Related
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck
[UPDATE] .after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Click to expand...
Click to collapse
if you have a att note 3 you might be screwed both the firmwares you list are not for our phone your best bet would be to go to a best buy or att service center and seee if they can reflash your phone
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
jthornton71707 said:
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
Click to expand...
Click to collapse
Yeah, it seems that the N900XXUDNA6 is not for the US Variant
"N900XXUDNA6 Android 4.4.2 KitKat official firmware update for Galaxy Note 3 SM-N900 is now rolled out by Samsung. This is the first KitKat official firmware for Galaxy Note 3 SM-N900. The firmware update rolled out in various countries including Sri Lanka, Nepal, Indonesia, Singapore, Vietnam, Kazakhstan, Ukraine, Russia, Thailand and India"
The DNA6 would be for the SM-N900 Exynos CPU devices, not the SM-N900A Snapdragon. That is probably your problem (In addition to trying to roll back to JB from KK)
Unfortunately, I dont know of any stock KitKat firmware. There is MI9 on Samfirmware's site, but that is JB not KitKat
jthornton71707 said:
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
Click to expand...
Click to collapse
sorry.
B_I_N_G_E said:
sorry.
Click to expand...
Click to collapse
So after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
jthornton71707 said:
So after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
Click to expand...
Click to collapse
You could try to stop the boot, go back into Recovery and wipe cache, and wipe all data. I had an experience with my last device (SGSIII) that would boot loop sometimes when flashing back to a stock ROM.
Other than that, I dont have any other ideas
Just Googled the "SW REV CHECK FAIL" FUSED 3 BINARY 2", from what I found the Fused 3 means you were on Kit Kat, and Binary 2 basically means you are trying to downgrade to JB
It wont let me even boot into recovery. I hold the buttons and it boots back up saying "booting into recovery" like it is, then it just boot loops again.
jthornton71707 said:
It wont let me even boot into recovery. I hold the buttons and it boots back up saying "booting into recovery" like it is, then it just boot loops again.
Click to expand...
Click to collapse
The only other things I saw on that, suggested to users(on a different Samsung device) to use a jig to get it back into recovery. I am not familiar enough with the N3 yet to know if a jig will work on our devices. My guess is you messed up the bootloaders
Edit** I think that since things are so locked down that your best bet might be to try what jerrycoffman45 suggested a few posts ago
jerrycoffman45 said:
if you have a att note 3 you might be screwed both the firmwares you list are not for our phone your best bet would be to go to a best buy or att service center and seee if they can reflash your phone
Click to expand...
Click to collapse
My local at&t and best buy aren't very helpful for anything at all. ill keep googling ive been at this for 2 days now
There is no firmware to download for 4.4.2 yet so you are stuck till there is or do what I suggested you could also do a warranty exchange by calling att and you can't just go to any att store it has to be a service center
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
This might get you running
http://forum.xda-developers.com/showthread.php?t=2703006
Sent from my SAMSUNG-SM-N900A using Tapatalk
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck
[UPDATE] .after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
Click to expand...
Click to collapse
Still need help?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
only fix I know
as far as I have searched, the only current fix to get to use your phone is
GUIDE/ROM[4/1][AT&T][NC2_Bootloader][ N900AUCECMGL KITKAT][Stuck Download-Mode FIX]
Hey guys,
I need a little help for all your expertise please!
I have a AT&T S6 (SM-G920A) on the AT&T network. I bought the phone with 5.0.2 on it and really wanted to get Samsung Pay. I follow the instructions on the forums to use ODIN 3.10.7 to get to 5.1.1 (Baseband G20AUCU3BOI2).
Flashed all BL, AP, CP and CSC files. The phone flashed successfully but when it booted up, it stayed stuck on the Samsung screen and never went beyond that. I reflashed the AP file and got the phone to boot fine after that. When the OS loaded up, I didn't have AT&T network APN for LTE/mobile data. I found that quite strange since I know it's tied to the CSC file. So I tried to flash the phone again with just AP and CSC, which succeeds but then boots to the AT&T logo and hangs. So back to flashing the AP file and it books up fine again.
Once I get signed into my Samsung and Google account on the phone I click on the Samsung Pay logo in the App drawer. It takes a few minutes "Loading" then the Samsung Pay Install Screen shows. The phone spins for a minute then Samsung Pay closes and the error "Unforunately, Samsung Pay Stub has stopped."
Anyone have any ideas on what this could be? I've tried Odin 3.10.6 and 3.10.7, I've tried downloading G20AUCU3BOI2 from different sources as well.
Thanks for any help!
tokomoto said:
Hey guys,
I need a little help for all your expertise please!
I have a AT&T S6 (SM-G920A) on the AT&T network. I bought the phone with 5.0.2 on it and really wanted to get Samsung Pay. I follow the instructions on the forums to use ODIN 3.10.7 to get to 5.1.1 (Baseband G20AUCU3BOI2).
Flashed all BL, AP, CP and CSC files. The phone flashed successfully but when it booted up, it stayed stuck on the Samsung screen and never went beyond that. I reflashed the AP file and got the phone to boot fine after that. When the OS loaded up, I didn't have AT&T network APN for LTE/mobile data. I found that quite strange since I know it's tied to the CSC file. So I tried to flash the phone again with just AP and CSC, which succeeds but then boots to the AT&T logo and hangs. So back to flashing the AP file and it books up fine again.
Once I get signed into my Samsung and Google account on the phone I click on the Samsung Pay logo in the App drawer. It takes a few minutes "Loading" then the Samsung Pay Install Screen shows. The phone spins for a minute then Samsung Pay closes and the error "Unforunately, Samsung Pay Stub has stopped."
Anyone have any ideas on what this could be? I've tried Odin 3.10.6 and 3.10.7, I've tried downloading G20AUCU3BOI2 from different sources as well.
Thanks for any help!
Click to expand...
Click to collapse
Sounds like you performed the correct flashing steps on Odin but forgot to perform a factory reset after flashing the BL, AP, CP and CSC files. All the Odin guides I've read recommend to perform one. Reflash the 5.1.1 Odin files. Once it boots, turn off the phone. The hold Power+Vol Up+Home Key to enter bootloader. Then choose factory reset. This is how I performed it.
tibere86 said:
Sounds like you performed the correct flashing steps on Odin but forgot to perform a factory reset after flashing the BL, AP, CP and CSC files. All the Odin guides I've read recommend to perform one. Reflash the 5.1.1 Odin files. Once it boots, turn off the phone. The hold Power+Vol Up+Home Key to enter bootloader. Then choose factory reset. This is how I performed it.
Click to expand...
Click to collapse
Thanks so much for the tip, I feel like I've tried that but I'm going to do it again. I'll try anything at this point!
Update: Tried it but did not work. I tried to leave it on the Samsung load screen for 10+ minutes with no results.
http://forum.xda-developers.com/att-galaxy-s6/general/g920aucu2aof3-flashfire-update-t3156221
thanhvinhdtdd said:
http://forum.xda-developers.com/att-galaxy-s6/general/g920aucu2aof3-flashfire-update-t3156221
Click to expand...
Click to collapse
Not sure how this helps me? I am on B0I2.
Hello,
I have a Verizon S6 Edge, that I need help with. My phone was working fine and yesterday, all of a sudden it turned on, and is now stuck on the "Samsung Galaxy S6 Edge Powered by android" screen. It does not go past that. I can't even turn the phone off. I just have to wait for it to die. The phone has never been rooted and I've always just done OTA updates on it. I went to a local Best Buy to get it reflashed with the latest firmware but that still hasn't fixed it. I cannot access the recovery menu, only the download mode. I can also access maintenance mode which gives the option for Normal Boot, factory reset, safe mode, and USB Debugging. I have tried all those options but nothing different happens. I have downloaded the latest firmware from XDA and tried to flash it with ODIN and nothing happened there either. Any help is appreciated, I just don't want to throw my phone away. (I bought it last August)
Thanks!
I have the same problem, but i live in Mx and i can't find the stock rom anywhere. I hope someone can help us.
Hey, sorry to hear you're having issues.
Have you tried contacting Verizon or Samsung support yet?
Galaxy s6 verizon
good day,
after an OTA update my phone won't leave boot loop. although i can access download and recovery modes. I've tried resetting to factory defaults but it still won't pass the bootloader screen.
any help would be greatly appreciated thanks
---------- Post added at 10:44 AM ---------- Previous post was at 10:41 AM ----------
buttersocks said:
good day,
after an OTA update my phone won't leave boot loop. although i can access download and recovery modes. I've tried resetting to factory defaults but it still won't pass the bootloader screen.
any help would be greatly appreciated thanks
Click to expand...
Click to collapse
I've also tried flashing the official firmware via odin... It only says something like
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
Thanks again
spatadia14 said:
Hello,
I have a Verizon S6 Edge, that I need help with. My phone was working fine and yesterday, all of a sudden it turned on, and is now stuck on the "Samsung Galaxy S6 Edge Powered by android" screen. It does not go past that. I can't even turn the phone off. I just have to wait for it to die. The phone has never been rooted and I've always just done OTA updates on it. I went to a local Best Buy to get it reflashed with the latest firmware but that still hasn't fixed it. I cannot access the recovery menu, only the download mode. I can also access maintenance mode which gives the option for Normal Boot, factory reset, safe mode, and USB Debugging. I have tried all those options but nothing different happens. I have downloaded the latest firmware from XDA and tried to flash it with ODIN and nothing happened there either. Any help is appreciated, I just don't want to throw my phone away. (I bought it last August)
Thanks!
Click to expand...
Click to collapse
did you by chance use a pit file for odin as well as a full tar?
you could have messed up the partitions..
try to repartition it using odin or you can always try samsung smart switch emergency repair option etc.
elliwigy said:
did you by chance use a pit file for odin as well as a full tar?
you could have messed up the partitions..
try to repartition it using odin or you can always try samsung smart switch emergency repair option etc.
Click to expand...
Click to collapse
I didn't use any PIT files or anything. I just downloaded the stock OK7 firmware and put that in AP on odin, plugged my phone in under download mode and the update seems to go through fine but it still just boot loops. Doesn't go past the Galaxy S6 Edge screen. However, when I did that, there is now a padlock on my screen when it boots up and it also says custom under it and system status also says custom.
spatadia14 said:
I didn't use any PIT files or anything. I just downloaded the stock OK7 firmware and put that in AP on odin, plugged my phone in under download mode and the update seems to go through fine but it still just boot loops. Doesn't go past the Galaxy S6 Edge screen. However, when I did that, there is now a padlock on my screen when it boots up and it also says custom under it and system status also says custom.
Click to expand...
Click to collapse
something is not right then.. check the download md5 and what odin version you running?
custom padlock should go away after fresh install of a full odin tar which should be ~1.9gb zip before extracting it
Sent from my SM-G925V using XDA-Developers mobile app
elliwigy said:
something is not right then.. check the download md5 and what odin version you running?
custom padlock should go away after fresh install of a full odin tar which should be ~1.9gb zip before extracting it
Sent from my SM-G925V using XDA-Developers mobile app
Click to expand...
Click to collapse
I downloaded the stock one and installed it. Ithe was 1.86 GB. I put the md5 in the AP and that's it. Ithe downloads fine and installs fine on the phone but it just won't go past the boot screen and still has the custom padlock
so i recently got a note 3 from a friend to fix for her. it boots to the samsung logo then vibrates and reboots over and over, recovery just says "booting recovery" then it goes blank and reboots to the same booting recovery screen, shes doesnt know what version it had prior to bricking. she said one day it was working then turned off and never back on again, the odin mode screen had a2, a3 on it ill post a pic later anyway i can get into download mode so i figured id just flash with odin and be good, i tried to narrow down the proper firmware with the a3, but after flashing nc2, nl1, oc1, im still stuck odin says everything passed, i tried flashing the big main file, tried flashing them in each box at the same time, even tried it with the pit file, tried flashing with odin 3.9 and 3.10.7. same result odin says passed still cant access recovery or os. any help would be greatly appreciated. thanks
Open Odin, uncheck everything except f reset time, flash rom. When you see reset on the statutes window, remove USB cable from the phone, remove battery, wait 5 seconds, replace battery, boot directly into recovery, perform a factory wipe, reboot.
does it matter what version i flash? since im not really sure what version it had prior?
I can't figure out how to upload a photo I have xda 4.0, and can't post outside links yet. Anyway
It says
Product name:N900A
Current binary: Samsung official
System status official
Knox void status 0x0
Qualcomm Secureboot enabled(csb)
Ap swrev s2 t2 a2 a3 p2
Secure download enable
Udc start
Hope that helps
Ran Odin again with the settings you said, after the battery pull the phone says recovery booting, then turned off vibrated twice then same screen again and again. Thanks for the suggestion though any our ideas? I was searching and thought I seen somewhere that to unbrick it it needs to be the same firmware it had before, but I don't know what that was.
ghost5825 said:
Ran Odin again with the settings you said, after the battery pull the phone says recovery booting, then turned off vibrated twice then same screen again and again. Thanks for the suggestion though any our ideas? I was searching and thought I seen somewhere that to unbrick it it needs to be the same firmware it had before, but I don't know what that was.
Click to expand...
Click to collapse
You should probably ask her if she had Lollipop. If she did then that narrows it down to OC1 or OC2.
She doesn't know, not very phone literate as far as software, any ideas? I read in another thread to flash a modified version of nc2 but can't seem to find that version, this is the thread http://forum.xda-developers.com/showthread.php?t=2703006
Don't know if I can't find it, kinda confusing as far as what I need, like I said I've tried everything except oc2 cant find a link I've tried googling, and that thread says Odin files but can't find a full one for oc2, there's ones for safestrap but can't find Odin
I started getting a bootloop yesterday on my S5 Active g870A. I have repeatedly tried loading the stock firmware from this link: http://forum.xda-developers.com/showthread.php?t=2799754 with no luck at all. I have deleted and reinstalled Odin, the drivers AND the firmware to my laptop but the action always fails in Odin and the log always says the same thing.
The phone is in download mode and I have followed the instructions in the thread above every time. Can anyone help me out?
Here is a screen shot of the odin log....