Hi,
this module installs OxygenOS 4.7+ (what I know is which from 4.7.0 to 5.0.3 it's the same) Bootanimation systemlessly.
Instructions:
- Download the .zip file with your phone
- Flash the downloaded .zip in Modules section in Magisk Manager
- Reboot your phone twice (in my case, the first time I got Liquid Remix Oreo Bootanimation, which my OnePlus 5T runs :silly
Credits:
@dabistduja wich provided to me OOS Bootanimation
I got a bootloop. The animation worked just fine, but at some point it freezes and my phone reboots itself. I've removed all files from this module, according to this guide, but for some reason I'm still getting the animation and the bootloop. Any ideas?
EDIT: I figured it out. I had to remove /cache/magisk_mount/system/media/bootanimation.zip as well.
I didn't find anything relevant in the logs so I won't even bother to post it here. It's also worth mentioning that my phone is encrypted, and it seems to me that the freezing/reboot happens right before I'm about to see that screen prompting for my password.
@alessio89g May I come with a few of suggestions?
First, since you're copying the animation zip to /cache you don't really need to mount it to /system. You could keep the zip in the common folder, of the zip, copy it to the module folder during installation, and then copy it from there.
Second, since you're copying the zip to a place that isn't affected by the installed module, also place a script in post-fs-data.d or service.d (service.d is preferred, but might not be possible depending on the rest of the setup) that can delete the zip and itself if the module has been uninstalled. If you don't do this, the animation zip has to be manually removed when they module had been uninstalled.
Third, you can avoid the second reboot when installing the module if you also run the copy to /cache command during installation.
Edit: @robotsrules Thank you. I'll update that part of the guide with info about removing other files that might be placed by modules.
Didgeridoohan said:
@alessio89g May I come with a few of suggestions?
First, since you're copying the animation zip to /cache you don't really need to mount it to /system. You could keep the zip in the common folder, of the zip, copy it to the module folder during installation, and then copy it from there.
Second, since you're copying the zip to a place that isn't affected by the installed module, also place a script in post-fs-data.d or service.d (service.d is preferred, but might not be possible depending on the rest of the setup) that can delete the zip and itself if the module has been uninstalled. If you don't do this, the animation zip has to be manually removed when they module had been uninstalled.
Third, you can avoid the second reboot when installing the module if you also run the copy to /cache command during installation.
Edit: @robotsrules Thank you. I'll update that part of the guide with info about removing other files that might be placed by modules.
Click to expand...
Click to collapse
Thanks for your suggestions, but I think I understood half of what you said, a bit 'because of my bad English, and a little' because I'm not a Magisk script expert.
If you want to edit and improve the module, you're welcome.
Hello everybody.
I've read that 18.1 supports 4.2+ so I've tried to install in two MTK6589T devices I've. One running 4.2, the other running 4.4
CMW/TWRP gave an error mounting system, so I mounted system manually and it started flashing. Firstly it detected old root installed and disabled the old root. But when it tried to find the boot, installation was aborted because installator claims cannot find the boot on both phones.
Then I though, okay, lets reboot back to android, I will try to install a few days later, maybe its buggy now, but both phones cannot boot.
I can easily fix them by flashing rom again I guess, but I would like to know where's the issue and also post it for more people could face the same problem.
Any idea where's the problem/how to fix without rom reflashing? I've tried magisk uninstaller but after mounting system in recovery it is also giving error.
Thanks
UPDATE: For now, if no other solution is found, bootloop can be bypassed by dirty installing the rom again. But it has to be an easier workaround...
We know now that the problem is caused because of two factors merging:
1- Using Magisk.zip installer through custom recovery
2-In the case that the custom recovery CMW/TWRP installed in the phone is very old (for instance, CMW automade for MTK6589X or TWRP 2.5.0).
While installing, Magisk tries to send commands to the custom recovery that cant be understood by it, leaving the installation incomplete after some modifications in /system (read below recovery log).
Acording to the recovery, it seems that Magisk did some modifications without running correctly survival script - Adding addon.d survival script ("Unrecognized option '-Xnodex2oat'") and .zip installer is not designed to revert actions in this case.
Also, Magisk couldn't reach the boot modification step, so boot is not damaged, therefore workarounds for restoring boot won't work.
Using Magisk Unistaller.zip is also not possible as the uninstaller is mainly designed for boot backup restoration, and again, this is not the case.
Currently needed: Find what's wrong in system due to the incomplete Magisk installation to revert it back to the original state (before faulty magisk.zip installation).
Recovery log:
************************
* Magisk v18.1 Installer
************************
- Mounting /system, /vendor
- Target image: /dev/bootimg
- Device platform: arm
- Removing system installed root
- Constructing environment
- Adding addon.d survival script
Unrecognized option '-Xnodex2oat'
up!
I' also having the same problem. My Samsung J2 Prime stuck at logo after updating to 18.1. Any tips on how to fix it without resetting my phone? Thanks.
Update: Bootloop fixed. I used TWRP to restore boot image. I then update Magisk by flashing zip file from TWRP. Everything went back to normal. Hope this help.
trol_sg said:
Hello everybody.
I've read that 18.1 supports 4.2+ so I've tried to install in two MTK6589T devices I've. One running 4.2, the other running 4.4
CMW/TWRP gave an error mounting system, so I mounted system manually and it started flashing. Firstly it detected old root installed and disabled the old root. But when it tried to find the boot, installation was aborted because installator claims cannot find the boot on both phones.
Then I though, okay, lets reboot back to android, I will try to install a few days later, maybe its buggy now, but both phones cannot boot.
I can easily fix them by flashing rom again I guess, but I would like to know where's the issue and also post it for more people could face the same problem.
Any idea where's the problem/how to fix without rom reflashing? I've tried magisk uninstaller but after mounting system in recovery it is also giving error.
Thanks
Click to expand...
Click to collapse
If you have a backup of your boot image, you can just restore it using TWRP. But in case that you have no backup of boot image, you can try to get boot image from the internet and restoring using it. In my case, this is what I did.
1. Go to TWRP and then make backup of boot image of the faulty phone*. (Folder 1)
2. I used another J2 prime to create a boot image backup. (Folder 2)
3. Once that is done, copy and replace the files inside the Folder 2 into Folder 1.
4. Reboot to TWRP again then use that to restore the boot image on my stuck J2.
Tips: make backup in SD card so you can easily swap it in between the bad and good phone.
*This is to create a folder of the backup file. I did tried to directly copy and paste the backup boot image file from another good phone but TWRP didn't detect it. So this is the workaround that I come with. And it worked for me.
Thanks for your answer but I doubt your case is mine. Your device is much newer than mine and according to your comment, you've sucesfully installed previous version of Magisk without issues. This is not a problem while updating, as Magisk v. earlier than 18.1 was not compatible with android 4.2+. I think Magisk is not compatible with MT6589T even if they run 4.2 or 4.4.
I think that it cannot be a boot problem as TWRP/CWM displayed msg 'Boot cannot be found' while installing Magisk, so that I don't think boot was replaced or modified in any ways. Moreover, the bootloop is not in the boot loading, as phone can pass boot image without any problem, but it is stuck in android loading image. I'm thinking in some script or root modification that Magisk did before trying to unpack the boot, however I'm not that deep into the Magisk install to find the proper workaround.
I can restore boot backup and also I can take boot file from the original rom and flash, because in Mediatek-based devices, boot.img is inside de zip, but I dont think it will solve the problem. Anyhow I'll get back ASAP with the answer.
Any more ideas??
Nothing, boot/uboot restoration or flashing again just the boot won't fix the problem, so it's something that Magisk installator touch in /system or /data I guess, but what?
trol_sg said:
Nothing, boot/uboot restoration or flashing again just the boot won't fix the problem, so it's something that Magisk installator touch in /system or /data I guess, but what?
Click to expand...
Click to collapse
Have you read/tried this?
didgeridoohan(dot)com/magisk/MagiskIssues
Ato09 said:
Have you read/tried this?
didgeridoohan(dot)com/magisk/MagiskIssues
Click to expand...
Click to collapse
Yes, I've read them before I made the post. I've also looked for a solution in some of the threads and using search, but couldn't find a way.
Here I attach recovery.log if someone is interested to see the detailed problem.
Also, here below I attach the lines concerning the installation. All other is uninstallation tries and so on:
************************
* Magisk v18.1 Installer
************************
- Mounting /system, /vendor
- Target image: /dev/bootimg
- Device platform: arm
- Removing system installed root
- Constructing environment
- Adding addon.d survival script
Unrecognized option '-Xnodex2oat'
dalvikvm: [options] class [argument ...]
dalvikvm: [options] -jar file.jar [argument ...]
The following standard options are recognized:
-classpath classpath
-Dproperty=value
-verbose:tag ('gc', 'jni', or 'class')
-ea[:<package name>... |:<class name>]
-da[:<package name>... |:<class name>]
(-enableassertions, -disableassertions)
-esa
-dsa
(-enablesystemassertions, -disablesystemassertions)
-showversion
-help
The following extended options are recognized:
-Xrunjdwp:<options>
-Xbootclasspath:bootclasspath
-Xcheck:tag (e.g. 'jni')
-XmsN (min heap, must be multiple of 1K, >= 1MB)
-XmxN (max heap, must be multiple of 1K, >= 2MB)
-XssN (stack size, >= 1KB, <= 256KB)
-Xverify:{none,remote,all}
-Xrs
-Xint (extended to accept 'ortable', ':fast' and ':jit')
These are unique to Dalvik:
-Xzygote
-Xdexopt:{none,verified,all,full}
-Xnoquithandler
-Xjniopts:{warnonly,forcecopy}
-Xjnitrace:substring (eg NativeClass or nativeMethod)
-Xstacktracefile:<filename>
-Xgc:[no]precise
-Xgc:[no]preverify
-Xgc:[no]postverify
-Xgc:[no]concurrent
-Xgc:[no]verifycardtable
-XX:+DisableExplicitGC
-X[no]genregmap
-Xverifyopt:[no]checkmon
-Xcheckdexsum
-Xincludeselectedop
-Xjitop:hexopvalue[-endvalue][,hexopvalue[-endvalue]]*
-Xincludeselectedmethod
-Xjitthreshold:decimalvalue
-Xjitcodecachesize:decimalvalueofkbytes
-Xjitblocking
-Xjitmethod:signature[,signature]* (eg Ljava/lang/String\;replace)
-Xjitclass:classname[,classname]*
-Xjitoffsetffset[,offset]
-Xjitconfig:filename
-Xjitcheckcg
-Xjitverbose
-Xjitprofile
-Xjitdisableopt
-Xjitsuspendpoll
Configured with: debugger profiler hprof jit(armv7-a-neon) smp show_exception=1
Failed to initialize runtime (check log for details)
- Unpacking boot image
MagiskBoot v18.1(18100) (by topjohnwu) - Boot Image Modification Tool
Parsing boot image: [/dev/bootimg]
No boot image magic found!
! Unable to unpack boot image
- Unmounting partitions
E:Error executing updater binary in zip '/sdcard/Magisk-v18.1.zip'
Error flashing zip '/sdcard/Magisk-v18.1.zip'
@trol_sg I'm gonna guess it's got to do with the absolutely ancient TWRP you're using. It just can't handle everything that the Magisk installation script is trying to do...
Your best bet (if Magisk will work at all on your device) is to patch the boot image with the Magisk Manager and then flash the patched image manually. There are new and shiny installation instructions available here: https://topjohnwu.github.io/Magisk/
Didgeridoohan said:
@trol_sg I'm gonna guess it's got to do with the absolutely ancient TWRP you're using. It just can't handle everything that the Magisk installation script is trying to do...
Your best bet (if Magisk will work at all on your device) is to patch the boot image with the Magisk Manager and then flash the patched image manually. There are new and shiny installation instructions available here: https://topjohnwu.github.io/Magisk/
Click to expand...
Click to collapse
Thank you so much for your answer. So it's the recovery, but can't find newer ones, sadly. Too old phones I know, but just curious if I could make Magisk working on them, lol.
I was going into the boot modification manually right now, but in order to patch the boot I need manager installed first, and phone couldn't boot so I did dirty flash of the rom to be able to boot into it again.
Lets see what happens then. I'll be right back.
Anyhow, this is not a solution to fix the problem of bootloop that I am requesting help in case someone could face the same and did not make a backup of the phone and didn't want to make dirty re-flash. Any idea?
Update: After I did dirty flash of the rom, and now Jiayu g3s android 4.4 booted.
UPDATE: So, after patching manually boot and installing (using restore in TWRP 2.5 as image flash is not yet implemented AFAIK), phone booted and yes Magisk is working.
Magisk installation .zip through a very old recovery is making the bootloop. So that, a thing learnt now.
But, for other people facing this bootloop, can we do a research to find what magisk.zip did to the phones to leave them in bootloop? Maybe we can revert without rom flashing easily if we knew what's the issue...
Thanks in advance!
Doing a bit more tests I found that magisk.zip did something in /system so that it is left in bootloop, but still no idea why/whats causing that...
There are delay complete boot like 4 5 second in j7 prime. I didn't love this version
any more help?? up!!
trol_sg said:
Yes, I've read them before I made the post. I've also looked for a solution in some of the threads and using search, but couldn't find a way.
Click to expand...
Click to collapse
Try this.
Quote:
Originally Posted by void74
I faced this problem too this morning.
I have a Redmi Note 5 with AOSiP ROM, I don't know if it's the right way to do it, but I solved the bootloop problem this way:
- volume up and then boot to TWRP
- copied magisk uninstall to phone memory
- installed magisk uninstall
- rebooted in fastboot/bootloader mode
- flashed original boot.img extracted from stock image zip file ("fastboot flash boot boot.img")
- rebooted to TWRP
- installed magisk 17.0 zip file
- rebooted to system, all OK!
Only problem is that I lost previous magisk configuration, but it's a snap to reconfigure it!
Quote:
Originally Posted by Mangraviti
Here is what to do, if you HAVE NOT installed the new version:
1) Do not update via Magisk Manager.
2) Do not update via TWRP using the zip you can download via Magisk Manager.
3) Uninstall Magisk using Magisk uninstaller (ZIP).
4) Boot to Android.
5) Reboot to TWRP
6) Install V17 ZIP via TWRP and boot to Android.
If you HAVE INSTALLED and got a bootloop:
1) Download the uninstaller ZIP.
2) Enter TWRP during the bootloop.
3) Uninstall using the uninstaller ZIP.
4) Boot to Android.
5) Download V17.
6) Reboot to TWRP and flash the V17.
7) Boot to Android it it should be working.
-------------
Original post. https://forum.xda-developers.com/apps/magisk/bootloop-magisk-update-t3836904
Hope it help.
Ato09 said:
Try this.
Quote:
Originally Posted by void74
I faced this problem too this morning.
I have a Redmi Note 5 with AOSiP ROM, I don't know if it's the right way to do it, but I solved the bootloop problem this way:
- volume up and then boot to TWRP
- copied magisk uninstall to phone memory
- installed magisk uninstall
- rebooted in fastboot/bootloader mode
- flashed original boot.img extracted from stock image zip file ("fastboot flash boot boot.img")
- rebooted to TWRP
- installed magisk 17.0 zip file
- rebooted to system, all OK!
Only problem is that I lost previous magisk configuration, but it's a snap to reconfigure it!
Quote:
Originally Posted by Mangraviti
Here is what to do, if you HAVE NOT installed the new version:
1) Do not update via Magisk Manager.
2) Do not update via TWRP using the zip you can download via Magisk Manager.
3) Uninstall Magisk using Magisk uninstaller (ZIP).
4) Boot to Android.
5) Reboot to TWRP
6) Install V17 ZIP via TWRP and boot to Android.
If you HAVE INSTALLED and got a bootloop:
1) Download the uninstaller ZIP.
2) Enter TWRP during the bootloop.
3) Uninstall using the uninstaller ZIP.
4) Boot to Android.
5) Download V17.
6) Reboot to TWRP and flash the V17.
7) Boot to Android it it should be working.
-------------
Original post. https://forum.xda-developers.com/apps/magisk/bootloop-magisk-update-t3836904
Hope it help.
Click to expand...
Click to collapse
Hello, thanks
This method won't work in my case as in the step:
- installed magisk uninstall = gives error
Note 5 is much newer phone with a recent recovery TWRP that allows all Magisk.zips commands, but unluckyly not this case.
Also, this method is for wrong boot installation/damaged boot. In my case what Magisk damage is /system, not boot.
I wish it could be boot, because that is very easy to fix (flashing through fastboot/SP Flash tools in the case of MTK, recovering boot twrp "backup" even if you didn't make backup...) as you mentioned.
Hope someone have a great idea to revert system to origin, then we could post the solution for those who would like to install Magisk in 4.2+ old phones, and instead of doing boot flash manually, they try to flash magisk.zip and they got bootloop.
Main post updated with all thread information. Up!
Nothing?? Up!!
trol_sg said:
Hope someone have a great idea to revert system to origin, then we could post the solution for those who would like to install Magisk in 4.2+ old phones, and instead of doing boot flash manually, they try to flash magisk.zip and they got bootloop.
Click to expand...
Click to collapse
The only part of the Magisk installation that actually touches /system is if it installs the addon.d survival script. The log you posted earlier shows that it's trying to do this, for some reason, and failiing. I'd start looking there...
Hi peeps,
In the name of science, and stubbornness, I've been trying to swap the back and recent buttons on the navbar. I was using IconBoy's Magisk Module as a guide. Long story short, I dun goofed, and now SystemUI doesn't work. I start the phone up, and I get a black screen. The battery and clock at the top come in and out, and the power window when you hold the power button is an old school one and also jumps around.
If I flash the stock boot image to remove root, the phone works. I did that and deleted zip, but I don't know how to disable the module. Without root, Magisk manager is locked down, with root it just goes back to the black screen. Any advice?
Without root, Magisk manager is locked down, with root it just goes back to the black screen. Any advice?
Click to expand...
Click to collapse
I sometimes wish we could delete our threads, but since it's here, so hopefully it can help someone else. You need to boot Magisk into core mode. To do that:
1) Flash your Magisk patched boot image.
2) Use osm0sis' Android Image Kitchen tool to unpack your Magisk boot image.
3) Place Tulsadive's overlay.d directory (from here) into the extracted ramdisk directory (there isn't one there, so you aren't overwriting anything).
4) Repack your files into a boot image using Image Kitchen.
5) Flash your new boot image.
6) Restart your phone, disable the bad module, go into settings, and disable core mode.
7) Reboot into bootloader, flash your normal Magisk patched image, and restart.
8) Celebrate that you don't have to wipe your phone
Hi, I have installed a magisk module that brokes the system and gets stuck on Havoc OS logo, by flashing original boot image I'm using the phone seamless, but I'm not root anymore.
I tried with TWRP filemanager, but for this device (Redmi Note 9 merlin) it must not work very well and I can't go inside /data/adb/modules folder (It says I haven't permission for that). I didn't found a way to do with adb (but I hope it's possible).
Any idea would be welcome, thanks!
You can't.
For removing modules, you have two methods.
For first method, you need to boot in emergency mode, open magisk manager, remove module and reboot.
(It works only with magisk +v21.)
(To boot in emergency mode, keep pressed volume down after boot starts.)
For second method, you need to flash the original stock boot.img, open magisk manager, remove module, reboot and then flash the magisk patched boot.img again.
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Hi, i tried many times to use MAGISK app on a tablet ASUS FONEPAD 7 (model K00E) with Lollipop in order to patch the BOOT.IMG.
Always failed during the patching, with the messages:
DEVICE PLATFORM: x86
COPYING IMAGE TO CACHE
UNPACKING BOOT IMAGE
CHECKING RAMDISK STATUS
STOCK BOOT IMAGE DETECTED
PATCHING RAMDISK
REPACKING BOOT IMAGEUNABLE TO REPACK BOOT IMAGE!
INSTALLATION FAILED
I have searched for all the possible articles etc, without success.
I have tried many different versione of MAGISK, the last 20.4 and MANAGER 8.0.2 (i have used MAGISK install >> go >> method select and file update >> boot.img)
Obviously i have the original BOOT.IMG file, loaded on internal memory.
Please, may you help me?
Thanks in advance
Marco G
That's a pretty old device, and since Asus has been known to not quite follow Android standards I wouldn't be surprised if it's simply not compatible...
Since you say that you used Magisk v20.4 it might be worth it to try the Canary build (just in case there's been some kind of improvement upstream). You can find the Canary Manager on GitHub:
https://github.com/topjohnwu/Magisk
And providing the actual installation log is always a good idea (there's a disc icon in the flashing window).