Database Develop

Mi FastBoot Unbrick Tool 2.0

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this tool
* before flashing/using it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is this tool?
After getting so many errors while using MiFlash Tool, I decided to find a simple but an effective way for flashing the rom without any errors.After many attempt i was able to finad a perfect solution for it.
**********************************************************************
The main cause of getting bootloop is relocking of the bootloader
**********************************************************************
This tool was created as a result of it. Hope this will help all others who are facing this issue..
Features of this Tool
Small in size nearly 3 mb
No need of edl,Works with fastboot mode
Chance of failure is 1% or below
Downloads
Requirements
Java Installed In PC. Get java form here
ADB drivers installed..Get it from here
Pda Net (optional)..Get it from here
Bootloader Unlocked
Get Fastboot rom from here
What are the problems ocuured whenusing MiFlashTool??
The main errors i faced with Mi FlashTool Are:-
Unspecified error(0x80004005
Not enough Memory
Error while receiving halo Packet
And many other errors i havent noticed or didnt cared
What/How this tool works?
-So after bricking my phone many time (nor even able to enter Recovery Mode) and many unsuccessfull flash using MiFlashTool i looked into the Fastboot rom files and Got an idea about how the Flashing process works.
-All you need is fastboot to unbrick the phone. No edl or no other things to flash the rom.
- For almost every Mi Phone , unbricking will be same as mentioned in Manual Method(This tool is designed for RN3).If i get testers will think about doing for other models also.
- I used the RN3 rom from here
***************************************************************
(only use if you replace the Unlocked Bootloader file)
***************************************************************
-First Things first
Run cmd ad administrator and run the following command one by one
Code:
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
3. Reboot your system.
-Download the file from the attachment and extract it in the images folder of the fastboot rom.The folder will have many files like boot,cache,cust etc..
-Once extracted the software copy and paste the unlocked bootloader file in the images folder and overwrite any existing file.
-Now run the software and follow the instructions (its very noob friendly,I think there will be no more need for detailed tutorial):good:
- Once the flashing Process is completed your phone will be good to go
Not Working ?? Try Manually
- Go to Images Folder of the fastboot rom and holding shift key right click to Open Command Window Here. :good:
- Once you entered the cmd and execute the command individually as shown below.
Code:
fastboot flash tz tz.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash hyp hyp.mbn
fastboot flash tzbak tz.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot flash hypbak hyp.mbn
fastboot erase boot
fastboot flash modem NON-HLOS.bin
fastboot –S 512M flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash sec sec.dat
fastboot flash dsp adspso.bin
fastboot flash mdtp mdtp.img
fastboot erase splash
fastboot flash splash splash.img
fastboot erase DDR
fastboot flash cust cust.img
Once thats done your phone will be ready to go.
If you replaced the unlocked bootloader file you may get continuous reboot. If you face something like that simply type the following command(After doing above process only)
Code:
fastboot oem unlock-go
Your Phone will reboot. If it Didnt Reboot Type this code to reboot
Code:
fastboot reboot
Once the above steps are done your phone will be back in action :good:
It will reboot system, and wait for your device to boot accordingly, no worries it will listen to your prayers to unbrick. :silly:
Enjoy
DISCLAIMER: DO ON YOUR OWN RISK. Flashing can potentially bricked or bootloop your device.
F.A.Q
1.Developer it dosent worked for me!!
Ans:- Use manual method
2.Software not opening?
Ans:- Install Java from above link.
3.I have a suggestion
Ans:- Use Contact me Option in the Software. Will reply as soon as possible
4.Iam willing to be a tester
Ans:- PM me
5. How can i help further?
A. Consider donation and pm me if interested.
Payapl:- here
Paytm:- here
XDA:DevDB Information
Mi FastBoot Unbrick Tool, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
adithyan25, pknow
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2017-01-15
Created 2017-01-15
Last Updated 2017-01-15

Reserved

screenshot? this can unlock bootloader? and where is the link download??

zilan said:
screenshot? this can unlock bootloader? and where is the link download??
Click to expand...
Click to collapse
So fast final edit going on

reserved

I have a question, How can you use fastboot mode when the device's bootloader is locked? Because fastboot will work only if the bootloader is unlocked, so if it's locked then you will get a message showing "remote device locked".

Raaj52 said:
I have a question, How can you use fastboot mode when the device's bootloader is locked? Because fastboot will work only if the bootloader is unlocked, so if it's locked then you will get a message showing "remote device locked".
Click to expand...
Click to collapse
In my knoledge it gets locked while messing with unknown things.
Read Op i mentioned we need unlocked bootloader.

Two questions-
1-does it matter if bootloader is unofficially unlocked.
2- does this work only for rn3 Kenzo? Would it work for other mi models?
Edit: other rn3 models not mi as incorrectly written. OP mentions it is for rn3 only

adithyan25 said:
In my knoledge it gets locked while messing with unknown things.
Read Op i mentioned we need unlocked bootloader.
Click to expand...
Click to collapse
I read that, what I am asking is when a device gets bricked and bootloader gets relocked how can you say this tool can unbrick that device? So this tool is not meant for unbricking devices in which bootloader is locked.
Please don't think I am discouraging you! I am giving you a more clear picture.

Raaj52 said:
I read that, what I am asking is when a device gets bricked and bootloader gets relocked how can you say this tool can unbrick that device? So this tool is not meant for unbricking devices in which bootloader is locked.
Please don't think I am discouraging you! I am giving you a more clear picture.
Click to expand...
Click to collapse
Yeah...I got it..I wrote another thread on unbricking the tool if boot loader is locked... This thread is for whom those who are stuck at bootloop or mi logo after they try messing up with unknown things...including me...
Peace

anshude1 said:
Two questions-
1-does it matter if bootloader is unofficially unlocked.
2- does this work only for rn3 Kenzo? Would it work for other mi models?
Edit: other rn3 models not mi as incorrectly written. OP mentions it is for rn3 only
Click to expand...
Click to collapse
Nope mine unofficially unlocked worked charm...
And I'm using kenzo..and this tool only designed for kenzo...but manual method is same for all devices

adithyan25 said:
Yeah...I got it..I wrote another thread on unbricking the tool if boot loader is locked... This thread is for whom those who are stuck at bootloop or mi logo after they try messing up with unknown things...including me...
Peace
Click to expand...
Click to collapse
Hey bro, I am trying to help you! Check your PM

Raaj52 said:
Hey bro, I am trying to help you! Check your PM
Click to expand...
Click to collapse
Peace ...
(Y) replied

HELP ME
I want to contact you can you give your mail
i m using redmi note 2 2014818 model
every rom cause bootloop even mi rom too
help me pls its mine dad phone
help

THEPAINCOMES said:
I want to contact you can you give your mail
i m using redmi note 2 2014818 model
every rom cause bootloop even mi rom too
help me pls its mine dad phone
help
Click to expand...
Click to collapse
Wrong section to ask... Download your phones stock ROM from miui website.delete bootloadet file and flash it using miflash tool.
Phone will be back to life again...pm me if u have any doubts

I was using this method for my old redmi 3 and its work well to unbrick in any condition (except hardware failure) and now its available for redmi note 3 pro! The different is I was using CMD manually LOL
Sent from my kenzo using XDA Labs

Please need help! I used regional ROM with TWRP at unlocked divece. After rom update i get NVram fail and "no sim" note. I try to recovery nvram from TWRP but it give me fail notification. Then I restore IMEI and MAC with MauiMeta utilites, flash oficial china rom (and lock preloader) - it's not fixed, same "no sim" . There is life device, IMEI, MAC, modem version - all here, but still "no sim". If i make emergency call - it's works. What can i do more?

maxnah said:
Please need help! I used regional ROM with TWRP at unlocked divece. After rom update i get NVram fail and "no sim" note. I try to recovery nvram from TWRP but it give me fail notification. Then I restore IMEI and MAC with MauiMeta utilites, flash oficial china rom (and lock preloader) - it's not fixed, same "no sim" . There is life device, IMEI, MAC, modem version - all here, but still "no sim". If i make emergency call - it's works. What can i do more?
Click to expand...
Click to collapse
Double Check first which device u have . kenzo or kate ?
Dont flash kenzo rom on kate or vice versa.
Kenzo is redmi note 3 pro . size is 15 cm
Kate is redmi note 3 special edition. Size is 15.2 cm.

You can flash kenzo rom on kate (and kate on kenzo). It's same. You cannot flash kenzo firmware on kate (and cannot flash kate firmware on kenzo) !!!
Odoslané z Redmi Note 3 pomocou Tapatalku

Black_Stark said:
Double Check first which device u have . kenzo or kate ?
Dont flash kenzo rom on kate or vice versa.
Kenzo is redmi note 3 pro . size is 15 cm
Kate is redmi note 3 special edition. Size is 15.2 cm.
Click to expand...
Click to collapse
sorry, wrong post - hennesy (MTK)

HELP; stuck at reflash service bootloder in ost tools

i have unlocked my bootloader and now im not able to roll back to stock firmware.
please help me.

Pinchyneilprince said:
i have unlocked my bootloader and now im not able to roll back to stock firmware.
please help me.
Click to expand...
Click to collapse
Which version of OST are you using? You need to use version 6.0.4

Pinchyneilprince said:
i have unlocked my bootloader and now im not able to roll back to stock firmware.
please help me.
Click to expand...
Click to collapse
Did you use
Code:
fastboot flashing unlock_critical
or just
Code:
fastboot oem unlock-go
You have to do
Code:
fastboot flashing unlock_critical
to be able to reflash bootloader

Thank q sir.
Doktaphex said:
Did you use
Code:
fastboot flashing unlock_critical
or just
Code:
fastboot oem unlock-go
You have to do
Code:
fastboot flashing unlock_critical
to be able to reflash bootloader
Click to expand...
Click to collapse
This worked for me thank q sir.

Doktaphex said:
Did you use
Code:
fastboot flashing unlock_critical
or just
Code:
fastboot oem unlock-go
You have to do
Code:
fastboot flashing unlock_critical
to be able to reflash bootloader
Click to expand...
Click to collapse
I am in same position! Bricked maybe ...
I previously got an unlock bootloader key and all was great.
I then went to relock my bootloader and now I can only get into download mode.
I tried loading up into OST but it freezes on ‘reflash service bootloader’.
I was on the latest Android P Beta.
I even tried unlocking the bootloader using the original .bin file but that didn’t work.
Is there anything I can do?

Deleted....

I had the same problem yesterday evening.... I download the rollback zip to Oreo on Nokia developper website, i copy it on my external sd card, i boot in recovery mode, wipe all data, and i choose apply an update from sd card, and i zelect the zip, and it works well!
The only problem is the loss of all your data if it was not saved...

poczynek said:
Did you use or just
You have to do
I am in same position! Bricked maybe ...
I previously got an unlock bootloader key and all was great.
I then went to relock my bootloader and now I can only get into download mode.
I tried loading up into OST but it freezes on ‘reflash service bootloader’.
I was on the latest Android P Beta.
I even tried unlocking the bootloader using the original .bin file but that didn’t work.
Is there anything I can do?
Click to expand...
Click to collapse
If u are on locked bootloader then OST won't work. OST will work only in Unlocked bootloader.
And u can't enter in recovery mod. Only download mod. Correct? Same happened with me also. Now my phone is in service centre for tha past 11 days. They told Motherboard issue and can claim warranty. So i am waiting for new motherboard and my 7+.

Pinchyneilprince said:
i have unlocked my bootloader and now im not able to roll back to stock firmware.
how do u unlocked bootloader?
Click to expand...
Click to collapse

speechless said:
Pinchyneilprince said:
i have unlocked my bootloader and now im not able to roll back to stock firmware.
how do u unlocked bootloader?
Click to expand...
Click to collapse
U can pay and buy unlock code. Guys doing this in telegram. Contact them
Click to expand...
Click to collapse

Rajeev said:
speechless said:
U can pay and buy unlock code. Guys doing this in telegram. Contact them
Click to expand...
Click to collapse
i dont have creditcart to pay :crying: anyway can u send me his profile link pls
Click to expand...
Click to collapse

speechless said:
Rajeev said:
i dont have creditcart to pay :crying: anyway can u send me his profile link pls
Click to expand...
Click to collapse
I don't have buddy. I lost all contacts.. sorry..
Click to expand...
Click to collapse

Rajeev said:
speechless said:
I don't have buddy. I lost all contacts.. sorry..[/QUO
It's ok bro no prob
Click to expand...
Click to collapse
Click to expand...
Click to collapse

siberflyers said:
I had the same problem yesterday evening.... I download the rollback zip to Oreo on Nokia developper website, i copy it on my external sd card, i boot in recovery mode, wipe all data, and i choose apply an update from sd card, and i zelect the zip, and it works well!
The only problem is the loss of all your data if it was not saved...
Click to expand...
Click to collapse
can you give me thd link pls

Doktaphex said:
Did you use
Code:
fastboot flashing unlock_critical
or just
Code:
fastboot oem unlock-go
You have to do
Code:
fastboot flashing unlock_critical
to be able to reflash bootloader
Click to expand...
Click to collapse
can you plz tell me how do you use codes with OST, thanks

[STOCK][FASTBOOT][CN | EU | IN] Fastboot Flashable Images For RealMe X2

Disclaimer :
Code:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Your warranty will be void if you tamper with any part of your device / software.
Download :
RMX1992EX_A18_fastboot [IN]
RMX1991_A14_fastboot [CN]
RMX1993EX_A18_fastboot [EU]
Fastboot Commands :
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
Latest Fastboot :
Download
Fastboot Images For Other Realme Devices :
Github
Guide to extract Fastboot images from ozip :
Credits :
jamflux
Regards,
acervenky

FAQs
I'm getting the "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it." Error, what should I do now?
Flash the vbmeta using this command :
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
I'm getting the "Invalid sparse file format at header magic" Error, does that mean that the images are corrupt?
No! Just ignore the error, if you get the "Finished" message it means that the image has been flashed without any issues.
Can I cross-flash images?(CN -> IN & vice versa)
Some users have reported that the images can't be flashed due to different partition sizes, proceed at your own risk!
Regards,
acervenky

acervenky said:
Disclaimer :
Download :
RMX1992EX_A18_fastboot [IN]
Fastboot Commands :
Latest Fastboot :
Download
Credits :
jamflux
Regards,
acervenky
Click to expand...
Click to collapse
Thank you ?
Need CN fastboot rom though (rmx1991) ?

firewolfxda said:
Thank you
Need CN fastboot rom though (rmx1991) ?
Click to expand...
Click to collapse
CN Fastboot images added to OP!
Regards,
acervenky

EU Fastboot images added to OP!
Regards,
acervenky

acervenky said:
CN Fastboot images added to OP!
Regards,
acervenky
Click to expand...
Click to collapse
Thank you

acervenky said:
I'm getting the "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it." Error, what should I do now?
Flash the vbmeta using this command :
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
I'm getting the "Invalid sparse file format at header magic" Error, does that mean that the images are corrupt?
No! Just ignore the error, if you get the "Finished" message it means that the image has been flashed without any issues.
Can I cross-flash images?(CN -> IN & vice versa)
Some users have reported that the images can't be flashed due to different partition sizes, proceed at your own risk!
Regards,
acervenky
Click to expand...
Click to collapse
I'm getting the "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it." Error and I can't enter fastboot mode since the phone keeps going on and off, and Everytime I try to connect it on my laptop it will keep on turning on and off .

Anyone successfully flashed this fastboot images over RealmeUI?

Using this code for flashing vbmeta in cmd says fastboot: uknown option -- disable verity
Kindly help asap

Anujlamba said:
Using this code for flashing vbmeta in cmd says fastboot: uknown option -- disable verity
Kindly help asap
Click to expand...
Click to collapse
Are you using the latest version of fastboot?
Regards,
acervenky

Hi.
can we use a flash tool app for these images? and can you please recommend one?
or can you provide .mbn and .bin files required for flashing with qpst?

Big Boy said:
Hi.
can we use a flash tool app for these images? and can you please recommend one?
or can you provide .mbn and .bin files required for flashing with qpst?
Click to expand...
Click to collapse
These images should be flashed using fastboot, link is posted in OP.
And about the QPST flashable files, I have no way to obtain them, apologies!
Regards,
acervenky

acervenky said:
These images should be flashed using fastboot, link is posted in OP.
And about the QPST flashable files, I have no way to obtain them, apologies!
Regards,
acervenky
Click to expand...
Click to collapse
thanks mate

Not Working over realme ui
SkyeJace said:
Anyone successfully flashed this fastboot images over RealmeUI?
Click to expand...
Click to collapse
installed realme ui 1992 , but it shows only realme boot logo and then restart and boot into recovery
and after i tried this fastboot method and successfully flashed all images but didn't work. it's not working if your device is soft bricked .

SkyeJace said:
Anyone successfully flashed this fastboot images over RealmeUI?
Click to expand...
Click to collapse
Yes i did ....................it works
---------- Post added at 07:24 AM ---------- Previous post was at 07:20 AM ----------
acervenky said:
Disclaimer :
Code:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Your warranty will be void if you tamper with any part of your device / software.
Download :
RMX1992EX_A18_fastboot [IN]
RMX1991_A14_fastboot [CN]
RMX1993EX_A18_fastboot [EU]
Fastboot Commands :
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
Latest Fastboot :
Download
Fastboot Images For Other Realme Devices :
Github
Credits :
jamflux
Regards,
acervenky
Click to expand...
Click to collapse
Thanks Bro u saved my phone. thanku thanku thanku thanku thanku thanku thanku thanku sooooooooooooooooooo muchhhhhhhhhhhhhhh my phone is working again...................Thanks again
My phone :
Realme X2 8GB Indian Variant UI 1.0 Android 10

Sir After the Realme UI Update I am facing a lot of issues and wanna Revert Back to Color Os on My Realme X2 Indian Unit...
Can I Flash this...
I haven't Unlocked Bootloader or Rooted my Device..
Please Help!!!

nitin_garg55 said:
Sir After the Realme UI Update I am facing a lot of issues and wanna Revert Back to Color Os on My Realme X2 Indian Unit...
Can I Flash this...
I haven't Unlocked Bootloader or Rooted my Device..
Please Help!!!
Click to expand...
Click to collapse
You can't flash this on a locked bootloader, you can try flashing the COS ozip via stock recovery.
Regards,
acervenky

Hey
i tried to install but when its turn on its stuck or in the "realme powerd by android" screen or turn on and off(bootloop).
any solution? pls

Hey
i tried to install but when its turn on its stuck or in the "realme powerd by android" screen or turn on and off(bootloop).
any solution? pls
also when i install rom from twrp wich also not booting
is write "failed to mount data/... device bussy" or something lke that any idea -maybe that is the reason?
"mount: failed to mount /dev/block/bootdevice/by-name/userdata at/data:device or resource busy

Hi friend, I've RMX1992AEX indian varient. I was on C_08 update before I flashed the latest C_11 via twrp. At that time I took backup of all the partition of C08 update just to be on safer side before I attempt to update C_11 via twrp.
The update was successful and the update of C_11 was running fine but due to my own mistake I cleared fbe cache from recovery the next day and my entire internal storage including data partition was encrypted and I was stuck in bootloop. I managed to boot back to system on C_11 by formatting the data partition and internal storage.
Now I want to restore the backup of C_08 back to my phone so that atleast I can get the apps and its data back.
I tried flashing the old C_08 zip over C_11 and got the error that
"this software is 1970, the current one is 1971"
Simply means I cannot flash old update over the latest one.
I tried editing the updater script and removed the line which detected the software version but I got a new twrp error :5 about which there no information on Google.
I directly tried restoring the data partition of C_08 over C_11 but got error : "createTarFork() : error 255"
Tried all the solution out there on the Internet to no help.
I wanted to know if there's any way I can get back to the old C_08 update somehow so that I can restore the old twrp backup and get back all the lost data.
I was wondering if there are and fastboot images of Realme UI for "1992AEX" model so that it can help to go back to first realme UI version using which I can flash the c_08 update and restore the data.
Or if there is any other way I can get back, please help me with it.

[SHARE][RECOVERY]TWRP working form EMUI 9.1

finally i found twrp that work perfect for emui 9.1 firmware
download link and password for extract on this site
{Mod edit: Link removed. Not suitable iaw. rule no. 11 of the forum rules. Oswald Boelcke}

Credits where due (though I can't 100% confirm this, given all downloads on the website give me error 404)
{Mod edit: Link removed. References to 4pda are not accepted on XDA! Oswald Boelcke}
EDIT: I really don't know what I may have linked here, but let's pretend it was this https://github.com/rxuglr/android_device_huawei_leland-recovery

Since this is unofficial, how can I know if it is safe?

Alex46165 said:
Since this is unofficial, how can I know if it is safe?
Click to expand...
Click to collapse
Here you go

I get this error on EVERY TWRP:
FAILED: (remote: partition lengh get error)
Is there no possibility with the EMUI 9.1?

layalala said:
I get this error on EVERY TWRP:
FAILED: (remote: partition lengh get error)
Is there no possibility with the EMUI 9.1?
Click to expand...
Click to collapse
You are doing something wrong...

@-Alf-
and what could be wrong?
The device is unlocked, in fastboot mode and is listed as fastboot device.
'sudo fastboot flash recovery TWR9.img'

layalala said:
what could be wrong?
Click to expand...
Click to collapse
The command.
For emui 9.1 use
fastboot flash recovery_ramdisk xxxx.img

-Alf- said:
You are doing something wrong...
Click to expand...
Click to collapse
and what could be wrong?
The device is unlocked, in fastboot mode and is listed as fastboot device.
'sudo fastboot flash recovery TWR9.img'
-Alf- said:
The command.
For emui 9.1 use
fastboot flash recovery_ramdisk xxxx.img
Click to expand...
Click to collapse
THANKS A LOT!!!
Just did not read it on the page... stupid

Question How to Unlock Bootloader and Install Global ROM

My GT2 phone is using Chinese ROM, now I want to install the International ROM version, what should I do?
Realme GT 2 Firmware (RMX3311, RMX3312) - Realme Firmware
Download Realme GT 2 Firmware RMX3311, RMX3312 Official Flash File (Stock ROM). flash your phone using realme flashtool or MSM Download tool.
realmefirmware.com

Is there a guide for the flash?

Michele said:
Is there a guide for the flash?
Click to expand...
Click to collapse
Yes there is guide for GT 2 pro but not for GT 2 on the official Realme community!

Don't you need bootlocker unlocked for the GT2 to flash global or indian rom ? There is no guide to unlock the GT2 as far as I know.

i guess we are doomed :S

Hi, i was able to unlock bootloader on rmx3310 with this tutorial https://c.realme.com/in/post-details/1526491339024314368 .

Finally some good news for us

hoangzk9 said:
Successful convert from Chinese rom to EU rom and IN rom
Click to expand...
Click to collapse
Same process as the Pro version?

can someone write instructions for our phone and download all the necessary files?

hoangzk9 said:
That's right
Click to expand...
Click to collapse
Witch Rom did you use then?

Well i try to install the RMX3311GDPR_11_A.16_2022042619330152 by extracting the OFL and crossing the files with the Pro version from the tutorial, but i still miss the Recovery.IMG and the Super files are like 8 of them.
I still tried to install them all, (poor decision of mine) and now my phone just boot to the Bootloader, because there is no functional firmware there to boot too.
Because someone help me with this, maybe i can install the Chines OFL version back with Realme_Flash_Tool_v1.0.0.4 and wait till someone actually convert the Global properly?

3xF said:
Well i try to install the RMX3311GDPR_11_A.16_2022042619330152 by extracting the OFL and crossing the files with the Pro version from the tutorial, but i still miss the Recovery.IMG and the Super files are like 8 of them.
I still tried to install them all, (poor decision of mine) and now my phone just boot to the Bootloader, because there is no functional firmware there to boot too.
Because someone help me with this, maybe i can install the Chines OFL version back with Realme_Flash_Tool_v1.0.0.4 and wait till someone actually convert the Global properly?
Click to expand...
Click to collapse
Ok this is dump, i just realize that i forgot to flash the vm-bootsys.img, now global is finally installed

For those who want to try just follow the Pro tutorials like Realme GT2 Pro Global tutorial or this YouTube tutorial with these files, try to install the same order 1 by 1.
Like so...
fastboot flash boot boot.img
Click to expand...
Click to collapse
fastboot flash dtbo dtbo.img
fastboot flash engineering_cdt engineering_cdt.img
fastboot flash metadata metadata.img
fastboot flash oplusreserve2 oplusreserve2.img
fastboot flash splash splash.img
fastboot flash super super.0.1fd62e0e.img
fastboot flash super super.1.da986fb1.img
fastboot flash super super.2.9d938696.img
fastboot flash super super.2.207cb178.img
fastboot flash super super.2.929a3e22.img
fastboot flash super super.2.6573829d.img
fastboot flash super super.2.db4e0b41.img
fastboot flash super super.2.f5b4d41c.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash userdata userdata.img
fastboot flash vm-bootsys vm-bootsys.img
Click to expand...
Click to collapse
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot -w
Click to expand...
Click to collapse
Stock Global Rom

But is it possible to block the bootloader after the firmware on the global?

O think so, but for what i read os not recomended

Hi guys Please help me , what can I do With -- fastboot flash super super.0.1fd62e0e.img cannot load... Only this one what the problem

oneplus dvon said:
Hi guys Please help me , what can I do With -- fastboot flash super super.0.1fd62e0e.img cannot load... Only this one
Click to expand...
Click to collapse
Make sure the name is correct or try to change the name of the file and try again

oneplus dvon said:
I can flash All files but cannot only this one 3Gb file
Click to expand...
Click to collapse

you change the file to 22.img?
so you need to type the change name also on the command