Related
I tried to delete "Pixel Experience" magisk module, it turned into a bootloop, so I tried to unroot with the MiA2 toolbox. The bootloop was still there so I googled a little and flashed substratum rescue with sideload. Still bootloop so I formatted data with pitchblack (all with the toolbox) and still bootloop. Tried the unbrick/revert to stock option and still in bootloop (it fails flashing system_b parse 3/5). Tried redownloading 3 times. Can't flash stock rom with sideload. I don't know what to do...
boot to fastboot and use this command to boot to edl mode
fastboot oem edl
and use MIflash to flash stock rom.
upcita said:
boot to fastboot and use this command to boot to edl mode
fastboot oem edl
and use MIflash to flash stock rom.
Click to expand...
Click to collapse
Thank you for this!! I've managed to unbrick my bootlooping Mi A2.
If you have some difficulties finding fastboot rom for some G5S+ variant, I suggest using Lenovo Moto Smart Assistant (LMSA). You can download it from here and install on your PC.
How to download latest specific stock fastboot rom for your G5S+
You must:
Using stock rom (locked or unlocked bootloader).
Install Lenovo Moto Smart Assistant on your PC.
Restore stock firmware, recovery, and boot image (if you changed it before).
Steps:
Reboot your phone to bootloader.
Open "Lenovo Moto Smart Assistant".
Connect your phone to PC using the USB cable.
Choose "Flash" menu on LMSA.
Choose "Moto Phone".
Choose "Moto G Plus (5th Gen S)".
Choose your phone models.
Wait for a minute while LMSA checking your phone, and then choose "Rescue". It will download the latest 1.5+ GB stock fastboot rom based on your phone model. You can find it on "C:\ProgramData\LMSA\Download\RomFiles".
Click "Rescue" to flash latest rom and accept some confirmations. Your phone will be rebooted after flashing process completed.
Now your phone is back to stock rom. Of course, if you have unlocked it before, those steps wouldn't lock your bootloader. If you want to lock it, I suggest you do it immediately after flashing process completed.
Here to lock your phone after successful stock rom restoration.
You must:
Have ADB fastboot driver installed.
Get extracted fastboot rom from "C:\ProgramData\LMSA\Download\RomFiles".
Steps
Reboot to bootloader.
Open "Command Prompt" on your PC, and go to the location of extracted fastboot rom.
Connect your phone to PC using the USB cable.
Check first that your phone is connected using "fastboot devices" command.
Do all below commands in sequence:
Code:
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash boot boot.img
fastboot oem lock
Your phone will be restarted. There will be no unlocked bootloader message anymore. And you'll have your phone locked. Ta-da .
Note:
Check "system.img_sparsechunk.x" files (where "x" is sequential numbers) in extracted fastboot rom folder. Newer rom may have more files than the older one. You must flash ALL those "system.img_sparsechunk.x" files in sequence.
If you have issues, please share here. Thanks are appreciated.
I did all above steps but my G5 plus is still saying it has an unlocked bootloader with a ID: Invalid key error.
My phone simply avoids the bootloader to be relocked... it's just pure garbage...
What is the reason for relocking the bootloader? You don't get the warranty back...
should i setup my devices and come back to bootloader or without setup please clear this
thanks in advance
Will Moto Smart Assistant also work for the G7 (Play)?
Motorola support sais no (and that there is no way at all to restore the images after unlocking the bootloader)... will try to find out myself later today.
And another question, do people have experience with updating Motos via Moto Smart Assistant? Reason is that latest models (G7) do not allow for OTA updates with bootloader unlocked. Am wondering if it will still be possible via the Smart Assistant - provided that works at all
Does it require only stock rom?
Can i flash the stock rom using lenovo smart assistant when the phone is with custom rom?
Tried it all, but no good news.
Did it all, but my phone is stuck in boot screen. Can enter bootloader and recovery but can't do anything else. Tried everything I could find online (adb flash from twrp, fastboot flash [stock rooms, custom rooms]). Just keep getting kernel errors. If someone could please give me a light I would aprecciate a lot. This started after I installed lineage and tried to restore it back to stock via fastboot flashing (Potter retail 8.1), since fingerprint sensor stoped working on lineage. Mine is XT1802
Install Pixel Experience ROM
voliveira92 said:
Did it all, but my phone is stuck in boot screen. Can enter bootloader and recovery but can't do anything else. Tried everything I could find online (adb flash from twrp, fastboot flash [stock rooms, custom rooms]). Just keep getting kernel errors. If someone could please give me a light I would aprecciate a lot. This started after I installed lineage and tried to restore it back to stock via fastboot flashing (Potter retail 8.1), since fingerprint sensor stoped working on lineage. Mine is XT1802
Click to expand...
Click to collapse
I am on Pixel Experience ROM and this ROM is purely copy of Android Pie of Pixel Devices and most stable rom
Prepare an sd card and copy pixel Experience ROM winrar file then put it in your phone and flash going into the recovery mode
This will work out for your device and will start up again
Abhimlv12345 said:
I am on Pixel Experience ROM and this ROM is purely copy of Android Pie of Pixel Devices and most stable rom
Prepare an sd card and copy pixel Experience ROM winrar file then put it in your phone and flash going into the recovery mode
This will work out for your device and will start up again
Click to expand...
Click to collapse
hello i was looking around to fix my revvl xt-1952-t ( motola g 7)
its stuck in boot loop flashing bad key ( always had bad key since unlocking the phone. )
i have done a couple roms on samsung devices and never on any thing else .
fast boot is some what new to me. i love it vr oden installs . so i went to reinstall
stock rom on a extra phone
and didnt not get it to load i have whipped and reinstalled 4 tines checked the models var etc seems like it is all correct . is there any ideas or tricks i could be missing
I think i did it without flashing the sparsechunk
I dirty flashed a new version of xiaomi.eu stable build, and it caused TWRP to uninstall itself.
Whenever I hold power on and volume up it just goes to fastboot.
Now I tried reinstalling TWRP like I've done many times before, but it keeps throwing an error. The error I get is when trying to boot without flashing the img. When I do this, I get the error:
Code:
fastboot boot TWRP.img"
downloading 'boot.img'...
OKAY [ 1.609s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 1.675s
Anyone gotten any ideas on what could be going on here? I'm scared to try anything as my phone currently works, but I need TWRP back to update my phone to a different versions and to install the clock mod again.
Thanks!
Got it to load once, but now back to square one. Throwing same error.
Now when running the command fastboot reboot recovery it's saying
Code:
fastboot: usage: unknown reboot target recovery
And writing 'fastboot boot twrp.img' turns the phone off / makes the screen go black. Fully bricked now as the OS wont load either.
Try on a computer with a USB 2.0 port, or a different usb cable, had the same issue once
Ended up having to reinstall dev rom. Device relocked, so have to wait 15 days again. @BusterBg_18 Thanks, will do when I unlock the device
EDIT: When using Mi Flash tool, make sure to check 'clean all' and not 'clean all and lock' in the bottom right. That's what set me back 2 weeks.
I have the same error. How can I fix this pls?
MrkoZino said:
I have the same error. How can I fix this pls?
Click to expand...
Click to collapse
Flash the latest official rom then start all over again. Follow the post above you about miflash.
Hello, I've had the same problem, then flashed latest dev rom via MiFlash and it booted, but now after I flash any custom ROM in TWRP i have this issue again and need to reflash chinese ROM. How can I flash any custom rom?
i'm stuck in the same issue. stuck in fastboot and it would not load recovery. any fix?
Hi, i fixed the "Failed to load/authenticate boot image: Load Error" by simply restarting the Device.
It seems to appear randomly when flashing partitions and then block all further Transfers.
If the Device loops in Fastboot, the only Solution to me was re flashing the Stock Firmware.
greendra8 said:
And writing 'fastboot boot twrp.img' turns the phone off / makes the screen go black. Fully bricked now as the OS wont load either.
Click to expand...
Click to collapse
I have the same Issue, but reflashing Stock Firmware or making OTA Updates dident helped for me. Ive already tried TWRP and OrangeFox without success. The Screen always turns black and Fastboot stays active in an limited Mode, any Ideas? My host Computer only has 3.0+ Ports only, but ive used an 2.0 Extender so it should be fine?
DJPlaya said:
Hi, i fixed the "Failed to load/authenticate boot image: Load Error" by simply restarting the Device.
It seems to appear randomly when flashing partitions and then block all further Transfers.
If the Device loops in Fastboot, the only Solution to me was re flashing the Stock Firmware.
I have the same Issue, but reflashing Stock Firmware or making OTA Updates dident helped for me. Ive already tried TWRP and OrangeFox without success. The Screen always turns black and Fastboot stays active in an limited Mode, any Ideas? My host Computer only has 3.0+ Ports only, but ive used an 2.0 Extender so it should be fine?
Click to expand...
Click to collapse
long time ago now. but i remember at one point having to flash the stock firmware using the mi unlock tool. i also remember trying every single version of twrp and rom until one finally worked. sorry i can't help much but i believe that's how i eventually fixed it.
hi, I've experienced with the same thing.
this methode help me out from it.
try to reflashing some file image from the rom where youre want to install in hh with adb.
copy this files below from rom image to adb folder
1. system.img (command in adb >> fastboot flash system system.img)
2. boot.img (command in adb like #1, change the name of img file) do till #6
3. vendor.img
4. dtbo.img
5. cust.img
6. misc.img
7. now flashing twrp/recovery.img (choose twrp compatible with rom you want to install) with adb
8. the "fastboot boot recovery.img" with adb
9. flashing the rom by twrp
Marihot said:
hi, I've experienced with the same thing.
this methode help me out from it.
try to reflashing some file image from the rom where youre want to install in hh with adb.
copy this files below from rom image to adb folder
1. system.img (command in adb >> fastboot flash system system.img)
2. boot.img (command in adb like #1, change the name of img file) do till #6
3. vendor.img
4. dtbo.img
5. cust.img
6. misc.img
7. now flashing twrp/recovery.img (choose twrp compatible with rom you want to install) with adb
8. the "fastboot boot recovery.img" with adb
9. flashing the rom by twrp
Click to expand...
Click to collapse
Where do you get these .img files?
iconoclasthero said:
Where do you get these .img files?
Click to expand...
Click to collapse
all img files come from the official rom china stable V12.0.2.0.QEBCNXM (.tgz), download and extract the tgz file then find img files from images folder
Marihot said:
all img files come from the official rom china stable V12.0.2.0.QEBCNXM (.tgz), download and extract the tgz file then find img files from images folder
Click to expand...
Click to collapse
Please tell the details for this method
greendra8 said:
Ended up having to reinstall dev rom. Device relocked, so have to wait 15 days again. @BusterBg_18 Thanks, will do when I unlock the device
EDIT: When using Mi Flash tool, make sure to check 'clean all' and not 'clean all and lock' in the bottom right. That's what set me back 2 weeks.
Click to expand...
Click to collapse
BROOOOOOOOOO HAHAHAHAHAHA I LITERALLY JUST READ YOUR COMMENT AND 10 SECONDS LATER I FLASH THE ROM WITH "CLEAN ALL AND LOCK" Im a f-king dumb bro
Marihot said:
你好，我也经历过同样的事情。
这个方法帮助我摆脱它。
尝试使用 adb 从要在 hh 中安装的 rom 中重新刷新一些文件映像。
将下面的文件从 rom 映像复制到 adb 文件夹
1.system.img（adb >> fastboot flash system system.img中的命令）
2. boot.img（adb 中的命令，如#1，更改 img 文件的名称）直到 #6
3. 供应商.img
4.dtbo.img
5. 自定义.img
6. 杂项.img
7. 现在用adb刷twrp/recovery.img（选择twrp与你要安装的rom兼容）
8. adb 的“fastboot boot recovery.img”
9. twrp刷入rom
Click to expand...
Click to collapse
Thank you, brother
try fastboot set_active a
or fastboot set_active b
Strange, maybe I am missing something but not aware of what...
I've been on Revolution OS and as being curious I gave Android Q a try....means, I flashed "Q" successfully yesterday -through Mi flashing tool- but wasn't happy at all, therefore I went back to Global Dev (again via Mi Flashing tool) to reinstall Revoultion.....Regardless of which TWRP version I' am trying to flash, even after Fastboot is indicating a successful TWRP flash I am not able to access the Recovery. Trying to use adb reboot recovery ends-up in the stock recovery....also fastboot boot recovery.img dosn't help....
even trying to flash the TWRP version I used to install Revolution recerntly does not work.
flyingjack said:
Strange, maybe I am missing something but not aware of what...
I've been on Revolution OS and as being curious I gave Android Q a try....means, I flashed "Q" successfully yesterday -through Mi flashing tool- but wasn't happy at all, therefore I went back to Global Dev (again via Mi Flashing tool) to reinstall Revoultion.....Regardless of which TWRP version I' am trying to flash, even after Fastboot is indicating a successful TWRP flash I am not able to access the Recovery. Trying to use adb reboot recovery ends-up in the stock recovery....also fastboot boot recovery.img dosn't help....
even trying to flash the TWRP version I used to install Revolution recerntly does not work.
Click to expand...
Click to collapse
What I've found is normal commands to boot into recovery do not work for this phone. Boot into fastboot, flash recovery then use volume up and power combination to boot into recovery. Hopefully that will get you back in.
flyingjack said:
Strange, maybe I am missing something but not aware of what...
I've been on Revolution OS and as being curious I gave Android Q a try....means, I flashed "Q" successfully yesterday -through Mi flashing tool- but wasn't happy at all, therefore I went back to Global Dev (again via Mi Flashing tool) to reinstall Revoultion.....Regardless of which TWRP version I' am trying to flash, even after Fastboot is indicating a successful TWRP flash I am not able to access the Recovery. Trying to use adb reboot recovery ends-up in the stock recovery....also fastboot boot recovery.img dosn't help....
even trying to flash the TWRP version I used to install Revolution recerntly does not work.
Click to expand...
Click to collapse
I escaped from the FASTBOOT loop by flashing the FASTBOOT ROM using command.
ROM I used
cepheus_global_images_V10.2.6.0.PFAMIX_20190327.0000.00_9.0_global_9cc39b4570.tgz
The command I used
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash cust cust.img
fastboot flash dtbo dtbo.img
fastboot flash dummy dummy.img
fastboot flash logo logo.img
fastboot flash metadata metadata.img
fastboot flash misc misc.img
fastboot flash persist persist.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
fastboot erase userdata
fastboot flash userdata userdata.img
fastboot reboot
Finally I found a TWRP version that is working (3.3.0-0423 by wzsx150 -thx mate!) and got back to Revolution OS!!
Thx also for your support!
Can't even fastboot flash boot recovery system...and thats all folks...waste of money.
Failed attempt to unlock the bootloader and instal TWRP ?
Hi guys, visit this link. We had similar problems and we could solved that.
Read all and you would get the solution
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
roadworker said:
Failed attempt to unlock the bootloader and instal TWRP ?
Click to expand...
Click to collapse
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Just flash the ROM again..It will be back lm
mhex said:
Just flash the ROM again..It will be back lm
Click to expand...
Click to collapse
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
SuperDroidMe said:
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
Click to expand...
Click to collapse
Every time you restart back to the bootloader you need to do: "fastboot oem nubia_unlock NUBIA_NX629J" first
SuperDroidMe said:
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Click to expand...
Click to collapse
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
xphyle1971 said:
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
Click to expand...
Click to collapse
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
SuperDroidMe said:
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
Click to expand...
Click to collapse
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
mswl04 said:
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
SuperDroidMe said:
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
Click to expand...
Click to collapse
btw did you rooted the phone?
mswl04 said:
btw did you rooted the phone?
Click to expand...
Click to collapse
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
SuperDroidMe said:
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
Click to expand...
Click to collapse
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
mswl04 said:
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
Click to expand...
Click to collapse
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
SuperDroidMe said:
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
Click to expand...
Click to collapse
all you need to do is to fix the corrupt image so later once you finish the first step of booting to the phone then you can flash to global rom. if you have the cn version 2.27 boot.img then you can download the adb and use the command to fix the phone
Shouldn't have messed with something that wasn't broken. Now you have a nice brick to use as a paperweight. Hope you get it fixed tho. Good luck.
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
SuperDroidMe said:
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
Click to expand...
Click to collapse
Congrat you finally fix it
Hows your phone?..Did it work.