I have wiped data from the twrp recovery and now the phone does not work with me and what I think I deleted the rom completely and now about the operation of the phone goes to Bot Lauder does not work Is there a solution or you can download ROMs via cmd
didzayed said:
I have wiped data from the twrp recovery and now the phone does not work with me and what I think I deleted the rom completely and now about the operation of the phone goes to Bot Lauder does not work Is there a solution or you can download ROMs via cmd
Click to expand...
Click to collapse
are you sure the twrp recovery is gone,
try to boot into twrp recovery by holding pwer and volume up
if it's gone there's two options use adb or the restore tool posted
hagouba said:
are you sure the twrp recovery is gone,
try to boot into twrp recovery by holding pwer and volume up
if it's gone there's two options use adb or the restore tool posted
Click to expand...
Click to collapse
I want to restore using ADB but I have no command to check
didzayed said:
I have wiped data from the twrp recovery and now the phone does not work with me and what I think I deleted the rom completely and now about the operation of the phone goes to Bot Lauder does not work Is there a solution or you can download ROMs via cmd
Click to expand...
Click to collapse
Flash file boot.img of ROM you use in cmd. Vd: use rom chinav2.35.zip -> unzip file rom and copy file boot.img to folder of adb -> open cmd on folder adb and type cmd:
fastboot devices
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
- Reboot
Related
So i was trying to use Rom manager with my rogers htc dream with the new universal root stuff and while using the rom manager the part where it said it will boot into recovery mode to flash it just stayed at the Rogers screen any ideas ?
Can you get into the recovery by holding home while you power on? Or Fastboot by holding camera?
cyberclone33 said:
So i was trying to use Rom manager with my rogers htc dream with the new universal root stuff and while using the rom manager the part where it said it will boot into recovery mode to flash it just stayed at the Rogers screen any ideas ?
Click to expand...
Click to collapse
Just boot up the rom normally then go to rom manager
Settings > check erase recovery when flashing a new one.
Then flash it again.
If that doesn't work ADB will do the trick:
Go into fastboot USB
from your computer type:
Code:
fastboot erase recovery
Load up the rom normally again and then try reflashing the clockwork recovery again.
If all else fails
download amon-ra recovery
Fastboot usb
Code:
fastboot erase recovery
fastboot flash recovery (location in with the recovery is stored desktop downloads etc)
If you're using windows you can just drag the recovery over into command promt and it should automatically list the file for you.
so after following the instrucions down below, I can't access TWRP recovery. Everytime I go to the recovery from bootloader, it will restart the phone automatically. I made a backup before doing this, but now i can't even get into recovery mode from boot loader
Installing recovery using fastboot
You can use fastboot to install your recovery image to the device.
Installing ClockworkMod Recovery on the One (Sprint)
Download koush's ClockworkMod Recovery.
koush's ClockworkMod Recovery: download
md5: 8e1001f45ad07d4cda03b813739f85c1
Connect the One (Sprint) to the computer via USB.
Make sure the fastboot binary is in your PATH or that you place the downloaded image in the same directory as fastboot.
Open a terminal on your PC and reboot the device into fastboot mode by typing adb reboot bootloader or by using the hardware key combination.
Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
Flash ClockworkMod Recovery onto your device by entering the following command: fastboot flash recovery your_recovery_image.img where the latter part is the name of the file you downloaded.
Once the flash completes successfully, reboot the device into recovery to verify the installation.
Note: Some ROMs overwrite recovery at boot time so if you do not plan to immediately boot into recovery to install CyanogenMod, please be aware that this may overwrite your custom recovery with the stock one.
stevenpyang said:
so after following the instrucions down below, I can't access TWRP recovery. Everytime I go to the recovery from bootloader, it will restart the phone automatically. I made a backup before doing this, but now i can't even get into recovery mode from boot loader
Installing recovery using fastboot
You can use fastboot to install your recovery image to the device.
Installing ClockworkMod Recovery on the One (Sprint)
Download koush's ClockworkMod Recovery.
koush's ClockworkMod Recovery: download
md5: 8e1001f45ad07d4cda03b813739f85c1
Connect the One (Sprint) to the computer via USB.
Make sure the fastboot binary is in your PATH or that you place the downloaded image in the same directory as fastboot.
Open a terminal on your PC and reboot the device into fastboot mode by typing adb reboot bootloader or by using the hardware key combination.
Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
Flash ClockworkMod Recovery onto your device by entering the following command: fastboot flash recovery your_recovery_image.img where the latter part is the name of the file you downloaded.
Once the flash completes successfully, reboot the device into recovery to verify the installation.
Note: Some ROMs overwrite recovery at boot time so if you do not plan to immediately
boot into recovery to install CyanogenMod, please be aware that this may overwrite your custom recovery with the stock one.
Click to expand...
Click to collapse
get Into fastboot ; from cmd type, fastboot erase cache
and then try getting into recovery
nope
prunzzz said:
get Into fastboot ; from cmd type, fastboot erase cache
and then try getting into recovery
Click to expand...
Click to collapse
I did that and the same problem. instead of the phone restarting it just shuts down now.
stevenpyang said:
I did that and the same problem. instead of the phone restarting it just shuts down now.
Click to expand...
Click to collapse
put here the link of guide you followed
also the link of download of recovery
Hi,
I'm in desperate need of some help and am not sure what to do. My HTC One m7 got stuck in Cyanogenmod Simple Recovery after the latest update. It will keep rebooting back into Simple Recovery. Is there any way to get my phone back either to stock or to Cyanogenmod?
I always just left it on Cyanogenmod so I'm not very familiar with flashing or other programs. If anyone has any advice, could you please point me to the correct tutorials and downloads?
I am at a complete loss with how to get my phone to its original state.
Perez92 said:
Hi,
I'm in desperate need of some help and am not sure what to do. My HTC One m7 got stuck in Cyanogenmod Simple Recovery after the latest update. It will keep rebooting back into Simple Recovery. Is there any way to get my phone back either to stock or to Cyanogenmod?
I always just left it on Cyanogenmod so I'm not very familiar with flashing or other programs. If anyone has any advice, could you please point me to the correct tutorials and downloads?
I am at a complete loss with how to get my phone to its original state.
Click to expand...
Click to collapse
Follow this nkk71's Return to 100% Stock Guide!
majmoz said:
Follow this nkk71's Return to 100% Stock Guide!
Click to expand...
Click to collapse
Thank you for the response, however my biggest issue is getting out of simple recovery. How do I install a new recovery, such as TWRP or CWM at the simple recovery screen and how do I flash the latest cyanogenmod rom?
Perez92 said:
Thank you for the response, however my biggest issue is getting out of simple recovery. How do I install a new recovery, such as TWRP or CWM at the simple recovery screen and how do I flash the latest cyanogenmod rom?
Click to expand...
Click to collapse
You will have to flash CWM recovery in bootloader/FASTBOOT USB. You can get the recovery from http://www.clockworkmod.com/rommanager find your phone then download the recovery.
In bootloader/FASTBOOT USB, flash CWM recovery (either rename the file CWM.img or type the whole name in place of CWM):
fastboot flash recovery CWM.img
fastboot erase cache
fastboot reboot-bootloader
majmoz said:
You will have to flash CWM recovery in bootloader/FASTBOOT USB. You can get the recovery from http://www.clockworkmod.com/rommanager find your phone then download the recovery.
In bootloader/FASTBOOT USB, flash CWM recovery (either rename the file CWM.img or type the whole name in place of CWM):
fastboot flash recovery CWM.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Thank you for replying.
So from what I'm understanding is that I will need to use ADB to sideload the recovery onto my phone, correct?
I'm not sure what the bootloader/FASTBOOT USB you refer to, I feel like I need it to be ELI5. My brain is melting when trying to read this.
P.S. I am STUCK in Cyanogenmod Simple Recovery. I am not able to power down the device or get to any other screen.
Perez92 said:
Thank you for replying.
So from what I'm understanding is that I will need to use ADB to sideload the recovery onto my phone, correct?
I'm not sure what the bootloader/FASTBOOT USB you refer to, I feel like I need it to be ELI5. My brain is melting when trying to read this.
Click to expand...
Click to collapse
No, you can not load the recovery with sideload. Have ADB & Fastboot installed on your computer, place the recovery file in the same folder and connect your phone to the computer.
Open a command window in the folder where ADB & fastboot reside.
Type: adb reboot bootloader
When the screen on your phone shows the white bootloader screen in blue will be FASTBOOT USB
Type one line at a time waiting until the cmd screen states OK or something similiar:
fastboot flash recovery CWM.img
fastboot erase cache
fastboot reboot-bootloader
Here is a guide on fastboot commands.
majmoz said:
No, you can not load the recovery with sideload. Have ADB & Fastboot installed on your computer, place the recovery file in the same folder and connect your phone to the computer.
Open a command window in the folder where ADB & fastboot reside.
Type: adb reboot bootloader
When the screen on your phone shows the white bootloader screen in blue will be FASTBOOT USB
Type one line at a time waiting until the cmd screen states OK or something similiar:
fastboot flash recovery CWM.img
fastboot erase cache
fastboot reboot-bootloader
Here is a guide on fastboot commands.
Click to expand...
Click to collapse
So I was able to get my device past the first prompt. I now see the white bootloader screen and it does say "FASTBOOT USB". I downloaded the latest TWRP and placed it in the same folder as ADB and Fastboot. I did the second command to flash it, however I keep getting the error "error: cannot open 'TWRP.img'. Any idea as to what I could be doing wrong?
majmoz said:
No, you can not load the recovery with sideload. Have ADB & Fastboot installed on your computer, place the recovery file in the same folder and connect your phone to the computer.
Open a command window in the folder where ADB & fastboot reside.
Type: adb reboot bootloader
When the screen on your phone shows the white bootloader screen in blue will be FASTBOOT USB
Type one line at a time waiting until the cmd screen states OK or something similiar:
fastboot flash recovery CWM.img
fastboot erase cache
fastboot reboot-bootloader
Here is a guide on fastboot commands.
Click to expand...
Click to collapse
Got it to work. Used adb to get into fastboot. Then opened up the CM installer and let it redownload cyanogenmod onto my phone.
Thanks for the help!
While I flashed 1.2GB.zip to expand my partition size, I got some issue to reset my phone. now, my recovery is xiaomi stock recovery and when i go into fastboot mode, my pc can't detect my phone by adb function. I test variety of version and pc, still not work. Can someone help me to write a stock partition that can fastboot with MITool? Many thanks, my phone only can detect with MiTool in this moment. Sorry for interruption.
First flash cwm or twrp recovery with fastboot .flash stok repartition zip in cwm then flash with miflash.
Sometimes adb not work due to bad driver reinstall drivers for adb.
cfw950116 said:
While I flashed 1.2GB.zip to expand my partition size, I got some issue to reset my phone. now, my recovery is xiaomi stock recovery and when i go into fastboot mode, my pc can't detect my phone by adb function. I test variety of version and pc, still not work. Can someone help me to write a stock partition that can fastboot with MITool? Many thanks, my phone only can detect with MiTool in this moment. Sorry for interruption.
Click to expand...
Click to collapse
I was in the same situation. Mi recovery without adb and
and fastboot only. I'm on the phone and can't post links but if you go to the repartitioning thread and find my posts(there are not many)read it through and you will find a link to "how to fastboot" thread. If your computer recognizes your phone in fastboot mode than you'll be fine. Download from the same thread repartitioning to stock from the HTC mania guy if you want to flash miui with miflash. Otherwise it won't work. Good luck.
ashish289 said:
First flash cwm or twrp recovery with fastboot .flash stok repartition zip in cwm then flash with miflash.
Sometimes adb not work due to bad driver reinstall drivers for adb.
Click to expand...
Click to collapse
If you can flash CWM ,then you are good to go.My phone is not detected via adb devices command but I dont know how fastboot commands work all the time.
gauravsaini964 said:
If you can flash CWM ,then you are good to go.My phone is not detected via adb devices command but I dont know how fastboot commands work all the time.
Click to expand...
Click to collapse
i think adb will not work in this case because mi recovery dont support adb so boot into fastboot mode by pressing volume down + power key there will be mi bunny and fastboot mode .
u will need recovery in img format so extract recovery.img file from cwm r11 zip file and put it in adb or fastboot folder . then
open command prompt in adb folder and type.
fastboot devices
if it show device id then type
fastboot flash recovery recovery.img
fastboot reboot
try to boot it into recovery mode by using key combination ( vol up+ power buttuon) and it should boot in clockwork mode recovery.
and flash reparition zip to return to stok partition
repartition stok zip by eaxir http://forum.xda-developers.com/xia...ize-extend-partition-capacity-t3011918/page17
if u dont have repartition zip then use adb side load method to send file to device and flash it or ask me again.
now you can use miflash.
ashish289 said:
i think adb will not work in this case because mi recovery dont support adb so boot into fastboot mode by pressing volume down + power key there will be mi bunny and fastboot mode .
u will need recovery in img format so extract recovery.img file from cwm r11 zip file and put it in adb or fastboot folder . then
open command prompt in adb folder and type.
fastboot devices
if it show device id then type
fastboot flash recovery recovery.img
fastboot reboot
try to boot it into recovery mode by using key combination ( vol up+ power buttuon) and it should boot in clockwork mode recovery.
and flash reparition zip to return to stok partition
repartition stok zip by eaxir http://forum.xda-developers.com/xia...ize-extend-partition-capacity-t3011918/page17
if u dont have repartition zip then use adb side load method to send file to device and flash it or ask me again.
now you can use miflash.
Click to expand...
Click to collapse
can i flash repartition stock zip by eaxir via twrp ? please answer
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Try another recovery and if it failed try full flash latest stable rom
Well, I have been warning so many times that use any TWRP in MI9:
1. format data partition
2. reboot TWRP and then enter twrp. Make twrp mount data partition
3. wipe everything BUT please keep system partition only
4. reboot twrp and then enter twrp again
5. Now wipe system partition and then flash any rom you want
6. reboot
How to save your phone now ? Please try fastboot ROM and use miflash app to save your phone !
Kris
ManuBBXX said:
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Click to expand...
Click to collapse
@Kris Chen I am in similar situation here... Can you please help?
First of all - which TWRP should we use for Mi9T? IS this one good? https://mifirm.net/model/davinci.ttt#other-twrp
After flashing recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150.img - fastboot boot twrp.img goes okay
And then after "fastboot boot twrp.img" the phone restarts and is just stuck on the "semitransparent" MI logo...
I can press Vol+- and power buttons and boot into Mi 3 recovery, wipe data, set up the phone again. And then it is all over again. I am new to this and probably making some basic mistake?
EDIT. I think the mistake was to trying to use a wrong TWRP...
Some questions here:
1. Is Redmi K20 CN the same as Mi9T?
If yes, that twrp is correct and the best one
2.After flashing twrp, can you enter twrp by general
method : power + volume up to enter twrp?
If yes, I think the problem is coming from your data
partition. Please format your data partition first and
then reboot to Twrp again. Then copy your rom in your
phone and then wipe cache/ dalvik cache/system. Next
to flash rom. Always Remeber not to reboot your
phone if you haven't flashed rom under twrp after
flashing system partition.
Kris
Ardysan said:
@Kris Chen I am in similar situation here... Can you please help?
First of all - which TWRP should we use for Mi9T? IS this one good? https://mifirm.net/model/davinci.ttt#other-twrp
After flashing recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150.img - fastboot boot twrp.img goes okay
And then after "fastboot boot twrp.img" the phone restarts and is just stuck on the "semitransparent" MI logo...
I can press Vol+- and power buttons and boot into Mi 3 recovery, wipe data, set up the phone again. And then it is all over again. I am new to this and probably making some basic mistake?
EDIT. I think the mistake was to trying to use a wrong TWRP...
Click to expand...
Click to collapse
Thank you Kris!
Download the fastboot rom (Google it )then flash it with miflashtool just make sure the archive of the ROM is "tgz"before you unzip it .
Failykun said:
Download the fastboot rom (Google it )then flash it with miflashtool just make sure the archive of the ROM is "tgz"before you unzip it .
Click to expand...
Click to collapse
This is what I had to do both times this happened.
I have the same exact problem
I used the same TWRP and I also wiped system.
Did you fixed it already?
RebornCheiko said:
I have the same exact problem
I used the same TWRP and I also wiped system.
Did you fixed it already?
Click to expand...
Click to collapse
As i understand, you wiped system and then restarted? And now you can enter only fastboot?
When you wipe system you must flash a ROM without restart or after restart, only fastboot available. TWRP version has nothing to do with this.
Now you must use mi flash or adb and fastboot utility. Download fastboot version of ROM, then open archive and flash it using mi flash or flash_all.bat script. flash_all_lock.bat will also lock your bootloader and mi flash has that option too, so check twice what option you choose
After flashing ROM you can flash TWRP again and it will be available, because by flashing ROM you restored system
I had the same problem.
Try to flash vbmeta.img via fastboot (fastboot --disable-verity flash vbmeta vbmeta.img) and then flash recovery then boot recovery.
Or try to flash boot.img (fastboot flash boot boot.img) then flash recovery.
ManuBBXX said:
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Click to expand...
Click to collapse
I got you chief. Make sure you have adb and fastboot installed.
No you don't need Mi flash tool for this. All you need is a computer.
Go to fastboot mode, plug in your device and expand cepheus.tgz file you downloaded. Link below
https://xiaomifirmwareupdater.com/
Now open the folder. You have the flash_all files in there. Any .bat file is for Windows only. Any .sh files are for Mac and Linux.
Make sure the device is recognized in fastboot via cmd or terminal
WINDOWS ONLY: Open Command prompt and drag flash_all.bat into the cmd window and press enter
MAC/LINUX: Open terminal and drag flash_all.sh into the terminal window and press enter.
This part requires some patience. Wait until everything is finished.
Reboot using power button and it should be back to normal.