hello everyone,
i bought a galaxy note 9 from saudi arabia, and i can't get OTA updates, i'm still on android 8.1 my csc is N960FOXM2ARK2 and csc from sw ver is KSA/XTC,KSA/KSA
can someone help me how to update to android 9?
juniel10 said:
hello everyone,
i bought a galaxy note 9 from saudi arabia, and i can't get OTA updates, i'm still on android 8.1 my csc is N960FOXM2ARK2 and csc from sw ver is KSA/XTC,KSA/KSA
can someone help me how to update to android 9?
Click to expand...
Click to collapse
This requires use of a computer (PC)!
Use a PC and install Samsung smart switch and update phone.
Or
Download samfirm.exe and download the latest firmware for KSA or XTC (depending on what is your CSC) and download the Odin file from sammobile.com firmware section and use Odin to update phone. (For instructions you can either use youtube for videos on updating with Odin for note 9, also you can go to sammobile.com firmware section search for your model and click on the latest firmware for your CSC and instructions should be at bottom of page with the Odin download link.)
Be careful though make sure you want to go to pie because once you do you might be stuck on pie and can NOT go back to oreo! So watch some note 9 pie videos first and read xda note 9 Questions forums before updating!
BluePhnx said:
This requires use of a computer (PC)!
Use a PC and install Samsung smart switch and update phone.
Or
Download samfirm.exe and download the latest firmware for KSA or XTC (depending on what is your CSC) and download the Odin file from sammobile.com firmware section and use Odin to update phone. (For instructions you can either use youtube for videos on updating with Odin for note 9, also you can go to sammobile.com firmware section search for your model and click on the latest firmware for your CSC and instructions should be at bottom of page with the Odin download link.)
Be careful though make sure you want to go to pie because once you do you might be stuck on pie and can NOT go back to oreo! So watch some note 9 pie videos first and read xda note 9 Questions forums before updating!
Click to expand...
Click to collapse
the Frija tool is excellent for downloading firmware as well, but to the OP, either one works just fine, neither is better really but the GUIs differ slightly. In any event, use samfirm or frija to download unless an extra 2+ hours of download time is preferable to you LoL
Related
Hi, I've got a galaxy note here in the Philippines, I bought it from a store who seems to have gotten the unit from another country, because I'm not getting the XXLA# updates, I'm still stuck at the KK5 update which I checked isn't for the philippines.
And since last week there's been and LA# OTA update for my friend's galaxy note which was purchased at a local samsung store here in the philippines, which i'm not getting on mine.
My question is if I manually update via Odin to the same firmware("philippine" firmware) as my friend's note. Will I still be able to get future OTA updates?
And if I do which updates will I be getting in the future, will i get the one he gets too, or will it still be from whatever country my unit came from.
Sorry for the long post. Thanks!
I think you can get future update using odin without losing root. If you go with OTA update in the future, but you will loose root.
ckelvin87 said:
Hi, I've got a galaxy note here in the Philippines, I bought it from a store who seems to have gotten the unit from another country, because I'm not getting the XXLA# updates, I'm still stuck at the KK5 update which I checked isn't for the philippines.
And since last week there's been and LA# OTA update for my friend's galaxy note which was purchased at a local samsung store here in the philippines, which i'm not getting on mine.
My question is if I manually update via Odin to the same firmware("philippine" firmware) as my friend's note. Will I still be able to get future OTA updates?
And if I do which updates will I be getting in the future, will i get the one he gets too, or will it still be from whatever country my unit came from.
Sorry for the long post. Thanks!
Click to expand...
Click to collapse
If you don't mind wiping your device (and backing up/restoring etc), you could change your CSC code to another region which is getting the updates sooner for example DBT. Search the forums on how to change it, and if you have done this after flashing the latest LA# stock ROM from your chosen region, you should receive all the latest updates OTA or via kies. If your csc doesn't match the stock rom region then lies won't update.
Sent from my GT-N7000 using xda premium
daranx said:
If you don't mind wiping your device (and backing up/restoring etc), you could change your CSC code to another region which is getting the updates sooner for example DBT. Search the forums on how to change it, and if you have done this after flashing the latest LA# stock ROM from your chosen region, you should receive all the latest updates OTA or via kies. If your csc doesn't match the stock rom region then lies won't update.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I've actually read a some about changing the csc of my device after putting up this post Sadly though when I checked my csc, I only have XEU.
So if I understand correctly, official OTA/Kies updates will be provided to your phone as long as you have an official rom with it's matching csc am I correct? And that the serial of the phone or any other data doesn't matter.
I had a uk unlocked note on XEU .. I couldnt change the CSC
I took the plunge because I was sick of the LA4 wait for the UK Version XEU
I flashed German LA4 with odin
My phone is now faster .... better keyboard and best of all I now have access to all the CSC's ..
If you flash an official firmware it doesnt affect the binary count ... I dont think it voids your warranty either because your flashing official samsung software
Here is a guide for flashing
http://forum.xda-developers.com/showthread.php?t=1424997
All you do is download odin , download LA4 from german note (all shown on page)
extract the LA4 kernal .... open up odin , click on pda and click on where you saved the file
Put your note into download mode (power , home and volume down) ....
click volume up
Then connect your phone to the usb cable ...... you will get a yellow confirmation on odin and click start .. within 5 mins you have new flashed version .. it doesnt wipe your handset all settings are kept
Plus you will then be able to change your csc to which ever country gets the next update (usually germany)
Good luck well worth the plunge ..
As you handset is XEU you will retain english settings
Hey i have samsung galaxy s7 i am updating my phone to nougat 7.0 using odin will i get 7.1.1 update via over the air update??? Or i still have to use odin again to update
aman93848474792929 said:
Hey i have samsung galaxy s7 i am updating my phone to nougat 7.0 using odin will i get 7.1.1 update via over the air update??? Or i still have to use odin again to update
Click to expand...
Click to collapse
Note 1 has no more updates after jellybean.
I have Samsung galaxy on5 I am updating my phone to nought 7.1.1 using Odin will I get future update via OTA Or i still have to use Odin again to update
Peace All...
I am currently on Minotauras ROM (MM) and would like to update my Note 5 920G to the latest Nougat firmware---so I can download a Nougat custom ROM (i know one is not dependent on the other, but I was always taught that if the base changes, its best to update the firmware to avoid any potential problems). However, I'm unclear as to what steps should be taken to update the firmware--I'm relatively new to SamSung devices. I know Odin is the update utility, but unclear whether I should first flash a "stock" Marshmallow Recovery and stock ROM--then take OTA...or can I just flash the Nougat firmware and then flash TWRP? What happens to my data & apps? Will all settings be erased?
Please advise.....
ZEDEK said:
Peace All...
I am currently on Minotauras ROM (MM) and would like to update my Note 5 920G to the latest Nougat firmware---so I can download a Nougat custom ROM (i know one is not dependent on the other, but I was always taught that if the base changes, its best to update the firmware to avoid any potential problems). However, I'm unclear as to what steps should be taken to update the firmware--I'm relatively new to SamSung devices. I know Odin is the update utility, but unclear whether I should first flash a "stock" Marshmallow Recovery and stock ROM--then take OTA...or can I just flash the Nougat firmware and then flash TWRP? What happens to my data & apps? Will all settings be erased?
Please advise.....
Click to expand...
Click to collapse
1)You are on stock Marshmallow 6.0.1 right as i guess so? Then you have MM bootloader(But if you are on 5.0.1 lollipop bootloader then you need atleast upgrade you bootloader to 6.0.1, you can find MM bootloaders at Samsung galaxy note 5 android development thread anywhere mostly at Dr.ketan Rom N8 S8+ port/You can also find Nougat bootloaders there only)
2)Don't worry then if you want to upgrade to any custom nougat rom then you can simply download prefer one and install through TWRP as you installed Minotorus Rom(Assuming You are on Marshmallow Bootloader and Oem unlocking/Usb debugging options are enabled from Developers option)
3)Or if you want to update your stock firmware to official Nougat for updated model and bootloader after that want to try Custom nougat rom, then you can download official Stock 7.0 firmware for your device N920G and specific country if available from websites like sammobile.com or samsungupdates.com etc (I am unknown about your country afaik samsung released 7.0 for N920G for some specific countries atm, like for asian countries not for latin american countries)
4)Further Odin flashing guides you can find also here within forum only, if you have any query related to odin flashing you can ask me i will provide you Odin flashing guide also(Kindly don't forget to enable Oem unlocking and Usb debugging option from developers option before flashing anything using Odin or you may brick your device)
5)You can also flash official stock 6.0.1 and update through OTA to 7.0 but above mentioned method is easy to directly update to nougat(Only if official Stock 7.0 nougat firmware available for your device model no and country)
6)While updating to stock firmware using odin, all your user data stored on internal storage will be lost(If you directly flash custom nougat rom on minotorus rom then user data stored on internal storage will be there) so i will suggest you take backup of your current data
Peace!!
First off--THANK YOU DroidHackeR for your response. I was out of town so I coulnt respond sooner. But Yes...I'm on MM 6.01 and I would prefer to upgrade to the offical 7.0 firmware. My model number is 920G, which I think is an International model.I am in the Unite States and using Tmobile's bands. I looked on sammobile and saw that they did have the official firmware (but for Bangladesh, India--I didnt see anything that said International...and thats where I kinda got stuck, cause I dont know if that firmware would be compatible). With that being said--I guess my best option would be to flash an official stock 6.01 firmware and then take the update? I have OEM unlocking and USB debugging enabled.
Could you please walk me through flashing via Odin? Like where would I find the stock 6.01 firmware? Sammobile as well? I know I will loose my data..I've backed up most of my files.
Thank you again for help!
ZEDEK said:
Peace!!
First off--THANK YOU DroidHackeR for your response. I was out of town so I coulnt respond sooner. But Yes...I'm on MM 6.01 and I would prefer to upgrade to the offical 7.0 firmware. My model number is 920G, which I think is an International model.I am in the Unite States and using Tmobile's bands. I looked on sammobile and saw that they did have the official firmware (but for Bangladesh, India--I didnt see anything that said International...and thats where I kinda got stuck, cause I dont know if that firmware would be compatible). With that being said--I guess my best option would be to flash an official stock 6.01 firmware and then take the update? I have OEM unlocking and USB debugging enabled.
Could you please walk me through flashing via Odin? Like where would I find the stock 6.01 firmware? Sammobile as well? I know I will loose my data..I've backed up most of my files.
Thank you again for help!
Click to expand...
Click to collapse
Well you can always flash the MM firmware in odin then take the OTA but ive always just flashed the new firmware via odin just because it easy.
And flashing firmware via odin will not wipe your device unless you change your CSC.ive used odin literally 100s of time across numerous devices over the years and it never has wiped my device...common misconception for some reason.
But of course first you need to find the correct firmware for your device on sammobile.
Then once downloaded un zip it and load the tar in the AP slot in odin.
Occasionally a factory reset is needed for the device to boot and that will wipe your storage.
There are tons of tutorials on how to use odin...hit that search button, use Google or even hit you tube for videos (which are useful if your a total n00b since you can see how it runs so no surprises).
If you do it once after that it will seem so easy.
Sent from my S8 plus, Note 7, S7 Edge or S6
force70 said:
Well you can always flash the MM firmware in odin then take the OTA but ive always just uflashed the new firmware via odin just because it easy.
And flashing firmware via odin will not wipe your device unless you change your CSC.ive used odin literally 100s of time across numerous devices over the years and it never has wiped my device...common misconception for some reason.
But of course first you need to find the correct firmware for your device on sammobile.
Then once downloaded un zip it and load the tar in the AP slot in odin.
Occasionally a factory reset is needed for the device to boot and that will wipe your storage.
There are tons of tutorials on how to use odin...hit that search button, use Google or even hit you tube for videos (which are useful if your a total n00b since you can see how it runs so no surprises).
If you do it once after that it will seem so easy.
Sent from my S8 plus, Note 7, S7 Edge or S6
Click to expand...
Click to collapse
Hi,
Thanks for your inputs. I tried same steps for my N9208 dual SIM with stock 6.0.1 firmware from sammobile.
After Odin flash, boots to stock recovery and throws dm-verify check failed error.
Please share your suggestions.
TheRealFighter said:
Hi,
Thanks for your inputs. I tried same steps for my N9208 dual SIM with stock 6.0.1 firmware from sammobile.
After Odin flash, boots to stock recovery and throws dm-verify check failed error.
Please share your suggestions.
Click to expand...
Click to collapse
I would suggest that next time you use the search function to try and help your self first as learning is key here.
That said i did a quick search for you which led to many results but this is an excellent read.
https://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306/page2
force70 said:
I would suggest that next time you use the search function to try and help your self first as learning is key here.
That said i did a quick search for you which led to many results but this is an excellent read.
https://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306/page2
Click to expand...
Click to collapse
I did read that thread. Too many answers and not much clarity.
Hence asked you.
Anyway thanks.
TheRealFighter said:
I did read that thread. Too many answers and not much clarity.
Hence asked you.
Anyway thanks.
Click to expand...
Click to collapse
That was only one of numerous results which resulted from a quick search though i posted that because i am familiar with it.
Sent from my S8 plus, Note 7, S7 Edge or S6
*Need a working 6.01 Firmware for 920G International*
force70 said:
Well you can always flash the MM firmware in odin then take the OTA but ive always just flashed the new firmware via odin just because it easy.
And flashing firmware via odin will not wipe your device unless you change your CSC.ive used odin literally 100s of time across numerous devices over the years and it never has wiped my device...common misconception for some reason.
But of course first you need to find the correct firmware for your device on sammobile.
Then once downloaded un zip it and load the tar in the AP slot in odin.
Occasionally a factory reset is needed for the device to boot and that will wipe your storage.
There are tons of tutorials on how to use odin...hit that search button, use Google or even hit you tube for videos (which are useful if your a total n00b since you can see how it runs so no surprises).
If you do it once after that it will seem so easy.
Sent from my S8 plus, Note 7, S7 Edge or S6
Click to expand...
Click to collapse
Peace...
Well.. I searched YouTube video tutorials, GooGle searched and went to SamFirmware and downloaded a 6.01 stock firmware. However, the file I downloaded was for Bangladesh (I have a 920G model) and it failed when trying to flash it via Odin. So I downloaded another 6.01 firmware--this time for Brazil (as all tutorials have stated that as long as the model number is the same its ok to flash). At first the green loading bar was working and it got all the way through to radio image and then it failed---but now my system has been wiped and now my phone is bricked. Do you or any other member know of a 920G 6.01 firmware that is compatible for the USA? It appears the radios are not compatible causing it to FAIL in flashing it in Odin.
Any assistance would be greatly appreciated.
ZEDEK said:
Peace...
Well.. I searched YouTube video tutorials, GooGle searched and went to SamFirmware and downloaded a 6.01 stock firmware. However, the file I downloaded was for Bangladesh (I have a 920G model) and it failed when trying to flash it via Odin. So I downloaded another 6.01 firmware--this time for Brazil (as all tutorials have stated that as long as the model number is the same its ok to flash). At first the green loading bar was working and it got all the way through to radio image and then it failed---but now my system has been wiped and now my phone is bricked. Do you or any other member know of a 920G 6.01 firmware that is compatible for the USA? It appears the radios are not compatible causing it to FAIL in flashing it in Odin.
Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
1)Did you try to put 4files firmware that comes with BL,AP,Modem,CL separately?
2)As You can get into download mode successfully kindly install samsung smartswitch on your phone>connect your device to pc while in download mode>open smartswitch>select emergency software recovery so that it will recognise your device as well as actual latest firmware for your device to be installed
3)If smartswitch doesn't help anymore, try with full firmware(4 files firmwate of any of Latin American countries as you stated for USA, may be the country's that lies near to you by region) but this time you need to uninstall smartswitch or Samsung kies in case installed as it could possibly mess up with Odin flashing
AssassinCreed said:
1)Did you try to put 4files firmware that comes with BL,AP,Modem,CL separately?
2)As You can get into download mode successfully kindly install samsung smartswitch on your phone>connect your device to pc while in download mode>open smartswitch>select emergency software recovery so that it will recognise your device as well as actual latest firmware for your device to be installed
3)If smartswitch doesn't help anymore, try with full firmware(4 files firmwate of any of Latin American countries as you stated for USA, may be the country's that lies near to you by region) but this time you need to uninstall smartswitch or Samsung kies in case installed as it could possibly mess up with Odin flashing
Click to expand...
Click to collapse
Peace AssassinsCreed...
Thank you for ur response. This is my first SamSung phone---I came from HTC and was familiar with their process of rooting and updating (which was a pain)--but I'm totally unfamiliar with Odin.
When you say put the files in separately---i'm not sure what you mean, cause when I extract the Update zip, I only get a a tar file---should I unzip in a folder?
Thanks again!!!
Use flash fire
Hello,
One of my friend bought a used Samsung Note 5 (N920T) in the Saudi Arabia. When i check his mobile the version is 6.0 and in the Device Status "Custom". I tried to find the software update but couldn't find. Then i google and found that this is T-Mobile. Everything is working fine but he can't update.
It seem that the old owner rooted and using in Saudi Arabia. Now my question is if i download the latest firmwere from sammobile.com --> firmwares --> galaxy-note5 --> SM-N920T and apply. Will the phone still work.
Is there any way i can unroot the phone and use the official firmware and get future updates. I am new to this field. Your expert advise is highly appreciated.
Many Thanks,
Naazgi
Just do a clean install with the original firmware.
I'm having a similar experience, trying to go back to Stock via Samfirm and Odin, but Im not quite sure what to do with a .enc4 file. I've searched numerous places on this site, and they all say to rename it as a zip and extract. Doing so however corrupts the file. Guess ill have to wait 4 days for a sammobile download...
I have been using Note9 Exynos 128GB Singapore version. Last update was on October'19. I'm yet to get Android 10 update. Need to know is there anyone facing same issue? Anyone have any update on getting OTA for Singapore version?
According to Samsung, the note 9 in all Versions will not get Android 10 before February 2020. My Provider here in Europe told me the same, so i made oan update with odin.
But anyway, the update is officially not out yet, according to samsung.
crystalpepe said:
According to Samsung, the note 9 in all Versions will not get Android 10 before February 2020. My Provider here in Europe told me the same, so i made oan update with odin.
But anyway, the update is officially not out yet, according to samsung.
Click to expand...
Click to collapse
If I do update using odin, will I need to do rooting? One I update using Odin, will there be official update coming regularly?
It hasn’t been release yet in Singapore.
Samsung said February. However today is Feb 26 and still nothing. The gang of three (Singtel, Starhub and M3) have to put their rubbish in the rom so they won’t meet the deadline I think. Every year the same story. Singapore gets less frequent update than other markets making Samsung phones a real security hazard. I have to praise Apple for cutting the telcos and going on their own update cycle.
I applied the update on my Note 9 but I am having battery life issues. Have to use power saving mode all the time if not the battery is gone within half a day. I will do a full reset once the official XSP built for Singapore is out.
My wife's s9 has received the update. Me on the other hand, note 9, still nothing. They are Soo freaking slow with updates.
I downloaded and flashed the German rom from sammobile website using odin. Now my note 9 is running One UI 2 and Android 10 with Feb 2020 security patch. Everything seems to be working well so far
Note: when flashing using Odin, select "home csc" to preserve user data, or "csc" for full wipe. Personally I did a full wipe
Using N960F bought from M1, using on Gomo network (previously Starhub)
Can you please teach me how to update my NOTE 9 128gb variant from STARHUB? I'm getting frustrated about this. Everyone in the whole world got the android 10 update, Singapore is always last on the list.
fabienpascal said:
It hasn’t been release yet in Singapore.
Samsung said February. However today is Feb 26 and still nothing. The gang of three (Singtel, Starhub and M3) have to put their rubbish in the rom so they won’t meet the deadline I think. Every year the same story. Singapore gets less frequent update than other markets making Samsung phones a real security hazard. I have to praise Apple for cutting the telcos and going on their own update cycle.
I applied the update on my Note 9 but I am having battery life issues. Have to use power saving mode all the time if not the battery is gone within half a day. I will do a full reset once the official XSP built for Singapore is out.
Click to expand...
Click to collapse
You should be getting it soon. As I got the Android 10 update a couple of months after it was released in Germany.
All the countries using the N960F Variant received the Android 10 update. There is even up to 4 different built with bug fixes and security updates.
Last built released in Singapore: Oct 24...
DzunjaBien said:
Can you please teach me how to update my NOTE 9 128gb variant from STARHUB? I'm getting frustrated about this. Everyone in the whole world got the android 10 update, Singapore is always last on the list.
Click to expand...
Click to collapse
You can follow these steps (works for both telco and retail models, so will work on your Starhub model too):
1. Download the firmware for N960F model from sammobile ( I downloaded both UK BTU and German DBT rom and both worked - currently using the German one, I think it doesn't matter which country the firmware is designed for as long as it isn't tied to a specific carrier).
Note: the rom is quite big, around 5GB so be patient. I left my laptop on overnight while the rom downloaded.
2. Unzip the rom and you should see 5 files inside the folder
3. Use Odin to flash the files (please backup all data before attempting to make any modification to your software - I used Samsung cloud to back up phone settings and manually backed up everything else to micro sd)
a) download latest odin version and unzip it. Run the exe
b) Add the respective files. The BL, AP, CP and CSC files are named accordingly. Make sure to select the correct files for each selection while flashing. To preserve data on your phone, select the home csc file instead of csc. Selecting csc will wipe the entire phone giving you a clean reset.
c) your phone needs to be booted to recovery mode in order to flash the rom
4. Enjoy your Samsung note 9 with Android 10
If unsure, just google for detailed instructions on how to use odin.
Hope it helps!
bomblim said:
You can follow these steps (works for both telco and retail models, so will work on your Starhub model too):
1. Download the firmware for N960F model from sammobile ( I downloaded both UK BTU and German DBT rom and both worked - currently using the German one, I think it doesn't matter which country the firmware is designed for as long as it isn't tied to a specific carrier).
Note: the rom is quite big, around 5GB so be patient. I left my laptop on overnight while the rom downloaded.
2. Unzip the rom and you should see 5 files inside the folder
3. Use Odin to flash the files (please backup all data before attempting to make any modification to your software - I used Samsung cloud to back up phone settings and manually backed up everything else to micro sd)
a) download latest odin version and unzip it. Run the exe
b) Add the respective files. The BL, AP, CP and CSC files are named accordingly. Make sure to select the correct files for each selection while flashing. To preserve data on your phone, select the home csc file instead of csc. Selecting csc will wipe the entire phone giving you a clean reset.
c) your phone needs to be booted to recovery mode in order to flash the rom
4. Enjoy your Samsung note 9 with Android 10
If unsure, just google for detailed instructions on how to use odin.
Hope it helps!
Click to expand...
Click to collapse
You can actually use samfirm or frija(both in xda) to download the firmware within 5mins
bomblim said:
You can follow these steps (works for both telco and retail models, so will work on your Starhub model too):
1. Download the firmware for N960F model from sammobile ( I downloaded both UK BTU and German DBT rom and both worked - currently using the German one, I think it doesn't matter which country the firmware is designed for as long as it isn't tied to a specific carrier).
Note: the rom is quite big, around 5GB so be patient. I left my laptop on overnight while the rom downloaded.
2. Unzip the rom and you should see 5 files inside the folder
3. Use Odin to flash the files (please backup all data before attempting to make any modification to your software - I used Samsung cloud to back up phone settings and manually backed up everything else to micro sd)
a) download latest odin version and unzip it. Run the exe
b) Add the respective files. The BL, AP, CP and CSC files are named accordingly. Make sure to select the correct files for each selection while flashing. To preserve data on your phone, select the home csc file instead of csc. Selecting csc will wipe the entire phone giving you a clean reset.
c) your phone needs to be booted to recovery mode in order to flash the rom
4. Enjoy your Samsung note 9 with Android 10
If unsure, just google for detailed instructions on how to use odin.
Hope it helps!
Click to expand...
Click to collapse
All noted! Thank you very much. Last question. My Note 9 from Starhub is still on plan, and only for starhub carrier. Can I change the firmware even if this one still not finished on payment?
DzunjaBien said:
All noted! Thank you very much. Last question. My Note 9 from Starhub is still on plan, and only for starhub carrier. Can I change the firmware even if this one still not finished on payment?
Click to expand...
Click to collapse
Yup this is no issue. Flashing the official samsung rom via Odin is like manually updating the software and we are not making any "illegal" modification which can trip Knox, so no worry about warranty being voided.
I have attached a screenshot of my current software info. As you can see, my handset was bought from M1 shop. After I flashed a non-Singapore rom, the original carrier info remains intact so I can use the phone without any issue. In your case, after flashing the rom, your carrier info will still remain as Starhub
If you manage to update your phone successfully to Android 10 with no issue, just post it here so that others can update their phones too. Keeping my fingers crossed for you!
Reminder: Please backup everything before updating to be on the safe side
I'm back! I followed your instruction and the instruction from Sammobile. Everything went well! So far no problem after updating to Android 10. At first I was worried that when I upgrade it, my phone will be locked or bricked because I'm still paying it monthly at Starhub. But now I can still use my phone. I made sure to back up first using Samsung Smart Switch. I love the android 10 update. Everything becomes smooth and fast! Thank you very much!
Hi,
I have a note 8 (SM-N950F) UK. It's unlocked and is still on Android 8.0.0 and the security patch version is 01/04/2018.
When I try do an OTA update it says I've got the latest version of the software installed. I've downloaded Samsung Smart Switch and and that says "Your device software is up to date: RD7(XEU)
I don't think my note 8 has a OEM version of the rom on it. (When I originally got it, I believe it was on the EE network, but wasn't locked to that network).
I was wondering if anybody can help me with the fact i can't seem to update it to Android version to 9 or update the security software.
The details are:
AP: N950FXXU3CRD7
CP: N950FXXU3CRB9
CSC: N950FOXM3CRDC
Don't really know what the above means, but would like to update the ROM to Android 9.
Many thanks in advance for any advice you can give.
Terry.
telthenipper said:
Hi,
I have a note 8 (SM-N950F) UK. It's unlocked and is still on Android 8.0.0 and the security patch version is 01/04/2018.
When I try do an OTA update it says I've got the latest version of the software installed. I've downloaded Samsung Smart Switch and and that says "Your device software is up to date: RD7(XEU)
I don't think my note 8 has a OEM version of the rom on it. (When I originally got it, I believe it was on the EE network, but wasn't locked to that network).
I was wondering if anybody can help me with the fact i can't seem to update it to Android version to 9 or update the security software.
The details are:
AP: N950FXXU3CRD7
CP: N950FXXU3CRB9
CSC: N950FOXM3CRDC
Don't really know what the above means, but would like to update the ROM to Android 9.
Many thanks in advance for any advice you can give.
Terry.
Click to expand...
Click to collapse
BACKUP First!!
On PC: (computer)
-Download samfirm.exe or frija
-Download latest Odin version (can be found in sammobile.com firmware section or google search)
-Open up samfirm.exe or frija use : SM-N950F and XEU in the search fields and download file (~4.8 GB File) and unzip the zip file.
-Open Odin and put PHONE in download mode and connect to PC.
-Place the 4 files in its correct place:
BL = BL-FILE
AP = AP-FILE
CP = CP-FILE
CSC = CSC-FILE or HOME-CSC FILE **
** CSC-FILE WILL DELETE EVERYTHING and bring back to factory settings (like doing factory reset!) Backup first before choosing this file.
** HOME-CSC FILE will keep data intact
So choose only ONE File!!!
If you run into bugs after update do a factory reset!
They're YouTube guides on how to use Odin and samfirm.exe or frija!
But beware that you CAN NOT go back to android 8 period! So make sure that you really want to go to pie!!
Just to add to what Bluephnx said, the link below will help you on how to use Odin, but also has the download link for SamFirm. (For region in Samfirm, use either XEU, which is UK and Ireland, or BTU, which is UK, or you will get carrier bloatware. You can obviously flash carrier filmware if you choose)
https://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072
Many thanks for that. Much appreciated.
I'll give what you suggest a go.
Really don't understand why I can't do it OTA tho', would there be something wrong with my phone to stop OTA update working?
And is there any reason not to go to Pie (9) and stick on 8 that you know of?
telthenipper said:
Many thanks for that. Much appreciated.
I'll give what you suggest a go.
Really don't understand why I can't do it OTA tho', would there be something wrong with my phone to stop OTA update working?
And is there any reason not to go to Pie (9) and stick on 8 that you know of?
Click to expand...
Click to collapse
It just glitches/bugs out sometimes. It has happened to me before, but once flashing via Odin, it usually resolves the OTA problem. You could try a factory reset, which can sometimes resolve the OTA bug, just back your data up first.
I honestly can't remember what Oreo was like to make a comparison for you, but some people do hate Pie, where I have been very happy with it since it's launch.
Here is a little explanation of Pie on the Note 8 on YT that you may find useful.
https://youtu.be/eAa2rQ-mF-Y
telthenipper said:
Many thanks for that. Much appreciated.
I'll give what you suggest a go.
Really don't understand why I can't do it OTA tho', would there be something wrong with my phone to stop OTA update working?
And is there any reason not to go to Pie (9) and stick on 8 that you know of?
Click to expand...
Click to collapse
Did you ever do the OTA update yourself before on that phone or did you just buy it on AP: N950FXXU3CRD7 CP: N950FXXU3CRB9 CSC: N950FOXM3CRDC? If it's been that way since you got it then the most likely answer is that someone else updated it using a version of firmware that can't update via OTA and the only way to fix that is to use odin and flash the latest version of firmware.