[Guide] Nougat from scratch - Huawei P9 Lite Guides, News, & Discussion

I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE, USE AT YOUR OWN RISK​
I struggled to find all pieces of information needed so i am making this guide if anybody in future needs to fix bricks or just get back to stock rom, you can also debrand your phone if you use different oeminfo
Firmware for VNS-L21C432
B160 B370 DS OEMInfo
B161 B371 SS OEMInfo
Click to expand...
Click to collapse
Flash correct oeminfo using TWRP
Download B160 or B161 using FF (PC)
Put UPDATE.APP from update.zip in folder 'dload' in root of the sdcard
Turn the phone on while holding both volume keys, hold until huawei logo dissapears
Wait for installation to finish
Install B370 or B371 using FF proxy
Enjoy
NOTES​
Odd numbered updates are for single-sim, even numbered ones are for dual sim
FullOTA-MF-PV updates must be used when upgrading to nougat from marshmellow, otherwise half apps will be missing
FF (Android) can be installed without play store by using Yalp store
Upgrading from B160/161 to B370/371 and further using dload method did not seem to work for me
B160/161 firmware can be downloaded using FF (Android) application too in case computer isn't available
Click to expand...
Click to collapse

Using this method gave me bootloops. If anyone else gets them, what I did was:
1)Wait for installation to finish
2)Turn the phone off completely
3)Hold VolUp+Power and release on Huawei logo
4)Factory reset in the menu that appears
5)Reboot
And no more bootloops!

Related

P9 eva-l19 (dual sim) and nougat update problems

I have tried several ways to install nougat to Huawei P9 dual sim, but it's almost impossible.
First i tried to install beta version, and it works ok but some apps are missing and keyboard is missing as well, it installs only google voice as a keyboard, so I restored it with Huawei rollback package.
Second, I tried debranding it so I can install some other version but I have similar issues. Here are my steps:
1. unlock bootloader
2. twrp recovery
3. root
4. change oem info and custom.bin, and this is where the problem starts.
After step number 4 the phone restarts and the letters during initial startup are red like system had been modified and after it goes to the part where it says "type password to decrypt storage". When I do that, it accepts the password (google) and says the phone storage is corrupted and I have to reset it, and then it resets the phone to default settings. After that I don't have root and no custom recovery. I tried this procedure several times and it's always the same. After the reset procedure, it installs some initial version (C900B136).
I finally gave up on that, and tried to get back to L19C432B161 but I have issues as well. First I had to restore my oem info and custom.bin so it accepts the C432 version, but after install some apps are gone and the theme manager is not working (it won't change icons or the wallpapers).
I tried using HiSuite to restore it back to stock but it won't accept the L19 version (only L09 and L29).
The tool I was using is SRK Tool Huawei 2.0, and I tried to follow procedure as described here on xda.
Any clues what I do wrong?
elvirr said:
I have tried several ways to install nougat to Huawei P9 dual sim, but it's almost impossible.
First i tried to install beta version, and it works ok but some apps are missing and keyboard is missing as well, it installs only google voice as a keyboard, so I restored it with Huawei rollback package.
Second, I tried debranding it so I can install some other version but I have similar issues. Here are my steps:
1. unlock bootloader
2. twrp recovery
3. root
4. change oem info and custom.bin, and this is where the problem starts.
After step number 4 the phone restarts and the letters during initial startup are red like system had been modified and after it goes to the part where it says "type password to decrypt storage". When I do that, it accepts the password (google) and says the phone storage is corrupted and I have to reset it, and then it resets the phone to default settings. After that I don't have root and no custom recovery. I tried this procedure several times and it's always the same. After the reset procedure, it installs some initial version (C900B136).
I finally gave up on that, and tried to get back to L19C432B161 but I have issues as well. First I had to restore my oem info and custom.bin so it accepts the C432 version, but after install some apps are gone and the theme manager is not working (it won't change icons or the wallpapers).
I tried using HiSuite to restore it back to stock but it won't accept the L19 version (only L09 and L29).
The tool I was using is SRK Tool Huawei 2.0, and I tried to follow procedure as described here on xda.
Any clues what I do wrong?
Click to expand...
Click to collapse
i had a similar issue where i was unable to flash any particular firmware, finally had my phone taken to the service center and they replaced the motherboard (twice)..
umair9001 said:
i had a similar issue where i was unable to flash any particular firmware, finally had my phone taken to the service center and they replaced the motherboard (twice)..
Click to expand...
Click to collapse
Well during this process I run into a bootloop and no recovery, so I unlock the bootloader, flash the stock recovery and then install stock firmware.
My phone is working now but it's not complete, some things are missing and not working properly so I am waiting some instructions what to do next. I really like Huawei phones but this firmware thing is a nightmare
elvirr said:
I have tried several ways to install nougat to Huawei P9 dual sim, but it's almost impossible.
First i tried to install beta version, and it works ok but some apps are missing and keyboard is missing as well, it installs only google voice as a keyboard, so I restored it with Huawei rollback package.
Second, I tried debranding it so I can install some other version but I have similar issues. Here are my steps:
1. unlock bootloader
2. twrp recovery
3. root
4. change oem info and custom.bin, and this is where the problem starts.
After step number 4 the phone restarts and the letters during initial startup are red like system had been modified and after it goes to the part where it says "type password to decrypt storage". When I do that, it accepts the password (google) and says the phone storage is corrupted and I have to reset it, and then it resets the phone to default settings. After that I don't have root and no custom recovery. I tried this procedure several times and it's always the same. After the reset procedure, it installs some initial version (C900B136).
I finally gave up on that, and tried to get back to L19C432B161 but I have issues as well. First I had to restore my oem info and custom.bin so it accepts the C432 version, but after install some apps are gone and the theme manager is not working (it won't change icons or the wallpapers).
I tried using HiSuite to restore it back to stock but it won't accept the L19 version (only L09 and L29).
The tool I was using is SRK Tool Huawei 2.0, and I tried to follow procedure as described here on xda.
Any clues what I do wrong?
Click to expand...
Click to collapse
Before you debrand, download the ROM of the cust you want to debrand to, place in dload folder on your sdcard. After step 4, your device will reset to factory, use sdcard ROM upload method and you will succesfully debrand your device. After that, if you debrand to L19C636B190 (for example), it will be OTA to L19C636B361.
My Al-10 was debranded and OTA successfully to L19C636B361 using this method.
elvirr said:
Well during this process I run into a bootloop and no recovery, so I unlock the bootloader, flash the stock recovery and then install stock firmware.
My phone is working now but it's not complete, some things are missing and not working properly so I am waiting some instructions what to do next. I really like Huawei phones but this firmware thing is a nightmare
Click to expand...
Click to collapse
Totally agree, once you are on nougat it really becomes hard to flash the firmware..till marshmallow, it was easier to control and flash the firmware..
swedenboy said:
Before you debrand, download the ROM of the cust you want to debrand to, place in dload folder on your sdcard. After step 4, your device will reset to factory, use sdcard ROM upload method and you will succesfully debrand your device. After that, if you debrand to L19C636B190 (for example), it will be OTA to L19C636B361.
My Al-10 was debranded and OTA successfully to L19C636B361 using this method.
Click to expand...
Click to collapse
Well this was the missing part
After i copied the L19C636B190 rom to dload folder on sd card it was successful.
Then I just connected it to HiSuite and it found the nougate update.
Thank you!
Hi Guys,
Any links available for download??
My device is P9 DUAL SIM(EVA-L19)
Thnx
mohammad.nomaan said:
Hi Guys,
Any links available for download??
My device is P9 DUAL SIM(EVA-L19)
Thnx
Click to expand...
Click to collapse
Did you find the links for L-19? I need B136 for a rollback
I got the OTA last Friday so didn't do anything else
It's now on 7.0 EMUI
Sent from my SM-N920C using Tapatalk
mohammad.nomaan said:
I got the OTA last Friday so didn't do anything else
It's now on 7.0 EMUI
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Damn I need to rollback mine just to reroot it :crying:
swedenboy said:
Before you debrand, download the ROM of the cust you want to debrand to, place in dload folder on your sdcard. After step 4, your device will reset to factory, use sdcard ROM upload method and you will succesfully debrand your device. After that, if you debrand to L19C636B190 (for example), it will be OTA to L19C636B361.
My Al-10 was debranded and OTA successfully to L19C636B361 using this method.
Click to expand...
Click to collapse
How did you get the OTA? I got it right after dload B190 (which I didn't update it yet) then I didn't have it anymore 5 mins later
UPDATE: Somehow got the OTA when my dload update to B361 failed

What is going on with Huawei and software updates?

I have a SIM free UK P9. Early on in its life it received updates happily but I have still not received Nougat and I'm still on the September 2016 Security Patch from Google. I've never rooted or tampered with the device, so where are my updates? Are Huawei simply too busy with other phones to bother updating flagships from only last year?
It is unacceptable to me that a £450 device from a manufacturer purportedly looking to compete with the big guns in the premium phone space cannot be bothered to keep its older handsets up to date. How is a user supposed to put his trust in a company when they seem to forget about their older devices once newer ones are released onto the market?
Meanwhile a friend of mine with a SIM free Samsung Galaxy Note 4 (!) has June's security patches.
Small wonder people don't take Huawei seriously. This P9 is a lovely device with great battery life and is still (for my usage) an excellent handset; however I will not be buying another Huawei until I am confident that they are willing to maintain support for older devices. So far it seems that some people in different parts of the world on various carriers *do* get updates (or at least have more recent ones) but Huawei seem incapable of rolling them out consistently and across the board.
Disappointing.
Anyone else have any thoughts on this? I don't wish to put Huawei down too much as I think they bring some interesting things to the market but one of my biggest bugbears is where manufacturers forget that after-sales support and updates are some of the things that contribute to people's perception of a company. Might as well just buy Doogees and Vernees off Banggood without it.
Don't wait huawei to send update,use firmware finder from play store,or dload method,or hisuite method,all these methods are officially safe and keep your warranty. What your build number ?
Build number is EVA-L09C432B182.
I'm not really into flashing ROMs these days as i don't want to mess anything up. I don't want to flash firmware that isn't UK SIM free either, and if I haven't had that update OTA then I assume it simply hasn't been released.
I don't have a PC anyway as I sold my Surface Pro and now only have a MacBook.
Use firmware finder from play store,and firmware finder proxy,it is the easy way,only search for the rom u want and let your system update search for update by using proxy,if from MM to nougat u will not loose anything.
You'd have to guide me through that step by step as to be honest I don't entirely understand anything other than the bit about using something from the Play Store
OK so I worked this out. The only firmware it says is approved for my device is the next up on the list - EVAL09C432B330-LOG.
This downloads fine through the stock Huawei update menu (as if i am just doing a normal update) and the phone reboots but then the installation fails, whether I choose the full package or standard update option.
leoni1980 said:
OK so I worked this out. The only firmware it says is approved for my device is the next up on the list - EVAL09C432B330-LOG.
This downloads fine through the stock Huawei update menu (as if i am just doing a normal update) and the phone reboots but then the installation fails, whether I choose the full package or standard update option.
Click to expand...
Click to collapse
do you have a way to get the files from firmware finder onto your SD card? If so create a folder called DLOAD on the root directory and then put the update file in that folder. Power off the phone and hold all three buttons (power and vol+/-) until you get the firmware updating screen.
Let me know if it still fails.
Thanks. Will doing this cause any mismatches in future and stop me being able to receive OTA updates, or affect Android Pay?
I have put the update.zip in a folder called dload in the root of the SD but neither the boot method of installation nor the dialler method seems to find it. I've tried with a different update.zip with the same result
leoni1980 said:
I have put the update.zip in a folder called dload in the root of the SD but neither the boot method of installation nor the dialler method seems to find it. I've tried with a different update.zip with the same result
Click to expand...
Click to collapse
Who told u that??, incorrect my friend,extract the update.zip and put only update.app inside dlod folder in the root of your sd card,it is explain hunderds of time everywhere
Hi, this isn't all that clear in the other instructions I've read, and historically flashing update.zip from the root of an SD card is quite a typical way to flash software, so you can understand the confusion!
Are you sure this will work? Other threads online indicate that flashing is much more difficult than this and requires unlocking the bootloader. Am I missing something here?
I also tried this but failed on my phone. I put the update.app in the dload folder but always fails after about 14%
leoni1980 said:
Hi, this isn't all that clear in the other instructions I've read, and historically flashing update.zip from the root of an SD card is quite a typical way to flash software, so you can understand the confusion!
Are you sure this will work? Other threads online indicate that flashing is much more difficult than this and requires unlocking the bootloader. Am I missing something here?
Click to expand...
Click to collapse
after you download the zip file and then unzip it. Put thr UPDATE.APP in the dload folder on your internal memory. and then perform the update.
sprouts4all said:
I also tried this but failed on my phone. I put the update.app in the dload folder but always fails after about 14%
Click to expand...
Click to collapse
try redownloading the file.
sprouts4all said:
I also tried this but failed on my phone. I put the update.app in the dload folder but always fails after about 14%
Click to expand...
Click to collapse
Just to let you know, after downloading a bazillion files and trying every method under the sun I finally got this to work. It is now running B386 firmware.
Using the manual update method didn't work for me; the steps I had to follow are as follows:
With Firmware Finder, choose the B386 full OTA package - check for compatibility first (it said mine was compatible with it) and choose to install via proxy. Set up your WiFi to run the localhost/8080 proxy settings as instructed by FF. While the file is downloading, remove the proxy settings from your WiFi, allow it to reconnect and continue the download.
I then just left the phone to its own thing. I was actually watching a video in the background when it rebooted itself and began the installation process, which didn't fail as I expected it to.
Everything seems to be running fine now.
Thanks to the person in this thread who suggested using Firmware Finder.
leoni1980 said:
Just to let you know, after downloading a bazillion files and trying every method under the sun I finally got this to work. It is now running B386 firmware.
Using the manual update method didn't work for me; the steps I had to follow are as follows:
With Firmware Finder, choose the B386 full OTA package - check for compatibility first (it said mine was compatible with it) and choose to install via proxy. Set up your WiFi to run the localhost/8080 proxy settings as instructed by FF. While the file is downloading, remove the proxy settings from your WiFi, allow it to reconnect and continue the download.
I then just left the phone to its own thing. I was actually watching a video in the background when it rebooted itself and began the installation process, which didn't fail as I expected it to.
Everything seems to be running fine now.
Thanks to the person in this thread who suggested using Firmware Finder.
Click to expand...
Click to collapse
What firmware was you on before. I have tried this method with other versions but no luck. I will try with the B386.
sprouts4all said:
What firmware was you on before. I have tried this method with other versions but no luck. I will try with the B386.
Click to expand...
Click to collapse
I was on B182. If you're on the exact same firmware as me then try the steps above exactly and you might have more luck. I also deleted all old downloaded update files before I commenced with it.
Thanks
leoni1980 said:
I was on B182. If you're on the exact same firmware as me then try the steps above exactly and you might have more luck. I also deleted all old downloaded update files before I commenced with it.
Thanks
Click to expand...
Click to collapse
Still didnt work, went to install but failed. Says incompatible firmware
Follow these like i just did
https://forum.xda-developers.com/showpost.php?p=70594380&postcount=2)
mazsuper said:
Follow these like i just did
https://forum.xda-developers.com/showpost.php?p=70594380&postcount=2)
Click to expand...
Click to collapse
Didn't work, managed to get to B360 but now Huawei apps are missing including camera
goto b300 then b182 then follow above instructions , and rtfm
skip 361 and goto 378 via hisuite update

Huawei p9 problem

Hi all. I have huawei p9 eva l19 and after rollback to mm any theme won`t apply. I have eva l19c432b182 and everything works fine but just theme won`t, it says applied but nothing. I have old emui icons for stock apps like camera, gallery...
I have locked bootloader and nonrooted device, stock recovery too.
Can anyone help me?
Install b182 again by DLOAD and then 'dial'
*#*#2846579#*#* and apply Hard Reset
zgfg said:
Install b182 again by DLOAD and then 'dial'
*#*#2846579#*#* and apply Hard Reset
Click to expand...
Click to collapse
Thank you for answer. When i flashed b182 update(dload method) after that phone did factory reset, and after that power on.
Do i need to factory reset again? When i installed b182 in my folder dload was only update.app(3.22gb), do i need to have other files in dload folder or just update.app? i missing stock apps like compass, mirror... Maybe i need to flash some data files but i don`t know how without root or bootloader, and i would like to not root my device. What to do?
Here is an excellent guide for Rollback, I followed two times and everything worked perfect. However, skip 7-8 there is no such package and for 9 you should receive OTAs b383, b386 and b393 (some also get b393)
https://forum.xda-developers.com/p9...-81-emui-5-t3612258/post73131443#post73131443
zgfg said:
Here is an excellent guide for Rollback, I followed two times and everything worked perfect. However, skip 7-8 there is no such package and for 9 you should receive OTAs b383, b386 and b393 (some also get b393)
https://forum.xda-developers.com/p9...-81-emui-5-t3612258/post73131443#post73131443
Click to expand...
Click to collapse
Hmm i followed just like that and i have update now to b383 but i won`t bcs i wanted mm. Weird, i found on forum that i need to flash hw_init with srk tool if i miss themes but that need a root. Hw_init is file from update_data_full_hw_eu(Step 7-8) but i don`t know how to flash it in dload bcs there have only files in zip not update.app.I think i can`t flash zip file in dload. I searched that zip (hw_eu) and i found hw_init file and also my missing apps like compass. How to flash this zip without root?
Kovacc56 said:
Hmm i followed just like that and i have update now to b383 but i won`t bcs i wanted mm. Weird, i found on forum that i need to flash hw_init with srk tool if i miss themes but that need a root. Hw_init is file from update_data_full_hw_eu(Step 7-8) but i don`t know how to flash it in dload bcs there have only files in zip not update.app.I think i can`t flash zip file in dload. I searched that zip (hw_eu) and i found hw_init file and also my missing apps like compass. How to flash this zip without root?
Click to expand...
Click to collapse
I didn't stay in b182 but I think no apps were missing
Anyway, you can follow but for b182 package
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
zgfg said:
I didn't stay in b182 but I think no apps were missing
Anyway, you can follow but for b182 package
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
Click to expand...
Click to collapse
Ye i remember i followed that instructions, first is for stock recovery and i have it and second is for stock firmware, i downloaded that l19 b182 from that link in his guide. I think i will have themes when i update my phone to b383, i have update in `about phone` but i like mm more... But don`t know how to solve my problem now with mm... Maybe u missed that apps too but u didn`t notice it, rly don`t know. Do anyone else know what do do?

Bootloop on pra_lx1 p8 lite 2017 oreo twrp and hurupdater issue

Hello everyone.
Last night i am tried to update my EMUI 5.0.2 Pra-lx1 p8 lite 2017 phone to the Oreo update 8.0.0.322 downloaded from Team TMs' huawei firmware finder.
My phone is allready "Bootloader unlocked" and "FRP unlocked" there is no problem. I can reach to TWRP( there is a huge problem i will explain it).
on the top of my way i got EMUI 5.0.2 and i unlocked the bootloader and FRP.
then i installed the EliteTWRP-3.2.1.
after this i downloaded
HuRUpdater 0_3.zip
and the 3 neccesery FullOTA-MV-OP files that includes the
update.zip
update_data_full_public.zip
update_full_PRA-L11_hw_eu.zip
then i do everything exatly on this thread
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
and voilla!!! i got the Oreo update installed.
BUT....
i dont get the file manager app its lost!
i can not get themes or get in any of huawei apps sign in or get in!
so for this. my next step is goint to do reflash the oreo how i did it again.
BUT....
i can not do this because the instaled TWRP does NOT support OREO. Applause for this
so i'am tried 3 different TWRP that can be used on HUAWEI phones.
First one is this i dont know who is the developer but ists intercafe is chinese or korean.
https://drive.google.com/file/d/1rlQPRP234PoXY_yqup3oK_joOZGSIker/view
i tried to instal this over adb fastboot. BUT I can NOT. Because Oreo will do this on RAMDISK_RECOVERY!!!! WOOOWWWW
i did this and i reinstaled the oreo update like i did it first but in this new TWRP.
İt flashed my OREO but on the bootlogo the HUAWEI opening sound curropted before finished the sound and gets to restart.
after restart eRecovery opens and give me TWO funcional choises!!! Like Jig SAW
anyway...
the first option is DOWNLOAD LATEST VERSION AND RECOVERY
BUT for my chanse!!!! or mean bad LUCK!!! eRecovery WiFi doesnt see the EDUROAMs ACCESS POINTS WELL RIGHT!!!!
so i passed the first one and we are on the MAGICAL point.
the second option is the WIPE DATA/FACTORY RESET
on this time i CAN NOT DO THIS BECAUSE THE ORGININAL RECOVERY PART IS GONE!!!! YEAP I CAN NOT DO FACTORY RESET.
WHEN i choose this option it will go to the TWRP recovery nice huh!? NO.
so what will i do i know my phone is not BRICKED YET! İF THERE İS TWRP THERE İS HOPE!
BUT I DO NOT KNOW WHAT SHOULD I DO RIGHT KNOW
please help me....
with this Recovery (TWRP)( not usefull beacuse you can not use them )
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/recovery-recoveryoreonocheck-install-t3777974
i found this under a members signature and i give a try but it wont work this gives me just a big error
But this error gets my phone a factory reset after than i flashed this Recovery (better then the chinesee korean languges type one ;D )
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/unofficial-twrp-3-2-1-0-oreo-t3773970
and i tried to flash the Oreo update again with HuRUpdater_0_3.zip
but now I am at the begining. System works there is no issue over hardware.
But there is missing system apps like File Manager. Themes and so on....
And the best thing is The BUILD NUMBER is 8.0.0.046(08TO)
BUT I flashed the f*ckn' 8.0.0.322!!!!! WHY GOD!!!! WHY!!!!
Could anybody iluminte about what the hell is going on right now please i need to know why is why
Dude you need to rename the files before you put them in the folder
HuRUpdater 0_3.zip --> just delete the number (HuRUpdater.zip)
update_data_full_public.zip --> update_data_public.zip
update_full_PRA-L11_hw_eu.zip --> update_all_hw.zip
marstonpear said:
Dude you need to rename the files before you put them in the folder
HuRUpdater 0_3.zip --> just delete the number (HuRUpdater.zip)
update_data_full_public.zip --> update_data_public.zip
update_full_PRA-L11_hw_eu.zip --> update_all_hw.zip
Click to expand...
Click to collapse
thanks for your response. but i mention it i did it everything right. i do not think that only delete 3 piece of character get back the File manager or themes or huawei applications .
z1rqdym said:
thanks for your response. but i mention it i did it everything right. i do not think that only delete 3 piece of character get back the File manager or themes or huawei applications .
Click to expand...
Click to collapse
It would, main issue is that HuRUpdater is made for many Huawei phones not just for prague, when you flash the HuRUpdater.zip it can only flash the update.zip because you don't need to rename it. It doesn't flash the other zips because they're not named correctly, hence the updater can't find the zips to flash.
marstonpear said:
It would, main issue is that HuRUpdater is made for many Huawei phones not just for prague, when you flash the HuRUpdater.zip it can only flash the update.zip because you don't need to rename it. It doesn't flash the other zips because they're not named correctly, hence the updater can't find the zips to flash.
Click to expand...
Click to collapse
there is a misunderstood i allready rename the 3 update files. i used two times the nocheck recovery method and works well but the issue is the same. i only dont rename the hurupdater file. i will give a try now.
Let me know if it works, if that doesn't work for you too I can't help you but I just uploaded the stock oreo erecovery to GDrive and you can download it and flash it to recovery_ramdisk partition (because you are on Oreo) then make a factory reset or go back to nougat https://drive.google.com/open?id=157C0CI5CqSEzvQRB7Yt5K1WPtYBcaO08
EDIT: I didn't read it right sorry that you can't connect to wifi. Try wiping data-cache-dalvik-system on TWRP and then flashing the HuRUpdater.zip
You may also have a bad download, I mean one of the zip files you have may be corrupted
marstonpear said:
Let me know if it works, if that doesn't work for you too I can't help you but I just uploaded the stock oreo erecovery to GDrive and you can download it and flash it to recovery_ramdisk partition (because you are on Oreo) then make a factory reset or go back to nougat https://drive.google.com/open?id=157C0CI5CqSEzvQRB7Yt5K1WPtYBcaO08
EDIT: I didn't read it right sorry that you can't connect to wifi. Try wiping data-cache-dalvik-system on TWRP and then flashing the HuRUpdater.zip
You may also have a bad download, I mean one of the zip files you have may be corrupted
Click to expand...
Click to collapse
same result i did it just you are said. it flashed oreo and it booted and works. But there is no File manager can not use themes. Build number is 8.0.0.046(08TO). I can make call connect to internet over LTE / 3G / EDGE.
is this issue are from that my phone is from another region instead from europe? İ downloaded the PRA-LX1C432B322-(8.0.0.322) from Team MT FirmwareFinder over Huawei host servers three times. even i download the stock nougat rom in the same way. I flashed the nougat but this time build number is NRD-testkeys . same issue file manager themes not appear or work.
z1rqdym said:
same result i did it just you are said. it flashed oreo and it booted and works. But there is no File manager can not use themes. Build number is 8.0.0.046(08TO). I can make call connect to internet over LTE / 3G / EDGE.
is this issue are from that my phone is from another region instead from europe? İ downloaded the PRA-LX1C432B322-(8.0.0.322) from Team MT FirmwareFinder over Huawei host servers three times. even i download the stock nougat rom in the same way. I flashed the nougat but this time build number is NRD-testkeys . same issue file manager themes not appear or work.
Click to expand...
Click to collapse
If you get that build number issue on nougat it might be about your oeminfo partition. Try flashing PRA-LX1C432 oeminfo on this thread : https://forum.xda-developers.com/8-lite/how-to/share-oeminfo-t3740734
Beware, it locks your bootloader, so unlock it after you flash the file. Then start erecovery and download the nougat firmware to get your device ready for Oreo, then flash the HuRUpdater.zip . I hope this works!
marstonpear said:
If you get that build number issue on nougat it might be about your oeminfo partition. Try flashing PRA-LX1C432 oeminfo on this thread : https://forum.xda-developers.com/8-lite/how-to/share-oeminfo-t3740734
Beware, it locks your bootloader, so unlock it after you flash the file. Then start erecovery and download the nougat firmware to get your device ready for Oreo, then flash the HuRUpdater.zip . I hope this works!
Click to expand...
Click to collapse
is this rebranding changes my device IMEI adress? if it is so my unlock code do not work?
z1rqdym said:
is this rebranding changes my device IMEI adress? if it is so my unlock code do not work?
Click to expand...
Click to collapse
I don't think it changes the IMEI. I had a pra-lx1c464(Turkey) and I rebranded it to c432 I had no issues with it. It will change your device to Dual-SIM though if you have a single SIM device, which has no effect at all. I can still use my bootloader unlock code, and I have used it many time again and again after rebranding the device. Also you're trying to install PRA-LX1C432B322 Oreo right? Your device should be branded as PRA-LX1C432 first
is it neccesery to download the nougat rom from eRecovery over wifi?
z1rqdym said:
is it neccesery to download the nougat rom from eRecovery over wifi?
Click to expand...
Click to collapse
I'm not sure but it is necessary to have it branded as PRA-LX1C432
I will give a try flash the oeminfo c432 then try to flash nougat with nocheck image.
nope nothing works... I flashed the oem info from the link that you givin here. but the oeminfo doesnt change the Build number but the device changed to honor 8 lite chinese normal version on nougat. After flashed the oreo the build number dont changed and the themes not working file manager also not excist.
Factory reset
z1rqdym said:
nope nothing works... I flashed the oem info from the link that you givin here. but the oeminfo doesnt change the Build number but the device changed to honor 8 lite chinese normal version on nougat. After flashed the oreo the build number dont changed and the themes not working file manager also not excist.
Click to expand...
Click to collapse
Have you tried to reset the phone to its factory defaults . In this way I fixed missing apps problem .
I tried factory reset over Recovery bu it doesnt changed any thing. Then i tried the factory reset from the settings of the rom. Same result.
I just installed it manually. I have the 8.0.0.46 (08TO) but I don't have any issue, I have apps and themes..is it correct the version not should I expecting something different?
Please let me know
Same build number as in my settings. Themes wont work because regional issues. When i change phones language to english themes apps works well. Thats the themes app i admit it but.. in the other hand i dont get the in games(i dont remember the original name of it) app comes with oreo. I dont have the huawei login future anymore i think this is because of the unlocked bootloader not tried to look again then do a factory reset. I can not rebrand my phone. I know because when i flash europen oeminfo or not if i install the stock emui 5.0.3 again it says no build number against test keys . On the other side i can use my phone well i dont have any problem. And i forgot to say i dont even the file manager i installed the hidisk apk that i found on internet.
My advise is dont do this to your phones wait for a official update. But for us this is a long hard road

Rebranded EVA-AL10 to EVA-L19C432....

Rebranded EVA-AL10 to EVA-L19C432....
Anybody find a way to flash update higher then 386?I am unable to update to 398(or any higher then 386)...
So, I tired:
1. flashed EVA-L19 partition table (DCUNLOCKER Phenix ), EVA-L19C432B360, got OTA to 378 then then to 386
futher updates possible but only manually. However, there a big problem - long delay placing calls and miss some incoming calls
2. flashed EVA-AL10 partition table(same tool), EVA-L19C432B360, got OTA to 383, then to 386
no futher updates possible - ota, sd or FF DNS, or FF Proxy.
3. Keep EVA-AL10 partition table, dowgraded to MM EVA-L19C432B182, then got OTA 383, then OTA 386..
no futher updates possible - ota, sd or FF DNS, or FF Proxy.
Seems to be problem with partition table. Does anybody overcome this issue. Does anybody have partition table for EVA-L29C636?(dgtks file)
gkirko said:
Rebranded EVA-AL10 to EVA-L19C432....
Anybody find a way to flash update higher then 386?I am unable to update to 398(or any higher then 386)...
So, I tired:
1. flashed EVA-L19 partition table (DCUNLOCKER Phenix ), EVA-L19C432B360, got OTA to 378 then then to 386
futher updates possible but only manually. However, there a big problem - long delay placing calls and miss some incoming calls
2. flashed EVA-AL10 partition table(same tool), EVA-L19C432B360, got OTA to 383, then to 386
no futher updates possible - ota, sd or FF DNS, or FF Proxy.
3. Keep EVA-AL10 partition table, dowgraded to MM EVA-L19C432B182, then got OTA 383, then OTA 386..
no futher updates possible - ota, sd or FF DNS, or FF Proxy.
Seems to be problem with partition table. Does anybody overcome this issue. Does anybody have partition table for EVA-L29C636?(dgtks file)
Click to expand...
Click to collapse
Ifnproperly rebranded and not affected by your later flashing, HWOTA will work
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
zgfg said:
Ifnproperly rebranded and not affected by your later flashing, HWOTA will work
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Click to expand...
Click to collapse
Can you please elabiorate.... You suggesting that i have I have issue with recovery? and to re-flash recovery partition from L19 will work?
JUst one question - if there are issue with my recovery then why i have no problem to install firmware up to v 386?
and if i uninstall updates for SYstem Updater, I can download new update and verify it but when phone reboots I got to 5% and then it said install failed(without any explanation).
gkirko said:
Can you please elabiorate.... You suggesting that i have I have issue with recovery? and to re-flash recovery partition from L19 will work?
JUst one question - if there are issue with my recovery then why i have no problem to install firmware up to v 386?
and if i uninstall updates for SYstem Updater, I can download new update and verify it but when phone reboots I got to 5% and then it said install failed(without any explanation).
Click to expand...
Click to collapse
Not sure what is the latest OTA update for L19, but definitely lower number than L09.
And saying that HWOTA method is proven for upgrading to approved or even unapproved builds (O've used it several times myself too)
And one more - you can flash by the 'old' DLOAD method only FulOTA-MF-PV releases, but for the last 6-7 months there were no more PV builds, hence DLOAD method doesn't work for new releases
PS: New thread on (new) HWOTA7 for rebranding, upgrading, rolling back to stock, etc
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849

Categories

Resources