Related
Hello!
First sorry if my English is basic, because im French ^^
Yup, so i open this thread cuz i want to be sure to find the right version before install Xposed on my phone.
I found that i need SDK23 on web but i dont know if it's right and if it's a ARM or ARM64 and im really not sure then i prefer ask here before make a bull****
I'm actually on Meizu Pro 6 (not Pro 6 plus) on last Flyme 6.3.0.0G (but i use Nova Prime launcher) and my phone is rooted from Meizu roots setting.
(Edit: it's Android 6.0, Processor is a "MTK MT6797" and Graphic chip "ARM Mali T880 MP4")
I want to install Xposed to use the advanced setting from some of my apps like Greenify and take a look to the other possibility but before install Xposed i want to know something, actually (if necessary) i can flash my meizu with recovery mod to come back to factory without any problems (i already make it after roots to make a fresh install with unrooted flyme) so i wanna ask, if i install Xposed can i still use recovery mod if needed a day?
Thanks in advance and sorry if the answer was already on this forum, i have search but don't find for Pro 6
Click to expand...
Click to collapse
Back & hi,
Ok so if someone look a day for the same thinks, i have find the solutions and the answer to all my question on the Meizu groups by ChatDexter on Telegram.
So for the Meizu Pro 6 (not plus) you just need to roots your phone with the simple way of Flyme :
* It's 100% safe and easy and you still can use recovery mode (press power+up volume to start your phone and when vibrate, press 2 time volume up to open recovery) after reboot to unroot if needed one day don't be afraid..
And if you don't know how to root the Meizu Pro 6 it's very easy :
Open "Parameter" and go to -> "Fingerprints and security" then enter and follow step on "Administrator authorization" read/accept and reboot; after that you will be roots (you can use the free apps Root Checker Basic) to see the roots work fine..
Ok so now for xposed framework you need XposedInstaller v3.1.1 (APK), there is the link :
[add manually the SSL]mega.nz/#!SI0DwJoY!kgbtYOZScUfub7aPVLu7s9t7qwL4MsG7Ga-DhHEnSWQ
*receive directly from an admin of Meizu groups of Telegram and upload to my mega.
(EDIT : im new on forum and after writing all my post i see than i can't post a link after post minimum 10 msg with my account to previent spam.. i understand but for this post it's really sad.. than im sorry, but to post link i have remove the https : // before my 3 link of the post, just add it manually to open it and i hope xda moderator will undertand and i hope fix it , if not sorry im new on xda.. if someone need the link add me on Telegram at "Orbit4L")
*And im not 100% sure but i thinks it's only for the Meizu Pro 6, in any case it work perfectly for my Pro 6 (with flyme 6.3.0.0G rooted).
Ok so after download, you just need to launch the apk, the installer will automatically detect your device to find the last version of xposed framework, you must see that on "YOUR DEVICE" detection :
#1 Android 6.0 (Marshmallow, API 23)
# 2 Meizu PRO 6
#3 arm64
Click to expand...
Click to collapse
if you don't see that it's than you are not on Meizu Pro 6 so stop this tutorial immediately..
If it's okay first verify your battery level is ok (personally i have make that with 100% to be safe)
Then now you can press INSTALL/UPDATE button, a dialog box will appear, wait few time and after 3/4 line you will see "Done" (if it's not done it's than you have not pro 6 roots or make something wrong in the step, idk im not an pro but for me all was perfect the first try..)
Ok then now in the bottom of this dialog box you will see a message for reboot your system, wait the countdown or press reboot directly..
Your phone will reboot and when Flyme loading logo will appear dont worry if it take few min (not really long, i thinks 2/3max for me) and after that you will see a status 0->100% for xposed installer optimize your apps for xposed (just wait without make anything) and when 100% is done flyme will start just fine as always, unlock your sim/phone pass, and you will see your phone start as always with all your apps exactly like before start the XposedInstaller apk, but now, Xposed is installed and work fine
open it and you must see that :
[add manually the SSL]i.imgur.com/io5Tqo2.jpg
And here you can start using the application by adding your modules
For proofs here is my Greenify Pro plug-in finally installed and fully functional
[add manually the SSL]i.imgur.com/YjloCHS.jpg
Here, i know that many of you are perfectly comfortable with xposed, but for those like me who want to install it for the first time, (on a Meizu Pro 6 in any case) it can seem complicated and warnings can scare, that's why after a long search, then directly ask advice to Admin of Meizu groups from Telegram and then performed the procedure on my own Pro 6 (Not Pro 6 Plus^^), i decide to share this tutorial that i hope again will not violate no rules of the XDA Forum and give a big pleasure to interested people :good:
Looking forward android friends and thx to xda for this awesome Forum (even if i found the solution elsewhere, i know than Pro 6 is not on last phone and meizu not the best way for xposed :silly
I want to shoot in RAW on M31. Can anyone help me with this?
Some Problems I faced:-
1. I read that we can enable RAW support with TWRP
2. by enabling Camera2Api. Which requires ROOT. (don't have a reliable method NOW)
3. Samsung Enabled PRO mode in September update. But has not enabled RAW support.
~well I (not everyone ) don't need a PRO mode in Stock Camera because there are other apps (like Camera FV-5, Open camera, etc.)
4. The Gcam mod works sometimes and sometimes crashes.(it's totally a mess)(well if the Zcam dev is seeing this, I am still grateful to you as you made a mod that sometimes works .its better than nothing)
if anybody helps me in this regard then I will be thankful
GreateProtim said:
I want to shoot in RAW on M31. Can anyone help me with this?
Some Problems I faced:-
1. I read that we can enable RAW support with TWRP
2. by enabling Camera2Api. Which requires ROOT. (don't have a reliable method NOW)
3. Samsung Enabled PRO mode in September update. But has not enabled RAW support.
~well I (not everyone ) don't need a PRO mode in Stock Camera because there are other apps (like Camera FV-5, Open camera, etc.)
4. The Gcam mod works sometimes and sometimes crashes.(it's totally a mess)(well if the Zcam dev is seeing this, I am still grateful to you as you made a mod that sometimes works .its better than nothing)
if anybody helps me in this regard then I will be thankful
Click to expand...
Click to collapse
No more news bro? Did gcam work?
GreateProtim said:
I want to shoot in RAW on M31. Can anyone help me with this?
Some Problems I faced:-
1. I read that we can enable RAW support with TWRP
2. by enabling Camera2Api. Which requires ROOT. (don't have a reliable method NOW)
3. Samsung Enabled PRO mode in September update. But has not enabled RAW support.
~well I (not everyone ) don't need a PRO mode in Stock Camera because there are other apps (like Camera FV-5, Open camera, etc.)
4. The Gcam mod works sometimes and sometimes crashes.(it's totally a mess)(well if the Zcam dev is seeing this, I am still grateful to you as you made a mod that sometimes works .its better than nothing)
if anybody helps me in this regard then I will be thankful
Click to expand...
Click to collapse
You cannot shoot RAW on Android 10 or above unless:
a) Samsung adds the feature (unlikely)
b) Google gives up the dynamic partitions (very unlikely)
c) You downgrade your phone to Android 9 or below. (which you can)
Disclaimer :
Code:
I am not responsible for any damage to your device!
Use this mod at your own risk!
What's this?
This mod increases the audio bitrate on video recording from a disgraceful 96kbps to a respectable 320kbps. Thus, giving a richer, more pleasing audio quality.
Still confused? Click here for a better explanation
Requirements :
- A rooted phone with magisk installed
- An opened mind (important!)
Contributors :
@Jt380p
@Slim K
* NOTES * (READ) :
- Not all ROMs are compatible with this mod, you might end up in a bootloop. YOU HAVE BEEN WARNED!
Download :
https://drive.google.com/file/d/1wr-p7puOL8nYb1wj1AyVbh9XmMp5kRKI/view?usp=sharing (Flash with magisk manager)
Source :
https://forum.xda-developers.com/Mi-9/themes/magisk-audio-bitrate-increase-t3927810
Audio files provided by @Slim K
Thanks to :
@Slim K
@topjohnwu for Magisk
Created : 7/11/2020
Last updated : 7/11/2020
reserved
Just tried it on stock MIUI with stock camera and Gcam. Works like a charm. Ty :good:
Slim K said:
Just tried it on stock MIUI with stock camera and Gcam. Works like a charm. Ty :good:
Click to expand...
Click to collapse
For me it works on Stock, but not on Urnyx05 GCam. Thanks Dev.
Lineage android 11 will benefit from it, or that is already implemented in them?
So which ROMs are not compatible?
Aki-to said:
So which ROMs are not compatible?
Click to expand...
Click to collapse
This mod uses magisk module template to replace a file in vendor folder. A tip for beginners using such a mod is to inspect it to know what it does. For example in the root of the module zip you will find the folder system, which has the needed folders/files path for replacement. If you open install.sh in text viewer, you would read the line :
Bash:
set_perm $MODPATH/system/vendor/etc/media_profiles_vendor.xml 0 0 0644
That should tell you which file it is and their permissions. Now open the same path on your ROM and look for that file, if it exists, then it should work. Although not every camera app (e.g gcam) uses that file.
Slim K said:
This mod uses magisk module template to replace a file in vendor folder. A tip for beginners using such a mod is to inspect it to know what it does. For example in the root of the module zip you will find the folder system, which has the needed folders/files path for replacement. If you open install.sh in text viewer, you would read the line :
Bash:
set_perm $MODPATH/system/vendor/etc/media_profiles_vendor.xml 0 0 0644
That should tell you which file it is and their permissions. Now open the same path on your ROM and look for that file, if it exists, then it should work. Although not every camera app (e.g gcam) uses that file.
Click to expand...
Click to collapse
Thanks, this was very helpful.
Indeed, it seems like a very easy set of scripts, did not expect that. However, the only thing I could not find is where the default functions are actually called, though I assume these are generic functions that are always called by Magisk, no matter which module is being installed.
This mod is also so extremely tiny, you could pretty much make these changes manually. Just take care of permissions and replace the file, that's it. It's even less complicated than working with /etc/fstab, it seems.
Perhaps I should release a couple of mods myself, if mod devs are getting such a Magisk Module template thing, anyway, which pretty much does all the work, already.
Aki-to said:
Thanks, this was very helpful.
Indeed, it seems like a very easy set of scripts, did not expect that. However, the only thing I could not find is where the default functions are actually called, though I assume these are generic functions that are always called by Magisk, no matter which module is being installed.
Click to expand...
Click to collapse
You assume correctly. The path to the functions can be usually found in /data/adb/magisk/util_functions.sh on your device.
Perhaps I should release a couple of mods myself, if mod devs are getting such a Magisk Module template thing, anyway, which pretty much does all the work, already.
Click to expand...
Click to collapse
Why write code twice when it already exists and works for everyone.
Hello, could someone please confirm if it works on firmware xiaomi eu 12.0.4. stable, thank you very much.
nike1973 said:
Hello, could someone please confirm if it works on firmware xiaomi eu 12.0.4. stable, thank you very much.
Click to expand...
Click to collapse
Yes it works
Thank you. Works on MIUI EU 12.0.6.
Eu 12.0.6, super stabilization (on stock camera) crashes when module is active.
I flashed it to the phone. The stock camera app still records audio at 127kbps. Does not save with 320kbps!.I use Indonesian stable miui 12/android 10. please Help!
Anyone tried on Xiaomi.eu rom?
Running 12.0.8.
Hi!
gkhnkaanyrtc said:
I flashed it to the phone. The stock camera app still records audio at 127kbps. Does not save with 320kbps!.I use Indonesian stable miui 12/android 10. please Help!
View attachment 5272691View attachment 5272693
Click to expand...
Click to collapse
Hi! I have the same problem ... Did you fix it? I use Miui 12.0.1 with Android 11
320kbps should be the default, I wonder why the f**k Xiaomi gives us 96kbps.
Does it work in Pixel Experience rom on Surya?
JBNCK One UI ExperienceGet the JBNCK One UI Experience on your Samsung Phone without root. Works best on Galaxy A-Series phones running Android 11 or 12Features- Debloated and clean (pleasant for the eyes, fun to use and allows for 2-day battery life)*
- Privacy (RethinkDNS [DNS + Firewall] and Privacy indicators included)**
- Degoogled*** (removed the majority of Google apps, replaced Play Store client [AuroraStore], possibility to add Nextcloud accounts [Nextcloud app required] or other accounts for contacts and calendar syncing, included Chromium)
- Advanced tweaking (SystemUI Tuner included)Installation ****For best results, make sure your device is freshly set up. If it isn't, create a backup (on anything but Google (WhatsApp backup is fine) or Samsung since those sync adapters will be removed) and perform a factory reset. Otherwise it may break your setup and you might end up with a chaotic system which defeats the whole purpose of the project xD
To start the installation, download the newest release and unzip the file. On your phone, make sure you have USB debugging enabled. After enabling USB debugging connect your phone to your computer via a USB cable and execute the script (there are 3 files, choose the one that suits your operating system). If you're on Linux, make sure to allow execution of the adb binary and the debloat script. If you have no idea what I'm talking about, just open a terminal in the extracted folder and execute the following command:
Code:
chmod -R 777 *
Download: https://github.com/JBNCK/One-UI-Experience/releases
GitHub repo (!!do not clone to use!! Use a release!): https://github.com/JBNCK/One-UI-Experience
GitHub profile: https://github.com/JBNCK
Website: https://jbnck.ml/
Based on: https://jbnck.ml/projects/android_modifikation/samsung-debloat-liste.html
TroubleshootingBootloopHope you backed up your data . Enter recovery mode and perform a factory resetHey some app isn't working!Ask me for help on XDA by posting a comment under the thread. Make sure to include information like:
1. What isn't working?
2. What device are you using?
3. Is there any error message that might help?
I will try to recreate the problem and send you a solution if i manage to solve itHey some app that I use is missing!Ask me for help on XDA by posting a comment under the thread. Make sure to include information like:
1. What app is missing?
2. What device are you using?
I will send you a command to get the app back since it has probably been removed by the script. I hope you know how to execute adb commands.Read this before you scream in the commentsSome features will get broken by the debloating process. This is completely normal so don't flip out when you see a settings toggle doing nothing. If you want to get a feature back, ask me.
* - battery life may/will depend on your phone model and installed apps
** - both need to be set up first. Also make sure to enable always on VPN for RethinkDNS
*** - critical system apps as well as Google Play Services cannot be removed without root. The script still installs GBoard (the lite version without stickers and unnecessary online content) and Google Messages (for a better RCS integration)
**** - adb will be blocked by MacOS by default. You can unblock it in the security tab in the settings app
Script tested on Galaxy A51 5G (SM-A516B), Galaxy A50 (SM-A505FN) and Galaxy Tab S6 Lite (SM-P610).
Works best on A-Series devices running Android 11 and 12 It is recommended to disable battery optimization for SystemUI tuner, Account Manager (syncing client for Nextcloud [Nextcloud app required] and other online accounts)) and Aurora Store. Also make sure to enable always on VPN for RethinkDNS.
Screenshots below.
Screenshots:To be added soonBugs:- Keyboard needs to be enabled manually (Settings > General Management > Default keyboard > enable OpenBoard)
Hello I just wanted to say that I love your one ui experience project and that I am the first person to ever star you're project on github.com and will probably be the first to contribute to your project on github.com.
You're script will also work from a Linux computer right?
I have just created a PR on github that fixed a flaw that was at the start of every single line of code in all 3 scripts I tested all 3 and they did literally nothing at all except show errors before this change to the scripts. Youre welcome. I look forward to contributing more to this amazing project in the future.
rkesh1 said:
Hello I just wanted to say that I love your one ui experience project and that I am the first person to ever star you're project on github.com and will probably be the first to contribute to your project on github.com.
Click to expand...
Click to collapse
Thank you, much appreciated!
rkesh1 said:
I have just created a PR on github that fixed a flaw that was at the start of every single line of code in all 3 scripts I tested all 3 and they did literally nothing at all except show errors before this change to the scripts. Youre welcome. I look forward to contributing more to this amazing project in the future.
Click to expand...
Click to collapse
If you're on Linux like me, you have to change the permissions to 755 (open a terminal in this folder and simply type 'chmod -R 755 *'). This will allow the script and the adb binary to be executed. The message "errors are normal just ignore them" refers to errors like "Package not installed for 0" which are completely normal since not every phone has the same bloatware. Thank you for contributing though!
rkesh1 said:
You're script will also work from a Linux computer right?
Click to expand...
Click to collapse
Yes, but you have to make it executable first
I've created a pull request on github that fixed an issue with your scripts
What about OneUI 4.1 on A51 A515F?
GalaxyA51user said:
What about OneUI 4.1 on A51 A515F?
Click to expand...
Click to collapse
The script mostly just uninstalls pre-packaged bloatware that comes with One UI and installs 4 to 5 new apps I ran it on my phone therefore it should also work on one ui 4.1
JanBoyGamer23 said:
Thank you, much appreciated!
If you're on Linux like me, you have to change the permissions to 755 (open a terminal in this folder and simply type 'chmod -R 755 *'). This will allow the script and the adb binary to be executed. The message "errors are normal just ignore them" refers to errors like "Package not installed for 0" which are completely normal since not every phone has the same bloatware. Thank you for contributing though!
Yes, but you have to make it executable first
Click to expand...
Click to collapse
Hello janboygamer23 I see on your readme on github it says that the experience would be bad if not run on a fresh install. I don't think that's true because all your script does mostly is uninstall tons of packages and install 4 or 5
rkesh1 said:
The script mostly just uninstalls pre-packaged bloatware that comes with One UI and installs 4 to 5 new apps I ran it on my phone therefore it should also work on one ui 4.1
Hello janboygamer23 I see on your readme on github it says that the experience would be bad if not run on a fresh install. I don't think that's true because all your script does mostly is uninstall tons of packages and install 4 or 5
Click to expand...
Click to collapse
The uninstallation of these apps is the problem. If you already have everything set up removing all of the bloat can break and mess some things like apps linked to google play for example paid apps, thats why its always better to run debloat script directly after the initial setup. Its really just a recommendation/warning and you can do what you want with it, just be advised that things may break
GalaxyA51user said:
What about OneUI 4.1 on A51 A515F?
Click to expand...
Click to collapse
A OneUI 4 version will be pushed in the next couple of days. Im running a private version of the script on oneui 4 and it works perfectly. I still need to do some adjustments and i will upload it on github soon
JanBoyGamer23 said:
JBNCK One UI ExperienceGet the JBNCK One UI Experience on your Samsung Phone without root. Works best on Galaxy A-Series phones running Android 11Features- Debloated and clean (pleasant for the eyes, fun to use and allows for 2-day battery life)*
- Privacy (RethinkDNS [DNS + Firewall] and Privacy indicators included)**
- Degoogled*** (removed the majority of Google apps, replaced Play Store client [AuroraStore], possibility to add /e/-account, included Ungoogled Chromium)
- Advanced tweaking (SystemUI Tuner included)
- Lightweight replacements for system apps
Click to expand...
Click to collapse
Hello JanBoy, good work!
But I would like to keep the Google Play Store (no AuroraStore). Could you make a version of it or say what does not have to be uninstalled (.bat) / installed (APK) in the script to have full Play Store access?
Many greetings
Frank
FBK2904 said:
Hello JanBoy, good work!
But I would like to keep the Google Play Store (no AuroraStore). Could you make a version of it or say what does not have to be uninstalled (.bat) / installed (APK) in the script to have full Play Store access?
Many greetings
Frank
Click to expand...
Click to collapse
You can execute the following command to get the play store back:
adb shell pm install-existing com.android.vending
After that, you can simply uninstall AuroraStore and you should be good to go!
New version coming today!Since I still go to school I wasn't able to actively work on the script but now that the school year is almost over, I can publish a new version which works for Android 12.
JanBoyGamer23 said:
You can execute the following command to get the play store back:
adb shell pm install-existing com.android.vending
After that, you can simply uninstall AuroraStore and you should be good to go!
Click to expand...
Click to collapse
Thank you for your "quick" reply.
But since nothing is happening in the A51-Scene with updated Custom-ROMs, I flashed the latest Stock-ROM (Android 12) and debloated it myself ;o)
FBK2904 said:
Thank you for your "quick" reply.
But since nothing is happening in the A51-Scene with updated Custom-ROMs, I flashed the latest Stock-ROM (Android 12) and debloated it myself ;o)
Click to expand...
Click to collapse
Sorry for being inactive for a bit, the school year is almost over and I had a lot of exams but I'm done now
New release!!!Major update to the script (One UI 4(.1) is now officially supported)!- Less stuff is getting installed (Messages, Keyboard and Weather are not being replaced anymore)
- More bloatware is getting removed
- Ungoogled chromium for Android has been abandoned so I replaced it with normal chromium, should still be more private than Chrome
- Animation speed adjustments
- /e/-Accounts have been replaced with DAVx5 to allow more nextcloud servers to be synced (Nextcloud app required)
Go check it out here:
Releases · JBNCK/One-UI-Experience
Development version of my One UI optimization tool featuring custom debloating by using presets and the ability to restore packages. - JBNCK/One-UI-Experience
github.com
What I'm currently working on:Making different scripts for different use cases (e.g. heavy debloat or light debloat, Android 11 or Android 12 etc.)
JanBoyGamer23 said:
What I'm currently working on:Making different scripts for different use cases (e.g. heavy debloat or light debloat, Android 11 or Android 12 etc.)
Click to expand...
Click to collapse
Hi! Can you make a script to debloat Samsung's official Android 11 firmware (Google Play Store remain) an to make NOT auto update to Android 12? No root. Thanks.
lexus46 said:
Hi! Can you make a script to debloat Samsung's official Android 11 firmware (Google Play Store remain) an to make NOT auto update to Android 12? No root. Thanks.
Click to expand...
Click to collapse
Yes thats what I'm working on
JanBoyGamer23 said:
Yes thats what I'm working on
Click to expand...
Click to collapse
Thanks a lot. Waiting.
I tried about 10 or more methodes and got confused alot
How to get rid of that driver installation on thr startup of viper4android
I think that i need to put audio_effect.xml to vendor/etc
Bur there to get that file and how to past in there, ... Or maybe you managed to get viper4android workong on onepöus 10??!
Hakemblue said:
I tried about 10 or more methodes and got confused alot
How to get rid of that driver installation on thr startup of viper4android
I think that i need to put audio_effect.xml to vendor/etc
Bur there to get that file and how to past in there, ... Or maybe you managed to get viper4android workong on onepöus 10??!
Click to expand...
Click to collapse
It's selinux permissive needs to be toggled on to work from what I remember
[APP][Root][4.2+]SELinuxModeChanger v10.0 :: [24.07.2017]
Now opensourced under gplv3! GITHUB Get it in f-droid F-DROID page (v10 probably won't be there until release of stable gradle 4.0 and buildtools 26) Now available on the XDA Labs! XDA Labs page (UPD: somebody released a fork without changing...
forum.xda-developers.com
Doesn't work i have tried everything because the changed the locations and the XML file should make it to work but if you change the locations in the file they say it works but i didn't get it to work best leave it like this you can download the new app of viper4android you can get it from the play stor called wavelet
I have these same problem on my Pixel 6 Perfect working but on op10 always need to install driver :/ when i use selinux mode changer my phone pass safety net ?