Hey,
i just got the Xiaomi mi8 (Global Rom, MIUI 9.6) and noticed a thing with the display. If the brightness is under 40% (lower the problem gets more and more visiable, gets really bad at 10-15%) the black is starting to smear if next to a grey color. If i move a black part surrounded by grey over the screen the black smears into the grey. I also noticed there is a slight color gradient from left (dark) to the right (getting brighter).
I contected the shop i bought it from and they said they never heard of this problem. I googled the problem but got no resaults. The shop send me a new Xiaomi mi8 but guess what, the same problem occured on this new device too.
I tried to record a video but its really hard if the room is dark and the screen is at a low brightness but maybe you can see what i mean at the edges of the black parts if you look closely.
mi 8 screen recorded with a camera:
https://www.dropbox.com/s/gmgdthzthgm69dr/Black smear xiaomi mi8.avi?dl=0
https://www.youtube.com/watch?v=LkmipTa_PsY
I made a test pattern and attached it to this post. Would be really helpful if somebody could check this on his/her own mi 8 and leave feedback!
test pattern recorded with screenrecorder on mi 8:
https://www.dropbox.com/s/1fpxuybw664skgp/Screenrecorder_mi8.mp4?dl=0
https://youtu.be/qM5FsRYTgKw
Greetings
It's Normal for all oled or amoled screen.
gm007 said:
It's Normal for all oled or amoled screen.
Click to expand...
Click to collapse
Really? Hmm, than i have to look for a device with a good old LCD panel.
Absolutely normal, my old s7 did this too, its due to the fact that pixels are turned off when displaying black and it might take a fraction of a second to turn on resulting in this smear. Happens to all oled displays
I noticed that on my S10e, auto brightness doesnt work as well as it did on my Note 9.
Sometimes I have to manually turn down my brightness if I turn off the lights in my bedroom for example. Or if i turn on the lights, brightness stays on the same level. But if i turn off my phone display then turn it back on, the brightness is suddenly changed.
How well does it work for you guys?
destz0r said:
I noticed that on my S10e, auto brightness doesnt work as well as it did on my Note 9.
Sometimes I have to manually turn down my brightness if I turn off the lights in my bedroom for example. Or if i turn on the lights, brightness stays on the same level. But if i turn off my phone display then turn it back on, the brightness is suddenly changed.
How well does it work for you guys?
Click to expand...
Click to collapse
I have noticed that my S10e is slow to respond to ambient lighting
I have an S10 and to be honest it's hard to say if auto brightness is working how it should. Coming from an LG V30 this phone's display is significantly brighter and especially more apparent when using it in the dark. Even the darkest setting is too bright. I always check the level to make sure auto brightness is working as it should and I guess it is? Either that or it's stuck.
my only comment is that in totally dark room it does not go all the way down , it stays a little bit brighter than normal and than my old iphone x
talking about the s10+
Mohamad Gahed said:
my only comment is that in totally dark room it does not go all the way down , it stays a little bit brighter than normal and than my old iphone x
talking about the s10+
Click to expand...
Click to collapse
yeah same here, and the strange thing is that on my Samsung Note 9 & Samsung S7 it actually used to go all the way down in a totally dark room, but on this phone it doesnt for some reason..
It can take a bit for Adaptive brightness to learn what your favorite settings are like.
Yes, same here, I have s10 and in the dark auto brightness is near to half. Wtf?! I tried to calibrate, no chance. For sure this is a bug. If you go in *#0*# you will see it s writing uncalibrate light sensor
Devhux said:
It can take a bit for Adaptive brightness to learn what your favorite settings are like.
Click to expand...
Click to collapse
nah, on my Note 9 & S7 it worked as it should on the first day i got those phones
there clearly is a problem with adaptive brightness on the S10, anyone with the S10 who had another samsung phone previously will notice that
no, the auto brightness is trash. it sucks. it never gets bright enough even tho i've made adjustments literally daily. it sucks.
Charkatak said:
I have noticed that my S10e is slow to respond to ambient lighting
Click to expand...
Click to collapse
Yup. Same here. Maybe software update will fix this soon.
Even with factory reset it still happened.
Sent from my SM-G970U1 using Tapatalk
x1tymez said:
Yup. Same here. Maybe software update will fix this soon.
Even with factory reset it still happened.
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
I too did factory reset...at least we have tried
Different topic: I will wait for T-Mobile firmware one more day and may possibly return the device back to Samsung and keep my Pixel 2
Charkatak said:
I too did factory reset...at least we have tried
Different topic: I will wait for T-Mobile firmware one more day and may possibly return the device back to Samsung and keep my Pixel 2
Click to expand...
Click to collapse
I got my first update on unlocked version. Why return?
Sent from my SM-G970U1 using Tapatalk
x1tymez said:
I got my first update on unlocked version. Why return?
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
First reason: I want some T-Mobile features what unlocked doesn't provide natively and may require an extra app to function, but if before return window closes, I would be able to find a 100% firmware that would work, then I may not return the device.
Second reason: I don't like the fingerprint on S10e and maybe it is somehow better than S10's implementation, I still have to be more precise than Pixel 2 and other which had the sensor on the back.
Charkatak said:
First reason: I want some T-Mobile features what unlocked doesn't provide natively and may require an extra app to function, but if before return window closes, I would be able to find a 100% firmware that would work, then I may not return the device.
Second reason: I don't like the fingerprint on S10e and maybe it is somehow better than S10's implementation, I still have to be more precise than Pixel 2 and other which had the sensor on the back.
Click to expand...
Click to collapse
Interesting. I came from OnePlus 6t, the in displayed scanner suck kiwi balls. Everytime you switch screen protector you needed to rescan your finger. Lol.
Sent from my SM-G970U1 using Tapatalk
x1tymez said:
Interesting. I came from OnePlus 6t, the in displayed scanner suck kiwi balls. Everytime you switch screen protector you needed to rescan your finger. Lol.
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
Oh, that is not convenient at all. I think the manufacturers are pushing their limits to please customers with new designs/features which in reality hurt the quality of the devices we pay for
I have the S10 plus and the auto brightness seems to be functioning fine. Occasionally in the dark I get thrown off with how bright this screen is. The brightness setting does decrease significantly in the dark but when viewing something with a mostly white background, I have to squint until my pupils constrict to a point where my retinas aren't getting torched. In brighter environments, the brightness level seems to increase accordingly.
Hi guys,
I came across an article about this issue from Aman Jain (Valuetalk) : https://www.valuewalk.com/2019/04/galaxy-s10-auto-brightness-no-issue/amp/
Facing Issues With Galaxy S10 Auto Brightness? Do This
Aman Jain Aman Jain
April 3, 2019 11:42 am
Samsung Galaxy Note 10E
rieo / Pixabay
Galaxy S10 auto brightness
rieo / Pixabay
We have already covered the issues with the proximity sensor in the Samsung Galaxy S10. Now, it appears, one more sensor in the Galaxy S10 is not working as it should. Several users are complaining that the Galaxy S10 auto brightness or the ambient light sensor is not working perfectly.
Galaxy S10 auto brightness – what’s the issue?
Affected users have raised the issue on social platforms and Samsung’s product forums (first spotted by tech site PiunikaWeb). Users complained that the brightness level does not automatically come down in low light. So, they have had to do it manually, but it remains at the set level even when the light is good.
“Sometimes I have to manually turn down my brightness if I turn off the lights in my bedroom for example. Or if i turn on the lights, brightness stays on the same level. But if i turn off my phone display then turn it back on, the brightness is suddenly changed,” one user said.
Further, users also say that with adaptive brightness turned on, the screen goes dark when facing the sun. “White highlights are bright blue, and all colors are distorted. It’s unusable. Spin back around or go into the shade, and the screen comes back to normal,” one user said on Reddit.
Users say that this was not the case with the Galaxy S9, where the auto brightness feature worked perfectly. One user even claims that the Galaxy S10 doesn’t even have a light sensor, instead, maybe there is some in-display sensor that needs a software fix.
“..even if you put your finger on the front camera the auto brightness still moves …..also if you acces this *#0*# you cannot find the light sensor because it’s not there like old samsung phones,” one user said on Samsung’s product forum.
Adaptive brightness to blame
Several users believe that the adaptive brightness is to blame here, and so they have turned it off. However, turning it off is not a solution, and many users agree to that.
“This is a huge problem, and should not be happening on a new phone. The adaptive brightness is a major feature of the phone, and simply turning it off isn’t an option as far as I’m concerned,” one Reddit user said.
It must be noted that Adaptive Brightness came with Android 9. It is an AI based feature that gets better with time. Meaning, it would learn from the interactions that users make with the screen brightness slider, and over time, it would customize the brightness automatically to meet the users’ needs.
Google says that in its testing for Adaptive Brightness, it found that half the test users made fewer adjustments to the slider after a week of using the Adaptive Brightness.
Not an issue, give it some time
Based on Google’s explanation, it seems, users need to give some more time for their phones to adapt to the Adaptive Brightness. Even Samsung’s explanation of the issue with the Galaxy S10 auto brightness is somewhat similar.
“From Android P, a user’s brightness setting pattern is learned, and when the user sets a specific brightness the automatic brightness is controlled to be closer to that specific brightness…… However, when you set the brightness, the brightness can be applied immediately in the short term. If more than 30 seconds after the screen is turned off and the ambient light environment changes by more than 60%, this short term setting brightness will return to the light that was relearned,” Samsung developers say.
Additionally, developers say that users can reset the brightness curve to start the learning process again. To do this, go to Settings – Apps – Show system apps – Device Health Service – Storage – Manage Storage – reset Adaptive Brightness.
All this explanation from Samsung developers and Google could mean that the complaints from users about the Galaxy S10 auto brightness are valid, but it still is not an issue. Things will get better with time as AI learns more about users’ preferences.
Though it is not a bug, affected users do not seem very satisfied as they still have to live with inferior quality images (even if for some time until AI applies the learning).
“Not sure it’s a error to be replicated per se. It’s just an inferior looking quality of image. They will have to make the comparison to see the very obvious difference,” one user said.
ValueWalk
FYI : the brightness sensor is under the screen like the proxity sensor, located bellow the wifi / network icon. It's visible at sun light.
inkortage said:
FYI : the brightness sensor is under the screen like the proxity sensor, located bellow the wifi / network icon. It's visible at sun light.
Click to expand...
Click to collapse
There are actually two light sensors: front and back of the phone.
Unlock the device without pressing the power button and only by placing your fingerprint on the sensor.
The light sensor starts checking the environment light only in this situation
I was checking twitter on dark mode and when a picture with black appear, i saw like a jam effect.
was using like 30-40% of brightness, so dont know if it normal on amoled display or my screen is damaged.
Also i know the bright on mi 9t pro is a little lower than other amoleds.
Im using a mi 9t pro global version
I got my Redmi K20 pro today and i observed the same issue/effect? I don't know if I should return it or not! I'm the kind of guy who uses phone at the leat minimum brightness and this issue is irritating the hell out of me! It is way pronounced in Instagram too when the image has grey/dark blue colours!
We're you able to find any solution?
Hey guys, hope you are doing great.
I have noticed one peculiar thing, when i sit in pitch dark places with brightness at the end, i face this white issue over my display screen shot attached, it's Google chrome app which showing me these results,(there are many more also)for this to be noticed you must sit in a dark room.
I know it's typical led panel issue and i would like to know if i am the only one?
Do you seriously think we are able to see your display in a screenshot?
IoIam said:
Do you seriously think we are able to see your display in a screenshot?
Click to expand...
Click to collapse
If you are in a pitch dark room and see no anamoly then your's display is good. If not you will see a whitish tint over the top area
And btw you can check on your device itself, by just opening chrome(if it's black) and in dark room with brightness as low as possible.
kanteon said:
Hey guys, hope you are doing great.
I have noticed one peculiar thing, when i sit in pitch dark places with brightness at the end, i face this white issue over my display screen shot attached, it's Google chrome app which showing me these results,(there are many more also)for this to be noticed you must sit in a dark room.
I know it's typical led panel issue and i would like to know if i am the only one?
Click to expand...
Click to collapse
Enable feature in display settings under anti flicker mode to on. and check again your screen in low light conditions.
Yup, that worked, it increase overall contrast for low brightness, is this condition(tint) is normal for amoled panel, or i am just unlucky.
kanteon said:
Yup, that worked, it increase overall contrast for low brightness, is this condition(tint) is normal for amoled panel, or i am just unlucky.
Click to expand...
Click to collapse
yes that's normal for amoled panel.
Hi all, my p30 pro, when the screen is woken up in the bright sun, it goes to max brightness. However after about 30 seconds the screen dials back the brightness to about 75%, and even if it manually move it back to 100%, the screen doesn't get any brighter. I have tried all the setting regarding the display, manual, auto, vivid etc. I have factory reset the phone as well. Any thoughts or ideas please?
nemesis_rb said:
Hi all, my p30 pro, when the screen is woken up in the bright sun, it goes to max brightness. However after about 30 seconds the screen dials back the brightness to about 75%, and even if it manually move it back to 100%, the screen doesn't get any brighter. I have tried all the setting regarding the display, manual, auto, vivid etc. I have factory reset the phone as well. Any thoughts or ideas please?
Click to expand...
Click to collapse
Hi.I am facing the same problem.Did you manage to fix it?
egres said:
Hi.I am facing the same problem.Did you manage to fix it?
Click to expand...
Click to collapse
Unfortunately no, I am still using it. But it is almost unusable under sunlight. Was hoping a software update fixed it, but no luck.
I forgot to ask what software version are you on and when the problems started.I have a mic problem too and I already changed the mic but although it's a bit better it's still not usable as before.
I am on emui 12. Can't remember when it started.
any solutions? on the newest version of the software my display doen not adjust automatically to the light outside. I do not even have this option. When I try to restore to the previous version by the hi suite I get a message that I have a problem with my Internet. I dont know if it worked on the previous one . I got it and installed the newest version. Any ideas?