Hello all,
I'm sorry if my question is not new or if there are already other topics on this subject.
I lost my XT1078 after a downgrade from android 6.0 to 5.0.
The device does not turn on and not access the recovery mode.
Only the indication LED rises when connected to PC or charger.
The PC also recognizes the device as connected.
I would like to know, please, if anyone would know indicate where to find the bootloader (blankflash) file to recover the device.
Thank you in advance to anyone willing to help me.
Can you conect in fastboot?
No
Hi Ismael,
The device does not start in fastboot mode.
Hey guys, I need your help, I bricked my phone yesterday, and trying to solve it I used miflash, but now that the process finished my phone only vibrate and show a green light and then start a loop , and my pc wont recognizes my phone, somebody can help me please?
sorry for my bad english
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Uivalf39 said:
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Click to expand...
Click to collapse
So in the last days I bricked my z2 pro by closing the bootloader with a custom installed, and to solve the problem I put it in EDL mode and I used the flash mi, but now when I press the power button it just vibrates and flashes a green Led, but it does not turn on, I already tried several combinations of buttons to get into fastboot and nothing, and when I plugged the usb into the pc it shows nothing
I was just reinstalling the stock android ROM of my Lenovo K920 but accidentaly I downloaded a K910 ROM and installed it by QFIL. Now my smartphone won't boot at all, all shortcuts like VOLUME+/VOLUME- won't do anything to the smartphone and therefore I can't now enter QFIL mode (if i click on VOLUME UP and insert USB, QFIL never recognizes my smartphone).
I would like to know if there is a way to flash a ROM without pressing any button combinations? Or is there any other solution for this massive problem?
UPDATE: tried to disconnect battery but no success.
I really didn't want to lose my smartphone.
I need urgent help!
Thanks in advance.
Fortunately I could get there on my own. You have to put a metal material at the Test Point in the back of the Lenovo K920 connecting the two test point dots.
Then QFIL will recognize your smartphone in EDL mode and everything went as expected.
Hope this helps people with the same problem in the future.
Hello,
So I happen to somehow hard brick my huawei p10 via HiSuite while downgrading from EMUI 9.1.0.262 to 9.0.1.180 and to 8.0.0 (dont know which version). After phone finished downgrading to 8.0 its suddenly turned off and it wont turn back again. When I plug it to the charger the phone gets warm, while on computer (connected via usb) its recognized as fastboot device. I tried shorting testpoint but I couldnt get SERAIL recognition.
Please help me, I wanna save this bease I know it still has potential.. Huawei is so damn dumb when it comes to software support and firmware updates via PC unlike Xiaomi, Samsung whom have Odin and MiFlash.
its sad, big minus for huawei
kenzyyy said:
Hello,
So I happen to somehow hard brick my huawei p10 via HiSuite while downgrading from EMUI 9.1.0.262 to 9.0.1.180 and to 8.0.0 (dont know which version). After phone finished downgrading to 8.0 its suddenly turned off and it wont turn back again. When I plug it to the charger the phone gets warm, while on computer (connected via usb) its recognized as fastboot device. I tried shorting testpoint but I couldnt get SERAIL recognition.
Please help me, I wanna save this bease I know it still has potential.. Huawei is so damn dumb when it comes to software support and firmware updates via PC unlike Xiaomi, Samsung whom have Odin and MiFlash.
its sad, big minus for huawei
Click to expand...
Click to collapse
Tip for getting the testpoints to work:
* Disconnect the battery. You'll have to remove the plate over the battery connector.
* Plug in your USB cable to the phone - leave it disconnected from the computer.
* Short the testpoint.
* Plug the cable into the computer while keeping the testpoint shorted.
It should now come up in serial mode. You can, at your own risk, reconnect the battery now - I've never had a problem doing this, but the socket is now live so...
irony_delerium said:
Tip for getting the testpoints to work:
* Disconnect the battery. You'll have to remove the plate over the battery connector.
* Plug in your USB cable to the phone - leave it disconnected from the computer.
* Short the testpoint.
* Plug the cable into the computer while keeping the testpoint shorted.
It should now come up in serial mode. You can, at your own risk, reconnect the battery now - I've never had a problem doing this, but the socket is now live so...
Click to expand...
Click to collapse
Thanks for replying..
I get the testpoint working but after I get it to work PC doesn't recognize testpoint mode. I tried everything the phone is dead, it's stuck in fastboot..
I just want to get it to work it's all I want, I just want to flash any system on it I tried LINUX method but it's the same issue testpoint not recognized by PC other modes are recognized.
kenzyyy said:
Thanks for replying..
I get the testpoint working but after I get it to work PC doesn't recognize testpoint mode. I tried everything the phone is dead, it's stuck in fastboot..
I just want to get it to work it's all I want, I just want to flash any system on it I tried LINUX method but it's the same issue testpoint not recognized by PC other modes are recognized.
Click to expand...
Click to collapse
On Windows, you'll have to dig up some very specific drivers for the port.
On Linux, you need to make sure things like ModemManager aren't installed, as Linux directly recognizes the serial port exposed by the device, and if you have a package installed that tries autodetecting modems, it screws with the serial mode of the device - it's not terribly tolerant of protocol data that it doesn't understand.
irony_delerium said:
On Windows, you'll have to dig up some very specific drivers for the port.
On Linux, you need to make sure things like ModemManager aren't installed, as Linux directly recognizes the serial port exposed by the device, and if you have a package installed that tries autodetecting modems, it screws with the serial mode of the device - it's not terribly tolerant of protocol data that it doesn't understand.
Click to expand...
Click to collapse
Thank you again for replying.
Now I'm getting this in device manager (see picture)
So I've got this how in the heck do I get it working again? Is there any software that allows me to get it running? Plz don't recommend DC phoenix I've paid them and I didn't have so much luck with them..
:good:
kenzyyy said:
:good:
Click to expand...
Click to collapse
From there, you need to load the IDT mode fastboot, and then in theory you can reflash everything else.
Check elsewhere, I've seen a package floating around for restoring from a brick situation here. Otherwise, your choices are pretty much DC Phoenix or to go tracking down internal Huawei tools, as those are the only other pieces of software I know of for flashing the device back from such a brick situation.
irony_delerium said:
From there, you need to load the IDT mode fastboot, and then in theory you can reflash everything else.
Check elsewhere, I've seen a package floating around for restoring from a brick situation here. Otherwise, your choices are pretty much DC Phoenix or to go tracking down internal Huawei tools, as those are the only other pieces of software I know of for flashing the device back from such a brick situation.
Click to expand...
Click to collapse
How can I find it? I have found this thread currently I am downloading all necessary files + it's for Kirin 960 which is good I think. So do you think this will work? Here is the link: https://forum.xda-developers.com/mediapad-m5/how-to/downgrade-unbrick-huawei-device-methods-t3915693
U dont need hikey, just use image download tool 2.0.0.9
kikson112 said:
U dont need hikey, just use image download tool 2.0.0.9
Click to expand...
Click to collapse
So even if my device is recognized in fastboot and serial port (test point) mode it means I can unbrick it with Image Download Tool by flashing stock firmware? Cause my device is super duper dead black screen stuck in fastboot tried every single key combination plus I've let it charge for 2 nights still nothing and PC still recognizes in fastboot only..
EDIT: My bootloader is locked.
Thanks for replying btw! :highfive:
writing by idm is from test point usb com 1.0, i cant promis u that all goes well, probably imei will gone, beckup oem info from fastboot it may be help for future,
and if all goes bad, u cant do anythink more, feel free to contact me
kenzyyy said:
So even if my device is recognized in fastboot and serial port (test point) mode it means I can unbrick it with Image Download Tool by flashing stock firmware? Cause my device is super duper dead black screen stuck in fastboot tried every single key combination plus I've let it charge for 2 nights still nothing and PC still recognizes in fastboot only..
EDIT: My bootloader is locked.
Thanks for replying btw! :highfive:
Click to expand...
Click to collapse
3 Step Game
1st Write Board Firmware By Furious Gold Or DC Phoenix & Free TOOL IDT 2.0.0.9
2nd When Phone Powered On write Oem Info Model: VTR-L29 Vendor: hw , Country: eu
3rd Flash Stock Firmware 9.1 Or 9.0 ( C432 )
Game Over
if you need board firmware or stock firmware let me know
imeicodes said:
3 Step Game
1st Write Board Firmware By Furious Gold Or DC Phoenix & Free TOOL IDT 2.0.0.9
2nd When Phone Powered On write Oem Info Model: VTR-L29 Vendor: hw , Country: eu
3rd Flash Stock Firmware 9.1 Or 9.0 ( C432 )
Game Over
if you need board firmware or stock firmware let me know
Click to expand...
Click to collapse
Could you please post the necessary FW for P10 VTR-L29 9.0.1.185(C432E1R1P9)?
As I understand it would be the firmware with XML so i can use the Image download tool to flash it?
Thank you
Hi i got an ASUS ROG 3 I003DD ZS661KS - 6A017CN TENCENT edition bricked while updating any solution? I tried everything from computer but not opening at all, screen total black and no recovery mode starts,
Any help is appreciated
what is the device showing identified as under device manager when plugged in from the side port?
Nothing black screen, i tried up down button and power but nothing, few days ago recovery mode worked now nothing.. i tried to look some programm for force boot the phone through pc but all websites link are empty, I don’t know what to do.. i was updating the phone then this happened..
Get the device in EDL mode with working Qualcom drivers and a good connection to your pc. Then follow below guide, all needed looks to be there. You can get the device in EDL mode with a flash cable that you can buy cheap or make one yourself from a USB cable - there are guides online for doing that too.
[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021]
Unbrick your ASUS ROG Phone 3 for free!! Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself. I noticed some people in the community charging upto 50$ for the firmware which should've been free from...
forum.xda-developers.com
I connected the phone with EDL cable the computer recognize as Qualcom device etc.. but
i tried to flash the raw stock firmware trough pc and EDL cable but nothing says Sahara error mode while the process