I'm looking for a good glass screen protector that does not effect the clarity of the screen too much (dry application) also would like the finger scanner to still function correctly anyone got any suggestions for what they are using on there tab s6 ?
I'm thinking about getting the olixar glass one
(2 Pack) Supershieldz for Samsung Galaxy Tab S5e / Tab S6 (10.5 inch) Screen Protector, (Tempered Glass) Anti Scratch, Bubble Free https://www.amazon.com/dp/B07NXNMSDS/ref=cm_sw_r_cp_taa_K1IODbP1H8H97
Related
I have ordered many screen protector on ebay and most are ugly and with bad dimension respect of my galaxy s6 edge.
After i tried know brands:
1) Spigen flex hd protector:
http://forum.xda-developers.com/showpost.php?p=60261658&postcount=82
Good dimension but with strange texture and orange effect.
2) Spigen Steinheil Curved Crystal
http://forum.xda-developers.com/showpost.php?p=61416391&postcount=102
Best protector imho but after a 1 day top right corner no longer remains on the screen. I noticed that there are many with the same problem. ( i want to try again in future )
3) Now i tried the Gadget Shieldz, wet application.
Perfect dimension, fit 99.8% on the edge, a very slight orange effect but good feel and apparence.
I am waiting for a decent tempered glass...
Gadget Shieldz picture
Hello everyone. When I used a note 7 I was sick of spending money on a curved protector, so a dude I knew used a flat protector from another Samsung phone on it, the plus was that it was great, the only con was that the edges were left out, but since I never used the edge screen, I didn't bother.
Is that a possibility with the Note 8? Which phone's screen protector would fit, in a way the edges aren't covered, just a flat tempered glass
I have a curve screen protector and it works great especially with the case I have on it
I have been planning to utilize my Tab S6 for drawing, so when I ran across this item on Amazon:
"MOBDIK Screen Protector for Samsung Galaxy Tab S6/Tab S5e Paper Like, 2 Pack Paperlike Galaxy Tab S6/Tab S5e Anti Glare Matte Screen Protector with Easy Installation Kit Paper Texture Galaxy Tab S6 Screen Protector"
I thought I would give it a shot.
It 'fits' the tab S6 screen for the most part (seems a teensy-bit large), and the camera cutout is okay. It feels very different to draw on with the S Pen, just as it is designed to do. The difficulty I am noticing is that my fingerprint (registered prior to installation of the screen protector) no longer 'reads' properly. I then set out to register a 'new' fingerprint (i.e. the same one, only with the protector in place), and it now works only sporadically. This has led to more than one "Please wait 30 seconds before attempting to access the tablet again" sort of message.
Has anyone had experience with this type of screen protector? I am certain it is installed properly and, to be honest the fingerprint issue is really the major issue.
Are there other screen protectors of this type anyone could recommend? Or do they all have this problem?
Thanks in advance,
Angelo D.
Zathras42 said:
I have been planning to utilize my Tab S6 for drawing, so when I ran across this item on Amazon:
"MOBDIK Screen Protector for Samsung Galaxy Tab S6/Tab S5e Paper Like, 2 Pack Paperlike Galaxy Tab S6/Tab S5e Anti Glare Matte Screen Protector with Easy Installation Kit Paper Texture Galaxy Tab S6 Screen Protector"
I thought I would give it a shot.
It 'fits' the tab S6 screen for the most part (seems a teensy-bit large), and the camera cutout is okay. It feels very different to draw on with the S Pen, just as it is designed to do. The difficulty I am noticing is that my fingerprint (registered prior to installation of the screen protector) no longer 'reads' properly. I then set out to register a 'new' fingerprint (i.e. the same one, only with the protector in place), and it now works only sporadically. This has led to more than one "Please wait 30 seconds before attempting to access the tablet again" sort of message.
Has anyone had experience with this type of screen protector? I am certain it is installed properly and, to be honest the fingerprint issue is really the major issue.
Are there other screen protectors of this type anyone could recommend? Or do they all have this problem?
Thanks in advance,
Angelo D.
Click to expand...
Click to collapse
If it's a matte o textured Screen Protector then it's probable applying some distortion to the screen causing the optical fingure print read to not work right. Just re-egister and you'll probably be fine.
Zathras42 said:
I have been planning to utilize my Tab S6 for drawing, so when I ran across this item on Amazon:
"MOBDIK Screen Protector for Samsung Galaxy Tab S6/Tab S5e Paper Like, 2 Pack Paperlike Galaxy Tab S6/Tab S5e Anti Glare Matte Screen Protector with Easy Installation Kit Paper Texture Galaxy Tab S6 Screen Protector"
Angelo D.
Click to expand...
Click to collapse
I had no idea something like this exists! I too will be be drawing and 'painting', so this sounds great. Thanks for sharing.
I had a similar issue after installing a glass screen protector. I re-registered my thumbprint, and it helped some, but what really fixed it for me, is, I registered the same thumb in all three fingerprints. So now it almost always recognized it as one of the three, and unlocks the tablet.
Skinomi has matte protectors. I've used them in the past, don't get the horrible pen drag and indenting like on glossy protectors. But after having to remove one because of damage I decided to go back to glass protectors because of the rainbow sparkle effect the matte protectors cause, very noticable on white. Didn't bother me at first it or when using it, but after seeing the screen bare it was too hard to go back. So my advice, don't remove it if you go this route.
I bought this one:
BERSEM Screen Protector for Samsung Galaxy Tab S6/Tab S5e Paper Like, 2 Pack Paperlike Galaxy Tab S6/Tab S5e Anti Glare Matte Screen Protector With Easy Installation Kit Paper Texture Galaxy Tab S6 Screen Protector https://www.amazon.com/dp/B07WLKFKNP/ref=cm_sw_r_cp_taa_qXQKDbSEZCVDZ
Works fine with the fingerprint sensor. But, I did have to change to the gray pen tip, as it was wearing down the standard soft white tip too quickly.
Samsung Galaxy Note 20 Ultra
Case: Root Co. Gravity Shock Resist Tough & Basic Case
https://one2world.com.sg/collections/root-co
Screen Protector: ZEELOT PureGlass 3D Matte LOCA Tempered Glass Screen Protector (Fingerprint Works)
https://one2world.com.sg/collection...en-protector-for-samsung-galaxy-note-20-ultra
Have been rolling with the white stone dome and obviously love the feel but lost the functionality of my fingerprint sensor. Also butchered the application so whites look bad because of the dust underneath and whatnot.
I've been getting harassed with some screen protectors especially this Deawi Privacy/ screen protector . I'm open to a change if it'll protect from scratches and get fingerprint back .
I am using the amfilms one, and the fingerprint sensor is actually quite good
komugi said:
I am using the amfilms one, and the fingerprint sensor is actually quite good
Click to expand...
Click to collapse
Thanks dude. I appreciate the feedback . Just spent an hour and 30 minutes picking off my white stone dome that was cracked and the application process didn't go well so there were all kinds of dust spots underneath. . . The one I was going to apply ended up being for the small note. Rookie mistake
np, just make sure you follow the instructions with the small metal weight on the fingerprint sensor
I have been using the Ringke Dual Easy Wing film since I got my 20 Ultra.
Dropped my phone face down on rocks, tore the screen protcector but no damage to the screen.
No issues with the fingerprint reader at all. Spen is hit or miss and can leave slight indents in the film if pressed too had.
Want to switch to temperated glass, but my note 9 left a bad taste in my mouth with tempered glass popping off and dust getting under it.
Amazon.com: Ringke Dual Easy Wing (2 Pack) Screen Protector Compatible with Galaxy Note 20 Ultra Case 5G (2020) : Cell Phones & Accessories
Amazon.com: Ringke Dual Easy Wing (2 Pack) Screen Protector Compatible with Galaxy Note 20 Ultra Case 5G (2020) : Cell Phones & Accessories
www.amazon.com
TheXclusive814 said:
I have been using the Ringke Dual Easy Wing film since I got my 20 Ultra.
Dropped my phone face down on rocks, tore the screen protcector but no damage to the screen.
No issues with the fingerprint reader at all. Spen is hit or miss and can leave slight indents in the film if pressed too had.
Want to switch to temperated glass, but my note 9 left a bad taste in my mouth with tempered glass popping off and dust getting under it.
Amazon.com: Ringke Dual Easy Wing (2 Pack) Screen Protector Compatible with Galaxy Note 20 Ultra Case 5G (2020) : Cell Phones & Accessories
Amazon.com: Ringke Dual Easy Wing (2 Pack) Screen Protector Compatible with Galaxy Note 20 Ultra Case 5G (2020) : Cell Phones & Accessories
www.amazon.com
Click to expand...
Click to collapse
So, really hating tempered glass on this device. Had good luck for a few weeks with a fresh install of tempered glass by white stone. But it quickly degenerated into working 0% of the time.. at home and tried a Chinese brand I thought was going to be worth trying after they peppered me with ads on Facebook and it was awful. Doesn't have enough adhesive to even get it close enough to the screen that regular finger presses register.
The idea of a wet apply is growing on me because I think at least it will not make my fingerprint sensor useless. Maybe I will try yours but getting a little tired of thinking money into protecting this thing. It's naked right now and I love that the fp sensor actually works but I feel like I'm playing with fire .
I had whitestone dome - developed a very fine crack across the glass - decided to replace with the spare whitestone glass and buggered the installation (first time ever after installations on many devices over the years) switch to Rinke Dual Wing 4 weeks ago and extremely impressed. Finger Print scanner works perfectly - any indentation you cause will disappear with the film relaxes. Highly recommend.
BTW never had a finger scanner issue with whitestone dome glass - it worked flawlessy.
Rinke extremely easy to put and get rid of dust as you do it.
I installed ESR Gear's tempered glass screen protector and a clear case, and camera protector for that matter, in August 2020 and never been happier: no dust, no air bubbles, fingerprint sensor works and one can see the phone in its original - Mystic Bronze - color.
TheXclusive814 said:
I have been using the Ringke Dual Easy Wing film since I got my 20 Ultra.
Dropped my phone face down on rocks, tore the screen protcector but no damage to the screen.
No issues with the fingerprint reader at all. Spen is hit or miss and can leave slight indents in the film if pressed too had.
Want to switch to temperated glass, but my note 9 left a bad taste in my mouth with tempered glass popping off and dust getting under it.
Amazon.com: Ringke Dual Easy Wing (2 Pack) Screen Protector Compatible with Galaxy Note 20 Ultra Case 5G (2020) : Cell Phones & Accessories
Amazon.com: Ringke Dual Easy Wing (2 Pack) Screen Protector Compatible with Galaxy Note 20 Ultra Case 5G (2020) : Cell Phones & Accessories
www.amazon.com
Click to expand...
Click to collapse
I second the Dual Easy Wing have them on both my wifes and I Note 20 Ultra's. If these Dumb A$%^&&*& would stop making these useless rounded edge screens we would be good.