Well my Note's earpiece speaker was sorta blown so I gave it to the service center for repair and also the screen had reddish spots, and now I got my note back after 3 days and they say everything in the phone has been replaced, including the earpiece, PCB and the screen.
The phone was flashed with stock ICS. LP8. However I noticed something very strange when I installed the screen filter app. Please try the following steps and lemme know if it happens with you as well:
1. Enable screen filter app.
2. Try to install any program from .apk file.
3. Now I am unable to tap the install button, can only tap the cancel button. If I disable the screen filter app, the install button works as normal.
ankydu said:
Well my Note's earpiece speaker was sorta blown so I gave it to the service center for repair and also the screen had reddish spots, and now I got my note back after 3 days and they say everything in the phone has been replaced, including the earpiece, PCB and the screen.
The phone was flashed with stock ICS. LP8. However I noticed something very strange when I installed the screen filter app. Please try the following steps and lemme know if it happens with you as well:
1. Enable screen filter app.
2. Try to install any program from .apk file.
3. Now I am unable to tap the install button, can only tap the cancel button. If I disable the screen filter app, the install button works as normal.
Click to expand...
Click to collapse
Its a well known issue :/ But at least you noticed XD Alot of people cant work out why they cant install anything and its because screen filter is on
Hello Everyone!
So i'm really stuck over here. I have an international Samsung Galaxy Note N-7000 that is working but with a black screen!
First of all i want to discuss exactly what i have done:
1.i had a problem with the charging port where it works sometimes and most of the times doesn't. So i decided to order a new charging port to replace the existing one.
2. When i received the new charging port i instantly started to dissemble the device (The device was working perfectly before starting replacement)
3. After i removed the old one and installed the new, i turned on the device and it showed only a black screen, then after some time i saw the touch buttons light, but still the screen is black:crying:
4. so i decided to return back the old charging port and this time when i turned on the device it sounded like it's booting and working but still with a black screen. The phone even received call and the touch screen is working but with black screen.
What do you guys think has just happened to my phone? could the new charging port cause any problems with the motherboard?
i'm really stuck and don't wanna go to a service center
I have recorded a video of the problem. Please see it below
since i'm new over here, i'm not allowed to post youtube link.
please head to youtube and type my username and watch the video : nadeaa0a
thank you very much
My younger brother always liked to disassemble things with a hammer wondering after why it wasn't possible to assemble it the other way around.
It took him a few years to understand that real knowledge of things is a clear advantage.
Go to a service center and get help from a professional instead of making it ...
Sent from my GT-N7000 using xda premium
maybe you disconnected the wire you were changing ports ! don't worry and don't freak out just take to any shop and they will check it i don't think the screen is burnt because if it was it would be more expensive ! go to any shop and ask them to change ports and check the screen
for what you described, my best guess would be either you unplugged the lcd and didnt plug it back in properly.... or you damaged the flex for the lcd... the charging flex wouldnt cause the problem... just inspect the lcd flex and plug for damage... if no visible damage plug it in again and try it again... lets hope its just not plugged in right...
I have the same problem
Hi,
I have the same problem. I had never disassembled my phone and the screen slowly turned purple and started blackening out. It was fully functional. This I knew because I connected it to my Windows 7 computer and used Android Commander. I ordered a new screen complete with bezel etc. I have two batteries, the first didn't even charge after I put it in the phone (it had drained totally during the wait for the new screen), the second was partially charged and allowed the screen to boot. It is however behaving like the first screen did before it went black, that is purple. I am sure I have not done anything wrong with the connections. Could it be the batteries? or the adapter flex? I just hope it is not the mainboard. It is not on warranty and we don't have that many honest phone specialists around where I live. I am almost sure others have experienced the same problem and someone on xda knows what the problem is. If you do I would be indebted.
nadeaa0a said:
Hello Everyone!
So i'm really stuck over here. I have an international Samsung Galaxy Note N-7000 that is working but with a black screen!
First of all i want to discuss exactly what i have done:
1.i had a problem with the charging port where it works sometimes and most of the times doesn't. So i decided to order a new charging port to replace the existing one.
2. When i received the new charging port i instantly started to dissemble the device (The device was working perfectly before starting replacement)
3. After i removed the old one and installed the new, i turned on the device and it showed only a black screen, then after some time i saw the touch buttons light, but still the screen is black:crying:
4. so i decided to return back the old charging port and this time when i turned on the device it sounded like it's booting and working but still with a black screen. The phone even received call and the touch screen is working but with black screen.
What do you guys think has just happened to my phone? could the new charging port cause any problems with the motherboard?
i'm really stuck and don't wanna go to a service center
I have recorded a video of the problem. Please see it below
since i'm new over here, i'm not allowed to post youtube link.
please head to youtube and type my username and watch the video : nadeaa0a
thank you very much
Click to expand...
Click to collapse
it shows as color black, or nothing (like locked device)? I used to face this problem too with my infuse 4G, but it was because of installing custom rom. Had problem with few rom i installed but nothing happen on my stock one. If your device is just not lighting up(like locked device), then i guess because of ROM, but i'm not sure yet. But if it shows "color black", then i don't know.
THIS IS NOT A SOFTWARE BUG. Its the Screen flex or the ribbon. Disassemble the back part, and take a look at the flex or the ribbon connector of the screen, clean the conector with a tooth cleaner with alcohol and let it dry for a few minutes. Put it back on and mount the back part again. Test it, it should work.
Same thing here: changed the usb port, booted fine, had issues with the sim, turned off took it apart again to check, put it back on and black screen.
Yea having the same issue here, dismantling the usb module and put in new one, power up black screen!! The menu and back button did lights up, and the phone is working too, can hear the booting tone, anyone got any solution for that yet?
jasonhs said:
Yea having the same issue here, dismantling the usb module and put in new one, power up black screen!! The menu and back button did lights up, and the phone is working too, can hear the booting tone, anyone got any solution for that yet?
Click to expand...
Click to collapse
You damaged your LCD flex cable or didn't plug it in correctly ..
N00b... said:
You damaged your LCD flex cable or didn't plug it in correctly ..
Click to expand...
Click to collapse
I have unplugged and replug back few times, same result. Guess most probably i have damaged the flex cable. Replacement part seems too pricy to change, rather buy a new phone.
Sent from my GT-P6800 using Tapatalk
Hello,
I know a lot of us are having problems with displays and digitizers and im wondering if anyone else has this problem. Yesterday i replced my screen because it had a dead zone. I booted up the phone and everything worked great until i locked the screen. When i pressed the power button to unlock it there was just a black screen with lots of white lines forming. Without fail the phone will do this. I restart and its fine but when i lock it, it gets screwy. I really need to get this working since i dont even have a backup phone right now. By the way the display is not oem its a knockoff.
Since you change your LCD....it might be a different panel from your original. Check your kernel or flash the kernel again.
Sent from My LG G2 LS-980 or LG G Pad 7.0 V400
Same thing happen to me about a month ago during my G2 screen repair. I bought mine on ebay from a seller that had sold hundreds of them, figured I couldn't go wrong. Unfortunatly I never figuered out why it was failing and just ended up returning it for a refund. The second screen I bought was from etradesupply and it worked perfectly. Hopefully someone has a fix for this weird issue.
I had that exct thing happen to me, well rainbow colored lines. I shattered the screen on a corner drop. I took it to Gopher Mods, they replaced the screen and within a few minutes it happened. They replaced it 2 more times and eventually the last time the screen popped out a little bit since they did not add enough glue/sticky tape inside and the lines dissapeared. They also gave me a full refund, with which I got another G2. So two working phones now lol.
Basically the screen might be pressed in too tightly causing the cable inside to be kinked too much. Its very easy to damage the video cable in this phone mind you.
Bmatthews11 said:
Hello,
I know a lot of us are having problems with displays and digitizers and im wondering if anyone else has this problem. Yesterday i replced my screen because it had a dead zone. I booted up the phone and everything worked great until i locked the screen. When i pressed the power button to unlock it there was just a black screen with lots of white lines forming. Without fail the phone will do this. I restart and its fine but when i lock it, it gets screwy. I really need to get this working since i dont even have a backup phone right now. By the way the display is not oem its a knockoff.
Click to expand...
Click to collapse
Try installi mg dorimanx's kernel which detects your panel type of search the thread for a kernel swap flashable. Your new panel may be of a different type causing the white lines.
Hello for this morning I have a black screen on my Lg G Watch R, while she always is to connect to the mobile she vibrates when I receive a notification but an impossible to relight the screen.
Even problems as this videos : youtube.com/watch?v=64R9HbU9zNE
Thank you for your help
And sorry for my bad english.
Blank screen on my LG G watch R
My watch suddenly went blank. Its still connected to my phone and still vibrates when i get notifications. I tried long press on the crown to restart it only vibrates but still the screen is blank. What went wrong. Please help. Thanks...
I experienced the same problem a few days ago. My watch has worked great for a year and just died overnight on the charger. It was working the night before, and now there's no display. It's connected but the touch screen isn't working either. I can take a wearable screenshot and see my watch face and that's it. The LG warranty says 1 year, and I'm right at the limit. I haven't seen any successful fix for this so I suppose I will give them a call and see if they'll help.
Well I couldn't find any known fix for this issue so it looks like the display actually died. I did find one small place in the bottom right of my screen that was still responding to touch inputs, so with that and a lot of wear screenshots I may be able to get to the settings menu and factory reset. I contacted Google (I purchased from the Play Store) and they are shipping me a replacement.
Hey guys!
So I'll put a video of my cellphone and how the problem looks like right below.
Last week I installed a few apps from Play Store for studying and after a while the phone screen started to behave with a glitch: It started to flash some vertical lines and sometimes parts of the screen are placed in other places. If I touch the screen where an icon used to be but due to the glitch it is in another place of the screen the app opens normally. Like this glitch is more about an illusion. Sometimes the whole screen can go black or white and then it turns off. Sometimes the colour scheme is inverted. (In the video you can see itbetter)
When I try to turn on the screen again by pushing the Power Button the screen can blink quickly so I can't unlock it.
I saw a lot of things on internet but actually nothing really helped me. I suspected that it was a kind of virus but I changed the ROM 3 times (flashing Android 6.0 Marshmallow, Android 5.0 Lollipop and Android 4.4 KitKat) and the problem still haunts me. When I'm setting the cellphone up the screen is OK and everytime I can open an app this glitch stops. (As you can see in the video) But when I go to the home screen this glitch starts immediatly.
I've heard that it has to do with the battery or it is a hardware problem. But I don't know why this problem only happens in the home screen. On fastboot screen the screen is OK too.
I'm trying this forum really hoping that someone appears with the solution. Thank you so much!
P.S.: If the embeded video isn't working, please, paste this link: https://www.youtube.com/watch?v=yMHhhL1JHj4