Database Develop

Install Issues Xposed installer

Hello,
I am having an issue where when I try to install the Xposed installer I am not able to press the Install button. I am running a GS4 with Task650 Rom from 6/17/14. I am properly rooted and root check says I have root access. Whenever I try to install the app I am not able to press the Install button. I am not running any filters and this is a clean install. I cleared the Devlik and cache but i still have the same issue. I have tried v29, v31 and v32 and all have the same issue. Please help this is really frustrating.

Check again and make sure you're not running any screen filters or anything that draws on top of other screens.

I'm having a nearly identical issue but instead I already have xposed installer installed and I am trying to update it and also install more modules. I get to the install screen and cannot click the install button.

Souler19 said:
I'm having a nearly identical issue but instead I already have xposed installer installed and I am trying to update it and also install more modules. I get to the install screen and cannot click the install button.
Click to expand...
Click to collapse
At least read the post above yours, and actually indicate if you've tried what it says.

I'm sorry, i assumed that was implied. I have no screen filters that i am aware of nor do i have anything active that draws on top of other screens. I am having the issue on my Galaxy note 3 running Hyperdrive RLS8 if that helps any. I am experienced but far from an expert in these matters, please tell me what you need in order to help me help myself .

That did it I went through all my apps settings and disabled draw on top for everyone.Its wierd because I have no filters installed maybe FB messanger caused that. Thank you very much for the help

SlowReload said:
That did it I went through all my apps settings and disabled draw on top for everyone.Its wierd because I have no filters installed maybe FB messanger caused that. Thank you very much for the help
Click to expand...
Click to collapse
How do you go through your apps and disable draw on top?

Souler19 said:
I'm sorry, i assumed that was implied. I have no screen filters that i am aware of nor do i have anything active that draws on top of other screens. I am having the issue on my Galaxy note 3 running Hyperdrive RLS8 if that helps any. I am experienced but far from an expert in these matters, please tell me what you need in order to help me help myself .
Click to expand...
Click to collapse
You can try killing all running apps, that'll probably allow you to install the APK. (Again, I'd like to point out that this is not an issue with Xposed. It would also happen with any other APK.)

GermainZ said:
You can try killing all running apps, that'll probably allow you to install the APK. (Again, I'd like to point out that this is not an issue with Xposed. It would also happen with any other APK.)
Click to expand...
Click to collapse
Thank you for taking the time to address my concerns. The first thing i tried was to clear all apps, and even clear the phones ram in order to make sure no other apps were bothering it. The problem seems to be related to the package installer app. Clearing active apps and ram has not helped my issue.
---------- Post added at 06:21 PM ---------- Previous post was at 06:15 PM ----------
GermainZ said:
You can try killing all running apps, that'll probably allow you to install the APK. (Again, I'd like to point out that this is not an issue with Xposed. It would also happen with any other APK.)
Click to expand...
Click to collapse
Problem solved, your information made me think enough to research elsewhere and find the problem. Turns out it was Echo Lockscreen app causing the problem.

Souler19 said:
Thank you for taking the time to address my concerns. The first thing i tried was to clear all apps, and even clear the phones ram in order to make sure no other apps were bothering it. The problem seems to be related to the package installer app. Clearing active apps and ram has not helped my issue.
---------- Post added at 06:21 PM ---------- Previous post was at 06:15 PM ----------
Problem solved, your information made me think enough to research elsewhere and find the problem. Turns out it was Echo Lockscreen app causing the problem.
Click to expand...
Click to collapse
To disable the draw ontop feature i used the "app opps" menu of my rom, Im using task650's rom, that allows you to disable parts of certain apps. in cm I believe its under the privacy section in settings.

Souler19 said:
Thank you for taking the time to address my concerns. The first thing i tried was to clear all apps, and even clear the phones ram in order to make sure no other apps were bothering it. The problem seems to be related to the package installer app. Clearing active apps and ram has not helped my issue.
---------- Post added at 06:21 PM ---------- Previous post was at 06:15 PM ----------
Problem solved, your information made me think enough to research elsewhere and find the problem. Turns out it was Echo Lockscreen app causing the problem.
Click to expand...
Click to collapse
To tell you the truth Xposed was the only installer I had issues with, I was able to install other apk's with out any issues.

[DeOdex+MODs] Samsung Galaxy Tab S2 T815 MM 6.0

De-Odexed De-KNOXed zip for T815​
Based on T815XXU2BPD6 firmware.
KNOX removed.
Stock system folder without color changes.
Upgrade your tab to Android 6.0 before flashing this zip!!!
No wipes required!!!The script will do everything for you!!!
M o d i f i c a t i o n s​
All modifications require installation of above mentioned DeOdexing zip.
SystemUI - Rounded notifications
- "CLEAR" button to Power Saving Notification
- Remove gray status bar when activated PowerSaveMode
- Networkspeed seperate in/out
- Remove Low Battery Warning Notification
- 3minit battery
- Quicklauncher in recents app
- Remove Unlock Help Text in Locskcreen
- MultiUserUI removed
Services.jar - Advanced Power Menu
- USB Plug/Unplug disable wake up
- Disable Signature Check
- Installing app older versions over newer
SecSettings2 - All system apps can be disabled in stock app manager
- Enable OutdoorMode
- Enable TouchKey light duration
framework.jar - transform the permanent(non-removable) notification to removable
- Bringing buttons "only once / always" to select when the task application "Open With."
- Multiwindow for all apps
All modifications are separated in different zip files to give you apportunity to choose what you need. If you going to use all of them just flash All in one zip.
Thread discontinued!​

Reserved for some more modifications...

hi
Working with SuperSU 2.74 but not worrking on systemless xposed. It gives me System UI has stopped. Pls fix ty.

It Works like u promise THX a lot
CX-11
Sent from my C6903 using XDA Premium HD app

No good a lot of force closings on a few application and no 3mitit battery no rownd corners some but not all knox stuff gone will be going back to 5.0.1 people if you are going to do something don't halfway do it but thank you anyway for the attempt............

Yay! I'll going on MM today. Thankyou ?

iStation said:
Working with SuperSU 2.74 but not worrking on systemless xposed. It gives me System UI has stopped. Pls fix ty.
Click to expand...
Click to collapse
Hi,thanks for your feedback.I am runing xposed by wanam on my tab and everything working good.Give some more info what is wrong.
stinka318 said:
No good a lot of force closings on a few application and no 3mitit battery no rownd corners some but not all knox stuff gone
Click to expand...
Click to collapse
Isn't it on the screenshot?
If not all knox removed pls advice what I missed.And explain what means
stinka318 said:
No good a lot of force closings on a few application
Click to expand...
Click to collapse

Thanks for the effort but it is no good, a lot of force closings on a few application. Looking forward your next version

Please for T715 ???

Awesome ... as always.
Thanks a lot.

CHE1 said:
Thanks for the effort but it is no good, a lot of force closings on a few application. Looking forward your next version
Click to expand...
Click to collapse
Please give more info.I don't have any force closings.I cann't help until I will know what are you talking about.What apps are force closing?

A few applications, messages, settings, ui etc, and so others, even trying to restart the tablet is hard because of the fc pop ups windows. I have the 815Y rooted I don't know if that makes the difference, I'm on 6.0.1 Let me know if you want me to take some screen shots
Sent from my SM-T815Y using Tapatalk
---------- Post added at 01:37 PM ---------- Previous post was at 01:36 PM ----------
I also have Xposed installed
Sent from my SM-T815Y using Tapatalk

CHE1 said:
A few applications, messages, settings, ui etc, and so others, even trying to restart the tablet is hard because of the fc pop ups windows. I have the 815Y rooted I don't know if that makes the difference, I'm on 6.0.1 Let me know if you want me to take some screen shots
Sent from my SM-T815Y using Tapatalk
---------- Post added at 01:37 PM ---------- Previous post was at 01:36 PM ----------
I also have Xposed installed
Sent from my SM-T815Y using Tapatalk
Click to expand...
Click to collapse
I also have have Xposed by wanam v.84 istalled and I don't have any of problems you have.The only difference is model-I have T815 and deodexing zip and mods were made on base of T815 firmware.You can try to make clean installation.Reflash your stock firmware and try to istall deodexing zip with mods.

I just have the stock firmware installed from 2 days ago. It worked perfectly fine when i was on 5.1.1 (only the email native application disappeared but i could live with that) I will reinstall everything from scratch because I really like the mods and I'll report back

I reinstalled everything from zero, Here are the errors. Unfortunately , google partner setup has stopped. Unfortunately the process android has stopped. Unfortunately messages has stopped.
The whole OS become unstable and irresponsive.

CHE1 said:
I reinstalled everything from zero, Here are the errors. Unfortunately , google partner setup has stopped. Unfortunately the process android has stopped. Unfortunately messages has stopped.
The whole OS become unstable and irresponsive.
Click to expand...
Click to collapse
Look,when FC starts?After installing of DeOdex or modifications?
Until now i don`t have any FCs.

zaleks13 said:
Look,when FC starts?After installing of DeOdex or modifications?
Until now i don`t have any FCs.
Click to expand...
Click to collapse
After installing deOdex

CHE1 said:
After installing deOdex
Click to expand...
Click to collapse
Then the problem is system files.DeOdex just replacing odexed system folders with deodexed with deleted KNOX,it does not make any other modifications to system files.
Before uploading all materials to GDrive I have tested them for some several days on my T815 and got no any issues.

Would this possibly work on the T817T?
Sent from my SM-T817T using XDA-Developers mobile app

First Google drive link for DeOdex and DeKnox only ? Right no other modifications
Sent from my SM-T815 using Tapatalk

battery drops fast

Hi all
Is this a battery problem or software ?
Im on dr kental rom

blackbravo said:
Hi all
Is this a battery problem or software ?
Im on dr kental rom
Click to expand...
Click to collapse
use khongloi kernel

Have u installed the latest firmware update for December ?
Actually December Firmware for my mobile is pushed by my operator only last week (On Feb 18). Post that am facing same issue. Battery is draining faster.
Usually overnight battery usage of this mobile will be only 2 - 3% but after the update it drains 15% even when idle. Am trying to check with the support

[email protected] said:
Have u installed the latest firmware update for December ?
Actually December Firmware for my mobile is pushed by my operator only last week (On Feb 18). Post that am facing same issue. Battery is draining faster.
Usually overnight battery usage of this mobile will be only 2 - 3% but after the update it drains 15% even when idle. Am trying to check with the support
Click to expand...
Click to collapse
Yes is the last one... But this is a complete fall of battery ...

Install kernel auditor and change governors to conservative or battery saver. And or shut some cores off/lower max frequency. If on nougat grab background restrictions app here on xda and kil apps that run when minimized or not opened. If you really want to go in depth grab xposed and install amplify and busybox and boot manager. You need root. If you don't have that I suggest magisk. I used to always go super user but the modules in magisk are very useful. In fact it can install xposed for you. Greenify may also help

godkingofcanada said:
Install kernel auditor and change governors to conservative or battery saver. And or shut some cores off/lower max frequency. If on nougat grab background restrictions app here on xda and kil apps that run when minimized or not opened. If you really want to go in depth grab xposed and install amplify and busybox and boot manager. You need root. If you don't have that I suggest magisk. I used to always go super user but the modules in magisk are very useful. In fact it can install xposed for you. Greenify may also help
Click to expand...
Click to collapse
i dont have conservative , just shows me userspace interactive or performance

godkingofcanada said:
Install kernel auditor and change governors to conservative or battery saver. And or shut some cores off/lower max frequency. If on nougat grab background restrictions app here on xda and kil apps that run when minimized or not opened. If you really want to go in depth grab xposed and install amplify and busybox and boot manager. You need root. If you don't have that I suggest magisk. I used to always go super user but the modules in magisk are very useful. In fact it can install xposed for you. Greenify may also help
Click to expand...
Click to collapse
i've also not rooted my device yet but really the latest update sucks. I don think any app is consuming batter because Samsung's Default Device Maintenance or Battery Usage will show such apps. I can see only Android default process is consuming more. Let me try Greenify else i may need to go for some custom roms..
Help me some custom rom with very good Battery Life with S-Pen features

Any patches for using (Ed)Xposed on Pie?

i'm using edxposed(0.4.3.2 alpha YAHFA variant) on my XZ2 with firmware 52.0.A.8.50, when it comes to xposed modules using resource hooks the system won't boot
something similar happens when doing the same thing on oreo firmwares but there was a xposedfix patch for oreo that can fix this (both for the original xposed and edxposed)
using the oreo patch for pie would also cause booting problems

asz_kt said:
i'm using edxposed(0.4.3.2 alpha YAHFA variant) on my XZ2 with firmware 52.0.A.8.50, when it comes to xposed modules using resource hooks the system won't boot
something similar happens when doing the same thing on oreo firmwares but there was a xposedfix patch for oreo that can fix this (both for the original xposed and edxposed)
using the oreo patch for pie would also cause booting problems
Click to expand...
Click to collapse
Which modules, for example?

levone1 said:
Which modules, for example?
Click to expand...
Click to collapse
in greenify, if the third box and the gcm thing is on（in xposed mode list), system wouldn't boot
another one is perfectcolorbar (i wonder if this module supports english)

asz_kt said:
in greenify, if the third box and the gcm thing is on（in xposed mode list), system wouldn't boot
another one is perfectcolorbar (i wonder if this module supports english)
Click to expand...
Click to collapse
I can confirm about PerfectColorBar. My guess is that it just needs to be updated.
Greenify seems OK to me so far, but I can't figure out what the 'third box and the gcm thing' is...
---------- Post added at 03:26 PM ---------- Previous post was at 03:21 PM ----------
asz_kt said:
in greenify, if the third box and the gcm thing is on（in xposed mode list), system wouldn't boot
another one is perfectcolorbar (i wonder if this module supports english)
Click to expand...
Click to collapse
Oh, I think I found it. I can't test gcm, though, because it says donation package required...

asz_kt said:
in greenify, if the third box and the gcm thing is on（in xposed mode list), system wouldn't boot
another one is perfectcolorbar (i wonder if this module supports english)
Click to expand...
Click to collapse
I found out from Perfectcolorbar thread that v.15.2 works. Just don't install the newest...

top magisk modules

Just rooted my Pixel 3a last night running Android Q Beta 6. What are some good magisk modules that I should install to make the Pixel 3a even better? Thanks

Active Edge Mod for Pixel Devices - allows you to customize the side sensor buttons. I have it set up to the default Google assistant except when the camera is open - then it takes a picture.
Viper4 AndroidFX - there are several versions available. They all use the same driver and have the same options. The difference is is only in the GUI.
Vanced Youtube - provides ad free Youtube experience.
Advanced Charging Controller (by VR25) - allows a user to customize how and when the phone is charged. It helps prolong the battery life.
Systemless Hosts - more of a Magisk setting, but it does install this module. Allows ad blocking through Adaway or similar ad blocking app.

sic0048 said:
Active Edge Mod for Pixel Devices - allows you to customize the side sensor buttons. I have it set up to the default Google assistant except when the camera is open - then it takes a picture.
Viper4 AndroidFX - there are several versions available. They all use the same driver and have the same options. The difference is is only in the GUI.
Vanced Youtube - provides ad free Youtube experience.
Advanced Charging Controller (by VR25) - allows a user to customize how and when the phone is charged. It helps prolong the battery life.
Systemless Hosts - more of a Magisk setting, but it does install this module. Allows ad blocking through Adaway or similar ad blocking app.
Click to expand...
Click to collapse
note that active edge mod isn't working for Q beta 6 yet, and i haven't been able to get viper working on Q yet, although ymmv i suppose.

c_tho said:
note that active edge mod isn't working for Q beta 6 yet, and i haven't been able to get viper working on Q yet, although ymmv i suppose.
Click to expand...
Click to collapse
Good call. After trying Beta 4 for a brief period of time, I went back to Pie so I'm out of the loop on what works and doesn't work with the beta.

sic0048 said:
Good call. After trying Beta 4 for a brief period of time, I went back to Pie so I'm out of the loop on what works and doesn't work with the beta.
Click to expand...
Click to collapse
the active edge guy is SUPER on the ball and posts updated versions in his telegram group if you're that way inclined. but yeah youtube vanced is my only functioning module right now. i'm sure most of them will be updated for Q in the coming months.

I'm a fan of energized pro for ad blocking, but you'll need the systemless hosts and BusyBox modules for it to work. These days I root my phone mainly for ad blocking.

for Vanced Youtube, is there a different module needed for it to work? I installed it in my Pixel 3a Rooted/Bootloader unlock, and the app was not even showing up

omiCar said:
for Vanced Youtube, is there a different module needed for it to work? I installed it in my Pixel 3a Rooted/Bootloader unlock, and the app was not even showing up
Click to expand...
Click to collapse
is disabled, if you have disabled normal youtube. enable it in settings

dark90_ said:
is disabled, if you have disabled normal youtube. enable it in settings
Click to expand...
Click to collapse
I figured it out, seems like I had to uninstall the Normal Youtube app, after I did that, I rebooted my phone and it worked

omiCar said:
I figured it out, seems like I had to uninstall the Normal Youtube app, after I did that, I rebooted my phone and it worked
Click to expand...
Click to collapse
I don't think you need to uninstall the actual Youtube app, but you do need to uninstall any "updates" for the Youtube app. I've found that after installing the Magisk module, I can go into the Playstore and pull up the Youtube app. There will be a "uninstall updates" button where the normal uninstall button would be. However you need to install the module first. Otherwise the button will uninstall the app instead of uninstalling the updates.
That's been my experience at least.....

Viper4 Android
Has anyone gotten Viper4 Android working on Android 10?

Yes. You have to install V4A FX v2.7.0.0 because v2.7.1.0 driver installation is broken on Q for now.

Pablito_097 said:
Yes. You have to install V4A FX v2.7.0.0 because v2.7.1.0 driver installation is broken on Q for now.
Click to expand...
Click to collapse
Do you happen to have it, all I can find is the 2.7.1.0 zip

kc6wke said:
Do you happen to have it, all I can find is the 2.7.1.0 zip
Click to expand...
Click to collapse
Here you have the APK. Install it and then the driver installation should install the magisk module.

I have the 2.7.1.0 version of Viper4Android installed and working just fine on Android 10. It was installed and working on Android 9 and it continued to work when I upgraded to Android 10. I sideloaded the .020 version of the Android 10 OTA image.
The Magisk module was last updated on May 31, 2019, so it obviously hasn't specifically been updated for Android 10. Perhaps it won't install on Android 10, but will work if upgraded from Android 9. I also have the Audio Modification Library module and the Audio Compatibility Patch module installed as well. Perhaps that makes a difference?????

Pablito_097 said:
Here you have the APK. Install it and then the driver installation should install the magisk module.
Click to expand...
Click to collapse
Doesn't work unfortunately.

Viper4Android settings
Can anyone share your best-sound settings for viper4adnroid? Bluetooth profile especially

eightace said:
Doesn't work unfortunately.
Click to expand...
Click to collapse
Apologies it does

Pablito_097 said:
Yes. You have to install V4A FX v2.7.0.0 because v2.7.1.0 driver installation is broken on Q for now.
Click to expand...
Click to collapse
I'm using V4A 2.7.1.0 on Q and it's working fine. I had to flash Ainur, Audio Modification Library and Audio Compatibility Patch to get it work though!
---------- Post added at 06:18 PM ---------- Previous post was at 06:12 PM ----------
i root SGH i777 said:
Just rooted my Pixel 3a last night running Android Q Beta 6. What are some good magisk modules that I should install to make the Pixel 3a even better? Thanks
Click to expand...
Click to collapse
Open Magisk, go into settings, scroll down and click on Systemless Hosts, reboot, then install Adaway. Boom! system wide adblocking.
adaway.org
YouTube vanced is a must, too.

Y'all seem to have forgotten QuickSwitch ??
Sent from my Google Pixel 3a XL using XDA Labs