ok so, i have a straight talk s10 and i want to install verizon software on it. i have already tried using odin but, it still comes back as a straight talk software. i am getting no errors on odin and it says it successfully passed. what am i doing wrong??
You have to first flash SM-N975U1 (US unlocked) firmware first onto the device and then you can flash the U branded software you want. When you want to switch carrier firmware you must flash U1 firmware first.
Related
Hi I'm trying to flash the T-Mobile firmware from sammobile.com, but whenever I try, I get an error at 32% when it says Installing System Update. I attempted to flash CSC,AP,BL, and CP with it saying PASS in Odin. I really need the T-Mobile firmware and am wondering if it is possible to do? I determined that I cant install CSC files and get the error when I try. Any Solutions?
SM-G950U
Odin 3.12.3
T-Mobile Firmware:
PDA: G950USQU1AQD9
CSC: G950UOYN1AQD9
I'm having the same problem with an ATT phone flash with the US "U" unlocked version firmware. When I don't flash the csc it will start up only with the USB plug in but shut down after the beginning startup
Search for a "modified Odin". It was what I used to be able to flash unlocked firmware on a 7 and 7 edge a few months ago. The "normal" Odin wouldn't let me do it, but the modified one did. Though you may need to wait until it's been updated....I haven't checked it in awhile.
Still no solution to avoid the error to 32%?
Try this Odin. This is the one I used to flash the Canadian firmware on mine.
I managed with odin version 3.12.5! But only with BL AP and CP!
When I add CSC I get the error at 32%!
So a priori everything works, I no longer have the Verizon overlay (nor the logo at startup) more by cons I have duplicates in the settings menu ...
What is the CSC file?
bsharp8 said:
Try this Odin. This is the one I used to flash the Canadian firmware on mine.
Click to expand...
Click to collapse
The Canadian firmware you got it or? On sammobile I find it not:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/
The Canadian firmware is stock or operator?
I would have access to all the bands?
Its the firmware with the "w" at the end. Please read this thread for all the information on doing this and make sure you want to do it.
https://forum.xda-developers.com/galaxy-s8/how-to/rd-carrier-switch-root-snapdragon-t3597473
bsharp8 said:
Its the firmware with the "w" at the end. Please read this thread for all the information on doing this and make sure you want to do it.
https://forum.xda-developers.com/galaxy-s8/how-to/rd-carrier-switch-root-snapdragon-t3597473
Click to expand...
Click to collapse
so to do this we actually have to go to the canadian firmware first, do the csc change then flash the Tmo firmware? You can't just flash the Tmo Firmware via the modded Odin? Just to save confusion.
I would imagine it's worth it just to get the proper network options, VOLTE, WiFi calling and such.
How To Flash To T-Mobile
dbpaddler said:
so to do this we actually have to go to the canadian firmware first, do the csc change then flash the Tmo firmware? You can't just flash the Tmo Firmware via the modded Odin? Just to save confusion.
I would imagine it's worth it just to get the proper network options, VOLTE, WiFi calling and such.
Click to expand...
Click to collapse
This is the exact thread that I used. Follow the steps and you can skip engboot. If you flash the full Canadian firmware, its impossible to reverse. So, only flash whatever is in the steps. I successfully went from Verizon To T-Mobile and then back to Verizon. https://forum.xda-developers.com/galaxy-s8/how-to/switch-to-carrier-firmware-100-t3609487
This tread also helps, who wants to flash their phones: https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
As per the title, bought an unlocked G970U instead of U1 by mistake. Should I expect a Verizon splash screen greeting me in the bootloader? I don't wanna see any branding anywhere in my phone. Can I get rid of any of that flashing U1 firmware?
redsmith said:
As per the title, bought an unlocked G970U instead of U1 by mistake. Should I expect a Verizon splash screen greeting me in the bootloader? I don't wanna see any branding anywhere in my phone. Can I get rid of any of that flashing U1 firmware?
Click to expand...
Click to collapse
Which G970U phone you have bought. If it was a Verizon branded, then their logo should greet you If you bought T-Mobile variant, then its logo will be present while booting the phone. Flashing is possible and it depends which carrier you have. Also don't you have the phone in hand yet?
Charkatak said:
Which G970U phone you have bought. If it was a Verizon branded, then their logo should greet you If you bought T-Mobile variant, then its logo will be present while booting the phone. Flashing is possible and it depends which carrier you have. Also don't you have the phone in hand yet?
Click to expand...
Click to collapse
Yeah, the phone hasn't arrived yet. In the pictures I can see the box has no carrier logo, but I'm guessing it's Verizon because I haven't seen a Verizon branded box yet. Also, the box definitely says G970U.
I've been a Nexus/Pixel user all my flashing life, so I'm well versed in the fastboot/adb dark arts. How does this compare to Odin? There are so many new terms that I'm still trying to understand: CSC, HOME CSC, USERDATA, etc. Is there any guide I can follow to flash my incoming phone to U1 firmware?
redsmith said:
Yeah, the phone hasn't arrived yet. In the pictures I can see the box has no carrier logo, but I'm guessing it's Verizon because I haven't seen a Verizon branded box yet. Also, the box definitely says G970U.
I've been a Nexus/Pixel user all my flashing life, so I'm well versed in the fastboot/adb dark arts. How does this compare to Odin? There are so many new terms that I'm still trying to understand: CSC, HOME CSC, USERDATA, etc. Is there any guide I can follow to flash my incoming phone to U1 firmware?
Click to expand...
Click to collapse
The T-Mobile version is also G970U, so it can be pretty much any carrier. USERDATA file is present in carrier firmware, if you flash unlocked firmware you won't need/have this file.
Link below is for S8, but works for S10 as well. Of course you would need to use firmware files for your phone. I would also use instructions under "Flashing standard firmware" first using Standard Odin. If you get an error when staring to flash, then use (Patched) Prince Comsy's Odin.
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Charkatak said:
The T-Mobile version is also G970U, so it can be pretty much any carrier. USERDATA file is present in carrier firmware, if you flash unlocked firmware you won't need/have this file.
Link below is for S8, but works for S10 as well. Of course you would need to use firmware files for your phone. I would also use instructions under "Flashing standard firmware" first using Standard Odin. If you get an error when staring to flash, then use (Patched) Prince Comsy's Odin.
https://forum.xda-developers.com/gal...rrier-t3625817
Click to expand...
Click to collapse
Thanks a lot. One last question. I'm based in Mexico (we only get Exynos here), so I got a U version to get the Snapdragon CPU. Obviously I don't want any US carrier branding/blotware in the phone since I couldn't benefit whatsoever from it. What about OTA's, though? Will I get them whenever Samsung releases an update for U1? Or will that depend on my carrier? Should I update monthly using Odin? Do I have to factory reset? So many questions :silly:
The link you provided doesn't work, btw. But I've since found some other Odin guides. Thanks!
redsmith said:
Thanks a lot. One last question. I'm based in Mexico (we only get Exynos here), so I got a U version to get the Snapdragon CPU. Obviously I don't want any US carrier branding/blotware in the phone since I couldn't benefit whatsoever from it. What about OTA's, though? Will I get them whenever Samsung releases an update for U1? Or will that depend on my carrier? Should I update monthly using Odin? Do I have to factory reset? So many questions :silly:
The link you provided doesn't work, btw. But I've since found some other Odin guides. Thanks!
Click to expand...
Click to collapse
I corrected the link in case you need it.
To answer OTA question: I had unlocked U1 model of S8 and when I flashed it with T-Mobile firmware then my phone got OTA from T-Mobile when they release it. I assume if you have carrier branded phone and flash it with U1(XAA) firmware then most likely your phone will get updates when Samsung releases them. You won't have to use Odin every time there is an update if you flash properly. Also, it would be advisable to flash using CSC file instead of HOME CSC, so your phone would be wiped. It is because you change firmware and want your software to be fully compatible. After flashing and you check your phone's software update and see that is shows "not compatible or something similar", then I would just suggest you to do "reset"(factory reset) from setting and after you setup your phone, that message will disappear. Also don't do any software update before flashing as you phone may get a fresher firmware than the one you might be trying to flash.
1) Check your current phone firmware
2) Download firmware you want, but if you can, get the firmware that is a previous one than the current one, so you will check to see how your phone gets OTAs
3) Flash using Odin
4) After that disconnect and let the phone do its thing
5) Set it up and check to see if software update section in settings don't give you any messages such as the one I outlined above, if it does, just factory reset the phone
I have an AT&T unlocked S10+ that I've been running the T-Mobile firmware on since day one. Now I want to go back to the AT&T firmware and I have downloaded multiple AT&T firmwares. Each time I try to flash the firmware using Odin, it fails.
I can't figure out what I am doing wrong. The phone has the latest June update for T-Mobile. I wipe the device in recovery and then boot into download mode.
Anyone here please tell me what I am doing wrong.
funcritter said:
I have an AT&T unlocked S10+ that I've been running the T-Mobile firmware on since day one. Now I want to go back to the AT&T firmware and I have downloaded multiple AT&T firmwares. Each time I try to flash the firmware using Odin, it fails.
I can't figure out what I am doing wrong. The phone has the latest June update for T-Mobile. I wipe the device in recovery and then boot into download mode.
Anyone here please tell me what I am doing wrong.
Click to expand...
Click to collapse
What fail message is it giving?
If the T-Mobile firmware is bootloader version 2 the att firmware has to be bootloader version 2. You can't go back to version 1.
I've seen a couple of threads about this here, but I'm confused about where I can get the firmware to flash an unlocked S10 (SM-G973U1) to T-Mobile firmware, and they've not really told me where to download the firmware that I need. One thread pointed at S10+ firmware, not useful to me, and the other didn't give any URL for downloading firmware.
Can anyone help me find the right firmware? I've used Odin before, and am fine with that. I also know that I have to have the right firmware for this to work *smile*.
Also, the firmware to flash back from T-Mobile to unlocked would be very useful, since I may want to change back to unlocked at some point. The reason that I want to flash T-Mobile firmware is since I'm still on the May 1 "monthly" Android security update on my unlocked S10. That doesn't make me happy, more than a quarter behind by this point...very disappointed.
Thanks!
There's a firmware thread here:
https://forum.xda-developers.com/galaxy-s10/how-to/s10e-g973u-g973u1-firmware-links-t3905852
RogerSC said:
I've seen a couple of threads about this here, but I'm confused about where I can get the firmware to flash an unlocked S10 (SM-G973U1) to T-Mobile firmware, and they've not really told me where to download the firmware that I need. One thread pointed at S10+ firmware, not useful to me, and the other didn't give any URL for downloading firmware.
Can anyone help me find the right firmware? I've used Odin before, and am fine with that. I also know that I have to have the right firmware for this to work *smile*.
Also, the firmware to flash back from T-Mobile to unlocked would be very useful, since I may want to change back to unlocked at some point. The reason that I want to flash T-Mobile firmware is since I'm still on the May 1 "monthly" Android security update on my unlocked S10. That doesn't make me happy, more than a quarter behind by this point...very disappointed.
Thanks!
Click to expand...
Click to collapse
If the phone is SIM unlocked, the Firmware you want is the USC or XAA firmware... That way it will switch carriers apps and bloatware when you change sim cards...
Search for samfirm on google....
Have Fun!!
Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.
mtrackerbeyond said:
Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.
Click to expand...
Click to collapse
to your last point, at&t phones are notoriously bad at updating
factory unlocked phones will remain forever unlocked and phones unlocked that are bespoke to a specific carrier will also remain unlocked even with Odin flashes providing that the method employed to unlock it was legitimate. Some unlock methods employ root and only trick the phone into thinking its unlocked. Well, once you remove root, and thusly the trick, the unlock is gone. I have ran across rare examples where the person swore up and down that they unlocked their phone with a legit unlock code and that it relocked to a carrier once the sim was inserted and initial programming completed, but i dunno. Sounds weird to me, but every person who said this also said that the phone locked to a carrier other than the one it came from originally. Take that for what its worth, but i still mostly stand by the first couple lines of this section of my diatribe
If you want the at&t crap gone, get the N960U1 firmware and flash it in Odin. You will need the modified version of Odin to flash it so it can ignore the 255 errors the phone throws up from flashing firmware for a carrier (or, in this case, no carrier) on to a phone that it wasnt originally designated (not designed) for
go to sammobile.com/firmwares, get the info for the firmware you want to d/l, get the Frija tool or Samfirm and download the firmware thru one of those as theyre literally 5x faster and flash it
mtrackerbeyond said:
Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.
Click to expand...
Click to collapse
Hi, my phone is a Note 9 ATT factory unlocked.
Below is the link for my post
I've updated my phone using the link , and still unlocked and working Ok.
I hope it can help you .
https://www.google.com/amp/s/forum....note-9-att-rom-update-sept-2019-t3979303/amp/