Database Develop

Quicky. installing latest kernel guide

Hi,
Sorry, I know this has been covered loads before but im still a little confused on the method.
Im running a great custom rom on my SGA called MindCR. I would like to be able to flash an updated custom kernel.
Im attempting to flash Rafael.Baugis. E3 Stable.
Code:
How to install Kernel with E3 Recovery (Stock):
shutdown the phone
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-XXX-boot.img.zip )
wait the end of process and reboot
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( Select_you_rom_file.zip )
wait the end of process
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-modules.zip )
wait the end of process and reboot
Do I download stock-kernel.tar ? and from the stock recovery, apply update from sdcard, choose stock-kernel?
Do I need to wipe cache afterwards?
Sorry this is so easy for most, but to me those instructions are confusing!
many thanks for your help xda
(ps,. i would of posted this in the dev section but i don't have enough posts)

The solution is in your post itself..
From Rafaels Skydrivd download the two files.. And flash exactly as given in his post
GT-S5830i

sam1136 said:
The solution is in your post itself..
From Rafaels Skydrivd download the two files.. And flash exactly as given in his post
GT-S5830i
Click to expand...
Click to collapse
A: .tar files are to be flashed in Odin
- on the phone go to download mode: keep the [+] and [-] pressed while you power on, when the menu pops out, press [+] again
- on the pc launch Odin, connect the phone with the usb cable, it should lite up a COM-x port if drivers are installed (Rafael provides those too)
- in Odin, press the PIT button, select the cooperve_0623.pit file, press the PDA button, select the 2012***E3-PDA-boot.tar file, uncheck Re-Partition. Start!
B: .zip files are to be flashed in recovery mode, no need for PC
- move the zip file to the sd card
- go to recovery mode: keep the [+] and [Home] pressed while u power on for around 8seconds, a recovery menu will pop out soon after. if it reboots you've kept the 3 buttons pressed too much time, try again.
- select browse for zip file. choose 2012***E3-boot.zip. flash it. choose 2012***E3-modules.zip. flash it. Reboot. No need to wipe anything.
Everything should be clear from Rafael's kernel post, link to files is <<< Custom Kernel and Modules >>> and you can navigate outside the default skydrive folder to find stuff like windows driver and etc.
you can navigate there upper so you will find also driver files etc.

bobdynlan said:
A: .tar files are to be flashed in Odin
- on the phone go to download mode: keep the [+] and [-] pressed while you power on, when the menu pops out, press [+] again
- on the pc launch Odin, connect the phone with the usb cable, it should lite up a COM-x port if drivers are installed (Rafael provides those too)
- in Odin, press the PIT button, select the cooperve_0623.pit file, press the PDA button, select the 2012***E3-PDA-boot.tar file, uncheck Re-Partition. Start!
B: .zip files are to be flashed in recovery mode, no need for PC
- move the zip file to the sd card
- go to recovery mode: keep the [+] and [Home] pressed while u power on for around 8seconds, a recovery menu will pop out soon after. if it reboots you've kept the 3 buttons pressed too much time, try again.
- select browse for zip file. choose 2012***E3-boot.zip. flash it. choose 2012***E3-modules.zip. flash it. Reboot. No need to wipe anything.
Everything should be clear from Rafael's kernel post, link to files is <<< Custom Kernel and Modules >>> and you can navigate outside the default skydrive folder to find stuff like windows driver and etc.
you can navigate there upper so you will find also driver files etc.
Click to expand...
Click to collapse
thanx ....

Ahahahhhhahahahah lol
Quicky
Sent from my GT-S5830i using xda app-developers app

Stuck in Bootloop after installing SuperSu using TWRP for samung M20

So, I was on Android 10, I was trying to root using Magisk & TWRP as mentioned in this XDA Post.
Title:: "[RECOVERY] TWRP 3.3.0 for Galaxy M20" , By DarkLord1731, Senior Member on 3rd March 2019, 08:54 AM (**mentioning because i cant post link**)
Even after multiple attempts, I was unable to install
1. no-verity-opt-encrypt 2. RMM Bypass zip using TWRP.
Both kept on failing even when i tried different versions.
-------------
Later on when i tried flashing SuperSU , phone got bootlocked
still stuck, any help would be appreciated.
-------
Installation Steps:
- First, make sure your phone isn't RMM Locked.
- Download Odin3 v3.13.1, Samsung USB Drivers, latest TWRP's tar for your variant, latest no-verity-opt-encrypt zip, latest Magisk.zip and RMM Bypass zip by Black Mesa, and copy all of them to your external sd card.
- Go to Settings App, Developer Options and enable OEM Unlock (If you don't see Developer Setings, go into About phone>Software info and tap "Build number" 10 times to show Developer Options menu).
- Do a backup of all your important data and files in your phone.
- Shutdown the phone. Once it's off, Power it On in Download Mode (Connect your phone to your PC, press and hold Power, Vol + and Vol - buttons together )
- Open Odin3, go in Option section and untick "Auto-reboot". Once that click the "AP" button and select the TWRP tar you downloaded before, then press the "Start" button.
- Once Odin3 finished to flash the recovery (you should see a "PASS" message), force reboot your phone (Press and hold Power and Vol - buttons together) and once the screen is off, press and hold Power and Vol + buttons together to boot in TWRP.
- Once TWRP is booted you first need to decrypt your /data partition. To do so touch Wipe>Format Data and follow the instructions in screen.
- Once it finished go back at the home screen and touch Reboot>Recovery. TWRP should be able to mount your data partition. Now flash the no-verity-opt-encrypt, Magisk(necessary to prevent bootloops) and RMM Bypass zip you downloaded before (touch Install and select each zip to flash it)
- You're now able to reboot to your OS without re-encrypting /data partition and without RMM Prenormal lock.

Akshay4497 said:
So, I was on Android 10, I was trying to root using Magisk & TWRP as mentioned in this XDA Post.
Title:: "[RECOVERY] TWRP 3.3.0 for Galaxy M20" , By DarkLord1731, Senior Member on 3rd March 2019, 08:54 AM (**mentioning because i cant post link**)
Even after multiple attempts, I was unable to install
1. no-verity-opt-encrypt 2. RMM Bypass zip using TWRP.
Both kept on failing even when i tried different versions.
-------------
Later on when i tried flashing SuperSU , phone got bootlocked
still stuck, any help would be appreciated.
-------
Installation Steps:
- First, make sure your phone isn't RMM Locked.
- Download Odin3 v3.13.1, Samsung USB Drivers, latest TWRP's tar for your variant, latest no-verity-opt-encrypt zip, latest Magisk.zip and RMM Bypass zip by Black Mesa, and copy all of them to your external sd card.
- Go to Settings App, Developer Options and enable OEM Unlock (If you don't see Developer Setings, go into About phone>Software info and tap "Build number" 10 times to show Developer Options menu).
- Do a backup of all your important data and files in your phone.
- Shutdown the phone. Once it's off, Power it On in Download Mode (Connect your phone to your PC, press and hold Power, Vol + and Vol - buttons together )
- Open Odin3, go in Option section and untick "Auto-reboot". Once that click the "AP" button and select the TWRP tar you downloaded before, then press the "Start" button.
- Once Odin3 finished to flash the recovery (you should see a "PASS" message), force reboot your phone (Press and hold Power and Vol - buttons together) and once the screen is off, press and hold Power and Vol + buttons together to boot in TWRP.
- Once TWRP is booted you first need to decrypt your /data partition. To do so touch Wipe>Format Data and follow the instructions in screen.
- Once it finished go back at the home screen and touch Reboot>Recovery. TWRP should be able to mount your data partition. Now flash the no-verity-opt-encrypt, Magisk(necessary to prevent bootloops) and RMM Bypass zip you downloaded before (touch Install and select each zip to flash it)
- You're now able to reboot to your OS without re-encrypting /data partition and without RMM Prenormal lock.
Click to expand...
Click to collapse
Don't touch twrp with stock rom, it is quite complicated.
Guide:
1. Download magisk manager(mm) and stock rom
(Backup data using Smart Switch on windows)
2. Copy AP file into internal storage
3. Open mm and choose install magisk
4. Choose select and patch a file
5. Patch the AP file.
6. Use Odin flash the AP file with other files(BL, CSC,...)
7. Reboot( all of ur data will be wiped)
8. Restore data
9. Enjoy
(P/s: i thought i posted last week but just found out that i didn't click post)

Try to root using Magisk to patch boot.img
it is wrking on all samsung devices even with last update of android 10.

One UI 3.0 beta released for Galaxy Z Fold2 5G (Korean only)

One UI 3.0 stable has been released for Galaxy Z Fold2! You may check for updates in your Settings. If it's not available yet in your region, please check the following steps:
Video tutorial:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by @invmini :
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
---- BEFORE STABLE UPDATE ----
One UI 3.0 beta has been released for Galaxy Z Fold2 5G.
If you are part of the supported regions, you can grab the update link and share it here (for each update).
These are the steps I borrowed from @AhmedMomen 's S10 thread.
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from Play Store.
2. Open HTTP Canary app.
3. Start the update by pressing "Download". Don't pause it!
4. Go back to Canary app and start it. It will grab the link for you.
5. Please share the link and your model number here!
As for how to sideload the update.zip file, I have explained it step-by-step here:
ADB Method:
1. Download and install adb.
2. Connect your phone to your PC.
3. Download the update file where you have installed adb Platform Tools.
4. Rename the file (including the extension) to "update.zip". Click "Yes" on the prompt.
5. Open your terminal of choice.
6. Type "adb reboot recovery" and press ENTER on your keyboard. Wait for your phone to reboot to recovery mode.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via ADB".
8. Back to the terminal on your PC type "adb sideload update.zip". (NOTE: If it says that device is not connected, just remove and put the USB cable back until it works).
9. The update is being installed. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
SD Card Method:
1. Search for an update file. You can usually find one in XDA Forums.
2. Check if you have the right build and open the right link.
3. Download the update file (.bin extension).
4. Move the update file to your SD Card. (NOTE: If you are getting errors, back up the stuff of your SD Card and format it from your Galaxy phone.)
5. Rename the .bin file (including the extension) to "update.zip". Click "Change" on the prompt.
6. Reboot to Recovery Mode, by connecting your phone to another device (such as your earphones) and holding the Volume Up + Power (+ Bixby) buttons.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via SD Card".
8. Navigate to and select "update.zip".
9. The update will start installing. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
Thank you for your support and I hope I helped you!

I don't think it has been released anywhere except Korea, it's not even showing in Samsung Members for us lol.. Misleading title...

megaghostgamer said:
I don't think it has been released anywhere except Korea, it's not even showing in Samsung Members for us lol.. Misleading title...
Click to expand...
Click to collapse
Sorry about that. I updated the title!

Update the stable updates out in Germany

cooldude20000 said:
Update the stable updates out in Germany
Click to expand...
Click to collapse
Thank you for the information! I updated the main post.

Hi I have the Korean Variant KT can I just use KOO variant to flash it

[RECOVERY][UNOFFICIAL] TWRP for SM-p205 (Tab A 8.0 2019 Exynos model)

Flash at your own Risk !!!
Tested Working:
Flash gsi roms
How to Flash:
1. Reboot Device to Downloadmode
2. Unlock Bootloader
3. Install adb and Fastboot driver and Device Drivers ( Google will Help )
4. Download the VBMeta-disabled.tar and the twrp-3.6.0_9-0-p205.tar and the multidisable script
5. Download Odin3 from Attachments and start Odin on PC
6. In Odin Press on Options and untick Auto Reboot
7. Flash VBMeta-disabled.tar with Odin ( In Odin click on AP - select the vbmeta-disabled.tar and press start )
8. After flash vbmeta without errors press on AP and select twrp-3.6.0_9-0-p205.tar and press on start
9. If all is Flashed without errors longpress power and vol- on device
10. instantly after device goes Blackscreen press and hold power and vol+ for 5-8 seconds to boot to TWRP
11.Click Wipe in twrp ,
12.Click Advanced Wipe
13.Select the Data checkbox
14.Click Repair of Change File System
15.Click Change File System
16.Click Ext4
17.Swipt to change(Warn !!! that will wipe your data)
18.Cilck Black
19.Go back TWRP maim screen
11.Copy the multidisable script to the device
12. Run multidisabler script on TWRP via adb or TWRP TermInal
13. Reboot
The TWRP file:
Twrp_sm-p205 - Google Drive
drive.google.com

Deleted

NOTE : the twrp isn't made by me i found it at
Pledge for TWRP for Tab A with S-pen (SM-P205)?
Hi! I am relativelly new at XDA. I think i read somewhere that pledging cash for help to get a certain thing done is allowed but am a bit unsure. So excuse me if this post is perhaps slightly against the rules or so. Moderators can of course in...
forum.xda-developers.com

s10 galaxy g973f no boot after flash magisk patched firmware

Ieudhd

i donloaded diud

Hello Sams10, did you make the bootloader before or not as explained in the tutorial.
You said your flasher with odin more detail would be welcome, how did you do there according to your comment your flashed directly in download mode without having done the manipulation for the bootloader and then did what.

bootloader unlocked and kg checking

every instructions for s10 is outdated including the lineage os website and youtube i have checked all

heimdalll latest 1.4.2 doesnt work with samsung s10.

19.9.2022 on latest android firmware new zealand firmware custom rom doesnt work , only europe and americas will work

Hello Sams10, already a little politeness because I said hello to you, you post 4 times without saying hello.
I don't understand the unlock bootloader ok then S10 is good s10 exynos or 5 G, I followed John Wu's tutorial as explained in the magisk thread on this forum no problem.
You have well modified in magisk AP of the official rom then trafer on your pc with adb pull then odin 3.14.4 flash the 4 files BL-AP patched-CP Home CSC.

g973F exynos, not 5g, u must be americas europe firmware , vodafone nz firmware probably doesnt work

this is my current download mode
my screen is cracked thats the purple lines and dead pixel on top left

Not work

Hello Sams10, you start in dowload mode you flash with odin 3.14.4 the official firmware the one mark in my signature me AUT or XEF lash the 4 BL-AP-CP-CSC files it will restart as on the first day. Then install magisk 25.2 you transfer AP on your S10, you modify with magisk you will have a file in internal memory in dowload magisk_patchedxxxx.tar you transfer it with ADB on the pc which in adb must give this adb pull /sdcard/Download/magisk_patched-25200_G3e9K.tar
once transferred ok you put yourself in dowload mode and you put the file BL -AP patched -CP -home CSC you start you let it restart and you open magisk to activate zygisk then you install the modules you will find here https://forum .xda-developers.com/t/discussion-magisk-the-age-of-zygisk.4393877/
instalation look here from john Wu https://topjohnwu.github.io/Magisk/install.html
read the instruction part, then when you have finished and root I will send you the file to remove the warning message at start-up ok

I use ap magisk patched and CSC , not home CSC when I flashed and had boot loop

Does it have to be an adb pull for the patched firmware from Android , I just use file transfer on windows to transfer the magisk patched ap file from the s10 to the windows

Try with home CSC as john wu says you have to do adb from s10 to pc with adb windows not send all.

Start the installation, and copy the patched tar file to your PC using ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].tar
DO NOT USE MTP as it is known to corrupt large files.

John Wu says CSC not home csc because he want to erase firmware data

Hello Sams10, yes you made a backup of your data before with smart switch or others. For me it worked if you follow the present tutorial look on my tutorial
1- The bootloader follow explanation Use vol down + vol up + USB cable plugged into a PC to boot the phone into download mode;
Long press vol up then confirm that you want to unlock the bootloader (this is only needed once);
* Please note that all your data will be erased, including internal memory, and the phone will restart!!
5- Let the phone start normally, go through the configuration and connect to the Internet (wireless or mobile data) in order to unlock
6- Make sure OEM Unlock is enabled in Developer Settings.
2- Once reboot install magisk 25.2 APK.
3- Download the official firmware on Samobile.com or frija you will find this on the forum.
4- Transfer the official firmware AP to the smartphone.
5- Open magisk recovery mode choose corrective mode choose the AP download press "let's go."
6- Once the modification is finished in the root directory, download a patched_magiskxxxx.img.tar file if found.
7- Transfer it with adb pull like this adb pull /sdcard/Download/patched_patched.magiskxxxx.img[.tar] you can rename it "patched_magisk.img.tar"
8- Put your smartphone in download mode Use vol down + vol up + usb cable connected to a PC to start the phone in download mode, briefly press vol up to
confirm that you want to enter download mode;
9- Open Odin latest version placed 4 files following BL-AP magisk patched.img.tar-CP-home CSC leaves auto start checked in odin option.
10- It will restart open magisk activated Zygisk restart install safetynet modules - shamiko-hidemagisk prop config-busybox nk-lposed see on this page https://forum.xda-developers.com/t/discussion-magisk-the-age -of-zygisk.4393877/
message #3-#6 to #9.
11- Install foxmagiskmodulemanager the catalog of modules for magisk here https://github.com/Fox2Code/FoxMagiskModuleManager/releases
12- Once rooted the security message for the removed open Odin place UP-param.tar in AP and flashed. See attached file
Up_param.tar download link on my mega here to know for S10 exynos for S10e- S10+ versions see 5G I don't know if it works.

Is this normal I have to wait about 30 minutes after power off to try get into download mode??

Maybe something is broken the phone like doesn't turn off properly or something, have to wait sometimes one hour