery. wipe Data, Cache, Dalvik, System
2.3 flash Exynos7870_ProjectSpaget_V3.0.zip before flashing new Treble ROM.
Step III Flash ARM64 GAPPS:
1. Choose Wipe > Advanced Wipe > choose System > Repair > Resize. Sometimes you need to do this twice in order to resize since the first time will show error.
2. flash GAPPS
Step IV Flash Kraken Kernal:
1. Mount > System and Vendor partitions
2. flash KRAKEN-Kernel-RC12-universal7870-Treble-20200314.zip (The latest version of Kraken)
3. reboot to system
I usually reboot once to system before flashing Magisk.
Step V Flash Magisk:
1. Mount > System and Vendor partitions
2. flash Magisk to root
3. reboot to system
4. run Play Store and set up your account
5. run Magisk Manager. When you press Tap to start SafetyNet check, you will find out that ctsProfile: false.
Please note that Usually it will be installed when you have GAPPS installed. If not, you can install Magisk Manager manually.
6. choose Downloads > search "SafetyPatch by hackintosh" > download and install > reboot This will fix ctsProfile false to be true.
Now you are done the basice steps to flash Treble ROMs for your J7 Prime. Any questions please leave a message under the thread.
Cheers, :highfive::highfive::highfive:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
Click to expand...
Click to collapse
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help
dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help
Click to expand...
Click to collapse
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.
siamese007 said:
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.
Click to expand...
Click to collapse
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much
dctviphb2 said:
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much
Click to expand...
Click to collapse
You're welcome. I honestly never experience this kind of error.
I found a solution about this error on youtube.
This solution is to extract ROM file and edit updater-script file with notepad++.
Edit: try this Spaget X file. I followed this youtube tutorial trying to fix error 7 that you got when flashing Spaget X.
Another possibility of this error is Partition messed up.
I would try to flash stock ROM with Odin to reset everything to factory default.
Caution: Back up your data before flashing Stock ROM.
Follow the instruction of how to flash Stock ROM in the Stock ROM page or here. Flashing Stock ROM will also remove TWRP recovery and re-partition.
Hope one of this solution help, :highfive::highfive::highfive:
Thank you so much. I think the problem is I am using HROM, which has Repatition.zip, so I think that my partition has messed up, that the reason I face the issue. I will try to solve it with your idea. Thanks so much for helping me, if I can solve the problem I will tell you
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
That's great NEWS. You've managed to find a solution for No OS installed error.
By the way, for the deep sleep problem that you mentioned, I also experience the same thing. My solution is to press home button to immediately wake the phone up from deep sleep.
[HELP]Treble Incompatible device (J7 PRIME)
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone
hussain_mdj said:
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone
Click to expand...
Click to collapse
Unpack .xz file
TWRP still doesn't detect the image
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
...
---------- Post added at 12:53 AM ---------- Previous post was at 12:48 AM ----------
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
i'm dummy dum so forgive and thenk
dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
There is a solution...in phh treble settings go to doze then turn on out of pocket feature....works like a charm for me.....
------------
HAPPY TO HELP..
Installing Lineage
Few quick things.
LOS 18.1 is now official so the guide will now just be covering that.
I also want to address a common question, you can use Windows for this process. I prefer Linux, and Fastboot just works in Linux without driver issues. If you have Fastboot and ADB working in Windows already feel free to use that if you want.
Frequently asked Questions:
This looks like a lot of work, is there an easier way to install? Try the LOS Wiki Method.
Using TWRP 3.5.2_9-01. Start off Fresh. Install OOS using the Fastboot ROM.
Start off with a fresh install of OOS. You need the latest version of OOS 10. I typically use a the fastboot ROMs for this as it will do both slots for me at once. (Alternatively you can use TWRP and install the ZIPs and do it twice to get it on both slots, or my least favorite, the MSM Tool if you want. Doesn't matter how OOS ends up on both slots, as long as it ends up on both slots.)
I use Linux, and honestly I feel like it's easier and more reliable for fastboot and ADB so that's what I'm including here in these steps. It's easy to boot from a USB.
To create a bootable Linux flash drive you can use Unetbootin, which you can download for free here (Your other option would be to burn the ISO straight to a DVD and skip the unetbootin step):
https://unetbootin.github.io/
For Linux, I'm using Linux Mint Cinnamon, You can download for free here:
https://www.linuxmint.com/download.php
Then run unetbootin (yours will look a little different, I'm running it in Linux):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Point it to the Linux ISO, and tell it where an empty flash drive is. It will erase everything on the flash drive. Afterwards you can load whatever you want on the flash drive. However be aware when booting Linux from this drive you can't access what is on the drive (at least not by normal methods).
After this has successfully completed, reboot the PC, and boot from the USB drive. Your PC will boot into Linux (turning off the PC and removing the USB drive will make it boot up like normal again).
Next we need to install fastboot and adb. You need to open up the "start menu" and open the "synaptic package manager". You can find this stuff in the menus, however the easiest way to get to these items is to just start typing the name of the item. See below:
Search fastboot, click the boxes, choose install. Then search for ADB, click the boxes, choose install and then click apply. It's that easy it will download everything that's needed and install.
Time to open up a terminal:
Just to make sure we don't run into any problems we need to update adb and fastboot. In the terminal run these commands to update fastboot and adb (this is downloading them directly from Google).
wget https://dl.google.com/android/repository/platform-tools-latest-linux.zip
unzip \platform-tools-latest-linux.zip
sudo cp platform-tools/adb /usr/bin/adb
sudo cp platform-tools/fastboot /usr/bin/fastboot
You will also need the appropriate fastboot ROM. Fastboot ROMs available in this thread. The catch being that thread is no longer updated. So we will need to make our own fastboot rom. To do this we need two things:
1. The stock rom zip (OP Site).
2. Payload dumper. I've yet to get the one from the GitHub link to work, so I've been using the one from this Article. Direct Download Link
You need to extract the payload.bin file from the stock rom zip. Extract the payload_dumper files as well, and place everything in the same folder. Payload_dumper requires python3. Open up Synaptic again, search for python3.6 and install it. Now open a terminal so we can extract the images from the payload.bin.
Navigate to the location of payload_dumper and your payload.bin file. In my case my commands are:
cd Desktop <-- switches to the Desktop folder
cd payload_dumper <-- switches to the payload_dumper folder on the Desktop
python3 payload_dumper.py payload.bin <-- runs the payload_dumper "program" and extract the images from the payload.bin
Now would be a good time to back everything up. The phone will get wiped. Extract the fastboot images to a folder that is easy to find. I would recommend the Desktop.
Now it's time to flash all those images we just extracted using payload dumper. Place the phone in fastboot mode. You can do this using the advanced reboot menu, ADB, or the key combinations (all key combos listed below for reference):
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
You can flash the images one by one or use a script. My script is available here. Flashing the fastboot ROM should look something like this:
That image explained:
cd Desktop <-- Switched the directory to the Desktop the default directory when you open up the terminal is the /home directory.
cd flash <-- I put my fastboot images in a folder called flash. This stuff is case sensitive. My folder was all lowercase.
sudo fastboot devices <-- Is just checking to see if my PC can see my phone, and making sure it's in fastboot. Sudo is necessary for this distro, as both fastboot and ADB must be run as root.
sudo sh FlashThese.sh <-- Tells the terminal to run my script, since the script contains fastboot commands it must be run as root.
At the end you should get something like this:
Then just choose start form Fastboot (If you were previously on a custom ROM go straight to recovery and wipe everything). Not booting and getting dumped off at the OnePlus recovery screen is nothing to worry about. Choose your language of choice, Wipe data and cache, Erase everything (Music, pics, etc), This can not be undone, continue. After that the phone will boot. Once booted enable developer options, advanced reboot, and reboot to fastboot.
2. Installing TWRP.
First step is to boot the correct TWRP image. Grab the current TWRP from the official site. You need both files, the img file, and the installer. Once again from the terminal:
The image explained:
cd Desktop <-- Switched the directory to the Desktop the default directory when you open up the terminal is the /home directory.
sudo fastboot devices <-- Is just checking to see if my PC can see my phone, and making sure it's in fastboot. Sudo is necessary for this distro, as both fastboot and ADB must be run as root.
sudo fastboot boot twrp-3.5.2_9-0-fajita.img * <-- Sends that TWRP image to the phone to be booted temporarily. Only boot this, never run the command "flash".
Once in TWRP the phone should show up as a media device so you can copy files to it. Copy the TWRP installer over to it. Choose Install from the TWRP menu and navigate to where you placed the TWRP installer. Press on it, and swipe to confirm flash. When it is done hit the back button until you are back out to the main menu.
From the main menu choose reboot, and choose Recovery:
The first time you try and reboot the official version of TWRP it will ask you if you want to install the TWRP app. Do NOT install the app. In the settings you can disable this prompt. Your other option is just uncheck both boxes at the screen you see below when you get to it, and then click the button that says do not install. Do use the slider. At that point the phone will reboot as to recovery as you selected.
Now that you are back in TWRP that is now installed, time to wipe the phone. From the main menu choose Wipe. Swipe the factory reset slider at the bottom. Then hit back. Next hit Format Data. Type Yes to Continue. Hit back to continue. Keep hitting back till you get to the main menu.
Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. So go back into the reboot menu, choose reboot to recovery again (swipe to allow modifications if it asks). You must do this after formatting data.
3. Install Lineage
Links:
Lineage 18.1 XDA Thread
Official 6T Lineage Downloads
The phone should still be in TWRP at this point. You now need to copy Lineage to the phone. From TWRP's main menu choose install. Then navigate to your ROM .zip location and click on it. Then swipe to confirm flash.
Lineage will replace TWRP, so you need to reflash TWRP as well. Run the TWRP installer again. If it's not on the phone, just copy it over again real quick. On A/B devices ROMs get flashed to the opposite slot. Things like Gapps, Magisk, etc get flashed to the current slot. We need Lineage on both slots, so it must be flash again. Flashing it twice only needs to be done the first time as we need to get rid of OOS. For updates it just gets flashed once. After the TWRP installer has run, back out to the main menu, and choose reboot, then recovery:
Once back in TWRP flash Lineage again. From TWRP's main menu choose install. Then navigate to your ROM .zip location and click on it. Then swipe to confirm flash.
Now run the TWRP installer again. Back out to the main menu, and reboot to recovery.
4.Optional, Gapps
Links:
NikGapps <-- For Lineage 18.1 (Use the R Folders for Android 11. I recommend the "Core" version. I also tested Basic though if you want that level of Gapps. I strongly recommend you grab setup wizard out of the R Addons Folder, I used the regular setup wizard, not the pixel one.)
MindTheGapps <-- It's worth mentioning here Lineage recommends MindTheGapps for 18.1. Take your pick. I personally use NikGapps as I can use a "leaner" Gapps package.
Now that your phone is back in TWRP for the last time before booting up Lineage, it's time to install Gapps if you want them. This step is optional. Same as the other steps here, go to install, choose your OpenGapps package, Then navigate to your .zip location and click on it. Then swipe to confirm flash.
5. Very Optional, Magisk
These steps are very optional. However this is how I, root, pass safety net, and get a various apps to appear in the Play store.
Flash Magisk in TWRP. For Magisk 23, you now have to rename the Magisk.apk to Magisk.zip. Then flash it in TWRP. If you wanted to uninstall it, you rename it to uninstall.zip. If you already had an older version of Magisk installed, make sure you do not have it hidden / nenamed when installing Magisk 23 for the first time. Restore the original package before installing 23.
Magisk <-- Flash this right after Gapps.
These items are add-ons are flashed in Magisk after the first boot (Don't flash these in TWRP anymore):
MagiskHide Props Config
Busybox
To flash modules in Magisk press the puzzle piece icon. Then choose install from storage. Now just choose your addons. After flashing the icons it will have a reboot icon at the bottom. You can reboot or you can press back and flash another. After you are done reboot.
You will also need a Terminal Emulator. I personally use:
Terminal Emulator for Android
Once all these are installed the first step is setup Magisk. Under Magisk go to settings:
In version 20.4+ Magisk Hide is no longer on by default. So make sure the Magisk Hide, Hide Magisk from various forms of detection switch is flipped. Then press Hide Magisk Manager. This will bring up a box for you to choose a random name for the Magisk Manager, type whatever you want here. You can leave it Manager if you wish, but I typically change this.
Now open Magisk again. It will ask you to download it again, click ok, then manually open the app again as it says. Now we need to open Magisk hide. This is now under the shield icon, then click the arrow at the top:
These are the apps you don't want to know that you have root. Less is better. You can cause instability problems by just choosing everything. My general rule of thumb is, Google, steaming video, music, and payment apps get selected. In my experience if I come across an app that needs it and I didn't select it, I just clear cache and/or data and re-open the app and it works. There are some big multiplayer apps that ban hardware / people, so do your research (don't ask me, I don't play those games).
Next time to change the device fingerprint using MagiskHide Props Config Module. We do this using the terminal emulator. In the terminal emulator, type "su" to gain root privileges. Then type props to run the module:
Now it's just following the menus. Choose option 1 - Edit device finger print. (type 1, hit enter)
After this you will see a menu of devices. It doesn't matter what device you pick really. If you want apps / Google to think you have a OPPO or Samsung pick one of those Fingerprints. However there's a bit more to passing Safety-net than that. Since Google has changed how things work not all those fingerprints that used to work will work now. Also now you may get an error when you turn on the phone because of the security dates. The OP6T Android 10 fingerprint has no issues at this point, so use that if you want:
After choosing the fingerprint you want, it will ask you if you want to reboot. Choose yes. After rebooting, you may need to clear the cache from the play store for some apps to appear in it. You should now pass safety net. Check this in Magisk:
6. Very Optional, Ad Blocking with a Host File.
You can block many things with a hosts file, most popular would be ads. I've been use StevenBlack's host file which is a compilation of several hosts files. This is located on Github:
https://github.com/StevenBlack/hosts (Scroll down you'll see the options of what you can block)
Direct link to the hosts file I use. This will block Adware / Malware.
Unfortunately for quite some time now on this device you can no longer just use a root browser to swap the hosts file. The easiest way is to use TWRP.
First we have to make the hosts file. The hosts file must use unix / linux line endings. If you are using linux, don't worry about this, just create the file. If you are using Windows, the easiest thing to do is use Notepad++ (Free).
Notepad++ Downloads
Next one other caveat. The hosts file is quite large. I've never had much luck copy and pasting it from any other browser than Firefox (Windows or Linux), but however you get it into Notepad++ is not a big deal.
Once in you have the hosts file into Notepad++ go to Edit, EOL Conversion, and Choose Unix (LF).
Now save the file as "hosts" no ending. This does mean under file type you will need to change it to All File types *.*. Move this hosts file to your phone. Then reboot to recovery. From the main TWRP menu, choose mount. Then mount system:
Hit the back button and go to the advanced menu. Choose File Manager:
You will find your hosts file under /sdcard, wherever you placed it. In my case I placed it in a folder called ROMs. Once you locate it, press and hold it for a moment, and relase. Then choose copy file:
At this point you need to tell TWRP where you want to paste the hosts file. It belongs in the /etc folder. The only hic-cup here is depending on what you were doing in TWRP this could be (on this device) /system/etc or /system/system/etc (you will see similar folders to the image below if you are in the right place). Once you are there, press "paste?" button in the lower right corner:
After this just swipe to confirm:
You can now reboot the device, and your hosts file should now be in place. Your ad block should now be active for all apps as it's global for all connections.
7. Reboot to system.
Updating Lineage
1. Flash Lineage.
Reboot to recovery. You can use the advanced reboot menu, or Volume Down + Power while turning the phone on. Don't wipe anything. From TWRP's main menu choose install. Then navigate to your ROM .zip location and click on it. Then swipe to confirm flash.
Lineage will replace TWRP, so you need to reflash TWRP as well. Run the TWRP installer again. After the TWRP installer has run, back out to the main menu, and choose reboot, then recovery:
2. Optional, Gapps (if you installed them once you must continue to install them or do a clean install)
Links:
NikGapps
Now that your phone is back in TWRP for the last time before booting up Lineage, it's time to install Gapps if you want them. This step is optional. Same as the other steps here, go to install, choose your OpenGapps package, Then navigate to your .zip location and click on it. Then swipe to confirm flash.
3. Reboot to system.
Last updatedSince I don't want people to have to wonder if these instructions are current, I am going to periodically test and update this post with my results. Please note I'm testing with a 6T, TMobile 6Ts are different. You can generally assume previous versions of LOS and OOS were also tested, but if you are unsure feel free to ask in this thread.
Last tested with:
OOS 10.3.7 and LOS 17.1 12-31 with TWRP 3.4.0-2
OOS 10.3.11 and LOS 18.1 05-27 with TWRP 3.5.2_9-0
This method has also been tested with:
OOS 10.3.3 and Omnirom 5-24 MicroG and Omnirom 5-24.
Cliff Notes
*TWRP 3.5.0_9-0+ Must be used with LOS 18 / 18.1
- Backup everything to the PC, so you will need to copy all your data over.
- Sync all your accounts, etc.
- In TWRP format data. Reboot recovery (This step wipes the device, make sure you backed everything up!)
- Factory Reset. (This is the slider at the bottom, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else)
- Flash Lineage
- Flash TWRP Installer
- Reboot to Recovery
- Flash Lineage (This is only the first time, to get the AOSP rom on both slots, only do this for the first install)
- Flash TWRP Installer (This is only the first time, to get the AOSP rom on both slots, only do this for the first install)
- Reboot to Recovery (This is only the first time, to get the AOSP rom on both slots, only do this for the first install)
- Flash Gapps (Optional)
- Flash Magisk (Optional) (Remember for ver 22 the Magisk.apk gets renamed to Magisk.zip, can also be renamed to uninstall.zip for uninstalling)
- Reboot to System.
- Then you should be able to setup the device, copy everything back over. Restore your data.
After this you should be able to update Lineage as normal.
- Reboot to recovery
- Flash Lineage.
- Flash TWRP Installer
- Reboot to Recovery
- Flash Gapps. (Optional, but if you flashed them once you have to keep flashing them.)
- Flash Magisk. (Optional)
- Reboot to system.
- No loss of data, or anything.
Thanks for the guide, able to flash los 17.1 successfully.
How to go back to OOS?
Does anyone have a guide on how to go back to OOS after flashing Lineage according to Lineage's instructions?
fordjonathan said:
Does anyone have a guide on how to go back to OOS after flashing Lineage according to Lineage's instructions?
Click to expand...
Click to collapse
Back up your data, use Step 1 of these instructions. That will put OOS back on your phone.
MSM Tool, always my least favorite option, but always an option.
MSM Tools for Regular 6T (TMobile uses a different one)
installed 17.1!
OhioYJ said:
Installing Lineage...
Click to expand...
Click to collapse
Massive thanks for your instructions!
- at first, I tried upgrading from LOS 16.0 to LOS 17.1. I followed the instructions on the wiki, but it landed me in the qualcomm crashdump mode.
- after that I ran into your instructions, and tried to follow your update guide, but it didn't help (not very surprising I guess, but I haven't had much to lose at this point ).
- after that, I just followed your fresh install guide (i.e. flashing the fastboot room and starting from scratch), followed every step and it worked!
I wonder if it's worth updating lineage OS wiki and pointing to your instructions? There is bunch of people in this thread, who also bricked the phone into crashdump, so perhaps it could help to prevent it for someone else.
Updating to LOS 17.1 ?
Dasseem said:
Thanks for the guide, able to flash los 17.1 successfully.
Click to expand...
Click to collapse
Initially I had problems with updating LOS, so I returned to Stock. As more people attempted to install LOS, and this fine Original Poster "Ohio" offered such excellent, and detailed instructions, I have been running LOS 16 since February.
However, I have not updated it, since I have had Zero Issues.
But to clarify, you used this method to update to LOS 17.1 ?
- coming from LOS 16 - without first returning to a fast-boot ROM ?
Did you up-date GApps accordingly during this Flash ?
Thank You, in advance, for any assistance!
:good:
barguybrady said:
But to clarify, you used this method to update to LOS 17.1 ?
- coming from LOS 16 - without first returning to a fast-boot ROM ?
Click to expand...
Click to collapse
Hi, I updated my previous reply to make it a bit more clear!
Yep, I was on LOS 16. Haven't had any issues, but figured why not update if I'll have to do it eventually
So I downloaded 17.1 and used the wiki instructions, which messed the phone up
Ended up flashing fastboot rom and starting from scratch, flashed gapps and magisk according to OhioYJ's instruction and it worked.
Flashing method
barguybrady said:
But to clarify, you used this method to update to LOS 17.1 ?
- coming from LOS 16 - without first returning to a fast-boot ROM ?
Did you up-date GApps accordingly during this Flash ?
Thank You, in advance, for any assistance!
:good:
Click to expand...
Click to collapse
I was using carbon ROM previously, had to move to OOS latest for flashing the lineage 17.1, believe it needs to be done if you are coming from pie, people know better correct me if I am wrong here.
As Karlicoss mentioned, it's better to follow the method posted by Ohio.
OhioYJ said:
Cliff Notes Versions
Installing Lineage
- Install fastboot ROM boot it once. Just to make sure everything is good.
- Reboot to fastboot.
- Boot the image of TWRP.
- Run the TWRP installer, reboot to recovery
- You backed everything up right?
- Factory reset (This is the slider at the bottom in the wipe menu).
- Format data. (This is the button that says Format data in the wipe menu)
- Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. You must do this after formatting data.
- Now transfer Lineage and TWRP to your phone, Windows / Linux should see TWRP fine as a media device when plugged in.
- Install Lineage
- Run the TWRP Installer.
- Reboot to Recovery.
- Install Lineage (You need Lineage on both slots, so yes run it again)
- Run the TWRP Installer (yes again).
- Reboot to Recovery.
- Install Gapps if you want them.
- Install Magisk if you use Magisk. Do not install modules or other add ons at this point. Boot once and go through the setup and everything, then install your add-ons.
- Be aware the phone may restart once, then Lineage will start up and all will be good.
Updating Lineage
- Reboot to recovery
- Flash Lineage.
- Flash TWRP Installer
- Reboot to Recovery
- Flash Gapps. (Assuming you use them, if you installed them once you must continue to install them or do a clean install)
- Flash Magisk. (Optional If you use it)
- Reboot to system.
- No loss of data, or anything.
- No need to flash anything twice etc.
Click to expand...
Click to collapse
Updating failed for me, as it shows everything encripted once I reboot the second time to recovery on slot B...
badpanda said:
Updating failed for me, as it shows everything encripted once I reboot the second time to recovery on slot B...
Click to expand...
Click to collapse
Usually this means you didnt format data, or you are using an old version of TWRP. Did you do a clean install?
I just tried it on my phone, was running 4-12 build, using 3.3.1-32 TWRP, updated to the 4-14 build, using 4-14 Gapps (nano), everything went smoothly here.
OhioYJ said:
Usually this means you didnt format data, or you are using an old version of TWRP. Did you do a clean install?
I just tried it on my phone, was running 4-12 build, using 3.3.1-32 TWRP, updated to the 4-14 build, using 4-14 Gapps (nano), everything went smoothly here.
Click to expand...
Click to collapse
No, no clean install. Just wanted to update to today's newest build os.
bump...
Thanks a lot for your guide. Very helpfull.
I'm using it with /e/ rom.
installing android 10 roms
I followed exactly as it was written. Same issues arose for me. After the phone is off then turned on no LTE. It makes phone calls and also text stuff. HOWEVER when you take out and reinsert sim LTE is enable. What is the problom?????????
sickpoppy said:
I followed exactly as it was written. Same issues arose for me. After the phone is off then turned on no LTE. It makes phone calls and also text stuff. HOWEVER when you take out and reinsert sim LTE is enable. What is the problom?????????
Click to expand...
Click to collapse
Just cycling airplane mode doesnt work? This isn't a TMobile 6T is it? You are in Sim slot 1? You maybe better asking in the LOS thread, and provide log it not working and then it working when you reinsert it. Im not quite sure whats going on there.
OhioYJ said:
Usually this means you didnt format data, or you are using an old version of TWRP. Did you do a clean install?
I just tried it on my phone, was running 4-12 build, using 3.3.1-32 TWRP, updated to the 4-14 build, using 4-14 Gapps (nano), everything went smoothly here.
Click to expand...
Click to collapse
So this means you do have to always format data for every single update??
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
sickpoppy said:
I followed exactly as it was written. Same issues arose for me. After the phone is off then turned on no LTE. It makes phone calls and also text stuff. HOWEVER when you take out and reinsert sim LTE is enable. What is the problom?????????
Click to expand...
Click to collapse
Change your sim card to the other slot...
---------- Post added at 09:11 PM ---------- Previous post was at 09:07 PM ----------
@OhioYJ So for an update you boot to recovery flash LOS latest version then flash twrp again and then reboot to recovery second time then format data to possibly decript encrypted system and, transfer files both gapps and magisk to device and then install gapps and magisk, lastly just reboot to system?
reply
yes it is a tmobile but it was flashed to global. TWRP is the version you are using. downloaded the lastest ROM. Weird it finds LTE at first then like I said when then phone shuts off LTE doesnt work til I take sim out.
badpanda said:
So this means you do have to always format data for every single update??
Click to expand...
Click to collapse
No that would be ridiculous. Not necessary at all. You have something else going on, but I dont know what. My update procedure is exactly as listed on the OP, on two 6Ts, two different carriers.
sickpoppy said:
yes it is a tmobile but it was flashed to global. TWRP is the version you are using. downloaded the lastest ROM. Weird it finds LTE at first then like I said when then phone shuts off LTE doesnt work til I take sim out.
Click to expand...
Click to collapse
A TMobile "converted" to global does not equal a global 6T. Logs posted in the LOS thread, may help out other TMobile users? The TMobile 6Ts introduce all sorts of quirks, and Im afraid I dont have any experience with them, so hopefully another TMobile user will be able to help.
This version of TWRP works on the Lenovo TB-X505F (wifi).
For the TB-X505X, see this thread. For the TB-X605F/L, see this thread.
For the TB-X606F/L, see this thread. The X606F/L is the second gen M10 and it uses a Mediatek SOC.
Code:
#include <std_disclaimer.h>
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Working:
AFAIK, everything is working including:
data decryption
MTP
Known issues:
time not adjusting for Daylight Saving
OTA (for a workaround see this post)
Before installing TWRP
Before you install TWRP, upgrade your tablet to the Android 9 (Pie) or Android 10 (Q) stock ROM.
This tablet shipped with Android 8 (Oreo), in which the bootloader did not allow unlocking. When you tried to unlock the bootloader, it gave this error message:
Code:
fastboot oem unlock-go
FAILED (remote: 'unknown command')
fastboot: error: Command failed
Installation
It is recommended that you also install Magisk. This will ensure TWRP remains your default recovery.
Step-by-step guide
download TWRP to your PC (see the Download section below)
download magisk.apk to your MicroSD or OTG device. Get the latest Magisk apk file here. Rename the filetype from apk to zip (for example Magisk-v22.0.zip)
if your bootloader is already unlocked, go to step 4. To unlock bootloader:
on tablet: go to Settings->System->About and press "Build number" 7 times to enable Developer Options.
on tablet: go to Settings->System->DeveloperOptions. Turn on: "OEM unlocking" and "USB debugging".
connect tablet to your computer. Tablet will ask for permission to "Allow USB debugging". Tick "always allow" and select "OK".
backup any files you want to keep to an external device (MicroSD/OTG/computer), because the next step will wipe all your photos, files, google account etc on the tablet.
Now unlock the bootloader:
Code:
adb reboot bootloader
fastboot oem unlock-go
fastboot reboot
flash the twrp image:
Code:
adb reboot bootloader
fastboot flash recovery twrp.img
if you haven't loaded Magisk yet, go to step 6. If you have already loaded Magisk, you can just reboot and you're finished:
Code:
fastboot reboot
adb reboot recovery
load Magisk (step one): reboot to recovery. Do not reboot into the system, because it will over-write TWRP with stock recovery. If that happens, go back to step 4 and start again. When you issue the reboot command (below), you have to immediately press the button combination to reboot to recovery (TWRP). Here are the steps:
issue the reboot command:
Code:
fastboot reboot
immediately press and hold all three buttons (Pwr+VolUp+VolDown). The tablet might reboot twice. Release all the buttons when you see the TWRP screen, or hear your PC acknowledge that ADB is connected.
load Magisk (step two): flash Magisk. In TWRP:
select "Install"
use "select storage" to locate device you stored magisk.zip on.
press the OK button
select the Magisk zip file
swipe to confirm Flash
when Magisk is finished, hit the "Reboot System" button
finished!
If you prefer to use button combos, rather than fastboot/ADB commands:
Vol Down + Power = fastboot mode
Vol Up + Vol Down + Power = recovery mode
Changelog
Code:
01/03/2023 - bug fix: data partition again backs up and restores correctly
20/01/2023 - add TW_EXTRA_LANGUAGES and TB_X505F_S001149_221115_ROW kernel (credit to @Tonyha7 )
30/12/2022 - add system partition to AdvancedWipe (TB_X505F_S001147_220830_ROW firmware only)
15/11/2022 - TWRP 3.7.0-0 update
- support for TB_X505F_S001147_220830_ROW
18/12/2021 - TWRP 3.6.0-0 update
- support for A12 decryption (keymaster)
27/03/2021 - TWRP 3.5.1-0 update
- change to landscape mode for tablets
01/01/2021 - TWRP 3.5.0-0: initial release
Downloads
TWRP 3.7.0-0 for X505F: twrp-X505F_11.img (for TB_X505F_S001147_220830_ROW and above)
TWRP 3.6.0-0 for X505F: twrp-X505F_11_2021.img (for earlier stock ROMs)
Source code
https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp/tree/twrp-11
https://github.com/Yahoo-Mike/recovery_device_lenovo_X505F/tree/android-11.0
Credits
The guys at TeamWin Recovery Project.
Everyone whose device trees I plagiarised from GitHub.
Contributors
Yahoo Mike
Tonyha7
Last Updated 2023-03-01 (fix /data backup/restore)
Created 2021-01-01
reserved
Thanks for useful post,
Possible to reboot into recovery from fastboot?
zubair1836 said:
Thanks for useful post,
Possible to reboot into recovery from fastboot?
Click to expand...
Click to collapse
Not that I know of. The bootloader accepts the command fastboot reboot recovery, but boots to system anyway.
Hello there, I've been looking how to install this on my slow tablet for almost like an hour. Could there be some tutorial or extended explanation to the process and installation, I'm such a noob, sorry.
This worked for me. Thank you for your effort and the TWRP!
Worked for me too - many thanks!
Can't wait for a custom ROM!
TWRP Recovery Installation Steps
1. Download android platform tools
2. Unlock developer mode on the M10
3. Enable USB debugging on the M10
3. OEM unlock enable on the M10
4. XDA download TWRP copy to sd
5. Download Magisk app (from Github!!! johnwu), change extension to .zip
6. Adb to fastboot
7. fastboot flash recovery [filename.img]
8. Turn off device
9. Turn on device holding all 3 buttons, release when see Lenovo splash screen
10. In TWRP find Magisk zip
11. Install Magisk
Stock ROM Recovery
1. Download qualcomm drivers 64 bit install
2. Download Lenovo recovery and image tool windows app from Lenovo support website
3. Fastboot oem edl
4. Turn off M10
5. Start recovery windows app, wait till instructions
6. Hold volume up (up is the side of the button closest to the front camera) and insert cable
7. Release button after windows app detects device
8. Troubleshoot by checking windows device manager for the M10 appears as a Qualcomm device
I'm thinking about getting one of these tablets, but before I do so I'd like to know that the screen lock still works after installing TWRP.
This might sound like a crazy question, but my Samsung Tab A won't set a screen lock - pattern, PIN or password - once TWRP has been installed, and I'd rather not run into the same issue again.
Heeni said:
I'm thinking about getting one of these tablets, but before I do so I'd like to know that the screen lock still works after installing TWRP.
This might sound like a crazy question, but my Samsung Tab A won't set a screen lock - pattern, PIN or password - once TWRP has been installed, and I'd rather not run into the same issue again.
Click to expand...
Click to collapse
Confirmed working normally.
zubair1836 said:
Confirmed working normally.
Click to expand...
Click to collapse
Many thanks.
Thank you! TWRP is working fine!
Stupid me flashed before I installed the Android 10 OTA, so I had to temporarily go back to stock recovery. Unfortunately beamingbadger's method didn't work for me.
This is how it worked for me:
Download the OTA via Lenovo's "Rescue And Smart Assistant"
The stock recovery image will be in the Download folder (default path: C:\ProgramData\LMSA\Download\RomFiles) called "recovery.img"
Flash the recovery.img the same way as you would with the twrp img (adb reboot bootloader -> fastboot flash recovery recovery.img)
fastboot reboot
Install OTA
Flash TWRP recovery + Magisk again (follow the steps from the first post, skip bootloader unlock)
The method I use to install OTAs is:
open Magisk App
select "Uninstall Magisk", then the "Restore Images" option
reboot to Android (you will have no root access and stock recovery is restored)
apply OTA
re-flash twrp and install Magisk
NOTE 1: if you've unencrypted your data partition, it will be re-encrypted by this process.
NOTE 2: the new Magisk App (v22) can be installed in TWRP by renaming the *.apk to *.zip. See the new install instructions.
What's involved with running gsi ROMs on this device? It's got the same SoC as my Samsung Tab, which runs them well, so I'm assuming that this tab will also, but I'd like to know if there are any traps that I need to be aware of.
I can partly answer my own question. It all went more smoothly than I expected: installing TWRP, Magisk and then LineageOS R Mod //LiR, followed by Disable_Dm-Verity_enfec.zip.
If I want to try other GSI ROMs, do I need to flash stock before trying another one? I've had some trouble doing that (won't boot) and it's possibly to do with encryption.
Heeni said:
I can partly answer my own question. It all went more smoothly than I expected: installing TWRP, Magisk and then LineageOS R Mod //LiR, followed by Disable_Dm-Verity_enfec.zip.
Click to expand...
Click to collapse
That's great news. Well done.
Heeni said:
If I want to try other GSI ROMs, do I need to flash stock before trying another one? I've had some trouble doing that (won't boot) and it's possibly to do with encryption.
Click to expand...
Click to collapse
On my X605F I do this in twrp for a new GSI install:
format (not wipe) data partition. This is the option where you have to confirm by swiping.
factory reset. This clears the caches.
restore the stock boot and vendor partitions (from a backup I made). This is because Magisk can touch these partitions.
install the GSI system image
install anything else I need like disable_Dm-Verity, Magisk, gapps etc
I don't know what LOS R Mod //LiR does to your system. If it touches any other partitions, you should restore those to stock too.
Thanks for that. It gives me something to go on with. I've downloaded the stock ROM from lolinet, so I can grab the boot and vendor images from that.
I was able to try a couple of other GSI ROMs and I've settled on AndyYan's LineageOS 17.1 for now. The only serious installation issue I had - which I can laugh about in hindsight - was thinking I'd got myself into a very bad bootloop, when all I needed to do was let go of the power button after the Lenovo logo appeared.
On this tablet, there is no navigation capability at all (no navbar, no gestures, no setting to configure them) on installation, and I have to set it using adb. I suspect it goes back to PHH basic ROMs, but I don't feel like doing yet another install and testing right at this moment. Is this happening on the other tablets that you're testing, or is it unique to this one?
I just posted the v3.5.1 update to twrp.
It's also changed to landscape mode, as many of you requested.
Quick question, how do i apply new system updates with twrp installed? Should i not bother? Also, i forgot how to block check for updates!
will this allow flashing of stock roms download from lenovo recovery? ive been stuck on an ancient android 9 version because the ota updater fails.
Hello, I have a Samsung Galaxy A6+ with latest fw installed.
(italian version)
A605FNXXU7CUD4
The phone is totally useless after the update to android 10, it takes AGES to perform any action, even open the Camera or open a Message.
Already tried to wipe everything, hard reset, reinstall fw. Still useless.
Since I’d like to downgrade to Android 9 to have back a useful phone, I tried to install the latest Android 9 fw with Odin.
A605FNXXS5BTB1
But it fails, saying SW REV CHECK FAIL : [aboot] Fused 7 > Binary 5
What can I do?
Is there any chance to downgrade this phone?
Thank you
1. Unlock your bootloader.
2. Flash custom recovery for your device.
3. Go to custom recovery (TWRP) and flash any downloaded custom rom (for your device), GSI or save stock firmware as flashable zip with tool like ClassyKitchen.
4. Flash Magisk or RMM-bypass-v3 in TWRP to protect your bootloader from getting locked again.
Backup your personal data at first, of course.
nqnxev said:
1. Unlock your bootloader.
2. Flash custom recovery for your device.
3. Go to custom recovery (TWRP) and flash any downloaded custom rom (for your device), GSI or save stock firmware as flashable zip with tool like ClassyKitchen.
4. Flash Magisk or RMM-bypass-v3 in TWRP to protect your bootloader from getting locked again.
Backup your personal data at first, of course.
Click to expand...
Click to collapse
Almost done, but I can't find any custom rom available for download. Can someone help? Since wwith twrp I cannot install a stock rom. Thanks in advance.
I managed to flash a so called Ari's rom, but I think the phone is now bricked. It is on bootloop on the first screen of Samsung (with phone name and so on) and with SET WARRANTY BIT : KERNEL at top left. I think it is time to trash it or does someone have any hint? Thanks
Ecto1000 said:
I managed to flash a so called Ari's rom, but I think the phone is now bricked. It is on bootloop on the first screen of Samsung (with phone name and so on) and with SET WARRANTY BIT : KERNEL at top left. I think it is time to trash it or does someone have any hint? Thanks
Click to expand...
Click to collapse
I proposed three different options: custom rom, GSI (generic system image) or conversion stock firmware to flashable form. If there's no good custom rom for A6+, then don't worry - you can still try another options. Try playing with Generic System Images:
1. Flash your current stock firmware as usual in Odin.
2. Unlock bootloader and flash TWRP.
3. Go to TWRP.
4. Wipe partitions cache, dalvik, data, system (don't wipe vendor partition - it's needed).
5. Flash GSI image (recommended will be at first phhusson's AOSP (Android 9 or 10)) as "system image". You always need to choose and download "arm32_binder64" variant of img file.
6. Reboot to your new system.
Second option is to convert stock Android 9 firmware into flashable form.
1. Download ClassyKitchen tool.
2. Import downloaded Android 9 stock firmware (for your phone) into it and save it as flashable zip.
3. Go to TWRP.
4. Wipe cache, dalvik, data, system and vendor.
5. Flash your previously done zip with Android 9 as any other flashable zip in TWRP.
6. Flash Magisk or RMM-state-bypass-v3 in TWRP to prevent your bootloader from getting locked again.
7. Reboot.
I went for the second option, in Classykitchen I loaded the stock android 9 rom and selected
BUILD ZIP ROM (for recovery).
Then installed with TWRP following your wipe indications.
Success.
But when I went to install RMM-state-bypass-v3 I got the error impossile to mount /system.
So I rebooted twrp and before anything I manually mounted SYSTEM in twrp in the dedicated MOUNT menu, and I did everything again from wipe to install.
Is this procedure correct?
Success, success also for RMM-state-bypass-v3.
I rebooted but I'm again stuck in the same loop described in my previous reply.
When I selecr REBOOT in twrp, do I have to flag anything? For example System?
Regarding the first option, if I go there:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
exactly which file do I have to download among ASSETS of any release?
Thank you very much
Ecto1000 said:
I went for the second option, in Classykitchen I loaded the stock android 9 rom and selected
BUILD ZIP ROM (for recovery).
Then installed with TWRP following your wipe indications.
Success.
But when I went to install RMM-state-bypass-v3 I got the error impossile to mount /system.
So I rebooted twrp and before anything I manually mounted SYSTEM in twrp in the dedicated MOUNT menu, and I did everything again from wipe to install.
Is this procedure correct?
Click to expand...
Click to collapse
Yes, it's correct. If RMM bypass or Magisk.zip was flashed without any errors in TWRP then everything is okay. Just reboot to system in TWRP after that - there is option to reboot directly to system. First boot always can take a bit longer than next boots.
Ecto1000 said:
exactly which file do I have to download among ASSETS of any release
Click to expand...
Click to collapse
You always need to get any "arm32_binder64" (always AB) image. Gapps or vanilla is just your choice. Just get Android 9 or 10 image and flash it as "system image" (but wipe at first partitions specified in my previous post - don't wipe only Vendor partition, because it contains important things). Android 12 GSI still aren't stable. Android 11 - maybe will work properly. Android 9 and 10 should work fine. There is even short article about GSI on Galaxy A6+ with some fixes for that device attached:
Samsung Galaxy A6 Plus (2018)
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
You can try of course other GSI's as well:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Thank you very much, appreciated.
But something weird happens: I install the ROM with success. If then I try to install Magisk (or Rmm) it fails with error 7.
And twrp says No Os installed if I reboot.
But if I try to install Magisk after rebooting into twrp after installing the ROM it goes without errors.
But anyway I have the issues of No Os installed.
Ecto1000 said:
Thank you very much, appreciated.
But something weird happens: I install the ROM with success. If then I try to install Magisk (or Rmm) it fails with error 7.
And twrp says No Os installed if I reboot.
But if I try to install Magisk after rebooting into twrp after installing the ROM it goes without errors.
But anyway I have the issues of No Os installed.
Click to expand...
Click to collapse
You need to reboot to recovery after flashing new system, because just after flashing TWRP doesn't recognize it - that is why you see that "no OS installed". Just reboot your phone to recovery again (you have such option in TWRP). In case of GSI (except maybe CAOS, LineageOS Q/R mod) Magisk or RMM bypass is not needed.
Btw, in case of any problems with hardware support on GSI flash also that patch in TWRP (it may be needed to mount "Vendor" partition in TWRP before flashing that fixes):
Fixes.zip
drive.google.com
Thank you again for your help.
I already rebooted to recovery and twrp keeps saying NO OS.
I'm using twrp 3.5.2_10-0.
I'm starting to suspect that this behaviour is due to the fact that this version of twrp could be too much new and unstable for my phone.
So I'd like to install an older version of twrp with Odin, as explained here:
TWRP for SM-A605FN Samsung Galaxy A6+
How to Install TWRP 3.2.3-1 on Galaxy A6+ SM-A605FN Android 8.0.0 Oreo. Once you installed TWRP recovery on your Samsung Galaxy A6+ SM-A605FN, you can customize it, Rooting or installing custom ROM
www.recovery-mode.com
But I cannot manage to go into download mode again, even from REBOOT menu of twrp it doesn't work, I keep staying in the loop explained before.
Moreover your first option of GSI need me to go into download mode to install the latest stock ROM with Odin.
I just manage to get into the attached screen.
Any idea?
Thank you again
It's not possible to ignore that message and just flash latest stock firmware via Odin? Odin refuses flashing latest stock firmware?
Other builds of TWRP for your devices you'll find here:
Releases · roynatech2544/TWRP_device_samsung_a6plte
Contribute to roynatech2544/TWRP_device_samsung_a6plte development by creating an account on GitHub.
github.com
But don't use TWRP older than 3.4.0, because it doesn't have support for "Vendor" partition.
Yes, I managed to ignore that screen and go in download mode again.
I tried to follow your first option since the second one was not successful.
Installed latest stock and then twrp 3.5.0-1.
Wipe as you explained, I flash the Gsi
system-quack-arm32_binder64-ab-gapps.img
The flash is very fast, but no errors, is it normal?
After that I reboot to recovery in order to flash
Disable_DM-Verity_ForceEncrypt_11.02.2020
it goes but just at the end it gives the error
failed to mount /odm no such file or directory.
And if I reboot to system the phone loops as always.
I'm losing all hope...
Ecto1000 said:
system-quack-arm32_binder64-ab-gapps.img
Click to expand...
Click to collapse
It's okay, but it's possible that you'll always need "vndklite" images for working camera.
Ecto1000 said:
The flash is very fast, but no errors, is it normal?
Click to expand...
Click to collapse
If you flashed it as "System Image" and it was successful then yes - should be fine. DM-Verity isn't needed for GSI - only RMM bypass v3 is sometimes needed (on CAOS, Lineage Q/R mod and maybe in case of some other images). On usual A600FN RMM bypass is not needed on phhusson AOSP. Just format "Data" partition (format, not only wipe) - it will remove encryption for you.
Procedure of flashing should be like that:
1. Wipe: cache, dalvik, data, system ("Vendor" partition leave untouched, because it's important for GSI - that is why you needed to flash stock firmware at first, because it adds vendor files for your phone, but it's needed only once, just don't wipe "Vendor").
2. Flash your GSI as "System Image".
3. Reboot phone (to recovery again).
4. Mount your "data", "vendor" and "system" partition.
5. Flash your zips: RMM bypass v3 (optionally Magisk).
5. Reboot to your new system now.
In case of any hardware support problems, reboot to TWRP again, mount "Vendor" partition and flash that fixes:
Fixes.zip
drive.google.com
Try to boot Android 10 or Android 9 images. If it will succeed, then you can try flashing Android 11 images and check what works, and what not. According to that article
nqnxev said:
It's okay, but it's possible that you'll always need "vndklite" images for working camera.
Click to expand...
Click to collapse
I don't know what are those images. Can you explain better?
When I proceed with RMM bypass V3 I see the errors in the attached image. It seems like there is a problem in writing to /system.
Can this be related to the hardware support problems you mentioned?
I tried with different versions of Twrp already and with Havoc Os too.
Should I try with flashing a different ROM ?
Thanks again
Ecto1000 said:
I don't know what are those images. Can you explain better?
Click to expand...
Click to collapse
Just look at filename of system images. But as I see, it's apparently important on Android 11 and newer. For now, try to boot Android 10 or 9. Let's try with that image:
https://github.com/phhusson/treble_experimentations/releases/download/v222/system-quack-arm32_binder64-ab-vanilla.img.xz
1. Decompress that image.
2. Copy to SD card or to internal storage.
3. Wipe cache, dalvik, data, system.
4. Format data partition (it's needed only once).
5. Flash downloaded and extracted file as "System Image".
6. Reboot phone to recovery (again).
7. Select in TWRP: Mount -> system, data, vendor.
8. Flash RMM bypass v3 (or Magisk).
9. Reboot now to system.
10. In case of some things not working, go back to TWRP and mount vendor partition (Mount -> tick "Vendor" -> go back to flashing zips) and flash that:
Fixes.zip
drive.google.com
11. Reboot to system again and check if now everything works properly.
Ecto1000 said:
When I proceed with RMM bypass V3 I see the errors in the attached image. It seems like there is a problem in writing to /system.
Click to expand...
Click to collapse
Yes, because you need to mount that partitions in TWRP:
Mount -> tick "system", "vendor" and "data" - and now flash whatever you want.
The only "receipt" which isn't giving installation errors is following your last instructions but avoiding to reboot to recovery after ROM flash (used Vanilla), and using Magisk v22 with unticked the line called "skip digest check" . See attached images.
Anyway, still no success to get into android.
Also tried fixes.zip.
Maybe I have to try with sideload ?
Ecto1000 said:
The only "receipt" which isn't giving installation errors is following your last instructions but avoiding to reboot to recovery after ROM flash (used Vanilla), and using Magisk v22 with unticked the line called "skip digest check" . See attached images.
Anyway, still no success to get into android.
Also tried fixes.zip.
Click to expand...
Click to collapse
Everything seems to be okay in your photos. What happens when you press "Reboot System"?
nqnxev said:
Everything seems to be okay in your photos. What happens when you press "Reboot System"?
Click to expand...
Click to collapse
The phone goes into loop with the attached screen and black screen alternatively.
On the top you can see SET WARRANTY BIT: KERNEL, it should be normal right?
Do I have to set something inside MOUNT of twrp before rebooting to system?
Ecto1000 said:
The phone goes into loop with the attached screen and black screen alternatively.
On the top you can see SET WARRANTY BIT: KERNEL, it should be normal right?
Do I have to set something inside MOUNT of twrp before rebooting to system?
Click to expand...
Click to collapse
I've never had such problem, but according to that thread it seems that it's a fault of modified kernel (so don't flash Magisk with GSI, because it patches kernel).
Try to flash stock firmware, unlock bootloader, flash TWRP, format "data" partition, wipe partitions (cache, dalvik, system, data) and flash GSI image as "system image". And reboot to system.
Don't flash RMM and Magisk for now - and check if system will run properly.
Hello!
So recently I was able to install LineageOS 18.1 (GSI) + GApps on my Samsung Galaxy Tab A 8 (SM-T290) tablet and wanted to share how I did it. I noticed a lack of decent step-by-step guides to modding this tablet so I figure I'd share what I learned through scouring multiple threads and through multiple headaches. Fun fact: I also got this working with LineageOS 19 (GSI), however it ran pretty poorly and Android 12 is ugly as hell so why bother anyway? ALSO interestingly enough, you'll see I wrote [SM-T290N] in the title as well. That is the model of the Kid's Edition of this phone, which happens to be the one I had. So I can confirm this process works for the Kid's Edition of this tablet as well as the original.
Some Things To Note
Below I'll list the software/firmware I used in this process. You don't necessarily need to follow this exactly but I don't see any reason not to. The end result is a working install of LineageOS with GApps so if that's what you want I would just follow along step-by-step. ALSO I'm writing this from memory so if I make a mistake please let me know and I'll try and correct it.
Click to expand...
Click to collapse
What You'll Need
Your tablet
A USB Cable to connect your tablet to your PC
A 4GB+ MicroSD card
A Windows PC
Some patience
Instructions
Preparing Your MicroSD Card
1. Place the LineageOS 18.1 .img file from this thread (On SourceForge, there is a section below the files about the naming conventions and how they relate to the hardware of your device and configuration of your ROM. I used the lineage-18.1-20220315-UNOFFICIAL-arm64_bvS-vndklite.img.xz image for my device. If your device is slightly different, you can use Treble Info to determine what ROM you should use. Just make sure to use the VNDKLITE rom if your device supports it.
2. Place the multidisabler .zip folder on there as well. This will preserve encryption provided by TWRP after rebooting.
3. Finally, place the MindTheGapps .zip folder on your SD card (make sure to get the correct version. In my case this was the 11.00-arm64 version).
4. Insert your MicroSD card into your device.
Unlocking the Bootloader
So the first thing you're gonna want to do is unlock your OEM bootloader on your Samsung device.
1. Go to Settings->About Phone->Software Information and look for a field called "Build Number". Tap this Five Times until you see a notification saying developer settings were enabled.
2. Go to Settings->Developer Settings and look for the setting labeled OEM Unlock and turn it on.
If you don't see this setting try connecting to wifi, changing your date and time to around two months prior (I set mine to back to May 2021 since the firmware I was using was set in July 2021), then go back to your developer settings and switch them off and back on again. You should now see the OEM Unlock option.
Click to expand...
Click to collapse
3. From here, you can reboot your device into Recovery Mode by holding the Vol+ and Vol- buttons when the device begins to boot again.
4. You should see a blue screen with some options. Press the Vol+ button to enter Download Mode. This is where you'll use Odin to flash the firmware you need as well as TWRP.
Flashing Firmware
So when I attempted this process I used Magendanz's Unofficial TWRP 3.6.0 as it is the only version of TWRP I found for this device. I also used Odin v3.14.1_3B Patched from this XDA thread. Magendanz's TWRP requires you to have the T290XXU3CUG4 Firmware (I used the XAR region) in order to flash TWRP to your device (you can check wether or not you already have this firmware on your phone by looking the About Phone section again). It takes a while to download though make sure you have some time.
1. Download Odin and run the program. Unzip your firmware folder and use the relevant files when selecting the BL, AP, CP, CSC fields in Odin. I didn't use the HOME_CSC just leave it blank.
2. Connect your device via USB and Flash this firmware to your device.
3. Once your device restarts, go through the setup process and then repeat the Unlocking the Bootloader instructions above in order to make sure it is unlocked again.
4. Reboot your device the same way as stated above.
Flashing TWRP
Before starting, be aware that after you flash TWRP to your device, your device will restart and attempt to open the stock system again. You're going to want to hold the Power and Vol+ buttons simultaneously. You will likely get a warning screen saying that the bootloader is unlocked and may ask you to do a factory reset, this (I believe) is fine. The key here is that once you press the Power Button to continue (as instructed on the warning screen) you'll want to immediately press and hold the Power and Vol+ keys for around 6 Seconds before letting go again (you should be seeing the Samsung Galaxy Tab A logo screen). After letting go, wait around 3-4 seconds, if nothing changes, restart the device by holding all three buttons (Power, Vol+,Vol-) and attempt the process again. It's a pain in the ass but you'll get it eventually. Just make sure not to let the device boot into the system again as that can cause problems in TWRP and you'll likely have to start the process over (from flashing the firmware).
1. Once your tablet is once again in Download Mode, open Odin again and flash the TWRP (tar.md5 file) to the AP (recovery) partition. Do not use any of the other partitions.
2. If this is successful, your phone will begin to reboot. Quickly press and hold the combination of buttons Power and Vol+ until you see the warning dialog pop up. Once you do, release all buttons and be ready to quickly press and release the Power button continue, and then immediately after press and hold the Power and Vol+ buttons again for 6 seconds. After around 6 seconds, release all buttons. Wait around 3-4 seconds and, if the screen does not change to the TWRP logo, restart the device by pressing and holding all buttons simultaneously and try this step again.
3. If you have entered into TWRP, congrats!
Installing Custom ROM + Software in TWRP
1. The first thing you'll want to do is select the Wipe->Format Data. Type 'yes' and hit enter (or swipe I forget which).
2. Next, select Install, and then select your MicroSD card as your storage device. You should see your zip files (if not switch from the install image option).
3. Install the multidisabler, do not reboot
4. Go back into Install and select Install Image (might not be the exact naming) option. Select your MicroSD card as the storage device again and install the LineageOS 18.1 rom. Do not reboot.
5. Go back into Install and select your MindTheGapps zip file and install it.
Now, a lot of people run into a problem when trying to install Gapps which is your device complaining about no more available space in the system partition. If this is the case, go back to Wipe and select Advanced Wipe. Select your system partition and then select Change or Repair Partition. Once you're here you should see the size and available space of your partition. You'll want to hit Resize Partition and let it do it's thing. To confirm it worked, go back to Wipe->Advanced Wipe->Select System->Change or Repair Partition and your available space should be much larger now. Now just attempt to install MindTheGapps again.
Click to expand...
Click to collapse
Final Steps
Once you reboot you should be able to successfully reach the setup screen for Lineage. Go through the steps of setting up your device as usual and be sure that Gapps are installed. Go ahead and re-enable developer settings and enable USB-Debugging and Root Debugging. The reason for this is that, when I first installed Gapps, Google Play Protect would keep throwing warnings at me about my device not being Google Play Certified. This means I couldn't actually use any of the google play services. If you run into the same issue, here are the steps you can take to fix it:
1. First, go into Settings->Apps and find your Google Play Services app. Clear the cache and delete the app data, then reboot your device. If you try and sign into the Google Play store and you are able to without getting any play protect warnings, then you're good you can disregard the following steps.
2. If you are still receiving these warnings, you'll want to head over to this site and follow the instructions (I'm not gonna tell you how to use ADB here). Once you submit your framework ID, reboot your device. Everything should be working fine now.
And that's it! If I am forgetting any steps please let me know, again I am writing this from memory of the process so it may be missing some minor details. I hope this helps!!!
How's the stability, speed and the responsiveness on Lineage with a t290? I have mine rooted debloated and twrp installed but it is slow on stock OS
kkdamion said:
How's the stability, speed and the responsiveness on Lineage with a t290? I have mine rooted debloated and twrp installed but it is slow on stock OS
Click to expand...
Click to collapse
It runs surprisingly well! Much better than stock. There’s virtually no input lag and the battery life is also very solid on lineage.
Where i run into some lag is when trying to use apps that have embedded video in them. For whatever reason the T290 cannot handle video very well at all.
So yeah I would definitely recommend trying it, it’ll really breathe new life into that tablet
i cant get google play services to work and i cant fetch device_id to register the device
i get "no closing qoute" message
adb shell 'sqlite3 /data/data/com.google.android.gsf/databases/gservices.db \
/system/bin/sh: no closing quote
EDIT: downloaded "android device id" APK from the internet and gathered the framework id information from the app
kkdamion said:
i cant get google play services to work and i cant fetch device_id to register the device
i get "no closing qoute" message
adb shell 'sqlite3 /data/data/com.google.android.gsf/databases/gservices.db \
/system/bin/sh: no closing quote
EDIT: downloaded "android device id" APK from the internet and gathered the framework id information from the app
Click to expand...
Click to collapse
Glad it worked out for you! Let me know if you have any more questions and I'd be happy to help.
Hi! is this applicable also for SM-T295?
for those trying to figure out the Google Play Certified page with the adb command
Code:
adb shell 'sqlite3 /data/data/com.google.android.gsf/databases/gservices.db \
"select * from main where name = \"android_id\";"'
do : adb shell
first then paste in :
sqlite3 /data/data/com.google.android.gsf/databases/gservices.db \
"select * from main where name = \"android_id\";"
and it shouldn't give you the error
i must say. linageos on my sm-t290 is really nice
its fast and smooth way much better then stock fw
i would reccomend anyone with a t290/t295 to install this GSI
Im into a bootloop right now after a few fails with installing Lineage on my SM-T290..
Seems like i cant install any rom? not sure how to fix this issue, can anyone point me in the right direction?
Im able to get into TWRP and download mode. but cant install any rom?
thepalek1ng said:
Hello!
So recently I was able to install LineageOS 18.1 (GSI) + GApps on my Samsung Galaxy Tab A 8 (SM-T290) tablet and wanted to share how I did it. I noticed a lack of decent step-by-step guides to modding this tablet so I figure I'd share what I learned through scouring multiple threads and through multiple headaches. Fun fact: I also got this working with LineageOS 19 (GSI), however it ran pretty poorly and Android 12 is ugly as hell so why bother anyway? ALSO interestingly enough, you'll see I wrote [SM-T290N] in the title as well. That is the model of the Kid's Edition of this phone, which happens to be the one I had. So I can confirm this process works for the Kid's Edition of this tablet as well as the original.
What You'll Need
Your tablet
A USB Cable to connect your tablet to your PC
A 4GB+ MicroSD card
A Windows PC
Some patience
Instructions
Preparing Your MicroSD Card
1. Place the LineageOS 18.1 .img file from this thread (On SourceForge, there is a section below the files about the naming conventions and how they relate to the hardware of your device and configuration of your ROM. I used the lineage-18.1-20220315-UNOFFICIAL-arm64_bvS-vndklite.img.xz image for my device. If your device is slightly different, you can use Treble Info to determine what ROM you should use. Just make sure to use the VNDKLITE rom if your device supports it.
2. Place the multidisabler .zip folder on there as well. This will preserve encryption provided by TWRP after rebooting.
3. Finally, place the MindTheGapps .zip folder on your SD card (make sure to get the correct version. In my case this was the 11.00-arm64 version).
4. Insert your MicroSD card into your device.
Unlocking the Bootloader
So the first thing you're gonna want to do is unlock your OEM bootloader on your Samsung device.
1. Go to Settings->About Phone->Software Information and look for a field called "Build Number". Tap this Five Times until you see a notification saying developer settings were enabled.
2. Go to Settings->Developer Settings and look for the setting labeled OEM Unlock and turn it on.
3. From here, you can reboot your device into Recovery Mode by holding the Vol+ and Vol- buttons when the device begins to boot again.
4. You should see a blue screen with some options. Press the Vol+ button to enter Download Mode. This is where you'll use Odin to flash the firmware you need as well as TWRP.
Flashing Firmware
So when I attempted this process I used Magendanz's Unofficial TWRP 3.6.0 as it is the only version of TWRP I found for this device. I also used Odin v3.14.1_3B Patched from this XDA thread. Magendanz's TWRP requires you to have the T290XXU3CUG4 Firmware (I used the XAR region) in order to flash TWRP to your device (you can check wether or not you already have this firmware on your phone by looking the About Phone section again). It takes a while to download though make sure you have some time.
1. Download Odin and run the program. Unzip your firmware folder and use the relevant files when selecting the BL, AP, CP, CSC fields in Odin. I didn't use the HOME_CSC just leave it blank.
2. Connect your device via USB and Flash this firmware to your device.
3. Once your device restarts, go through the setup process and then repeat the Unlocking the Bootloader instructions above in order to make sure it is unlocked again.
4. Reboot your device the same way as stated above.
Flashing TWRP
Before starting, be aware that after you flash TWRP to your device, your device will restart and attempt to open the stock system again. You're going to want to hold the Power and Vol+ buttons simultaneously. You will likely get a warning screen saying that the bootloader is unlocked and may ask you to do a factory reset, this (I believe) is fine. The key here is that once you press the Power Button to continue (as instructed on the warning screen) you'll want to immediately press and hold the Power and Vol+ keys for around 6 Seconds before letting go again (you should be seeing the Samsung Galaxy Tab A logo screen). After letting go, wait around 3-4 seconds, if nothing changes, restart the device by holding all three buttons (Power, Vol+,Vol-) and attempt the process again. It's a pain in the ass but you'll get it eventually. Just make sure not to let the device boot into the system again as that can cause problems in TWRP and you'll likely have to start the process over (from flashing the firmware).
1. Once your tablet is once again in Download Mode, open Odin again and flash the TWRP (tar.md5 file) to the AP (recovery) partition. Do not use any of the other partitions.
2. If this is successful, your phone will begin to reboot. Quickly press and hold the combination of buttons Power and Vol+ until you see the warning dialog pop up. Once you do, release all buttons and be ready to quickly press and release the Power button continue, and then immediately after press and hold the Power and Vol+ buttons again for 6 seconds. After around 6 seconds, release all buttons. Wait around 3-4 seconds and, if the screen does not change to the TWRP logo, restart the device by pressing and holding all buttons simultaneously and try this step again.
3. If you have entered into TWRP, congrats!
Installing Custom ROM + Software in TWRP
1. The first thing you'll want to do is select the Wipe->Format Data. Type 'yes' and hit enter (or swipe I forget which).
2. Next, select Install, and then select your MicroSD card as your storage device. You should see your zip files (if not switch from the install image option).
3. Install the multidisabler, do not reboot
4. Go back into Install and select Install Image (might not be the exact naming) option. Select your MicroSD card as the storage device again and install the LineageOS 18.1 rom. Do not reboot.
5. Go back into Install and select your MindTheGapps zip file and install it.
Final Steps
Once you reboot you should be able to successfully reach the setup screen for Lineage. Go through the steps of setting up your device as usual and be sure that Gapps are installed. Go ahead and re-enable developer settings and enable USB-Debugging and Root Debugging. The reason for this is that, when I first installed Gapps, Google Play Protect would keep throwing warnings at me about my device not being Google Play Certified. This means I couldn't actually use any of the google play services. If you run into the same issue, here are the steps you can take to fix it:
1. First, go into Settings->Apps and find your Google Play Services app. Clear the cache and delete the app data, then reboot your device. If you try and sign into the Google Play store and you are able to without getting any play protect warnings, then you're good you can disregard the following steps.
2. If you are still receiving these warnings, you'll want to head over to this site and follow the instructions (I'm not gonna tell you how to use ADB here). Once you submit your framework ID, reboot your device. Everything should be working fine now.
And that's it! If I am forgetting any steps please let me know, again I am writing this from memory of the process so it may be missing some minor details. I hope this helps!!!
Click to expand...
Click to collapse
bro, I have a problem, my tablet is in a bootloop and I don't know what to do, try with other custom roms but it's the same, what do I have to do so that when I install a custom room it doesn't give me that error?
Flashing the Gapps package resulted in an error: Failure to mount '/system_root' (Invalid argument)
V0latyle said:
Flashing the Gapps package resulted in an error: Failure to mount '/system_root' (Invalid argument)
Click to expand...
Click to collapse
Sorry for the bother, new to Android modding scene.
I went into the recovery menu (oem unlock on) and tried to flash TWRP as written on this guide, but I get a secure check fail : aboot on my device and fail on Odin. What do I do here?
Edit: Aparently my device is SM-T295, basically the LTE version of the same device, which is why it isn't recognising it. My bad.
Do you have any video to teach better ???
HyruleanKnight said:
Sorry for the bother, new to Android modding scene.
I went into the recovery menu (oem unlock on) and tried to flash TWRP as written on this guide, but I get a secure check fail : aboot on my device and fail on Odin. What do I do here?
Edit: Aparently my device is SM-T295, basically the LTE version of the same device, which is why it isn't recognising it. My bad.
Click to expand...
Click to collapse
Shouldn't matter, TWRP is the same for both variants.
There's two ways to get around the secure check fail problem:
After updating via Odin, make sure you immediately interrupt the boot and force reboot into Download Mode. Then, flash TWRP.
Or, after updating, allow your device to boot to Android, skip through the setup wizard (make sure you connect to the internet), and enable Developer Options. Ensure OEM Unlocking is there and grayed out. If not, leave it for a bit until it is. This disables Vaultkeeper on the bootloader. Then, reboot to download mode and flash TWRP.
In both cases, after flashing TWRP, DO NOT let the device boot into Android. Force boot into recovery, then install the Multidisabler from here.
Now to my own problem...
I don't know what I did differently (or wrong) but I cannot get LineageOS to boot correctly on my T290. I was running 18.1 before. I recently updated to CVG3 and followed the same process as I did before - flashed TWRP, then installed the LineageOS GSI to /system.
18.1 continuously bootloops without even loading LineageOS.
19.1 gets to the LineageOS splash screen, and occasionally the setup screen, but continuously reboots also.
After flashing TWRP, I'm installing the multidisabler, then wiping /system, /data, /cache.
Any idea what I'm doing wrong?
@J.Michael any thoughts? You're more familiar with Samsung than I am
V0latyle said:
Shouldn't matter, TWRP is the same for both variants.
There's two ways to get around the secure check fail problem:
After updating via Odin, make sure you immediately interrupt the boot and force reboot into Download Mode. Then, flash TWRP.
Or, after updating, allow your device to boot to Android, skip through the setup wizard (make sure you connect to the internet), and enable Developer Options. Ensure OEM Unlocking is there and grayed out. If not, leave it for a bit until it is. This disables Vaultkeeper on the bootloader. Then, reboot to download mode and flash TWRP.
In both cases, after flashing TWRP, DO NOT let the device boot into Android. Force boot into recovery, then install the Multidisabler from here.
Now to my own problem...
I don't know what I did differently (or wrong) but I cannot get LineageOS to boot correctly on my T290. I was running 18.1 before. I recently updated to CVG3 and followed the same process as I did before - flashed TWRP, then installed the LineageOS GSI to /system.
18.1 continuously bootloops without even loading LineageOS.
19.1 gets to the LineageOS splash screen, and occasionally the setup screen, but continuously reboots also.
After flashing TWRP, I'm installing the multidisabler, then wiping /system, /data, /cache.
Any idea what I'm doing wrong?
@J.Michael any thoughts? You're more familiar with Samsung than I am
Click to expand...
Click to collapse
I think I have a solution.
I see that you are installing the multidisabler after you booted TWRP and by wiping the partitions, however, what you are supposed to do is this:
After you have booted into TWRP and have swiped to allow modifications, go to Wipe> Format Data and type yes. Don't reboot, and don't wipe any other partitions.
After that, go to install and then install the multidisabler, don't reboot.
Then install the latest LineageOS gsi to the system partition, and finally install gapps, then reboot.
Make sure you are choosing the arm64_bvS_vndklite variant, otherwise it will bootloop.
Hope this helps!
Just Mike said:
I think I have a solution.
I see that you are installing the multidisabler after you booted TWRP and by wiping the partitions, however, what you are supposed to do is this:
After you have booted into TWRP and have swiped to allow modifications, go to Wipe> Format Data and type yes. Don't reboot, and don't wipe any other partitions.
After that, go to install and then install the multidisabler, don't reboot.
Then install the latest LineageOS gsi to the system partition, and finally install gapps, then reboot.
Make sure you are choosing the arm64_bvS_vndklite variant, otherwise it will bootloop.
Hope this helps!
Click to expand...
Click to collapse
Okay, so install Multidisabler AFTER wiping data. I'll try that.
I'm using the bgS image so it's already got Google apps. I didn't have any success flashing any of the Gapps packages on the vanilla images.
Is Multidisabler still necessary on Android 11 on this device, or do we just need a patched vbmeta.img?
V0latyle said:
Okay, so install Multidisabler AFTER wiping data. I'll try that.
I'm using the bgS image so it's already got Google apps. I didn't have any success flashing any of the Gapps packages on the vanilla images.
Is Multidisabler still necessary on Android 11 on this device, or do we just need a patched vbmeta.img?
Click to expand...
Click to collapse
Yes, Multidisabler is necessary, otherwise it'll bootloop. I haven't tried anything with a patched vbmeta and frankly don't want to.
The bgS version will work just fine for Android 11.
Currently running Android 13 with LineageOS 20.0, the bvS version. Gotta say it works great. MindtheGapps 13 will work, I haven't encountered any "This device is not certified" issues.
Just Mike said:
Yes, Multidisabler is necessary, otherwise it'll bootloop. I haven't tried anything with a patched vbmeta and frankly don't want to.
The bgS version will work just fine for Android 11.
Currently running Android 13 with LineageOS 20.0, the bvS version. Gotta say it works great. MindtheGapps 13 will work, I haven't encountered any "This device is not certified" issues.
Click to expand...
Click to collapse
Do I need to wipe /system or /boot or anything before installing? I did exactly as you said - rebooted to recovery (was running Samsung stock), formatted data, installed multidisabler, then installed a LineageOS 19 image to /system. It begins to boot (LineageOS animation) then reboots.
Are you using Andy Yan's builds?
V0latyle said:
Do I need to wipe /system or /boot or anything before installing? I did exactly as you said - rebooted to recovery (was running Samsung stock), formatted data, installed multidisabler, then installed a LineageOS 19 image to /system. It begins to boot (LineageOS animation) then reboots.
Are you using Andy Yan's builds?
Click to expand...
Click to collapse
Nope, you don't have to wipe any other partitions, only format data
Yes, I'm using Andy Yan's builds. I'll link the thread here: https://forum.xda-developers.com/t/gsi-13-lineageos-20-trebledroid-based.4517345/
If I may ask, which type GSI from Andy Yan did you use?
Just Mike said:
Nope, you don't have to wipe any other partitions, only format data
Yes, I'm using Andy Yan's builds. I'll link the thread here: https://forum.xda-developers.com/t/gsi-13-lineageos-20-trebledroid-based.4517345/
If I may ask, which type GSI from Andy Yan did you use?
Click to expand...
Click to collapse
Trying to get back into TWRP, just a sec...
-arm64_bgS.img
Flashing the vndklite one now to see if it works
If I can get this working, I plan on using a bgN flavor so I can just install Magisk, since I don't use SuperSU
Edit: vndklite is bootlooping too