Alright, first piece out of the gate:
I've had this Droid Turbo for a while(4 years); custom rom'd it multiple times seeking the best interface for it, and set it down for half a year in favor of a Blackberry. Having picked the Turbo back up, I attempted to run a boot on it, but it continued to black-screen and freeze in the middle of start-up. After using multiple TWRP backups to try and locate a working version, I've set down on one of the custom roms posted in the Motorola Droid Turbo forums. I can't tell you exactly which cause frankly I don't know. I've isolated the issue to the radio firmware malfunctioning with any of the roms, including the stock rom. Proving this with attempting to turn on the Wifi or turning off Airplane mode in one of the roms I had it disabled/enabled in, I'd attempt to turn on the radio, resulting in an immediate system freeze, and quickly followed by a full reboot. So I'm wondering if there's are more methods to revert radio firmware since TWRP's not allowing me to install a radio zip file under the pretense that the Meta-data/ Folder normally found in rom Zips can not be found. I can post About specs, so perhaps there will be someone in the community who may have some suggestions.
TWRP version: 3.0.2.0
Motorola Droid Turbo (XT1254) (32gb)
Android Version: 6.0.1
Android security patch level: September 1, 2016
Configuration version: I15.MOT.XT1254.0
Baseband version: MDM9625_104651.11.05.16.03R QUARK_CUST
Kernal version: 3.10.40-perf-gcd46769
System version: 24.81.5.quark_verizon.verizon.en.US
Build number: MCG24.251-5
Related
Just to get through the background information on my Dell Streak 7
Dell Streak 7 (3G+WiFi T-Mobile Version)
Android Version: 3.1
Model Number: Streak7
OEM Version: StreakDroid HD
Build Number: StreakDroid7 HDv1
It's been awhile since I used my Dell Streak and I have two quick questions about it.
The first being on how exactly would I go about updating my roms with StreakDroid? I remember having problems with trying to update from stock to the latest revision of StreakDroid (or HoneyStreak) and would constantly get stuck in bootloops or no booting at all. I found most of the files over at http://d-h.st/users/TheManii/?fld_id=5697#files But I am unsure on which order I need to update from considering I am at HDv1 and the latest is already in 2.0.
My second question is where can I find the stock rom for this device? Right now I'm trying to get Kindle Books to work correctly on my droid with it's current rom, however it's crashing whenever I go to sample any books on the device. (Again, I am using the rom mentioned above in the stats. Not the default stock rom that comes with all Streak7's.)
Any help appreciated.
Back to stock recovery, help!
Hi, need help with my beloved Moto G (XT 1063). I rooted it, installed custom recovery and image and used it for months like that, two days ago went back to stock (restored from nandroid backup) and got a message about the new OTA update, download it but TWRP cannot install it, the phone just turns off again and again. Restored it once more, but this time did not give it a go to update. My question is, is it possible to flash just the original recovery (for Lollipop) and how in order to update the phone, or is it possible to stop the phone warning me about the new software being available all the time (so annoying). Thanks for any input.
Same here. My wife just got a new Zenfone 2, so I'm giving her Moto G 2014, XT1063 to my daughter.
I want to get it back to stock so it can get all the updates.
It currently has TWRP installed and is rooted.
Every single link I've found here in the XDA forum for the stock firmware for this phone is dead. The links all say they were pulled because of TOS violations.
Anyone have a mirror? Or are there any flashable zips that work with TWRP to get this phone current?
Here is the current About Phone information:
Android version
4.4.4
Baseband version
MSM8626BP_1032.394.88.00R,
RETUSA_GLB_CUST
Kernel version
3.4.42-g6c9aef2-00110-gd543d01
[email protected] #1
Thu Jul 24 16:10:12 CDT 2014
System version
21.11.17.titan_retuglb.retuglb.en.US retus
Build number
KXB21.85-17
http://i.imgur.com/jdxfXFB.png
Have you checked these links?
http://forum.xda-developers.com/showthread.php?t=3153533
For me the links are working but I know that Mega isn't allowed in all countries.
If you want to download with your mobile you need the Mega app, on your PC it can be done with the browser.
Choose the right firmware for your phone, extract the recovery.img and flash it.
Use the full unroot function of the superSU.
Sent from my XT1068
Hi all,
Let me start off by saying hello. I just joined these forums, and sadly I already have to bother you with an issue. Hopefully you can help me.
Recently, I decided to unlock the bootloader of my Moto G 2014 and install CM12.1. Sadly, Cyanogenmod stopped working after I installed Google Apps (from OpenGApps).
I then installed stock Marshmallow, using this tutorial. It got stuck on the boot animation.
Finally, I installed the stock Lollipop 5.0.2 firmware (the version I came from). It works now, but everytime I power the device up, it boots straight into TWRP. I can boot it normally using the bootloader, though. Also, when I try to lock the bootloader again, it won't boot at all (probably because I have TWRP on it).
This isn't an issue for me, but I upgraded to a Nexus 5X yesterday, and I'm giving my Moto G to my little sister, who is currently using a Nokia Lumia 635. I want the device to function as it should before I give it to her. Therefore, I'd like to do a complete wipe of my phone, and install the stock firmware, just like it was before I unlocked the bootloader. I could use some help with it.
My main concern is the fact that it boots into TWRP. Is there any way to fix this? Can I install the normal recovery mode again?
As for the firmware I was using, it was Android 5.0.2:
System version: 22.21.28.titan_retaildsds.retaildsdsall.en.03
Kernel version: 3.4.42-g48d3b85
Build number: LXB22.46-28
I can provide additional info, as I do have the stock ROM installed atm.
Thanks in advance!
P.S. I do also have SuperSU installed on the phone, but it says there is 'no SU binary installed'. It seems something went wrong there as well. Not too bothered by it, as I don't want it rooted, but I figured it was worth mentioning.
My Nexus 6 received 7.0 update notification and I would like to wait for 7.1 to upgrade together. But yesterday the 7.0 notification suddenly gone, I've manually check the update but the system said my phone already get the latest update. Then I've checked the version of my Nexus 6, it is MOB31H, I don't remember whether I have the November update. Now I have few questions and hope someone can help me.
1. Why the 7.0 update notification suddenly gone?
2. I've checked the Full OTA images, the Nov update contains MMB31C and MOB31K, If I would like to manually apply the update, which one should I use? (My Nexus 6 is international version XT1103)
3. If i manually apply the the Full OTA Images on Nov update by adb sideload, will all the data being erased and need to re-config and reinstall all apps?
Thanks so much in advance for your help.
1. Unknown
2. Your device model doesn't matter as the OTA zips work on both, but based on the model number you gave, you have a US device. The international unit is XT1100. Use the version with the code ending in "K" if wanting Android 6.x. Android 7.x uses codes starting with "N".
3. Flashing an OTA zip will not cause loss of data.
Strephon Alkhalikoi said:
1. Unknown
2. Your device model doesn't matter as the OTA zips work on both, but based on the model number you gave, you have a US device. The international unit is XT1100. Use the version with the code ending in "K" if wanting Android 6.x. Android 7.x uses codes starting with "N".
3. Flashing an OTA zip will not cause loss of data.
Click to expand...
Click to collapse
Thanks so much for your help, I think I mis-type the model, XT1100 international should be correct.
I've just sideloaded the version MOB31K successfully and will wait for the 7.1 fix on the speaker phone echo problem before upgrade to 7.1.
Please don't mind to ask one more question, i guess the MMB31C and MOB31K is for US and International model respectively. On version Nougat, no different on XT1103 and XT1100, one version for both model?
Thanks so much again for your help.
Or you could sideload NBD91X, which is Nougat without the speakerphone problem.
@mega23mac: MMB31C is for CDMA devices in the US, if I recall correctly. As @dahawthorne points out, you could install a 7.0 OTA, but if you don't need the speakerphone, the 7.1 OTA works just fine. Google should have it patched for next month's security update.
Hi All,
I bought a used S4, I would like to do 1 of 2 things, and want to note that I've never messed with a phones OS, rooting, or anything previously on any device.
I just need 6.0 pre march-17 security patch, OR, some way to make 1 app a system app. I think these are my only 2 options. Correct me if i'm wrong. Please let me know which is easier, and if anyone has a link to a guide that is still up to date, I would highly appreciate it. (I have attached images of "about device to assist")
I am assuming I need to either:
1) Install to Android 6.0, w/ Security patch prior to March 2017 (dec 2016 is perfect!) I know this will suit my needs.
OR
2) Root the 5.0.1 w/ Magisk. (hide root access from an app as well.) (Goal here is to make 1 app a system app, thats it!)
My issue is, I see A LOT of out-dated posts to root. - I went to TWRP when reading guide to ensure i can find all files i'll need before beginning, and TWRP website Says: "Only the earliest S4 for AT&T has a bootloader that is vulnerable to loki. If you took any updates or bought your device later on, you cannot install TWRP. Chances are, if you don't already have TWRP installed, you cannot use TWRP. Our images are already patched with loki so just root and flash. You cannot flash TWRP with Odin on this model." So I don't even know if I can get this accomplished.
DEVICE NAME/MODEL NUMBER: SAMSUNG-SGH-I537
ANDROID VERSION: 5.0.1
BASEBAND: I537UCSCOC8
KERNEL: 3.4.0-4554112
[email protected] #1
BUILD # LRX22C.I537UCSCOC8
SECURITY ENHANCEMENTS: SEPF_SAMSUNG-SGH-I537_5.0.1_0009
sECURITY VERSION: MDF V1.0 RELEASE 4 / VPN V1.4 RELEASE 4.1 / ASKS V1.2_161011
KNOX VERSION: 2.3
If you need any other info, lmk please.
Thank you!!