Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
[I]#include <std_disclaimer.h>
/*
* Your warranty is not void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/[/I]
Note: Please be aware that you cannot install this without a kernel with LZMA compression support, I believe most ROMs have included my commit for this so you should be good for all custom ROMs and kernels. If not please file a request to the maintainer.
In addition, please be aware that TWRP is currently not compatible with Android 10. If you would like to use TWRP you will need to go back to Android 9. If you would like more information you can read at the link here.
Not a huge problem, stock users can just temporarily boot TWRP if you have access to a PC.
Not compatible with Android Q.
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. Use ADB or MTP to transfer the zip onto your device.
Go to install and browse to the zip and install the zip. The zip will install TWRP to both boot slots. Installing TWRP at this time will remove root if you are currently rooted.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
Changelog:
[BETA]
3.3.1-0: Initial release for Pixel 3A XL devices
3.3.1-1: Fixed having to manually change slots before rebooting.
3.3.1-2: Updated to July blobs!
3.3.1-3: Can now install TWRP to boot image. ADB, MTP, LOGD, Repack Tools and Logcat have all been removed to save the necessary space for this to work. You can grab stuff while in the OS, then flash it in TWRP (Keep in mind I have only tested this on stock as of now, feel free to test it on whatever ROM you use. It should work, but let me know if it doesn't).
3.3.1-4: Changed back to LZMA compression, also added back all the features besides ADB/Logcat. As long as your kernel supports LZMA you will be able to take advantage of installing it permanently without having to worry about space restrictions.
3.3.1-5:
Add persist entry to fstab
* To allow TWRP to store a backup settings file on /persist
and also to be used as QCOM time fix source during early boot.
Revert "Don't include logcat."
Revert "Don't include repack tools."
3.3.1-6:
Revert "Revert "Don't include repack tools.""
Add haptics firmware.
* This obviously on it's own isn't enough to get haptics working for the 3A in TWRP, but its a start.
Don't include a precompiled update_engine_sideload
* This should fix the issue of flashing officials for StatiXOS
[STABLE]
3.3.1-0: Initial official release!
Download:
https://twrp.me/google/googlepixel3axl.html
XDA:DevDB Information
TWRP, Tool/Utility for the Google Pixel 3a XL
Contributors
ZVNexus, janjan
Source Code: https://github.com/TeamWin/android_device_google_bonito
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-07-17
Current Beta Version: 3.3.1-6
Beta Release Date: 2019-06-27
Created 2019-06-27
Last Updated 2019-11-15
Reserved
Awesome! Thank you so much!
So as of this moment, there is only the ability to boot to twrp via fastboot?
DriveEuro said:
Awesome! Thank you so much!
So as of this moment, there is only the ability to boot to twrp via fastboot?
Click to expand...
Click to collapse
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.
So does anyone know if TWRP + Magisk work on Android Q for root?
ZVNexus said:
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.
Click to expand...
Click to collapse
I don't mind, I haven't flashed TWRP to a device since Treble came out, but it's easy enough to boot an image, so at least for my usage case, this is all I need
otg mounting problem
ZVNexus said:
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.
Click to expand...
Click to collapse
no you shouldn't have waited!! thanks a lot specially from all of us checking if twrp came out every day!
hey maybe you can give me a tip since i have a problem mounting otg:
when i boot twrp image if i go to backup/select storage i find a storage/usb partition (0MB)
when i connect otg (and go to mount) it becomes storage/usbotg 1 (12000MB)
but the problem is that if i click it doesn’t remain selected, and the log reports “Unable to find partition for the path ‘/storage’ ”
if i go to mount or backup/select storage and click usbotg 1 storage it doesn’t remain selected and the log reports “E: unable to locate partition for ‘/storage/usbotg-1’ ”
(i’ve tried also with different keys but i don't think it's the point anyway the 1st was an 256GB usb/SD and the 2nd a 16GB usbkey but logs reports same error)
any tip?
I'm on Q DP4. Anyone having luck flashing Magisk (canary)? In B slot it fails to mount system and vendor. I change to A slot. It completes. I reboot on A slot, I get stuck at Google starting logo and the phone never boots. If I attempt to boot B slot afterwards, it boots up fine, but I obviously don't have Magisk installed, verified with the Magisk APP.
Anyone have a clue?
Just to provide feedback.
Fastboot booted the image, it prompted for my pin, mounted system, and was able to backup properly, moved backup to computer.
Wiped the phone, reboot and went through setup, everything was working.
Back to twrp, adb pushed the backup to the phone, restored the backup and everything was functioning.
Also tested and was able to sideload flash Magisk.
So everything seems to be working as intended.
Thank you so much for your hard work!
My TWRP is NOT prompting for pin/pattern. That has to be part of this...
Wiped data via google recovery. The phone booted to Pie (i had previously did the OTA from Pie to Q beta 4). So now I'm back on Pie somehow (without reflashing). I booted to TWRP, installed Magisk successfully.
So overall, I'm not sure if this was related to Q beta 4 OTA occupying B slot while Pie still was on A slot.
Thanks to all for their work with TWRP!
Antonyo13 said:
Just to provide feedback.
Fastboot booted the image, it prompted for my pin, mounted system, and was able to backup properly, moved backup to computer.
Wiped the phone, reboot and went through setup, everything was working.
Back to twrp, adb pushed the backup to the phone, restored the backup and everything was functioning.
Also tested and was able to sideload flash Magisk.
So everything seems to be working as intended.
Thank you so much for your hard work!
Click to expand...
Click to collapse
On previous devices I have run into TWRP restore issues if I had a security PIN set on the device when I backed up. During your test did you have a PIN setup on the phone?
artiemon said:
On previous devices I have run into TWRP restore issues if I had a security PIN set on the device when I backed up. During your test did you have a PIN setup on the phone?
Click to expand...
Click to collapse
I had a pattern, not sure if it makes a difference between pattern and pin.
I will say the only thing weird i noticed was when i wiped the phone (the default wipe from twrp, not a full format of data from twrp), when i booted I was prompted for my pattern on first unlock before the device setup. Even though it was wiped.
But restoring was perfectly fine.
Antonyo13 said:
I will say the only thing weird i noticed was when i wiped the phone (the default wipe from twrp, not a full format of data from twrp), when i booted I was prompted for my pattern on first unlock before the device setup. Even though it was wiped.
But restoring was perfectly fine.
Click to expand...
Click to collapse
That is normal on pixels. If you factory reset in TWRP your password still stays
spaceman860 said:
That is normal on pixels. If you factory reset in TWRP your password still stays
Click to expand...
Click to collapse
Thank then everything is working great. No issues at all with TWRP
So just confirming - I am , I assume encrypted , as I have a PIN and a pattern with DU ROM. Can i safely backup the existing ROM and flash another and then be able to restore if need be using this version of TWRP?
jcrompton said:
So just confirming - I am , I assume encrypted , as I have a PIN and a pattern with DU ROM. Can i safely backup the existing ROM and flash another and then be able to restore if need be using this version of TWRP?
Click to expand...
Click to collapse
Yes. This is how it has worked in the past. Don't see why it wouldn't work like this currently. If you flash a different vendor image or system image, you'll want to revert back before you restore your old ROM backup.
DriveEuro said:
Yes. This is how it has worked in the past. Don't see why it wouldn't work like this currently. If you flash a different vendor image or system image, you'll want to revert back before you restore your old ROM backup.
Click to expand...
Click to collapse
Revert back to what? Sorry I don't understand?
Flash back the original vendor and system images.
GQJ said:
Revert back to what? Sorry I don't understand?
Click to expand...
Click to collapse
He was answering my question about hypothetical referring back to a prior rom from a backup
neshipda said:
no you shouldn't have waited!! thanks a lot specially from all of us checking if twrp came out every day!
hey maybe you can give me a tip since i have a problem mounting otg:
when i boot twrp image if i go to backup/select storage i find a storage/usb partition (0MB)
when i connect otg (and go to mount) it becomes storage/usbotg 1 (12000MB)
but the problem is that if i click it doesn’t remain selected, and the log reports “Unable to find partition for the path ‘/storage’ ”
if i go to mount or backup/select storage and click usbotg 1 storage it doesn’t remain selected and the log reports “E: unable to locate partition for ‘/storage/usbotg-1’ ”
(i’ve tried also with different keys but i don't think it's the point anyway the 1st was an 256GB usb/SD and the 2nd a 16GB usbkey but logs reports same error)
any tip?
Click to expand...
Click to collapse
I didn't test OTG before I uploaded, didn't have an OTG cable, but now that I know its a problem I'll look into it.
Related
This is UNOFFICIAL TWRP for the Pixel C. That said, the TeamWin team greatly helped me in getting this working. But at the same time, neither TeamWin nor me take any responsibility whatsoever for any undesired outcome resulting from any kind of use of this project and project files! If you don't exactly know what you're doing then just walk away and do something good. Don't touch any options of which you don't exactly know what they're for!
What works:
* So far, everything; encryption support should work, but some feedback on this would be welcome
Problems:
* The GUI will be sometimes slow, sometimes super slow. This is probably due to the high screen resolution of the Pixel C.
How to install:
- Unlock bootloader
- In the bootloader, run "fastboot flash recovery <.img file>"
- Reboot into Pixel C bootloader
- Boot into recovery (or later on/from Android through "adb reboot recovery")
If the recovery doesn't stick after booting into Android:
- Do the install procedure as above
- Do NOT reboot into Android
- Press Vol-Down + Power until you see the bootloader menu
- Select "Boot into Android Recovery"
- When in TWRP, mount system
- Using TWRP's File Manager, or using adb, delete the file "/system/bin/install-recovery.sh"
- Reboot
After doing this, OTAs won't work any longer, but they wouldn't work anyway after installing TWRP. Just so you know
DOWNLOAD
twrp-3.0.0-0-dragon-ryu-02-11-2016-1.img
SHA1 hash: 3e97aae6cc18975683eda2bd3732faaecec14166
Changelog
:: 01-19-2016-1
- Removed screen timeout by default, since the GUI is very slow and the screen unlock slider is very hard to use
- Added an option to fix the Fastboot Full Cap flag directly from TWRP; you find the option in "Advanced". If the Pixel C should ever not let you flash in fastboot, boot into TWRP, select Advanced -> Fix Fastboot, swipe to confirm, and you're set.
:: 02-11-2016-1
- Rebased on twrp/android-6.0 branch (i.e. upgraded to TWRP 3.0.0-0)
The recovery is based on the Pixel C stock kernel.
Awesome! I can survive without root for the time being but being able to enable multiwindow would be amazing!
Thanks!
Edit: I am getting a FAILED (remote: unsupported command) error and cant flash this. Anyone know a work around?
Worked fine for me with "fastboot flash recovery [image name]" did you unlock your bootloader? Also root works just fine, you just have to boot from your PC.
Sent from my Pixel C using Tapatalk
brando56894 said:
Worked fine for me with "fastboot flash recovery [image name]" did you unlock your bootloader? Also root works just fine, you just have to boot from your PC.
Sent from my Pixel C using Tapatalk
Click to expand...
Click to collapse
I did unlock my bootloader but can't get anywhere. Tried updating my sdk, drivers everything. I guess I will have to keep playing with it.
Edit: I relocked my bootloader, and then unlocked it again and now it is working. If anyone else runs into this give it a try.
it successfully installed on my pixel c. is reachable as the Android Recovery option. and boots to bootloader to allow boot of boot.img
this is a good thing. thanks to all involved.
it's been 1 month since release and good way to celebrate.
Good work. Thanks you
hooray thanks! just to clarify: I need encryption disabled to use twrp or just to flash SuperSU?
I'm currently using phhusson's noverity boot-img to boot and with a modified vendor img root is working fine while encryption is enabled ... just having to boot via fastboot every time is a bit awkward. And since I don't know what happens if the device got stuck and reboots itselfe without the modfied boot it would be awesome to have at least a nandroid backup
doumer said:
hooray thanks! just to clarify: I need encryption disabled to use twrp or just to flash SuperSU?
I'm currently using phhusson's noverity boot-img to boot and with a modified vendor img root is working fine while encryption is enabled ... just having to boot via fastboot every time is a bit awkward. And since I don't know what happens if the device got stuck and reboots itselfe without the modfied boot it would be awesome to have at least a nandroid backup
Click to expand...
Click to collapse
Hey... You can use TWRP even with encryption enabled, you just can't write anything to /data.
However for the next build I'm going to enable TWRP's decryption option and see if it works with the Pixel C. If it does I'll post a new build this evening (European Time).
I tried the systemless SuperSU on a decrypted /data partition but it wouldn't work (bootloop), clearly there's a lot of ground to cover here, but like I said maybe the decryption functionality will help us here.
EDIT: I'm also working on a boot.img with disabled forced encryption. Looks like we're going to get proper root very soon.
cheep5k8 said:
This is UNOFFICIAL TWRP for the Pixel C. That said, the TeamWin team greatly helped me in getting this working. But at the same time, neither TeamWin nor me take any responsibility whatsoever for any undesired outcome resulting from any kind of use of this project and project files! If you don't exactly know what you're doing then just walk away and do something good. Don't touch any options of which you don't exactly know what they're for!
What works:
* Well, basically everything IN TWRP works, it's just that without a kernel that disables forced encryption this is not of very much use. I tried flashing SuperSU, but it wouldn't work properly.
Problems:
* The GUI will be sometimes slow, sometimes super slow. This is apparently still a problem with how TWRP uses the graphics mode that is used on the Pixel C. Best is if you immediately disable the screen lock once you boot into TWRP because the unlock slider is abysmally sluggish.
How to install:
- Unlock bootloader
- In the bootloader, run "fastboot flash recovery <.img file>"
- Reboot into Pixel C coreboot bootloader
- Boot into recovery (or later on/from Android through "adb reboot recovery")
DOWNLOAD
2.8.7.0-01082016-1
Click to expand...
Click to collapse
Hello thank you for this. Yesterday I tried to build as well twrp but it wasn't fully working.
I just imported this config with TW_INCLUDE_L_CRYPTO := true && TW_INCLUDE_CRYPTO := true
I didnt copy paste the twrp.fstab I added but added its path to BOAR_smthing.
Also I used omnirom's android-6.0 revision with dragon's device tree.
The recovery seems to boot, as
Code:
adb devices
returns XXXXXx recovery.
Also I can reach the device's shell with adb shell. Just the screen stays black.
I was wondering if I missed something. Is your device tree available online ?
Khaon said:
Hello thank you for this. Yesterday I tried to build as well twrp but it wasn't fully working.
I just imported this config with TW_INCLUDE_L_CRYPTO := true && TW_INCLUDE_CRYPTO := true
I didnt copy paste the twrp.fstab I added but added its path to BOAR_smthing.
Also I used omnirom's android-6.0 revision with dragon's device tree.
The recovery seems to boot, as
Code:
adb devices
returns XXXXXx recovery.
Also I can reach the device's shell with adb shell. Just the screen stays black.
I was wondering if I missed something. Is your device tree available online ?
Click to expand...
Click to collapse
Not yet. I'm going to upload it later on to the TWRP devs for official inclusion.
You need to merge the minui patch so TWRP can use DRM for video on the Pixel C; there is no fb0 device.
there were some new boot images out today. i flashed one of them. when i boot to recovery the sdcard is not able to be mounted. do you have any suggestions on what i need to do or look at in order to get it fixed?
dkryder said:
there were some new boot images out today. i flashed one of them. when i boot to recovery the sdcard is not able to be mounted. do you have any suggestions on what i need to do or look at in order to get it fixed?
Click to expand...
Click to collapse
Because /data is (force-)encrypted. I uploaded a new TWRP build with various fixes but decryption doesn't work.
What I also found out is that the boot image for the Pixel C is NOT an Android boot image (!), but a ChromeOS one. This puts a lot of things in doubt, for example I am not sure if systemless SuperSU can handle this.
But, I'm working on all that (working on boot img without forced encryption right now, but so far it doesn't want to boot completely)
OK, so, I'm running the device unencrypted now, but there are many issues still to resolve.
OK guys, if you really want actual SuperSU, and other root stuff, and decrypted /data, here's how it works but it's complicated and will only work tethered as far as I can tell.
First, download this boot image: dragon-boot-encryptable-01092016-1.img
Now here are the steps:
- make sure you have a stock boot.img handy in case something goes wrong (as usual I can not take responsibility but chances of bricking are extremely slim if you know what you're doing)
- boot into fastboot
- flash the above boot image to boot ("fastboot flash boot dragon-boot....")
- flash the TWRP recovery (latest version) ("fastboot flash recovery twrp-dragon-...")
- hold power+vol down pressed.. the device will turn off, keep it pressed even as it turns off, it will turn on again and you are in the coreboot menu
- select "Android Recovery" which will start TWRP
- in TWRP, select system as read only when it asks ("never write onto the system partition").. my boot image does not disable dm-verity which seems to be still in effect, so if you change /system, the Pixel will refuse to boot (even though it's unlocked... no idea)
- once in TWRP, go to "Wipe" and then choose at the bottom "Format Data" (just wiping will not work)
- when that's done stay in the recovery
- get SuperSU 2.66 from somewhere and flash it through TWRP (using sideload for example)
- when it's done, go to "Backup" in TWRP and only backup boot (the kernel) - no password - no compression
- somehow copy the backed up kernel from the device to your computer ("adb pull" for example), but in no case let the Pixel boot into Android
- when that's done, tell TWRP to boot back into the bootloader
Now get ready to be real quick...
- boot (just boot, not flash) the TWRP backed up boot image (it's 32MB large and called boot.emmc.win, but it's all good): "fastboot boot boot.emmc.win" (and now you have to be rather quick)
- It will boot up for a second and then go back to the "The OS will boot in 30 seconds screen"
- Again press power+vol down and hold it, even as the device turns off, until you're in the coreboot bootloader
- There, choose fastboot again
- And once again boot the boot.emmc.win image ("fastboot boot boot.emmc.win")
- Now let it boot up
- If everything went OK you should be in Android, with decrypted /data, and SuperSU should be installed and working
If you want to avoid being encrypted again (although SuperSU should survive that) you will have to boot tethered everytime using that boot.emmc.win image.
Known Issues: Somehow because /data is decrypted, "Security" settings in Android will crash. Hopefully you don't need anything in there. You might also want to skip setting a lock pattern or pin when doing the initial setup, it might crash too.
So far, I tried installing AdAway using root which worked just fine.
If someone figures out how make this untethered: you da real MVP!
Thank you sir!! I will report back if I encounter any undocumented issues.
OK so I've managed to install Xposed, was pretty straightforward except for the tethered boot. Still looking into making it untethered.
since your modified boot and no encryption it seems to be smoother in graphics. in any event, the thing worked in format of data and install of the supersu zip. so, well done.
cheep5k8 said:
How to install:
- Unlock bootloader
- In the bootloader, run "fastboot flash recovery <.img file>"
- Reboot into Pixel C coreboot bootloader
- Boot into recovery (or later on/from Android through "adb reboot recovery")
DOWNLOAD
2.8.7.0-01082016-2 UPDATE: Includes various fixes from first build; decryption of data does NOT yet work
Click to expand...
Click to collapse
So, followed these instructions and whenever I try to reboot into recovery I get the no command screen. Am I missing something? lol
Edit: So figured thats the stock recovery stuff. Got to the stock recovery but can't get into twrp
2nd Edit: I redownloaded the file and didnt rename it shorter this time and now it works...weird
cheep5k8 said:
Not yet. I'm going to upload it later on to the TWRP devs for official inclusion.
You need to merge the minui patch so TWRP can use DRM for video on the Pixel C; there is no fb0 device.
Click to expand...
Click to collapse
Thank you for those informations .
Thank you so much for this! Aside from the laggy UI, which isn't an issue since we got TWRP (f yes!!!), this is amazing. Do you foresee any issues flashing fonts? I am not familiar with ChromeOS and Android structure combination as it seems there is a lot of talk about. Flashing a file that replaces the stock fonts with the ones of my choosing hypothetically should not pose a problem to /system/fonts/, correct? Thank you for your work
- T W R P 3.2.3-0L [Labs Mod] -
The Swiss Army Knife TWRP Mod for the Axon 7
INTRODUCTION
This was a long term project that I have been using for a long time. I created some scripts to make it easier and faster to flash new roms and quickly restore the daily driver configuration after a testing session. For easier access I modified the TWRP interface to add direct access to the scripts. They had many problems but they were good to me since I created them and I knew how to used them well, but they were not ready for other users.
But the time has come and I have cleaned up most of the annoyances in the tools and in the UI. I have named it "Labs Mod" since it allows me to have my flashing lab on the go, making it extremely easy to switch to different configurations, or recover the daily driver configuration in a few minutes. I believe it is free of major bugs and now I can concentrate on adding new scripts, and more options to the current scripts.
FEATURES
On top of the latest improvements introduced in the official TWRP 3.2.3-0, this mod offers the following added features:
Full vendor partition support (mount, format, wipe, partition image flash, TWRP backup and restore).
Integrated Bootstack backup and restore.
Modem firmware image flash
Reboot to EDL
Button to enable device mapper verity (DM-Verity) enforcing
Button to disable the eMMC write protection (disemmcwp)
Backup/Restore internal storage to the TWRP Backup folder in the external SD. Ensure you have enough free space, free space check is not yet implemented.
EDL backup zip creation. Dual zip use since the resulting zip can be installed using TWRP from the phone or using MiFlash from the computer. It offers the following package creation options:
OS: Operating system (boot, vendor and system).
GPT: Partition table only.
CONFIG: Device config data (IMEI, SN, MAC, etc).
BOOTSTACK: Boot firmware without modem.
MINIMAL: Includes GPT+bootstack+modem+recovery.
EMERGENCY: Minimal + device config.
FULL: Minimal + OS.
FACTORY: Includes Full + config.
Integrated Treble PARTY tool for creating and removing the vendor partition. Vendor partition is required for Treble ROMs. Removal is required for flashing old non-treble roms.
Lockscreen security removal. Removes password, pattern, fingerprint, etc... (in case you forget your password or the security descriptor gets corrupted).
Google account binding removal (in case you want to wipe from within recovery and test with different google accounts).
Bootloader unlock message removal.
New! Expand OS partitions (Vendor and System) to fit the whole partition. Useful for expanding the GSI filesystem for having space for adding GApps or moving apps to system.
New! Deep Wipe function performs a low level wipe of the partition data, erasing the remaining the portions of the eMMC that stored the partition information.
REQUIREMENTS
You need an unlocked Axon 7
INSTALLATION
WARNING, THIS SOFTWARE COULD WIPE ALL THE DATA IN YOUR DEVICE, INCLUDING THE INTERNAL STORAGE.
IT REQUIRES TWRP CUSTOM RECOVERY IN AN UNLOCKED DEVICE, OTHERWISE YOUR DEVICE COULD BE BRICKED.
!!! Whatever you do, it is at your own risk !!!
Follow these steps:
1. Download the TWRP Labs Mod image to your External SD card.
2. Boot to TWRP and select the Install option in the main manu.
3. Tap on the install image button and select your external SD. select the image file you downloaded, select the recovery partition and confirm.
4. Reboot to recovery again to ensure the changes are applied properly.
DOWNLOAD
TWRP_3.2.3-0L_v1.3-Axon7-Labs_Mod.img Flavor of the mod using the official TWRP 3.2.3-0 Kernel binary (Quick boot even when using F2FS, full ADB support, NO B12 Oreo encryption). Use this if you do not plan on using device encryption. Please note that you won't be able to use any tool of this version if your device is encrypted.
TWRP_3.2.3-0L_v1.3.B12-Axon7-Labs_Mod.img Device encryption enabled flavor of the Labs mod. It use the 3.2.1-8 TWRP Kernel binary (Long boot when using F2FS, NO ADB support, B12 Oreo encryption). Use this one if you use device encryption. Please note that this flavor doesn't support adb interface.
NOTES
1. I do not have the time and expertise to dig into kernel hack so this is why I do not provide a unified kernel with fast F2FS boot, ADB and B12 encryption. Probably people developing kernels could help on this issue. It would be nice having a kernel with proper F2FS boot support, B12 encryption and ADB interface. Until then, there is no other way than having 2 flavors depending on the features we require.
SOURCES
C'mon, all of them are scripts!!! the sources are at glance. Use them in your projects but don't forget to give credit to the source !!!
CREDITS
@NFound for the recovery kernel binary supporting Oreo B12 encryption.
@someone755 for the keycheck binary I use in my scripts.
@Chainfire for the TWRP install script hacks.
I hope you enjoy it as much as I did creating and learning throughout the enlightenment journey.
Nice.
Any info on the scripts that are included?
voetbalremco said:
Nice.
Any info on the scripts that are included?
Click to expand...
Click to collapse
Well, all of them are Bourne shell scripts. Some of them are stupidly simple such as those in the Reboot menu, and others in the Advanced > Oki Labs menu are very elaborated, specially:
- PARTY tool: for creating and removing the vendor partition. I released it a few days ago as a separated tool that could well work in other devices.
- EDL backup: for creating EDL flashable backups of a configuration. This tool will probably require a full thread due to the concepts involved. The big feature is that the generated zip can be also flashed using any TWRP.
- Internal Storage Backup/Restore: TWRP doesn't offer a straightforward solution for backing up the internal storage, since it is excluded from the data backup, now it is possible to create a backup and restore the contents of the internal SD in case you want to mess up with the userdata partition. Now this script creates a set of files under the TWRP/backup folder. I am planning to add the possibility of having different backup folders, the same way the GUI treats the data partition.
That is looking very sweet!!!
I'm excited, nice work man!
This is just fantastic!
Well, the non b12 version can't decrypt my device, running los 15.1
also, the lab options did nothing, and when I pressed on PARTY the recovery froze on me.
Hmm.
nfsmw_gr said:
Well, the non b12 version can't decrypt my device, running los 15.1
also, the lab options did nothing, and when I pressed on PARTY the recovery froze on me.
Hmm.
Click to expand...
Click to collapse
Well, that's why in the OP I provide 2 flavors of the mod. If you require decrypt then you have to use the B12. PARTY will not work either if your device is encrypted and you are using the 3.2.3-0L. In your case, using device encryption, you have to use the 3.2.3-0L(B12). You will have all the functions except for ADB. PARTY will work fine too.
Oki said:
Well, that's why in the OP I provide 2 flavors of the mod. If you require decrypt then you have to use the B12. PARTY will not work either if your device is encrypted and you are using the 3.2.3-0L. In your case, using device encryption, you have to use the 3.2.3-0L(B12). You will have all the functions except for ADB. PARTY will work fine too.
Click to expand...
Click to collapse
Got it.
I thought the B12 version was for stock-based ROMs.
Okay I'll flash the other one once I get home, thanks.
nfsmw_gr said:
Got it.
I thought the B12 version was for stock-based ROMs.
Okay I'll flash the other one once I get home, thanks.
Click to expand...
Click to collapse
I'll clarify it a bit more to avoid any misunderstanding. Sorry about that.
Oki said:
I'll clarify it a bit more to avoid any misunderstanding. Sorry about that.
Click to expand...
Click to collapse
Thnx for this tool ! I'll test that this weekend.
It would be great if you'd make a small guide on this with a couple of situations / a possible indepth review with screens / what's possible and what's definitely not possible with this twrp tool.
Anyway seems very promising :good:
Sheesh...i have no external sd card
I have garde flashed your TWRP_3.2.3-0L (B12) -Axon7-Labs_Mod.img but this version says when starting in twrp that my password is wrong. the version 3.2.1.8 of nfound unlocks my password quite normal
Excellent Job! I can't wait to get back my Axon 7 from RMA Services. I'm just going to need sometime to get this running coming from stock MIflavor.
Found bug. Installed the ADB version (thanks Cthulu!), wanted to check the functionality.
Went into the Storage Backup and my phone froze. Rebooting from ADB worked.
EDIT: tried to reproduce the issue - same thing happened 2nd time.
EDIT2: It freezes at any option in Oki Labs
docentore said:
Found bug. Installed the ADB version (thanks Cthulu!), wanted to check the functionality.
Went into the Storage Backup and my phone froze. Rebooting from ADB worked.
EDIT: tried to reproduce the issue - same thing happened 2nd time.
EDIT2: It freezes at any option in Oki Labs
Click to expand...
Click to collapse
I can't duplicate the issue. Are you sure you downloaded it properly? Do you have an SD card? The backup requires an SD card with enough space. Checking for free space is in the todo list for this weekend.
raystef66 said:
Thnx for this tool ! I'll test that this weekend.
Anyway seems very promising :good:
Click to expand...
Click to collapse
Not good enough!
It is downloaded properly. SD card has more than 100gb free space.
As mentioned in edit it is any option that I used in Oki Labs menu that froze my phone
docentore said:
It is downloaded properly. SD card has more than 100gb free space.
As mentioned in edit it is any option that I used in Oki Labs menu that froze my phone
Click to expand...
Click to collapse
What option are you testing? the Storage Backup? What format are you using in your SDCard? Does it happen at the beginning or after a while? Is there any file under TWRP/BACKUPS/STORAGE in your Micro SD after the failure?
@Oki this is amazing. Thank you.
Is it possible to use the recently released kernel sources from los15 to solve the issue of needing two revisions?
This version of TWRP works on both the TB-X605F (wifi) and TB-X605L (LTE). It does not work for the TB-X605FC/FL (Tab M10 FHD Rel).
Warning: this TWRP is for the Lenovo Smart Tab M10 with the Snapdragon 450 (SDA450) chipset. This image will not work for the second gen M10 (TB-X606F/L), which use a Mediatek SOC. See this thread.
For the M10 HD (TB-X505F/L), see this thread. For the TB-X505X, see this thread.
Code:
#include <std_disclaimer.h>
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Possible issues with TB-X605L
If the latest version of TWRP for TB-X605F doesn't work for your TB-X605L model, try version 3.4.0-0 from twrp.me.
Installation
TWRP for this device is officially supported. You can download it from twrp.me or in the TWRP App (from the PlayStore). Installation instructions are included on twrp.me.
It is recommended that you also install Magisk. This will ensure TWRP remains your default recovery.
Step-by-step guide
download TWRP to your PC (see the Download section below)
download magisk.zip to your MicroSD or OTG device. Get the latest Magisk zip file here.
if your bootloader is already unlocked, go to step 4. To unlock bootloader:
on tablet: go to Settings->System->About and press "Build number" 7 times to enable Developer Options.
on tablet: go to Settings->System->DeveloperOptions. Turn on: "OEM unlocking" and "USB debugging".
connect tablet to your computer. Tablet will ask for permission to "Allow USB debugging". Tick "always allow" and select "OK".
backup any files you want to keep to an external device (MicroSD/OTG/computer), because the next step will wipe all your photos, files, google account etc on the tablet.
Now unlock the bootloader:
Code:
adb reboot bootloader
fastboot oem unlock-go
fastboot reboot
flash the twrp image:
Code:
adb reboot bootloader
fastboot flash recovery twrp.img
if you haven't loaded Magisk yet, go to step 6. If you have already loaded Magisk, you can just reboot and you're finished:
Code:
fastboot reboot
adb reboot recovery
load Magisk (step one): reboot to recovery. Do not reboot into the system, because it will over-write TWRP with stock recovery. If that happens, go back to step 4 and start again. When you issue the reboot command (below), you have to immediately press the button combination to reboot to recovery (TWRP). Here are the steps:
issue the reboot command:
Code:
fastboot reboot
immediately press and hold all three buttons (Pwr+VolUp+VolDown). The tablet might reboot twice. Release all the buttons when you see the TWRP screen, or hear your PC acknowledge that ADB is connected.
load Magisk (step two): flash Magisk. In TWRP:
select "Install"
use "select storage" to locate device you stored magisk.zip on.
press the OK button
select the Magisk zip file
swipe to confirm Flash
when Magisk is finished, hit the back button to go back to main TWRP screen.
select "Reboot" then "System"
if the Magisk Manager app wasn't automatically loaded, you can get it here.
finished!
If you prefer to use button combos, rather than fastboot/ADB commands:
Vol Down + Power = fastboot mode
Vol Up + Vol Down + Power = recovery mode
Changelog
Code:
02/03/2022 - TWRP 3.6.1_9: new TWRP release
23/11/2021 - TWRP 3.6.0_9: new TWRP release
01/01/2021 - TWRP 3.5.0-0: new TWRP release
21/11/2020 - TWRP 3.4.0-1: new official version with SPL patch
19/11/2020 - promoted security patch level to 2099-12-31. No need to worry about SPLs ever again.
02/09/2020 - promote security patch level to 2020-08-01 for TB-X605F_S210208_200807_ROW
06/08/2020 - officially supported
31/07/2020 - upgrade to TWRP 3.4.0-0
- data decryption working (security patch 2020-04-01)
- landscape mode (by popular demand)
- add more partitions to Backup options
15/01/2020 - reverted to API 28 (Android Pie)
- renamed "sdcard1" to "external_sd"
- changed [ro.build.incremental.version] in preparation for OTA #4
24/11/2019 - fixed date/time & EDL reboot mode
- dropped back to API 27
20/11/2019 - initial commit (API 28) - encryption/decryption not working
Downloads
official
TWRP for X605F: twrp.me
Source code
github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-9.0
github.com/TeamWin/android_device_lenovo_X605F (official)
github.com/Yahoo-Mike/recovery_device_lenovo_X605F (unofficial)
FAQ
See the third post for answers to some FAQs like:
Will this TWRP work with other M10 and P10 devices?
Why is my "Data" partition empty (0 MB)?
how do I root my device?
Credits
The guys at TeamWin Recovery Project.
Everyone whose device trees I plagiarised from GitHub.
The amazing work of @Chaser42, @Long_Sam and others to get this project started.
XDA:DevDB Information
X605F Recovery, Tool/Utility for the Lenovo Thinkpad Tablet
Contributors
Yahoo Mike, Chaser42
Source Code: https://github.com/TeamWin/android_device_lenovo_X605F
Version Information
Status: Testing
Created 2019-11-19
Last Updated 2022-05-22 (v3.6.1 and warning for TB-X605L)
Encryption/Decryption
When you load the stock ROM, it creates and automatically encrypts the data partition. If you are not using the correct TWRP version, the data partition might be empty (0 MB). This is because TWRP failed to decrypt the data partition.
If your data partition is 0MB in TWRP, make sure you have loaded the latest version of TWRP (Nov 2020 or newer). Older builds required the security patch levels to match on TWRP and your system.
If you want to remove encryption completely, then you can use the dm-verity-forceencrypt tool. @turboperson123 has put together some instructions to remove encryption. If you've already loaded TWRP, then you only need to follow steps 6 and 7 from that post. @turboperson123 's method uses @Zackptg5 's Universal DM-Verity, ForceEncrypt, Disk Quota Disablers tool to remove encryption and dm-verity.
FAQs
Can I use this TWRP on other M10 and P10 tablets?
There are quite a few variants of these Tabs that use the Snapdragon 450 (SDM450) chipset:
TB-X605F (Tab M10 wifi) - tested working this TWRP
TB-X605L (Tab M10 LTE) - tested working with TWRP ( thanks @alexupsa )
TB-X705F/L (Tab P10) - no. Use the twrp available on this thread.
For the TB-X505F/L (M10 HD) see this post.
NOTE: the TB-606F/L (M10 2nd gen), TB-X605FC (M10 FHD) use different chipsets, so this TWRP won't work.
Why is my "Data" partition 0MB?
See the second post in this thread.
What should I backup?
Short answer: everything.
But the bare minimum might include:
System Image
Vendor Image
Firmware/Modem
Persist
Data
Cache
Boot
How do I root my device?
To root your device, here are the instructions for the:
X705F (thanks to @Chaser42)
X605F/L - follow steps 6 & 7 in the OP above. If you don't want to load TWRP, then try something like @Long_Sam's patched boot.img method.
X505F/L - follow the "step by step guide" in the OP above. Just make sure you use twrp for X505F (not for X605F).
How do I load OTAs with TWRP?
Note: if you ran the dm-verity-forceencrypt tool to unencrypt your /data, then the steps below will not work.
select "uninstall" in the Magisk Manager app. If MM doesn't reboot the system, then reboot - this will re-install stock recovery.
install the OTA (either in the system or using stock recovery).
re-flash TWRP (for the new security patch level)
re-install Magisk
TB-X605L working properly. Thank you!
TB-X605L working properly. Thank you!
Yahoo Mike said:
This is a work in progress. Volunteer testers are very welcome.
Click to expand...
Click to collapse
Wow...
That's really huge...
As we say here : "Monsieur, chapeau bas !"
Long_Sam
Lenovo has released quite a few variants of the Tab M10 now. I'm not sure this TWRP will work on all of them.
There are now even variants of a variant !
Code:
[B]M10[/B] with SDM-450 models: X605F (wifi) & X605L (LTE)
[B]M10 HD[/B] with SDM-429 models: X505F (wifi), X505L (LTE) & X505X (LTE Bands 1,2,3,4,5,7,8,20,38,40)
[B]M10 FHD[/B] with SDM-450 models: X605FC (wifi) & X605LC (LTE)
The M10 I have is shipped with a Snapdragon 450 (SDM-450) chipset & Hardware Code 63. But I see on their US site that Lenovo are now putting the SDM-429 in the X605. This might cause a problem with TWRP. I'm not sure if the kernels will be compatible.
The TWRP I've posted is for the X605F/L SDM450 (HW=63). I might need to compile a different TWRP for the SDM429 versions of the X605 & the X505.
If your X605 or X505 shipped with the SDM429, can you let me know if this TWRP works ? I need to know the Hardware Version, CPU and Hardware Code. Hardware Version and CPU are in System->About. The Hardware Code is in brackets after the S/N on the sticker on the back of the tablet, eg S/N Hxxxxxxx (63).
If you have an X605FC/LC, let me know if this TWRP works. I think it will, but I want make sure.
I have one with the 429 TB-X505F SD429 HW71 If i get some time today I might be bale to try it. I'll post soon as I do.
This morning I successfully compiled and ran the P10 kernel source on my M10. I had to tweak the config a bit. I tested it in TWRP. No problems.
Tomorrow, I'll inject it into the boot.img of the system ROM and see what happens. If it is mostly stable, then we're on the way to LOS for the M10. If it's completely stable, I'll push the source up to github.
I'll continue to use the stock kernel for the released versions of TWRP in this thread, though.
Thanks to @clsA for helping me work out that the M10 kernel is a subset of the P10 kernel.
@Yahoo Mike
thx for the twrp
succesfully flashed on my X605L
"Stock recovery image (recovery_stockROM.img) from TB-X605F_USR_S200065_1905280020_Q00332_ROW - just in case something goes wrong & you need to restore stock recovery. Only use this image on a TB-X605F. If you need it for any other variant, just ask in this thread and we'll track it down for you."
do you have the stock recovery for the X605L ?
how can i backup "DATA" inside twrp ?
will this help ?
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
OSIRIS2010 said:
...
do you have the stock recovery for the X605L ?
Click to expand...
Click to collapse
Now I think of it, you don't need it. If TWRP fails to flash, then stock recovery will still be there. If stock recovery is still not loading, just boot into the system and shutdown. When you shutdown, the system will re-flash stock recovery for you.
OSIRIS2010 said:
...
how can i backup "DATA" inside twrp ?
Click to expand...
Click to collapse
Have a look at the second post.
TL;DR...the dm-verity-forceencrypt tool will do it. But it will break the next OTA. The unencrypted P10 guys are having problems at the moment with this.
I've tried to get TWRP to unencrypt the data partition, but I can't get KeyMaster to initialise successfully. Maybe the next version of TWRP will be able to do it.
Yooo. Sorry I took so long works been crazy. I cant get it to reboot into twrp recovery. Its flashes the 605 recovery then I follow the next steps in the guide but I can only get it to reboot to the stock recovery screen. Run the reboot recovery command then immediately hold the volume + - down along with power. I tried a lot I let reboot twice then let off, and nothing then I tried several more times. Reflashing then the next step. I must not be holding my mouth...err I mean pushing the buttons right or the recovery just isn't gonna work. Add I'm very newbie at rooting and customizing. I've I've rooted one phone. A 70$ moto g5 plus I got off Ebay that was basically brand new. Installed twrp recovery and magisk. I bought that cause I have SD note 9 I cant root and have this need to play YouTube videos in my truck lol. Let me know if you have any suggestions I can try. Or ideas that might make it work. I pretty much fubard the tab and (at a different time) before I tried this recovery and was able to reflash stock img though odin.
11mackey11 said:
Yooo. Sorry I took so long works been crazy. I cant get it to reboot into twrp recovery. Its flashes the 605 recovery then I follow the next steps in the guide but I can only get it to reboot to the stock recovery screen. Run the reboot recovery command then immediately hold the volume + - down along with power. I tried a lot I let reboot twice then let off, and nothing then I tried several more times. Reflashing then the next step. I must not be holding my mouth...err I mean pushing the buttons right or the recovery just isn't gonna work. Add I'm very newbie at rooting and customizing. ...
Click to expand...
Click to collapse
Don't be too hard on yourself...you've done well to get this far.
I just had a quick look at the kernel for the X505F. It's very different from the X605F. So this TWRP definitely won't work for you. Sorry.
If you want me to build a TWRP for the X505F, PM me and we'll work something out.
How do you remove twrp I think that or magisk is giving me the booting issues. Half the time I reboot for things it gets stuck. Not sure if it's root or twrp but I can't seem to remove either.
cbomb1337 said:
How do you remove twrp I think that or magisk is giving me the booting issues. Half the time I reboot for things it gets stuck. Not sure if it's root or twrp but I can't seem to remove either.
Click to expand...
Click to collapse
If you uninstall Magisk, then the system will overwrite TWRP with stock recovery the next time you reboot. Just tap "uninstall" in the Magisk Manager app. You can also remove Magisk from TWRP following these instructions.
What kind of boot issues are you having? Are you using a TB-X605F with SDA450? Or is it something similar?
I am using Tb 605f it seems to be booting fine now after removing this riru module and edxposed. I'll just leave that and stick with just viper 4 Android lol
Do you know if them modules for increasing speed work? I think one of them was called fde and there the doze one.
cbomb1337 said:
I am using Tb 605f it seems to be booting fine now after removing this riru module and edxposed. I'll just leave that and stick with just viper 4 Android lol
Do you know if them modules for increasing speed work? I think one of them was called fde and there the doze one.
Click to expand...
Click to collapse
Good to hear it's all working again.
Sorry, I haven't tried any of those tweaks.
Lenovo have updated the stock ROM they serve for the TB-X605F through LMSA rescue. It's now at TB-X605F_USR_S210126_1910290024_Q00332_ROW. This is the latest update. There are no OTAs to apply. The M10 is due for a security OTA pretty soon, though. The P10 has already received it.
Unfortunately, it's no longer possible to post a direct link to Lenovo's website for this ROM. You'll have to use LMSA to get it.
FYI. Lenovo have changed how they serve the stock ROM. The ROM is now kept at rsdsecure-cloud.motorola.com. LMSA seems to generate (or request and receive) a one-off time-limited credentialed ticket for the download. You can't download the zip files without the credentials attached to the URL.
If you really want to, you can still intercept the URL in download_resources.json in the LMSA download folder.
is there anything new in the update. i might hold of because i dont want to lose root.
cbomb1337 said:
is there anything new in the update. i might hold of because i dont want to lose root.
Click to expand...
Click to collapse
No, there's nothing new. This isn't really an update, it just seems to be a consolidation of the old stock ROM and incremental OTAs.
This is only for M10 wifi (TB-X605F) with SDA450.
The latest OTA for TB-X605F has just landed. It's available on your tablet, or directly from: TB-X605F_USR_S210126_191029_Q00332_ROW_TO_TB-X605F_USR_S210152_200120_Q00332_ROW_WCE26E2CD5.zip.
The update takes the M10 to:
Code:
build: TB-X605F_USR_S210152_200120_ROW
security patch: 1 January 2020
kernel: 3.18.120-perf-gd60e12b6-dirty
If you have TWRP and root, you'll need to:
select "uninstall" in the Magisk Manager app
install the OTA (from SD card) in recovery and reboot
re-flash TWRP
re-install Magisk
only if you unencrypted the data partition
If you have unencrypted your data partition, it will be re-encrypted during this process. Make sure you back it up before you start the OTA. You might also need to restore the TWRP backup you made of the vendor partition, before the OTA will run. Once the OTA, TWRP and Magisk are installed, you can re-run the dm-verity tool.
I'M NOT RESPONSIBLE FOR ANY BRICKED DEVICES, DATA LOSS, OR THE WORLD WAR III...
FLASH THIS AT YOUR OWN RISK
ALWAYS READ THE INSTRUCTIONS BEFORE INSTALLING ANYTHING CAREFULLY.
IF YOU ARE NOT SURE, ASK IN THE COMMENTS BELOW OR IN THE TELEGRAM GROUP FOR HELP. OTHERWISE, DON'T BLAME ANYONE OTHER THAN YOURSELF
Bugs
-Userdata decryption is not working. You can flash multi disabler (check this before flashing) to disable encryption or use an external SD or USB OTG for putting ZIPs and IMGs on it in order to flash them
- Data backup is not working due to device encryption
How to Install
0. READ F.A.Q section first here
1. Unlock your bootloader
2. Boot to Odin mode
3. Check AP box and select TWRP tar file
4. Hit start
5. Reboot to TWRP and flash multi disabler if you want (check this before flashing it)
6. Have fun
Download
TWRP 3.5.1_10 - Beta 2
Multi Disabler
Sources
TWRP device tree
Kernel source
Change Log:
Beta 2 - 24th of March 2021
- Update to latest kernel 4.14.190
- Fix MTP on the latest kernel
- Clean up dynamic partitions
- Released kernel 4.14.190 source
Beta 1 - 20th of March 2021
- Initial Release
F.A.Q:
What is data encryption and why doesn't it work on TWRP?
Samsung M51 uses file-based encryption that encrypts the user data partition.
By default, TWRP can't decrypt user data partition, which makes it impossible for us to access the internal device storage from TWRP or recovery MTP, which means you can't put ROM files on your internal phone storage and flash them from there.
What is Multi disabler and how does it affect your phone?
- Multi disabler disables and removes the encryption on the data partition, which makes it possible for you to access your internal storage from TWRP or recovery MTP. thus, making it possible for you to flash files from internal storage.
- Removing the encryption on your device's internal storage makes it possible for you to access your files from recovery directly, which makes it possible for anyone to access your private files without your permission from recovery.
- All of the above means that your device will be less secure. So if you care about device encryption then don't flash the multi disabler and use a USB OTG or a sdcard to flash ROMs, which I recommend. Otherwise, flash the multi disabler at your own risk!!!
- FLASHINF MULTI DISABLER REQUIRES PERFORMING A FULL DATA WIPE WHICH MEANS YOU WILL LOSE YOUR DATA. SO BACKUP YOUR DATA BEFORE FLASHING IT.
My device keeps rebooting to recovery after flashing TWRP, why?
Most probably you will need to wipe your data partition and flash multidisabler
Data backup is not working even after flashing multidisabller, why?
Current multidisabler still can't fully disable FBE encryption, which means that TWRP can't read data partition at all, hence creating backups will always fail.
Reserved just in case
Thank you so much for your efforts,
Does backup, restore, work smoothly in this version of twrp? Does it fully restore after making a backup? Or are there still mistakes?
In Twrp 3.4.0 Data backup is not loading. Nonoperating. But the system is loading.
Oh, thank you, thank you.
onurmemo77 said:
Thank you so much for your efforts,
Does backup, restore, work smoothly in this version of twrp? Does it fully restore after making a backup? Or are there still mistakes?
In Twrp 3.4.0 Data backup is not loading. Nonoperating. But the system is loading.
Oh, thank you, thank you.
Click to expand...
Click to collapse
Currently I have no working ROM so I can't test back and restore functionality. But backing data should be working.. don't take that for granted tho..
It would be great if you can test that and report if it's working or not, or wait until I or someone else test that.
thank you for your efforts. i installed this twrp and flashed mutlidisabler. also formatted data before reboot. Unfortunately twrp does not allow to create backups. Cannot unmount system partition etc...Your android 10 TWRP version is creating and restoring backups allright. So for now have to continue using android 10!
ilya33 said:
thank you for your efforts. i installed this twrp and flashed mutlidisabler. also formatted data before reboot. Unfortunately twrp does not allow to create backups. Cannot unmount system partition etc...Your android 10 TWRP version is creating and restoring backups allright. So for now have to continue using android 10!
Click to expand...
Click to collapse
What error do you get? Can send me the recovery log?
LahKeda said:
What error do you get? Can send me the recovery log?
Click to expand...
Click to collapse
i do not remember how to retrieve recovery log. this is a screenshot after I tried to do twrp backup:
ilya33 said:
i do not remember how to retrieve recovery log. this is a screenshot after I tried to do twrp backup:
Click to expand...
Click to collapse
backups will not work because of device encryption. Even after flashing mutldisabler, the device will keep encrypting the data.
LahKeda said:
backups will not work because of device encryption. Even after flashing mutldisabler, the device will keep encrypting the data.
Click to expand...
Click to collapse
Thanks.
Do you think that Magisk prerooting prior to TWRP flash might help here?
Or maybe we should just for full official Android 11 twrp release...
TeamWin updates TWRP to 3.5.1, Android 11 support coming soon
They're calling it a 'mini release' with a few notable feature improvements
www.androidpolice.com
LahKeda said:
backups will not work because of device encryption. Even after flashing mutldisabler, the device will keep encrypting the data.
Click to expand...
Click to collapse
Fyi -i have spare m51 device with android 11 installed. Ready to use it for any kind of twrp test builds. This is a good phone and we must have twrp for android 11 developed here. Thanks
ilya33 said:
Thanks.
Do you think that Magisk prerooting prior to TWRP flash might help here?
Or maybe we should just for full official Android 11 twrp release...
TeamWin updates TWRP to 3.5.1, Android 11 support coming soon
They're calling it a 'mini release' with a few notable feature improvements
www.androidpolice.com
Click to expand...
Click to collapse
prerooting won't solve encryption issues. Maybe when TWRP can be build using android 11, we can fix encryption issues or at least partially fix it.
ilya33 said:
Fyi -i have spare m51 device with android 11 installed. Ready to use it for any kind of twrp test builds. This is a good phone and we must have twrp for android 11 developed here. Thanks
Click to expand...
Click to collapse
Then go ahead and test this one. plus lineage 18.1 will drop here soon!
Backup failed
Error code: 255
saleem137 said:
Backup failed
Error code: 255
Click to expand...
Click to collapse
Did you even read the FAQ section?
anyways, backups will fail because of data encryption
Does this TWRP require to format data after installing without Multi disabler?
smallKING81 said:
Does this TWRP require to format data after installing without Multi disabler?
Click to expand...
Click to collapse
Nope, but you may need to install multidisabler to prevent the phone from reverting back to stock recovery. Don't formate the data after flashing Multidisabler and see if the phone boots or not
LahKeda said:
Then go ahead and test this one. plus lineage 18.1 will drop here soon!
Click to expand...
Click to collapse
well i already tested that twrp build and it does not allow to create backup (which is the main reason i need twrp to start with). i will test your lineage roms no problem. Do you think that twrp will work properly with lineage 18?
ilya33 said:
well i already tested that twrp build and it does not allow to create backup (which is the main reason i need twrp to start with). i will test your lineage roms no problem. Do you think that twrp will work properly with lineage 18?
Click to expand...
Click to collapse
Data backup doesn't work because of data encryption.
Yes! it's working without any problems with lineage 18
Update: March 24 2022: This ROM has been retired and a new one based on LOS 19.1 (and TWRP based on Android 11) have taken its place. New thread here: https://forum.xda-developers.com/t/...4-2020-lineageos-19-1-and-twrp-3-6-1.4421365/
---
Update 9:46am EST July 15 2021: new builds of TWRP and LineageOS with TWRP touch fixed and LOS w/ space for Gapps is now live.
WARNING: USE AT YOUR OWN RISK.
I have successfully ported TWRP and Lineage OS 18.1 to the Samsung Galaxy Tab A7 10.4 (2020), aka SM-T500. This is my first time porting TWRP or LOS, so there may be issues unknown about at this time. Thus far, the only known issue is that the touchscreen in TWRP does not work. This can be worked around by using a USB mouse and/or accessing the device via ADB.
Here are the steps to follow:
Update your device to the latest stock ROM (as of this writing) either using the built-in system updater or via Odin. You want the build that ends with "3BUF3".
Unlock device bootloader using instructions from other threads. This will wipe your device.
Boot into download mode and flash "vbmeta_disabled_R.tar" via Odin in the "Userdata" slot to disable verified boot. This will wipe your device again.
Boot device back into download mode and flash TWRP via Odin in the "AP" slot. If you boot up into the stock ROM rather than booting directly back into download mode then go through the initial setup process of the stock ROM and enable developer tools and ensure OEM Unlocking is still enabled (VaultKeeper can possibly undo OEM Unlocking if you get to the ROM but don't go into Developer Tools and view OEM Unlocking is enabled, so make sure to do this).
Boot device into TWRP (recovery mode) and format (not wipe) your data partition. Then reboot back into TWRP.
Push LineageOS (super.new.ext4.img) to device. Ideally push it to an SD card formatted with ExFat or EXT2/3/4 (FAT/FAT16/FAT32/VFAT won't work due to file-size limitations).
Install LineageOS image to "Super" partition. Make sure to select "Install from Image" in order to show .img files in the install selector screen.
(Optional) Push NikGapps Omni to your device and install the zip. Make sure you include a "nikgapps.config" file in your "/tmp" folder that is configured to install to "system" rather than "product" or "default".
Reboot to system. You should now be in LOS with Gapps.
(Optional, but recommended): Install Magisk via TWRP
(Optional, but recommended): Run fix script to fix brightness slider not working and to make Magisk work. If you didn't install Magisk but only want the brightness fix, just enter "n" when prompted in the script. To run the script:
NOTE: Script has .txt file extension to allow hosting on AFH. Remove that so it's just .sh to match the instructions below.
Download and push to device when booted into TWRP
adb push sm-t500_fixes.sh /tmp
Enter an adb shell
adb shell
Change directories and set permissions
cd /tmp
chmod +x /tmp/sm-t500_fixes.sh
Run script
/tmp/sm-t500_fixes.sh
Tips:
If you are not seeing all of your storage space in the OS on the internal flash, boot to TWRP and format data.
Flash TWRP via "AP" slot and flash VBMeta_Disabler via "Userdata" slot in Odin.
Flash LineageOS as an Image, not as a Zip.
For Gapps, use the latest NikGapps for ARM64 and Android 11/R.
For Gapps, make sure you install to the System partition and not Product. To do this you need to slightly modify a nikgapps.config file. Instructions on that can be found on the NikGapps site.
Downloads:
LineageOS 18.1 20210615 Beta 2: https://www.androidfilehost.com/?fid=14943124697586369438
TWRP 3.5.2 Beta 3: https://www.androidfilehost.com/?fid=14943124697586369439
vbmeta_disabled_R: https://www.androidfilehost.com/?fid=14943124697586369440
Fixes for brightness and Magisk (sm-t500_fixes.sh): https://www.androidfilehost.com/?fid=14943124697586369521
Known Issues:
OS-encrypted storage (Internal Data) not able to be decrypted in TWRP.
Brightness controls don't work: Fixed via "sm-t500_fixes.sh script.
TWRP touch screen doesn't work (use USB keyboard or adb). Should be fixed with TWRP Beta 3.
TWRP formatting external SD card may hardbrick device. Do not do this! Fixed with TWRP Beta 2.
Source (device tree for TWRP from my Github): https://github.com/agreenbhm/android_device_samsung_gta4lwifi
Source (kernel sources from Samsung): https://opensource.samsung.com/uploadSearch?searchValue=Sm-t500#
agreenbhm said:
I have successfully ported TWRP and Lineage OS 18.1 to the Samsung Galaxy Tab A7 10.4 (2020), aka SM-T500. This is my first time porting TWRP or LOS, so there may be issues unknown about at this time. Thus far, the only known issue is that the touchscreen in TWRP does not work. This can be worked around by using a USB mouse and/or accessing the device via ADB.
Here are the rough steps to follow:
Unlock device bootloader using instructions from other threads.
Patch stock ROM (AP) using Magisk, then flash rooted ROM. Will likely need to wipe device after this.
Boot into rooted ROM and ensure "OEM Unlocking" is still enabled in "Developer Tools".
Boot back into download mode and flash "vbmeta_disabled_R.tar" to disable verified boot.
Boot device back into rooted stock ROM to ensure things are still functional (may require a device wipe at this step).
Boot device into download mode and use ODIN to flash TWRP recovery.tar file via "AP" slot.
Boot device into TWRP to verify functionality (hold Vol-Up + Power during boot).
Access TWRP via adb using "adb shell" or with USB mouse (touch functionality currently not working).
Format data partition on device.
Via ADB shell: twrp format data
Via USB mouse: Wipe -> Advanced -> Format Data
Boot device into download mode.
Via ADB shell: twrp reboot download
Via USB mouse: Reboot -> Download
Flash LineageOS tar file via ODIN using the "AP" slot.
If device boots into TWRP after flashing LineageOS, use USB mouse to select: Reboot -> System
Device should boot and stall for ~1m at the Samsung logo screen with red text below, then should go blank and then display LineageOS boot image.
Downloads:
LineageOS 18.1 20210615 with TWRP 3.5.2: https://mega.nz/file/vMVglThZ#TepIHvdEypezq3z4S_4Lln7FRFVfC7CUjVGq3ByFb6U
TWRP 3.5.2: https://mega.nz/file/GYU1yCCQ#JsthI8BYNtfB08Pzt1eeXta2Lb1zCkUI185Zm88dEW4
vbmeta_disabled_R: https://mega.nz/file/iMFx3CQI#8cP4mPoRaQNwDATqt0vKD8wxqRWSTz1EL79U0fNpW8M
Click to expand...
Click to collapse
Great news!! But I think you need to post it in the ROMs, Kernels, Recover thread.
awesome. Will try after work. Also I think you posted in the wrong section.
Which slot to flash the vbmeta?
wizzdome said:
Which slot to flash the vbmeta?
Click to expand...
Click to collapse
AP
Thanks,
After flashing the vbmeta it booted into recovery automatically after what looked like a bootloop in progress, so I wiped with factory reset and then it rebooted fine. (still not sure exactly what the vbmeta does I was hoping it would make it so i didnt get that stupid pop up asking me to hit power button to continue booting due to it having the patched os) anyhow booted fine and twrp installed as you stated without touch screen but mouse with otg works fine. (great job so far) On to LOS... I think I should have checked oem lock before flashing LOS as when I installed I get stuck at boot screen that says oem lock is on... must have been from my factory reset... (facepalm)
Nope... Still sticking on boot with the following showing on the screen...
RPMB fuse not set
RPMB Provisioned
Current BInary: Custom (0x30f)
FRP Lock : OFF
OEM Lock : ON (U) {this was off verified before flash}
KG Status : Checking
Waranty Void : 0x1 (0xE02)
Quallcomm Secureboot : Enable
RP SWREV : B3 (1,1,1,3,1,1) k3 s3
secure download : enable
grdm status : normal (d0000501)
did : 041ce2d22dba
this is displayed in the corner on the bootscreen and looks like it belongs on the download screen, anyhow booting into twrp from this point works however factory reset fails with unable to mount key(something and key(something else) i figure i will let it sit a while as I know sometimes it just takes first boot a while to go through however it doesnt seem to be the problem. Have you had a positive install of the LOS? I am wondering if I had maybe gotten a bad copy of the file. When i go to install I get a pass in odin so not quite sure where to go from here other than back to the factory image any help to get this going would be great... I took on this task cause i needed someting to take my mind off the severely crappy week I have had... so looking forward to anything you can share here...
Actually, userdata is the slot I always use. It might work in both though.
Something to mention: there is not enough space on the /system partition to flash Gapps. I created a build that supports it (with a resized /system partition) but I couldn't get it to flash via Odin. The only way I got it to work was by flashing it via TWRP as an img file. I will be posting that soon. Unfortunately that will be the end of development for now as I hard-bricked the device and need to wait for a repair or replacement. Should be back developing in 2 weeks.
Nevermind what I said here.
jayzarry84 said:
Anyone get this to work? I just flashed the TWRP part but have not been able to get into TWRP
Click to expand...
Click to collapse
Get adb access in the OS and then run "adb reboot recovery"
agreenbhm said:
Get adb access in the OS and then run "adb reboot recovery"
Click to expand...
Click to collapse
question. I don't have an OTG cable and TWRP keeps booting. I've tried rebbot, rebbot bootloader, reboot system. any advice?
jayzarry84 said:
question. I don't have an OTG cable and TWRP keeps booting. I've tried rebbot, rebbot bootloader, reboot system. any advice?
Click to expand...
Click to collapse
You may need to get an otg cable for a USB mouse and choose "reboot system" from the gui. Alternatively, look at the /dev/block/by-name/misc partition and try blanking that out with dd. That has worked sometimes.
jayzarry84 said:
question. I don't have an OTG cable and TWRP keeps booting. I've tried rebbot, rebbot bootloader, reboot system. any advice?
Click to expand...
Click to collapse
Also, from an adb shell, try "twrp reboot". Supposedly that should boot to system, but I feel like in testing I got mixed results. According to the TWRP documentation though that should be the answer.
agreenbhm said:
Also, from an adb shell, try "twrp reboot". Supposedly that should boot to system, but I feel like in testing I got mixed results. According to the TWRP documentation though that should be the answer.
Click to expand...
Click to collapse
Not working. I'll wait for my otg cable to come in
jayzarry84 said:
Not working. I'll wait for my otg cable to come in
Click to expand...
Click to collapse
I was able to use adb to run the TWRP Format Data command and it rebooted the tablet and now LOS has booted up. I think I'm good!
Looking forward to see how this develops
Rom is fast and snappy. Brightness control does not work. I haven’t played too much because of work but that’s what I’ve found so far
Can a mod move this to the rom release section?
agreenbhm said:
Something to mention: there is not enough space on the /system partition to flash Gapps. I created a build that supports it (with a resized /system partition) but I couldn't get it to flash via Odin. The only way I got it to work was by flashing it via TWRP as an img file. I will be posting that soon. Unfortunately that will be the end of development for now as I hard-bricked the device and need to wait for a repair or replacement. Should be back developing in 2 weeks.
Click to expand...
Click to collapse
I've not been able to flash this yet but I know that the latest TWRP versions have a way to fix the system partition to accept gapps. /Wipe/Advanced check system then resize. Sometimes you have to do it more than once if it is a large gapps.
lewmur said:
I've not been able to flash this yet but I know that the latest TWRP versions have a way to fix the system partition to accept gapps. /Wipe/Advanced check system then resize. Sometimes you have to do it more than once if it is a large gapps.
Click to expand...
Click to collapse
I will look into that, but I'm not optimistic it will work. This device does not separately present the system partition, rather it uses a super partition which contains system, vendor, product, and odm. TWRP only shows me the super partition for working with. I was able to resize the system partition by expanding the Lineage image and file system on my pc to match the original stock system partition, then rebuilt the super image with the other partitions it needs.