Team, help needed please..got this device from swappa and realized the device has an engineering mode activated. It doesnt allow me relock the bootloader and without locked bootloader, I wont be able to access few key apps I need.
adb oem lock commands return with a success message but the bootloader is never locked..here's the text from the fastboot screengrab..any help will be very much appreciated.
AP Fastboot Flash Mode (Not Secure)
BL: M-3.8-uefi-3r845b 6180521
Baseband: M 63618220164 R BECKHAMLMA CUST
Product Variant: beckhama XT1929-4 64GB PUT
Serial Number: NS9A420728
CPU: SDN 636 1.8 (2)
MC: 64GB SAMSUNG DH6DMB RU-88 PU-05 FU-8900880888888885
DRAN: 46B SAMSUNG LP4X DIE-166b M5-01 M6-06 M7-18 MB-12
Console NULL: null
Tools Mode Config: ENABLED
Power OK
engineerIng
Connect USB Data Cable
Best bet is to probably boot it to bootloader, scroll through the options until it says TOOLS and then press the power button once to disable TOOLS mode, this should get it out of engineering mode. Then scroll with volume to "boot" and see what happens.
Related
V40 on startup: "Your device has failed a routine safety check and will not boot."
I was following this guide to try to flash a US firmware on my bootloader-unlocked Sprint V40: https://forum.xda-developers.com/lg-v40/how-to/guide-make-lg-v40-compatible-lgup-t3953120
After issuing the command "fastboot.exe set_active a" then powering off and trying to enter download mode, I get "Your device has failed a routine safety check and will not boot."
It briefly goes into download mode after that (for just a few seconds). Then I get a green screen with black text that says "LGE Crash Handler : FIQ : NOC Error!" and has a whole lot of other diagnostic info.
my one says all slots are unbootable
imekul said:
I was following this guide to try to flash a US firmware on my bootloader-unlocked Sprint V40: https://forum.xda-developers.com/lg-v40/how-to/guide-make-lg-v40-compatible-lgup-t3953120
After issuing the command "fastboot.exe set_active a" then powering off and trying to enter download mode, I get "Your device has failed a routine safety check and will not boot."
It briefly goes into download mode after that (for just a few seconds). Then I get a green screen with black text that says "LGE Crash Handler : FIQ : NOC Error!" and has a whole lot of other diagnostic info.
Click to expand...
Click to collapse
You have to restore your software again and re-root
Hold Volume+ and plug the phone to your PC to get it into download mode. Use LGUP to reflash the firmware.
Hi, I have a similar problem. after I give the command "fastboot oem unlock" to unlock, I tried to start in download mode and the same message appeared, if I restart the phone or let it restart by itself, it goes into fastboot mode, can anyone help me?
my phone is a lg g7 thinq
zMarkTM said:
Hi, I have a similar problem. after I give the command "fastboot oem unlock" to unlock, I tried to start in download mode and the same message appeared, if I restart the phone or let it restart by itself, it goes into fastboot mode, can anyone help me?
my phone is a lg g7 thinq
Click to expand...
Click to collapse
I too have this problem, i can get it into fastboot mode, and the other mode with the blank screen maybe its 9008 mode (EDL Mode) i do have an EDL cable would that help with anything?
When i press Vol + and insert cable from phone being off it doesnt go into downlaod mode only back to boot loader mode, not into download mode
Its funny its a LG G7, but its showing LM-V350EMW
update, i just manage to OEM unlock the device.
Will keep persisting
still cant get into download mode, it flashes up once i turn off phone, press vol+ and insert cable i see the image of download mode then straight into fastboot it goes
Hi, Im kinda new to this bootloader thingy. What happen is, i updated the razer phone 2 to Pie, but notice wifi and sim card cant be detect. Even factory reset fails. So i thought of flashing new image on it. KINDA easy on my oneplus, but im not sure where I gone wrong on this razer phone 2, i accidentally unlock the bootloader. NOW the problem is HOW to relock it back? i been follow all youtube and guides all over the place but still fails.
The state of device atm, cannot be boot into Download Mode. Everytime I plug in usb c from Windows, it will boot into unlock bootloader warning page, and continue boot into the homescreen. testing the adbtools, fastboot also to no avail. Can anyone help and guide me how to relocking it back? Maybe i type wrongly on cmd or maybe other android steps not similar to razer one etc....:crying:help much appreciated.
Hold volume down while turning on. Then fastboot flashing lock.
the stock usb doesnt send things correctly in BL mode, https://www.amazon.com/Blackweb-3-Foot-Charge-Cable-Connector/dp/B07SG7P3KZ/ worked for me. with the correct usb cable you should be able to perform the lock commands correctly. can you give us more detail of what you tried on this phone so we know if we need to provide you additional information?
https://developer.razer.com/razer-phone-dev-tools/general-instructions/
"Locking the Bootloader
Locking the bootloader is recommended for security reasons. Some applications will not work with an unlocked bootloader.
Start the Phone in Download Mode with one of the following methods:
Using the adb tool: With the Phone powered on, execute: adb reboot bootloader Enter Download Mode:
Plug in a USB cable to connect your Razer Phone to your computer, Power Off the Phone, then turn it on and immediately press and hold the Volume Down button until “Download Mode” appears on screen.
Lock the critical partitions of the Bootloader first by running this command: fastboot flashing lock_critical
Your Razer Phone will show you a confirmation screen. Use the Volume Up/Volume Down buttons for navigation, and press the Power button to select. Your Phone will reboot."
I can't seem to enter download mode. All I have is fastboot mode and the option to either reboot, close the phone or enter recovery mode. I would really like to lock the bootloader, but I can't seem to be able to detect my phone on my PC even though I installed the fastboot driver.
The_Vinlander said:
I can't seem to enter download mode. All I have is fastboot mode and the option to either reboot, close the phone or enter recovery mode. I would really like to lock the bootloader, but I can't seem to be able to detect my phone on my PC even though I installed the fastboot driver.
Click to expand...
Click to collapse
You must use a USB 2.0 port. The RP2 isn't detected by fastboot when connected to a 3/3.1 port.
Reznor7 said:
You must use a USB 2.0 port. The RP2 isn't detected by fastboot when connected to a 3/3.1 port.
Click to expand...
Click to collapse
I tried this, but to no avail. I tried with 2 cables I had and it keeps telling me < waiting for device > when I enter this command; fastboot flashing lock_critical
The_Vinlander said:
I tried this, but to no avail. I tried with 2 cables I had and it keeps telling me < waiting for device > when I enter this command; fastboot flashing lock_critical
Click to expand...
Click to collapse
You need to go into your device manager and select [ android bootloader interface ] while in fastboot
I really need to enter fastboot mode on my zuk, but your screen is burned out so I can't enter developer options to activate usb debugging and perform the "adb reboot bootloader", I would like to know if it is possible to enter fastboot mode through of combinations of physical buttons. My zuk has a blocked bootloader!
As far es I know you need a unlocked bootloader and usb debugging has to be activated.
Why do you need to get into fastboot? If ur screen is no more...
Hi guys, so I recently discovered you can use test point mode on my phone through DC Phoenix to then use HCU to unlock your bootloader and root and flash custom roms etc.
So after unlocking the bootloader which gave a success message. My phone proceeded to reboot into erecovery as there was some red text etc warning me about the system not being verified or trusted or something.
Now i started to download latest software to install through recovery but decided to stop it as i had already downloaded a firmware file 8.1 in full to flash. So i started that. And after flashing the erecovery files it rebooted me into upgrade mode (as it should) but it failed then after a few seconds and then the phone went black screen. I've now only got access to fastboot mode and nothing else. PC picks up the device in FB mode but cant issue any commands. They fail saying remote: failed. So I cannot flash any more files albeit system.img etc.
I have heard of the dload method but i cant seem to get it to work phone just doesnt boot up and start installing or anything.
Worth mentioning I have logs of everything i can post here.
The log from the "Successful" bootloader unlock via HCU: (it relocked after reboot) FRP too I think.
I have also replaced the endings of the imei listings etc with XXXX just as habit. I dont wanan post my IMEI etc online. Call it paranoia lol
25/01/2021 22:49:23
HCU Client v1.0.0.0372
Account: shortyzsly
Before operation turn phone to TestPoint mode:
Turn off phone, then short TestPoint on phone pcb
and plug USB cable
Wait for device "HUAWEI USB COM 1.0" in Ports
Read phone info
2021-01-25 22:49:23.140 Selected Cpu/Bootloader - Kirin970_T1_A8.1_V6
2021-01-25 22:49:23.142 Connecting to server...
2021-01-25 22:49:23.358 Connected!
2021-01-25 22:49:23.939 Find device COM3, handle 9956
BOOTLOADER selected to update:Kirin970_T1_A8.1_V6
2021-01-25 22:49:24.247 Downloading bootloader...
FILE TO download: Kirin970_T1_A8.1_V6_3.dtwork
downloading file Kirin970_T1_A8.1_V6_3.dtwork...
2021-01-25 22:49:26.501 Success
FILE TO download: Kirin970_T1_A8.1_V6_4.dtwork
downloading file Kirin970_T1_A8.1_V6_4.dtwork...
2021-01-25 22:49:27.671 Success
FILE TO download: Kirin970_T1_A8.1_V6_5.dtwork
downloading file Kirin970_T1_A8.1_V6_5.dtwork...
2021-01-25 22:50:22.279 Success
2021-01-25 22:50:22.286 Bootloader write success!
2021-01-25 22:50:22.288 Waiting for device REMOVAL/INSERTION...
2021-01-25 22:50:28.903 Device ready!
2021-01-25 22:50:28.983 Found device in fastboot mode!
2021-01-25 22:50:28.987 Reading info...
2021-01-25 22:50:33.024 Done!
Fastboot provided info:
CPU: kirin970
Model: CLT-L09
Firmware: CLT-L09 9.1.0.372(C782E12R1P11)
Vendor: hw
Country: eu
SN: LCL021XXXXXXXXX
PCB SN: 025DGTXXXXXX
WIFI MAC: 8811XXXXXX
BT MAC: 8811XXXXXXX
Theme color: black
Device color: black
FBLOCK: 1
Bootloader FB lock: unlocked
Bootloader User lock: locked
Found signed IMEI:
IMEI1: 867259XXXXXXXX
IMEI2: 867259XXXXXXXX
SIM NW_LOCK status: UNLOCKED
Found NV data:
Modems: 3
IMEI1: 86725XXXXXXXXX
IMEI2: 86725XXXXXXXXX
IMEI3: 000000000000000
PESN: 8022XXXX
MEID: A0000093XXXXX
Found OEM data:
Model: CLT-L09
Firmware: CLT-L09 9.0.0.168(C782E3R1P9)
Rescue: rescue:Chipset-boston 8.1.0.001(01FL)
Vendor: hw
Country: eu
Version limitation: ON
SIMCARDMODE: single
Bootloader User lock: locked
Click to expand...
Click to collapse
25/01/2021 22:52:35
HCU Client v1.0.0.0372
Account: shortyzsly
Before operation turn phone to TestPoint mode:
Turn off phone, then short TestPoint on phone pcb
and plug USB cable
Wait for device "HUAWEI USB COM 1.0" in Ports
Repair
New FB User Lock : UNLOCKED
New downgrade/customization limitations : UNLOCKED
Selected Cpu/Bootloader - Kirin970_T1_A8.1_V6
2021-01-25 22:52:36.442 Connecting to server...
2021-01-25 22:52:36.708 Connected!
2021-01-25 22:52:37.330 HUAWEI device in Test Point mode Not found!
2021-01-25 22:52:37.402 Reading info...
2021-01-25 22:52:41.275 Done!
Fastboot provided info:
CPU: kirin970
Model: CLT-L09
Firmware: CLT-L09 9.1.0.372(C782E12R1P11)
Vendor: hw
Country: eu
SN: LCL0218717XXXX
PCB SN: 025DGT187D00XXX
WIFI MAC: 88119XXXX
BT MAC: 8811966XXXX
Theme color: black
Device color: black
FBLOCK: 1
Bootloader FB lock: unlocked
Bootloader User lock: locked
Found signed IMEI:
IMEI1: 8672590XXXXX
IMEI2: 8672590XXXXX
SIM NW_LOCK status: UNLOCKED
Found NV data:
Modems: 3
IMEI1: 86725903XXXXXX
IMEI2: 867259035XXXXX
IMEI3: 000000000000000
PESN: 80221B5B
MEID: A00000934BCC82
Found OEM data:
Model: CLT-L09
Firmware: CLT-L09 9.0.0.168(C782E3R1P9)
Rescue: rescue:Chipset-boston 8.1.0.001(01FL)
Vendor: hw
Country: eu
Version limitation: ON
SIMCARDMODE: single
Bootloader User lock: locked
Phone ID: 80A0E6XXXXXXXX
2021-01-25 22:52:45.590 Repairing...
2021-01-25 22:52:45.598 Write FB User lock not supported for this model, skipped!
2021-01-25 22:52:45.611 Write partition oeminfo...
2021-01-25 22:52:47.468 Write partition oeminfo success!
2021-01-25 22:52:47.494 Unlocking restrictions...
2021-01-25 22:52:47.511 Unlock restrictions success!
2021-01-25 22:52:47.514 Done!
Click to expand...
Click to collapse
Basically what I wanna know is, is she dead and gone or can she be saved?
As it turns out, I think it may be an issue with the loader I may have tried to flash 8.1 and it was on 9.1. Any help when you get a chance anyone who's has the same issue. I searched the forums can't find my exact issue.
i have rolled back to android 8,1 and used Kirin970_T2_A8.0_V3 in dc phoenix and hcu client.
first activated software tespoint and then used hcu with this ^^loader.
Screen comes back and i can see both status unlocked. Can flash TWRP with fastboot command with succes message but after reboot, trwp is erased i think through erecovery and Phone ist locked again. I am still trying to unlock it. Dont know why it shows unlocked and after reboot or deactivating Software testpoint again is locked.
Sorry for my bad english.
gefechtseule said:
i have rolled back to android 8,1 and used Kirin970_T2_A8.0_V3 in dc phoenix and hcu client.
first activated software tespoint and then used hcu with this ^^loader.
Screen comes back and i can see both status unlocked. Can flash TWRP with fastboot command with succes message but after reboot, trwp is erased i think through erecovery and Phone ist locked again. I am still trying to unlock it. Dont know why it shows unlocked and after reboot or deactivating Software testpoint again is locked.
Sorry for my bad english.
Click to expand...
Click to collapse
So you mean to say you also had this issue?! I thought I was boned. There may be hope yet Thank you i will report back <3
Hello,
Is this the correct forum for troubleshooting the rooting of this device?
I was able to install the Samsung drivers on a PC[check]
enable developer mode[check]
enable usb debugging [check]
unlock oem bootloader [check] (Initially it was hidden but there was a fix for that by changing from automatic to manual system date/time from 7 days prior
The process for unlocking the bootloader is more involved for this device as you need to power off the device and hold BOTH the up/down volume keys
until the boot firmware splash screen shows up. At this point you can plug the usb cable back in and successfully unlock the bootloader by pressing the up volume button.
This series of steps is described here:
http://forum.xda-developers.com/t/samsung-galaxy-tab-a-8-0-sm-t290-2019-unable-to-unlock-bootloader.42472271
The problem now is that flashing the correct version of TWRP (Using the Odin Tool) seems to be producing a screen within the !!download!! mode of the
bootloader which doesn't finish flashing the recovery.img. This was attempted using the Odin Tool and a version of TWRP which may or may not have been the
correct version. Looking to find the correct version for this device and use the Odin to to flash it in the
bootloader screen.
Right now, when rebooting, there is an error message: Secure Check Fail: recovery.img
Any assistance is appreciated