So, some days ago I've purchased a Mi A2 Lite. Right after starting it and testing it's basic functions, I headed right away to the computer to change ROMs. When I booted TWRP through fastboot, I wiped system to install another ROM, but the roms i'd downloaded wouldn't flash. Then, suddenly, TWRP touch stops working. I found then that it was a normal thing, and a guy posted in a thread that locking and unlocking his bootloader made TWRP work again (I did try to boot it again and didn't work). So I locked the device through a simple tool. Now, I can't unlock the bootloader in anyway. MiUnlock requires binding the device to an account (my device doesn't have an OS anymore since I wiped it), can't unlock it through fastboot (token verification failed), can't enter adb through commands because it is locked. MiFlash requires an authorized account to flash. QFIL doesn't flash because by entering in EDL Mode through test points, you have to start flashing fast, otherwise it won't be able to read hello packet, but the QFIL app takes too long to start flashing, I click it, it loads and loads, and just says it couldn't read packet. I'm trying to unbrick this device for 4 days long.
Now, the reason I say it is a faked Mi A2 Lite (can't know it for sure, actually) are these:
-Although the device came new from fabric, all the box and acessories had their plastics and stickers, the device came unlocked.
-The device came with Android One (which is right, as I bought a Mi A2 Lite), but has a Mi-Recovery 3.0, which is from MIUI systems, and Redmi 6 Pro has MIUI.
-When trying to unlock it through fastboot, I entered some commands to get info of the device, the interesting ones were these:
imei: (blank)
product: sakura (which is Redmi 6 Pro)
version-bootloader:MSM8953_DAISY1.0_20181019193735
I am from Brazil, and I am mostly sure that it is original and came this way from Xiaomi because the seller gave me the receipt and says he buys from authorized seller. And everything came with it's plastics on, the box was sealed-new, so I don't believe the seller did this, I believe Xiaomi did this mi a2 lite/redmi 6 pro confusion.
EDIT: I'm now sure it's Xiaomi's fault as I've found another identical cases where they had "sakura" devices with "daisy" bootloaders (exactly same versions), they probably chose to do this, which is worse than this being a mistake.
Could you guys help me, don't know what to do anymore. If you need more info to solve this problem, please ask, I'll post them right away.
@GNDawg
Well, I search around and it seems to be most likely a Xiaomi fault. they flashed a wrong firmware but it also could be that some seller in the chain took a bricked device, changed back over and flashed a rom that it had available either changing or not motherboard from the original but this is just a theory hard to proof.
Anyway now your best bet would be try to flash through an unnoficial tool like QPST download drivers and follow carefully instructions to update then onto your pc http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/ and here is a tutorial how to use it https://c.mi.com/thread-226346-1-1.html this tool gives error on several cases so you have to search probably a modded sahara file for other MSM8953 to fix it.
And here a thread with a different method, the idea is try to boot from the sdcard, you could need some files to do it like a part of the system dumped for other user with the same device, this thread is just a reference for other model https://forum.xda-developers.com/g4/general/guide-unbrick-via-external-sdcard-qfil-t3748946
I did in the past the file to be flashed onto TWRP and dump it, I´ll try to search for it
SubwayChamp said:
@GNDawg
Well, I search around and it seems to be most likely a Xiaomi fault. they flashed a wrong firmware but it also could be that some seller in the chain took a bricked device, changed back over and flashed a rom that it had available either changing or not motherboard from the original but this is just a theory hard to proof.
Anyway now your best bet would be try to flash through an unnoficial tool like QPST download drivers and follow carefully instructions to update then onto your pc http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/ and here is a tutorial how to use it https://c.mi.com/thread-226346-1-1.html this tool gives error on several cases so you have to search probably a modded sahara file for other MSM8953 to fix it.
And here a thread with a different method, the idea is try to boot from the sdcard, you could need some files to do it like a part of the system dumped for other user with the same device, this thread is just a reference for other model https://forum.xda-developers.com/g4/general/guide-unbrick-via-external-sdcard-qfil-t3748946
I did in the past the file to be flashed onto TWRP and dump it, I´ll try to search for it
Click to expand...
Click to collapse
Hey man, I didn't quite understand the tutorial you passed me, because it just says to build a EDL Cable and then flash it through MiFlash, as far as I understood. I'm so tired I think I'm gonna pay s-unlock to unbrick this damn phone, are they trustworthy? The service doesn't need TeamViewer anymore, they've built a tool which needs an account with credits (you pay for them), and then you can flash using these credits, I wonder if the process fails, will the credits be gone? hahaha man, look at the level we're at, thank you Xiaomi!
GNDawg said:
Hey man, I didn't quite understand the tutorial you passed me, because it just says to build a EDL Cable and then flash it through MiFlash, as far as I understood. I'm so tired I think I'm gonna pay s-unlock to unbrick this damn phone, are they trustworthy? The service doesn't need TeamViewer anymore, they've built a tool which needs an account with credits (you pay for them), and then you can flash using these credits, I wonder if the process fails, will the credits be gone? hahaha man, look at the level we're at, thank you Xiaomi!
Click to expand...
Click to collapse
In the post in spanish there are some useful links like Qualcomm 9008-USB drivers and other to explain how to avoid drivers verification on Windows, this could be necessary to get a perfect connection among your device and pc although I´m begin to suspect that motherboard is damaged at some level, I say you this cause I had similar problem in different circumstances with a Xiaomi device in the past; briefly explained an user uploaded incorrect files to some site and I flashed onto my device and some of the files were for other model; result: totally bricked, I tried a lot of guides and method but I didn´t give out till I was absolutely sure that there was nothing more to do with. Finally I had to buy other motherboard and that device now is working fine.
I commented about a method to "burn" a part of the image in an external SDcard, a part of the system image means just about 100 or 200 MB sized of the image, I shared year/s ago a zip to obtain it (I didn´t find now) so some user that have same device can flash it through TWRP and so dump this "part/fraction" of system, then they can share with you, you burn it using the disc image utility inbuilt on Windows and then apply to your device and this way your device do an attempt to boot from this SDcard, then you can flash normally all the whole rom through XiaoMi flash. But your case is slightly different, it seems like not a totally brick, in my case I didn´t have any partition working like fastboot, recovery, nothing at all. The third link refers to something similar to the exposed above.
Referent to this service, you have to be sure that they can do something with a device that can´t communicate correctly with XiaoMi flash and you said me first that the tool needs an account authorized but then you said that the tool began but finally failed to flash that mean that the tool can work without an authorization, if this is true you only have to refine the method to use it correctly.
Probably you can upload an image while you´re attempting in XiaoMi flash to see how is detecting it.
SubwayChamp said:
In the post in spanish there are some useful links like Qualcomm 9008-USB drivers and other to explain how to avoid drivers verification on Windows, this could be necessary to get a perfect connection among your device and pc although I´m begin to suspect that motherboard is damaged at some level, I say you this cause I had similar problem in different circumstances with a Xiaomi device in the past; briefly explained an user uploaded incorrect files to some site and I flashed onto my device and some of the files were for other model; result: totally bricked, I tried a lot of guides and method but I didn´t give out till I was absolutely sure that there was nothing more to do with. Finally I had to buy other motherboard and that device now is working fine.
I commented about a method to "burn" a part of the image in an external SDcard, a part of the system image means just about 100 or 200 MB sized of the image, I shared year/s ago a zip to obtain it (I didn´t find now) so some user that have same device can flash it through TWRP and so dump this "part/fraction" of system, then they can share with you, you burn it using the disc image utility inbuilt on Windows and then apply to your device and this way your device do an attempt to boot from this SDcard, then you can flash normally all the whole rom through XiaoMi flash. But your case is slightly different, it seems like not a totally brick, in my case I didn´t have any partition working like fastboot, recovery, nothing at all. The third link refers to something similar to the exposed above.
Referent to this service, you have to be sure that they can do something with a device that can´t communicate correctly with XiaoMi flash and you said me first that the tool needs an account authorized but then you said that the tool began but finally failed to flash that mean that the tool can work without an authorization, if this is true you only have to refine the method to use it correctly.
Probably you can upload an image while you´re attempting in XiaoMi flash to see how is detecting it.
Click to expand...
Click to collapse
So, there's this problem that happens when the software can't connect to the device if I take too long to flash after entering EDL Mode, I've seen a lot of other cases of this "problem" too. I have to test point and flash right after, which is no problem in MiFlash, but in QFIL and QPST it looks like it takes too long to connect with the device and then it fails. But I've seen that S-Unlock uses
their own tool called XiaomiTool, where they create an account for you which has credits. Then the tool uses the credits to flash. It's quite confusing... but you don't need to grant them TeamViewer access, which if way more safer than the previous method. Man... I had a ZUK device before, there was no AntiRollback ****, I didn't even had to unlock a bootloader in the first place you would just wipe and flash all day long for as long as you'd want, I was in heaven and didn't know it.
Also, I'm pretty sure the softwares detect the device just fine, the device connects through 9008 port, and they detect it right after connecting it.
GNDawg said:
So, there's this problem that happens when the software can't connect to the device if I take too long to flash after entering EDL Mode, I've seen a lot of other cases of this "problem" too. I have to test point and flash right after, which is no problem in MiFlash, but in QFIL and QPST it looks like it takes too long to connect with the device and then it fails. But I've seen that S-Unlock uses
their own tool called XiaomiTool, where they create an account for you which has credits. Then the tool uses the credits to flash. It's quite confusing... but you don't need to grant them TeamViewer access, which if way more safer than the previous method. Man... I had a ZUK device before, there was no AntiRollback ****, I didn't even had to unlock a bootloader in the first place you would just wipe and flash all day long for as long as you'd want, I was in heaven and didn't know it.
Also, I'm pretty sure the softwares detect the device just fine, the device connects through 9008 port, and they detect it right after connecting it.
Click to expand...
Click to collapse
You say that through XiaoMi Flash (also usually called MiFlash tool) the flash process begins then no need to an authorized account, right? if this is right then now the only challenge is get the tool to work fine and in this case I guess that the best would be to try with some tricks like:
- Uninstall all the drivers (I know you say that pc detects it but it seems that in the way it is disconnecting).
- Before to reinstall them again disable signature verification from Windows to avoid that some firewall/antivirus cut the drivers to be installed properly.
- Check that the folder where the images and the scripts are, be in the last directory/path in the tool an short the name where it contained for "6mipro" for example without spaces.
- Move all the files of the rom to the same drive and folder where XiaoMi flash is installed usually C drive.
- Prepare previously all the tool and the path and just to the end put device in download mode, with battery disconnected and fingerprint is also recommendable to get out.
- Try with firmware for 6 Pro and also for A2 Lite.
Regarding this service is extrange how they can take control over device, no remote service, nor IMEI required or IP digits, How they can put a firmware onto your device this way!. There are other services that you can consult before to accept this unless you find some positive reference about it.
SubwayChamp said:
You say that through XiaoMi Flash (also usually called MiFlash tool) the flash process begins then no need to an authorized account, right? if this is right then now the only challenge is get the tool to work fine and in this case I guess that the best would be to try with some tricks like:
- Uninstall all the drivers (I know you say that pc detects it but it seems that in the way it is disconnecting).
- Before to reinstall them again disable signature verification from Windows to avoid that some firewall/antivirus cut the drivers to be installed properly.
- Check that the folder where the images and the scripts are, be in the last directory/path in the tool an short the name where it contained for "6mipro" for example without spaces.
- Move all the files of the rom to the same drive and folder where XiaoMi flash is installed usually C drive.
- Prepare previously all the tool and the path and just to the end put device in download mode, with battery disconnected and fingerprint is also recommendable to get out.
- Try with firmware for 6 Pro and also for A2 Lite.
Regarding this service is extrange how they can take control over device, no remote service, nor IMEI required or IP digits, How they can put a firmware onto your device this way!. There are other services that you can consult before to accept this unless you find some positive reference about it.
Click to expand...
Click to collapse
No, it does need an authorized account, but first it has to connect to the device, after it suceeds, it then asks for the account. I don't think that it "disconnecting" is a big issue, only if the Xiaomi Tool that the S-Unlock guys use also takes a long time to connect to the device.
To explain the problem more precisely, the software tells me "cannot read hello packet if I press the button too long after connecting EDL, it fails seconds after clicking to flash. If I connect the device and flash right away, it suceeds and then proceeds to ask the authorized account.
And about the service, they don't actually take control over the device, I would do the flashing myself, the only thing they do is provide the account necessary to flash, but it isn't in the MiFlash tool, it's the XiaomiTool (they give the link to the app), where it first asks for an account, then only after logging in it can start the flashing process. One of those cases I've talked about that were just like mine were solved with these guys.
GNDawg said:
No, it does need an authorized account, but first it has to connect to the device, after it suceeds, it then asks for the account. I don't think that it "disconnecting" is a big issue, only if the Xiaomi Tool that the S-Unlock guys use also takes a long time to connect to the device.
To explain the problem more precisely, the software tells me "cannot read hello packet if I press the button too long after connecting EDL, it fails seconds after clicking to flash. If I connect the device and flash right away, it suceeds and then proceeds to ask the authorized account.
And about the service, they don't actually take control over the device, I would do the flashing myself, the only thing they do is provide the account necessary to flash, but it isn't in the MiFlash tool, it's the XiaomiTool (they give the link to the app), where it first asks for an account, then only after logging in it can start the flashing process. One of those cases I've talked about that were just like mine were solved with these guys.
Click to expand...
Click to collapse
Ok, now the things are most clear, I never need an authorized account (by fortune) I´m not sure and I expect that my actual doesn´t need it just in case.
When you connect for first time to the tool and try to flash then the tool allows you continue but of course then it prompts for an authorization, from here you can´t try a second attempt in the same time that it remains connected this will lead you then of a few minutes to a fail like "sahara fail" or "cannot read packet".
In my experience the second attempt didn´t work at all so you have to disconnect device and restart the tool to can try it again.
As far I understand this is similar to a patched Odin for Samsung devices to bypass some security controls but in this case they provide you a patched XiaoMi tool which is controlled remotely to get authorized. It has sense and it seems trustworthy.
I don´t know if actually Xiaomi authorizes new account users https://miui.blog/any-devices/mi-account-authorization-tips/
And Probably you can try first an older version of MiPhone, previous than XiaoMi flash https://www.xiaomiflash.com/download/
SubwayChamp said:
Ok, now the things are most clear, I never need an authorized account (by fortune) I´m not sure and I expect that my actual doesn´t need it just in case.
When you connect for first time to the tool and try to flash then the tool allows you continue but of course then it prompts for an authorization, from here you can´t try a second attempt in the same time that it remains connected this will lead you then of a few minutes to a fail like "sahara fail" or "cannot read packet".
In my experience the second attempt didn´t work at all so you have to disconnect device and restart the tool to can try it again.
As far I understand this is similar to a patched Odin for Samsung devices to bypass some security controls but in this case they provide you a patched XiaoMi tool which is controlled remotely to get authorized. It has sense and it seems trustworthy.
I don´t know if actually Xiaomi authorizes new account users https://miui.blog/any-devices/mi-account-authorization-tips/
And Probably you can try first an older version of MiPhone, previous than XiaoMi flash https://www.xiaomiflash.com/download/
Click to expand...
Click to collapse
Hey man, I bought the S-Unlock service, I tried to flash the daisy ROM but it wouldn't send the "firehose_emmc_something" succesfully, so I tried the Redmi 6 Pro ROM i'd downloaded (Xiaomi_Redmi_6_Pro_V9.6.4.0.ODMMIFD_20180730.0000.00_8.1_Global_XFT) and it succesfully flashed!!!!!
BUT, it doesn't boot. "This version of MIUI can't be installed on this device."
Any ideas? In the support group of S-Unlock they say this happens when you flash a global rom into a chinese device, which can only receive global roms with unlocked bootloaders. An admin from the group told me to flash chinese ROM.
EDIT: sent the command fastboot getvar all:
product: sakura_india
it ****ing changed hahaha, now I'll probably have to flash an indian ROM, but I'll have to pay again, I really want to give up this device...
GNDawg said:
Hey man, I bought the S-Unlock service, I tried to flash the daisy ROM but it wouldn't send the "firehose_emmc_something" succesfully, so I tried the Redmi 6 Pro ROM i'd downloaded (Xiaomi_Redmi_6_Pro_V9.6.4.0.ODMMIFD_20180730.0000.00_8.1_Global_XFT) and it succesfully flashed!!!!!
BUT, it doesn't boot. "This version of MIUI can't be installed on this device."
Any ideas? In the support group of S-Unlock they say this happens when you flash a global rom into a chinese device, which can only receive global roms with unlocked bootloaders. An admin from the group told me to flash chinese ROM.
EDIT: sent the command fastboot getvar all:
product: sakura_india
it ****ing changed hahaha, now I'll probably have to flash an indian ROM, but I'll have to pay again, I really want to give up this device...
Click to expand...
Click to collapse
The service is very limited, they had to guide you to a final success, it´s a shame.
It was hard to know exactly what firmware is the proper for this "hybrid" phone. The theory is right, this might be an indian version but I guess that you didn´t receive at first the getvar product as sakura_india.
It might be great if they can unlock bootloader and this way you can do anything on it.
Did you see bootloader status or if you can flash something now through fastboot?
Try with other tool for Qualcomm from here https://androidmtk.com/category/tools maybe some of them work.
SubwayChamp said:
The service is very limited, they had to guide you to a final success, it´s a shame.
It was hard to know exactly what firmware is the proper for this "hybrid" phone. The theory is right, this might be an indian version but I guess that you didn´t receive at first the getvar product as sakura_india.
It might be great if they can unlock bootloader and this way you can do anything on it.
Did you see bootloader status or if you can flash something now through fastboot?
Try with other tool for Qualcomm from here https://androidmtk.com/category/tools maybe some of them work.
Click to expand...
Click to collapse
The service is only to give me the EDL Authorization, they don't care if what I flash, they just grant me this permission to flash in EDL, which ****ing xiaomi requires. They have a bootloader unlocking service, but for MIUI v9 only, and there isn't an option for my phone (neither mi a2 lite nor redmi 6 pro). I'm willing to try again, it would cost me 10 dollars more, but I need to know what Rom works for this thing. I don't think these tools will work because the phone continues the same, but now with a ROM which the device doesn't accept because of locked bootloader which I can't unlock.
EDIT: I've read in an article from XDA that booting MIUI Roms in the Redmi 6 pro can brick it. I'll have to flash a custom rom?
GNDawg said:
The service is only to give me the EDL Authorization, they don't care if what I flash, they just grant me this permission to flash in EDL, which ****ing xiaomi requires. They have a bootloader unlocking service, but for MIUI v9 only, and there isn't an option for my phone (neither mi a2 lite nor redmi 6 pro). I'm willing to try again, it would cost me 10 dollars more, but I need to know what Rom works for this thing.
Click to expand...
Click to collapse
If the limit is according a certain time and not number of flashing sessions I think you have to follow these simple rules:
- Flash first an Indian version of 6 Pro http://en.miui.com/download-349.html#545 (choose stable not developer rom)
- Prepare/download if it exists a chinese version, I´m not sure it does so device was release for India but some guys are talking that they bought with a chinese firmware although in the official site there is only an Indian firmware.
- Keep in mind that this device has ARB so don´t try with a lower build number version.
I don't think these tools will work because the phone continues the same, but now with a ROM which the device doesn't accept because of locked bootloader which I can't unlock.
Click to expand...
Click to collapse
No, this tool can work as the same way that XiaoMi flash can, the same thing that both can´t achieve is that a wrong firmware can work/boot up on your device due to regional locking security. Maybe you can try this simple tool before https://androidmtk.com/download-emmc-dl-tool anyway if doesn´t result probably the best would be go for a second chance with that service.
SubwayChamp said:
If the limit is according a certain time and not number of flashing sessions I think you have to follow these simple rules:
- Flash first an Indian version of 6 Pro http://en.miui.com/download-349.html#545 (choose stable not developer rom)
- Prepare/download if it exists a chinese version, I´m not sure it does so device was release for India but some guys are talking that they bought with a chinese firmware although in the official site there is only an Indian firmware.
- Keep in mind that this device has ARB so don´t try with a lower build number version.
No, this tool can work as the same way that XiaoMi flash can, the same thing that both can´t achieve is that a wrong firmware can work/boot up on your device due to regional locking security. Maybe you can try this simple tool before https://androidmtk.com/download-emmc-dl-tool anyway if doesn´t result probably the best would be go for a second chance with that service.
Click to expand...
Click to collapse
No, every flash costs 10 credits, which costs 10 dollars. If I get it wrong, I have to pay again.
What I meant by the tools not working is that just like Xiaomi flash, they require the EDL authorization.
I tried with emmc tool, but I couldn't get it to work, it gives me "Failed to connect to phone"
Adding the edit I put in the previous reply, I read an article here in XDA saying that flashing MIUI Rom in Redmi6 pro (along with other devices) may brick the device just like my device is bricked right now (https://www.xda-developers.com/flash-miui-global-locked-bootloader-xiaomi-brick/
So, will I have to flash custom rom?
GNDawg said:
No, every flash costs 10 credits, which costs 10 dollars. If I get it wrong, I have to pay again.
Click to expand...
Click to collapse
Ah ok, then the best is go direct to the safest zone flashing the rom linked in my previous post.
What I meant by the tools not working is that just like Xiaomi flash, they require the EDL authorization.
I tried with emmc tool, but I couldn't get it to work, it gives me "Failed to connect to phone"
Adding the edit I put in the previous reply, I read an article here in XDA saying that flashing MIUI Rom in Redmi6 pro (along with other devices) may brick the device just like my device is bricked right now (https://www.xda-developers.com/flash-miui-global-locked-bootloader-xiaomi-brick/
Click to expand...
Click to collapse
Yes, this is now the scenario, to be honest your device is now "double" bricked, first time was bricked due to relock bootloader while a non-proper firmware was shipped with i.e. a Mi A2 Lite firmware on a different device. And the second time now when you flashed a a Global rom over a device that supposedly was (it had to be) shipped with an indian/chinese firmware.
But don´t worry about it, device at this way won´t boot due to a locked bootloader, if you still can enter to fastboot and recovery no signals of serious damages.
So, will I have to flash custom rom?
Click to expand...
Click to collapse
No, never try it yet with locked bootloader untill you unlocket it, this won´t result as same as try to modify any partition or file you can´t by now, your device simply won´t boot at all.
SubwayChamp said:
Ah ok, then the best is go direct to the safest zone flashing the rom linked in my previous post.
Yes, this is now the scenario, to be honest your device is now "double" bricked, first time was bricked due to relock bootloader while a non-proper firmware was shipped with i.e. a Mi A2 Lite firmware on a different device. And the second time now when you flashed a a Global rom over a device that supposedly was (it had to be) shipped with an indian/chinese firmware.
But don´t worry about it, device at this way won´t boot due to a locked bootloader, if you still can enter to fastboot and recovery no signals of serious damages.
No, never try it yet with locked bootloader untill you unlocket it, this won´t result as same as try to modify any partition or file you can´t by now, your device simply won´t boot at all.
Click to expand...
Click to collapse
Hey, so I downloaded the ROM you linked, but it is in .zip format, and the files inside are different from the other ROMs I downloaded, which are in .tgz (I think these are fastboot ROM files, dunno, but they are all in the same format and arrangement), I searched and found a ROM in MIUI site (http://en.miui.com/a-234.html).
The file name is sakura_india_global_images_V10.3.3.0.PDMMIXM_20190711.0000.00_9.0_global_400152c914.tgz
Looks like the same as the one you sent, but in tgz, since it is sakura india global image, 10.3.3.0 and 9.0.
GNDawg said:
Hey, so I downloaded the ROM you linked, but it is in .zip format, and the files inside are different from the other ROMs I downloaded, which are in .tgz (I think these are fastboot ROM files, dunno, but they are all in the same format and arrangement), I searched and found a ROM in MIUI site (http://en.miui.com/a-234.html).
The file name is sakura_india_global_images_V10.3.3.0.PDMMIXM_20190711.0000.00_9.0_global_400152c914.tgz
Looks like the same as the one you sent, but in tgz, since it is sakura india global image, 10.3.3.0 and 9.0.
Click to expand...
Click to collapse
Oh my bad, I linked the rom that is for recovery, the link that you have this is the right firmware to flash through fastboot.
SubwayChamp said:
Oh my bad, I linked the rom that is for recovery, the link that you have this is the right firmware to flash through fastboot.
Click to expand...
Click to collapse
**** man, I'm so frustrared, flashed this ROM and got the same ****ing thing. "This MIUI version can't be installed on this device."
fastboot getvar all
version-bootloader:MSM8953_DAISY2.0_20190711190946
(bootloader) hw-revision:10001
(bootloader) rollback_ver:2
(bootloader) serialno:09d58bc30805
(bootloader) kernel:lk
(bootloader) product:sakura_india
I found that if you send fastboot getvar anti you get if your phone has got antiroll or something like this
fastboot getvar anti
anti:
it gives me blank...
I think I may have another chance to flash, I have some credits, don't know if they are enough, what ROM should I try next if I can? I was thinking maybe chinese ROM?
GNDawg said:
**** man, I'm so frustrared, flashed this ROM and got the same ****ing thing. "This MIUI version can't be installed on this device."
fastboot getvar all
version-bootloader:MSM8953_DAISY2.0_20190711190946
(bootloader) hw-revision:10001
(bootloader) rollback_ver:2
(bootloader) serialno:09d58bc30805
(bootloader) kernel:lk
(bootloader) product:sakura_india
I found that if you send fastboot getvar anti you get if your phone has got antiroll or something like this
fastboot getvar anti
anti:
it gives me blank...
I think I may have another chance to flash, I have some credits, don't know if they are enough, what ROM should I try next if I can? I was thinking maybe chinese ROM?
Click to expand...
Click to collapse
Redmi 6Pro as same as Mi A2 Lite have ARB but actually bootloader revisions are not implementing it so it stays as blank (a kind of zero), when your device reach value 5 then you can´t downgrade anymore on locked bootloaders.
There is something very strange that unfortunately marked your device as practically unusable. The system partition seems to be wrong from the fabric.
It´s hard to know which firmware it´s the correct. Did you see those users with the same problem? maybe you can ask them in some forum for sure.
If exists a chinese version as stated in my previous post this would be the next chosing and the next if exists a chinese version of Mi A2 Lite so I wonder how they installed Android One previously.
SubwayChamp said:
Redmi 6Pro as same as Mi A2 Lite have ARB but actually bootloader revisions are not implementing it so it stays as blank (a kind of zero), when your device reach value 5 then you can´t downgrade anymore on locked bootloaders.
There is something very strange that unfortunately marked your device as practically unusable. The system partition seems to be wrong from the fabric.
It´s hard to know which firmware it´s the correct. Did you see those users with the same problem? maybe you can ask them in some forum for sure.
If exists a chinese version as stated in my previous post this would be the next chosing and the next if exists a chinese version of Mi A2 Lite so I wonder how they installed Android One previously.
Click to expand...
Click to collapse
I think the main problem is the locked bootloader, the device came unlocked so they must've installed android one easily.
I was searching for those similar cases I'd said and found at least 4 more, where they had Mi A2 Lite with sakura product name. Some of them said they had LineageOS installed... I don't remember seeing any Lineage symbols when I booted the device and I know it because I used on my previous device, I only know it was Android One.
In one of the cases, the buyer talked to the seller who showed him all of the other A2 Lite he had were just like his, with LineageOS installed. That's so bad man...
Another useful info, in the back of the phone there's a Model Number, and it matches the box model number, so it isn't counterfeit or scammed, I'm sure this came from Xiaomi.
And one of the cases were solved flashing MIUI China version, I believe that the only way these are not from Xiaomi is everybody having bought from the same chinese seller who did this, so it would make sense that only MIUI Chinese version works, I'll try it, since it's the only option.
I think I'll not be able to flash daisy ROMs, when I tried two daisy ROMs, in both cases the firehose thingy wouldn't send correctly and the flash would fail, sakura ones work fine.
GNDawg said:
I think the main problem is the locked bootloader, the device came unlocked so they must've installed android one easily.
Click to expand...
Click to collapse
Well, here is where my theory that some reseller had to do the whole mistake so the device come locked by default and if Xiaomi flashed Android One also they have to make an A/B partition scheme and this didn´t happen, anyway this is just for the record BUT this could be useful to claim your rights to the seller so if they didn´t do by itself then they had the obligation to buy from a reseller a good device to can sell it to a client in a well form and this is achieve without any technical skill just comparing the IMEIs declared from the box with device itself. Also atleast in my country R6Pro is cheaper than Mi A2 Lite so has sense that they bucked some dollars with it.
I was searching for those similar cases I'd said and found at least 4 more, where they had Mi A2 Lite with sakura product name. Some of them said they had LineageOS installed... I don't remember seeing any Lineage symbols when I booted the device and I know it because I used on my previous device, I only know it was Android One.
In one of the cases, the buyer talked to the seller who showed him all of the other A2 Lite he had were just like his, with LineageOS installed. That's so bad man...
Another useful info, in the back of the phone there's a Model Number, and it matches the box model number, so it isn't counterfeit or scammed, I'm sure this came from Xiaomi.
Click to expand...
Click to collapse
I guess they confussed LineageOs with Android One, in Pie there is not many differences at a quick view,
And one of the cases were solved flashing MIUI China version, I believe that the only way these are not from Xiaomi is everybody having bought from the same chinese seller who did this, so it would make sense that only MIUI Chinese version works, I'll try it, since it's the only option.
I think I'll not be able to flash daisy ROMs, when I tried two daisy ROMs, in both cases the firehose thingy wouldn't send correctly and the flash would fail, sakura ones work fine.
Click to expand...
Click to collapse
In this site there are many firmware versions https://xiaomifirmware.com/roms/download-official-roms-for-redmi-6-pro/ probably you have to choose the chinese version that came first with device and not try to upgrade it to the latest contrarily as we think before. I read that Redmi 6 Pro did come with Oreo 8.1 and although it had a Pie firmware was from other device and it won´t be considered as a downgrade in this case so never had Pie firmware based on Miui.
I did find this but I don´t know if it´s reliable, if unlocking bootloader can be done device will free for any rom http://en.miui.com/forum.php?mod=redirect&goto=findpost&ptid=5997528&pid=35773053
Related
After trying all kinds of roms from here, I decided to go back to basics and flash a global stable ROM.
In the Mi Flash software I forgot to check the "Clean All" button, and left the default(I don't know why this is the default) "Clean All and lock"
Now, I'm stuck in a recovery(can go to fastboot as well) bootloop, can't even turn it off unless the battery dies. It says at the bottom : "This MIUI version can't be installed on this device"
I'm unable to flash it again using mi flash, unable to unlock it again as it gives me a weird chinese error, that translated, it think it says : "This phone has been used by account 622****418, by looking for phone lock"
Unable to boot into EDL, tried with a deep flash cable(seems it is not supported anymore)
I didn't open it, as I still have warranty(just bought it 3 weeks ago).
USB Debugging and OEM unlock are off as it was just flashed so it has default values.
The account on it is mine, but apparently mi Unlock is not recognizing it. My Mi account has different digits and I have permission to unlock the bootloader since last year.
Is there any way that I can go around this ?
I'm thankful for any advice that you have, guys...
Your device is most likely permanently bricked - when the bootloader is locked with a global ROM on a Chinese Xiaomi phone, nothing can be done to fix it - except one thing.
Are you sure you're booting into EDL mode correctly? I think you need to short two points on the main PCB while plugging in a USB cable. Xiaomi has a proprietary implementation of EDL mode - IIRC you need special Xiaomi software and a Mi account with the appropriate permissions (you can beg Xiaomi for permission on the Mi forums, or buy a working account from someone online). In EDL mode, you can re-flash the China ROM and recover the device.
Most likely, that's what I'll have to do, but I wanted to consume every chance and tutorial online before I remove the Back glass...SO it's Service Center or Test Point with auth accounts, which it's hard to get. I rather pay. Just wanted to make sure that it's bricked from my perspective, like I can't do anything to fix it from my end. Thanks
There is nothing you can do, the bootloader is now locked and you are on a rom that's not matching.
I used the Russian tech reported in one of the other threads about bricked k20 pro, costed me $20 and I needed to open up the phone, and do test point edl which were all easy and well worth it to save the $650 AUD I paid for the phone.
https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012/page6
just add him on whatsapp and be nice to the tech and he will help you. I saw other posts if you ask him like an ass then he will ignore you.
I definitely don't want to open the phone. If it comes to that, I rather pay someone to do everything with proper tools and software.
You know, try to get in touch with xiaomi support. Explain The case and maybe they unlock it for you from there.
Hey Bro
Blitzz.666 said:
After trying all kinds of roms from here, I decided to go back to basics and flash a global stable ROM.
In the Mi Flash software I forgot to check the "Clean All" button, and left the default(I don't know why this is the default) "Clean All and lock"
Now, I'm stuck in a recovery(can go to fastboot as well) bootloop, can't even turn it off unless the battery dies. It says at the bottom : "This MIUI version can't be installed on this device"
I'm unable to flash it again using mi flash, unable to unlock it again as it gives me a weird chinese error, that translated, it think it says : "This phone has been used by account 622****418, by looking for phone lock"
Unable to boot into EDL, tried with a deep flash cable(seems it is not supported anymore)
I didn't open it, as I still have warranty(just bought it 3 weeks ago).
USB Debugging and OEM unlock are off as it was just flashed so it has default values.
The account on it is mine, but apparently mi Unlock is not recognizing it. My Mi account has different digits and I have permission to unlock the bootloader since last year.
Is there any way that I can go around this ?
I'm thankful for any advice that you have, guys...
Click to expand...
Click to collapse
Did you find any solution without edl method? Cause currently I'm facing the same problem.
The only solution here is to go into EDL Mode, if you dont have an authorized mi account, I recommend s-unlock.com they have an automated service and their own tool to flash your phone, go check them out. If you have doubt opening the phone, it isnt hard. Just use playing card first and dont remove it, then find an old credit card to continue further gently.
Shaonhider97 said:
Did you find any solution without edl method? Cause currently I'm facing the same problem.
Click to expand...
Click to collapse
After removing the back of my phone and fixing it with the help of an awesome dude from Japan found on whatsapp...I tried to unlock my bootloader again, and realised that the account I had in my phone was not the one that I was entering on miUnlock. I couldn't see that because the error message at 99% was in trad Chinese.
Maybe it would've worked if I knew that. If you go into Fastboot and try to unlock it, what message do you get?
Hi there,
unfortunately I bricked my Mi8 during a ROM Flash. I could not see the options as they were "hidden" because of the resolution of my screen. And unfortunately the standard option seems to be "lock", so it did and now I cannot flash any ROM anymore.
Is the method with opening the phone and get in touch with a doggy service to unlock it still up date?
Is there anything I could do? Will Xiaomi help me if I write them an email?
Help would be much appreciated.
Well, not knowing what you flashed and how you did it, it's hard to give an advice.
Can you boot to recovery, fastboot?
If you want some "output" you have to give more "input".
Is you phone recognized if you connect it to the pc? Perhaps you can revive it with mi flash and a complete rom (tgz). Be aware of the danger of relock!
I know I did a mistake as i flashed it wrong as I did not choose the correct setting (just clean instead of clean and lock). I did not see the options when I did the flash as they were "hidden". The Bootloader is locked and therefore I cannot flash another ROM.
I can get into fastboot, no problem. But I cannot load a ROM (Bootloaderbis locked).
I do wonder if there is any way instead of opening the phone and get in touch with a commercial unlocker service.
berndbrecht said:
I know I did a mistake as i flashed it wrong as I did not choose the correct setting (just clean instead of clean and lock). I did not see the options when I did the flash as they were "hidden". The Bootloader is locked and therefore I cannot flash another ROM.
I can get into fastboot, no problem. But I cannot load a ROM (Bootloaderbis locked).
I do wonder if there is any way instead of opening the phone and get in touch with a commercial unlocker service.
Click to expand...
Click to collapse
Can't you simply use the bootloader unlock tool from MI?
Unfortunately not, it stops at the second point and tells me that this is not connected to my mi account.
berndbrecht said:
Unfortunately not, it stops at the second point and tells me that this is not connected to my mi account.
Click to expand...
Click to collapse
Wipe data and try again. What's the issue with "resolution of screen"?
Why would the wipe help? I guess all data is errased anyway because iIflashed a fastbootrom via mi flasher. The problem was that a portion of the program (mi flasher) was hidden, the part on the bottom where you choose which flashmethod. Therefore standard is lock device and that happened...
berndbrecht said:
Why would the wipe help? I guess all data is errased anyway because iIflashed a fastbootrom via mi flasher. The problem was that a portion of the program (mi flasher) was hidden, the part on the bottom where you choose which flashmethod. Therefore standard is lock device and that happened...
Click to expand...
Click to collapse
I don't think your description of the issue is detailed enough for helping.
What else do you need to know?
berndbrecht said:
What else do you need to know?
Click to expand...
Click to collapse
Just try to unlock bootloader again. If it is not possible, you have to contact with someone who has Xiaomi account authorization.
Yeah, like the s unlock service. I think their my last chance after reading through the internet. Not looking forward to open my phone. pfffff...
berndbrecht said:
Yeah, like the s unlock service. I think their my last chance after reading through the internet. Not looking forward to open my phone. pfffff...
Click to expand...
Click to collapse
I paid 12$ when my previous Redmi 6 pro was relocked after xiaomi.eu update. It is very sad that you must pay for authorization. Shame of Xiaomi.
berndbrecht said:
Yeah, like the s unlock service. I think their my last chance after reading through the internet. Not looking forward to open my phone. pfffff...
Click to expand...
Click to collapse
Is your device a Global or Chinese device and how long ago did you buy it and where from? If the bootloader was unlocked when you attempted to flash whatever you flashed then it was unlocked by someones account. Are you saying that you did not unlock it?
If you did unlock it yourself, then you can unbrick it. If someone else unlock the bootloader you should try contacting that person to get their id and password to unlock the device again, and then you can remove their account from the device and replace it with yours.
Next
Since you have fastboot
You need to download the fastboot rom for whichever device you own. Also, your phone must be clean, you will lose all data.
Mi8 Global Rom: https://c.mi.com/oc/miuidownload/detail?device=1700346
Chinese Mi 8 Rom : http://www.miui.com/download-345.html
Unpack the Rom, on your desktop and then place your phone into EDL Mode or fastboot. - The fastboot Rom comes with the Fastboot flashall script, it will fully restore your phone to the a Stable Rom and Overwrite every partition..
If you unpack the rom and it unzips into a larger version of the rom, unpack the new unpacked larger version, it will unpack into a folder, inside the folder local the flashall.bat file and with the phone connected double click it and wait 5 to 10 minutes until it reboots by itself, you will see the screen to connect to wifi, and then to add you account credentials, enter credentials, enjoy your restored phone.
---------- Post added at 07:29 AM ---------- Previous post was at 07:23 AM ----------
mar.ur said:
I paid 12$ when my previous Redmi 6 pro was relocked after xiaomi.eu update. It is very sad that you must pay for authorization. Shame of Xiaomi.
Click to expand...
Click to collapse
You don't, ( well not anymore) you only pay someone to unlock if you do not have your account bound to the device. The person that you would pay has a vendors master unlocking account, these are very limited and these people are mostly located in Russia and Vietnam.
tsongming said:
Is your device a Global or Chinese device and how long ago did you buy it and where from? If the bootloader was unlocked when you attempted to flash whatever you flashed then it was unlocked by someones account. Are you saying that you did not unlock it?
If you did unlock it yourself, then you can unbrick it. If someone else unlock the bootloader you should try contacting that person to get their id and password to unlock the device again, and then you can remove their account from the device and replace it with yours.
Next
Since you have fastboot
You need to download the fastboot rom for whichever device you own. Also, your phone must be clean, you will lose all data.
Mi8 Global Rom: https://c.mi.com/oc/miuidownload/detail?device=1700346
Chinese Mi 8 Rom : http://www.miui.com/download-345.html
Unpack the Rom, on your desktop and then place your phone into EDL Mode or fastboot. - The fastboot Rom comes with the Fastboot flashall script, it will fully restore your phone to the a Stable Rom and Overwrite every partition..
If you unpack the rom and it unzips into a larger version of the rom, unpack the new unpacked larger version, it will unpack into a folder, inside the folder local the flashall.bat file and with the phone connected double click it and wait 5 to 10 minutes until it reboots by itself, you will see the screen to connect to wifi, and then to add you account credentials, enter credentials, enjoy your restored phone.
---------- Post added at 07:29 AM ---------- Previous post was at 07:23 AM ----------
You don't, ( well not anymore) you only pay someone to unlock if you do not have your account bound to the device. The person that you would pay has a vendors master unlocking account, these are very limited and these people are mostly located in Russia and Vietnam.
Click to expand...
Click to collapse
Hi there,
that brings some light into the darkness, although I am did not completely understood all you wrote.
1. I bought the device used in Germany and it is the German version. It was unlocked and I installed Havoc OS which worked fine. Then I thought I should update Havoc OS and that'S what I did. This ended in a Bootloop. I went into the Recovery and it was kinda weird as it asked me in chinese to enter my pattern. I did and after that the touchscreen stopped working. Still could get into recovery and also install a new one via fastboot. But same problem. Then I googled and as I understood the solution to other people was an earlier MIUI ROM which I installed via the Mi Flash tool and here I am chosing the wrong selection for the flash and ending up in a brick.
2. I don't have the device connected to my MI account. So I guess I need someone with a vendor account? S Unlock also offers a software (one has still to pay) which works without the help of someone logging into and using e.g. Teamviewer. (at least that is their claim)
3. I cannot connect the device with MI flash and therefore no flash of a ROM is possible which brings me to
4. In any case, I for sure have to ****ing open the phone and play with the EDL Touchpoints? Right?
If one has any further ideas let me know, I am really fed up with this ****.
berndbrecht said:
Hi there,
that brings some light into the darkness, although I am did not completely understood all you wrote.
1. I bought the device used in Germany and it is the German version. It was unlocked and I installed Havoc OS which worked fine. Then I thought I should update Havoc OS and that'S what I did. This ended in a Bootloop. I went into the Recovery and it was kinda weird as it asked me in chinese to enter my pattern. I did and after that the touchscreen stopped working. Still could get into recovery and also install a new one via fastboot. But same problem. Then I googled and as I understood the solution to other people was an earlier MIUI ROM which I installed via the Mi Flash tool and here I am chosing the wrong selection for the flash and ending up in a brick.
2. I don't have the device connected to my MI account. So I guess I need someone with a vendor account? S Unlock also offers a software (one has still to pay) which works without the help of someone logging into and using e.g. Teamviewer. (at least that is their claim)
3. I cannot connect the device with MI flash and therefore no flash of a ROM is possible which brings me to
4. In any case, I for sure have to ****ing open the phone and play with the EDL Touchpoints? Right?
If one has any further ideas let me know, I am really fed up with this ****.
Click to expand...
Click to collapse
Okay that better explains your real issue
You had an issue with the lockscreen, which could had been resolved by removing encryption ( formatting user data ) by using ADB or using the Tool All in One. ) Unfortunately, you misunderstood what the issue was and flashed a rom without unchecking unlock bootloader.
Since the bootloader has been relocked, you may need the original account info that unlocked the bootloader. ( If it's still bound to the device) If possible contact the person that you bought the phone from and get their account, then you can use the steps that I listed above by placing the phone into EDL.
If you are asked for a Mi account password, after restoration, then the phone is absolutely still bound to the previous owners account.
You do not necessarily need to open the phone :
You can probably use ADB to place the phone into EDL mode : adb reboot edl
You can use an EDL cable Such as this one
On some phones it is possible to enter EDL by pressing and holding the power button and the volume up and down simultaneously, you can very that the phone is in EDL by connecting it to your PC then go to Control Panel/System/ports <<<< Here you will see port 9008, that means you are in EDL mode.
After installing fastboot rom via flash all.bat method
After connecting to WIFI, you may be asked for the Mi Cloud account (if linked) If so contact the previous owner for that account info, then once the phone has gone through setup, remove the account from the phone in settings/Backup ( It is also possible that the phone is not bound to a account) If no account is linked then you will be able to link a new account and then wait 72 to 360 hours to be able to re-unlock the bootloader.
If the phone is bound to a previous user,
The only option is to use a reputable service company who has a master unlock account. if this is indeed the case, you should try contact Xiaomi and see if they can recommend someplace close to where you live.
@berndbrecht
I just found out via the Mi-Globe website that a XDA member has an official Xiaomi Unlock account and the price is extremely fair: I would suggest contacting @NikSalsa
You can read the same article that I did here : https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
Also, there are a couple of additional options listed , if you have trouble reaching NikSalsa
Hello,
Just after receiving my new Redmi K20Pro Premium Edition, I tried to change the China ROM to the K20Pro Indian one, with the hope to use Netflix and GPay.
I used Adb, fastboot and Miflash as recommanded. Everything works well. The phone bootloaded again but stopped on Main menu with this message :
"This MIUI version can't be installed on this device".
There, nothing worked anymore. the fastboot oem device-info says the phone is locked.
To unlock using Miflash-unlock I need to modify the Mi status of my Mi account in the phone. Impossible to do if the phone does not bootload...
If I try to flash a new ROM (China Raphaels specific for K20pro Premium) the Miflash program blocks because the phone is locked...
I do not know how solve this blockage.
Could you help me?
Don't know should you search now for a paid help by EDL authorized user, or is there an easier way
But in MiFlash, at the bottom/right, there is the default option: Clean all and lock, you should have checked-in instead: Clean all
Most users just want to flash (and clean) without relocking, and every week somebody similarly bricks his Mi 9* - if he/she didn't miss the default relock option, he would still be able to flash a proper firmware to safe his phone, but with the relocked bootloader he is f* up with no second chance
Don't know why developer(s) of MiFlash implemented the 'wrong' option for default - but the hook is there for long time and it keeps the EDL authorized helpers busy ?
Thanks. It what I understood a little bit too late.
Do you know how to contact a EDL authorized user?
Amarille said:
Thanks. It what I understood a little bit too late.
Do you know how to contact a EDL authorized user?
Click to expand...
Click to collapse
Search (here) or ask.
They usually use T...gram accounts and such posts are not permitted (albeit users like you do need help, it's meaningless to dispose the bricked phones to garbage just like that).
If you are quick enough, you will find the contact before the post gets deleted?
If you are already on some T..gram support group for Xiaomi, safely ask there
My phone suddenly get stucked into Redmi boot logo, cannot access system recovery but can access fastboot menu.
The problem is I hadn't enabled OEM unlock and developer options before. All the methods that I found so far requires bootloader unlock for that I also don't have MI account . What might be my next move? Thank you.
its hard to say what we can|t do with a still locked bootloader. if going to an authorized service center is out of reach, all we can do is try i guess. id still suggest going there if you can easily access your google account.
there are a few threads that say we can flash a still locked bl, but im not so sure.
Flash stock ROM/Recovery, lock bootloader?
Is there any guide on how I can complete return phone to stock and lock bootloader? Thank you.
forum.xda-developers.com
official stock roms can be hard to find on their site, heres an easier to navigate 1.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
gl
With EDL mode? I'm in a similar situation, a friend's mother forced a shutdown during a firmware update and destroyed the system that way. Of course the bootloader is blocked. I find it extremely stupid of Xiaomi to rely on a working system to give you the chance to unlock the bootoader but I guess that's how you sell some extra phones.
So far I've taken out the rear cover and the plastic that goes on top of the motherboard, unplugged the battery and with an arduino cable and some fiddeling shorted the "boot" pins while connecting the USB cable. Seems to be working given that MiFlash has changed the locked bootloader error for "indice fuera de limites" or in English "index out of limits error". I guess I don't have the right ROM so I'm downloading another one, but I'm struggilng to find the correct original fastboot ROM. The first one I've downloaded from Mi Community, the second one is from xiaomifirmwareupdater, but is gonna take forever to download. And I mean... F-O-R-E-V-E-R
Jaki1122 said:
With EDL mode?
...
Click to expand...
Click to collapse
gl with that, as only authorized people can properly flash from there. while i havent used EDL, there are some trusty people who can help us out (ive seen it in tg groups)
a site did say maybe using another version can help, who knows it might do the trick
https://c.mi.com/thread-2027947-1-0.html
also seems weird how goolag hasnt fixed half flashing from destroying, last time i had that happen was '12
Hello everyone, im new to this Forum.
I need to ask if someone can help me. I remember using the cleaning Tool on my Mi11 on the Bus and seconds after closing the App the Phone suddenly Turned off & after Turning it back on it just displayed the Message
"your System has been destroyed" and constantly bootlooping.
Recovery Mode was not working, i can only get into fastboot Mode.
I tried flashing new Firmware with the tools provided by Xiaomi but they always tell me to unlock the bootloader wich i havent done and now i cant cause i cant get into the Phone.
I also tried unlocking the Bootloader with MiFlash Unlock but it tells me to add my account in the MIUI Developer Options..
I then contacted some Xiaomi unlocking Service and pay him 30€ to unlock my Phone in a teamviewer Session via AvatarAuthTool and some other stuff but even he was not able to do it.
I removed the backplate from the Phone and shortened the testpoint pins and he tried again with no luck..
i have no Idea how to get this Phone usable again and im desperatly looking for any help or advice bcuz im currently rocking my old Sony Erricson Walkman Phone..
thanks in advance for anyone who is taking the time to read all this and trying to help
You didn't mention if it's still on warranty and whether you can get it repaired from there?
You don't need to unlock the bootloader if you're using the right firmware for your variant.
Do you happen to remember whether it was EEA, MI, IN or etc version for your device?
Unknown.Guy said:
You didn't mention if it's still on warranty and whether you can get it repaired from there?
You don't need to unlock the bootloader if you're using the right firmware for your variant.
Do you happen to remember whether it was EEA, MI, IN or etc version for your device?
Click to expand...
Click to collapse
I dont think i still have warranty cause i bought it as used from a friend, How do i find the correct Firmware as you say i dont need to unlock anything i might have tried with the wrong version. Also i believe its a global version.
Coolpenisbro said:
I dont think i still have warranty cause i bought it as used from a friend, How do i find the correct Firmware as you say i dont need to unlock anything i might have tried with the wrong version. Also i believe its a global version.
Click to expand...
Click to collapse
No worries. You will have to try a couple of fastboot firmwares.
For each of them, you need to use the latest MiFlash Tool and make sure that CLEAN ALL only option is selected.
One thing to note here is that once you select the firmware folder in MiFlash, it automatically switches to Clean All and Lock
So you better make sure to look well and switch to CLEAN ALL only again before you hit the Flash button.
Latest Global:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Latest Global EEA:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Not so latest China Stable:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
I couldn't find the latest fastboot version for China. Make sure you download fastboot versions for all of these and try one by one. At least one of these have to work for your bootloader.
If these don't work then we could try Indonesia, Turkey, Taiwan and Russia firmwares. No way none of them works.
Edit: Idk how it selected Bold but nvm. Also, these steps will wipe all data on phone. Will be like a factory reset.
Give this a try first, who knows it might work lol.
How to Fix “The System Has Been Destroyed” Issue on Xiaomi Phones - Techtrickz
Xiaomi smartphones usually work flawlessly, but sometimes it may act weirdly. An OTA update can cause the issue and sometimes it happened without any intervention by users. OTA updates sometimes will brick the phone leaving the message ‘the system has been destroyed’ on the boot screen. For...
techtrickz.com
Unknown.Guy said:
Give this a try first, who knows it might work lol.
How to Fix “The System Has Been Destroyed” Issue on Xiaomi Phones - Techtrickz
Xiaomi smartphones usually work flawlessly, but sometimes it may act weirdly. An OTA update can cause the issue and sometimes it happened without any intervention by users. OTA updates sometimes will brick the phone leaving the message ‘the system has been destroyed’ on the boot screen. For...
techtrickz.com
Click to expand...
Click to collapse
Dude thanks for your efforts in trying to Help. In the end i refunded my Money wich i paid to the first unlocking guy and looked on Telegram, where i found a 100% legit dude. he flashed it on first try. also he was ok with an afterwards payment + he was only 25€. I can link his page if someone is interested.