Hi, thanks for reading:
I own a Mi 9T PRO 128GB.
After waiting for a week to unlock, I was able to do so.
Once I unlocked my device I tried to flash TWRP. I flashed a few until I found mauronofrio's TWRP.
Once I entered TWRP I couldn't read my data partitition so I selected Format inside Wipe option.
Now I'm stucked at fastboot logo!
I've tried to manually flash the official ROM I was using (raphael_eea_global_images_V10.3.4.0.PFKEUXM_20190923.0000.00_9.0_eea_65ad59b1cb) manually using fastboot.
Now I have original recovery, but it still won't boot. It just keeps resetting to Miui Unlocked screen.
Please, help me.
Use/flash pixel experience Rom
ntmalol said:
Use/flash pixel experience Rom
Click to expand...
Click to collapse
I lost TWRP, I'm back to official recovery with locked bootloader.
ntmalol said:
Use/flash pixel experience Rom
Click to expand...
Click to collapse
That's a very stupid answer...
---------- Post added at 03:15 PM ---------- Previous post was at 03:15 PM ----------
ebol94 said:
I lost TWRP, I'm back to official recovery with locked bootloader.
Click to expand...
Click to collapse
Your are locked again?
Kollachi said:
Your are locked again?
Click to expand...
Click to collapse
No. When it boots, it shows the word unlocked. Then it goes straight to fastboot.
ebol94 said:
No. When it boots, it shows the word unlocked. Then it goes straight to fastboot.
Click to expand...
Click to collapse
I don't have the answer, but don't sweat it for now. If your bootloader is still unlocked and you gave access to fastboot. There is a way to recover.
Sent from my Mi 9T Pro using Tapatalk
I'm going to follow these steps:
Flashing Recovery ROMs using XiaomiADB
Download and unzip XiaomiADB from here.
Download the Recovery ROM you want to flash from here.
Enter MiRecovery by holding power and volume up simultaneously for 5-10 seconds, then select the third option (Connect with MiAssistant / 连接小米助手).
Connect the device to your PC and open a command prompt in the unzipped folder by typing cmd into the address bar and hitting enter.
Type xiaomiadb sideload_miui into the command prompt, then drag and drop the downloaded ZIP on the command prompt window and hit Enter.
Wait until the installation finishes.
Disconnect the device and wait for it to boot in.
The first boot may take up to 15 minutes.
Wish me luck
PS: I CAN'T BELIEVE HOW SLOW IS TO DOWNLOAD EVERYTHING FROM MIUI. Current speed is 75kbps from https://bigota.d.miui.com/
ebol94 said:
I'm going to follow these steps:
Flashing Recovery ROMs using XiaomiADB
Download and unzip XiaomiADB from here.
Download the Recovery ROM you want to flash from here.
Enter MiRecovery by holding power and volume up simultaneously for 5-10 seconds, then select the third option (Connect with MiAssistant / 连接小米助手).
Connect the device to your PC and open a command prompt in the unzipped folder by typing cmd into the address bar and hitting enter.
Type xiaomiadb sideload_miui into the command prompt, then drag and drop the downloaded ZIP on the command prompt window and hit Enter.
Wait until the installation finishes.
Disconnect the device and wait for it to boot in.
The first boot may take up to 15 minutes.
Wish me luck
Click to expand...
Click to collapse
It failed
D:\XiaomiADB\XiaomiADB>xiaomiadb sideload_miui "D:\Torrent\10340 eea stable\recovery\miui_RAPHAELEEAGlobal_V10.3.4.0.PFKEUXM_964826982c_9.0.zip"
* Miui sideload made by Francesco Tescari, updated 02 Feb 2018 *
* Checking device status *
* Getting recovery info *
* Creating file MD5 hash *
* Querying ota update server, attempt #0 *
Data partition format might not be necessary and will NOT be done automatically after installation.
If the device doesn't reboot or some apps crash after reboot, you need to manually format the device using "format-data" command!
* Starting sideload *
ERROR: Sideload error -> adb: failed to read command: No error
Installation FAILED!, press ENTER to exit
ebol94 said:
It failed
D:\XiaomiADB\XiaomiADB>xiaomiadb sideload_miui "D:\Torrent\10340 eea stable\recovery\miui_RAPHAELEEAGlobal_V10.3.4.0.PFKEUXM_964826982c_9.0.zip"
* Miui sideload made by Francesco Tescari, updated 02 Feb 2018 *
* Checking device status *
* Getting recovery info *
* Creating file MD5 hash *
* Querying ota update server, attempt #0 *
Data partition format might not be necessary and will NOT be done automatically after installation.
If the device doesn't reboot or some apps crash after reboot, you need to manually format the device using "format-data" command!
* Starting sideload *
ERROR: Sideload error -> adb: failed to read command: No error
Installation FAILED!, press ENTER to exit
Click to expand...
Click to collapse
Tell us what do you want to do? Flash stock rom with TWRP? Or do you want to go with a custom rom?
IT'S ALIVE
Finally MiFlash 2017.4.52.0 did the trick.
I flashed raphael_eea_global_images_V10.3.4.0.PFKEUXM_20190923.0000.00_9.0_eea_65ad59b1cb
It took around 600 seconds
After that, finally I have my device again.
Thank you guys for the support. It really means a lot you took the time to read and help me.
---------- Post added at 04:21 PM ---------- Previous post was at 04:21 PM ----------
[/COLOR]
ntmalol said:
Use/flash pixel experience Rom
Click to expand...
Click to collapse
What a baseless reply
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 04:22 PM ---------- Previous post was at 04:21 PM ----------
ebol94 said:
Hi, thanks for reading:
I own a Mi 9T PRO 128GB.
After waiting for a week to unlock, I was able to do so.
Once I unlocked my device I tried to flash TWRP. I flashed a few until I found mauronofrio's TWRP.
Once I entered TWRP I couldn't read my data partitition so I selected Format inside Wipe option.
Now I'm stucked at fastboot logo!
I've tried to manually flash the official ROM I was using (raphael_eea_global_images_V10.3.4.0.PFKEUXM_20190923.0000.00_9.0_eea_65ad59b1cb) manually using fastboot.
Now I have original recovery, but it still won't boot. It just keeps resetting to Miui Unlocked screen.
Please, help me.
Click to expand...
Click to collapse
You got stuck because you didn't flash dm_verity zip file
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 04:27 PM ---------- Previous post was at 04:22 PM ----------
Flash TWRP, then reboot to it, after you enter TWRP, erase data type YES, after you format data, copy disable_dm_verity file to your phone and flash it in twrp. LINK: https://androidfilehost.com/?fid=1395089523397966811
This will block your phone from restoring the stock recovery and will make twrp permanent, and your phone should boot normally.
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 04:38 PM ---------- Previous post was at 04:27 PM ----------
WARNING: DON'T YOU DARE LOCKING BOOTLOADER EVEN BY MISTAKE IF YOU HAVE FLASHED A ROM OF ANOTHER REGION BESIDES WHICH IT CAME WITH OR IT WILL BRICK YOUR PHONE AND YOU'LL HAVE TO WAIT AGAIN BEFORE UNLOCKING BOOTLOADER. IF IT'S EU FLASH BACK EU TO LOCK, IF IT'S GLOBAL FLASH BACK GLOBAL.
Sent from my Redmi K20 Pro using Tapatalk
ishaqtkr said:
---------- Post added at 04:21 PM ---------- Previous post was at 04:21 PM ----------
[/COLOR]What a baseless reply
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 04:22 PM ---------- Previous post was at 04:21 PM ----------
You got stuck because you didn't flash dm_verity zip file
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 04:27 PM ---------- Previous post was at 04:22 PM ----------
Flash TWRP, then reboot to it, after you enter TWRP, erase data type YES, after you format data, copy disable_dm_verity file to your phone and flash it in twrp. LINK: https://androidfilehost.com/?fid=1395089523397966811
This will block your phone from restoring the stock recovery and will make twrp permanent, and your phone should boot normally.
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 04:38 PM ---------- Previous post was at 04:27 PM ----------
WARNING: DON'T YOU DARE LOCKING BOOTLOADER EVEN BY MISTAKE IF YOU HAVE FLASHED A ROM OF ANOTHER REGION BESIDES WHICH IT CAME WITH OR IT WILL BRICK YOUR PHONE AND YOU'LL HAVE TO WAIT AGAIN BEFORE UNLOCKING BOOTLOADER. IF IT'S EU FLASH BACK EU TO LOCK, IF IT'S GLOBAL FLASH BACK GLOBAL.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Hi!
I'm stuck in the exact same spot at OP (stuck in fastboot loop).
I'm unsure how to put roms on the phone, or any data for that matter.
I was in twrp, then i disabled MTP and rebooted, now i can't get back to twrp. When i flash twrp again, it does not show up, instead goes to fastboot no matter the button combination.
Could you or someone please provide me some help. I'm very new to this process and am afraid i've bricked my phone.
Thank you!
I was unlocking bootloader and now 15 minutes I only see mi logo and moving dots above android.
Is this normal and I must wait more or is this soft brick?
ebol94 said:
IT'S ALIVE
Finally MiFlash 2017.4.52.0 did the trick.
I flashed raphael_eea_global_images_V10.3.4.0.PFKEUXM_20190923.0000.00_9.0_eea_65ad59b1cb
It took around 600 seconds
After that, finally I have my device again.
Thank you guys for the support. It really means a lot you took the time to read and help me.
Click to expand...
Click to collapse
you flash it wihout authentication?
Related
Hi there, I have a Mi5 device that has:
* Bootloader Unlocked & Root
* Resurrection Remix, TWRP
I am going to give this device to someone else and I want to go back to MIUI ROM, stock recovery and have the bootloader locked again. What method should I use to do that, Fastboot? Thanks.
I cannot post links, so: google for following string: "Here - Xiaomi MIUI Official Forum" and open first result
There will be an official Xiaomi fastboot flashing guide.
You will need to dowload "Xiaomi Mi 5 Latest Global Stable Version Fastboot File"
SavageDamage said:
Hi there, I have a Mi5 device that has:
* Bootloader Unlocked & Root
* Resurrection Remix, TWRP
I am going to give this device to someone else and I want to go back to MIUI ROM, stock recovery and have the bootloader locked again. What method should I use to do that, Fastboot? Thanks.
Click to expand...
Click to collapse
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
There is an option in MiFlash tool to re-lock bootloader
serrj said:
I cannot post links, so: google for following string: "Here - Xiaomi MIUI Official Forum" and open first result
There will be an official Xiaomi fastboot flashing guide.
You will need to dowload "Xiaomi Mi 5 Latest Global Stable Version Fastboot File"
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
There is an option in MiFlash tool to re-lock bootloader
Click to expand...
Click to collapse
Thanks for that. It worked.
Here I present you my toolkit for flashing TWRP and rooing Redmi Y2/S2/YSL.
Requirements
1. PC
2. Fastboot Drivers
3. Unlocked Bootloader (Guide)
4. Flashing TWRP Toolkit
5. Magisk flashable file
Steps for Flashing TWRP
1. Download the file. Link given in the end of the threads.
2. Boot your device into Fastboot mode (in power off state press power button + volume down button).
3. Connect your device from pc.
4. Now open the downloaded folder and run the file "Flash.bat".
5. Then press any key to continue.
6. Now your phone will automatically boot into TWRP.
7. Now you have sucessfully flashed Twrp.8. Before rebooting your device do flash lazyflasher-no-verity-opt-encrypt.zip.
Note :-
* If you don't flash Lazy Flasher then the Custom recovery will be replaced with stock recovery in next Boot.
Steps for Rooting
1. Download and place the Magisk zip fiile into your device.
2. Boot your device into TWRP Recovery (in power off state press power button + volume up button).
3. Select the option of 'Install' and then locate the directory where you have placed the Magisk file and select it.
4. After selecting the file, swipe the arrow loacted at the bottom.
5. When the flashing is completed click on 'Reboot System'.
6. After the phone has booted successfully install magisk apk.
Congrats you have rooted your device !!
Note :-
* This is Exclusively for Redmi Y2/S2/YSL and if you try this on any other device probably you may be bricking your device!!
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* First boot may take upto 15-20 mins. So don't panic.
Links :-
* TWRP Toolkit - Click here
* Lazy Flasher - Click here
* Magisk - Click here
will try this as soon i am able to unlock my bootloader, thanks!
(i hate xiaomi for locking the device for 1 month....!! )
Flashing LF ends in endless boot. No loop but endles bootscreen 1,2,3 dots endlessly! Any ideas ?
So I got stuck on Bootscreen.
I flashed MIUI with TWRP and was back on stockrom with stockrecovery.
Then I booted TWRP temporarely with ADB. (adb command: fastboot boot twrp.img )
Now I installed Magisk and I am happy now
Just DON´T install TWRP. Boot it temporarely !
I used MIUI from here: https://www.theandroidsoul.com/download-miui-10/
Screen asking for PASSWORD.
The TWRP screen asks for password. Default password does not work and after format data the files are not displayed. Same case in clicking cancel.
use xiaomi eu roms they dont ask twrp password
twrp password
Twrp asks for password. What kind of password is this? How to use twrp without the password? How to use this twrp?
Has anybody got rooted redmi s2 finally?
In particular, with stock rom?
finally yes
When TWIRP asks for password nothing helps. The only thing I could do is to wipe ALL THE PARTITIONS except for external SD card, of course. Yes , you loose everything on your phone. Now, you flash the ROM you want (I flashed the stock ROM). After that, you flash the Magisk file. It is important not to reboot in between. After rebooting you have the new system installed. After initial configuration, you have to manually install the Magisk Manager apk.
P.S. the Lazy thing is not needed. TWRP persists.
Want mbn file of unlock bootloader redmi y2
i need emmc_appsboot.mbn file of unlocked Redmi y2(s2) 's bootloader.
If someone has unlocked y2 then please send me the file.
This TWRP for Custom ROM, and if you flash on RI MIUI will not work with any method as well. Especially if you Flash LazyFlaser will certainly be bootloop (stuck on logo)
sumit17 said:
i need emmc_appsboot.mbn file of unlocked Redmi y2(s2) 's bootloader.
If someone has unlocked y2 then please send me the file.
Click to expand...
Click to collapse
for bypass UBL you can try this
Pass : firmware firmware27
danigp75 said:
for bypass UBL you can try this
Pass : firmware firmware27
Click to expand...
Click to collapse
It will bypass only or unlock it too?
sumit17 said:
It will bypass only or unlock it too?
Click to expand...
Click to collapse
unlock too
danigp75 said:
unlock too
Click to expand...
Click to collapse
Bro it is unable to detect my device. But adb commans are recognizing my device and Mi Unlock tool also detect my device.
But this Soft is not able to detect my device. Giving me error
sumit17 said:
Bro it is unable to detect my device. But adb commans are recognizing my device and Mi Unlock tool also detect my device.
But this Soft is not able to detect my device. Giving me error
Click to expand...
Click to collapse
to be able to use this application you must enter EDL mode or "TEST POINT". After devices are detected 9008 on PC, proceed with running the application. Don't forget to enter the "firmware27" password.
Hopefully it can help for UBL redmi YSL without having an official UBL.
danigp75 said:
to be able to use this application you must enter EDL mode or "TEST POINT". After devices are detected 9008 on PC, proceed with running the application. Don't forget to enter the "firmware27" password.
Hopefully it can help for UBL redmi YSL without having an official UBL.
Click to expand...
Click to collapse
For test points i have to dissemble my device. Lol, If you can give me emmc_appsboot.Mbn from unlocked device then it may can help me.
Skyfire1 said:
So I got stuck on Bootscreen.
I flashed MIUI with TWRP and was back on stockrom with stockrecovery.
Then I booted TWRP temporarely with ADB. (adb command: fastboot boot twrp.img )
Now I installed Magisk and I am happy now
Just DON´T install TWRP. Boot it temporarely !
I used MIUI from here: https://www.theandroidsoul.com/download-miui-10/
Click to expand...
Click to collapse
from where did you downloaded the ROM ?
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
shiva sandeep said:
use xiaomi eu roms they dont ask twrp password
Click to expand...
Click to collapse
Where can I download the EU roms ?
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
Novikovmex said:
When TWIRP asks for password nothing helps. The only thing I could do is to wipe ALL THE PARTITIONS except for external SD card, of course. Yes , you loose everything on your phone. Now, you flash the ROM you want (I flashed the stock ROM). After that, you flash the Magisk file. It is important not to reboot in between. After rebooting you have the new system installed. After initial configuration, you have to manually install the Magisk Manager apk.
P.S. the Lazy thing is not needed. TWRP persists.
Click to expand...
Click to collapse
from where did you download the rom ?
Israelleite said:
from where did you downloaded the ROM ?
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
Where can I download the EU roms ?
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
from where did you download the rom ?
Click to expand...
Click to collapse
From the official Xiaomi site
Israelleite said:
from where did you downloaded the ROM ?
Click to expand...
Click to collapse
The link is in the quote in the line above your question. Or am I misunderstanding you ?
https://www.theandroidsoul.com/download-miui-10/
It is about midpage, the last in the list of phones, just above the section where it says
"How to install the MIUI 10 update"
Title.
soygogeta4 said:
Title.
Click to expand...
Click to collapse
Yes with command set active_b or a i am not sure if command is correct check it on Google
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
And you have to reboot it to take effect successful
honey ghumaan01 said:
Yes with command set active_b or a i am not sure if command is correct check it on Google
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
And you have to reboot it to take effect successful
Click to expand...
Click to collapse
I know but can I do it without a PC?
soygogeta4 said:
I know but can I do it without a PC?
Click to expand...
Click to collapse
No, you will need custom recovery for that, pitch black is best one
honey ghumaan01 said:
No, you will need custom recovery for that, pitch black is best one
Click to expand...
Click to collapse
The problem is I updated Pixel Experience and after changing active slot on TWRP I now have the stock recovery
Hello
Same here after installing pixer experience when i try to go recovery , stock recovery come back , how to do , did i have to install twrp again or what?
fastboot --set-active=a
or b
this depends on version of fastboot but you can see all cmd by using "help"
alternatively just run :
fastboot boot recovery.img
***this will boot recovery without installing it but then you can install magisk or install a twrp recovery zip or you can change active slot in the reboot button or tab
**** obviously for this to work you need to put twrp in the fastboot / adb folder and rename it to recovery.img and also open cmd window there with aright click
I am new and I don't have much experience in custom rom, recovery, kernel etc. and I think I was wrong in some procedure.
I have a problem with my Moto E5 XT1944-3, I wanted to install the TWRP by following these steps:
https://forum.xda-developers.com/moto-e5/development/recovery-twrp-3-2-3-x-moto-e5-plus-t3912189
(I have the bootloader unlocked)
The inconvenience came when I restarted in recovery mode and the touch did not work (only in recovery mode), which led me to flash again twrp-x.x.x.x.img but still the same. What I ventured on the Internet to find solutions and simplifying, I ended up flashing the recovery img as follows: fastboot flash boot twrp-x.x.x.x.img (I guess the problems started there)
*The E5 did not turn on with the logo and did not start the OS, I tried to use the Lenovo tool to restore the E5 and it says that it is not compatible (maybe because of the unlocked bootloader) although it allowed you the option to search for it within the "compatible" smartphones . I tried from the fastboot tool to try to revive the E5 but it does not start the system. Nor does he let me use: fastboot erase system / data / recovery; to try to make a clean installation.
* The last thing I try is to reinstall the TWRP and try to use the USB-OTG with the mause, but, although it has electricity, the mause does not appear and if the screen is turned off and then on again it remains blank forcing me to a forced restart.
* Oh and download an AOSPEXTENDED ROM and install the img with fastboot and it didn't load the logo but the boot animation but it was just a loop
* Any idea what to do?
* I think that if the recovery worked correctly, I could solve this.
Greetings from Argentina using the google translator :dedos cruzados:
Did you flash the correct recovery? Your phone is the Moto E5 Nora variant
---------- Post added at 07:08 PM ---------- Previous post was at 07:04 PM ----------
And the command is like this:. fastboot flash recovery xxxxxc.bin
---------- Post added at 07:10 PM ---------- Previous post was at 07:08 PM ----------
Dont use fastboot flash boot or you will overwrite the bootloader
loco72 said:
Dont use fastboot flash boot or you will overwrite the bootloader
Click to expand...
Click to collapse
And fastboot flash bootloader... did you forgot? And remember, NEVER EVER use fastboot erase bootloader, as it will brick your device.
I need stock firmware for my Moto G6 XT1925-5 OPSS27.82-87-6
And compatible working and tested TWRP.
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?
Morricorne said:
I need stock firmware for my Moto G6 XT1925-5 OPSS27.82-87-6
And compatible working and tested TWRP.
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?
Click to expand...
Click to collapse
This is the signed firmware you are looking for:
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Official TWRP is available on https://eu.dl.twrp.me/ali/.
You should start with version 3.2.3-0 for your old Oreo build.
---------- Post added at 10:29 PM ---------- Previous post was at 10:22 PM ----------
Morricorne said:
I want to reflash this Phone, and get rid bootloader unlock warning.
Any help with that?
Click to expand...
Click to collapse
Try this tool for Windows
https://forum.xda-developers.com/moto-g/themes-apps/app-motorola-boot-logo-maker-source-t2848667/
In case of any problems with the tool I could repack a logo.bin with the images that you prefer.
WoKoschekk said:
This is the signed firmware you are looking for:
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Official TWRP is available on https://eu.dl.twrp.me/ali/.
You should start with version 3.2.3-0 for your old Oreo build.
Click to expand...
Click to collapse
Thanks for answear. I test this fw in next week.
Now im on official newest 9.0 for moto g6.
I find place with stock moto g6 firmware. Tried flash oldest 8.0 rom. But fastboot give me cannot downgrade message. Thats why i decided flash newest avaible fw.
I flashed official TWRP recovery for g6 too.
And try flash zip file. But i cant decrypt storage. And i have error with format data. I Just give up with remove Bootloader warning. And use stock 9.0
I dont have enough data package to download this fw. But i try this fw in future. Thanks for helpi just wanted only remove this Bootloader warning. Cause im buy this moto with already unlocked Bootloader. I have moto g5 too. With unlocked Bootloader. I replaced this warning with black moto logo. And its work. But i cant do the same thing with moto g6
Morricorne said:
Thanks for answear. I test this fw in next week.
Now im on official newest 9.0 for moto g6.
I find place with stock moto g6 firmware. Tried flash oldest 8.0 rom. But fastboot give me cannot downgrade message. Thats why i decided flash newest avaible fw.
I flashed official TWRP recovery for g6 too.
And try flash zip file. But i cant decrypt storage. And i have error with format data. I Just give up with remove Bootloader warning. And use stock 9.0
I dont have enough data package to download this fw. But i try this fw in future. Thanks for help
Click to expand...
Click to collapse
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
OK thanks i try this in next week
WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
Where i can find this disable forceencrypt zip?
Morricorne said:
Where i can find this disable forceencrypt zip?
Click to expand...
Click to collapse
https://github.com/Zackptg5/Disable...Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
WoKoschekk said:
Do not downgrade from Pie to Oreo! Once Pie is installed there is no way back to Oreo.
TWRP can't decrypt /data on Moto G6. Start TWRP, don't enter a password and hit cancel. Go to "Wipe > Format Data (do not use 'Advanced'!!) > type 'yes' and swipe to confirm".
Next reboot to recovery twice!
Now /data is unencrypted and you must flash the no-verity/disable_forceencrypt.zip in order to stay unencrypted. A reboot to system without that .zip will encrypt your /data again.
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Flashing newest Magisk v20.4 will cause a bootloop. Use v19.3 instead and update Magisk through Magisk Manager when v19.3 is installed without any issues.
Click to expand...
Click to collapse
Cant format data TWRP 3.3.1-0
Flashed decryption zip, magisk system start.
Can enter TWRP again.
Imei work but no Service.
Wtf?
Morricorne said:
Flashed decryption zip, magisk system start.
Can enter TWRP again.
Imei work but no Service.
Wtf?
Click to expand...
Click to collapse
It's not a decryption.zip, it's a forceencryption-disabler.
---------- Post added at 08:27 AM ---------- Previous post was at 08:20 AM ----------
I guess you don't reboot to system after flashing the stock ROM, do you?
One of the last fastboot commands was "fastboot erase userdata". The missing reboot command is the reason for your problem!
WoKoschekk said:
It's not a decryption.zip, it's a forceencryption-disabler.
---------- Post added at 08:27 AM ---------- Previous post was at 08:20 AM ----------
I guess you don't reboot to system after flashing the stock ROM, do you?
One of the last fastboot commands was "fastboot erase userdata". The missing reboot command is the reason for your problem!
Click to expand...
Click to collapse
Nope its a not compatible with android 9 version. I found this on xda
https://forum.xda-developers.com/moto-g6/help/service-root-t4004467
**** that. I reflash everything to Stock cause i dont need magisk and root. I only need get rid Bootloader Unlock warning. What i almost finished. Now i look for modified logo.bin
Morricorne said:
Nope its a not compatible with android 9 version. I found this on xda
https://forum.xda-developers.com/moto-g6/help/service-root-t4004467
**** that. I reflash everything to Stock cause i dont need magisk and root. I only need get rid Bootloader Unlock warning. What i almost finished. Now i look for modified logo.bin
Click to expand...
Click to collapse
Post a picture and I will convert it for you to a logo.bin
WoKoschekk said:
Post a picture and I will convert it for you to a logo.bin
Click to expand...
Click to collapse
I may send you original logo bin
I have this now
A resolution of 1080x2160 would be perfect.
---------- Post added at 09:44 AM ---------- Previous post was at 09:42 AM ----------
Morricorne said:
I may send you original logo bin
I have this now
Click to expand...
Click to collapse
Send it
WoKoschekk said:
A resolution of 1080x2160 would be perfect.
---------- Post added at 09:44 AM ---------- Previous post was at 09:42 AM ----------
Send it
Click to expand...
Click to collapse
Finished everything flashed. Bootlogo too. And i get ride unknown password when Phone boot too. I dont use any password. Then i dont know whats wrong. Phone ask me everytime when i reboot my device. Now this is gone. No more modding moto g6. Better is stay on stable working stock. Then cant use phone. Man what a day. Time to relax i almost throw this damn phone on the floor.