hi
I have some BIG problems with my a6+ (SM-A605FN, not F or G....). I tried to root it. I explain: (i followed a guide on YouTube)
I activated the oem unlock (it made me reset the phone, which looks weird from be because I rooted a J3 2016 sm-j320fn without losing any data)
I downloaded and installed the TWRP recovery with Odin3 (v. 3.12), then formatted again the phone (from Wipe->Format Data).
The guide that I followed made me download these files: Magisk by defexer, latest no-verity-opt-encrypt and RMM-State_Bypass_Mesa_v2 and obv the TWRP. But it didn't made me download the SuperSU file that I used for the j3.
Now I can do anything. The phone, every time I TRY to boot goes in an infinite bootloop, it is impossible to install a fresh copy of Android neither from Odin nor directly from the TWRP.
What can I do? it is a new phone and I don't want to lose it.
Can I install a custom ROM? can I "unlock" it and install android?
every time that I try to do something from odin it gives me an error. only the twrp installation goes successfully.
here is the error: (this error is from trying to flash the bootloader, the AP error is about the same)
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1210)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn.lz4
<ID:0/007> Unassigned file
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Hello all, I have looked everywhere and no one seems to be having the same problem as I have here.
So here is the problem: My note 4 keeps going into recovery and is giving me a few messages.
1) In the stock Android recovery that it boots into, on the bottom it displays "dm-verity verification failed..."
2) When clicking on "apply update from external storage", it gives me "Update from external storage is disabled"
Background:
In a previous post, I was trying to install Xposed framework and had an issue where it would not install. A friendly user suggested I install a different APK and flash a zip file through TWRP. I then installed TWRP through a play store app and booted into it. I installed the zip file, wiped data (including Dalvik) and the problem started.
So I tried flashing original N910T Rom through Odin and this is the log I got
BTW I am still able to access TWRP through holding Volume Up:Homeower but when phone boots up it goes into Android Recovery mode automatically, no bootloop. I tried clearing Data but that didnt help. Should I clear "System" through TWRP and reflash?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANIH_N910TTMB1ANIH_N910TUVU1ANIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Superdudekk said:
So I tried flashing original N910T Rom through Odin and this is the log I got
BTW I am still able to access TWRP through holding Volume Up:Homeower but when phone boots up it goes into Android Recovery mode automatically, no bootloop. I tried clearing Data but that didnt help. Should I clear "System" through TWRP and reflash?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANIH_N910TTMB1ANIH_N910TUVU1ANIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you may need this
http://forum.xda-developers.com/not...f-g-c-t-w8-t3282641/post64569392#post64569392
Unfortunately I tried that but I found a solution! A helpful youtube video showed that with these new Samsung Phones, you can connect to Kie3 or Smart Switch and click "Emergency Software Recovery and Initialization", enter your model and serial number and the program will automatically wipe and flash OEM Samsung ROM onto the phone. Only bad thing is that you have to re-root the phone. Great solution for soft bricks.
Recently I installed Clockwork Mod on my sisters Samasung Galaxy I8190N and attempted to flash lollipop on it. Much to my disappointment somewhere in the process I failed. Now when the phone boots I see the lollipop loading animation, but it goes no further during the boot. I can no longer access the Clockwork Mod recovery with up+power+home button. But can still access the download mode. So I tried to reinstall the 4.1.2 using odin, however with odin I get the following error when trying to flash using the PDA/AP:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone (in download mode) it says Custom Modem Binary installed.
Any help in getting my sisters phone back to how it was before she gave it to me (default 4.1.2) would be greatly appreciated!
Edit: I realise after posting that this would of been better in the troubleshooting forum, apologies for that.
Factory reset or flash original firmware from sammobile
I was having issues with the WiFi on my phone so I made backups to the SD card, removed it and did a factory reset on the phone. I'm not sure what it was running at the time, but not lolipop. It now boots to AT&T logo and heats up until I pull the battery out (I've waited upwards of 30 mins). I tried flashing stock and 0F3 roms with odin and I get the error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone it says "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
I've tried flashing with PIT, tried flashing the boot loader, G870AUCU1ANE4_Full_Odin, and G870A_OC5_Bootloader, to no avail. I also downloaded Samsung Kies 3 and tried to do Firmware upgrade and initialization, which also didn't work. It comes up to Firmeware emergency recovery and asks for a recovery code (which I don't have). I've also tried from recovery mode to factory data reset and also tried to flash the roms from external SD. Is there anything else I can try or something I am missing that can get this working? Any help would be greatly appreciated.
I have installed a CM12.1 ROM on my Samsung GT-i8190N and today I've installed back to Carbon ROM 4.4.4. When flashing Carbon ROM I got nothing error and flashing it fine. But, I got error when first startup and it's say "Encryption Phone error" and only showed button "Reset to factory". Then after I press the button, it's get bootlop. I want to try clear dalvik cache in TWRP Recovery but TWRP doesn't appear. I already installed new TWRP via Odin but when i clear dalvik cache, there error say:
E: Failed to mount /system (invalid argument)
E: Failed to mount /data (invalid argument)
And then, i try to flash it back to stock firmware. I try the guide from this Thread But I got error in Odin, here the log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190DXAMJ1_I8190OLBAMJ1_HOME.TAR.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> modem.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
Please, someone know how to fix this? I have google but nothing way that work found.
you've flashed firmware for gt-i8190 and not for gt-i8190n
You probably updated your modem ( which if you bought your phone directly from China some of the partitions are write protected), try fire flash by chainfire from Google play store ( the inventor of superSu) follow instructions and then re-flash your firmware.
I have a Galaxy note 10.1 running kitkat 4.4.2 (GT-N8000)
Yesterday i was browsing the internet when suddenly the device decided to shut down and went on a restart boot loop where it would show the "Samsung galaxy note 10.1" screen for a while and then reboot and re-show the same screen
i have tried entering recovery mode but the tablet keeps restarting without end the only thing i can access is download mode
So recently i tried flashing using Odin but when ever i try to flash any file it shows this error
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing a stock recovery so i can try and wipe the current data
I have tried to download multiple stock roms from jelly bean to kitkat which all ended up failing
I have tried flashing the tablet with a "Repair rom" which contains the BL AP CSC and Modem files
i think that if i can still access the download mode that there is some hope to recover?
Any solutions?
Thanks in advance.
If i posted this in the wrong section forgive me i have just started out