Database Develop

[Q] Whats your ideal case for the NC?

What is the ideal case for your Nook Color?
Is it one that is available or not?
What are some of the features you would like it to have?
Do you want a fold case that covers the screen?
Is the micro usb port in a convenient location?
Looking for some ideas. Working on a shell now for a mold. Not sure if anything will come of it but want to see what you all are looking for in a case. Feel free to post your thoughts. Thanks.

I would like to see a one sided hard cover that can protect the screen when not in use and snap onto the rear when in use. Probably use the typical four corner frame system you see in many cases so nothing is obstructed.
Also, have a stand "system" so that when it is snapped to the rear you can prop up the NC. Maybe something like what you see on back side of keyboards. And like some keyboards I've seen, have different levels of lift. One lift level that slightly raises the NC off the surface, for typing and such. Another lift level that is like the leg stand you see on the EVO 4G or Archos 70, for video/picture viewing and the like.
Heh. First post around here. Been meaning to chime in on a thread and this is the perfect one to start. Only because I've been looking for something I described but there is nothing out there yet.

I'm looking for an inexpensive silicone gel skin, something I'd keep on pretty much all the time. I'm also keeping my eyes open for sturdy travel case.
There seem to be choices out there for both, I'm just waiting a bit for more of them to hit ebay.

I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.

drp1 said:
I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.
Click to expand...
Click to collapse
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.

techboydino said:
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.
Click to expand...
Click to collapse
Are you designing desktop/multimedia cases as well? I would love additional speakers on the NC and also a magnetic swivel X mount stand for desktop use.

My ideal case is not available yet. It is an envelope-like case that will allow me to pull the Nook out and use it naked. Something in nice black leather.

Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.

A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev

bugeyed1 said:
A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev
Click to expand...
Click to collapse
Good Idea, I may try that out.
Im not any sort of professional or anything, but I do have access to some pretty sweet resin's and molding equipment. Carbon fiber is the idea, but the glass mold and how I want to do the front part comes first. Ill keep the thread updated.

ideal nook case
looking for something very close to this case
http://www.amazon.com/gp/product/B0040VNRTG/ref=oss_product
just substituting the swivel belt clip for a kickstand
i like the idea of moving the usb jack to another spot but i think that would add alot of cost and effort to the case build

Rube Goldberg lives; or, is this even possible?
You asked for the ideal, here is mine. Not at all sure it is doable....
1. In the interest of keeping the total package as slim as possible, no back, unless it is necessary to support other features.
2. [Front] cover has a slot for a pad of paper and/or corner slots for index cards.
3. [Front] cover is hinged on the right (I'm right handed and I want to be able to write easily).
4. [Front] cover has a foldover flap to keep the paper or cards from contacting the screen when the cover is closed.
5. The cover can fold 180 degrees so that the cover lies flat against the back of the tablet.
6. The cover can support the Nook as an easel in landscape mode.
7. The cover can support the Nook as an easel in portrait mode - this might involve some sort of short extension legs or other support to raise the lower edge of the Nook an inch or so (and this might help with the need to plug in the USB connector at the bottom).
8. Bonus points for the ability to fold out a handle attached at the lower left corner when in portrait mode, sort of like a hand mirror.
9. And of course it should be strong, light, durable, elegant, and less than $40 US.
I'm ready to order as soon as I see the pictures of the finished product.

Thanks for the ideas everyone. Haven't worked on it in a few due to being out at CES. Unfortunately there were NO cases out there. Working with Speck to find something but tried everything else and could not even find a nice slip cover. Otterbox said they are testing designs so no real info there either.

My ideal case is something like
http://shop.brando.com/samsung-galaxy-tab-case-with-bluetooth-keyboard_p05269c0299d057.html
this.
Bluetooth keyboard case, waiting for bluetooth to work for NOOK!! and I could use it as a netbook and a tablet. IDEAL.

This is my cheap (free) case for my nook color. It’s the zippered case for my trucks instruction manual. The patch covers the ford symbol; if I need to hide it in plain sight I can pull the patch off and leave it in the back seat. It fits perfectly and there is a plastic divider on the inside I can put business cards and a small pad of paper (as others have asked). All I keep in it is a set of skullcandy headphones in an microfiber Oakley sunglass bag for cleaning the screen.
michael
-"I learned a very valuable lesson on my travels, Tucker. No matter how bad things might seem..."
-"They could be worse?"
-"Nope, no matter how bad they seem, they can't be any better, and they can't be any worse, because that's the way things fraking are, and you better get used to it Nancy. Quit yer *****ing."

Perfect case for the Nook Color
Before I bought my Nook, I had a Pandigital Novel that I bought on eBay.
In the same eBay search results page the Novel appeared on was a great case called BookArmor. Although it was $35, I bought it. And I haven't regretted it either.
The BookArmor case comes with a set of velcro-like pads that stick on the back of the tablet and allow it to be fixed to the case. The case itself is laminated steel and plastic covered with textured fabric. It zippers shut and the zipper sides are soft and stay out of the way when the case is opened. You have total access to all side buttons and ports. The inside surface that comes in contact with the screen is covered with a soft foam pad.
When I decided to get the Nook, I found out that the case I had for the Novel is the exact same case for the Nook Color. I really like this case and haven't even considered another one.
For more info go to extremeinkjet.com and click on BookArmor cases in the blue left-hand column. Pick any Delta 6 case ... there is a Nook Color one. Checkout their video at the bottom of the page.
It looks like this case is really popular too ... there aren't any left on eBay and the extremeinkjet site shows all out of stock for the Delta 6 case. Amazon shows one Delta 6 left for the Pandigital (same case) but it doesn't even show up for Nook Color.

I don't know if I'd call it perfect. But, I bought the B&N case with the vertical flap and ribbon with magnet on the end to hold it closed/open. It works well for me.
If they were available in store when I bought my nook, I would have also considered the silicone one. Although, if I went that route, I'd probably prefer the otter box version with the hard resin exterior an rubber liner. I would also have considered the black leather pouch one where you completely remove the nook to use it.
Alas, none of these were available to me when I made my purchase so I'm using what I have.
With either the otter box or the silicone I would gain a thinner form factor. But, I would never be able to completely cover the screen. With the pouch one, I would gain the thin form factor when using and would not add much when transporting. But, it's basically just a branded leather sleeve.
In the end, what drew me to the case that I bought was the vertical flap and ribboned magnet. 1 - with the horizontal flapped ones, the magnet does not flip around to hold the flap to the back of the case so it's open like a book with the flap dangling out the right side. 2 - with the vertical one that I got, you flip the cover over the top, move the magnet to the back to hold the cover in place and you have all your nooky goodness to go to town with!
Just my 2 cents.

jlh8733 said:
Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.
Click to expand...
Click to collapse
Wow...love love love this idea.
This would be great..a hard protective slide case.
This would definitely be a $$$ maker.

I bought a "Industriell Cover in Storm" cover and it works perfectly, very simple, protects the screen, and it's small.

I'm stealing your "DON'T PANIC" sticker on the back idea. thanks for reminding me.

Received my Moko 360 Case (Pics Included)

Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.

Nice review! The case looks better than I had imagined.

I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.

Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.

regalpimpin said:
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Click to expand...
Click to collapse
Yes, I have an XtremeGuard body protector on it and it doesn't get in the way. I've taken it out of the case a few times and the protector's not bunching up. The protector's been on the Nex7 for over a week, so it's cured pretty well. I wouldn't try it on a fresh protector install. I'd give it about a week so that it sets right before putting it in a case like this.

Prey521 said:
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Click to expand...
Click to collapse
Picture #3, how did you get traffic webcam as widget? Seems useful.

taC nayN said:
Picture #3, how did you get traffic webcam as widget? Seems useful.
Click to expand...
Click to collapse
Ah, that's not a traffic cam widget....that my News360 App widget and the headline was for an overturned truck on a highway near my house lol

LovelyLush said:
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
Click to expand...
Click to collapse
I'm OK with the black case.....never been a fan of colorful cases. If I had to pick 1 other color, it would probably be like a dark blue.....nothing girly LOL

Nce review ty, I like the case seems decent for protection...even tho a tad thick. I think I well get this one even so based on the review plus I like the look.

Nice right up. Off subject what ROM are you running?

superman.namrepus said:
Nice right up. Off subject what ROM are you running?
Click to expand...
Click to collapse
Modaco JR6 with the Motley Kernel....runs like gangbusters!!

Prey521 said:
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Click to expand...
Click to collapse
Haha, that was going to be my question

Metalor696 said:
Haha, that was going to be my question
Click to expand...
Click to collapse
I have switched in the last few weeks to the Paranoid Android ROM with the Trinity Kernel. It runs great.

Thought about this case as well, but went with the official travel case.

Bought this case because of your review. It's exactly what I was looking for. Thanks.
Sent from my Google Nexus 7 using Tapatalk 2

I have a similar one bought off ebay. I'm happy with it. The only downside of that case is the circular bit at the back where it rotates.It can potentially scratch the back of the Nexus 7 so I have put a clear protective plastic on the back of the N7.

Your thoughts on magnetic holsters

Im looking for a holster, i found some but most have a magnetic closure. Im not sure if its ok for our phones so i just wantes your thoughts or experience with it. I use samsung pay every day and i dont want any sensor to be off because of the magnets.
Maybe im a little paranoid over it because it probably takes an extremely powerful magnet to cause any harm but im not willing to test it out lol

None of the magnetic items for the phones will cause any harm to your phone.
You may notice that the stylus doesn't work where the magnet is, but it will work just fine when you move the magnet.

As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.

kmarx said:
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
Click to expand...
Click to collapse
You do know many manufacturers use magnets in their devices and accessories, including Samsung and Apple, right? Every Apple smart case / cover utilizes magnets and (as much as I love Android) I can honestly think of no more reliable tablet than the iPad.

kmarx said:
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
Click to expand...
Click to collapse
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.

I do not recommend any of the Samsung Flip Cases to customers because I have seen them cause problems with devices before. I do not recommend magnetic closures because I have seen them cause problems with devices.
flyingwolf said:
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
Click to expand...
Click to collapse

kmarx said:
I do not recommend any of the Samsung Flip Cases to customers because I have seen them cause problems with devices before. I do not recommend magnetic closures because I have seen them cause problems with devices.
Click to expand...
Click to collapse
What sort of issues have you seen?
It seems strange that Samsung would release a product that would interfere with one of its flagship products and sell it as an accessory.

Mayonesa said:
Im looking for a holster, i found some but most have a magnetic closure. Im not sure if its ok for our phones so i just wantes your thoughts or experience with it. I use samsung pay every day and i dont want any sensor to be off because of the magnets.
Maybe im a little paranoid over it because it probably takes an extremely powerful magnet to cause any harm but im not willing to test it out lol
Click to expand...
Click to collapse
I'm not sure if this is specifically what you're asking about, but I've been using a Scosche MagicMount (http://amzn.com/B00I608BJ8) for my car dash and love it! I lay the larger metal plate (it comes with two sizes) at the bottom of my case, oriented where the longer sides are parallel to the bottom of the phone (let me know if you need a picture). I don't stick the plate to my phone, but rather set it inside my case. It turns out to be the perfect length and height for the Note 5. Wireless charging and Samsung Pay still work great. I used that picture of the Note 5 where someone made the back of transparent to make sure the wireless charging coil inside the phone does not over lap with the metal plate that comes with the mount.

I bought a nice leatherette case for my Note 5 only to find that the S-Pen does not work on the right hand side where the magnet is. I took it off immediately and went back to my Body Glove case.

flyingwolf said:
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
Click to expand...
Click to collapse
I purchased a wallet case on eBay. I noticed there were areas on the screen that wouldn't work. When I flipped the removable phone case there were 6 magnets...three on each side to hold the phone in the wallet. These magnets are small, but the impact was terrible! I I'm attaching pictures of me using the s pen to find the areas on the screen and the back of the phone case.

charlesrogers74 said:
I purchased a wallet case on eBay. I noticed there were areas on the screen that wouldn't work. When I flipped the removable phone case there were 6 magnets...three on each side to hold the phone in the wallet. These magnets are small, but the impact was terrible! I I'm attaching pictures of me using the s pen to find the areas on the screen and the back of the phone case.
Click to expand...
Click to collapse
-Sigh-
Like I said. "Magnets will in no way harm the phone"
This isn't harming your phone, it does do as you have seen which is a TEMPORARY issue and has already been discussed, it will cause no permanent harm to the phone.

I don't know about magnetic holsters but magnetic car mounts most definitely YES. I've used many holsters over the years, for all kinds of types of phones. I haven't really thought about it till I saw this post. My buddy has a good magnetic car mount for his s7 edge, but I don't really know anyone at the moment that's using a magnetic holster. Just my opinion though, the last time I used a holster was way back in January and it was actually pretty good. It was a best buy branded platinum, with kickstand holdster and case like a 3 in kind of deal but not magnetic. It fit could on my belt clips for my jeans and suit pants. Good luck

bought the Bracketron brand at best buy, the magnetic part is on the mount, it is a metal plate stick to your phone so no interference from the magnet, not owning a note 5 tho.

I put in some small tin paper cutouts INSIDE my note 5. I took the back cover off, peeled the sticker with the color/logo and spraypainted it a nice black then just glued the tin paper inside of that. Then I took a flat wireless charger and added neodymium magnets to it, modded it to be as small/thin as possible then covered it up with some black thin leather I bought from Michaels. I mounted it up to my car's console and now I just plop the phone onto it and it sticks tight and fast charges, no wires or case. Worked perfectly, but in hot weather the leather would become a bit slippery so it would slip off, but I fixed that with a couple of very small circular double sided gel tape on the bottom just to provide a bit of friction. I've ridden like this for the past 5 or 6 months and it doesn't slip or fall off at all, heavy bumps, hot weather, nothing dislodges it.
The only thing that doesn't work is the spen, and that's only directly over the magnets, but I wouldn't write on it anyway while it was mounted. Otherwise I've had zero difficulties with it. I'll post up pics if anyone is interested, but it's a bit frankenstein looking.

Smart flip-cover for Mi Pad

Can anyone recommend a flip cover with smart function (a magnet to unlock the screen) from either aliexpress or ebay that does not suffer from following symptoms:
a) too powerful magnet --> screen unlocks/locks when you fold the cover to the back
b) the plastic will not brittle or break in normal use
c) when folding the cover to a stand it will hold together and not fold open by itself.
I got a cheap cover from aliexpress and it has all the 3 problems mentioned above and was thinking to buy a new one but looking at the feedback of different models (incl. Mookie) all covers seem to suffer from 1 or many of the above mentioned problems so I am little hesitant to order a new one unless I am 100% (or at least 90%) certain that i will get fully functional smart flip cover.
E.g. This one looks good but there is no way of knowing if it suffers from the above problems or not:
http://www.ebay.com/itm/Luxury-High...Tablet-/152313007338?var=&hash=item2376900cea
So any recommendations? Please provide a link to the item if possible. Cheers.

Well I ordered the one in the first post and I am quite happy with it. Magnet is working fine and it won't turn the screen off when totally folded backwards. The cover's plastic hasn't shown any signs of breaking.
But the c) point could have been a bit better. There is no magnet holding the triangle-shaped fold that makes the tablet stand on landscape but so far it is still working okey while the tablets weight is holding the fold together.
So far I would recommend the particular product. Good quality, perfect openings for buttons and ports and etc.. Smart function works like a charm. I would give this 9/10.

Tautologica said:
Well I ordered the one in the first post and I am quite happy with it. Magnet is working fine and it won't turn the screen off when totally folded backwards. The cover's plastic hasn't shown any signs of breaking.
But the c) point could have been a bit better. There is no magnet holding the triangle-shaped fold that makes the tablet stand on landscape but so far it is still working okey while the tablets weight is holding the fold together.
So far I would recommend the particular product. Good quality, perfect openings for buttons and ports and etc.. Smart function works like a charm. I would give this 9/10.
Click to expand...
Click to collapse
If you hold it upside down with case closed, does it open?

Seems to stay closed.

I've ordered one and I'm really satisfied, thanks.
To anyone who wants to order it from AliExpress - it's called BGR Mi Pad case.

Get one from xiaomi.com or xiaomi app from your device. Only works if you are in China though. But I have one and it is built of fake leather and magnets and backside is pretty hard, I guess they put some metal plate in side of it.

Goodby Samsung Keyboard .... Hello Aftermarket

The Samsung keyboard is just a horrible design. The keyboard itself has a nice feel, but the way it attaches to the tablet and that backing that attaches to the tablet, it's just an accident waiting to happen. Mine was so glued to the back of my tablet I though I was going to bend the tablet getting it removed and in the end I had to use a plastic guitar pick to work it apart.
So I found this aftermarket keyboard (and case) on Amazon today:
https://www.amazon.com/Keyboard-Touchpad-Detachable-Wireless-Bluetooth/dp/B07X3D5H4R
Looks ideal to me. Going to take Samsung's keyboard back today.
I also picked up this case:
https://www.amazon.com/Infiland-Multiple-Samsung-SM-T860-Charging/dp/B07X1J2Y5Q/
I'm very pleased with it. I like that it folds over the end. A lot like the original Galaxy Tab S case that I had and that I really liked. Except this one protects the tablets edges and corners better.

I had one of those for the s3, the issue though they are nice keyboards is the battery doesn't last unless you turn it off constantly when not in use and you need to charge separately. With the s6 I want something that keeps the s-pen in place as well and all these cases rely on the magnet(poor design from samsung). I like the back kickstand piece, tho I agree the keyboard should have better attachments(better magnets and and a snap).

Keyboard case
Hi ChrisDos
If you have already bought the keyboard case with touchpad, kindly share your feedback on the same. Planning to buy one to go with my tab s6.

ChrisDos said:
The Samsung keyboard is just a horrible design. The keyboard itself has a nice feel, but the way it attaches to the tablet and that backing that attaches to the tablet, it's just an accident waiting to happen. Mine was so glued to the back of my tablet I though I was going to bend the tablet getting it removed and in the end I had to use a plastic guitar pick to work it apart.
So I found this aftermarket keyboard (and case) on Amazon today:
https://www.amazon.com/Keyboard-Touchpad-Detachable-Wireless-Bluetooth/dp/B07X3D5H4R
Looks ideal to me. Going to take Samsung's keyboard back today.
I also picked up this case:
https://www.amazon.com/Infiland-Multiple-Samsung-SM-T860-Charging/dp/B07X1J2Y5Q/
I'm very pleased with it. I like that it folds over the end. A lot like the original Galaxy Tab S case that I had and that I really liked. Except this one protects the tablets edges and corners better.
Click to expand...
Click to collapse
I actually came here to ask about that exact keyboard case. I also have the OEM Samsung keyboard case, and I actually like it (I'm using it to type on right now), but want some options with different style cases, since the OEM case isn't very protective, and I just like to switch it up every once in a while. Also the flexibility to move the keyboard away from the screen when I type would be nice sometimes, and i can use it with other bluetooth devices, such as my Note 10+ when I'm using DeX.
And yes, the OEM case is stuck on almost too well. Others complained about it not sticking...well, after about a day, I noticed it was just SLIGHTLY off center with the camera lens. It didn't hurt anything, but my OCD kicked. Holy shirt, I almost broke the hinge prying it off. I actually heard the hinge pop, and thought I had just broken my $180 case.
How do you like the aftermarket keyboard and case? How does the typing and the trackpad compare to the samsung version? Any complaints?
The only thing I think I would miss would be the kickstand from the Samsung case. I'm a police officer and can actually hang the tablet from my steering wheel with the Samsung kickstand and type reports (obviously not while I'm driving, LOL). I also use it as kind of a handle to hold the tablet in portrait mode when writing notes with the S-Pen or just surfing the internet.

Mr. Orange 645 said:
I actually came here to ask about that exact keyboard case. I also have the OEM Samsung keyboard case, and I actually like it (I'm using it to type on right now), but want some options with different style cases, since the OEM case isn't very protective, and I just like to switch it up every once in a while. Also the flexibility to move the keyboard away from the screen when I type would be nice sometimes, and i can use it with other bluetooth devices, such as my Note 10+ when I'm using DeX.
And yes, the OEM case is stuck on almost too well. Others complained about it not sticking...well, after about a day, I noticed it was just SLIGHTLY off center with the camera lens. It didn't hurt anything, but my OCD kicked. Holy shirt, I almost broke the hinge prying it off. I actually heard the hinge pop, and thought I had just broken my $180 case.
How do you like the aftermarket keyboard and case? How does the typing and the trackpad compare to the samsung version? Any complaints?
The only thing I think I would miss would be the kickstand from the Samsung case. I'm a police officer and can actually hang the tablet from my steering wheel with the Samsung kickstand and type reports (obviously not while I'm driving, LOL). I also use it as kind of a handle to hold the tablet in portrait mode when writing notes with the S-Pen or just surfing the internet.
Click to expand...
Click to collapse
First, thanks for being a first responder. Not enough people appreciate how hard your job is. Thank you.
As for the keyboard, I've very happy with it. Actually has a better typing experience than the Samsung keyboard. The keys have a scissor switch underneath. I found the case a bit too thick with the keyboard in there, but it was very well protected and there was a good gap to protect the screen. I'm carrying a USB-C to USB-C cable with me and I can use it to charge the keyboard from the tablet if necessary. Only down side to the keyboard is mine has a slight twist in it because it is so thin and it's made of plastic. Does not affect typing for me at all.
Since the keyboard can be separate from case, I'm actually using this case with the keyboard:
https://www.amazon.com/gp/product/B07X1J2Y5Q
There is enough room with the case for it to lay flat and for me to type just fine.
Over all, I much prefer this setup over the Samsung design.

ChrisDos said:
First, thanks for being a first responder. Not enough people appreciate how hard your job is. Thank you.
As for the keyboard, I've very happy with it. Actually has a better typing experience than the Samsung keyboard. The keys have a scissor switch underneath. I found the case a bit too thick with the keyboard in there, but it was very well protected and there was a good gap to protect the screen. I'm carrying a USB-C to USB-C cable with me and I can use it to charge the keyboard from the tablet if necessary. Only down side to the keyboard is mine has a slight twist in it because it is so thin and it's made of plastic. Does not affect typing for me at all.
Since the keyboard can be separate from case, I'm actually using this case with the keyboard:
https://www.amazon.com/gp/product/B07X1J2Y5Q
There is enough room with the case for it to lay flat and for me to type just fine.
Over all, I much prefer this setup over the Samsung design.
Click to expand...
Click to collapse
Thank you, I appreciate that.
I was actually considering that same idea...USB C to USB C to charge the keyboard on the go when needed. The Tab S6 battery is big enough, I don't think it would greatly impact battery life for me.
And I actually have that same Infiniland case. Bought it as a temporary solution to protect the tablet until the keyboard case arrived (though as i said, it doesn't really offer much protection).
I think you've convinced me to pull the trigger. Now...black or grey...Hmmm....

ChrisDos said:
The Samsung keyboard is just a horrible design. The keyboard itself has a nice feel, but the way it attaches to the tablet and that backing that attaches to the tablet, it's just an accident waiting to happen. Mine was so glued to the back of my tablet I though I was going to bend the tablet getting it removed and in the end I had to use a plastic guitar pick to work it apart.
So I found this aftermarket keyboard (and case) on Amazon today:
https://www.amazon.com/Keyboard-Touchpad-Detachable-Wireless-Bluetooth/dp/B07X3D5H4R
Looks ideal to me. Going to take Samsung's keyboard back today.
I also picked up this case:
https://www.amazon.com/Infiland-Multiple-Samsung-SM-T860-Charging/dp/B07X1J2Y5Q/
I'm very pleased with it. I like that it folds over the end. A lot like the original Galaxy Tab S case that I had and that I really liked. Except this one protects the tablets edges and corners better.
Click to expand...
Click to collapse
Just wondering if this keyboard has the Dex button for when you use Dex? If not how is it launched...Just by hitting the icon on the screen?

Jeffro64 said:
Just wondering if this keyboard has the Dex button for when you use Dex? If not how is it launched...Just by hitting the icon on the screen?
Click to expand...
Click to collapse
There is no button for Dex on the keyboard. I just touch/click the icon on the screen. I think it's also possible to have Dex launch on it's own once it detects the physical keyboard as I think I remember turning on that option in the Dex settings.

ChrisDos said:
There is no button for Dex on the keyboard. I just touch/click the icon on the screen. I think it's also possible to have Dex launch on it's own once it detects the physical keyboard as I think I remember turning on that option in the Dex settings.
Click to expand...
Click to collapse
That works for me...Thanks!

ChrisDos said:
The Samsung keyboard is just a horrible design. The keyboard itself has a nice feel, but the way it attaches to the tablet and that backing that attaches to the tablet, it's just an accident waiting to happen. Mine was so glued to the back of my tablet I though I was going to bend the tablet getting it removed and in the end I had to use a plastic guitar pick to work it apart.
So I found this aftermarket keyboard (and case) on Amazon today:
https://www.amazon.com/Keyboard-Touchpad-Detachable-Wireless-Bluetooth/dp/B07X3D5H4R
Looks ideal to me. Going to take Samsung's keyboard back today.
I also picked up this case:
https://www.amazon.com/Infiland-Multiple-Samsung-SM-T860-Charging/dp/B07X1J2Y5Q/
I'm very pleased with it. I like that it folds over the end. A lot like the original Galaxy Tab S case that I had and that I really liked. Except this one protects the tablets edges and corners better.
Click to expand...
Click to collapse
So I want the "case" half of the keyboard case. I won't use the keyboard at all. I also don't have an issue where I'd need to protect the screen. The reason I want that case part 8s because of the angles we can have the tablet, could you tell me how well that kick stand works? Thanks mate

le0.br4zuc4 said:
So I want the "case" half of the keyboard case. I won't use the keyboard at all. I also don't have an issue where I'd need to protect the screen. The reason I want that case part 8s because of the angles we can have the tablet, could you tell me how well that kick stand works? Thanks mate
Click to expand...
Click to collapse
Each case is similar. The keyboard case though has a few slots it more or less wants to be put in. The Infinland case has grippy feet on the bottom to let you put it at many angles.

Have you noticed any issues with the S Pen while using this case? It seems like all the other third party keyboard cases I've seen have magnets in them that can pull the pen a little in certain spots.

ChrisDos said:
The Samsung keyboard is just a horrible design. The keyboard itself has a nice feel, but the way it attaches to the tablet and that backing that attaches to the tablet, it's just an accident waiting to happen. Mine was so glued to the back of my tablet I though I was going to bend the tablet getting it removed and in the end I had to use a plastic guitar pick to work it apart.
So I found this aftermarket keyboard (and case) on Amazon today:
https://www.amazon.com/Keyboard-Touchpad-Detachable-Wireless-Bluetooth/dp/B07X3D5H4R
Looks ideal to me. Going to take Samsung's keyboard back today.
I also picked up this case:
https://www.amazon.com/Infiland-Multiple-Samsung-SM-T860-Charging/dp/B07X1J2Y5Q/
I'm very pleased with it. I like that it folds over the end. A lot like the original Galaxy Tab S case that I had and that I really liked. Except this one protects the tablets edges and corners better.
Click to expand...
Click to collapse
that kb case looks nice but i cant see a couple things mentioned about it, 1 how does it charge, is it micro or usbc? are the key back lit at all, if so what control is there and are they rgb?

Samsung's Keyboards are terrible and over priced. When I got my Tabs4 this is what I did. Got The Samsung Book Cover without Keyboard. Then I bought an Illuminated Logitech Keyboard and Mouse which have been excellent. Both are Bluetooth and have no problems. Got my S6 coming in tomorrow and planning on using Keyboard and Mouse with that as well. Both can control up to 3 devices.
Logitech K810 Illuminated Keyboard
https://www.logitech.com/en-us/product/bluetooth-illuminated-keyboard-k810?crid=27
Logitech MX Anywhere 2S Mouse
https://www.logitech.com/en-us/product/mx-anywhere-2s-flow?crid=7

mark2410 said:
that kb case looks nice but i cant see a couple things mentioned about it, 1 how does it charge, is it micro or usbc? are the key back lit at all, if so what control is there and are they rgb?
Click to expand...
Click to collapse
Think it's charged by microusb (looks like a keyboard I already have and think I see a microusb port at the side bottom right). No backlit from what I can see....
Paul_Deemer said:
Samsung's Keyboards are terrible and over priced. When I got my Tabs4 this is what I did. Got The Samsung Book Cover without Keyboard. Then I bought an Illuminated Logitech Keyboard and Mouse which have been excellent. Both are Bluetooth and have no problems. Got my S6 coming in tomorrow and planning on using Keyboard and Mouse with that as well. Both can control up to 3 devices.
Logitech K800 Illuminated Keybpard
https://www.logitech.com/en-us/product/bluetooth-illuminated-keyboard-k810?crid=27
Logitech MX Anywhere 2S Mouse
https://www.logitech.com/en-us/product/mx-anywhere-2s-flow?crid=7
Click to expand...
Click to collapse
Well, the big advantage of the samsung keyboard cover is the integrated keyboard solution... I don't want to run around with 3 seperate items . I do find it to work pretty decent and pleasantly...
Do agree it;s (way) overpriced though. Then again, spending even more on those seperate devices doesn't sound like the greatest solution for me...

Yeah I guess it depends what you use it for. I don't have a computer anymore so In the Morning I surf the Web and it really nice to have the seperate keyboard and mouse. And they can hold a charge for a week or two depending how how much you use em. Then when I go to work I just take the Tab so I can watch Football and Movies.
But really that keyboard is only a little bit wider than the tablet. It's not a full size keyboard but it's much nicer to type on. Just sharing my experience and what I use. Everyone will be different.

mark2410 said:
that kb case looks nice but i cant see a couple things mentioned about it, 1 how does it charge, is it micro or usbc? are the key back lit at all, if so what control is there and are they rgb?
Click to expand...
Click to collapse
It charges with a USB-C cable. Keys are not back lit.

I've bought one off of eBay for £20 - I only got it today, so haven't had a lot of time to test it out, but it does seem pretty good. For £20 I thought I couldn't go to wrong. The only problem I've noticed so far is some of the special characters aren't where they should be, but that's not particulary a deal breaker for me. The backlight is pretty cool on it too and the case is perfect for what I needed really. Link below is anyone is interested.
https://www.ebay.co.uk/itm/For-Sams...=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649&

There is a lot of hyperbole going on in this thread IMO.
I find the OEM keyboard has the following advantages:
(1) the physical connection via pogo pins allows instant response without worry about bluetooth sleep feature timeouts. For me this is a huge advantage over every bluetooth anything I have ever used.
(2) the kick stand is very dependable if you attach it correctly and the ability to keep the kickstand while also removing the keyboard is aces.
The OEM keyboard has the following disadvantages:
(1) The trackpad does not recognize a light double-tap as being a touch+drag the way a PC trackpad usually would. So resizing windows and dragging +dropping is awkward and best relegated to the touch screen (or an actual mouse).
(2) The number row is the wrong size.
(3) The arrow keys should be an inverted T and they are not.
Otherwise it is fine. Expensive for something which is only fine but I seriously cannot stress how much better the pogo pin connection is compared to bluetooth. Your mileage may vary but this keyboard IMO is fine and does improve the tablet experience.

anyone ever tried this case/kb? https://www.logitech.com/en-roeu/product/ultrathin-keyboard-folio-galaxy-tab4-10?crid=1221
im guesing it doesnt fit but looks great, or maybe they are doing an s6 version?