Presenting my first kernel for our oxygen Device which will right now only work for aosp or los based roms.
Change logs V1:
--> Added governers :
1) lionheart
2) zzmove
3) smartassv2
4) conservativex
5) impulse
6) alucard
7) intelllactive
8) bioshock
-->I/O schedulers :
1) fiops
2) sio
3) sioplus
4) tripndroid
5) zen
6) fifo
-> Converted to permmissive kernel
-> Optimization included
Change logs V2:
--> compiled with UBER TOOLCHAIN 4.9
--> ADDED INTERACTIVEX AND BARRY_ALLEN(BEAST) GOVERNER
-> ADDED FAUX CONTROL SOUND TO ADDITIONAL INCREASE OR DECREASE EVERY SOUND
---> ADDED KCAL SUPPORT(TUNE YOUR SCREEN COLORS LOL)
Change logs V3:
Now hard_rock kernel works fully for miui custom roms too..
--> added EXfat and NTFS filesystem support
-->included 3 more governers:
DARKNESS
INTERACTIVE PRO
SMARTASSH3
Change logs V4:
Now not supporting MIUI stock based roms since i am tired of handling three different Kernels and miui is not perfectly working. If someone still want to flash my kernel for miui then flash rr_fix kernel. But it might not work perfectly
quick charging upto 3200ma,
dynamic fsync
added governer wave and hyper
Change logs v5
Latest updated LInux base to 3.18.112 may 30 2018 ..most well optimized kernel
brightness fixed
enjoy :good::good:
Change logs 4.2 and 5.1
--> added cpu overclock to 2.4 ghz and gpu overclock to 855 mhz
--> Added two version zip for overclock since if users are not happy with base 3.18.112 they can flash v4 OC zip and
v5 overclock ZIP is for user who want it over v5 upgrade
Change logs V6
--> added underclock to 420 mhz
--> added quick charge .(max takes 2.5 hrs which is recommended)
V7 UPDATE LIST :
updated LInux base to 3.18.113 with no sound issue like before
Added total 23 different governers : Change log oreo v15.1:
--> Fixed screen flickering or ghost screen for few users while overclocking gpu to 1300 mhz
THats it..since I am on vacation and don't want any further pain
Download link v15.1 oreo : https://www.androidfilehost.com/?fid=3700668719832237063
here are list:
* Barry Allen
* Bioshock
* Blu Active
* ConservativeX
* Electrodemand
* Hyper
* DanceDance
* Impuls
* Intelliactive
* Intellidemand
* Interactive Pro
* InteractiveX
* Lionfish
* Lionhearth
* Ondemand Plus
* Pegasusq
* Smartmax
* Yankactive
* Zzmoove
* Alucard
* darkness,
* darknessv5,
* and nightmare
increased fast charge limit
Revamp my github code
*** important : V7 might take some time on first boot so be patient
one more thing is v7 information might not be shown in about device section but you can see the info in Kernel auditor if you check..will fix it later
V8 UPDATE Change logs
Final update for Nougat (This will be final update for nougat):
Updated LInux kernel to 3.18.114
overclocked cpu to max 2.6 ghz
power suspend enabled
** I didnt tested this version since I am on oreo..so better have your backed up v7 kernel
V9 UPDATE Change logs
--> overclocking cpu upto 2.8 ghz
--> overclocking gpu 955 mhz
V9 UPDATE Change logs
--> update Linux kernel to 3.18.115
--> improve TCP speed
--> Added cpu governor Dynainteractive, SMARTMAX EPS , Cultivation
--> don't update idle time if cpu offline ( An offline cpu still has ts->idle_active == 1, that cause
off time is counted as idle time, and hence cause cpu load
calculated wrongly.
Check the cpu online status before updating the idle time to
fix it.)
--> optimize Kernel Samepage Merging (KSM)
--> deep sleep time reduced
V14 UPDATE Change logs
--> added electron governor
--> added maple i/o scheduler
--> added westwood tcp congestion
--> added wakelock control
** advancing direct to v14 since oreo v14 is having same features now..no diffs
V15 UPDATE Change logs
--> GPU min 100mhz and max 999 mhz
--> added ironactive governor
--> added f2fs support
V15.1 UPDATE Change logs
-->Fixed exfat sdcard issue.Exfat now working(Tested on 64gb and 128gb)
V16 UPDATE Change logs
--> overclocked gpu frequency upto 1300mhz
--> improved adreno gpu algorithm for better gpu rendering
V16.1 UPDATE Change logs
--> Fixed screen flickering or ghost screen for few users while overclocking gpu to 1300 mhz
V17 UPDATE Change logs
--> Upgraded Kernel to 3.18.122
V17.2 UPDATE Change logs
--> Upstreamed kernel to 3.18.123
--> Added OndemandX governor
V17.2 fix UPDATE Change logs
--> Updated wifi drivers
--> Improved response and speed overall
--> fixed some issues related to slowing down kernel due to linux 3.18.123 upstreamed version
--> adding again ondemandX governor
V17.3 UPDATE Change logs
--> Upstreamed kernel to 3.18.124
V18 UPDATE Change logs
Hardrock kernel v18 Nougat MIUI :
--> Upgrade prima drivers to LA.UM.7.6.r1-02800-89xx.0
--> probably more updated wlan drivers or connections with less battery drainage and more stabilty
--> Tweaked interactive governor
V20 UPDATE Change logs
Upstreamed kernel to ->
3.18.125
3.18.126
3.18.127
3.18.128
V20.1 UPDATE Change logs
--> Upstreamed kernel to 3.18.129
V20.2 UPDATE Change logs
--> Upstreamed kernel to 3.18.130
V21 UPDATE Change logs
-->Upstreamed kernel to latest 3.18.131
-->Overclocked cpu to 3 ghz and gpu to 1.6 ghz
-->added optimizations
V21.1 UPDATE Change logs
Added back hotplugs (intelliplug, lazyplug, msmhotplug, Alucard)
V22 UPDATE Change logs
Upstreamed to 3.18.132-136
some optimizations included
HOW TO INSTALL :
Just flash zip and you are done (clear cache and delvik as well)
DOWNLOAD
GDRIVE LINK: https://drive.google.com/open?id=1UllI1JlUxU36PkjnJP9pNopSiZHRelOq
GDRIVE LINK V2 : https://drive.google.com/file/d/1xoKOAmAq3KcCKtA9ogLCtHnvMs9MxbTU/view?usp=sharing
GDRIVE LINK V3 CUSTOM ROMS : https://drive.google.com/file/d/1li82ym6D8p_5EHB3VSNS7P99DJIXdq5-/view?usp=sharing
GDRIVE LINK V3 FOR MIUI BASED ROMS : https://drive.google.com/file/d/1XvYtpswHbAlFn3SJJkZBFN6Dcxvn3Agc/view?usp=sharing
V4 and above links androidfilehost : https://androidfilehost.com/?w=files&flid=273841
V6 Link : https://androidfilehost.com/?w=files&flid=273837
v7 link https://androidfilehost.com/?fid=818222786056040497
V8 link:
https://www.androidfilehost.com/?fid=5862345805528045261
Download link v9 : https://www.androidfilehost.com/?fid=5862345805528049264
Download link v9 miui : https://www.androidfilehost.com/?fid=5862345805528049352
miui link v10 : https://www.androidfilehost.com/?fid=5862345805528050677
custom rom v10 link : https://www.androidfilehost.com/?fid=5862345805528050700
v14 custom roms link : https://www.androidfilehost.com/?fid=5862345805528051228
v14 miui based rom link : https://www.androidfilehost.com/?fid=5862345805528051231
miui kernel v15 link : https://www.androidfilehost.com/?fid=5862345805528057744
custom rom support kernel v15 link : https://www.androidfilehost.com/?fid=5862345805528057759
V15.1 Links :
Miui nougat link : https://www.androidfilehost.com/?fid=5862345805528064636
For custom roms: https://www.androidfilehost.com/?fid=5862345805528064621
V16 Links:
MIUI Link : https://www.androidfilehost.com/?fid=5862345805528066091
For custom nougat roms : https://www.androidfilehost.com/?fid=5862345805528066096
Download link v16.1 MIUI nougat : https://www.androidfilehost.com/?fid=3700668719832237025
Download link v16.1 custom nougat : https://www.androidfilehost.com/?fid=1322778262903987030
Hardrock kernel V17 links :
custom nougat roms : https://www.androidfilehost.com/?fid=1322778262904009289
MIUI based roms : https://www.androidfilehost.com/?fid=1322778262904009307
Hardrock kernel V17.2 links :
MIUI NOugat : https://www.androidfilehost.com/?fid=1322778262904021749
custom nougat : https://www.androidfilehost.com/?fid=1322778262904021443
Hardrock kernel V17.2 fix links :
Latest miui link : https://www.androidfilehost.com/?fid=1322778262904026035
Hardrock kernel V17.3 links :
download for miui :https://www.androidfilehost.com/?fid=1322778262904027309
download for custom nougat: https://androidfilehost.com/?fid=1322778262904027558
Hardrock kernel V18 links :
Download link For miui: https://www.androidfilehost.com/?fid=11410932744536986541
Hardrock kernel v20 links :
https://www.androidfilehost.com/?fid=11410963190603864249
Hardrock kernel miui v20.1 links :
https://www.androidfilehost.com/?fid=11410963190603875674
Hardrock kernel v20.2 links :
For NOugat custom rom : https://www.androidfilehost.com/?fid=11410963190603877751
For miui roms : https://www.androidfilehost.com/?fid=11410963190603877749
Hardrock kernel v21 links :
For NOugat custom rom : https://www.androidfilehost.com/?fid=11410963190603885217
For miui roms : https://www.androidfilehost.com/?fid=11410963190603885214
Hardrock kernel v21.1 links :
Download link : https://www.androidfilehost.com/?fid=11410963190603890099
Hardrock kernel v22 links :
Download link : https://www.androidfilehost.com/?fid=1395089523397900775
Credits or Contributors:
my sincere thanks to all the devs who supported me mainly @Jay_B @pranavaryans @V_v3k @eva0034 @ROMFACTORY @Martichou and all my users
Donation link :
https://www.paypal.me/Hardrock83
Paytm and phonepe : 7010726092
My telegram channel : https://t.me/Hardrock_kernel or @hardrock_kernel
Kernel source : https://github.com/rakeshraimca/Xiaomi_Nougat_oxygen-
Version Information
Status: Stable
Current Stable Version: 16.1
Stable Release Date: 2018-09-08
XDA:DevDB Information
Hardrock Kernel v15 MIUI Extreme EDition UC OC EDITION , Kernel for the Xiaomi Mi Max 2
Contributors
Hard_Rock83
Kernel Special Features: overclocked snapdraon 625 to 2.8 ghz and gpu to 999 mhz with a lot of features
Version Information
Status: Stable
Current Stable Version: 22
Stable Release Date: 2018-08-02
Created 2018-07-27
Last Updated 2018-07-27
Hard_Rock83 said:
Presenting my first kernel for our oxygen Device which will right now only work for aosp or los based roms. Please don't try to flash on MIUI or wifi won't work
Change logs V1:
--> Added governers :
1) lionheart
2) zzmove
3) smartassv2
4) conservativex
5) impulse
6) alucard
7) intelllactive
8) bioshock
-->I/O schedulers :
1) fiops
2) sio
3) sioplus
4) tripndroid
5) zen
6) fifo
-> Converted to permmissive kernel
-> Optimization included
HOW TO INSTALL :
Just flash zip and you are done (clear cache and delvik as well)
DOWNLOAD
GDRIVE LINK: https://drive.google.com/open?id=1UllI1JlUxU36PkjnJP9pNopSiZHRelOq
Credits or Contributors:
Kernel source : https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/oxygen-n-oss
Thanks to iscle for providing optimized kernel source.
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-05-20
]** Important[/B] : Please Don't install it on miui stock based roms or you will face wifi related issues. wifi for miui is not working.
Click to expand...
Click to collapse
may i flash it on los15.1？
I think it won't work but u can try..and I didn't check for Oreo since we don't have any stable ROM yet..
bigrain2016 said:
may i flash it on los15.1？
Click to expand...
Click to collapse
Sent from my Mi MAX 2 using Tapatalk
Thank you so much bro for your hardwork
thank you very much
hope to see it on oreo when a stable ROM released
Finally a custom kernel. Thanks man.
Does it support quick charge?
Yes, it should support..
Irfan_ said:
Does it support quick charge?
Click to expand...
Click to collapse
Sent from my Mi MAX 2 using Tapatalk
Awesome work done brother, MI Max 2 has custom kernel too now.
Cool.
Thanks developer. May I ask you to add kcal support in the next build?
Tks so much. Im waiting so long for this.
hes_luckey said:
Thanks developer. May I ask you to add kcal support in the next build?
Click to expand...
Click to collapse
+1
hes_luckey said:
Thanks developer. May I ask you to add kcal support in the next build?
Click to expand...
Click to collapse
Sure, why not..
There are a lot more to come..like under clocking and over clocking, sound control, voltage control etc..
Will be adding more features in upcoming builds
Hard_Rock83 said:
Sure, why not..
There are a lot more to come..like under clocking and over clocking, sound control, voltage control etc..
Will be adding more features in upcoming builds
Click to expand...
Click to collapse
I just could say thank you for your hard work and looking forward your next builds.
Wish you the best
Hard_Rock83 said:
Sure, why not..
There are a lot more to come..like under clocking and over clocking, sound control, voltage control etc..
Will be adding more features in upcoming builds
Click to expand...
Click to collapse
Noob here.. i am trying my first ever custom rom on my mi max 2.. so not very familiar with the Pros / Cons of custom kernel. What are the benefits or limitations of flashing this custom kernel ? Thanks
jeffhart4890 said:
Noob here.. i am trying my first ever custom rom on my mi max 2.. so not very familiar with the Pros / Cons of custom kernel. What are the benefits or limitations of flashing this custom kernel ? Thanks
Click to expand...
Click to collapse
Its like someone is asking what's benefit of flashing custom ROM instead of stock...
The best description is u will get more control to tweak ur kernel at very best level..u can increase ur performance or make it balance or go for battery profile..it will provide more tweaks.
To know how to utilise governors and ioschedulers read this https://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
U might get more and more battery backup as well as ur phone performance also skyrocket.. Just go to the link and read.
Hard_Rock83 said:
I think it won't work but u can try..and I didn't check for Oreo since we don't have any stable ROM yet..
Click to expand...
Click to collapse
Los 15 is stqble enough i dont have any issues
---------- Post added at 09:05 AM ---------- Previous post was at 09:03 AM ----------
Hard_Rock83 said:
I think it won't work but u can try..and I didn't check for Oreo since we don't have any stable ROM yet..
Click to expand...
Click to collapse
Soory for naive question but how we ll know if it doesnt work?so i ll flash and check
Soory for naive question but how we ll know if it doesnt work?so i ll flash and check[/QUOTE]
Bro, it won't work on Oreo..straight and simple. Will release separate for oreo
nice! custom kernels coming in, loving it
adding this to the index asap, just need to figure out how to implement a Kernel section without blowing up the OP too much.... hmmmm....
Good work dev. Thumbs up for hard work
ThundeRStormS "Galaxy S7/S7edge (SM-G930/935 F/FD) TW Oreo, OneUI Pie and Q, Treble and AOSP kernel"
Compatibility notes :
Android TW OREO, OneUI PIE and Q, TREBLE, AOSP RELEASE odexed and deodexed roms
S7 ROMs - G930/G935 F/FD
'I don't use any ported rom so I can't check it'
(If You want to install ported roms - pls uncheck Priv fix for stock Roms in installation process and select fix for deodexed and ported roms and look at Installation section in OP)
The kernel use an AROMA installer to help guide you through the installation.
Recommended Apps:
To tweak most of the settings in the kernel, I recommend using ThunderTweaks app.
_________________________________________________
IMPORTANT INFORMATIONS:
1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
2. YOUR WARRANTY CAN BE VOID.
"I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
the finger at me for messing up your device, You can't blame me for this fact."
3. NO REQUESTS!!!
_________________________________________________
KERNEL FEATURES:
- based on stock Samsung kernel N935KKKU4CSK1
- based on latest source ||3.18.91||
- Flat and Edge support
- Odexed / Deodexed Roms
- Oreo, Pie, Treble and AOSP Roms
- Aroma installer
- init.d support
- lot of CPU governors
- Conservative governor editable (now You can edit governors values)
- lower than stock's values for big and little CPUs frequencies to 208/130 MHz
- lower than stock's values for GPU frequencies to 112MHz
- lot of I/O schedulers
- TCP : cubic, htcp, reno, bic, westwood, vegas, veno, lia, olia, wvegas
- SELinux status to permissive/enforcing
- disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
- Magisk, ThunderTweaks
- Spectrum support
- Low Memory Killer Deamon support , LMK is disabled
- ArchPower
- PWM Flicker Free
- CPU voltage control
- standard wakelocks
- Boeffla wakelock control
- Battery settings controls
- ABS clock fixed to 64bit
- GPU Thermal Throttling
- GPU voltage control
- GPU OC to 806 MHz
- F2FS, CIFS and NFS files support
- Fsync control and CRC
- Dynamic Fsync
- Gentle Sleepers support
- Wireguard VPN support
- Moro Sound Drivers
- Support for Low Memory Killer Deamon
- Disabled old Low Memory Killer
- LED controls
- Support 10 Spectrum Profiles with ThundeRStormS profiles
- ThunderStrom CPU governor based on Interactive with new editable feature
- Gestures Wakeup controls
- Support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster, Thunderbolt, Lazy, Fast, MSM - first kernel with this features
..MTweaks do not support all features of hotplugs so all settings are not available to change
..You can do it via file browser and change values in sys files of this module - some parts.
- VNSwap default is turned ON | If You want it OFF, select in Aroma Installer.
- ZRAM max file is changed to 4,0GB but default is turned OFF | disk space for ZRAM is editable.
- Input Boost drivers and control for CPU each core | first kernel with this feature for S7 TW
- Input Boost for CPU | for Little.big clusters first kernel with this feature for S7 TW
- Fingerprint Boost | first kernel with this feature for S7 TW
- this kernel is not for people who want to get big bentchmark scores, OC, etc.
- this kernel is for daily use for better battery life with good balanced work
What is not included:
- no OC for CPU
- no synapse support
_________________________________________________
INSTALLATION PROCESS:
FOR STOCK ODEX/DEODEX, Treble and AOSP ROMS
FIRST - Clear cache apps like Kernel Adiutor or MTweaks or another one in system app menager !!!
Backup EFS, DATA and KERNEL as always in TWRP !!!
Download the latest kernel version zip file
Go to recovery
Flash the CLEAN ROM, next restore Your DATA and flash the kernel zip with root or not
Choose aroma selection
Flash Magisk separately or with Aroma installer
Reboot
ThunderTweaks app is installed.
If You wnat to flash this kernel and have installed another custom kernel like MoRoKernel or Arianoxx, You have to clear ThunderTweaks, MTweaks or Kernel Adiutor cache before You install.
If You dont want one of the possibilities for root inside Aroma Installer please choose no root and next flash any root mods manually.
PROBLEMS / BUGS:
Thanks for reports.
_________________________________________________
CREDITS AND THANKS:
- The Linux Kernel Archive for the Linux Patches https://www.kernel.org/
- Samsung Open Source Release Center for the Source code http://opensource.samsung.com/
- Project: Exynos-Linux-Stable for updated ELS Linux source codes https://github.com/exynos-linux-stable
- @morogoku and @francitato02 for his help and explanation of the compile and configure kernel processing, codes and commits
- @djb77 for his help and explanation of the compile and configure kernel processing, codes and commits
- @Tkkg1994, @francitato02, @Noxxxious, @farovitus, and @mwilky for help, codes and commits
- @osm0sis for Android Image Kitchen and anykernel2 https://forum.xda-developers.com/showthread.php?t=2073775
- Magisk and SuperSu Team for root method
- @ModX81 for new base of ramdisk, CP and BL from Samsung
- Tester : @wille95, @youpeero, @TheesKyr, @cenelyanto, @Franz S., @phghost, @insanowsky, @Shariq3422, @UsmaniMustafa, @trankill, @rtakak, @shah22, HambaAllah
- Tester, idea & support : @matt_988, @Kyo-Ito
- Thanks to @noid - for fixing auto installation of ThunderTweaks and many other things
_________________________________________________
SOURCE of the kernel:
GitHub: https://github.com/ThunderStorms21th/S7-Linux-3.18.140
GitHub: https://github.com/ThunderStorms21th/S7-Linux-3.18.140-EAS
_________________________________________________
Contributors:
@nalas, @callidus_ex_de_latebros, @VHFG22, @tetsuo55
ThundeRStormS Team
_________________________________________________
DISCUSSION:
Telegram Group: Link
Telegram News Channel: Link
_________________________________________________
Version Information:
Statsus : Stable
Current version : Aio v4.5
Release Date : 2021-07-21
--------------------------------------------------------------------------------
DONATION:
If you liked my work, you can collaborate by giving thanks and with some donation to continue working hard.
Thank you very much to all.
DONATION
CHANGELOGS & DOWNLOADS in 2nd post
CHANGELOGS and DOWNLOADS
CHANGELOGS:
Version AiO v1.2
ROM OREO, PIE, TREBLE and AOSP support
Releases OREO(v2.6), PIE(v2.3), TREBLE-Q(v1.0), TREBLE-OneUI-Q (v1.0), AOSP-PIE(v1.2) and AOSP-Q(v1.0)
Samsung sources N935KKKU4CSK1
ThunderTweaks 1.0.4.0 | adaptaded to ThundeRStormS kernels |
Linux updated to 3.18.91
Compiler : aarch64-linux-android-4.9
Powersuspend updated to v1.9
Improvements in kernel source : crypto, f2fs, cfq, block, bfq, adb, mtp, mm, fs, RCU, HZ, hibernation, suspend, cpufreq and linux
Support LMK, LMK Deamon is disabled (not works properly)
F2FS Support
Possibly Fixed drain battery and some improvements
Magisk 20.1 | Magisk 20.2 phh for Q
Rest like in AiO v1.1
--------------------------------------------------------------------------------
Version AiO v1.1
ROM OREO, PIE, TREBLE and AOSP support
Busybox removed to fix Root check for secured apps
Releases OREO(v2.5), PIE(v2.2), TREBLE(v1.1) and AOSP(v1.1)
Samsung sources S5CSF1
Samsung ramdisk S5CSF1
ThunderTweaks 1.0.3.4 | adaptaded to ThundeRStormS kernels |
Linux updated to 3.18.140
Compiler : aarch64-linux-android-4.9
Iris service disabled
GPU for Pie, Treble R28 PIE drivers and for Oreo & AOSP R22 Oreo drivers
Improvements in kernel source : crypto, f2fs, cfq, block, bfq, adb, mtp, mm, fs, RCU, HZ and linux
Support LMK, LMK Deamon is disabled (not works properly)
F2FS, CIFS, NFS Support
Possibly Fixed drain battery and some improvements
Magisk 19.4 Official for all OS
Rest like in AiO v1.0
Version AiO v1.0
ROM OREO, PIE, TREBLE and AOSP support
Releases OREO(v2.4), PIE(v2.1), TREBLE(v1.0) and AOSP(v1.0)
Samsung sources S5CSF1
Samsung ramdisk S5CSF1
ThunderTweaks 1.0.3.3 | adaptaded to ThundeRStormS kernels |
Magisk 19.4/19.3 in Oreo
Linux updated to 3.18.140
Compiler : aarch64-linux-android-4.9
Iris service disabled
GPU for Pie, Treble R28 PIE drivers and for Oreo & AOSP R22 Oreo drivers
Some CPU governors are updated : new MinMax & Userspace
Support LMK Deamon, LMK is disabled
Early SF Fixed
F2FS, CIFS, NFS Support
Improvements for IRQ PM suspend mode
Possibly Fixed drain battery and some improvements
New Aroma theme and improvements
Rest like eariel releases
Version v2.0
ROM PIE NFE and N8 support
Samsung sources S5CSF1
Samsung ramdisk S5CSF1
ThunderTweaks 1.0.3.2 | adaptaded to ThundeRStormS kernels |
Flat and Edge now supported
Magisk 19.4
Linux updated to 3.18.140
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Updated 10 Spectrum Profiles
GPU R28 PIE drivers only
Some CPU governors are updated : new MinMax & Userspace
Wireguard VPN supported
Gestures Wakeup supported
Added full support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, ClusterPlug, ThunderPlug
ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned OFF.
Added Input Boost for big.LITTLE clusters for each core
Possibly Fixed drain battery and some improvements
SELinux Permissive
New Aroma theme and improvements
Version v1.9
ROM PIE NFE and N8 support
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
ThunderTweaks 1.0.3.1 | adaptaded to ThundeRStormS kernels |
Flat and Edge now supported
Magisk 19.4
REMOVED : TWRP 3.3.0-0 fixed by AJ's
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Support now 10 Spectrum Profiles with NEW ThundeRSTormS profiles
Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
Added TTL support for IP
Bluetooth OREO drivers
GPU R28 PIE drivers only
REMOVED GPU LIBS for Oreo and PIE | now rom's libs will be used.
Added new I/O scheds : Anxiety and Maple
Some CPU governors are updated
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added full support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, ClusterPlug, ThunderPlug
ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned OFF.
Added Input Boost for big.LITTLE clusters.
Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
ZSWAP RAM Pool set max from 50 to 60%
Some source fixes
Added NEBULA CPU gov
Possibly Fixed drain battery and some improvements
SELinux Permissive
Version v1.8
ROM PIE NFE and N8 support
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
ThunderTweaks 1.0.1 | adaptaded to ThundeRStormS kernels |
Flat and Edge now supported
Magisk 19.3 back again
TWRP 3.3.0-0 fixed by AJ's
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Support now 10 Spectrum Profiles with NEW ThundeRSTormS profiles
Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
Added TTL support for IP
Bluetooth OREO drivers
Added new I/O scheds : Anxiety and Maple
Some CPU governors are updated
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster
ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned OFF.
Added Input Boost for big.LITTLE clusters.
Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
ZSWAP RAM Pool set max from 50 to 60%
Possibly Fixed drain battery
SELinux Permissive
Version v1.7
ROM PIE NFE and N8 support
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
ThunderTweaks 1.0.0 | adaptaded to ThundeRStormS kernels |
Flat and Edge now supported
Magisk 19.0 back again
TWRP 3.3.0-0 fixed by AJ's
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Support now 5 Spectrum Profiles with NEW ThundeRSTormS profile
Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
Added TTL support for IP
Added new I/O scheds : Anxiety and Maple
Some CPU governors are updated
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster | MTweaks don't support some settings yet but will be in the future - thx to Moro.
ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned OFF | MTweaks don't support toggle yet.
Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
ZSWAP RAM Pool set max from 50 to 60%
Possibly Fixed drain battery
SELinux Permissive
Version v1.6
ROM PIE NFE and N8 support
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
MTweaks 2.14.0 | fixed installation
Flat and Edge now supported
Magisk 19.0 back again
TWRP 3.3.0-0 fixed by AJ's
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Added TTL support for IP
Added new I/O scheds : Anxiety and Maple
Some CPU governors are updated
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster | MTweaks don't support some settings yet but will be in the future - thx to Moro.
ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
ZSWAP RAM Pool set max from 50 to 60%
Possibly Fixed drain battery
SELinux Permissive
Version v1.5
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
MTweaks 2.14.0 | fixed installation
Flat and Edge now supported
Magisk 19.0 back again
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Added TTL support for IP
Added new I/O scheds : Anxiety and Maple
Some CPU governors are updated
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP | MTweaks don't support some settings yet but will be in the future - thx to Moro.
ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
Possibly Fixed drain battery
SELinux Permissive
Rest like in TS-PIE v1.4
Version v1.4
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
MTweaks 2.14.0 | fixed installation
Flat and Edge now supported
Magisk 19.0 back again
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP | MTweaks don't support some settings yet but will be in the future - thx to Moro.
ZRAM max files set at 2,5GB - default OFF
VNSwap truned OFF by default | If You want to turn it ON You have to delete TS script from Init.d folder
Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
Possibly Fixed drain battery
SELinux Permissive
Rest like in TS-PIE v1.3
Version v1.3
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
MTweaks 2.14.0 | fixed installation
Flat and Edge now supported
Magisk 19.0 back again
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Possibly Fixed drain battery
SELinux Permissive
Rest like in TS-PIE v1.2
Version v1.2
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
MTweaks 2.14.0 | fixed installation
Removed Smartpack-Kernel Manager v7.5
Flat and Edge now supported
Magisk 19.0 back again
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Added SSP sensor battery drain
Possibly Fixed drain battery
SELinux Permissive
Rest like in TS-PIE v1.1
Version v1.1
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
MTweaks 2.14.0
Smartpack-Kernel Manager v7.5
Flat and Edge now supported
Magisk 18.1 | System files and folders now are visible - problem of Magisk 19.0
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools fix - thx to MoroGoku
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Added SSP sensor battery drain
Possibly Fixed drain battery
SELinux Permissive
Rest like in TS-PIE v1.0.1
Version v1.0.1
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
MTweaks 2.14.0
Smartpack-Kernel Manager v7.5
Flat and Edge now supported
Magisk 18.1 | now System files are visible - problem of Magisk 19.0
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools fix - thx to MoroGoku
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
Fixed ABS clock to 64bit
Fixed some SCSI drivers
Added ArchPower support
Added Dynamic Fsync and Gentle Sleepers support
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
SELinux Permissive
Rest like in TS-PIE v1.0
Version v1.0
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
MTweaks 2.13.5
Smartpack-Kernel Manager v7.5
Flat and Edge now supported
Magisk 19.0
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Unlocked big CPU 4 cores to 2600MHz
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
GPU Freq: 112-806MHz Stock
Added GPU Throttling
Added CPU and GPU voltage control
Added GPU OC to 806MHz
Added Fsync - default turn off
Added CRC - default turn off
Added standard wakelocks
Added Boeflla wakelocks
Added Battery Store and settings control
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Wireguard VPN supported
Possibly Fixed drain battery
Some CPU governors
Lot of I/O Shedulers
HMP settings : 760/240 and some freq chcnages
USB charge to 700MHz in normall mode
USB charge to 900MHz in fast mode
Added VENO, VEGAS to TCP, etc.
Lot of CPU governors
Added PWM Flicker Free - default turn off
Moro Sound Drivers
Led controls
SELinux Permissive
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DOWNLOADS:
ThundeRStormS kernel AiO v1.2 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel AiO v1.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel AiO v1.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v2.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.9 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.8 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.7 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.6 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.5 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.4 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.3 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.2 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.0.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThunderTweaks
ThunderTweaks is an app based on Kernel Adiutor Willi Ye next modded by MoRoGoKu (MTweaks) and Corsicanu (hKTweaks).
Big thx for them.
ThunderTweaks v1.0.4.0 for TS kernel AiO v1.0 to v1.2 :
- more features in HMP section,
- added Sultan's CPU Input Boost (if kernel supports),
- added DevFreq Boost support (if kernel supports),
- support for Powersuspend v1.9,
- more features in Samsung hotplug section,
- some improvments and fixes.
ThunderTweaks v1.0.3.3 for TS kernel v1.9 & 2.0 and AiO v1.0 :
- based on ThunderTweaks v1.0.3.2
- Support Apply on Boot delay max to 150 sec
- Support load spectrum for some devices
- Support for Adaptative Fats Charge (in Battery settings)
- some improvments and fixes
ThunderTweaks v1.0.3.2 for TS kernel v1.9 & 2.0 :
- based on ThunderTweaks v1.0.3.1
- Support undervolting to -200mV for big and little CPUs
- Support step of undervolting to 6.25mV
- some improvments and fixes
ThunderTweaks v1.0.3.1 for TS kernel v1.9 :
- based on ThunderTweaks v1.0.3
- added new ThundeRStormS Spectrum Profiles and support now 10 spectrum's profiles
- updated GRADLE to 5.1.0
- added full support for newest versions of AlucardPlug, ClusterPlug, ThunderPlug, BluePlug, MakoPlug, AutoSMP, AiO
- some improvments and fixes
ThunderTweaks v1.0.1 for TS kernel v1.8 :
- based on ThunderTweaks v1.0.0
- added new ThundeRStormS Spectrum Profiles and support now 9 spectrum's profiles
- some improvments
ThunderTweaks v1.0.0 for TS kernel v1.7 :
- based on hKTweaks v1.1.5
- added full support for new AotoSMP hotplug adaptated to Exynos 8890 by ThundeRStormS team
- added fix for settings max ZRAM disk size up to 4GB
- added new ThundeRStormS Spectrum Profile and support now 5 spectrum's profiles
- first ThundeRStormS Kernel Manager
SOURCE:
https://github.com/ThunderStorms21th/ThunderTweaks
ThunderTweaks - all versions link : GoogleDrive | FOR S7 FLAT / EDGE |
DOWNLOAD:
ThunderTweaks v1.0.4.0 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.3.3 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.3.2 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.3.1 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.1 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.0 : GoogleDrive | FOR S7 FLAT / EDGE |
In test from yesterday. All good for now
matt_988 said:
In test from yesterday. All good for now
Click to expand...
Click to collapse
great to hear that
Thank you!
I can confirm, this kernel is a great compromise of battery life and performance, at 50% i've over 2 hours SOT, with normal use (S7 FLAT: spotify, email, whatsapp, excel, kiwi browser, maps, gps and bluetooth always on) i can easily arrive at full discharge with 4 hours and +. And my battery is 3 years old! Also standby consumption is fantastic, and phone is never hot!!!! I've attached a screenshot of battery life of S10E (3100 mah), a newer phone but not so good as S7 (3000 mah). Many thanks to dev.
View attachment 4742881
matt_988 said:
I can confirm, this kernel is a great compromise of battery life and performance, at 50% i've over 2 hours SOT, with normal use (S7 FLAT: spotify, email, whatsapp, excel, kiwi browser, maps, gps and bluetooth always on) i can easily arrive at full discharge with 4 hours and +. And my battery is 3 years old! Also standby consumption is fantastic, and phone is never hot!!!! I've attached a screenshot of battery life of S10E (3100 mah), a newer phone but not so good as S7 (3000 mah). Many thanks to dev.
View attachment 4742881
Click to expand...
Click to collapse
Nice to hear enjoy then and be in touch in new updates
PS
3:35h on S10 ? ulalalal bad...
Dont panic - maybe I will buy s10e so I will arrive with my kernel too
nalas said:
Nice to hear enjoy then and be in touch in new updates
PS
3:35h on S10 ? ulalalal bad...
Dont panic - maybe I will buy s10e so I will arrive with my kernel too
Click to expand...
Click to collapse
Not my, take from a web review , i will change my s7 when 5g is ready in my country, and for now s7 works well
Hi @nalas, how to remove morosound and relative drivers? I don't want any tipe of sound mod, because decreasing speaker volume. Only want the good and old flat sound.
You can turn off this in MTweaks but generaly this is default off so no changes any sound.
matt_988 said:
Hi @nalas, how to remove morosound and relative drivers? I don't want any tipe of sound mod, because decreasing speaker volume. Only want the good and old flat sound.
Click to expand...
Click to collapse
Wysłane z mojego SM-N935F przy użyciu Tapatalka
nalas said:
You can turn off this in MTweaks but generaly this is default off so no changes any sound.
Wysłane z mojego SM-N935F przy użyciu Tapatalka
Click to expand...
Click to collapse
Yes, i know this but it seems there are some things always active, like Viper4Android (i remember this, installed in my Xiaomi Mi5 where there was the same problem, play a song and sound was normal for a second but after it changed. I fix the problem uninstalling Viper4Android. In fact, in oreo, stock sound drivers only dual speaker mod, soud was flat and loud). If you could do an aroma for let decide us what mod we can install it could be fantastic.
Also, a small problem, music control in lokscreen and aod don't work with this kernel, can you fix? Thank you for your hard work.
Moro Drivers are implemented in kernel linux source so no chanse do Aroma for install, It must be make in two kernels compiled with and without Moro Drivers.
I have no time for this...
No one has that issue and me too no have problems with Viper i use this all the time.
I will stay with Moro.
So if you want so change kernel pls with no moro sound.
matt_988 said:
Yes, i know this but it seems there are some things always active, like Viper4Android (i remember this, installed in my Xiaomi Mi5 where there was the same problem, play a song and sound was normal for a second but after it changed. I fix the problem uninstalling Viper4Android. In fact, in oreo, stock sound drivers only dual speaker mod, soud was flat and loud). If you could do an aroma for let decide us what mod we can install it could be fantastic.
Also, a small problem, music control in lokscreen and aod don't work with this kernel, can you fix? Thank you for your hard work.
Click to expand...
Click to collapse
Wysłane z mojego SM-N935F przy użyciu Tapatalka
Update to TS-PIE v1.3
New release is out v1.3
Changelogs:
- Iris service disabled
- Gesture Wakeup supported
- New CPU governors added
- better battery life.
Look at OP 1 and 2nd post.
nalas said:
New release is out v1.3
Changelogs:
- Iris service disabled
- Gesture Wakeup supported
- New CPU governors added
- better battery life.
Look at OP 1 and 2nd post.
Click to expand...
Click to collapse
TEEEEEEST!
matt_988 said:
TEEEEEEST!
Click to expand...
Click to collapse
me too, I'm testing it.
Is this kernel the best out right now? coming from ariano (best one so far).. moro has horrible battery life.. how is this kernel?
Renell said:
Is this kernel the best out right now? coming from ariano (best one so far).. moro has horrible battery life.. how is this kernel?
Click to expand...
Click to collapse
My personal opinion, yes.
hi,
thank for great kernel, have just one question, in aroma what is "patch for deodexed and ported roms" and should I checked ? have use blackdiamond rom.
oufouf84 said:
hi,
thank for great kernel, have just one question, in aroma what is "patch for deodexed and ported roms" and should I checked ? have use blackdiamond rom.
Click to expand...
Click to collapse
You've odexed but ported rom. So you should select that.
DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I have the full right from the owner of Cronos, to modify, customize and distribute the current kernel under different name.
Modifying and re-uploading this kernel distribution is not allowed.
INFO:
KRAKEN is a friendly oriented project for powerful users and gamers.
KRAKEN supports Project Spaget and OneUI ROMs.
Android Version Support:
Android Pie
Android Q
COMPATIBLE VENDORS [ARM64] :
ARM64 for A3x 2017 by @Astrako
ARM64 for A6x 2018 by @ShaDisNX255
ARM64 for J6x 2018 by @ShaDisNX255
ARM64 for J5x 2017 by @ananjaser1211
ARM64 for J7x 2017 by @ananjaser1211
SUPPORTED DEVICES:
A320x
A600x
J530x
J600x
G610x
J701x
J710x
J730x
FEATURES:
KERNEL:
Based on J530FXWU5CSH7 source
Upstreamed to Linux 3.18.140
Compiled with Linaro's GCC 7.5 Toolchain (2019.12)
Compiled with -pipe, -funroll-loops (GPU), -ffast-math (GPU), -O3, ARM related hardware GCC optimizations and graphite optimizations
Permessive SELinux
Fake KNOX Warranty Status (0x0)
Optimized for Performance
Fast boot (Increased cluster booting frequency)
Heterogeneous Multi-core Processing (PORT from Exynos 7904)
Mali: r29p0 driver (A600FNXXU5CTB9)
Custom Voltage Control (CPU/GPU/MIF/CAM and more)
Dynamic FSync (FSync ON/OFF)
Samsung's LPM (Treble)
ARM32/64 Ready (Treble and OneUI)
HOTPLUG:
Samsung's Hotplug (disabled)
CLOCKS:
OSCCLK frequency up to 27 MHz (FSB)
CL0 frequency up to 1.75 GHz (Small Cluster)
CL0 frequency down to 343 MHz (Small Cluster)
CL1 frequency up to 1.86 GHz (Big Cluster)
CL1 frequency down to 343 MHz (Big Cluster)
G3D frequency up to 1040 MHz (GPU)
G3D frequency down to 343 MHz (GPU)
BUS frequency up to 1937 MHz in dual-channel (RAM)
BUS frequency up to 968 MHz in single-channel (RAM)
MIF switching frequency up to 902 MHz (DEVFREQ)
CAM rebooting frequency up to 533 MHz (DEVFREQ)
TMU (Exynos Thermal Management Unit):
Increased thermal limits for CL0 (Small Cluster)
Increased thermal limits for CL1 (Big Cluster)
Increased thermal limits for G3D (GPU)
DVFS (Dynamic voltage and frequency scaling):
CPU: disabled
GPU: disabled
TCPs:
westwood (default)
bic
cubic
htcp
reno
I/O's:
bfq (default)
noop
deadline
row
cfq
maple
fifo
fiops
sio
sioplus
tripndroid
vr
zen
GOVERNORS:
interactive
interactives9 (default)
blu_active
cafactive
impulse
ondemandplus
bioshock
dancedance
electrodemand
hyper
intellidemand
smartass2
pegasusq
ondemandx
wheatley
thunderstorm
VARIOUS:
Boeffla Wakelock blocker
Powersuspend
WireGuard
Power Efficient workqueues
Ultra Kernel Samepage Merging
Butterizer
ROOT:
KRAKEN doesn't come with Magisk support, but you can manually download and install it from here: Magisk v20.3
SUPPORT:
In thread.
Telegram Group.
CREDITS:
Me, for developing without a device and for the struggle to test new things.
@ananjaser1211 for making this whole thing possible with his amazing work on HeliosPie.
@corsicanu for his great contribution to HeliosPie.
@Astrako for being the first one to test KRAKEN on his A3.
@LelMwhLwl for testing every single kernel image provided by me on his J5.
@kique119 for testing almost every single kernel image on his J7, for including me in his documentation and for the huge boost on what I am doing.
@Me2 for testing many of the provided images.
Thanks to anyone else who made this whole thing possible but it's not included, you are part of it as well!
XDA:DevDB Information
KRAKEN-Kernel for Galaxy Exynos 7870 devices, Kernel for the Samsung Galaxy A3/J5/J7/A6/J7 2017/2018
Contributors
SPARTANICUS, ananjaser1211
Source Code: KRAKEN
ROM OS Version: 9.x +
ROM Kernel: Linux 3.18.140
ROM Firmware Required: Pie Bootloader
Version Information
Status: Stable
Current Stable Version: RC15
Created 2019-08-13
Last Updated 2020-03-27
DOWNLOADS:
Stable Releases
INSTALLATION:
Download the provided KRAKEN-Kernel-VERSION-universal7870-OS-DATE.zip file, place the file in your internal storage or sdcard.
Boot into your recovery, find the "KRAKEN-Kernel...".zip package and flash it.
The package will detect your device and it will flash the right kernel for your device. After the flash was successful you can reboot your device.
Keep up the good work :good:
gg :highfive:
good work! thanks
Project spaget is buggy on j7 prime as per user reviews.
Is that thing fixed (random reboots and stuff).??
If it is fixed then we can move to aosp roms and install kranken kernel.
Btw it's awesome work
MarkTejo said:
Project spaget is buggy on j7 prime as per user reviews.
Is that thing fixed (random reboots and stuff).??
If it is fixed then we can move to aosp roms and install kranken kernel.
Btw it's awesome work
Click to expand...
Click to collapse
It's a vendor related issue..
---------- Post added at 10:46 AM ---------- Previous post was at 10:46 AM ----------
Thanks sar much lob ♡
hang up on my G610Y variant.
bjpp21 said:
hang up on my G610Y variant.
Click to expand...
Click to collapse
you need Spaget installed
can you make this kernel compatible in a750 unit?
Arm32 ?
Thread is updated, there's also a new KRAKEN version! Enjoy it and report problems as usual.
good work, the best kernel
Secure Folder Support?
Sent from my SM-G610F using XDA Labs
Dude
What's is the best? J-type, G-type, E type or D-type? I'm confused, my device is G610M
Prapren said:
What's is the best? J-type, G-type, E type or D-type? I'm confused, my device is G610M
Click to expand...
Click to collapse
J type
Thread updated for upcoming RC15!
Greatest Kernel for Galaxy J7 Prime and other related phones. :good::good::good:
Just download RC14. But will wait for RC15 to update.
I flashed Kraken RC14 for Treble. But when I flashed the Kraken script said error mounting /system partition. Will this issue cause what troubles?
Thanks for the kernel (working anyway)