Unbrick fastboot mode - Nubia Red Magic 3 Questions & Answers

After i i flash custom rom the i cant turn on the wifi so i decided to reset factory of my red magic 3 but after a rest i got stuck in FASTBOOT MODE no matter what i choice from reboot from recovery mode or reboot from system it will just restart and back again to FASTBOOT MODE can some one help me please is this permanent brick?
I USE ALL COMMANDS BUT DON'T WORK :
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot oem nubia_unlock NUBIA_NX629J
...
(bootloader) START update nubia fastboot unlock flag!!!
(bootloader) set state to 1 ok!!!
OKAY [ 0.011s]
finished. total time: 0.011s
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot flash vbmeta vbmeta.img
target reported max download size of 805306368 bytes
sending 'vbmeta' (8 KB)...
OKAY [ -0.000s]
writing 'vbmeta'...
OKAY [ -0.000s]
finished. total time: 0.016s
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot flash dsp dspso.bin
target reported max download size of 805306368 bytes
sending 'dsp' (65536 KB)...
OKAY [ 1.819s]
writing 'dsp'...
OKAY [ 0.406s]
finished. total time: 2.230s
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot flash splash splash.img
target reported max download size of 805306368 bytes
sending 'splash' (7419 KB)...
OKAY [ 0.219s]
writing 'splash'...
OKAY [ 0.031s]
finished. total time: 0.266s
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot flash modem NON-HLOS.bin
target reported max download size of 805306368 bytes
sending 'modem' (144196 KB)...
OKAY [ 4.018s]
writing 'modem'...
OKAY [ 0.869s]
finished. total time: 4.888s
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot flash boot boot.img
target reported max download size of 805306368 bytes
sending 'boot' (98304 KB)...
OKAY [ 2.780s]
writing 'boot'...
OKAY [ 0.469s]
finished. total time: 3.253s
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot flash dtbo dtbo.img
target reported max download size of 805306368 bytes
sending 'dtbo' (8192 KB)...
OKAY [ 0.234s]
writing 'dtbo'...
OKAY [ 0.063s]
finished. total time: 0.297s
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magi
erasing 'system'...
OKAY [ 0.172s]
sending sparse 'system' (767446 KB)...
OKAY [ 24.161s]
writing 'system'...
OKAY [ 0.016s]
sending sparse 'system' (786430 KB)...
OKAY [ 33.767s]
writing 'system'...
OKAY [ 0.016s]
sending sparse 'system' (744616 KB)...
OKAY [ 30.043s]
writing 'system'...
OKAY [ -0.000s]
sending sparse 'system' (786429 KB)...
OKAY [ 37.173s]
writing 'system'...
OKAY [ 0.003s]
sending sparse 'system' (532404 KB)...
OKAY [ 26.319s]
writing 'system'...
OKAY [ 0.002s]
finished. total time: 151.675s
C:\Users\PC-NaMi\Downloads\NX629J-update_2.30>fastboot flash recovery recovery.img
target reported max download size of 805306368 bytes
sending 'recovery' (98304 KB)...
OKAY [ 2.800s]
writing 'recovery'...
OKAY [ 0.523s]
finished. total time: 3.339s

Instructions are everywhere. Follow them, or forever hold your peace.

after "fastboot flash recovery recovery.img"
write fastboot oem nubia_lock NUBIA_NX629J
and then fastboot reboot
u will get into recovery mode

Sir my Nubia red Magic 3 stuck on logo can any one help me please

Related

Cant load phone to recovery mode

I was trying to install rom and something got wrong with phone it just keep restarting after huawei logo. I tryed to reinstall system through fastboot (FULL Huawei P7-L10C900B852)
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash cust cust.img
target reported max download size of 536870912 bytes
sending 'cust' (400995 KB)...
OKAY [ 15.426s]
writing 'cust'...
OKAY [ 18.747s]
finished. total time: 34.176s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (8072 KB)...
OKAY [ 0.312s]
writing 'boot'...
OKAY [ 0.654s]
finished. total time: 0.970s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash cache cache.img
target reported max download size of 536870912 bytes
sending 'cache' (8296 KB)...
OKAY [ 0.320s]
writing 'cache'...
OKAY [ 0.423s]
finished. total time: 0.745s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash userdata userdata.img
target reported max download size of 536870912 bytes
sending 'userdata' (132497 KB)...
OKAY [ 5.089s]
writing 'userdata'...
OKAY [ 6.829s]
finished. total time: 11.921s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash system system.img
target reported max download size of 536870912 bytes
sending sparse 'system' (523522 KB)...
OKAY [ 20.682s]
writing 'system'...
OKAY [ 24.469s]
sending sparse 'system' (523531 KB)...
OKAY [ 20.890s]
writing 'system'...
OKAY [ 24.489s]
sending sparse 'system' (454037 KB)...
OKAY [ 18.014s]
writing 'system'...
OKAY [ 21.367s]
finished. total time: 129.919s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (13188 KB)...
OKAY [ 0.510s]
writing 'recovery'...
OKAY [ 1.064s]
finished. total time: 1.577s
Now when i turn on phone it allways loads fastboot menu. When i try to load recovery menu it fails just keep restartint. Tryed curstom recovery like twrp and cwm, and also cant run.
danixlt said:
I was trying to install rom and something got wrong with phone it just keep restarting after huawei logo. I tryed to reinstall system through fastboot (FULL Huawei P7-L10C900B852)
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash cust cust.img
target reported max download size of 536870912 bytes
sending 'cust' (400995 KB)...
OKAY [ 15.426s]
writing 'cust'...
OKAY [ 18.747s]
finished. total time: 34.176s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (8072 KB)...
OKAY [ 0.312s]
writing 'boot'...
OKAY [ 0.654s]
finished. total time: 0.970s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash cache cache.img
target reported max download size of 536870912 bytes
sending 'cache' (8296 KB)...
OKAY [ 0.320s]
writing 'cache'...
OKAY [ 0.423s]
finished. total time: 0.745s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash userdata userdata.img
target reported max download size of 536870912 bytes
sending 'userdata' (132497 KB)...
OKAY [ 5.089s]
writing 'userdata'...
OKAY [ 6.829s]
finished. total time: 11.921s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash system system.img
target reported max download size of 536870912 bytes
sending sparse 'system' (523522 KB)...
OKAY [ 20.682s]
writing 'system'...
OKAY [ 24.469s]
sending sparse 'system' (523531 KB)...
OKAY [ 20.890s]
writing 'system'...
OKAY [ 24.489s]
sending sparse 'system' (454037 KB)...
OKAY [ 18.014s]
writing 'system'...
OKAY [ 21.367s]
finished. total time: 129.919s
C:\Users\Donis\Desktop\asd\HUAWEI>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (13188 KB)...
OKAY [ 0.510s]
writing 'recovery'...
OKAY [ 1.064s]
finished. total time: 1.577s
Now when i turn on phone it allways loads fastboot menu. When i try to load recovery menu it fails just keep restartint. Tryed curstom recovery like twrp and cwm, and also cant run.
Click to expand...
Click to collapse
Have you tried doing a force update? Just create a folder on your SD card called "dload" then copy the update.app to that folder and when your phone is turned off, hold down all three buttons to perform a forced update.

xt1068 hang on logo

hi to all
i try many stock firmware without success show preflash validation failed
only 2 firmware flash ok
XT1068_TITAN_RETAILDSDS_6.0_MPB24.65-34-3_cid7_CFC.xml
XT1068_TITAN_RETDE_6.0_MPB24.65-34-3_cid7_CFC.xml
but at the end phone not factory reset and hang on logo
what can i do please any help
Code:
Easy Installer - Marshmallow 6.x Moto G (2nd Gen) 2014
For XT1063, XT1064, XT1068 and XT1069
Plug in USB CABLE and Put Phone in AP FASTBOOT Flash Mode
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
To cancel choose option 6
Choose a option:
1 - Flash stock ROM
2 - Flash stock ROM and ReLock Bootloader
3 - Flash Fixed Logo
4 - Reboot Phone
5 - Factory Reset
6 - Exit
Select your option : 1
RETURNING TO STOCK ROM - FLASHING PARTITIONS.
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.073s]
writing 'partition'...
OKAY [ 0.354s]
finished. total time: 0.434s
FLASHING BOOT LOADER..
target max-sparse-size: 256MB
sending 'motoboot' (2184 KB)...
OKAY [ 0.128s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.052s]
finished. total time: 1.187s
FLASHING LOGO...
target max-sparse-size: 256MB
sending 'logo' (697 KB)...
OKAY [ 0.073s]
writing 'logo'...
OKAY [ 0.076s]
finished. total time: 0.153s
FLASHING BOOT....
target max-sparse-size: 256MB
sending 'boot' (10200 KB)...
OKAY [ 0.375s]
writing 'boot'...
OKAY [ 0.630s]
finished. total time: 1.013s
FLASHING RECOVERY.....
target max-sparse-size: 256MB
sending 'recovery' (10280 KB)...
OKAY [ 0.377s]
writing 'recovery'...
OKAY [ 0.634s]
finished. total time: 1.020s
FLASHING SYSTEM IMAGE IN MULTIPLE SECTIONS......
target max-sparse-size: 256MB
sending 'system' (257467 KB)...
OKAY [ 8.238s]
writing 'system'...
OKAY [ 8.142s]
finished. total time: 16.389s
target max-sparse-size: 256MB
sending 'system' (257371 KB)...
OKAY [ 8.253s]
writing 'system'...
OKAY [ 7.901s]
finished. total time: 16.163s
target max-sparse-size: 256MB
sending 'system' (257534 KB)...
OKAY [ 8.245s]
writing 'system'...
OKAY [ 7.716s]
finished. total time: 15.968s
target max-sparse-size: 256MB
sending 'system' (248321 KB)...
OKAY [ 7.952s]
writing 'system'...
OKAY [ 8.538s]
finished. total time: 16.499s
FLASHING MODEM.......
target max-sparse-size: 256MB
sending 'modem' (50136 KB)...
OKAY [ 1.642s]
writing 'modem'...
OKAY [ 0.844s]
finished. total time: 2.492s
erasing 'modemst1'...
OKAY [ 0.012s]
finished. total time: 0.014s
erasing 'modemst2'...
OKAY [ 0.041s]
finished. total time: 0.043s
target max-sparse-size: 256MB
sending 'fsg' (652 KB)...
OKAY [ 0.078s]
writing 'fsg'...
OKAY [ 0.086s]
finished. total time: 0.171s
ERASING CACHE ......
erasing 'cache'...
OKAY [ 0.017s]
finished. total time: 0.020s
Choose a option:
1 - Flash stock ROM
2 - Flash stock ROM and ReLock Bootloader
3 - Flash Fixed Logo
4 - Reboot Phone
5 - Factory Reset
6 - Exit
Select your option : 3
FlASHING FIXED LOGO...
target max-sparse-size: 256MB
sending 'logo' (480 KB)...
OKAY [ 0.082s]
writing 'logo'...
OKAY [ 0.058s]
finished. total time: 0.143s
Done!...............
Choose a option:
1 - Flash stock ROM
2 - Flash stock ROM and ReLock Bootloader
3 - Flash Fixed Logo
4 - Reboot Phone
5 - Factory Reset
6 - Exit
Select your option :
bendou said:
hang on logo
what can i do please any help
Click to expand...
Click to collapse
do you have the bootloader unlocked ? and if is unlocked install TWRP and make a factory reset . and if the phone don't start try some custom roms. or just click the number 5 on that
software you are using for flash .

[Q]-USB 2.0 don't work to flash system.img

C:\Program Files (x86)\Minimal ADB and Fastboot\NX629J_Z69_EN_WPJ0O_V209>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magic
erasing 'system'...
OKAY [ 0.016s]
sending sparse 'system' 1/5 (768623 KB)...
OKAY [ 26.609s]
writing 'system' 1/5...
OKAY [ 0.010s]
sending sparse 'system' 2/5 (753639 KB)...
OKAY [ 31.166s]
writing 'system' 2/5...
OKAY [ 0.010s]
sending sparse 'system' 3/5 (776366 KB)...
OKAY [ 32.717s]
writing 'system' 3/5...
OKAY [ 0.008s]
sending sparse 'system' 4/5 (786429 KB)...
OKAY [ 32.807s]
writing 'system' 4/5...
OKAY [ 0.004s]
sending sparse 'system' 5/5 (138400 KB)...
FAILED (data write failure (Unknown error))
finished. total time: 136.141s
Click to expand...
Click to collapse
i try use usb port 3.0, nothing, i try use usb port 2.0, nothing, i try another cable, nothing....

Failed Root and serious troubles with flashing stock ROM on MOTO G6 XT1925-4 (solved)

Hello everyone, I own a Moto g6 xt1925-4 and I decided to root the device. First thing I unlocked the bootloader, it worked (with bad key logo). Second, I flashed TWRP, which I downloaded the IMG of from the official thread here on XDA. Third, I flashed the no-verity modified image: now I think I made a mistake because I flashed a OPS image which I should suppose is Oreo but the device was already updated to PIE.
Then the troubles started. I couldn't flash magisk, so I tricked too much on the MOUNT page on TWRP, perhaps I have mounted system or storage, then I also pulled out the USB cable without safe ejection and in the end, when I rebooted the phone in Bootloader mode and pushed Start, nothing happened at all.
I thought then: I have to restore to stock. I followed the procedure on the thread here on XDA, and I should say, something happened, but strange.
Now the phone boots up, but goes in a kind of a strange bootloop, because sometimes it says the "hello moto", sometimes not, sometimes it even starts the initial configuration, but the screen flashes on and off at random, and a few centimeters of the bottom screen are black. This happened also on TWRP recovery, the bottom part of the screen appeared cut by 2/3 centimeters.
Now I surely made mistakes, but I can't get what's wrong, and most of all this in going to get me crazy. I'm near to desperation, so I pray you to help me, please!
This is the result of the stock firmware flash I tried twice. I can see a couple of "failed" and "no such files"
Microsoft Windows XP [Versione 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Programmi\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
target reported max download size of 534773760 bytes
sending 'partition' (45 KB)...
OKAY [ 0.020s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.090s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash bootloader bootloader.img
target reported max download size of 534773760 bytes
sending 'bootloader' (7419 KB)...
OKAY [ 0.250s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Security version downgrade
(bootloader) Image aboot failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'bootloader.default.xml'
FAILED (remote failure)
finished. total time: 0.461s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash modem NON-HLOS.bin
target reported max download size of 534773760 bytes
sending 'modem' (71577 KB)...
OKAY [ 10.255s]
writing 'modem'...
OKAY [ 0.571s]
finished. total time: 10.836s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash fsg fsg.mbn
target reported max download size of 534773760 bytes
sending 'fsg' (6780 KB)...
OKAY [ 2.464s]
writing 'fsg'...
OKAY [ 0.100s]
finished. total time: 2.564s
C:\Programmi\Minimal ADB and Fastboot>fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.020s]
finished. total time: 0.020s
C:\Programmi\Minimal ADB and Fastboot>fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.020s]
finished. total time: 0.020s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash bluetooth BTFM.bin
error: cannot load 'BTFM.bin': No such file or directory
C:\Programmi\Minimal ADB and Fastboot>fastboot flash dsp dspso.bin
error: cannot load 'dspso.bin': No such file or directory
C:\Programmi\Minimal ADB and Fastboot>fastboot flash boot boot.img
target reported max download size of 534773760 bytes
sending 'boot' (22528 KB)...
OKAY [ 3.515s]
writing 'boot'...
(bootloader) Image signed with key bad key
OKAY [ 0.300s]
finished. total time: 3.815s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.0
target reported max download size of 534773760 bytes
sending 'system' (259756 KB)...
OKAY [ 65.294s]
writing 'system'...
OKAY [ 2.293s]
finished. total time: 67.587s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.1
target reported max download size of 534773760 bytes
sending 'system' (253441 KB)...
OKAY [ 27.379s]
writing 'system'...
OKAY [ 1.763s]
finished. total time: 29.142s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.2
target reported max download size of 534773760 bytes
sending 'system' (254074 KB)...
OKAY [ 32.957s]
writing 'system'...
OKAY [ 1.773s]
finished. total time: 34.730s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.3
target reported max download size of 534773760 bytes
sending 'system' (260545 KB)...
OKAY [ 44.554s]
writing 'system'...
OKAY [ 1.803s]
finished. total time: 46.357s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.4
target reported max download size of 534773760 bytes
sending 'system' (259733 KB)...
OKAY [ 28.171s]
writing 'system'...
OKAY [ 1.813s]
finished. total time: 29.983s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.5
target reported max download size of 534773760 bytes
sending 'system' (246724 KB)...
OKAY [ 36.092s]
writing 'system'...
OKAY [ 1.682s]
finished. total time: 37.794s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.6
target reported max download size of 534773760 bytes
sending 'system' (246141 KB)...
OKAY [ 24.425s]
writing 'system'...
OKAY [ 1.702s]
finished. total time: 26.148s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.7
target reported max download size of 534773760 bytes
sending 'system' (262029 KB)...
OKAY [ 26.448s]
writing 'system'...
OKAY [ 1.933s]
finished. total time: 28.391s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.8
target reported max download size of 534773760 bytes
sending 'system' (262001 KB)...
OKAY [ 26.198s]
writing 'system'...
OKAY [ 1.803s]
finished. total time: 28.010s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechu
nk.9
target reported max download size of 534773760 bytes
sending 'system' (25072 KB)...
OKAY [ 2.654s]
writing 'system'...
OKAY [ 0.170s]
finished. total time: 2.824s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash vendor vendor.img_sparsechu
nk.0
target reported max download size of 534773760 bytes
sending 'vendor' (260148 KB)...
OKAY [ 35.711s]
writing 'vendor'...
OKAY [ 2.023s]
finished. total time: 37.744s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash vendor vendor.img_sparsechu
nk.1
target reported max download size of 534773760 bytes
sending 'vendor' (178315 KB)...
OKAY [ 16.644s]
writing 'vendor'...
OKAY [ 1.412s]
finished. total time: 18.056s
C:\Programmi\Minimal ADB and Fastboot>fastboot erase carrier
erasing 'carrier'...
OKAY [ 0.040s]
finished. total time: 0.040s
C:\Programmi\Minimal ADB and Fastboot>fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.080s]
finished. total time: 0.080s
C:\Programmi\Minimal ADB and Fastboot>fastboot erase DDR
erasing 'DDR'...
OKAY [ 0.010s]
finished. total time: 0.010s
C:\Programmi\Minimal ADB and Fastboot>fastboot flash logo logo.bin
target reported max download size of 534773760 bytes
sending 'logo' (2182 KB)...
OKAY [ 0.681s]
writing 'logo'...
OKAY [ 0.060s]
finished. total time: 0.751s
C:\Programmi\Minimal ADB and Fastboot>fastboot reboot
EDIT:
Good news, at least for me. I solved by flashing the PIE STOCK ROM, despite I liked OREO the most, I find this PIE slower and less smooth but anyways, that's it, I have my phone back.
But still..... I can't get the root, but that's fine, I'm still enjoying the feel of victory... maybe I'll try, some day...

[SHARE] SailfishOS 4.4.0.64 for Pro¹ X

We will flash the ubuntu touch boot image which is required temporarily. And the currently latest sfos build for the QX1050.
1. Download ubuntu touch build from here and extract the boot.img
Ubuntu for Pro¹ X build job 2830649718 artifact.zip
2. Download SailfishOS 4.4.0.64 build from here and extract the userdata.simg
SailfishOS for Pro¹ X job 2807435728 artifact.zip
3. Flash using fastboot
Code:
fastboot flash boot_a boot.img
fastboot flash userdata userdata.simg
4. Reboot using fastboot reboot or fastboot continue
Thanks for moving mods! Did not realize its more appropriate here in the guides section than in the development section.
fastboot flash userdata userdata.img
fastboot flash userdata userdata.simg Typo
Nope, the sailfish userdata is in sparse format. So its .simg correctly.
Thats why you will not have the infamous "Invalid sparse file format at header magic" message from fastboot when flashing that .simg. Since fastboot expects sparse images, but *****es about raw images like the ubuntu boot.img above.
Weird I'm getting this error
fastboot flash userdata userdata.simg
error: cannot load 'userdata.simg'
But this command works
fastboot flash userdata userdata.img
target reported max download size of 268435456 bytes
sending sparse 'userdata' (258052 KB)...
OKAY [ 7.558s]
writing 'userdata'...
OKAY [ 1.624s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.864s]
writing 'userdata'...
OKAY [ 1.656s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 8.295s]
writing 'userdata'...
OKAY [ 1.634s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.826s]
writing 'userdata'...
OKAY [ 1.583s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.828s]
writing 'userdata'...
OKAY [ 1.617s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.858s]
writing 'userdata'...
OKAY [ 1.681s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.751s]
writing 'userdata'...
OKAY [ 1.655s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.592s]
writing 'userdata'...
OKAY [ 1.694s]
sending sparse 'userdata' (147988 KB)...
OKAY [ 4.536s]
writing 'userdata'...
OKAY [ 0.971s]
finished. total time: 81.497s
It doesn't boot
bobnot said:
Weird I'm getting this error
fastboot flash userdata userdata.simg
error: cannot load 'userdata.simg'
But this command works
fastboot flash userdata userdata.img
target reported max download size of 268435456 bytes
sending sparse 'userdata' (258052 KB)...
OKAY [ 7.558s]
writing 'userdata'...
OKAY [ 1.624s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.864s]
writing 'userdata'...
OKAY [ 1.656s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 8.295s]
writing 'userdata'...
OKAY [ 1.634s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.826s]
writing 'userdata'...
OKAY [ 1.583s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.828s]
writing 'userdata'...
OKAY [ 1.617s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.858s]
writing 'userdata'...
OKAY [ 1.681s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.751s]
writing 'userdata'...
OKAY [ 1.655s]
sending sparse 'userdata' (258040 KB)...
OKAY [ 7.592s]
writing 'userdata'...
OKAY [ 1.694s]
sending sparse 'userdata' (147988 KB)...
OKAY [ 4.536s]
writing 'userdata'...
OKAY [ 0.971s]
finished. total time: 81.497s
It doesn't boot
Click to expand...
Click to collapse
what version of the android platform tools are you using? I'm on r33.0.2 and "fastboot flash userdata userdata.simg" works just fine for me
Ah, i guess you are flashing the ubuntu image then?
For sailfish, we need only the boot.img from the first posted ubuntu artifacted.
But the userdata.simg from sailfish contained in the second artifact linked below.
eltmosen said:
Ah, i guess you are flashing the ubuntu image then?
For sailfish, we need only the boot.img from the first posted ubuntu artifacted.
But the userdata.simg from sailfish contained in the second artifact linked below.
Click to expand...
Click to collapse
Neither SFOS or UT will boot
I also updated to latest fastboot from googles source. Still same issue as previously stated.

Categories

Resources