I use face unlock including the setting Direct Unlock and Raise to Wake. I don't know what I just did but now every time i lift the phone to unlock it I get 'Smart Unlock successful. Slide up to open.' It didn't do that until an hour ago. It used to go straight to the last screen I was using. Searched everywhere but cannot see what I did that changed it. I am on the Beta but I don't think that makes a difference. Any ideas?
TIA
In the end I did a reset of settings and also wiped the cache in recovery and that seems to have got it back to normal. Unfortunately, meant I had to redo all my settings again.
I have the same problem, it's very annoying any better solutions then reset...??
seweq said:
I have the same problem, it's very annoying any better solutions then reset...??
Click to expand...
Click to collapse
Just to be clear - it wasn't a full factory reset, just a reset of Settings. So no apps or data was lost.
guyz google bringing always something new.. they made new feature dat they know u ar at home and they gve u option to enable smart unlock so bylocation google knows u at home so u taped ok and u enabled smart unlock u prbobaly didn't even realised what was it u just tapped yes ...
so when u at home phone is already unlocked...
Hiw to remove Smart Lock
Go to Settings > Security & Privacy > Lock screen password > Smart Lock > turn off on body detection
Hope this helps
deeweee said:
Go to Settings > Security & Privacy > Lock screen password > Smart Lock > turn off on body detection
Hope this helps
Click to expand...
Click to collapse
There's no such option in honor 10
Please help
n-j-f said:
I use face unlock including the setting Direct Unlock and Raise to Wake. I don't know what I just did but now every time i lift the phone to unlock it I get 'Smart Unlock successful. Slide up to open.' It didn't do that until an hour ago. It used to go straight to the last screen I was using. Searched everywhere but cannot see what I did that changed it. I am on the Beta but I don't think that makes a difference. Any ideas?
TIA
Click to expand...
Click to collapse
I solve it... Please go to apps-Google play services-clear all data.
In my p30 works flawlessly
deeweee said:
Hiw to remove Smart Lock
Go to Settings > Security & Privacy > Lock screen password > Smart Lock > turn off on body detection
Hope this helps
Click to expand...
Click to collapse
That's what i did on my P30 pro and it worked! Thanks deewee
Related
Hi
on my Xperia Z when i set pattern for lockscreen the default mode lost!
now it directly goes to pattern to unlock the phone!
is it normal? or i should do sth else?
x102x96x said:
Hi
on my Xperia Z when i set pattern for lockscreen the default mode lost!
now it directly goes to pattern to unlock the phone!
is it normal? or i should do sth else?
Click to expand...
Click to collapse
Uhm let me see if I got this right:
For example you set face unlock, when you try to unlock the phone, the phone asks you for face unlock instead of the default unlock?
If that's the case, then yes. It's supposed to work that way.
Dsteppa said:
Uhm let me see if I got this right:
For example you set face unlock, when you try to unlock the phone, the phone asks you for face unlock instead of the default unlock?
If that's the case, then yes. It's supposed to work that way.
Click to expand...
Click to collapse
u now using x z and it happens to u?
yeah i set for example face-lock mode, then the default disabled! and then i cannot return to default mode cause disabled by credentials and
i should factory reset it.
that default lock mode is not important but i thought it might be a problem or mistake by me!
Got it!
it s about Credentials that disabled swipe mode (default)
I removed credentials and then swipe became enable.
as in if you "clear credentials" at the bottom of that menu the default swipe unlock will return? does face unlock remain too?
frankie99969 said:
as in if you "clear credentials" at the bottom of that menu the default swipe unlock will return? does face unlock remain too?
Click to expand...
Click to collapse
it s about the level of security (in my experience)
if u choose high level for example pattern then the low level security will disable.
after i cleared all credentials all kind of lock screen return but for example my vpn connections losts
after that when i set pattern again and create vpn connections now i don have swipe again.
it seems logical rather than a bug.
I have found many threads and discussions that show how to set up/activate smart lock, but I can't find it ANYwhere. It is not there. I have not yet set up fingerprint unlock as I want to know I can have smart lock option, and the fingerprint scanner on my Note 4 was so awful, I'm a little hesitant. Has anyone had this problem? I just updated software through Verizon today so now Samsung Pay is available, and wanted to use fingerprint with smart lock for security. Any help is greatly appreciated.
I just use the Search option and found. It's listed under Lock Screen and Security--- Secure Lock Settings
I'm on the international variant, but it should be on all Notes. Hope this helps.
Nope. Not there. But thanks.
It's exactly where LGmarly said it was. Which version of the phone do you have?
It will be there. I thought I did not have it either until I setup fingerprints. I use swipe pattern now & it's still there. If you have your lock screen set to swipe or nothing the Secure Lock Settings will not appear.
shouren04 said:
It will be there. I thought I did not have it either until I setup fingerprints. I use swipe pattern now & it's still there. If you have your lock screen set to swipe or nothing the Secure Lock Settings will not appear.
Click to expand...
Click to collapse
Thanks! That's what I was suspecting - not there until secure lock is set up. I searched high and low through all settings, sub-settings, etc. Will set up fingerprint today and expect to see it. Thanks for the replies.
I'm on Marshmallow and use SmartLock, so under the right conditions no unlock is required. However, at switch on there is nevertheless always still a screen to be swiped away (clock and emergency contact). Does anyone know a way of eliminating that stage, so that switch on goes directly to the desktop?
Thanks.
AidanBell said:
I'm on Marshmallow and use SmartLock, so under the right conditions no unlock is required. However, at switch on there is nevertheless always still a screen to be swiped away (clock and emergency contact). Does anyone know a way of eliminating that stage, so that switch on goes directly to the desktop?
Thanks.
Click to expand...
Click to collapse
Go to Settings --> Security --> Screen Lock --> Choose your desired Screen lock --> You should then see a screen like the following, select No Thanks and your device will still be locked but you won't have to enter your Screen Lock when starting the phone. I hope this helps!
alryder said:
Go to Settings --> Security --> Screen Lock --> Choose your desired Screen lock --> You should then see a screen like the following, select No Thanks and your device will still be locked but you won't have to enter your Screen Lock when starting the phone. I hope this helps!
Click to expand...
Click to collapse
Many thanks. I do already have that setting set to "No thanks", and indeed, when I switch on I do not have to put in my code. However, there is still always a screen (clock and emergency contact info) that has to be swiped away. It doesn't require a pin or patten, it just has to swiped away. And that's what I'm trying to get rid of.
Why would you want to get rid of a screen which will tell people how to contact you if you lose your phone...?
dahawthorne said:
Why would you want to get rid of a screen which will tell people how to contact you if you lose your phone...?
Click to expand...
Click to collapse
I'm only talking about when I'm at home and SmartLock is operational. If I lose my phone in my own house, I don't need my contact details on screen! At all other times the regular pin required screen works fine.
I'm just trying to get to a point where, when I'm at home and SmartLock is doing its thing, I can switch on directly, without any additional screens at all.
AidanBell said:
I'm just trying to get to a point where, when I'm at home and SmartLock is doing its thing, I can switch on directly, without any additional screens at all.
Click to expand...
Click to collapse
Yes, that's what we want. We need Google for that. Because the only way to bypass the 'lock screen swipe' is to disable all lock options.
NLBeev said:
Yes, that's what we want. We need Google for that. Because the only way to bypass the 'lock screen swipe' is to disable all lock options.
Click to expand...
Click to collapse
Thanks. In which case it's a shame that enabling/disabling the lock screen isn't a single operation, but requires putting in the pin code. Otherwise it wouldn't be difficult to setup an if/then automation; "If I'm at home, then switch off lock screen; if I'm away from home, then switch on lock screen".
But since that's not possible, I guess I'm scuppered. Unless anyone has any ideas ... A third-party app, perhaps?
AidanBell said:
....
But since that's not possible, I guess I'm scuppered. Unless anyone has any ideas ... A third-party app, perhaps?
Click to expand...
Click to collapse
There are unlock apps in the playstore, but that kind of apps need root access to bypass the lock screen.
Be carefull.
AidanBell said:
"If I'm at home, then switch off lock screen; if I'm away from home, then switch on lock screen".
Click to expand...
Click to collapse
That sounds like something that Tasker would do.
dahawthorne said:
That sounds like something that Tasker would do.
Click to expand...
Click to collapse
Unfortunately I don't believe that any automation/macro app would be able to do that, because switching on SmartLock requires a sequence of actions under Settings, including twice entering a four digit code. I've never used Tasker, so I may be wrong, but surely that's not possible even for that app?
I may well be wrong, since I managed only a few simple tasks with the direct-buy Tasker (i.e. non-Play Store) and then lost the key, and the developer had also lost my registration, so I stopped using it. But it should be possible to create a Tasker task along the lines of "at home don't lock" which should remove the need for a code entry - I'll have to defer to our colleagues who regularly use Tasker.
Thank you very much for that. I've had play with "AutomateIt" which I currently use, and which is a simpler version of "Tasker", and in fact it offers the same screen lock/unlock feature that you discribed. I tried it, it works, however when the screen lock is unlocked, I nevertheless still have to wipe away the clock/contact info screen, so I'm afraid I'm back at square one again.
Hi, on my S7 I did deactivate the notification bar on my lock screen.
But I cannot find the setting on my S10.
When my S10 is locked, I do not want to get the notification bar by pulling down (to change Wifi, mobile connection, bluetooth and so on).
It's just, because the kids play with my phone and they do not know how to unlock it. But when the notification bar shows up on the lockscreen, the can change the settings of all my sensors and stuff
Quite annoying.
Thanks for your help.
Settings -> Lock screen -> Secure lock settings
Turn on "Lock network and security"
Thanks, but this doesn't help. It was already checked.
The bar can still be pulled down.
On my S7, this wasn't possible at all. I could deactivate completely.
Outbreak444 said:
Settings -> Lock screen -> Secure lock settings
Turn on "Lock network and security"
Click to expand...
Click to collapse
svenvaeth said:
Thanks, but this doesn't help. It was already checked.
The bar can still be pulled down.
On my S7, this wasn't possible at all. I could deactivate completely.
Click to expand...
Click to collapse
Yes, but it should ask for you to unlock it to change any settings. Give it a shot.
It only does that for wifi or mobile connections. But you can still switch off auto sync and other stuff.
Outbreak444 said:
Yes, but it should ask for you to unlock it to change any settings. Give it a shot.
Click to expand...
Click to collapse
Try Cerberus. It has that option. But it has so much more.
This one is much simpler
https://play.google.com/store/apps/details?id=com.nezdroid.lockscreenprotector&hl=en
There are both paid options I think.
Do the kids just grab it or do you hand it to them? If you hand it to them then in the same menu there is an option called "Show lockdown option". From your Lock screen, holding down the power button will give you the option to lock it down. That should prevent everything you're worried about. The only thing is that you'd have to manually do it every time.
arrggg...it works, BUT....the fingerprint requires the android lock screen mode. And the fingerprint is needed for my online banking. So I cannot use another lock screen app. Damn it...it would have been a nice solution.
tiho5 said:
Try Cerberus. It has that option. But it has so much more.
This one is much simpler
https://play.google.com/store/apps/details?id=com.nezdroid.lockscreenprotector&hl=en
There are both paid options I think.
Click to expand...
Click to collapse
Hi,
New Pixel 7 form Amazon DE. Latest uptdate instaled.
In Settings -> Security
Screen lock (None, Swipe, pattern, PIN, password)
FaceUlock
Only above options avalible
Lack of Fingerprint Unlock option.
Does anyone have similar problem or have an idea how to reslove it ?
Many thnx
sign_up said:
Hi,
New Pixel 7 form Amazon DE. Latest uptdate instaled.
In Settings -> Security
Screen lock (None, Swipe, pattern, PIN, password)
FaceUlock
Only above options avalible
Lack of Fingerprint Unlock option.
Does anyone have similar problem or have an idea how to reslove it ?
Many thnx
Click to expand...
Click to collapse
You should consider doing a factory reset and see if the option appears in the settings.
dexlemaffo said:
You should consider doing a factory reset and see if the option appears in the settings.
Click to expand...
Click to collapse
Thnx for replay. i did FRs a few times before and once now, from Phone menu and boot menu as well
Just tested phone using Phone Doctor Plus app. and FP test failed.
I'm staring to think that FP sesnor is broken.
Do you have any ideas how to confirm that before sending back ?
Fingerprint is only a SECONDARY option. You must set one of the other options BEFORE you can enable fingerprints.
TKruzze said:
Fingerprint is only a SECONDARY option. You must set one of the other options BEFORE you can enable fingerprints.
Click to expand...
Click to collapse
Thnx for suggestion. FP doesn't appear either with SINGLE Screen Lock or DOUBLE LS methods.
In other words FP option is not avalible as primary, secondary or 3rd security function.
EDIT:
Tested for each of primary Screen lock (None, Swipe, pattern, PIN, password) setuped on fresh system (after FactoryReset)
FR -> Screen lock (None); FR -> Screen lock (pattern), etc.
sign_up said:
Thnx for suggestion. FP doesn't appear either with SINGLE Screen Lock or DOUBLE LS methods.
In other words FP option is not avalible as primary, secondary or 3rd security function.
EDIT:
Tested for each of primary Screen lock (None, Swipe, pattern, PIN, password) setuped on fresh system (after FactoryReset)
FR -> Screen lock (None); FR -> Screen lock (pattern), etc.
Click to expand...
Click to collapse
Been a little bit but if I recall after FR it will ask you to put in your pin and then confirm. Next screen should be "set up FP (yes/no) If you select yes then you are presented with a screen or two of instructions before you hit ok let's do this. If you don't get that at some point in the setup then return the device, it's broken.
bobby janow said:
Been a little bit but if I recall after FR it will ask you to put in your pin and then confirm. Next screen should be "set up FP (yes/no) If you select yes then you are presented with a screen or two of instructions before you hit ok let's do this. If you don't get that at some point in the setup then return the device, it's broken.
Click to expand...
Click to collapse
Thank you for provided workflow. As at any point I'm not able to recall this, and any of above suggestions didn't bring any solution, i rised return ticket to Amazon.
Thank you all for your time!
Topic won't be investigated by me anymore so can be closed
UPDATE
Just recived new piece, everythng is working fine w/o and with december update. Obviously it was device malfunction.