Hi all, I bought a Redmi K20 Pro 'Global' version from AliExpress awhile ago without knowing that the 'Global' rom was not official. Currently my bootloader is unlocked and I am running Miui 10.3.15.0(PFKINXM).
Is there a comprehensive guide on how to flash from my current rom to Miui 11 EU? I'm a newbie to all of this.
I've seen you need to flash the Chinese rom before flashing to another, is this correct?
I feel mislead by AliExpress but then again I got what I paid for really.
Any help would be greatly appreciated!
I have the same case. I need help too.
i had the same case, i just flashed the indian 10.3.5 on my unlocked boatloader phone without the complicated procedures of re-locking and re-unlocking
i'm waiting for the Indian miui 11 as i read somewhere that EU roms replaced xiaomi apps with google apps
Don't bother relocking once you've unlocked, it can brick a device and it does not mean you can return the phone and be covered under warranty (flash bit).
This is how to flash the miui eu rom:
1) Download adb minimal here
2) Install to 'c:/adb' to avoid any spaces in the path.
3) Download twrp for the k20 pro here 3.3.1-15 latest
4) Save as twrp.img inside c:/adb
5) Shutdown phone. Press power down and then the power button until download mode appears.
6) Plug in phone to pc.
7) Open cmd from start and type 'cd c:/adb'
8) Type and enter 'fastboot flash recovery twrp.img'
9) It'll then flash. TWRP is now installed. To boot into twrp recovery power down, then hold volume up and power.
Now to install the rom, this is all you have to do each time you want to install a rom:
1) Download 'xiaomi.eu_multi_HMK20ProMI9TPro_V11.0.2.0.QFKCNXM_v11-10.zip' from here
2) Boot into twrp recovery with the 9th step above.
3) Go Install, find the zip file you downloaded in step 1 and swipe to install.
4) Reboot.
5) Give it 15 mins to boot, if it doesn't or constantly restarts boot into twrp recovery, backup all of your files to keep into your pc (plug it in), go wipe and format data (type in what it asks), flash the zip file and restart. You'll probably want to do this step anyway when going from android 9 to 10 or chinese/miui rom to eu rom
Turbine1991 said:
Don't bother relocking once you've unlocked, it can brick a device and it does not mean you can return the phone and be covered under warranty (flash bit).
This is how to flash the miui eu rom:
1) Download adb minimal here
2) Install to 'c:/adb' to avoid any spaces in the path.
3) Download twrp for the k20 pro here 3.3.1-15 latest
4) Save as twrp.img inside c:/adb
5) Shutdown phone. Press power down and then the power button until download mode appears.
6) Plug in phone to pc.
7) Open cmd from start and type 'cd c:/adb'
8) Type and enter 'fastboot flash recovery twrp.img'
9) It'll then flash. TWRP is now installed. To boot into twrp recovery power down, then hold volume up and power.
Now to install the rom, this is all you have to do each time you want to install a rom:
1) Download 'xiaomi.eu_multi_HMK20ProMI9TPro_V11.0.2.0.QFKCNXM_v11-10.zip' from here
2) Boot into twrp recovery with the 9th step above.
3) Go Install, find the zip file you downloaded in step 1 and swipe to install.
4) Reboot.
5) Give it 15 mins to boot, if it doesn't or constantly restarts boot into twrp recovery, backup all of your files to keep into your pc (plug it in), go wipe and format data (type in what it asks), flash the zip file and restart. You'll probably want to do this step anyway when going from android 9 to 10 or chinese/miui rom to eu rom
Click to expand...
Click to collapse
This is a nice tutorial, but you might want to change one thing in step 9. You cannot power down the phone. Trying to do this will automatically boot into system, immediately overwriting TWRP. At this point you need to do power and vol+ whilst still in fastboot mode.
Related
I bought a nexus 6 on google play and I am on verizon. It is currently running 5.0 LNX07M.
Could some nice fellow please tell if if this is correct?
1. download wugfresh
2. download drivers
3. tick usb debug, oem unlock
4. unlock bootloader
5. flash no force encrypt
6. root
7. Trwp
8. Get Chroma/ or any other 5.1.1 rom and flash with gapps?
I'm espeically concerned if it is ok to unlock and root a 5.0 nexus 6 and then use twrp to flash a 5.1.1 rom. Should I first update the phone to 5.1 or something?
1. download and install adb/fastboot
2. boot into the bootloader and plug in via USB to your computer. depending on what your computer is running, it could download and install the driver by itself or you would have to.
3. fastboot OEM unlock unlocks the bootloader.
4. reboot and back into your bootloader.
5. flash twrp recovery
6. flash your custom kernel and SuperSU for root via twrp recovery.
7. only if you want to decrypt, format your storage. if not, just reboot.
simms22 said:
1. download and install adb/fastboot
2. boot into the bootloader and plug in via USB to your computer. depending on what your computer is running, it could download and install the driver by itself or you would have to.
3. fastboot OEM unlock unlocks the bootloader.
4. reboot and back into your bootloader.
5. flash twrp recovery
6. flash your custom kernel and SuperSU for root via twrp recovery.
7. only if you want to decrypt, format your storage. if not, just reboot.
Click to expand...
Click to collapse
Should I update my phone or is 5.0 ok for flashing the latest 5.1.1 rom?
Raymondlikesroot said:
Should I update my phone or is 5.0 ok for flashing the latest 5.1.1 rom?
Click to expand...
Click to collapse
if updating the official way, go to 5.1 then 5.1.1. but if updating via custom ROM, it doesnt matter, you can flash 5.1.1 over 5.0
IMHO,
1) download Android SDK or minimal fastboot and ADB or 15 second ADB and fastboot installer
2) connect to PC and reboot to bootloader
3) from command prompt:
fastboot devices
(Serial number shows up)
4) From command:
fastboot oem unlock
fastboot reboot
5) Download the latest TWRP recovery for shamu
6) Boot back to bootloader and from command (having placed the TWRP image somewhere where fastboot can find it i.e. in platform tools in SDK) also rename it to twrp.img
Issue the command:
fastboot flash recovery twrp.img
(Be careful to not have it list the file ext. twice. Windows names the file ext. by default. Example: twrp.img.img
After recovery flashes, from bootloader, use the volume keys to select recovery mode and press power. Your device will boot to TWRP.
Make a backup!
Next, download SuperSU zip and flash with TWRP.
Congratulations, you are now stock rooted and you can choose any ROM you like and flash with TWRP. Follow the instructions carefully from the ROM OP and profit.
It may look complicated but trust me, it's not. The longest process will be after you unlock the bootloader. Your device will wipe completely so backup anything you'd rather not lose forever.
Remember, a 32gb Nexus will take 10 to 15 minutes to wipe and reboot. A 64gb will take 20 minutes or more.
The benefit of doing it this way is you know exactly what is happening to your device, unlike a toolkit. Also, you just learned something! Plus, if you get stuck somewhere and end up soft bricked, you'll understand what and how when someone here tells you how to fix it.
Thank you guys for your responses ! I think my laziness is going to win me out this round so im going to use the toolkit. But next time, I will do the correct way!
Hi, I've just got my MI 5 and it is very, very nice. But I am now starting to look further into it and I am confused by all the different ROMs....
The one I have came with MIUI Global 7.3 | Stable MI7.3.3.0.0(MAACNDD). First confusion is that I can't find any references to a ROM by that number anywhere - it has double 0 at the end MI7.3.3.0.0. Is it a real ROM?
More generally I can't work out which ROM would be best for a user in the UK? Without rooting that is so CM is out for the moment.
Can anyone point me in the right direction, thanks.
It may be fake rom. If you want to use MIUI better flash xiaomi.eu ROM: https://xiaomi.eu/community/threads/6-6-23.32335/ but it will need unlocked bootloader.
Without unlocking bootloader you can flash official global using MiFlash: http://en.miui.com/download-299.html
Thanks! I have applied to unlock the bootloader and will flash the unofficial ROM ASAP. Well, I will do some more reading to see which is most appropriate to me.
palexr said:
Thanks! I have applied to unlock the bootloader and will flash the unofficial ROM ASAP. Well, I will do some more reading to see which is most appropriate to me.
Click to expand...
Click to collapse
Hey how did you get on with this ? did you get the unlock code ?
Im in a similar situation to you
Ry2mkk said:
Hey how did you get on with this ? did you get the unlock code ?
Im in a similar situation to you
Click to expand...
Click to collapse
Not done it yet.
I need to flash the China Dev ROM first apparently. I think I will use this method to flash to a "recovery" (?) ROM from which I can then flash the China Dev ROM and then subsequently flash one of the unofficial eu miui ROMs.
I'll update when I have found the time to do all these things.
Hey, I can tell that you'll have an easier time if you do what I did:
Apply for bootloader unlock. Do the unlock (follow the guide here to be sure) It should work on any ROM, mine was China 7.3.2.0.
Back up any images, videos etc. to your PC.
Download a ROM zip of your choice (xiaomi eu in your case but any compatible ROM on this forum or on miui forum will do)
Get the Xiaomi eu TWRP zip from their page. Extract the recovery img file, and the boot img file.
You could also get SuperSU zip from their page if you want root.
Do you have adb and fastboot? If not, just get "minimal adb and fastboot" from the forum here for Windows, or if you're on Linux your package manager probably has them both listed.
Put your phone into fastboot. (Switch off, press volume down and power button until it boots to a screen saying fastboot.) Then connect to your PC.
Open your command prompt from the "run" dialogue: cmd
Use this command: (double check this by googling)
fastboot flash recovery (path to recovery img)
Since you plan to flash xiaomi eu ( you don't need this for a CM based ROM):
fastboot flash boot (path to boot img)
Now to go into the recovery:
fastboot boot recovery (path to recovery img)
There is probably an easier way to do this but I'm not sure of it yet.
Your phone will boot into TWRP. You might face the unresponsive touchscreen bug (I did) but it goes away after some time (or you could plug unplug it from the PC multiple times, seemed to work for someone else on the forums).
If it asks you for the encryption password (it asked me, and I was on a Chinese ROM so it might ask you) then you'll have to wipe the data partition under the wipe menu (it's named as internal storage). This is why the backup was needed.
Under the wipe menu, you'll need to do a factory reset, but I wiped everything just to be safe. Now, just after wiping when I tried to access the internal storage from twrp (Under advanced > file manager) it didn't show me anything (probably because I wiped the internal storage). So just reboot into twrp (reboot > recovery) and it should show the internal storage now.
Open the internal storage on your PC (still connected, right?) and put the xiaomi eu ROM in the internal storage. Then go to install menu in TWRP and select the ROM and flash it. After it's done, it'll offer to wipe cache and dalvik cache. Do it to be safe.
Flash the SuperSU zip if you want it.
Reboot to system.
Profit.
Disclaimer: I haven't flashed xiaomi eu ROM so I cannot guarantee that the steps are perfect. Normally, I would just point you to xiaomi eu's website, but the reason I wrote in such detail is because they say "Install TWRP zip via updater app or fastboot", which is stupid, because not even OFFICIAL xiaomi ROMs work with the updater app (I tried to install global stable and it said couldn't verify package what even), and fastboot mode doesn't allow flashing zips... so. Also, I've read that xiaomi eu comes with Google apps preinstalled, so that's good. Otherwise you need to download even that zip and flash just after flashing the ROM.
andy356 said:
Hey, I can tell that you'll have an easier time if you do what I did:
Apply for bootloader unlock. Do the unlock (follow the guide here to be sure) It should work on any ROM, mine was China 7.3.2.0.
Back up any images, videos etc. to your PC.
Download a ROM zip of your choice (xiaomi eu in your case but any compatible ROM on this forum or on miui forum will do)
Get the Xiaomi eu TWRP zip from their page. Extract the recovery img file, and the boot img file.
You could also get SuperSU zip from their page if you want root.
Do you have adb and fastboot? If not, just get "minimal adb and fastboot" from the forum here for Windows, or if you're on Linux your package manager probably has them both listed.
Put your phone into fastboot. (Switch off, press volume down and power button until it boots to a screen saying fastboot.) Then connect to your PC.
Open your command prompt from the "run" dialogue: cmd
Use this command: (double check this by googling)
fastboot flash recovery (path to recovery img)
Since you plan to flash xiaomi eu ( you don't need this for a CM based ROM):
fastboot flash boot (path to boot img)
Now to go into the recovery:
fastboot boot recovery (path to recovery img)
There is probably an easier way to do this but I'm not sure of it yet.
Your phone will boot into TWRP. You might face the unresponsive touchscreen bug (I did) but it goes away after some time (or you could plug unplug it from the PC multiple times, seemed to work for someone else on the forums).
If it asks you for the encryption password (it asked me, and I was on a Chinese ROM so it might ask you) then you'll have to wipe the data partition under the wipe menu (it's named as internal storage). This is why the backup was needed.
Under the wipe menu, you'll need to do a factory reset, but I wiped everything just to be safe. Now, just after wiping when I tried to access the internal storage from twrp (Under advanced > file manager) it didn't show me anything (probably because I wiped the internal storage). So just reboot into twrp (reboot > recovery) and it should show the internal storage now.
Open the internal storage on your PC (still connected, right?) and put the xiaomi eu ROM in the internal storage. Then go to install menu in TWRP and select the ROM and flash it. After it's done, it'll offer to wipe cache and dalvik cache. Do it to be safe.
Flash the SuperSU zip if you want it.
Reboot to system.
Profit.
Disclaimer: I haven't flashed xiaomi eu ROM so I cannot guarantee that the steps are perfect. Normally, I would just point you to xiaomi eu's website, but the reason I wrote in such detail is because they say "Install TWRP zip via updater app or fastboot", which is stupid, because not even OFFICIAL xiaomi ROMs work with the updater app (I tried to install global stable and it said couldn't verify package what even), and fastboot mode doesn't allow flashing zips... so. Also, I've read that xiaomi eu comes with Google apps preinstalled, so that's good. Otherwise you need to download even that zip and flash just after flashing the ROM.
Click to expand...
Click to collapse
Thanks Andy, that is a really useful reply and I will definitely use to flash my next ROM.
In the meantime I managed to update to the latest official global ROM using the updater! I tried initially to Chinese Dev one put I got the same "can't verify package" error message. I had downloaded it on my PC and transferred it manually to the phone. I then downloaded the global version directly to the phone and that worked.
So now I need to figure out if i need to be on the Chinese dev rom to unlock or if the official global rom will do?
Unlocking can be done on any ROM. I unlocked on Chinese stable. It's good that you could flash the global ROM, at least the sense of urgency to get Google play services is gone now.
I had Resurrection rom installed in my K3 note and needed to sell the phone. So performed a complete wipe of the internal storage and tried to install AICP rom later (TWRP), it shows flashed successfully, but whenever I am booting my phone, it always boots to recovery only. Downloaded the SP flash tool to go back to stock rom with stock firmware, but as soon as I plug my phone woth my laptop with the USB cable, (which is switched off at this moment) after clicking the download option in the SP Flash tool, it just again boots back to recovery and the stock firmware's download never happens because my phone has booted into recovery. So i guess no use of SP Flash tool too.
I am able to connect my phone to my laptop and can see my internal storage and i can transfer files too.
Any help,?
Current rom flashed via TWRP - AICP v4.2 and Gapps micro (arm 64, pico) (Still stuck in booloop to TWRP only )
I am having the same issue! I've selected to restore factory settings and bam, it boots only to TWRP, I've tried to flash it with new rr rom (09.2017) but it is without any improvement still TWRP.
I think I'll try to do things like I did when changing it from stock model.
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE
what button combination to boot into fastboot
Hi
Whats the key communication to boot into fastboot to flash recovery image ?
Currently, having only stock recovery with no os installation.
Did you get the solution?
I gave reboot phone and the phone is stuck into an infinite restart.
Arjunism said:
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE
Click to expand...
Click to collapse
There are only one reason for your device to brick is Wrong File Flash. The Most important think is you remember what you flash last time ,Your Device ROM or Recovery.
these are type of your Deice is brick
1. You are on Stock ROM realme UI 1.0 and Flash TWRP go to click here
2. You are on Stock ROM realme UI 1.0 and TWRP and Flash Custom ROM go to Click here
3. You are On Custom ROM and GO back To stock ROM Realme UI 1.0 , click here this theread is most useful read all think.
4. You are on Realme UI 2.0, and Flash TWRP than Brick....
no post available for root or twrp in ui 2.0 so many users flash last twrp for rooting phone than device are brick or phone boot in fastboot mode only.
Download the stock recovery for Realme UI 2.0 CLICK HERE like recovery_x2_a11.img.
Start (reboot) phone into fastboot mode
Give Command from Your computer(any device to use for fastboot) fastboot flash recovery recovery_x2_a11.img.
Next fastboot reboot recovery now your device boot in recovery UI 2.0.
from the stock recovery u wipe your all data (its required for your device boot in stock rom) than reboot your device may be taken time around 5-6 min on realme logo .
if your device don't boot after 10 min. dont very we have solution force restart Volume+ or Power key (press both) more than 10 sec. and go to Stock recovery.
Download the roll back package and put on SD card or OTG .
Link: Rollback package realme_X2_RMX1992EX / realme_X2_RMX1992AEX
Enter recovery mode to roll back:
Turn off your phone-->Long press the volume down and power buttons at the same time enter recovery mode-->Choose the language -->Install from storage
If you want to custom recovery or ROM Like as TWRP so you downgrade your ROM ui 2.0 to realme ui 1.0 follow Step 6 than 1 or 2
if any other query comment please or sorry for bad English
You are on Realme UI 2.0, and Flash TWRP than Brick....
no post available for root or twrp in ui 2.0 so many users flash last twrp for rooting phone than device are brick or phone boot in fastboot mode only.
Any update on this?
I have started flashing twrp and stuck at fastboot mode only.
Couldn't enter recovery mode
hercules1997 said:
You are on Realme UI 2.0, and Flash TWRP than Brick....
no post available for root or twrp in ui 2.0 so many users flash last twrp for rooting phone than device are brick or phone boot in fastboot mode only.
Any update on this?
I have started flashing twrp and stuck at fastboot mode only.
Couldn't enter recovery mode
Click to expand...
Click to collapse
Follow step 4 if you stuck on fastboot mode only
I have realme X2 (RMX1992 Indian version) currently stuck with no ROM. Only with bootloader screen
How did i end up here:
I have applied all the updates available for Realme X2, then it was in relame UI 2.0.
I have tried to flash ofp of realme 1.0 from official flash tool "realme_Flash_Tool_V2".
Flashing completed without error, But phone rebooted to bootloader
Since then, whatever i have flashed, it done not move further from bootloader
None of the other customer recoveries woking ( Tried TWRP, Orange fox)
I have followed the steps in previous post of this thread and i was able to flash "recovery_x2_a11.img".
But in the recovery, From phone storage shows nothing. I have put realme_X2_RMX1992EX package in SD card and tried to check the same from recovery. But from SD card it shows nothing even though i have put files there. Even From USB OTG, same behaviour
Could someone help how can i get it to some ROM to make the phone alive!! May be with fastboot flashable images for RUI2.0.
Arjun89 said:
I have realme X2 (RMX1992 Indian version) currently stuck with no ROM. Only with bootloader screen
How did i end up here:
I have applied all the updates available for Realme X2, then it was in relame UI 2.0.
I have tried to flash ofp of realme 1.0 from official flash tool "realme_Flash_Tool_V2".
Flashing completed without error, But phone rebooted to bootloader
Since then, whatever i have flashed, it done not move further from bootloader
None of the other customer recoveries woking ( Tried TWRP, Orange fox)
I have followed the steps in previous post of this thread and i was able to flash "recovery_x2_a11.img".
But in the recovery, From phone storage shows nothing. I have put realme_X2_RMX1992EX package in SD card and tried to check the same from recovery. But from SD card it shows nothing even though i have put files there. Even From USB OTG, same behaviour
Could someone help how can i get it to some ROM to make the phone alive!! May be with fastboot flashable images for RUI2.0.
Click to expand...
Click to collapse
hey bro, same as you, Have you solved it?
sauravprofile said:
There are only one reason for your device to brick is Wrong File Flash. The Most important think is you remember what you flash last time ,Your Device ROM or Recovery.
these are type of your Deice is brick
1. You are on Stock ROM realme UI 1.0 and Flash TWRP go to click here
2. You are on Stock ROM realme UI 1.0 and TWRP and Flash Custom ROM go to Click here
3. You are On Custom ROM and GO back To stock ROM Realme UI 1.0 , click here this theread is most useful read all think.
4. You are on Realme UI 2.0, and Flash TWRP than Brick....
no post available for root or twrp in ui 2.0 so many users flash last twrp for rooting phone than device are brick or phone boot in fastboot mode only.
Download the stock recovery for Realme UI 2.0 CLICK HERE like recovery_x2_a11.img.
Start (reboot) phone into fastboot mode
Give Command from Your computer(any device to use for fastboot) fastboot flash recovery recovery_x2_a11.img.
Next fastboot reboot recovery now your device boot in recovery UI 2.0.
from the stock recovery u wipe your all data (its required for your device boot in stock rom) than reboot your device may be taken time around 5-6 min on realme logo .
if your device don't boot after 10 min. dont very we have solution force restart Volume+ or Power key (press both) more than 10 sec. and go to Stock recovery.
Download the roll back package and put on SD card or OTG .
Link: Rollback package realme_X2_RMX1992EX / realme_X2_RMX1992AEX
Enter recovery mode to roll back:
Turn off your phone-->Long press the volume down and power buttons at the same time enter recovery mode-->Choose the language -->Install from storage
If you want to custom recovery or ROM Like as TWRP so you downgrade your ROM ui 2.0 to realme ui 1.0 follow Step 6 than 1 or 2
if any other query comment please or sorry for bad English
Click to expand...
Click to collapse
hi, in the step6, there is nothing in SD card or OTG, and when i click from phone storage, it happens nothing, Could someone help how can i get it to some ROM to make the phone alive!! May be with fastboot flashable images for RUI2.0.
bidoru said:
hi, in the step6, there is nothing in SD card or OTG, and when i click from phone storage, it happens nothing, Could someone help how can i get it to some ROM to make the phone alive!! May be with fastboot flashable images for RUI2.0.
Click to expand...
Click to collapse
6 step have a download link download file transfer in sd card
sauravprofile said:
6 step have a download link download file transfer in sd card
Click to expand...
Click to collapse
sd card can not be detected, so I put files in sd card and insert sd card in otg,but found nothing from recovery
Hey there, first post here,
Got several higs with my RN10S playing a bit.
How to flash a custom rom in Xiaomi phones?
-First unlock your BL with MiFlashUnlocker.
MiFlashUnlocker
-assuming you're on 12.5.16.eu and wants to go to custom rom;
-first of all you need to be on 12.5.16global, only global version works atm.
So MiFU was useless atm. Or No:
Open MiFlashTool 2018.5.28.0 and Select the folder where you previously extracted 12.5.16global tzg .
Connect your phone in fastboot mode, rescan beward to the corner right.
You could clean all and flash 12.5.16 and MiFU would have been usefull
You could save your "user data"
Or you could clean all and lock flash and lock- BL, for just security purpose telling yourself you would Re-unlock in the future and thus you would need to Unlock it again, so MiFU again..
For tho who still follow, you just fastboot flashed 12.5.16global,
Boot it, i assume that this part is important, cause flashing TWRP just after a fastboot rom flash could end up in unmounted partitions,
Flash TWRP with phone in fastboot mode:
fastboot flash boot recovery.img
To temporarely replace the boot by recovery,
fastboot reboot recovery to boot onto it
Once in there, Switch to slot B;
(Reboot button- there you have option to use either slots)
Flash your rom and reflash TWRP by using the tick next to the digest, while flashing the rom.
Reboot Recovery to get things settled,
Format data to just keep the freshly installed rom, (Wipe, Data, yes) and get it working and running
Reboot and enjoy!
To revert simply fire up MiFlashTool and an original 12.5.16 tgz file, for security purpose,
You may wants to format, flash, lock.
The same technique could be applyied if running Miui 13 and wants to revert to 12.5
There is ARB but doesn't seem to be taken onto consideration bout the program
I got a red !Phone is destroyed, press power to power off! And my phone is still working actually.
I take absolutely no credits for that,
Just figured out the messy workaround and gathered informations,
These roms are not from me, and i Can confirm their bootability,
Beside that, lightweight, but no fast charge.
Got back to stock, cause of banking app, fast charge
Go feel free to post your techniques to get yourself out if situation
twrp is not on redmi note 10 s yet is it ?