Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we are now based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
If there are any bugs, either we will sort them out or the GZOSP team, if it concerns their code base. This ROM isn't GZOSP supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 14.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 28.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure might vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
The root solution can be flashed together with every OTA update (= ROM Update).
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually require to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time.
Unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
To be able to flash using the built-in OTA app, TWRP recovery is needed.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_msm8998
Device tree source:
https://github.com/AICP/device_xiaomi_sagit
Vendor source:
https://github.com/AICP/proprietary_vendor_xiaomi
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
[ROM][OFFICIAL] AICP - 14.0 - P 9.0 sagit - WEEKLY, ROM for the Xiaomi Mi 6
Contributors
Miccia
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 9.3.7
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 9.0
Stable Release Date: 2019-03-21
Created 2017-12-16
Last Updated 2019-03-21
Frequently asked Questions
Which firmware should i use?
You have to use an firmware older then 8.10.25 but at least 8.4.19. Download the 8.4.19 firmware here: https://basketbuild.com/filedl/devs...agit_miui_MI6Global_8.4.19_49003fef39_8.0.zip
Click to expand...
Click to collapse
Which recovery should i use?
You should use this TWRP: https://androidfilehost.com/?fid=6006931924117891801 because the official one is not up to date with this ROM and can't decrypt your data.
Click to expand...
Click to collapse
The Rom doesn't let me add new fingerprints. What is the reason?
You have to use an firmware older then 9.3.21 but at least 8.4.19 because Xiaomi has updated some pathes for the fingerprint data.
Click to expand...
Click to collapse
Thanks, I quite enjoyed aicp on my Mi 4c
Wow, great news. Thanks!
Nice and stable ROM, can you built-in camera2 api HAL3 like shamu?
Big thanks @Miccia
Almost a day with this ROM and don't have any problems. Great work. :good:
Finally. Any chance to port call recording to this rom? How about VoLTE?
Thank you very mich for your work. Will try it later.
Great work
Maybe i missed it but how about credit to Cozzmy13 and xiaobai112220 for the great effort they made so far?
DocRambone said:
Maybe i missed it but how about credit to Cozzmy13 and xiaobai112220 for the great effort they made so far?
Click to expand...
Click to collapse
I'm both an AICP and a Lineage member, and both teams have been mentioned, that's enough credits for me.
Great news, that I'm waiting for.
Thanks.
Critical bug, stuck charge at 90%
otg pendrive doesn't work. it's decribed as need to be fixed but even after format from AICP it still not works
on lineageos lineage-14.1-20171130 from Cozzmy13 it's working
logs attached,thanks
log
fahmi182 said:
Critical bug, stuck charge at 90%
Click to expand...
Click to collapse
100% here
Miccia said:
100% here
Click to expand...
Click to collapse
I think because of this, powerhal bug
fahmi182 said:
I think because of this, powerhal bug
Click to expand...
Click to collapse
Common errors for caf hals, i have the same in my logcat
Miccia said:
Common errors for caf hals, i have the same in my logcat
Click to expand...
Click to collapse
Many users have some bug like me, cant charge, stuck at 90%+
https://plus.google.com/112791584407536662842/posts/D9MjVdBpKPX Here is my bug report about AudioFX. Have you noticed it?
---------- Post added at 11:54 AM ---------- Previous post was at 11:52 AM ----------
fahmi182 said:
Many users have some bug like me, cant charge, stuck at 90%+
Click to expand...
Click to collapse
Yeah I had it too exactly at 90percent. Re-plugging solved the issue.
oliver_jang said:
https://plus.google.com/112791584407536662842/posts/D9MjVdBpKPX Here is my bug report about AudioFX. Have you noticed it?
---------- Post added at 11:54 AM ---------- Previous post was at 11:52 AM ----------
Yeah I had it too exactly at 90percent. Re-plugging solved the issue.
Click to expand...
Click to collapse
We are tracking audiofx from Lineageos
Hello, thank for your ROM, but in this ROM I have common bug of custom ROM with hotspot. Hotspot does not share internet connection. In the other ROM I fixed it with custom Kernel like Hasty and Popkern. Can you fix it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Lineage OS:
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Warning:
This ROM will not work on devices that have not installed the O bootloader and appropriate modem package below. Also does any build from now on require a vendor partition, by doing this you will lose the ability to flash official builds provided by ZTE. Any failure in this process of flashing or repartitioning could lead to an unrecoverable bricked device.
What's not working:
SELinux is permissive
Instructions:
Attention! The bootloader needs to be unlocked!
Attention! You'll need a vendor partition!
1. Install the Universal bootloader and your model specific modem. Download
2. Flash vendor creation tool. Download (unnecessary, if done already)
* On first flash the device will reboot, just reboot to recovery and reflash the zip.
3. Update your version of TWRP. Download
4. Perform a backup of your current ROM. (optional)
5. Wipe system,data and cache (optional) [Needed if coming from another rom!; always good to avoid bugs]
6. Install the ROM. Download
7. Install GApps. (optional) [Recommended -> Open GApps (arm64) (9.0)]
8. Reboot.
What is CAF?
Code Aurora, a Linux Foundation Collaborative Project, hosts tested open source software code needed to provide upstream enablement for innovative, performance optimized, network connectivity and related ecosystems to support system on a chip (SoC) products. It also serves as a staging area for open source code that is submitted to various upstream projects such as the Linux kernel and Android. CAF also mirrors key upstream projects for use by the community.
Sources, Changes, & Wiki:
Source | Changes | Axon 7 Wiki | Lineage OS
Credits:
@Unjustified Dev
@DrakenFX
XDA:DevDB Information
[UNOFFICIAL] LineageOS 16.0 for ZTE Axon 7, ROM for the ZTE Axon 7
Contributors
OrdenKrieger, Unjustified Dev
Source Code: https://github.com/OrdenKrieger/android_kernel_zte_msm8996
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: O bootloader + region modem
Based On: LineageOS
Version Information
Status: Testing
Created 2018-08-19
Last Updated 2019-07-28
Some features of LineageOS are missing, but they will be merged in future builds.
Some features may or may not work, sometimes also differently. Feel free to ask
any question.
UwU neat p finally
Nice.But its unclear for me...is gapps inbuild android 9 or we still need gappas package? And we can also use b12 0 bootstack from Nfound,correct?
Predatorhaze said:
Nice.But its unclear for me...is gapps inbuild android 9 or we still need gappas package? And we can also use b12 0 bootstack from Nfound,correct?
Click to expand...
Click to collapse
Read the instructions, they are there for a reason.
OrdenKrieger said:
Read the instructions, they are there for a reason.
Click to expand...
Click to collapse
Los 15 is abandoned I assume?
And 16 besides nfc and volte is functional?
Thanks for contributing.
wow. It is all happening very fast.
Thanks
OrdenKrieger said:
Read the instructions, they are there for a reason.
Click to expand...
Click to collapse
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important
Predatorhaze said:
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important.You also say its optional to wipe system data cache if come from other rom,but in fact its REQUIRED to wipe system data if you come from other rom
Click to expand...
Click to collapse
GApps is always optional because some people want them and some don't. If you read carefully, on LOS 15.1 is the same.
I have heard Android Pie got GAPPS inbuild and i believe that because google dont want microg users.So its not true...
Predatorhaze said:
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important
Click to expand...
Click to collapse
Why should I mention other stuff if I already provide a working bootstack. Why would I give a download link for Gapps and add the the optionally tag, if they would be build in.
thnx @OrdenKrieger and all others involved :good:
Nice build - working smooth, no lag
DT2W ok
Used bitgapps as a starter
At last NO echo and incall volume adjustable
FP working
Hotspot OK
camera pics ok, recording crashes when saving - on both pics and video lag on movement
usb preferences work
afaik there is no way in settings to reverse softkeys so i used mine : https://androidfilehost.com/?fid=3700668719832237510 (be sure to be rooted and mount system/vendor)
Notifications work - on lockscreen and leds ok
EDIT : after testing a bit, definitely more heating and i mean a lot, more cpu load (f.e. as on the PPR1 img )..... could not stabilize temp on cpu 92C ! Only after applying powersave in EXKM...definitely something to look into (only Wifi on, no BT, no specific apps running....only the basic stuff to test your build )
EDIT2 : fast charging way more heat on battery - also battery drain too fast even with no cpu load
Will test further
Has anyone tried recording a video using the camera on a clean flash? Does the camera app freeze or crash?
2000impreza said:
Has anyone tried recording a video using the camera on a clean flash? Does the camera app freeze or crash?
Click to expand...
Click to collapse
yep, tried recording now and crashes when saving. Also lag on movement.
I try to flash but brick.
I download the bootloader and modem and Twrp and install them.
TWRP from OP did not see vendor Partition.
After flashing the Rom, no Twrp booting, no System booting...just fastboot working.
Hellsbend said:
I try to flash but brick.
I download the bootloader and modem and Twrp and install them.
TWRP from OP did not see vendor Partition.
After flashing the Rom, no Twrp booting, no System booting...just fastboot working.
Click to expand...
Click to collapse
So, the OP says "FOR NOW THIS BUILD ONLY WORKS ON DEVICES WITH A VENDOR Partition". Did your device have a vendor partition before flashing this one?
ttkian said:
So, the OP says "FOR NOW THIS BUILD ONLY WORKS ON DEVICES WITH A VENDOR Partition". Did your device have a vendor partition before flashing this one?
Click to expand...
Click to collapse
Yes of course, I was running ray steffs LineageOS 16 Treble bevor
Hellsbend said:
Yes of course, I was running ray steffs LineageOS 16 Treble bevor
Click to expand...
Click to collapse
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.
raystef66 said:
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.
Click to expand...
Click to collapse
Thank you very much, I am on the other LineageOS again.
Flashing Nfounds Twrp through fastboot, than O Bootstack again and I could restore my backup
Maybe they should point on that in the OP here.
I will try again in a minute and report back.
Thank you again!
---------- Post added at 07:26 PM ---------- Previous post was at 06:35 PM ----------
raystef66 said:
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.
Click to expand...
Click to collapse
That work's just fine.
I just tried this new build now, but it's just the same as the build you posted earlier today.
The only difference in this build....
Device information now shows Axon7 U
Same small bugs as in the other LineageOS 16 GSI plus wifi bit bugy
Signature spoofing is broken
Not worth it jet setting it up all new again.
I went back to my backup again.
Thank you again.
Edit
Of course, it's easier to flash because Post 1,2 and 3 are "included" now.
So it's quicker to flash.
Hellsbend said:
Thank you very much, I am on the other LineageOS again.
Flashing Nfounds Twrp through fastboot, than O Bootstack again and I could restore my backup
Maybe they should point on that in the OP here.
I will try again in a minute and report back.
Thank you again!
---------- Post added at 07:26 PM ---------- Previous post was at 06:35 PM ----------
That work's just fine.
I just tried this new build now, but it's just the same as the build you posted earlier today.
The only difference in this build....
Device information now shows Axon7 U
Same small bugs as in the other LineageOS 16 GSI plus wifi bit bugy
Signature spoofing is broken
Not worth it jet setting it up all new again.
I went back to my backup again.
Thank you again.
Click to expand...
Click to collapse
Not quite. Mine was derived from Redmi Note 4. It looks the same for sure but devs have done some adjustments as to ECHO, dt2w working, notifications, ....
BUT my LOS16 build had no heating, nice CPU load and no battery drain and no heating when charging at all but had the annoying echo as we know it on other gsi builds and no dt2w, no notifications working on lockscreen, no led...
So there are definitely pros from this build and pros from mine.
Hope they can manage heating.
Also back on AEX as the heating (in my case) was too heavy. Dont want to ruin anything now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
Latest Opengapps nano ARM64
https://opengapps.org
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_sdm660
Device tree source:
https://github.com/AICP/device_xiaomi_wayne
Vendor source:
https://github.com/AICP/proprietary_vendor_xiaomi
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@Nebrassy
@rcstar6696
@coderzs
ROM OS Version: 10.0.x
Kernel: Linux 4.4
Version Information:
Status: WEEKLY
Release Date: 03-06-2020
You want to see a "normal" night at the "DEV office", click here!!
R Nightly:
https://www.androidfilehost.com/?w=files&flid=318478
Download:
https://dwnld.aicp-rom.com/
Telegram (memes ahead):
https://t.me/NSSFB
AICP Announcement channel:
https://t.me/aicprom
AICP Splash images
https://www.androidfilehost.com/?w=files&flid=300685
TWRP:
https://mega.nz/#!zZBjUIQL!skoSxdQSCKMe0xwBCOcN0BIWS2jHePJYJDFaOawLehE
flashing instructions:
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
Default theme is light with no transparency
Default accent is AOSP green
All customizable
Screenshots (from A2) :
mine
Nice work, but..
june 2018?
atiprusma said:
Nice work, but..
june 2018?
Click to expand...
Click to collapse
that's because of my SafetyNet module, also that's the vendor security patch, not the build security patch
it includes march security patch
Nebrassy said:
that's because of my SafetyNet module, also that's the vendor security patch, not the build security patch
it includes march security patch
Click to expand...
Click to collapse
Fantastic rom ... for the rom to start in my A2 converted to 6X, after installing the gapps, I had to install the Hex-v167-Wayne kernel ... then magisk and everything OK
Thanks and regards
Nebrassy said:
that's because of my SafetyNet module, also that's the vendor security patch, not the build security patch
it includes march security patch
Click to expand...
Click to collapse
i see.
keep the good work dude!
Official builds at https://dwnld.aicp-rom.com/
weekly builds from now on
first Official release
April security patch
Enforced Selinux
rebased kernel thanks to @rcstar6696
fixes dt2w on Pie base
fixes FP gestures
fixes screen bleeding issues
fixed some visual bugs
Clean flash is required, you will run into issues if you dirty flash
report any problems you have, don't bother reporting without logs
the boot animation tho... nice joke lmao :d
Raegwynn said:
the boot animation tho... nice joke lmao :d
Click to expand...
Click to collapse
Yes, boot animation was my reason to stop testing and install other SW.
StannerG said:
Yes, boot animation was my reason to stop testing and install other SW.
Click to expand...
Click to collapse
You know you can change it in aicp extras right?
Nebrassy said:
You know you can change it in aicp extras right?
Click to expand...
Click to collapse
Yes, but i think - need make default bootanimation more neutral
StannerG said:
Yes, but i think - need make default bootanimation more neutral
Click to expand...
Click to collapse
Yeah, that was for April fools, next build will have the regular one
* Sorry, posted to the wrong thread
New builds should be up in a few minutes
Netflix might be fixed, test and report with logs
I have to feed back a bug: Many applications can't download the local data needed to run it. For example, Google Translate, Google Translate can't download offline translation files on this ROM, I hope you can fix it. In addition, the localization of this ROM is incomplete, I hope this can be improved. Thank you for your work.
---------- Post added at 06:12 PM ---------- Previous post was at 05:53 PM ----------
I found that the default browser using this ROM could not successfully download any files. No other browser except the Chrome browser can successfully download the file. Even if you confirm the download, the file will not be downloaded to your phone.
clrolee said:
I have to feed back a bug: Many applications can't download the local data needed to run it. For example, Google Translate, Google Translate can't download offline translation files on this ROM, I hope you can fix it. In addition, the localization of this ROM is incomplete, I hope this can be improved. Thank you for your work.
---------- Post added at 06:12 PM ---------- Previous post was at 05:53 PM ----------
I found that the default browser using this ROM could not successfully download any files. No other browser except the Chrome browser can successfully download the file. Even if you confirm the download, the file will not be downloaded to your phone.
Click to expand...
Click to collapse
^^
Nebrassy said:
report any problems you have, don't bother reporting without logs
Click to expand...
Click to collapse
In addition, I also found that on aicp, when you are typing, the input method will suddenly exit.
---------- Post added at 02:24 AM ---------- Previous post was at 02:22 AM ----------
Nebrassy said:
^^
Click to expand...
Click to collapse
OK, I don't know how to catch the log, but I will get to know. I hope you can wait. thank you.
---------- Post added at 02:42 AM ---------- Previous post was at 02:24 AM ----------
Nebrassy said:
^^
Click to expand...
Click to collapse
I tried to solve the problem that I could not successfully download, I used the adb command. The reason why I succeeded was because Google in my country was blocked by the government, so the results of the captive test were not normal. I fixed it with adb. The previous problem may be due to the system thinking that I am not connected to the network.
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][CENTER]**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****[/CENTER][/B]
Android Open Source illusion Project
About us:AOSIP is a quality custom ROM based purely on AOSP. Twisted with the latest features and blended with stability. We strive for perfection and it shows.
Team Illusion:
Josh Fox (xlxfoxxlx)
Akhil Narang
Harsh Shandilya
Anirudh Gupta
Source code:
AOSiP Gerrit Review
AOSiP Github
Kernel Source
Latest Downloads:
ROM:
Official Server | SourceForge Mirror
Credit/Thanks:
Mike Williams (founder and creator of AOSiP)
Google for Android and AOSP
LineageOS
ABC ROM
AquariOS
BootleggersROM
Dirty Unicorns
PixelExperience
OmniROM
CarbonROM
nathanchance
---------
Other projects whose work helped us to create this
And last but not the least, all our testers, who have helped us to squash many bugs so that we can try to release builds that as are flawless as possible
Hosted and built on
XDA:DevDB Information
Android Open Source Illusion Project, ROM for the OnePlus 6
Contributors
anirudhgupta109
Source Code: https://www.github.com/AOSiP
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS 10.3.0
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-05-06
Created 2019-09-21
Last Updated 2020-05-06
INSTALLATION PROCEDURE:
MAKE SURE YOU'RE ON THE LATEST STABLE OOS 10 FIRMWARE FROM HERE (at the time of this edit, its 10.3.0)
DO NOT EVER WIPE SYSTEM OR VENDOR ON THE OP6!!!!!
1. If you're coming from another ROM or need to perform a clean flash:
Boot into TWRP
MAKE SURE YOU'RE USING ONLY mauronofrio TWRP: IMAGE | ZIP INSTALLER
Flash OOS in TWRP
Flash TWRP Installer
Reboot to recovery
Flash OOS in TWRP again to make sure its on both slots
Flash TWRP Installer
Reboot to recovery
Flash ROM (link in first post)
Flash TWRP Installer
Wipe Data and Cache
Reboot to Recovery
Flash any mods (optional) (I won't be supporting Custom Kernels or Xposed)
Flash ONLY the latest Magisk (optional)
Enjoy
2. If you're updating the ROM:
a. Via the inbuilt Updater
When you get a notification of new build available, tap it
Tap Download
Wait for Download
Tap the three dots>preferences>enable "Install updates faster"
Tap install
Wait for install
Tap reboot
Enjoy!!
b. via TWRP
Flash Substratum rescue zip if you have a theme applied
Flash ROM
Flash TWRP Installer
Reboot to recovery
Flash mods (optional)
Flash Magisk (optional)
Reboot
Enjoy
NOTE: If you have issues with Settings or Play Services force-closes you need to clean flash (Method 1).
KNOWN ISSUES:
None noteworthy
Reserved
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Include your OOS base versions in reports. (Eg: 9.0.8, OB25, 9.0.7, etc.)
Mention any and all Magisk modules you might be using along with the Magisk version
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
FREQUENTLY ASKED QUESTIONS:
Q: Which TWRP do I use?
A: Use only latest mauronofrio TWRP: IMAGE | ZIP INSTALLER
Q: Which GApps do I use?
A: Use the "Gapps" variant builds if you need Gapps. They have Gapps preincluded and provide the best Gapps experience.
Q: Do I have to wipe data if coming from another ROM?
A: Yes, I will not be providing help/support to users that haven't wiped data when coming from another ROM.
Q: How often will I be getting updates?
A: The plan is for weeklies, if unavoidable circumstances come up, please don't spam the thread. I will release a build as soon as one is ready.
Q: Does VoLTE/VoWiFi work?
A: Yes, I have tested on Jio in India and it does work. VoWiFi seems to be broken based on the 2 reports I've had, I can't test this personally since India doesn't have this feature.
Q: I ended up on CrashDump mode, how do I get back to my system?
A: Theres a valuable thread HERE which can help restoring your system, you WILL LOSE ALL DATA and I will not be blamed under any circumstances.
Q: Is the ROM official?
A: The ROM is Official.
Q: I use Telegram, where can I find help on that platform?
A: There is a common AOSiP Group Chat for all devices, the link is HERE
Q: Does SafteyNet pass and is the SELinux Enforcing?
A: Yes, SafteyNet does pass with Magisk and SELinux is Enforcing.
Q: What OOS Base firmware do I use?
A: OOS OB25 is the recommended base firmware right now.
Q: I'm having high idle drain, please fix.
A: I'll need more data from you to figure it out, Install BetterBatteryStats and let me know about what it tells you after 3-4 charge cycles. Please do not report issues when having apps like Greenify, Naptime, Wakelock blocker etc.
Q: My phone is stuck on the "Bootloader is unlocked" warning page, why isn't my system booting?
A: Since there are a bunch of scripts being executed when the device is sent a power on signal, it might take some time to boot. Don't panic, your system will boot fine after some time. All builds are personally tested by me and a few testers.
Q: When I'm updating via OTA in the Updater, do I have to reflash GApps and Magisk? Will TWRP stay after I update?
A: When updating via OTA, GApps and Magisk will remain intact. Have a look in /system/addon.d/. Anything that is present inside that folder will stay after the update.
TWRP will not stay since A/B devices don't have a recovery partition for it to actually stay. You will be reverted to the stock recovery.
Reserved 4
When someone tests please post screenshots
Oh great yes. I will test this today or tomorrow.
Thanks. Can't wait to try. Aosip is the best ?
Great job
Deleted
My OnePlus 6 is now my backup phone so I better learn how to take logs so I can help because I can flash anything it doesn't matter if I brick it lol preferably just a soft brick though Thank you I really like aosip it's a great pie ROM. It was my daily driver. I tried just about every other rom but they weren't even close to how nice and polished and stable aosip is
Yeah, this rom works wonders for me. The only 'issue' I have is the signal strength, but it's more a cosmic thing right?
If we're already on AOSiP 9.0, do we have to clean flash or can we dirty flash? Sorry for noob question.
Please excuse my strong words but this is fu**ing amazing.
Using LOS17 for a few days, i was pretty happy, but this is on another level, this is faster, more polished, seems very stable, and all this in a first build, i'm really blown away to be honest.
Nothing to complain about, all the things i had problems with on LOS are not present here (Most importantly, video issues with GCam and Digital Wellbeing crashing).
Totone56 said:
Please excuse my strong words but this is fu**ing amazing.
Using LOS17 for a few days, i was pretty happy, but this is on another level, this is faster, more polished, seems very stable, and all this in a first build, i'm really blown away to be honest.
Nothing to complain about, all the things i had problems with on LOS are not present here (Most importantly, video issues with GCam and Digital Wellbeing crashing).
Click to expand...
Click to collapse
I subscribe 100%. Lads, this is amazing work on such short notice sort of speak. I am someone who tried all roms for my OP6 and I mean ALL OF THEM, 20-30 times over. Illusion is the only one maturely stable no issues whatsoever. And today I flashed Q. It is crazy fast, moves slick as a fox, stable so far, all it's missing is the customizations but that's to come, no worries, very much understandable, it's an alpha. I have tried DP3 from OP back when they released... disaster. I have no words for your work, literally speechless.
Lads, you're severe geniuses.
First post suggests to use beta 25 as the base. For good reasons I imagine.
erad1 said:
First post suggests to use beta 25 as the base. For good reasons I imagine.
Click to expand...
Click to collapse
The link takes you to ob28 ?
shakad said:
The link takes you to ob28 ?
Click to expand...
Click to collapse
OnePlus mistype OB25 to OB28, but it's still same OB25. Also, this is not first time OnePlus typo on their OOS name. :laugh:
Oh Boi..
Here we go.. XD
Let Android 10 ROM's rain like hell.. XD
Yup, it's a real signal strength. Most roms fake it to avoid dealing with this issue.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
NikGapps or OpenGapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_sdm660
Device tree source:
https://github.com/AICP/device_xiaomi_lavender
Vendor source:
https://github.com/AICP/proprietary_vendor_xiaomi
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
Android Ice Cold Project, ROM for the Xiaomi Redmi Note 7
Contributors
Nebrassy, semdoc, wartomato, rcstar6696, renascape
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-06-03
Created 2020-05-18
Last Updated 2020-10-19
Reserved
R Nightly download:
https://www.androidfilehost.com/?w=files&flid=318676
Download:
https://dwnld.aicp-rom.com/
Telegram (memes ahead):
https://t.me/NSSFB
AICP Announcement channel:
https://t.me/aicprom
Reserved
Gcam fix:
https://www.androidfilehost.com/?w=files&flid=318702
good aicp , thanks
One of the best ROMs out there with great devs. I hope it will be good maintained. Gonna give it a try after some days.
I tried it yesterday and love AICP but the camera world crash using HDR and I couldn't find a gcam that worked right.
jmoss1972 said:
I tried it yesterday and love AICP but the camera world crash using HDR and I couldn't find a gcam that worked right.
Click to expand...
Click to collapse
Try this
https://www.celsoazevedo.com/files/android/google-camera/dev-the_dise/
Tried the gcam, it crashes too, I'll keep looking for a gcam that works.
jmoss1972 said:
Tried the gcam, it crashes too, I'll keep looking for a gcam that works.
Click to expand...
Click to collapse
Try TrCamera.V5 or Bruial 7.2.10. If not working change the kernel. Iam on AICP Q unofficial from April, this cameras works great.
Great, good job now official. AICP my favourite rom. EAS is still supported? The unofficial roms before have a very good BB with some EAS kernels. Iam not a gamer and don't found a good HMP with very good BB for AICP Q.
Rangdrol said:
Try TrCamera.V5 or Bruial 7.2.10. If not working change the kernel. Iam on AICP Q unofficial from April, this cameras works great.
---------- Post added at 09:27 AM ---------- Previous post was at 09:24 AM ----------
Great, good job now official. AICP my favourite rom. EAS is still supported? The unofficial roms before have a very good BB with some EAS kernels. Iam not a gamer and don't found a good HMP with very good BB for AICP Q.
Click to expand...
Click to collapse
Was using eas before, while it does improve smoothness and UI performance, it unfortunately causes some really nasty freezes, so I swit he'd back to HMP, you're free to use a custom kernel though
Nebrassy said:
Was using eas before, while it does improve smoothness and UI performance, it unfortunately causes some really nasty freezes, so I swit he'd back to HMP, you're free to use a custom kernel though
Click to expand...
Click to collapse
This good to hear, I will try. With OLK-reloaded-V5, Papermoon 3.7 and Notkernel EAS I never had freezes with AICP Q in daily use (5weeks) and very good BB. Papermoon no. 1 smooth, than OLK. But I never tried games.
Hey. I have a headset problem. The volume change on the headphones does not work.. when I press the button, the volume goes up or down. does anyone have the same?
xander21 said:
Hey. I have a headset problem. The volume change on the headphones does not work.. when I press the button, the volume goes up or down. does anyone have the same?
Click to expand...
Click to collapse
I use headphone with volume control and both work. The volume control of the headphone and volume control of the smartphone. Driver from ViperFx. But I am still on aicp_lavender_q-15.0-UNOFFICIAL-20200412. Tomorrow I want update to the official one, after testing SyberiaOS. But I don't think they change the sound control in the official one.
Rangdrol said:
I use headphone with volume control and both work. The volume control of the headphone and volume control of the smartphone. Driver from ViperFx. But I am still on aicp_lavender_q-15.0-UNOFFICIAL-20200412. Tomorrow I want update to the official one, after testing SyberiaOS. But I don't think they change the sound control in the official one.
Click to expand...
Click to collapse
In lineageos there is also a problem with the volume of the headphones. It's probably a kernel bug. Mokee rom and Pixel experience is ok. they have a different kernel, so they work Hmmm....
xander21 said:
In lineageos there is also a problem with the volume of the headphones. It's probably a kernel bug. Mokee rom and Pixel experience is ok. they have a different kernel, so they work Hmmm....
Click to expand...
Click to collapse
For me it works fine. I have AUDICTUS ADRENALINE 2.0, before install AICP I flashed global rom via fastboot.
---------- Post added at 06:49 PM ---------- Previous post was at 06:34 PM ----------
Where can I find FM radio app?
Really good rom, you know how to do for smali patcher work on your rom? In other roms work
Hi guys, does anyone know how the battery goes? And how is the camera doing?
Thanks.
KackBarton said:
Hi guys, does anyone know how the battery goes? And how is the camera doing?
Thanks.
Click to expand...
Click to collapse
BB is good, but depends what kernel you use. You can change kernel and have 1-2 hours more. Cameras I installed TrCamera V5 and Hypercam (gcams) both works great.
Rangdrol said:
BB is good, but depends what kernel you use. You can change kernel and have 1-2 hours more. Cameras I installed TrCamera V5 and Hypercam (gcams) both works great.
Click to expand...
Click to collapse
Thanks bro.
lheredia1987 said:
Really good rom, you know how to do for smali patcher work on your rom? In other roms work
Click to expand...
Click to collapse
Try one more time all good now, love this rom