Hi, just got a google glass xe-c a few days ago. It had a problem with wifi not connecting, trying to activate it using qr code gave an error "cannot connect to network" I had to activate it using mobile data in tether mode. Wifi settings card is always stuck on "turning on" everything else worked fine adb , fastboot hardware buttons etc.
I restored the factory image "xe23" from the official website but no change in wifi status. Today I got the bright idea to "downgrade" it.
just to have a look at older firmware and i thought maybe it would help with my wifi issue so i downloaded and flashed "xe10"
turns out it did not have the "activate using mobile data " feature and only way to activate it is using wifi, so i am stuck at activation screen. I tried pressing camera + power buttons to go into fastboot mode and it wont.
If i disconnect the usb cable , power off the device then hold down camera button and press power button, power led turns on , I release the power button while still holding camera button after a few seconds led is supposed to flash instead it just turns off and after that if i connect the usb cable nothing happens.
I also tried another approach, If i keep the usb cable to the pc, then power down and press the camera +power buttons , led again turns on , pc dectects the glass in fastboot but only for a second , again led turns off and thats it.
Related
after replacing a dead digitizer LCD screen, now the power button is gone...
is there an alternative way to turn the diamond on?
I have tried hitting the reset button or connecting it to the computer, but nothing worked...
the guy who fixed my phone somehow got it to run yesterday, and he told me that he did it by putting it into flash mode
did he mean bootloader mode? but without the power button, how do I access the bootloader mode?
I need your help!! THANKS!!
I have same problem. please help....!!!!!
Pull out the stylus. It should turn on automatically
Nope
That won't work if the diamond is turned off-off.
i've tested : connect your diamond on the pc, and pull off the batterie and reconnect her (2 or 3 x) and at a moment the mobile turn on.
Hey everyone,
I apologise if this has been asked many times before; but I need some assistance with my HTC one M7.
I was using the phone with low battery - with power saver turned on, it turned off completely after a few moments.
I have put the phone on charge, but the LED indicator is not showing up nor the phone turning on or charging at all.
I went through forums, and tried the power button + volume down button to bring up the boot menu, this menu did actually appear - but me being the fool I am - I selected the power down option.
I have been unable to bring the menu up again with the power + volume button combination.
I then connected the phone to my PC - where its installs a driver - qhsusb_dload. I have tried the power + volume button combination with it being connected to my PC - where I hear the device detected bing and device disconnected bing while I hold these buttons down, still unable to charge/power on/ or bring up the boot menu.
I have also left the phone on wall charger for over 12 overs again to no avail.
Can anyone provide any advice - or any method I can salvage the data stored on it i.e. photos?
Thanks for reading - appreciate any help!
AntMans123 said:
I then connected the phone to my PC - where its installs a driver - qhsusb_dload.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=67835309&postcount=2805
any method I can salvage the data stored on it
Click to expand...
Click to collapse
Not possible if its not booting...
AntMans123 said:
Hey everyone,
I apologise if this has been asked many times before; but I need some assistance with my HTC one M7.
I was using the phone with low battery - with power saver turned on, it turned off completely after a few moments.
I have put the phone on charge, but the LED indicator is not showing up nor the phone turning on or charging at all.
I went through forums, and tried the power button + volume down button to bring up the boot menu, this menu did actually appear - but me being the fool I am - I selected the power down option.
I have been unable to bring the menu up again with the power + volume button combination.
I then connected the phone to my PC - where its installs a driver - qhsusb_dload. I have tried the power + volume button combination with it being connected to my PC - where I hear the device detected bing and device disconnected bing while I hold these buttons down, still unable to charge/power on/ or bring up the boot menu.
I have also left the phone on wall charger for over 12 overs again to no avail.
Can anyone provide any advice - or any method I can salvage the data stored on it i.e. photos?
Thanks for reading - appreciate any help!
Click to expand...
Click to collapse
If you get it to go into that boot menu again. You sometimes have to hold the power and volume down for about 15 seconds, then release them and again start holding the volume down. This is something I had to do to get into recovery back when my bootloader was still locked.
The power may not coming on, but if you are getting usb sounds from plugging it in maybe the computer you are connecting to could be switched.
I had hard times connecting before from certain machines cause they wanted to run an HTC Sync program. You could try a different machine.
Often people say regarding the behavior of the 3.0 vs 2.0 USB ports, that it is 2.0 that will work. And you might try a Vista machine to get fastboot working.
kruc Ire said:
If you get it to go into that boot menu again. You sometimes have to hold the power and volume down for about 15 seconds, then release them and again start holding the volume down. This is something I had to do to get into recovery back when my bootloader was still locked.
The power may not coming on, but if you are getting usb sounds from plugging it in maybe the computer you are connecting to could be switched.
I had hard times connecting before from certain machines cause they wanted to run an HTC Sync program. You could try a different machine.
Often people say regarding the behavior of the 3.0 vs 2.0 USB ports, that it is 2.0 that will work. And you might try a Vista machine to get fastboot working.
Click to expand...
Click to collapse
qhsusb_dload is a well known issue, not caused by the computer you are coonecting to. Its can be caused by a bad firmware flash (flashing an incompatible firmware.zip) or because of an hardware failure. Easy to know what is the cause. Did the phone randomly went in qhsusb_dload mode? Yes ---> Hardware,will most likely need a motherboard replacement. Did the phone went in qhsusb_dload directly after flashing something? Yes ---> Software problem can be fixed with the unbrick project.
Hi, I was doing a backup on the PC, the phone went off and started at Erecovery, I gave it to restart and after several attempts it stopped turning on. I press the volume keys + and - and it does not turn on, it does not vibrate, it does not charge or the LED lights. It only sounds when I connect it to the computer, as if I were connecting a pendrive. Version 9 beta.
It has 3 months of use and has a guarantee, but I wanted to know if there was any way to get it back without having to send it to the technical service.
After i tried to solve another issue with a custom Rom and installed a TWRP for Hades Rom, my S10e doesn't start normal, download mode also doesn't work.
Only thing is, if I press Power + Bixby and Vol down, it vibrates and the Samsung logo appears shortly.
After that the PC (if USB is connected) shows the folders but display of the phone is still black.
Funnily i can tab on the phone screen and it vibrates on some areas, so I assume it is in TWRP but with a black display.
I'm completely stuck now, searched a few hours on google and XDA for a solution but nothing works.
Power and Vol down mages a restart, if USB is connected the folder appears after a fw seconds on the PC, Display still black. When i tab on the phone it vibrates but no display, so no idea what i'm doing.
Download mode or "visible" TWP doesn't work, tried also several button combinations, nothing works.
So, how can i get in download mode to do a reflash? I've no data on the phone so wiping is no problem. Any ideas?
Edit 1: It seems i could solve the issue by draining the battery completely and go into download mode afterwards, so - solved for now
Bump, having the same issue
Hold power and volume down to get out the black screen
I managed to solve it!
simple!
hold down and power for it to restart, at the exact moment when it restarts, you press the two volumes, up and down, and connect the usb cable right after, before turning on, then a menu appears where you can hold up for 7 seconds and unlock the bootload
what does the exact moment mean? And it connect the usb cable for odin?