Database Develop

[Recovery][BKL][EMUI 8.x][Unofficial]TWRP 3.2.1-0 working recovery from View 10

Backup your stock recovery per this post. If you are too lazy, I can upload my backup from .104 build (C432) to Mega.
Download twrp_bkl_0.7.img from this post and place it in same directory with your ADB.
After successful backup as precaution disable any locks like pattern/PIN/password/fingerprint, reboot to bootloader (fastboot):
Code:
adb reboot bootloader
Then flash new TWRP recovery:
Code:
fastboot flash recovery_ramdisk twrp_bkl_0.7.img
After successful flash reboot device and immediately after confirming command below unplug USB cable and HOLD and keep holding VOLUME UP button, if you won't the new recovery will be overwritten by stock and you can try again.
Code:
fastboot reboot
Tested by myself on Honor 10 8.1.0.104 (C432) with unlocked bootloader and installed already Magisk 16.4 with Magisk manager 5.7.0, Magisk ramdisk persisted after installing TWRP recovery, system boots normal.
Next step after unlocking BL, installing Magisk, installing TWRP recovery -> flashing GSI AOSP, LOS or RR. Only reason I bothered with installing TWRP was that GSI image of LOS and RR don't include opengapps, only AOSP does, so without TWRP you can't have opengapps with these two GSI ROMS.

PeterMarkoff said:
Backup your stock recovery per this post. If you are too lazy, I can upload my backup from .104 build (C432) to Mega.
Download twrp_bkl_0.7.img from this post and place it in same directory with your ADB.
After successful backup as precaution disable any locks like pattern/PIN/password/fingerprint, reboot to bootloader (fastboot):
Code:
adb reboot bootloader
Then flash new TWRP recovery:
Code:
fastboot flash recovery_ramdisk twrp_bkl_0.7.img
After successful flash reboot device and immediately after confirming command below unplug USB cable and HOLD and keep holding VOLUME UP button, if you won't the new recovery will be overwritten by stock and you can try again.
Code:
fastboot reboot
Tested by myself on Honor 10 8.1.0.104 (C432) with unlocked bootloader and installed already Magisk 16.4 with Magisk manager 5.7.0, Magisk ramdisk persisted after installing TWRP recovery, system boots normal.
Next step after unlocking BL, installing Magisk, installing TWRP recovery -> flashing GSI AOSP, LOS or RR. Only reason I bothered with installing TWRP was that GSI image of LOS and RR don't include opengapps, only AOSP does, so without TWRP you can't have opengapps with these two GSI ROMS.
Click to expand...
Click to collapse
Nice work. ?

tried to install GSI RR OS, but ending in bootloop, also even after resizing system partition to maximum (TWRP / wipe / resize) opengapps still showing error 70 about insufficient space (which makes no sense, so they really seem to have wrong detection of A/B instead of A for Huawei/Honor devices), though these gzr gapps seem to install successfuly, now if I could figure out the damn bootloop
potential reasons for bootloop - previously installed magisk, wiped also system not only data/cache, installed through fastboot while TWRP there and not only stock recovery, ???
edit: i guess will try flash GSI through TWRP again, quite a waste time to wait each time like 9-10 minutes to find out it can't boot
edit 2: so even flashing through TWRP doesn't help, just stuck on android animation for 10 minutes and then it restarts (and even if you do fatory reset through huawei erecovery it doesnt change anything). maybe can try to restore everything and not wipe system before installing, just factory reset through TWRP (though I remember I read somewhere it's not reliable and it is better to do it through system, but I think that one wipe also internal storage which I wanna avoid)? back to rooted EMUI with TWRP for now, don't have time to try various combinations
edit 3: flashing over TWRP backup without wiping system doesn't help, so it seem it's gonna be magisk or replaced stock recovery i guess, otherwise no idea

BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?

PeterMarkoff said:
BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?
Click to expand...
Click to collapse
Don't be disappointed the lack of feedback from users is not many power users have got their hands on this model.
And also we are having different builds.
From the day one I am trying to rebrand my device but no success .
Once I have rebranded to EU I will try and let you know.
Did you flash open gapps nano package through twrp in gsi image?
Did it give you the same error?

tried just pico opengapps as on all phones i flash, that's the smallest, but always end up with error 70 not enough space despite resized system partition in TWRP and many GB available, the other unofficial GZR zero gapps build i mentioned seem to be flashed successful in TWRP, but in any case no luck with booting

PeterMarkoff said:
tried just pico opengapps as on all phones i flash, that's the smallest, but always end up with error 70 not enough space despite resized system partition in TWRP and many GB available, the other unofficial GZR zero gapps build i mentioned seem to be flashed successful in TWRP, but in any case no luck with booting
Click to expand...
Click to collapse
Did you format your phone before trying GSI ?
Try formatting phone and remove some system apps and then flash gapps it will mostly solve the problem.

PeterMarkoff said:
BTW the lack of feedback here and trying from other users it's very depressing. they boasted million phone sales and i am the only one in the whole world trying to install TWRP and GSI ROM on this phone?
Click to expand...
Click to collapse
Don't be upset – e.g. I didn't receive my Honor 10 yet. You won't be the only one for sure, you're just the first one to do it, which is super nice for others because it motivates them to do so as well!
Just wondering: does it make a difference for TWRP wether I own the 6gb or 4gb version?

miststudent2011 said:
Did you format your phone before trying GSI ?
Try formatting phone and remove some system apps and then flash gapps it will mostly solve the problem.
Click to expand...
Click to collapse
I did factory reset (data, both cache) and also wiped system partition, gapps would be the least issue, as I said that GZR should work, but my system doesn't boot, no matter how times I wipe everything through TWRP or stock recovery after flashing system.img, since they say it's normal to hang at first boot and then wipe and then it should boot, but it doesn't work for me. also of course tried to power off phone since some people said it helps to do it after flashing. what I haven't done it's fastboot -w which should be some better wipe. some people say also you should remove magisk ramdisk, though I forgot to back up original, backed up just stock recovery. and also I haven't tried to flash everything with stock recovery, though first flash I did was through fastboot anyway and not through TWRP and it didn't make difference
so last few things left to try:
- fastboot -w for total wipe of data (better than TWRP? though it should be same as Format data in TWRP which wipe everything including internal storage which I wanna avoid since backing up 15GB TWRP backup file it's kinda annoying and my system has problem to do it)
- flash with stock recovery (I have backup, no big deal)
- remove magisk ramdisk and flash with stock ramdisk (forgot to make backup, can't replace)
though I am tired of it for now, spend last night like 4 hours dealing with it until 2AM and I also need to take care of children
vollkornbaguette said:
Don't be upset – e.g. I didn't receive my Honor 10 yet. You won't be the only one for sure, you're just the first one to do it, which is super nice for others because it motivates them to do so as well!
Just wondering: does it make a difference for TWRP wether I own the 6gb or 4gb version?
Click to expand...
Click to collapse
I don't think RAM has something to do with anything, but that sounds like Chinese version since EU has always 4GB and only difference is storage, so you will have different ROM

PeterMarkoff said:
(...)
so last few things left to try:
- fastboot -w for total wipe of data (better than TWRP?)
- flash with stock recovery (I have backup, no big deal)
- remove magisk ramdisk and flash with stock ramdisk (forgot to make backup, can't replace)
Click to expand...
Click to collapse
So I just read more about the GSI/Treble stuff and it said somewhere that modifications like Magisk probably lead to problems with the GSI flash.
Which is why I would try to get rid of the magisk ramdisk first.
I'm not an expert in this at all but maybe this helps.
---
PeterMarkoff said:
I don't think RAM has something to do with anything, but that sounds like Chinese version since EU has always 4GB and only difference is storage, so you will have different ROM
Click to expand...
Click to collapse
Indeed I bought the chinese 6gb RAM Version (hope this won't turn out as a big mistake)

vollkornbaguette said:
So I just read more about the GSI/Treble stuff and it said somewhere that modifications like Magisk probably lead to problems with the GSI flash.
"Your device is free of any heavy modifications such as the
Click to expand...
Click to collapse
yeah, now if someone could extract for me from 0.104 firmware for C432 that stock ramdisk, because I have some problems with mega to download it and I just need the stock ramdisk, nothing else, I have stock recovery backup but forgot to make ramdisk backup
edit: completely forgot there is option to "Completely uninstall" in Magisk manager, so tried it though even after restart with magisk manager missing i could still use root apps, so not sure how exactly this "complete uninstall" works, but anyway giving it a try after this and wiping data, installed system.img again, again wiped, rebooted and as usual loading and loading and nothing, seem can't further continue without copy of stock ramdisk to flash, tried downloading the big update from mega to extract it but it always fail for me to download, same with trying to copy my TWRP backup because for sure ain't gonna doi fastboot -w and setting up everything from scratch in case even this doesn't help, if I knew it works for sure and it will load new system which I will have to set up then no problem, but in this case...
edit 2: tried to replace magisk ramdisk with ramdisk from Honor View 10 BKL09 (same as our working TWRP) but it seem I end up after flashing it, wiping and flashing system.img in TWRP/erecovery bootloop, it's not showing android booting logo like before (but hey at least no need to wait 10 minutes to find it's fail) and either go to huawei ercovery, if I perform factory reset there then it boots to TWRP, but can't boot anywhere else besides these two

pass
I requested this image. Recovery has been established. When I enter the recovery, it requires a password to decrypt the system partition, I enter it (the same after switching on the phone), but a message is displayed that the password is incorrect. help me please.

told you in OP disable all passwords before flashing

PeterMarkoff said:
yeah, now if someone could extract for me from 0.104 firmware for C432 that stock ramdisk, because I have some problems with mega to download it and I just need the stock ramdisk, nothing else, I have stock recovery backup but forgot to make ramdisk backup
edit: completely forgot there is option to "Completely uninstall" in Magisk manager, so tried it though even after restart with magisk manager missing i could still use root apps, so not sure how exactly this "complete uninstall" works, but anyway giving it a try after this and wiping data, installed system.img again, again wiped, rebooted and as usual loading and loading and nothing, seem can't further continue without copy of stock ramdisk to flash, tried downloading the big update from mega to extract it but it always fail for me to download, same with trying to copy my TWRP backup because for sure ain't gonna doi fastboot -w and setting up everything from scratch in case even this doesn't help, if I knew it works for sure and it will load new system which I will have to set up then no problem, but in this case...
edit 2: tried to replace magisk ramdisk with ramdisk from Honor View 10 BKL09 (same as our working TWRP) but it seem I end up after flashing it, wiping and flashing system.img in TWRP/erecovery bootloop, it's not showing android booting logo like before (but hey at least no need to wait 10 minutes to find it's fail) and either go to huawei ercovery, if I perform factory reset there then it boots to TWRP, but can't boot anywhere else besides these two
Click to expand...
Click to collapse
If you want, i have all the files of the C432 update but idk in wich .zip, folder the ramdisk is stored.
I can send on several clouds.

PeterMarkoff said:
told you in OP disable all passwords before flashing
Click to expand...
Click to collapse
Hey did you restore your device are you still struck at boot screen?
If yes try this method.
https://forum.xda-developers.com/huawei-p20/development/rebrand-huawei-p20-eml-l29-eml-l09-t3779283

How to GO back to stock emui(India) after i flash a treble rom? Do i need to backup using some tool?

PLease someone tell me

srharshajava said:
PLease someone tell me
Click to expand...
Click to collapse
The problem is currently we don't have full
ROM to revert to stock and if we brick our device there is no proper way to revert to stock.
Our model even doesn't have SD card support.
Just wait for some time for someone to provide proper way.

When i flash a treble rom, I have a bootloop. I returned back with eRecovery directly on the phone.

miststudent2011 said:
The problem is currently we don't have full
ROM to revert to stock and if we brick our device there is no proper way to revert to stock.
Our model even doesn't have SD card support.
Just wait for some time for someone to provide proper way.
Click to expand...
Click to collapse
We do have a way to download full ROM.
http://pro-teammt.ru/firmware-database/?firmware_model=COL-L29C432
1. Search here for your exact model (change numbers after C432 to find ROM for your phone) and search for your rom version (B104 or B120)
2. Double click on "filelist" on the same row as FullOTA-MF
3. From filelist link menu download update.zip file (it should be really big, like 2+GB)
3. Extract UPDATE.APP file somewhere (eg. Desktop)
4. In settings of HuaweiUpdateExtractor (link: https://forum.xda-developers.com/showthread.php?t=2433454) uncheck "verify header checksum" and open UPDATE.APP
5. Extract any img (Be it ramdisk.img, ramdisk_recovery.img or system.img) file that you need from UPDATE.APP via HuaweiUpdateExtractor
You just got whoole stock rom and img files that you can flash. Tested by myself with flashing back original ramdisk, ramdisk_recovery and system.img and everything worked well.

Bring light into the darkness of encryption

Hi togehter,
I had some problems with flashing new custom roms and ended up in a bootloop with not being able to boot to recovery. This could be solved by flashing the stock image with the xiaomi flash tool.
Before I will fu up again I would like to bring some light into the darkness.
When coming from Stock Rom:
1. Unlock Bootloader -> done successfully
2. Flashed TWRP Recovery -> done successfully but storage (data) was encrypted
3. Flashed Magisk via Recovery -> done successfully (storage still encrypted)
from here I was happy using the Stock Rom with Root.
Now I started messing things up:
Because there are a few things that bother me about the stock rom i wanted to use lineageOS/Pixel Experience. So I proceeded as following:
1. Backup my data (still have to enter key when starting twrp to decrypt the storage) -> done successfully
2. Flash LineageOS -> resulted in bootloop to TWRP
When entering twrp there was no query about the key and data where encrypted. Also the Backup was not accessible .
3. I used all in one tool to erase storage and decrypt data. -> successfully... Now i was able to place data on the internal storage again and start flashing a rom
4. Flashing LineageOS -> done successfully and able to boot into rom
Back to TWRP data was encrypted and I had to enter key.
5. Flashing remove force encryption script via twrp. -> done but now i was facing boot to black screen. TWRP was not working anymore.
Only way to get it work again, was flashing stock image.
Why is the data system always encrypted. This is rly annoying and backups don't work, because i can not encrypt them. Also, I can not put any files on the memory because it is encrypted.
I would rly like to try a custom rom, but I would also like to be able to go back to a backup. What have i done wrong?

You have to flash no dm verify right after formatting data & flashing rom. Don't let it boot.
I would recommend using the stock firmware. Los/AOSP is rubbish for our device, it's too unstable, lacking features and has worse gestures.

SeppGoPro said:
Hi togehter,
.... What have i done wrong?
Click to expand...
Click to collapse
You need to format data (not just wipe data) in TWRP. Some people suggest before flashing a ROM and some say after, but I don't think it makes a great deal of difference either way.
Make sure you either flash the appropriate firmware and vendor recommended, or the fastboot ROM of that version.
Then in TWRP wipe cache and dalvik, then format data.
Reboot into TWRP, or unmount and mount the data partition in TWRP so it correctly reads the data partition.
Copy across the ROM (and GApps if needed)
Them flash.
Boot into the ROM and you should be good.
After initial setup, if you want root, boot into TWRP and flash Magisk.
From here, if you've set a pin on the ROM, you'll be encrypted, but everything should still work normally. You should be able to access everything normally in TWRP and also perform backups. You should be able to got data across from/to a PC normally.
Turbine1991 said:
You have to flash no dm verify right after formatting data & flashing rom. Don't let it boot.
I would recommend using the stock firmware. Los/AOSP is rubbish for our device, it's too unstable, lacking features and has worse gestures.
Click to expand...
Click to collapse
Not true in many ways.
There is need to flash no dm verity. It's one way of solving the issue, but it's not the only way. You should only do this if you know what it's for and if you know you want this.
AOSP ROMs are not unstable. I've been using them on mine for over 4 months. None are perfect and they have a few minor issues/bugs, but they are far from being considered unstable. I've never had shutdowns, reboots or FC'S.

Thanks for the replies.
Robbo.5000 said:
Make sure you either flash the appropriate firmware and vendor recommended, or the fastboot ROM of that version.
Click to expand...
Click to collapse
So for example with LineageOS 17 I can use the global vendor and firmware, but sometimes in the thread it is recommended to use chinese vendor and firmware. In this case I should flash another vendor and firmware then the global one.
What do you mean with a fastboot rom. How can I identify one of them?
Is the MiuiMix Rom a fastboot rom. This one changed my vendor and firmware. After flashing this rom, my bootlogo changed to redmi... Am i right with this suggestion?

SeppGoPro said:
Thanks for the replies.
So for example with LineageOS 17 I can use the global vendor and firmware, but sometimes in the thread it is recommended to use chinese vendor and firmware. In this case I should flash another vendor and firmware then the global one.
What do you mean with a fastboot rom. How can I identify one of them?
Is the MiuiMix Rom a fastboot rom. This one changed my vendor and firmware. After flashing this rom, my bootlogo changed to redmi... Am i right with this suggestion?
Click to expand...
Click to collapse
Fastboot ROMs are official ROMs that are flashed through the Mi Flash Tool
, with the phone booted into fastboot mode and connected to the PC. They contains almost all partitions, including vendor and all firmware. They will be a .tgz file. They are mainly used as an almost failsafe way to recover the phone, should you mess things up. Flashing them will restore the phone to factory, so will lose TWRP, but you're guaranteed a clean starting point.
If, for example, you want to install Havoc 3, it is recommended to flash it on top of either China or India 10.4 vendor and firmware. So if you're phone is currently on global firmware, you would then need to flash, say, Chinese firmware and vendor flies, before flashing Havoc.
If you have been previously flashing other mods, such as 75Hz, screen refresh rate, for example, then you might choose to flash the official Chinese fastboot ROM, instead of just the firmware and vendor, to ensure that you've cleaned the phone of any mods, etc. In most cases you will be fine flashing firmware and vendor, though.
Miuimix is a custom ROM, which is based on the official China MIUI ROM. Because it's based on the China ROM this is why the logo changed to Redmi.

Robbo.5000 said:
Miuimix is a custom ROM, which is based on the official China MIUI ROM. Because it's based on the China ROM this is why the logo changed to Redmi.
Click to expand...
Click to collapse
So in this case, i can just flash this rom and there is no need of flashing a diffrent vendor or firmware.
So final question: I'm happy with the stock rom plus root. I would like to try a custom rom but I'm not willing to go through the whole installtion procedure again. Is there a way of making a backup and keeping it?
When I backup the stock rom right now, the backup will ne encrypted again...When I formate the data, all my data will be gone again ?

Custom Rom flashing problem.

Okay. Am currently on MIUI 11.0.3 (the latest one available for RaphaelIN)
So, the problem am facing is that, when i flash a custom rom, my phone gets rebooted to recovery and sometimes to fastboot(this happens occasionally) and i just simply cant get the rom to load.
Sometimes my phone gets into a state which resembles hardbrick (none of the buttons work, even holding the power button for 10secs doesn't) and after sometimes, usually 15 to 20 mins it restarts itself. This has happened thrice till date and all while booting to system.
The Roms i have tried-
-Pixel experience (unofficial) (android Q)
- Lineage OS 17 (unofficial)
- Havoc OS (both official and unofficial) (both pie and Q versions)
-MIUI (European rom)
I have also tried flashing the chinese, indian and global vendor (all done separately) thinking it was a vendor issue, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking was done through the official method and the official app.
Any solutions for this problem and has anyone faced these problems or is it only me?

Astrek said:
Okay. Am currently on MIUI 11.0.3 (the latest one available for RaphaelIN)
So, the problem am facing is that, when i flash a custom rom, my phone gets rebooted to recovery and sometimes to fastboot(this happens occasionally) and i just simply cant get the rom to load.
Sometimes my phone gets into a state which resembles hardbrick (none of the buttons work, even holding the power button for 10secs doesn't) and after sometimes, usually 15 to 20 mins it restarts itself. This has happened thrice till date and all while booting to system.
The Roms i have tried-
-Pixel experience (unofficial) (android Q)
- Lineage OS 17 (unofficial)
- Havoc OS (both official and unofficial) (both pie and Q versions)
-MIUI (European rom)
I have also tried flashing the chinese, indian and global vendor (all done separately) thinking it was a vendor issue, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking was done through the official method and the official app.
Any solutions for this problem and has anyone faced these problems or is it only me?
Click to expand...
Click to collapse
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.

You didn't format data that's why your rom doesn't boot. Follow Robbos nice guide and you are good to go.:good:

Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
Thnx for the guide. i will do this within a day or two and update you if it worked or not.

Kollachi said:
You didn't format data that's why your rom doesn't boot. Follow Robbos nice guide and you are good to go.:good:
Click to expand...
Click to collapse
I did format the data partition coz that's one thing I and my friends always do when flashing new rom. I don't exactly remember but i think, the pseudo hardbrick thingy started after i formatted the system, data, cache & internal storage.
I will follow Robbos guide adn keep you guys updated on what happened.

Astrek said:
I did format the data partition coz that's one thing I and my friends always do when flashing new rom. I don't exactly remember but i think, the pseudo hardbrick thingy started after i formatted the system, data, cache & internal storage.
I will follow Robbos guide adn keep you guys updated on what happened.
Click to expand...
Click to collapse
Format data = (you will need to type in "yes")
Note: Format data or wipe data isn't the same thing.

Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
Ohhh *****...!!!! It ****ing worked!!!! Though i made some mistakes like clean all and lock in first step, but was able to unlock bootloader almost instantly, no idea why but i can almost instantly unlock certain mi phone's bootloader instantly. But a lot of thanx for taking your time and writing this up... You really saved me from being stuck in MIUI forever!
A lot of thnx.... and also happy new year... 1st day of 2020 went quite well for me all thnx to you and i hope yours goes well too.!

Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
thanks for help
but no work for me
after flash rom and reboot booting to twrp auto..

Kollachi said:
Format data = (you will need to type in "yes")
Note: Format data or wipe data isn't the same thing.
Click to expand...
Click to collapse
many times the tiniest msg has the greatest significance. thanks mate!!!

Guys i need your help,, i flashed my phones custom Rom tecno 7cs using sp flashing tool.
That worked and it showed the tick icon on my pc.
The problem is that it does nothing to my phone because the software issues are still there
my phone keeps restarting itself almost all the time and sometimes won't even boot it takes longer to boot,,, apps keep on crushing and many more.AM tired am going to break it and throw it if i don't get solutions asap!
So the flashing process only wiped data on the phone nothing else whatsoever.
tecno 7cs p121 Bi safaricom ke 20151111

Can't boot into new rom

I have TWRP on my Mi 9T Pro but whenever I try to boot into a new rom it just boots back into TWRP, I think it's because I accidentally wiped everything including my kernel, but I'm not entirely sure, there's no errors when I try to install one, I've tried multiple, my phone doesn't have an OS installed ATM, no MiUI, I've tried flashing stock rom but that also doesn't work. I really don't know what to do.

sternje said:
I have TWRP on my Mi 9T Pro but whenever I try to boot into a new rom it just boots back into TWRP, I think it's because I accidentally wiped everything including my kernel, but I'm not entirely sure, there's no errors when I try to install one, I've tried multiple, my phone doesn't have an OS installed ATM, no MiUI, I've tried flashing stock rom but that also doesn't work. I really don't know what to do.
Click to expand...
Click to collapse
Restore MIUI by flashing a MIUI fastboot ROM.
Get the fastboot ROM from here
https://xiaomifirmwareupdater.com/miui/raphael/
Choose the fastboot ROM for the phone you have (European or Global). Make sure it is a fastboot ROM, not a recovery ROM.
Use this guide to flash it
https://c.mi.com/oc/miuidownload/detail?guide=2
View the page in desktop mode if viewing on a phone.
In step 5 make sure you change flash option to 'clean all' before hitting flash. This is three radio button options at the bottom of the flash tool. The default locks the bootloader, so you need to change it to keep the bootloader unlocked.
After doing this boot into MIUI at least once before trying to install something again.
When flashing a custom ROM over MIUI you need to format data in TWRP.
After installing TWRP, boot into it a do the following.
Perform a factory reset.
Format data - make sure you format, not wipe, need to type 'yes' to confirm.
Reboot back into TWRP - this makes sure the data partition is properly mounted after formatting.
Now flash the ROM you want and GApps if needed.
Reboot to system and it should be good.
Flash Magisk if needed.
Do not wipe anything else in TWRP. It's not needed.

sternje said:
I have TWRP on my Mi 9T Pro but whenever I try to boot into a new rom it just boots back into TWRP, I think it's because I accidentally wiped everything including my kernel, but I'm not entirely sure, there's no errors when I try to install one, I've tried multiple, my phone doesn't have an OS installed ATM, no MiUI, I've tried flashing stock rom but that also doesn't work. I really don't know what to do.
Click to expand...
Click to collapse
First Learn Basics while messing with your device.
Kernel is a part of ROM's Zip,
So even if you wiped kernel(so called boot), it will again gets re flashed with new ROM.
Second your problem is,
You are booting into wrong partition.
I am not sure , what you did.
But Mi9TPro has two partitions, Google's new A/B partition table for Android.
And you may have wiped both Flashed A(example) and booting into B.
Therefore it is not booting properly.
Ask in Telegram group for faster solution.
Or wait here for better solution in reply.
OR
Simply flash Fastboot,
And then try everything again.
Ans from next time, read everything step carefully and then proceed.
Sent from my Redmi K20 Pro using Tapatalk

itspdp said:
First Learn Basics while messing with your device.
Kernel is a part of ROM's Zip,
So even if you wiped kernel(so called boot), it will again gets re flashed with new ROM.
Second your problem is,
You are booting into wrong partition.
I am not sure , what you did.
But Mi9TPro has two partitions, Google's new A/B partition table for Android.
And you may have wiped both Flashed A(example) and booting into B.
Therefore it is not booting properly.
Ask in Telegram group for faster solution.
Or wait here for better solution in reply.
OR
Simply flash Fastboot,
And then try everything again.
Ans from next time, read everything step carefully and then proceed.
Click to expand...
Click to collapse
This phone does not have A/B partitions.

Robbo.5000 said:
This phone does not have A/B partitions.
Click to expand...
Click to collapse
It has, but you can't see then normally in twrp.
Ask in telegram group for fast solution.
And please do read about android partition tables feom android oreo.
Sent from my Redmi K20 Pro using Tapatalk

itspdp said:
It has, but you can't see then normally in twrp.
Ask in telegram group for fast solution.
And please do read about android partition tables feom android oreo.
Click to expand...
Click to collapse
It's an A only, system as root device. It is not an A/B device.
This is why MIUI updates need to be installed in system recovery. It does not install updates when the system is live.

if it's booting back into twrp. It's usually one of the three mistakes.
1. wrong vendor
2. didnt flash dfe
3. flashed dfe for stock rom
4. encrypted, so format data partition.
you can follow the guide: https://forum.xda-developers.com/k20-pro/how-to/simple-beginners-guide-to-raphaelin-t4020543
also, k20p is A partition only, not dual.
kernel is included with rom.
ask in telegram group for faster replies.

Sandeeep Kiran said:
if it's booting back into twrp. It's usually one of the three mistakes.
1. wrong vendor
2. didnt flash dfe
3. flashed dfe for stock rom
4. encrypted, so format data partition.
you can follow the guide: https://forum.xda-developers.com/k20-pro/how-to/simple-beginners-guide-to-raphaelin-t4020543
also, k20p is A partition only, not dual.
ask in telegram group for faster replies.
Click to expand...
Click to collapse
You don't need to flash dfe. I've not yet come across a situation where it is required. Flashing dfe will make life easier, at the cost of greatly reduced security, but there are always options to do what you want without flashing dfe.

Robbo.5000 said:
You don't need to flash dfe. I've not yet come across a situation where it is required. Flashing dfe will make life easier, at the cost of greatly reduced security, but there are always options to do what you want without flashing dfe.
Click to expand...
Click to collapse
It's required for oss based builds now.

GUIDE How to Instal GSI ROM- Havoc-OS-v4.X-Official Android 11 On Redmi 8

Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com

Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer

letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....

letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery

D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry

Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !

Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer

UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...

letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?

letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems

Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...

letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)

Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...

Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .

Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.

letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse

Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .

Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?

mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11

letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.