Hello I have a Mi A2 with ONE.
I tried to install Mi6X following this guide:
Guide
I got to step 9:
9- Click Refresh on Mi Flash Then choose Clean all and click flash
Then I got this error:
Error oem edl miflash tool, ACK count don't match
Then I tryed instead to install Jasmine again, and I started getting this error:
Cannot receive hello packet,MiFlash is trying to reset status
And then I was stupid enough to unplug my phone
THE ACTUAL PROBLEM (rigth now)
1. My phone will start, then stay at Mi(mi.com) logo indefinitely.
2. I can't enter download mode, Vol + and power will bring me the Mi logo again and again.
3. Can enter Fastboot mode... BUT...
-Mi flash don't detect it
-miflash_unlock don't detect it
-edl.cmd, unlock auto, and unlock critical say "< waiting for device >"
Edit: I solved the problem using test point to enter EDL mode, then It connected and I could flash it.
our phones (mia2) are weird devices to be honest, mine was recently bricked after choosing the "reboot to bootloader" option in twrp. id recommend you to go to mi service center if your phone is still in warranty
Stoopid Dickhead said:
our phones (mia2) are weird devices to be honest, mine was recently bricked after choosing the "reboot to bootloader" option in twrp. id recommend you to go to mi service center if your phone is still in warranty
Click to expand...
Click to collapse
Thanks for the reply. But unfortunately I can't
That would be my first solution, but my Mi A2 is not in warranty anymore...
have you tried to install stock rom with fastboot?
Maharram said:
have you tried to install stock rom with fastboot?
Click to expand...
Click to collapse
Miflash won't detect the phone, it's like is not connected at all...
puerco-potter said:
Miflash won't detect the phone, it's like is not connected at all...
Click to expand...
Click to collapse
No im not talking about miflash im saying fastboot u can install stock rom with fastboot too you need payload bin dumper and ota flasher for that
Maharram said:
No im not talking about miflash im saying fastboot u can install stock rom with fastboot too you need payload bin dumper and ota flasher for that
Click to expand...
Click to collapse
Sorry, can you help me unsderstand a little.
I found this guide:
Guide
But none of my Roms (Jasmine or Wayne) have a file that's named payload.bin
I feel like I am missing something
Edit:
I found that ota updates are the ones with the payload.bin file followed the guide and everything, but fastboot bring almost the same error that EDL brings:
< Waiting for any device >
Can it be that my cable somehow magically from one conection to another stoped working or something? I asked a friend for his cable... Cs are not as common in this country yet.
puerco-potter said:
Sorry, can you help me unsderstand a little.
I found this guide:
Guide
But none of my Roms (Jasmine or Wayne) have a file that's named payload.bin
I feel like I am missing something
Edit:
I found that ota updates are the ones with the payload.bin file followed the guide and everything, but fastboot bring almost the same error that EDL brings:
< Waiting for any device >
Can it be that my cable somehow magically from one conection to another stoped working or something? I asked a friend for his cable... Cs are not as common in this country yet.
Click to expand...
Click to collapse
Have you enabled oem unlock ?
puerco-potter said:
Hello I have a Mi A2 with ONE.
I tried to install Mi6X following this guide:
Guide
I got to step 9:
9- Click Refresh on Mi Flash Then choose Clean all and click flash
Then I got this error:
Error oem edl miflash tool, ACK count don't match
Then I tryed instead to install Jasmine again, and I started getting this error:
Cannot receive hello packet,MiFlash is trying to reset status
And then I was stupid enough to unplug my phone
THE ACTUAL PROBLEM (rigth now)
1. My phone will start, then stay at Mi(mi.com) logo indefinitely.
2. I can't enter download mode, Vol + and power will bring me the Mi logo again and again.
3. Can enter Fastboot mode... BUT...
-Mi flash don't detect it
-miflash_unlock don't detect it
-edl.cmd, unlock auto, and unlock critical say "< waiting for device >"
Please help, I am really afraid my phone will die permanetly as I can't turn it off and I don't know if it will charge in it's current state.
Click to expand...
Click to collapse
Did you flash hex kernel? You know that phone on 6x miui rom will not boot if you havent flash custom kernel after miui?
Mi flash tool won't work with locked bootloader
Install adb drivers and write command
' abd oem edl '
If ur phones connects
Than u can use mi flash tool
Maharram said:
Have you enabled oem unlock ?
Click to expand...
Click to collapse
I followed this guide to unlock bootloader previous to the guide on flashing of the first post:
GUIDE
The .bat that you run there actually executes "fastboot oem unlock". I did that part without any problem, the phone screen asked for confirmation and everything fine. After succefully unlocking bootloader I followed the guide on flashing Miui 10.
Now even that "fastboot oem unlock" will show this message:
< waiting for any device >
Amnvlad said:
Mi flash tool won't work with locked bootloader
Install adb drivers and write command
' abd oem edl '
If ur phones connects
Than u can use mi flash tool
Click to expand...
Click to collapse
"adb oem edl" brings this error:
adb.exe: unknown command oem
"fastboot oem edl" brings this error:
< waiting for any device >
and
"adb reboot bootloader" brings this error:
error: no devices/emulators found
(tested everything with the phone in fastboot or the Mi logo)
mariosenta said:
Did you flash hex kernel? You know that phone on 6x miui rom will not boot if you havent flash custom kernel after miui?
Click to expand...
Click to collapse
I didn't, because I got an error when flashing Miui, never got to follow the rest of the guide because my phone won't be recognised by any program it seems...
Thanks you all for the help, I will try with another cable, and if that don't work I will test point this little one. I really don't want to open it... but It seems like fastboot won't connect no matter what...
puerco-potter said:
I followed this guide to unlock bootloader previous to the guide on flashing of the first post:
GUIDE
The .bat that you run there actually executes "fastboot oem unlock". I did that part without any problem, the phone screen asked for confirmation and everything fine. After succefully unlocking bootloader I followed the guide on flashing Miui 10.
Now even that "fastboot oem unlock" will show this message:
< waiting for any device >
Click to expand...
Click to collapse
Did you execute this line "fastboot flashing unlock_critical" after fastboot oem unlock?
mariosenta said:
Did you execute this line "fastboot flashing unlock_critical" after fastboot oem unlock?
Click to expand...
Click to collapse
Originally yes, after oem unlock, I ran flashing unlock_critical
puerco-potter said:
I followed this guide to unlock bootloader previous to the guide on flashing of the first post:
GUIDE
The .bat that you run there actually executes "fastboot oem unlock". I did that part without any problem, the phone screen asked for confirmation and everything fine. After succefully unlocking bootloader I followed the guide on flashing Miui 10.
Now even that "fastboot oem unlock" will show this message:
< waiting for any device >
Click to expand...
Click to collapse
You installed oreo on pie? Because Mi A2 has antiroll back projection if you downgrade your Android version then you lost your imei code
Maharram said:
You installed oreo on pie? Because Mi A2 has antiroll back projection if you downgrade your Android version then you lost your imei code
Click to expand...
Click to collapse
6x has antiroll back, a2 does not.
---------- Post added at 11:13 AM ---------- Previous post was at 11:12 AM ----------
[/COLOR]
puerco-potter said:
I didn't, because I got an error when flashing Miui, never got to follow the rest of the guide because my phone won't be recognised by any program it seems...
Thanks you all for the help, I will try with another cable, and if that don't work I will test point this little one. I really don't want to open it... but It seems like fastboot won't connect no matter what...
Click to expand...
Click to collapse
Please, keep us updated.
I had the same issues like you months ago. The only solution you buy a pentalobe 0.8mm for iphone, a small philips screw driver, and a tweezer. Flash your phone in EDL mode. You need to contact 2 pins. You can search the location of the pins, how to disassemble the phone by googling it. then just flash Mi A2 stock ROM first, then convert it to Mi 6X again. I
hasel17 said:
I had the same issues like you months ago. The only solution you buy a pentalobe 0.8mm for iphone, a small philips screw driver, and a tweezer. Flash your phone in EDL mode. You need to contact 2 pins. You can search the location of the pins, how to disassemble the phone by googling it. then just flash Mi A2 stock ROM first, then convert it to Mi 6X again. I
Click to expand...
Click to collapse
No need to convert, now we have miui for a2.
mariosenta said:
No need to convert, now we have miui for a2.
Click to expand...
Click to collapse
Where can I take a look at this? I am really interested.
The cable wasn't the issue, I am getting the tools to open it tonight.
Related
Hi everyone,
everything is in the title, yesterday I bricked my Mix when I tried to install a new version via recovery (Mi Pc suite chinese version).
It updated, started working (I entered the rom) then restarted because it asked for a reset, had to say yes, when it restarted I was in a bootloop of Xiaomi logo and couldn't go into recovery mode anymore.
Only fastboot works, but still can't install rom via because I didn't unlocked the bootloader yet and didn't check for usb debugging.
Any ideas would be really appreciated.
Regards
zakenz said:
Hi everyone,
everything is in the title, yesterday I bricked my Mix when I tried to install a new version via recovery (Mi Pc suite chinese version).
It updated, started working (I entered the rom) then restarted because it asked for a reset, had to say yes, when it restarted I was in a bootloop of Xiaomi logo and couldn't go into recovery mode anymore.
Only fastboot works, but still can't install rom via because I didn't unlocked the bootloader yet and didn't check for usb debugging.
Any ideas would be really appreciated.
Regards
Click to expand...
Click to collapse
So you still be able to flash official with miflash?
When I try to flash via Mi flash it says critical partition error thing (probably because I still don't have unlock the bootloader)
zakenz said:
When I try to flash via Mi flash it says critical partition error thing (probably because I still don't have unlock the bootloader)
Click to expand...
Click to collapse
Shouldn't need unlock to install genuine ROM from xiaomi with miflash, you are using the fastboot ROM right?
Likewise USB debugging shouldn't be necessary, as far as I know. Like if you have no ROM it wouldn't know anything about USB debugging.
Yes I'm using fastboot rom
On this page: http://en.miui.com/a-234.html You can see Mi Mix is listed as it needs to unlock before any flash with fastboot.
When I try flash with MiFlash, it says Flash xbl error : https://i.imgur.com/ct0xAQY.png
zakenz said:
Yes I'm using fastboot rom
On this page: http://en.miui.com/a-234.html You can see Mi Mix is listed as it needs to unlock before any flash with fastboot.
When I try flash with MiFlash, it says Flash xbl error : https://i.imgur.com/ct0xAQY.png
Click to expand...
Click to collapse
You have unpacked the file correctly?
Think they mean if you're not using miflash.
http://xiaomitips.com/guide/how-to-flash-miui-fastboot-rom-on-mi-max-with-locked-bootloader/
Don't know if it would work on mix
Yes I did, with all the bat files the images folder.
I'll try one more time when I get home.
Or wait some days to get the unlock permissions by xiaomi
zakenz said:
Yes I did, with all the bat files the images folder.
I'll try one more time when I get home.
Or wait some days to get the unlock permissions by xiaomi
Click to expand...
Click to collapse
Might be safer to just wait. If you do it now you will have to do it again in a day.
I tried to unlock again with no success, it says error because I didn't enable the "OEM Unlock" option..
Any suggestions?
zakenz said:
I tried to unlock again with no success, it says error because I didn't enable the "OEM Unlock" option..
Any suggestions?
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=4Q4MopLMprE
EDL not working on Mix models.. I already tried and it bootloops again
zakenz said:
EDL not working on Mix models.. I already tried and it bootloops again
Click to expand...
Click to collapse
Yea no edl mode but thought maybe that might work
---------- Post added at 06:30 PM ---------- Previous post was at 06:29 PM ----------
james1089 said:
Yea no edl mode but thought maybe that might work
Click to expand...
Click to collapse
Just never heard of anyone been bricked when fastboot is available. Didn't read it just something to check
https://www.technobuzz.net/use-mi-pc-suite-to-flash-fastboot-rom-on-bricked-xiaomi-phones/
I'm kinda ****ed.. gotta replace it
james1089 said:
Just never heard of anyone been bricked when fastboot is available.
Click to expand...
Click to collapse
Because of bootloader not unlocked and usb debugging disabled. Thanks for help though
james1089 said:
Just never heard of anyone been bricked when fastboot is available. Didn't read it just something to check
https://www.technobuzz.net/use-mi-pc-suite-to-flash-fastboot-rom-on-bricked-xiaomi-phones/
Click to expand...
Click to collapse
I tried without success
Do you know why can't I get in recovery mode anymore ?
zakenz said:
Do you know why can't I get in recovery mode anymore ?
Click to expand...
Click to collapse
Have you tried reinstalling the recovery,
From command prompt or from the same command prompt , reboot recovery. Any of these useful?
https://www.google.co.uk/amp/s/www....0-basic-terminal-commands-you-should-know?amp
I'm sure you have disabled driver signature on Windows but just checking.
james1089 said:
Have you tried reinstalling the recovery,
From command prompt or from the same command prompt , reboot recovery. Any of these useful?
https://www.google.co.uk/amp/s/www....0-basic-terminal-commands-you-should-know?amp
Click to expand...
Click to collapse
These are all adb commands and since I don't have usb debugging enabled :/
And yes signature disabled
zakenz said:
These are all adb commands and since I don't have usb debugging enabled :/
And yes signature disabled
Click to expand...
Click to collapse
Last option is "deep flash cable" to go into edl mode, buy 1 or make 1
Hello all!
I recently bought a second hand Xiaomi MI A2 online however I found a problem.
The previous owner did a factory reset on it but I'm stuck in the initial set up configuration because it asks me for the google account credentials attached to the phone. I texted the previous owner but had no answer.
So I tried to flash the official ROM to bypass the issue but I get an error message from Xiaomi Flash Tool saying "remote: Flash is not allowed in Lock State".
I think this is happening for one of the following reasons:
The previous owner didn't enable USB Debugging (thing I can't do because I'm stuck in the set up configuration)
The bootloader is locked (and I can't unlock it because I don't have the credentials of the attached account)
Does anyone knows how can I solve this problem?
Thank you for your attention
Joaosacramento said:
Hello all!
I recently bought a second hand Xiaomi MI A2 online however I found a problem.
The previous owner did a factory reset on it but I'm stuck in the initial set up configuration because it asks me for the google account credentials attached to the phone. I texted the previous owner but had no answer.
So I tried to flash the official ROM to bypass the issue but I get an error message from Xiaomi Flash Tool saying "remote: Flash is not allowed in Lock State".
I think this is happening for one of the following reasons:
The previous owner didn't enable USB Debugging (thing I can't do because I'm stuck in the set up configuration)
The bootloader is locked (and I can't unlock it because I don't have the credentials of the attached account)
Does anyone knows how can I solve this problem?
Thank you for your attention
Click to expand...
Click to collapse
Maybe you can see/ask in this thread for mia2 toolkit (I'm not sure but you can ask there )
https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585
daitalos said:
Maybe you can see/ask in this thread for mia2 toolkit (I'm not sure but you can ask there )
https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585
Click to expand...
Click to collapse
Thank you, will give it a try!
EDIT: Not working, every time I try to execute the unlock I got an error message "remote: Flashing Unlock is not allowed"
Joaosacramento said:
Thank you, will give it a try!
EDIT: Not working, every time I try to execute the unlock I got an error message "remote: Flashing Unlock is not allowed"
Click to expand...
Click to collapse
(yes...normally, first you must enable "OEM unlocking" from developer option
_ https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-unlock-bootloader-xiaomi-t3831484
__but first for your problem with locked device, see here for FRP apk : https://www.google.gr/search?q=com.....69i57j0l5.14869j0j8&sourceid=chrome&ie=UTF-8
__and here frp mia2 : https://www.google.gr/search?q=frp+.....69i57j0l3.7035j0j8&sourceid=chrome&ie=UTF-8
first "unlock" your device & then you can unlock bootloader easy ....
sry for english
Just unlock bootloader(critical too) and use miflash
I also have a Mi A2 stuck in android logo screen can't can't boot into device developer options to unlock bootloader.
Fastboot oem unlock give me error flashing is not allowed.
Is there anyway around this?
You need to do an unlock of critical partitions - "fastboot flashing unlock_critical"
daitalos said:
(yes...normally, first you must enable "OEM unlocking" from developer option
_ https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-unlock-bootloader-xiaomi-t3831484
__but first for your problem with locked device, see here for FRP apk : https://www.google.gr/search?q=com.....69i57j0l5.14869j0j8&sourceid=chrome&ie=UTF-8
__and here frp mia2 : https://www.google.gr/search?q=frp+.....69i57j0l3.7035j0j8&sourceid=chrome&ie=UTF-8
first "unlock" your device & then you can unlock bootloader easy ....
sry for english
Click to expand...
Click to collapse
Hey! It worked, thank you very much!
Face_11 said:
I also have a Mi A2 stuck in android logo screen can't can't boot into device developer options to unlock bootloader.
Fastboot oem unlock give me error flashing is not allowed.
Is there anyway around this?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585
(or flash stock rom via mi flash tool/ fastboot files) : http://en.miui.com/download-353.html
follow / read fastboot quide : http://en.miui.com/a-234.html
daitalos said:
https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585
(or flash stock rom via mi flash tool/ fastboot files) : http://en.miui.com/download-353.html
follow / read fastboot quide : http://en.miui.com/a-234.html
Click to expand...
Click to collapse
Thanks. I've tried the MIFlash Tool and I get Error Flashing Not allowed in Lock State. I've also tried the MI A2 ToolKit and get the same message. Basically anything I try and do states device is locked or unable to run in Lock State.
Boot Loader is currently locked and I cannot access developer mode to enable OEM unlocking. Question I have is :
- Can I use EDL Cable to work around this or do EDL cables not longer work with Newer Xiaomi phones?
- If EDL cable doesn't work, is the tespoint method my only option.
thanks in advance
Face_11 said:
Thanks. I've tried the MIFlash Tool and I get Error Flashing Not allowed in Lock State. I've also tried the MI A2 ToolKit and get the same message. Basically anything I try and do states device is locked or unable to run in Lock State.
Boot Loader is currently locked and I cannot access developer mode to enable OEM unlocking. Question I have is :
- Can I use EDL Cable to work around this or do EDL cables not longer work with Newer Xiaomi phones?
- If EDL cable doesn't work, is the tespoint method my only option.
thanks in advance
Click to expand...
Click to collapse
yes it's difficult .... I understand
edl maybe work, but I'm not sure...maybe if you go to a repair shop is a better solution
(see & here : https://forum.xda-developers.com/mi-a2/help/edl-deep-flash-cable-t3828732 )
https://youtu.be/n_7RVmW2Rvs
https://forum.xda-developers.com/showpost.php?p=77327325&postcount=2
Gl
Face_11 said:
Thanks. I've tried the MIFlash Tool and I get Error Flashing Not allowed in Lock State. I've also tried the MI A2 ToolKit and get the same message. Basically anything I try and do states device is locked or unable to run in Lock State.
Boot Loader is currently locked and I cannot access developer mode to enable OEM unlocking. Question I have is :
- Can I use EDL Cable to work around this or do EDL cables not longer work with Newer Xiaomi phones?
- If EDL cable doesn't work, is the tespoint method my only option.
thanks in advance
Click to expand...
Click to collapse
I would try a wipe from the recovery but if that doesnt work then just test point the phone. It isnt that hard, I had to do it myself today because of a soft brick. You just need a T3 screwdriver really. Take out the 2 bottom screws. Take a razor and slide it under the corner of the display and lift it enough the get a credit card in there. Then just work around and you should be able to get the screen off. Take the small metal plate off just above the battery and disconnect the battery and the connector on the right. There will be the test points, short them out, connect the phone to the pc(you can stop shorting out the points when it gets detected) and you have like 10-15secs to start flashing the phone in miflash(obviously you need to have the drivers already set up).
I have same problem with xiaomi mi a2 which had bootloop. Was not able to start device at all so no oem unloco no developer options and no usb debug. It was possible only adb sideload and fastboot. Adb sideload did nothing. I was trying to flash with adb sideload but it stops at 47% with message 1.00 x. Did try several roms with same results. Then i tried fastboot options. Falied to unlock not allowed. Itsl was impossible to get even into phone to activate developer options so i can activate oem unlock and the rest. I tried edl mode which did flash but then i got error message in bootloader it failed to mount system etc. Then i tried mi x6 rom to convert phone to another which doesnt have usual recovery mode but a stripped oem recovery mode. Now when u go back to mi a2 rom its bricked so there is no option of adb at all now. I tried to use mi x6 mi assistant option but app wont recognize usb connection it shows try normal mode then switch. When activating mi assistant on phone it does recognize rom version from recovefy flash in mi assistant app but when it downloads update rom version it cant continue. With pixel you can do anything with adb and it is so easy but xiaomi sucks big time. You cant do anything. Fastboot flashing unlock critical and fastboot oem unlock gets error failed. Flashing not allowed. U tried diferent cables but no luck. So now what? Thats why i hate adb. On samsung odin you can do impossible possible. Even with sp tools on mtk. Even boxes works flawlessly but xiaomi system is just thr worse. It doesnt matter if you get soemthing lost there is always a solution to other phones.
After having device sit as a paper weight for a few months, i broke down and ordered a phone repair kit. Opened device up and flashed via test point method. Worked Flawless. Time to enable OEM unlock so i don't have to open it up again. Thanks to community for all the help.
Use cmd
- go to fastboot then "fastboot oem unlock"
- go to fastboot again "fastboot flashing unlock_critical"
Flash with mi flash
Done
Just stumbled upon this and while may be 18 months too late, here's the step by step process to flash ROM on MI A2 that's giving error "Flash is not allowed in Lock State":
1) switch off device
2) enter fastbood mode (press hold power+vol down few seconds)
3) connect device with laptop
4) install and open adb folder on laptop (https://forum.xda-developers.com/showthread.php?t=2588979)
5) within adb folder -- shift + right click = open powershell here
6) fastboot flashing unlock_critical
7) step #6 may be pointless if phone is bricked but do it anyway
8) fastboot oem edl
9) find and download latest stock rom for your device (FASTBOOT version). It'll be .tgz file
10) extract the image folder from within (would be the same name as .tgz file)
11) open miflash (coudln't find link but look it up, it's easy)
12 select the image folder you extracted in step #10
13) click refresh. device name appear means it's recognized
14) from bottom of mi flash tool select whatever you want. I do "clean all"
15) flash (top right mi flash tool)
Face_11 said:
Thanks. I've tried the MIFlash Tool and I get Error Flashing Not allowed in Lock State. I've also tried the MI A2 ToolKit and get the same message. Basically anything I try and do states device is locked or unable to run in Lock State.
Boot Loader is currently locked and I cannot access developer mode to enable OEM unlocking. Question I have is :
- Can I use EDL Cable to work around this or do EDL cables not longer work with Newer Xiaomi phones?
- If EDL cable doesn't work, is the tespoint method my only option.
thanks in advance
Click to expand...
Click to collapse
Flashing is not allowed in lock state
i got a error recently in my mi a2 no software is installed but locked.
when i try to flash from mi flash tool it says flashing is not allowed in lock state
when i try to unlock in cmd flashing is not allowed in lock state
is there any one to fix this
IamUmesh said:
i got a error recently in my mi a2 no software is installed but locked.
when i try to flash from mi flash tool it says flashing is not allowed in lock state
when i try to unlock in cmd flashing is not allowed in lock state
is there any one to fix this
Click to expand...
Click to collapse
you need to open phone with screwdriver & do the test point ..search for video on YouTube...then EDL deepflash state you can use miflash to put back OFFICIAL only rom to device.
Hay soo i wanted to relock bootloader after failing to install custom recovery (both) i turned off oem unlocking in developer options and did fastboot oem lock. Now the phone is looping in "your device can't be checked for corruption. Please lock the bootloader" and it reboots and says the same again.
When i try to unlock the bootloader with fastboot oem unlock i get "FAILED (remote: Flashing Unlock is not allowed)
I really dont know what to do and i need a phone for comunication. Please help!
You should only lock the bootloader after installing the stock ROM, otherwise your device will be bricked and the only way you'll get it back working is by flashing the EDL test points near the phone's battery and reflashing the stock ROM back in EDL mode.
Try downloading this tool then try to unlock oem, flashing and flashing critical.
Yepi69 said:
You should only lock the bootloader after installing the stock ROM, otherwise your device will be bricked and the only way you'll get it back working is by flashing the EDL test points near the phone's battery and reflashing the stock ROM back in EDL mode.
Try downloading this tool then try to unlock oem, flashing and flashing critical.
Click to expand...
Click to collapse
Noted. Thanks!
I really messed up here. The problem is i toggled allow oem unlocking off and to top it all off i did oem lock. Now its bootlooped (check the video). Does xiaomi fix this by warrenty? I really dont want to open the device up because i am afraid i will do more demage and void the warrenty and the device wont ever be fixed.
NotCat_ said:
Noted. Thanks!
I really messed up here. The problem is i toggled allow oem unlocking off and to top it all off i did oem lock. Now its bootlooped (check the video). Does xiaomi fix this by warrenty? I really dont want to open the device up because i am afraid i will do more demage and void the warrenty and the device wont ever be fixed.
Click to expand...
Click to collapse
I have seen another guy who did this. How is this possible that you turn off the unlock bootloader option when you've already unlocked it? The option gets greyed out and becomes non-functional.
Anyways I guess the best option is to give your phone to Xiaomi for the fix.
Njaiker said:
I have seen another guy who did this. How is this possible that you turn off the unlock bootloader option when you've already unlocked it? The option gets greyed out and becomes non-functional.
Anyways I guess the best option is to give your phone to Xiaomi for the fix.
Click to expand...
Click to collapse
It wasn't grayed out for me. I'm thinking of test pointing the device because i dont really want to wait few months until i get my phone back from service. (There is no xiaomi service in my Country)
But i'm afraid if i open the device i will void my warrenty for future.
NotCat_ said:
It wasn't grayed out for me. I'm thinking of test pointing the device because i dont really want to wait few months until i get my phone back from service. (There is no xiaomi service in my Country)
But i'm afraid if i open the device i will void my warrenty for future.
Click to expand...
Click to collapse
I don't think you will since you don't need to disassemble the device, all you need to do is remove the aluminum back cover carefully with damaging it and you'll find the test points right besides the battery
Yepi69 said:
I don't think you will since you don't need to disassemble the device, all you need to do is remove the aluminum back cover carefully with damaging it and you'll find the test points right besides the battery
Click to expand...
Click to collapse
will try to do that. all tho i think screen goes off first thanks for your help and sparking some hope into me and my phone <3
It finally booted up! After having some hard time shorting test points i finally did and it booted up just fine! Big thanks to @Yepi69
use custom rom
NotCat_ said:
Hay soo i wanted to relock bootloader after failing to install custom recovery (both) i turned off oem unlocking in developer options and did fastboot oem lock. Now the phone is looping in "your device can't be checked for corruption. Please lock the bootloader" and it reboots and says the same again.
When i try to unlock the bootloader with fastboot oem unlock i get "FAILED (remote: Flashing Unlock is not allowed)
I really dont know what to do and i need a phone for comunication. Please help!
Click to expand...
Click to collapse
since your device is already unlocked i recommend you using havoc os need instructions? instagram hsghumaan01
honey ghumaan01 said:
since your device is already unlocked i recommend you using havoc os need instructions? instagram hsghumaan01
Click to expand...
Click to collapse
Yes i do want to flash that rom, but i can't get twrp to boot on my unit. When i do fastboot boot "recovery name".img it says everything went fine, but i get black screen and thus can't get it to work nor install.
try other slot
NotCat_ said:
Yes i do want to flash that rom, but i can't get twrp to boot on my unit. When i do fastboot boot "recovery name".img it says everything went fine, but i get black screen and thus can't get it to work nor install.
Click to expand...
Click to collapse
try on both slots
honey ghumaan01 said:
try on both slots
Click to expand...
Click to collapse
Whats the fastboot command to change slots?
Mtp works fine tho.
NotCat_ said:
Whats the fastboot command to change slots?
Mtp works fine tho.
Click to expand...
Click to collapse
fastboot set-active {a or b}
To see what slot you current is on,
fastboot getvar current-slot
the command to chang slot with fastboot is
NotCat_ said:
Whats the fastboot command to change slots?
Mtp works fine tho.
Click to expand...
Click to collapse
fastboot set_active a/b
---------- Post added at 12:44 PM ---------- Previous post was at 12:41 PM ----------
NotCat_ said:
Whats the fastboot command to change slots?
Mtp works fine tho.
Click to expand...
Click to collapse
fastboot set_active a/b not sure can be fastboot set-actve a/b , you should use pitch black recovery instead of simple twrp
---------- Post added at 12:45 PM ---------- Previous post was at 12:44 PM ----------
honey ghumaan01 said:
try on both slots
Click to expand...
Click to collapse
dm me on instagram hsghumaan01
honey ghumaan01 said:
fastboot set_active a/b
Click to expand...
Click to collapse
That command doesn't seem to work on my pc :/ cmd just gives out all commands when i type
fastboot set_active B (on pc)
And nothing happens :/
Are there any particular adb/fastboot files i need to download?
MarcusMario0605 said:
fastboot set-active {a or b}
To see what slot you current is on,
fastboot getvar current-slot
Click to expand...
Click to collapse
Took a screenshot of your comment for later, thanks!
Are there any particular adb/fastboot files i need to download?[/QUOTE]
use this tool; https://mega.nz/#!cr4SUIqY!Rzlftk2OFun8XIkNQb2aXRtP7-t3f4DB92vMIl90pgw
(this tool,can disable driver signature,Install all drivers,qcom,etc)
https://forum.xda-developers.com/showthread.php?t=2588979
Download SDK Platform-Tools for Windows ; https://developer.android.com/studio/releases/platform-tools
QDLoader HS-USB Driver ; https://mega.nz/#!EqJwTIzB!KJF3CldYq_u7KylaL0iO6rs05RWs2_dcUfaENjJcDpU
fastboot edl (useful) ; https://mega.nz/#!x6BkXY5A!hx8SXoBwd4-fW1UkZ1poHc7p-MFDaQ85FYH7Yk8bLZ8
See and here how to use adb & fastboot from any directory on pc ; https://www.xda-developers.com/adb-fastboot-any-directory-windows-linux/
all of these are useful tools,that you must to have on pc
sry for english
don't use ''oem unlock'' on this device ...
try these commands : fastboot flashing unlock / fastboot flashing unlock_critical
__Test points-edl A2 see here : https://en.miui.com/thread-3524265-1-1.html (edl mode do not need unlocked bootloader)
daitalos said:
don't use ''oem unlock'' on this device ...
try these commands : fastboot flashing unlock / fastboot flashing unlock_critical
__Test points-edl A2 see here : https://en.miui.com/thread-3524265-1-1.html (edl mode do not need unlocked bootloader)
Click to expand...
Click to collapse
I already flashed the phone with edl test points. I'm running havoc os +hex
daitalos said:
don't use ''oem unlock'' on this device ...
try these commands : fastboot flashing unlock / fastboot flashing unlock_critical
__Test points-edl A2 see here : https://en.miui.com/thread-3524265-1-1.html (edl mode do not need unlocked bootloader)
Click to expand...
Click to collapse
Why not use oem unlock?
Hello,
Recently, while updating PixelExperience ROM, I got my device bricked and while trying to resurrect the device through good ol' 'MiFlash' method rendered my screen like this 'press any key to shutdown' and strangest thing of all, when I power on my device, it doesn't show the unlocked logo anymore but when I run the code 'fastboot oem unlock', it shows that it's already unlocked. It would be greatly appreciated that if I get any solution.
skd_kaizer said:
Hello,
Recently, while updating PixelExperience ROM, I got my device bricked and while trying to resurrect the device through good ol' 'MiFlash' method rendered my screen like this 'press any key to shutdown' and strangest thing of all, when I power on my device, it doesn't show the unlocked logo anymore but when I run the code 'fastboot oem unlock', it shows that it's already unlocked. It would be greatly appreciated that if I get any solution.
Click to expand...
Click to collapse
You can try flashing the phone through EDL, that always does the trick for me. Just follow the guide to convert the phone but instead of converting just use the same ROM. (Jasmine system img for Jasmine and Wayne system img for Wayne.)
TehSyvar said:
You can try flashing the phone through EDL, that always does the trick for me. Just follow the guide to convert the phone but instead of converting just use the same ROM. (Jasmine system img for Jasmine and Wayne system img for Wayne.)
Click to expand...
Click to collapse
And to do that, I have to open up my phone, right?
Use a USB 2.0 port and latest platform-tools
skd_kaizer said:
And to do that, I have to open up my phone, right?
Click to expand...
Click to collapse
You have to boot to bootloader in order to boot to EDL. You don't need any special cables like other xiaomi devices.
Typing "fastboot OEM EDL" in cmd should do it. The main reason I mentioned the guides is because of the QFIL program and modded fastboot commands that are in the convert.zip . You need that modded fastboot command to boot to EDL.
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
I cant go to service center as my device is out of warranty
in google there is a pc program than can unlock bootloader of mediatek devices, search for it
Bro i cant access the bootloader, so unlocking it doesnt make any difference
I want to restore the bootloader.
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
Okay so first of all download "mtk client"
Than open the mtk client
It will give you instructions on how to connect your phone, take back of everything except system(super),vendor and userdata. Tap on flash tab there you'll notice a option called unblock bootloader tap on it and your bootloader will be unlocked
Bro Will this restore my bootloader or only unlock it because if it only unlocks then your help wont work.
Manmeet_2008 said:
Bro Will this restore my bootloader or only unlock it because if it only unlocks then your help wont work.
Click to expand...
Click to collapse
you dummy, you need to unlock the bootloader in orden to restore it installing the firmware with miflashtool or mtk client .
Ok bro thanks for your help
tutibreaker said:
you dummy, you need to unlock the bootloader in orden to restore it installing the firmware with miflashtool or mtk client .
Click to expand...
Click to collapse
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
try some sp flashtool that come with miflashtool , turn off phone and press volume- and plug the cable in , some type of mtk download mode
Ok bro i will try tomorrow
Hello everyone, today i used the tool but when i went through the tool i saw a 'erase flash' option in mtk universal tab. Can anyone please tell that what this option is used for and ticking it will lead to any sort of issues?
Manmeet_2008 said:
Hello everyone, today i used the tool but when i went through the tool i saw a 'erase flash' option in mtk universal tab. Can anyone please tell that what this option is used for and ticking it will lead to any sort of issues?
Click to expand...
Click to collapse
dont use it, will erase all the device data and partitions turning it into a useless brick, dude, in youtube there a lots of tutos to how restore original firmware go check them first
tutibreaker said:
dont use it, will erase all the device data and partitions turning it into a useless brick, dude, in youtube there a lots of tutos to how restore original firmware go check them first
Click to expand...
Click to collapse
Ok bro thanks for telling, will not use it for flashing
Did it work is it debricked?
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
You need to sSee this video,
Make sure Disconnect your phone battery then start flash
hookkrox said:
You need to sSee this video,
Make sure Disconnect your phone battery then start flash
Click to expand...
Click to collapse
You need to see the PM I've sent to you. You will find it here.
Start from BROM mode - that is always available. Then you can use mtktool to restore everything. I have an article about it on my blog, but I am not supposed to post it here... find it in my profile, or send me a PM for help.