Database Develop

I have proplem with my divce

So I need help from everybady please becouse i try to solve it but its stile

aburenad said:
So I need help from everybady please becouse i try to solve it but its stile
Click to expand...
Click to collapse
i had this yesterday after unlocking bootloader. for me pressing the power button for about 30 seconds fixed the problem.

Did you try to enter in recovery?
However, longpress power button

b3ndech0 said:
i had this yesterday after unlocking bootloader. for me pressing the power button for about 30 seconds fixed the problem.
Click to expand...
Click to collapse
I Try but its stil

You can try to longpress vol+ for enter in stock recovery if you will enter in recovery.
but i think you've resolved.

Guich said:
You can try to longpress vol+ for enter in stock recovery if you will enter in recovery.
but i think you've resolved.
Click to expand...
Click to collapse
I tried but still the problem

aburenad said:
So I need help from everybady please becouse i try to solve it but its stile
Click to expand...
Click to collapse
Did you install custom recovery to phone?

dadrocker said:
Did you install custom recovery to phone?
Click to expand...
Click to collapse
Yes, several times

If you are trying to install a custom rom try All in one toolkit... If you want to return to stock try http://forum.xda-developers.com/showthread.php?t=2224752&highlight=stock+rom
http://forum.xda-developers.com/showthread.php?t=2183942&highlight=all+in+one+toolkit

dadrocker said:
If you are trying to install a custom rom try All in one toolkit... If you want to return to stock try http://forum.xda-developers.com/showthread.php?t=2224752&highlight=stock+rom
http://forum.xda-developers.com/showthread.php?t=2183942&highlight=all+in+one+toolkit
Click to expand...
Click to collapse
Yes, I try to go back to the original, but I can not my device information in attach

Download Stock Rom exe from this thread. And run the application. That will guide you to install the stock rom.I thin this will solve your problem. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
http://forum.xda-developers.com/showthread.php?p=39588860

Hi. I dont mean to hijack the thread but I thought it would be better than starting a new thread with the same problem. I just got my One today and started going through the process of installing a custom rom. I unlocked the bootloader, installed a custom recovery and root and everything went fine. When I went to install Revolution 9.2 I went through the aroma installer and everything said it went OK but I'm now in a boot loop.
I installed the toolkit and using that I was able to flash different recoveries, including the stock recovery, but while I can see a different recovery screen flash, it then still boot loops. I can get into Fastboot, but not recovery. I'm downloading a stock rom exe as suggested, but didnt know which one to select. Im downloading an Asia one since im in NZ and thats the closest. is it possible to flash back to stock by fastboot? Im wondering if my partition got porked during the rom flash.
Any ideas?

kane274 said:
Hi. I dont mean to hijack the thread but I thought it would be better than starting a new thread with the same problem. I just got my One today and started going through the process of installing a custom rom. I unlocked the bootloader, installed a custom recovery and root and everything went fine. When I went to install Revolution 9.2 I went through the aroma installer and everything said it went OK but I'm now in a boot loop.
I installed the toolkit and using that I was able to flash different recoveries, including the stock recovery, but while I can see a different recovery screen flash, it then still boot loops. I can get into Fastboot, but not recovery. I'm downloading a stock rom exe as suggested, but didnt know which one to select. Im downloading an Asia one since im in NZ and thats the closest. is it possible to flash back to stock by fastboot? Im wondering if my partition got porked during the rom flash.
Any ideas?
Click to expand...
Click to collapse
If you can get into fastboot you can return to the stock rom. or you can install ARHD 9.2 again.
---------- Post added at 12:19 PM ---------- Previous post was at 12:16 PM ----------
By the way don't forget the erase the cache. Fastboot erase cache

dadrocker said:
If you can get into fastboot you can return to the stock rom. or you can install ARHD 9.2 again.
---------- Post added at 12:19 PM ---------- Previous post was at 12:16 PM ----------
By the way don't forget the erase the cache. Fastboot erase cache
Click to expand...
Click to collapse
OK, I'm sorry to ask silly questions. if I have the ARHD 9.2 Zip, what commands in Fastboot to install the Zip?
And thanks for the erase cache option

kane274 said:
OK, I'm sorry to ask silly questions. if I have the ARHD 9.2 Zip, what commands in Fastboot to install the Zip?
And thanks for the erase cache option
Click to expand...
Click to collapse
If you installed All In One Toolkit You can install that rom by using SIDELOAD installation.

dadrocker said:
If you installed All In One Toolkit You can install that rom by using SIDELOAD installation.
Click to expand...
Click to collapse
Thanks, will give that a try

But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.

dadrocker said:
But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.
Click to expand...
Click to collapse
Thanks man. I just tried side loading and realised I needed to get into recovery to do that. Fingers crossed
---------- Post added at 09:47 PM ---------- Previous post was at 09:43 PM ----------
dadrocker said:
But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.
Click to expand...
Click to collapse
Yay, thanks very much. Just managed to boot into TWRP :good:

Thanks for everybady i solve it

aburenad said:
Thanks for everybady i solve it
Click to expand...
Click to collapse
I'm glad
Thanks for sharing your thread, I managed to solve mine too with the help here.

Downgrade OOS 4 to 3.5.4.

Hi everybody,
I have a probleme with my OP3T.
I have upgraded the OS from 3.5.4 to 4, but I don't succed to root the phone, mainly because of the TWRP (flash with 3.0.3.0) that doesn't access to the SD card (twrp asks a password I don't have, so that stay encrypted).
When I try to follow this guide, I always have an error with the recovery stock (recovery downloaded from the oneplus support) during the sideload step (I also try to dowload the rom with twrp, but no success...)
So my question:
Does someone can help me to come back to 3.5.4 until twrp is supported by 4.0 ?
Thank you very much

I'm in the same boat. When sideloading 3.5.3 ota it fails after approximately 45%.

I had the same problem. Steps I did in order to make phone functional:
If you don't have TWRP, you have to install it.
Then, you should wipe your phone entirely from TWRP (Factory Reset, Format Data, Advanced Wipe->Dalvik/ART;System;Data;Internal Storage).
Reset the phone and enter TWRP once again.
Copy the official ZIP with OOS 3.5.x ROM into phone's memory, then flash it.
Flash SuperSU, otherwise your phone won't boot.
I don't take any responsibility, in case you mess something up with your phone.

Okay, my solution was to: 1. boot up in fastboot mode 2. Disable encryption by opening a command prompt in administrater mode and type fastboot format userdata. 3. Install 3.5.3 from Twrp.
Not ideal to disable encryption but now I got a working phone
---------- Post added at 04:59 PM ---------- Previous post was at 04:54 PM ----------
djseban2 said:
I had the same problem. Steps I did in order to make phone functional:
If you don't have TWRP, you have to install it.
Then, you should wipe your phone entirely from TWRP (Factory Reset, Format Data, Advanced Wipe->Dalvik/ART;System;Data;Internal Storage).
Reset the phone and enter TWRP once again.
Copy the official ZIP with OOS 3.5.x ROM into phone's memory, then flash it.
Flash SuperSU, otherwise your phone won't boot.
I don't take any responsibility, in case you mess something up with your phone.
Click to expand...
Click to collapse
Thx. I might have forgotten to reset the phone after wipe, before installing 3.5.4 which is why it wouldn't install even from twrp. My solution worked though - encrypting it again will be for another day. Sick of geeking

So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks

white43 said:
So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks
Click to expand...
Click to collapse
Yes, it's entirely possible, but what's the point? You can flash stock recovery->lock bootloader->sideload OOS 4.0, and you are stock . From what I've read, not everyone got 4.0 through OTA yet.

Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient

white43 said:
So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks
Click to expand...
Click to collapse
Do you have a link for the stock 3.5.X recovery? Link from O+ download section won't work..

They provide the so-called Oxygen Stock REC for OP3T here: downloads.oneplus.net/
But I always got different MD5 after downloading the img they provided.

spida_singh said:
Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient
Click to expand...
Click to collapse
Hey I am in same boat, does TWRP version matters to return from 4.0.2 to 3.5.3.
I have TWRP(3031) and SU 2.79. I want to revert for battery as well xposed.

uttam.ace said:
Hey I am in same boat, does TWRP version matters to return from 4.0.2 to 3.5.3.
I have TWRP(3031) and SU 2.79. I want to revert for battery as well xposed.
Click to expand...
Click to collapse
It will work with 3.0.3-1 TWRP but you have to flash the ROM twice because of filesystem and put the files twice on the internal memory. Reboot recovery twice forced.
I think TWRP 3.0.4.0 should work better but I do not used it on my phone to restore from 4.0.2 to 3.5.4 so you could try and let us know
---------- Post added at 06:35 PM ---------- Previous post was at 06:32 PM ----------
https://forums.oneplus.net/threads/how-to-restore-to-3-5-4-from-4-0-2-on-op3t.493963/
I made this but you can flash it at your own risk.
To me it worked.
And another tutorial I found but not tried is here https://forum.xda-developers.com/showpost.php?p=70310185&postcount=308

Oneplus 3T downgrade bootloader locked
Hello everyone!
I have a OP3T locked by frp and android nougat oxygen 4.0.3. Is there any solution to downgrade the android to oxygen 3.x??
Thank you guys,
Cheers!

spida_singh said:
Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient
Click to expand...
Click to collapse
I tried using TWRP 3.0.4.1,
I was able to flash. thing is, while flashing zip in twrp, it won't show any progress for 2-10 minutes.
then it will show finished flashing
---------- Post added at 07:12 PM ---------- Previous post was at 07:07 PM ----------
I want to share my experience,
Latest TWRP 3.0.4.1 made all difficulty easy,
I was in oxyzen os 4.1.6.
then tried sideload, it fails,
then installed TWRp and flash 3.5.4 via TWRP, (have to flash data,system,cache,internal storage) before flashing,
then it just booted, no issue

Bricked Phone, Please Help!!

I am using the Indian model. I wanted to go back to 103.5 from 11.0.1 so I flashed the 10.3.5 zip but then I got stuck in a recovery loop and all the folders were encrypted. TWRP didn't ask for the pattern. I then flashed fastboot rom with the save user data option but the phone now is stuck rebooting to stock recovery.
Please tell me what to do, I don't want to lose my data. If I can somehow decrypt I can use my twrp backup to restore but if I wipe everything then I will lose that too. What to do

I don't think you have a chance of getting the backup back. But wait for others to tell you of there is a way
Sent from my Redmi K20 Pro using Tapatalk

ishaqtkr said:
I don't think you have a chance of getting the backup back. But wait for others to tell you of there is a way
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
how do I know if the fastboot rom I downloaded is ok, it paused a couple of times during downloading, does it give an error if its not ok. Is it certain that the phone will work if I select clean all? I don't want to do it if there is any other option

gwenmillett said:
how do I know if the fastboot rom I downloaded is ok, it paused a couple of times during downloading, does it give an error if its not ok. Is it certain that the phone will work if I select clean all? I don't want to do it if there is any other option
Click to expand...
Click to collapse
Yes it should bring error if the file is corrupted. Regarding if it will work with fastboot clean all, YES it will, if that's the only solution then get the fastboot ROM and flash it with mitool, as you may know, don't select CLEAN ALL AND LOCK, only CLEAN ALL
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 05:42 PM ---------- Previous post was at 05:42 PM ----------
From where did you get the fastboot ROM?
Sent from my Redmi K20 Pro using Tapatalk

ishaqtkr said:
Yes it should bring error if the file is corrupted. Regarding if it will work with fastboot clean all, YES it will, if that's the only solution then get the fastboot ROM and flash it with mitool, as you may know, don't select CLEAN ALL AND LOCK, only CLEAN ALL
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 05:42 PM ---------- Previous post was at 05:42 PM ----------
From where did you get the fastboot ROM?
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
I used http://bigota.d.miui.com/V10.3.3.0....FKINXM_20190711.0000.00_9.0_in_a1c0a15dec.tgz
Do they do anything different at the service center, will they be able to save my data?

Your data is gone. Even Service Center can't help you.

Use miflash tool to flash official recovery rom.

gwenmillett said:
I am using the Indian model. I wanted to go back to 103.5 from 11.0.1 so I flashed the 10.3.5 zip but then I got stuck in a recovery loop and all the folders were encrypted. TWRP didn't ask for the pattern. I then flashed fastboot rom with the save user data option but the phone now is stuck rebooting to stock recovery.
Please tell me what to do, I don't want to lose my data. If I can somehow decrypt I can use my twrp backup to restore but if I wipe everything then I will lose that too. What to do
Click to expand...
Click to collapse
If you have the same 11.0.1 recovery rom somewhere, then try to remove the compatibility.zip from it and flash it from flash drive after mounting it in TWRP. I think that way, you'll get back to Miui where you can take your data back up.

rajumack07 said:
If you have the same 11.0.1 recovery rom somewhere, then try to remove the compatibility.zip from it and flash it from flash drive after mounting it in TWRP. I think that way, you'll get back to Miui where you can take your data back up.
Click to expand...
Click to collapse
you're a life saver! this worked. but the data is still encrypted, all the files are gibberish

gwenmillett said:
you're a life saver! this worked. but the data is still encrypted, all the files are gibberish
Click to expand...
Click to collapse
Try adding a security pin in miui and then go to twrp, it should ask for the same pin and then after you get in, you should see your files (just guessing) . But to keep your data encrypted, AFAIK, only way to flash another rom is through flash drive.

rajumack07 said:
Try adding a security pin in miui and then go to twrp, it should ask for the same pin and then after you get in, you should see your files (just guessing) . But to keep your data encrypted, AFAIK, only way to flash another rom is through flash drive.
Click to expand...
Click to collapse
Tried that, didn't work. Had to factory data reset in the end

gwenmillett said:
Tried that, didn't work. Had to factory data reset in the end
Click to expand...
Click to collapse
Share all the steps you're doing considering you are in miui and wanted to flash.

rajumack07 said:
Share all the steps you're doing considering you are in miui and wanted to flash.
Click to expand...
Click to collapse
I flashed 10.3.5 over 11. 0.1 but didn't wipe data. That made it bootloop to recovery

gwenmillett said:
I flashed 10.3.5 over 11. 0.1 but didn't wipe data. That made it bootloop to recovery
Click to expand...
Click to collapse
When you want to revert back to an earlier major version of MIUI, it is recommended to flash a fastboot ROM using the Mi Flash Tool and using the 'clean all' flash option.

Please help me unbrick this device

I am not able to boot into twrp recovery so I'd appreciate all the help.
I have unlocked bootloader.
Downloaded the twrp from here recovery
flashed twrp
flashed misc
then rebooted into recovery
formatted data
rebooted recovery
then I formatted internal storage and system partition also (I think this where I screwed up)
then again I rebooted the recovery and instead the device goes to fastboot. No matter what I try, it just wont go into recovery.
I flashed twrp again and flashed mics countless times but the device keeps going into fastboot and not into the recovery.
Can anyone help please? Thanks.

Jeanz Sensation said:
I am not able to boot into twrp recovery so I'd appreciate all the help.
I have unlocked bootloader.
Downloaded the twrp from here recovery
flashed twrp
flashed misc
then rebooted into recovery
formatted data
rebooted recovery
then I formatted internal storage and system partition also (I think this where I screwed up)
then again I rebooted the recovery and instead the device goes to fastboot. No matter what I try, it just wont go into recovery.
I flashed twrp again and flashed mics countless times but the device keeps going into fastboot and not into the recovery.
Can anyone help please? Thanks.
Click to expand...
Click to collapse
Just download fastboot rom from this link
https://mifirm.net/download/3560
Flash with MI FLASH TOOL in fastboot mode

Don't worry. I had this issue twice . You need to flash fastboot rom without locking the bootloader again(choose it from the bottom of miflash tool). then go to fastboot mode and reinstall twrp again and install any rom you need or even downgrade to earlier version.

if you flash miui_PYXISGlobal_V11.3.4.0.PFCMIXM_78bb922dcd_9.0.zip on fastboot, you'll start from scratch, it'll boot but with stock recovery, so that could be your plan B

You guys are awesome. My phone is back into action. Thank you very much.
I followed this guide and it all went smooth.

hi guys
helllp me plz
im in a very big trouble
my device is breacked
i have a mi cc9
the bootloader was unlocked
i wanted to upgrade it from miui 10 to miui 11
i used mi flashtools
but i forgoted to select clean all and instead i flash the device with eu rom and locked the bootloader
now when the device is boot it sais this version of miui cant be installed on this device
i dont know what to do
please help me

wahab.safi3 said:
hi guys
helllp me plz
im in a very big trouble
my device is breacked
i have a mi cc9
the bootloader was unlocked
i wanted to upgrade it from miui 10 to miui 11
i used mi flashtools
but i forgoted to select clean all and instead i flash the device with eu rom and locked the bootloader
now when the device is boot it sais this version of miui cant be installed on this device
i dont know what to do
please help me
Click to expand...
Click to collapse
Flash stock fastboot MIUI ROM with miflash.

i cant because the bootloader is locked

wahab.safi3 said:
i cant because the bootloader is locked
Click to expand...
Click to collapse
Pretty sure you dont need unlocked bootloader to flash stock ROM....

k3lcior said:
Pretty sure you dont need unlocked bootloader to flash stock ROM....
Click to expand...
Click to collapse
i have mi cc9 so mean that if i use mi flashtools and flash china version of miui it doesnt need an unlock bootloader?
because i wanted to flash an eu miui again but mi flashtools wasnt able to flash and printed cant ... state:locked

k3lcior said:
Pretty sure you dont need unlocked bootloader to flash stock ROM....
Click to expand...
Click to collapse
:crying: m :crying:

wahab.safi3 said:
:crying: m :crying:
Click to expand...
Click to collapse
Sorry pre img was wrong
---------- Post added at 10:11 PM ---------- Previous post was at 10:00 PM ----------
wahab.safi3 said:
Sorry pre img was wrong
Click to expand...
Click to collapse
I tried several times but it didn't worked
Just saying:
Failedremote: erase is not allowed in lock state)

Flashing Magisk v20 bootloops to recovery

Hello,
I attempted to root my Mi CC9 / 9 Lite and currently have a bootloop.
What I did:
-Flash TWRP from fastboot (success)
-Boot into TWRP (success)
-Wipe / Factory reset (success)
-Flashing Magisk v20 zip file (success)
-Then, reboot system sends me to TWRP again.
What I tried:
-The phone is not bricked. When I factory reset again from TWRP and boot to system, it boots up.
-Signing the boot image after flashing magisk using the zip file here (This did not work. Flashing the zip file returned a verification error)
Not quite sure how to root my phone at this point. Any help would be much appreciated. Thank you.

You need the Enable encryption zip...it will boot it up.. boot loop is cause from MIUI trying to encrypted and failing.
Flash the zip in this thread... go to the fstab zip that will help you
https://forum.xda-developers.com/mi-cc9/development/recovery-twrp-pyxis-unofficial-t3990493

[email protected] said:
You need the Enable encryption zip...it will boot it up.. boot loop is cause from MIUI trying to encrypted and failing.
Flash the zip in this thread... go to the fstab zip that will help you
https://forum.xda-developers.com/mi-cc9/development/recovery-twrp-pyxis-unofficial-t3990493
Click to expand...
Click to collapse
Where do I find it?

dupreme said:
Where do I find it?
Click to expand...
Click to collapse
Direct link from OP.
https://www.mediafire.com/folder/zqk7a9qj5ltyd/Mi 9 Lite (pyxis)

[email protected] said:
Direct link from OP.
https://www.mediafire.com/folder/zqk7a9qj5ltyd/Mi 9 Lite (pyxis)
Click to expand...
Click to collapse
Thank you. I tried flashing the fstab zip after flashing magisk and it did not change the situation. Shall I first flash the auto-decrypt TWRP img and then try again?

dupreme said:
Thank you. I tried flashing the fstab zip after flashing magisk and it did not change the situation. Shall I first flash the auto-decrypt TWRP img and then try again?
Click to expand...
Click to collapse
What I do is this: I Boot in recovery and format data then I go to advance wipe and select data and then repair and select ext4 and swipe and then reboot recovery and flash the MIUI rom and then I reboot the recovery and mount system and vendor and flash the zip and then reboot and wait for it... you know it will boot up because after it boots up the bootanimation increases it's light before the actual booting in the system and the rest you can figure out... hope this helps you out.

[email protected] said:
What I do is this: I Boot in recovery and format data then I go to advance wipe and select data and then repair and select ext4 and swipe and then reboot recovery and flash the MIUI rom and then I reboot the recovery and mount system and vendor and flash the zip and then reboot and wait for it... you know it will boot up because after it boots up the bootanimation increases it's light before the actual booting in the system and the rest you can figure out... hope this helps you out.
Click to expand...
Click to collapse
I'll try that. Thanks a lot. Do you use the auto-decrypt (the one you linked) TWRP in this, or just regular TWRP. I am using just the pyxis TWRP.

Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you

dupreme said:
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
Click to expand...
Click to collapse
After you unlock the bootloader I just put it in fastboot mode and fastboot boot "(whatever you have it called... I renamed it recovery) recovery.img and then press the volume up button and then I install the image through TWRP and reboot recovery and then follow the steps.
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
dupreme said:
I'll try that. Thanks a lot. Do you use the auto-decrypt (the one you linked) TWRP in this, or just regular TWRP. I am using just the pyxis TWRP.
Click to expand...
Click to collapse
I used the TWRP for the team win recovery project website.
---------- Post added at 04:25 PM ---------- Previous post was at 04:07 PM ----------
dupreme said:
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
Click to expand...
Click to collapse
Fstab zip is last because it's the encryption fix

[email protected] said:
After you unlock the bootloader I just put it in fastboot mode and fastboot boot "(whatever you have it called... I renamed it recovery) recovery.img and then press the volume up button and then I install the image through TWRP and reboot recovery and then follow the steps.
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
I used the TWRP for the team win recovery project website.
---------- Post added at 04:25 PM ---------- Previous post was at 04:07 PM ----------
Fstab zip is last because it's the encryption fix
Click to expand...
Click to collapse
I tried a combination of what you suggested and this guide and the phone booted up with root. However, opening the Magisk manager immediately says "your device needs additional setup" or something similar, and asks to flash a zip file. When I select flash, it says rebooting in 5 sec and stays in bootloop. Have you come across this?

use twrp by brigudav. It has also s built-in Magisk installer.

JimmyBondi said:
use twrp by brigudav. It has also s built-in Magisk installer.
Click to expand...
Click to collapse
Can you share a link? I could not find an XDA thread. Thank you.

dupreme said:
I tried a combination of what you suggested and this guide and the phone booted up with root. However, opening the Magisk manager immediately says "your device needs additional setup" or something similar, and asks to flash a zip file. When I select flash, it says rebooting in 5 sec and stays in bootloop. Have you come across this?
Click to expand...
Click to collapse
TBH no because as Soon as I got TWRP I flash another rom Mi Globe rom to be exact and use the method I posted.