Related
Android One Universal STOCK ROMs [MM/LP]
These ROMs were dumped using the command "dd", 100% Stock without any modification.. These roms were put together for users who wants to fall back to google stock rom, And also for users who are having issues while installing the latest OTA. Nothing is removed from the original rom, and all signatures are intact. And Lastly, please take the time to read the instructions, FAQ, carefully and thoroughly before proceeding....
List of devices with known compatability
Code:
[CENTER][SIZE="4"]Cherry Mobile One G1 (Philippines)
General Mobile 4G (Turkey)
I-Mobile IQ II (Thailand)[/SIZE][/CENTER]
DOWNLOAD
[ AFH | DRIVE ]
FLASHING PROCEDURE :
Download the ROM
Move the file to internal storage
Reboot to TWRP custom recovery
Backup your current ROM (just in case)
Locate the file and install
Reboot and have patience while it boots up... It will take about 15-20 minutes
In case you want to fall back to stock recovery, ensure that "MOUNT SYSTEM PARTITION READ-ONLY" is enabled from the twrp MOUNT section prior to installation, otherwise uncheck it
Click to expand...
Click to collapse
FASTBOOT METHOD
Extract all the images to adb folder and ensure that USB Debugging is enabled.
Code:
#! adb reboot bootloader
#! fastboot flash system system.img
#! fastboot flash boot boot.img
#! fastboot flash modem radio-modem.img (For Marshmallow MRA58Y Rom only)
#! fastboot reboot
Frequently Asked Questions :
1. Is it compatible with my device?
Yes, as long as you are using an Android One 2nd generation [seed] with a qcom 410 processor (msm8916).
2. Will I still be able to recieve the official OTA updates in the near future?
Yes, as long as you've never rooted, changed recovery, or any other modification on your system.
In case you have rooted your device, all you have to do is reflash the ROM when a new ota arrives and you'll be fine
3. Do I need to Wipe my Data and cache partitions before attempting to install the ROM?
No, but it is recommended especially if you are having too many apps FCs
If you are having apps FCs, try clearing the app data of the affected app, or try hard reset.
If all else fail, do a clean install.
4. Got stuck with "Patching system image unconditionally"?
It might be a bad download
Always verify the hash prior to proceeding (check the howto verify the MD5sum below)
Wipe the system partition just in case
MD5 Signature
How to Verify the MD5 signature?
If you are running Windows just download HashTabs and install. Right click on the downloaded file then click properties and look for "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip". On your phone, just use ES explorer and then click properties then tap "Show Checksum" then compare the md5 hash. If the file hashes are identical you are good to go, Otherwise, redownload the file again due to bad probably.
[MRA58Y] efa811732dd54ccdbe73a4cb8bdb085c
[LUZ56M] 5a58c232a6e5667c123236175a070a7e
Flash at your own risk :good:
MISC
Code:
[CENTER][URL="https://goo.gl/j7F8Mz"]DRIVE[/URL][/CENTER]
reserved 2
reserved 3
Thanks a lot for this. I will test it now and will let you know.
kiksilog said:
Thanks a lot for this. I will test it now and will let you know.
Click to expand...
Click to collapse
:good: :highfive:
General Mobile 4G Dual
1cefire said:
:good: :highfive:
Click to expand...
Click to collapse
General Mobile 4G Dual support?
My G1 is now running Marshmallow. It did took awhile on the boot screen but other than that :good:
Thanks again!
kiksilog said:
My G1 is now running Marshmallow. It did took awhile on the boot screen but other than that :good:
Thanks again!
Click to expand...
Click to collapse
Rom files is'nt enough folders, not even as work general mobile 4g , I have already My work is turkish forums . he doesn't come back lolipop
Anyone has the stock rom for lava pixel v1 (2nd gen android one)??india
JaxaPRO said:
General Mobile 4G Dual support?
Click to expand...
Click to collapse
Yes
kaankulahli said:
Rom files is'nt enough folders, not even as work general mobile 4g , I have already My work is turkish forums . he doesn't come back lolipop
Click to expand...
Click to collapse
Although we had different Lollipop rom build no., our device and roms are basically the same. Since Android M arrived we all share the same build numbers. How did I know this? By verifying the MRA58Y ota and comparing all the hashes including the radio-modem.img I found out we all share the same Android M stock rom. And lastly, the MRA58M ota will not touch any other partition other than the system, boot and modem, so basically, all you need is the system.img, boot.img and radio.modem.img to be able to update to Android M. The rest of the partitions are useless when it comes to updates
sourav4ganguly said:
Anyone has the stock rom for lava pixel v1 (2nd gen android one)??india
Click to expand...
Click to collapse
Sorry dude, I cant provide you the stock rom for Lava Pixel v1 since I dont own the device.
@1cefire
Can your TWRP files found here
androidfilehost dot com/?w=files&flid=43419
be used to root Marshmallow?
if yes, which one to use? (i.e. blue, classic, darkplay)
thanks.
@kiksilog
Any recovery will do as long as it runs on this device. Unfortunately, Marshmallow requires a permissive kernel, so far no one has manage to build an insecure kernel for seed without any issue. Even the latest beta supersu with a modded sepolicy boot.img failed to boot. Android M for seed is unrootable for now, hopefully supersu will get an update to support our latest OS
Oi
Android Marshmallow 6.0.1!!!
In case someone might consider upgrading to Android M 6.0.1 MMB29K
- install it via custom recovery philz / twrp / fastboot (visit the first page for more info)
- the rom contains system.img and boot.img only (the only partitions required to upgrade)
- the rest of the partitions were removed and will be provided separately for each device
Huge thanks to @dabotsonline for the link
How about posting the download url of the OTA update 6.0.1 file which I understand is only less than 90 mb? Thanks.. :fingers-crossed:
1cefire said:
Android Marshmallow 6.0.1!!!
In case someone might consider upgrading to Android M 6.0.1 MMB29K
- install it via custom recovery philz / twrp / fastboot (visit the first page for more info)
- the rom contains system.img and boot.img only (the only partitions required to upgrade)
- the rest of the partitions were removed and will be provided separately for each device
Huge thanks to @dabotsonline for the link
Click to expand...
Click to collapse
Wow, very helpful (Y)
1cefire said:
Android Marshmallow 6.0.1!!!
In case someone might consider upgrading to Android M 6.0.1 MMB29K
- install it via custom recovery philz / twrp / fastboot (visit the first page for more info)
- the rom contains system.img and boot.img only (the only partitions required to upgrade)
- the rest of the partitions were removed and will be provided separately for each device
Huge thanks to @dabotsonline for the link
Click to expand...
Click to collapse
are you a time traveler?
Yeah everybody. We already made it before google ????.
Wileyfox Swift cihazımdan Tapatalk kullanılarak gönderildi
@1cefire can i install it in aq4501???
** BRICK WARNING/Disclaimer/Requirements **
>> Only flash with unlocked bootloader <<
>> Scripts are released under GPlv2 license <<
>> Run at own risk <<
Hi,
I patched the TWRP 3.0 recovery from faust93 to include important partitions
that make switching between different versions of Android/Ubuntu very simple.
All partitions are properly added to the fstab, but out of fear that some of
you will brick your device i disabled most of them.
Next version will contain a backup of all unique partitions, but i will have
to test this thoroughly.
Steps to install:
1. Download the zip file from attachments below
2. Unpack the zip file
3. Check checksum with md5sum -c *.md5
4. Put phone into fastboot mode (boot device with [vol-] and [power] button)
5. Flash recovery with:
# fastboot flash recovery TWRP_3.0_m86_patched_st0rm77.img
# fastboot reboot
then boot the device with [vol+] and [power] button, to enter recovery
[Requested by @p82maarj]
Already on an older TWRP version ?
- Flash "update_TWRP_3.0_m86_patched_st0rm77.zip" from TWRP
or
- Unpack the zip and flash the recovery manually in TWRP by selecting "install image"
Enjoy
Warning:
** If you flash an official update.zip from Flyme, remove bootloader, ldfw & recovery from ZIP**
** Otherwise you'll find yourself with a locked bootloader **
Hi @st0rm77
Thanks for your contrubution!
It will be good if you create a flashable zip of your new recovery. It can be flashed directly from the stock recovery or from the other twrp recovery without entering in fastboot.
Furthermore to have a flashable zip is usefull to flash a new rom update. For updating the new rom version I enter in TWRP, flash rom zip, flash unlocked bootloader zip and flash TWRP zip.
I attach the other flashable TWRP zip you can based on (only replace recovery.img by your recovery.img).
Hi @p82maarj,
Thanks, as per your request, i added an update_TWRP_3.0_m86_patched_st0rm77.zip . This is directly flashable from an older TWRP.
I added some extra verification so people dont end up with a corrupt recovery.
Enjoy
(in order not to confuse people to much, can you remove your download)
Personally I like android as OS, I don't wish to try Ubuntu, in my case it's useful to update my "old" TWRP by Faust93 with this one ?
PYCON said:
Personally I like android as OS, I don't wish to try Ubuntu, in my case it's useful to update my "old" TWRP by Faust93 with this one ?
Click to expand...
Click to collapse
Yeah, you get some extra abilities:
- Backup of Boot Logo
- Backup of Device Tree
Now you can backup/restore in TWRP without manually flashing dtb (device tree) in order to switch between Flyme, AICP, ResurrectionRemix or Ubuntu.
Thanks for everything you've been releasing, great work!
st0rm77 said:
Hi @p82maarj,
Thanks, as per your request, i added an update_TWRP_3.0_m86_patched_st0rm77.zip . This is directly flashable from an older TWRP.
I added some extra verification so people dont end up with a corrupt recovery.
Enjoy
(in order not to confuse people to much, can you remove your download)
Click to expand...
Click to collapse
Done Thanks!
st0rm77 said:
** If you flash an official update.zip from Flyme, remove bootloader, ldfw & recovery from ZIP**
** Otherwise you'll find yourself with a locked bootloader **
Click to expand...
Click to collapse
Sorry for the stupid question but it's just to be sure. I should remove the file named "bootloader" or the one named "boot.img"? Or both of them?
Thank you very much!
Another little question... What's the difference from 2 ZIP files ? Older one and updated ZIP ?
PYCON said:
Another little question... What's the difference from 2 ZIP files ? Older one and updated ZIP ?
Click to expand...
Click to collapse
I know the answer to this one!
The first zip contains the img file that you can flash using fastboot.
The second (update) zip is the one you need if you already have (an older) TWRP and you wish to update to this version (use it from inside TWRP).
abePdIta said:
Sorry for the stupid question but it's just to be sure. I should remove the file named "bootloader" or the one named "boot.img"? Or both of them?
Thank you very much!
Click to expand...
Click to collapse
boot.img is your boot partition, you need this one :good: (NEEDED)
bootloader is the locked bootloader from meizu, avoid this one as the plague (AVOID)
Dont brick your device, check everything carefully :fingers-crossed:
st0rm77 said:
Dont brick your device, check everything carefully :fingers-crossed:
Click to expand...
Click to collapse
Thank you very much! I will be careful in the future, I promise!
i follow the a to I tutorial
then unlock bootloader
then this
now when i conect meizu to pc i try to pass custom rom to internal memory and the phone restart
what is the problem
---------- Post added at 10:35 PM ---------- Previous post was at 09:56 PM ----------
managed to download the rom in phone browser now i have RR and all it´s ok
I flash stock recovery ( use update 5.1.10.0g) but not success, hÃc hÃc, help me restore stock recovery, many thanks!!!!
st0rm77 said:
Now you can backup/restore in TWRP without manually flashing dtb (device tree) in order to switch between Flyme, AICP, ResurrectionRemix or Ubuntu.
Click to expand...
Click to collapse
Just to be sure I understood :
Going from Flyme to CM :
-Backup Flyme (system+data+dtd)
-Flash CM archive
Going back to Flyme
-(optional) Backup CM (system+data+dtd)
-Restore Flyme (system+data+dtd)
Is there is a quikier way ?
TWRP 3.1.0.0 is out... It's possible to port it for our PRO5 ?! :silly:
help
hi .i change meizu pro 5 from china to national (5.6.1.19 daily )and unlock it and flash recover TWRP 3.0 but not login it the recovery .
i want updated
PYCON said:
TWRP 3.1.0.0 is out... It's possible to port it for our PRO5 ?! :silly:
Click to expand...
Click to collapse
I too vote for a port!
3.1.1 was released
munky-head said:
3.1.1 was released
Click to expand...
Click to collapse
Not for PRO5
Code:
[B]NOTE : [/B]PROCEED AT YOUR OWN RISK. Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues.
If already on Stock Rom then visit THIS THREAD for OTA updates.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - TWRP_Stock_v340.zip from this post.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
Users coming from Android Pie reported microphone issues - in case you face it then flash DolbyPlus-Oreo_8.1.zip from THIS post via Magisk which might resolve the issue.
(optional) If you want to boost up by debloating then use this MOD.
(optional) If you want to boost up BATTERY then use this GUIDE.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP : https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.
To ROOT the ROM
Flash Magisk from TWRP and you will have root access
Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......
piku2008 said:
Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......
Click to expand...
Click to collapse
Did you performed factory reset and flashed ROM & decrypt.zip
The TWRP survives the flash and Magisk can be flashed to Root the ROM but after above two files are flashed.
Well I successfully flashed ROM after complete factory reset with internal memory tooo ......
But some how TWRP got replaced with factory default (the one with root checker) with bootloader unlocked screen
Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available
Aftab_khatri said:
Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available
Click to expand...
Click to collapse
Will do
Thank You bro.. Your Guide has tested successfully from AOSiP build to stock ROM 309.. [emoji16]
Sent from my [device_name] using XDA-Developers Legacy app
AOSP to Stock
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...
jroviel18 said:
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...
Click to expand...
Click to collapse
Great .. Sorry could not reply earlier but you got the resolution of the query.
For subseqeunt update with TWRP intact .. please follow this guide in future .. https://forum.xda-developers.com/as...to/rom-update-stock-firmware-keeping-t3808269
Update - WW-15.2016.1805.311
Updated Stock ROM file - TWRP_Stock_v311.zip now avaliable.
For those who are already on stock ROM,
The instructions to flash are in THIS POST.
For those who are on custom ROM,
The instruction to flash are in THIS POST
Do these zips format internal storage or not ??
aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
No
aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
I believe this is the exact same firmware as the official one. It is just modified to work with TWRP. Nothing more, nothing less.
aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
You will have to format data (i.e. factory reset) but the Internal Storage will be safe.
aaa
Work For Max Pro M1 ?
This rom XOOT not XOOTD
---------- Post added at 11:26 AM ---------- Previous post was at 11:07 AM ----------
.A.V.i.n.a.S.h. said:
Code:
[B]NOTE : [/B]Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues. BUT still proceed at your own risk.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - Stock_X00T_Patch_May_Version_311_TWRP.zip.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
This will update your firmware to WW-15.2016.1805.311 to have updates after this follow THIS THREAD.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
Click to expand...
Click to collapse
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english
arielrizuly said:
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english
Click to expand...
Click to collapse
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.
.A.V.i.n.a.S.h. said:
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.
Click to expand...
Click to collapse
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.
Abby 244 said:
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.
Click to expand...
Click to collapse
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.
.A.V.i.n.a.S.h. said:
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.
Click to expand...
Click to collapse
No response even in fastboot.
I download the stock fastboot rom in hope to find the stock recovery.img. But there is no recovery.img name on it. Wonder whats the image name for the stock recovery. Or any of you guys can upload the stock recovery ?? Thank you so much!
If you're trying to return a 10s to stock you don't need an .img file you either need the .tgz fastboot file or the recovery file .zip, using the xiaomi tool. Both versions are available on the official Xiaomi mi site. All the info you need is here:
https://c.mi.com//miuidownload/detail?device=1900397
pumpkin072618 said:
I download the stock fastboot rom in hope to find the stock recovery.img. But there is no recovery.img name on it. Wonder whats the image name for the stock recovery. Or any of you guys can upload the stock recovery ?? Thank you so much!
Click to expand...
Click to collapse
the recovery is inside the boot.img, so you'll need to reflash the boot image
stuntdouble said:
If you're trying to return a 10s to stock you don't need an .img file you either need the .tgz fastboot file or the recovery file .zip, using the xiaomi tool. Both versions are available on the official Xiaomi mi site. All the info you need is here:
https://c.mi.com//miuidownload/detail?device=1900397
Click to expand...
Click to collapse
I am already on stock and i also downloaded the .tgz file. I just want to extract the recovery.img from the downloaded .tgz file but no recovery.img named on it . I want to revert from twrp to stock recovery without losing any data.
J6idot said:
the recovery is inside the boot.img, so you'll need to reflash the boot image
Click to expand...
Click to collapse
Ok i see boot.img. Weird. As i watch other videos, their recovery.img was named recovery.img. Anyway, can i directly flash it tru twrp?
pumpkin072618 said:
Ok i see boot.img. Weird. As i watch other videos, their recovery.img was named recovery.img. Anyway, can i directly flash it tru twrp?
Click to expand...
Click to collapse
i think new devices that shipped with android 11 now use boot image for recovery? anyways to flash it go in twrp --> advanced --> install kernel and select the kernel
J6idot said:
i think new devices that shipped with android 11 now use boot image for recovery? anyways to flash it go in twrp --> advanced --> install kernel and select the kernel
Click to expand...
Click to collapse
Thanks bro. Already done flashing.
Install kernel don't work though. I just directly flash it as image. Anyways, thanks alot bro. You're really a big help in this group!
So i've tried modding it 3 times, soft bricked all times, can anyone provide a solid guide?
What was your procedure?
thomaskmaagaard said:
What was your procedure?
Click to expand...
Click to collapse
i don't remember since it's been around like a year since i last tried, but i think it was a bad rom.
Check build number in "About phone" and find the corresponding ROM here
thomaskmaagaard said:
Check build number in "About phone" and find the corresponding ROM here
Click to expand...
Click to collapse
do you have a guide on how to flash it and root?
Extract boot.img from firmware (google "android firmware extractor)
Move boot.img to phone and patch image via magisk
Move patched image back to PC and flash with fastboot flash boot patchedboot.img
thomaskmaagaard said:
Extract boot.img from firmware (google "android firmware extractor)
Move boot.img to phone and patch image via magisk
Move patched image back to PC and flash with fastboot flash boot patchedboot.img
Click to expand...
Click to collapse
can you link an extractor or is that not allowed?
Zeooxxx said:
can you link an extractor or is that not allowed?
Click to expand...
Click to collapse
I could, but don't really have a link to whatever one i downloaded on my PC ages ago. I just go to google and pick the first one that works with Windows. You'll usually need Python installed and remember to read the instructions for the extractor closely or you might end up with missing requirements for the script.
You can also try your luck with looking for pre-patched images on the web. The ROM repo post and the general help board will usually have people asking for pre-patched boot images. See if anyone has uploaded one matching your build number, region AND update version.