Related
Hello i was using this guide :
http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
to root my phone i went and finished fastboot oem unlock step
the problem is after it and booted the phone i extracted the root files and clicked on it
then realized it said oem is not enabled in developer option
so now when i boot the phone a message says"Your Device is Corrupt. It can't be trusted and may not work properly."
and after it like 1-2 sec it turns off
i can still boot in bootloader
PLEASE SOME ONE HELP ME
Also it says device is unlocked in the bootloader statues code 3
extra information i was using android marshmallow 6 latest firmware
oudric said:
Hello i was using this guide :
http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
to root my phone i went and finished fastboot oem unlock step
the problem is after it and booted the phone i extracted the root files and clicked on it
then realized it said oem is not enabled in developer option
so now when i boot the phone a message says"Your Device is Corrupt. It can't be trusted and may not work properly."
and after it like 1-2 sec it turns off
i can still boot in bootloader
PLEASE SOME ONE HELP ME
Also it says device is unlocked in the bootloader statues code 3
extra information i was using android marshmallow 6 latest firmware
Click to expand...
Click to collapse
The same thing happened to me when I tried to use a rootkit method for rooting the phone when it apparently knew nothing about the most recent updates (MRA58N or MRA58R). I ended up having to manual flash each individual image file from the MRA58N factory image (the flash-all script in the factory image zip wouldn't work). Even so, when I rebooted it still displayed the Your Device is Corrupt message. Then I went through the manual root process again (flashed the modified boot.img through fastboot, then flashed the latest TWRP recovery via fastboot, and then used TWRP to flash the latest SuperSU. Only then did the Your Device is Corrupt message go away and I also had root with everything else working fine.
It definitely made for an un-Godly horrible first 24-hours with my new phone! I hope this helps you.
internetpilot said:
The same thing happened to me when I tried to use a rootkit method for rooting the phone when it apparently knew nothing about the most recent updates (MRA58N or MRA58R). I ended up having to manual flash each individual image file from the MRA58N factory image (the flash-all script in the factory image zip wouldn't work). Even so, when I rebooted it still displayed the Your Device is Corrupt message. Then I went through the manual root process again (flashed the modified boot.img through fastboot, then flashed the latest TWRP recovery via fastboot, and then used TWRP to flash the latest SuperSU. Only then did the Your Device is Corrupt message go away and I also had root with everything else working fine.
It definitely made for an un-Godly horrible first 24-hours with my new phone! I hope this helps you.
Click to expand...
Click to collapse
can you please tell me steps i am so afraid to do anything to my phone now and i think my problem is same as yours
i downloaded 6.0.0 (MRA58R) and i used option in toolkit flash stock it gave me an error
"failed (data transfer failure (unknown error))
Its not so easy to brick nexus, but make sure you don't lock bootloader before your phone is working right. You can find the guide how to flash it on XDA.
You will need to flash the missing files by hand.
I was able to fix the erro i got by flashing by :
setting up environmental variable
copy all the flash files, all.bat bootloaderXXX.img... etc to platform tools folder
made sure i connected into usb 2.0 port not usb 3.0
then i flashed the stock firmware XD now my phone to point zero again
oudric said:
I was able to fix the erro i got by flashing by :
setting up environmental variable
copy all the flash files, all.bat bootloaderXXX.img... etc to platform tools folder
made sure i connected into usb 2.0 port not usb 3.0
then i flashed the stock firmware XD now my phone to point zero again
Click to expand...
Click to collapse
You don't need to move the files to the platform-tools folder.
Go to Nexus 6 General > Sticky rol-up thread > Adb and fastboot. What is it?
This will tell you how to set up and use adb or fastboot properly.
i have been rooting my phone since the galaxy s5 and the last phone i was able to root was the moto x4. that was a couple years ago and have been using a moto z3 (not play) then switched to the galaxy s10+. i feel like a complete noob all over again tbh :laugh: i remember the moto x4 had the a/b partition and see that this phone uses the same thing. so i know i cant flash twrp, i unlocked my bootloader and was able to boot into twrp, after i get there i feel lost on what to do next to install magisk. can anyone help me out a little, i miss having superuser privileges so any help how to get it installed and booted up will be greatly appreciated. thanks in advance!
I'm not sure if I can help you. I have Z3 Play and I got my bootloader unlocked by Motorola. I thought the Moto Z3 (non-play) sold by Verizon was unlockable. I would triple check that is the case. Everytime the phone starts, it complains for a couple of seconds that the bootloader is unlocked. This is true with the phone being stock.
On the Z3 Play,
To root the phone, you do *NOT* need TWRP. It will just break everything with future updates. You need the current fastboot flash files for your phone, and magisk app. I get the fastflash os files with the Lenovo Moto Smart Assistant. If there is a upgrade available, it will download the latest, otherwise you will need to get it download the rescue file and select model to get it to download your files.. Once the files are in hand. In windows 10, it places them in C:\ProgramData\LMSA\Download\RomFiles\ folder. You are interested only in the boot.img file, and you need to copy that file to your phone somehow. With the magisk app installed(it's not in gplay store, search for magisk on xda) and running, the app does not require root to run, click Magisk Install. Then at the next popup click Install, and the next popup select "Select and Patch a File", and navigate to the boot.img you copied over to your phone. Once the file is patched, navigate to the internal\Downloads\magisk_patched.img and copy this file back to your pc. Verify that it's not a 0 byte file size. Magisk creates the patched file with some weird read permissions.
Assuming you have the *entire* moto os version already already installed on your phone, that matched the boot.img you copied to your phone. It's safe to go ahead and upgrade with the LMSA utility, then patch boot afterwards. It's just involved getting the os flash files, that match your specific phone model.
Then with adb or optionally, put the phone in rescue mode manually
adb reboot bootloader
wait for the phone to rebooted to rescue mode
fastboot flash boot magisk_patched.img
fastboot reboot
All done. Be sure to back everything up prior to starting. Unless you have messed up with the twrp installs of magisk, lenovo moto smart assistant normally will install updates without wiping the phone. You just have to go through that minor step of patching the boot.img and reflashing it. I haven't tried to overwrite the boot.img it downloads, with the the magisk patched, to skip that step. Because you need fastboot flash files goin forward, it's best to freeze the motorola update service, and manually update with a pc. Normally ota updates just fail anyways. Originally, I made the mistake of installing magisk with twrp and that prevented updates from being applied with lenovo moto smart assistant. I had to do the manual all fastboot install of the entire moto os, with a complete wipe. These steps are outline in great detail in other messages.
I'm not sure how much of this applies to the Z3 non play, so proceed at your own risk. If it was my phone, I would research it more.
I just picked up a Verizon Z3 Play and have been struggling to unlock the bootloader. I do everything in Ubuntu and have used ADB and Fastboot from the repository forever and have used them on Motos, Sammies, ZTEs, and LGs. I even used them on a MotoG7. I could not get fastboot boot to work on the VZ3Play. I was sure Verizon changed the bootloader so you could not use fastboot. I dusted off my old Windows laptop, installed the lenovo drivers and used mfastboot and it worked without an issue. My VZ3Play has an unlocked bootloader and I flashed a Magisk Modified Bootloader. All is good. Not sure what's wrong with the VZ3Play's bootloader and linux just glad I got it done.
Magisk is the new superuser, it is the one that allows root access, so after you've installed Magisk and booted normally, open the manager app and go to the superuser tab to see which app has been granted access
gedster314 said:
I just picked up a Verizon Z3 Play and have been struggling to unlock the bootloader. I do everything in Ubuntu and have used ADB and Fastboot from the repository forever and have used them on Motos, Sammies, ZTEs, and LGs. I even used them on a MotoG7. I could not get fastboot boot to work on the VZ3Play. I was sure Verizon changed the bootloader so you could not use fastboot. I dusted off my old Windows laptop, installed the lenovo drivers and used mfastboot and it worked without an issue. My VZ3Play has an unlocked bootloader and I flashed a Magisk Modified Bootloader. All is good. Not sure what's wrong with the VZ3Play's bootloader and linux just glad I got it done.
Click to expand...
Click to collapse
Not sure how much you have tried but when I used Ubuntu with adb, it required different files and different permissions. I figured out you need to type whole file names ( with the . Whatever at the end)
Not sure what's wrong with the VZ3Play's bootloader and linux just glad I got it done.
Click to expand...
Click to collapse
There's Linux version of mfastboot.
jwoodman1358 said:
I'm not sure if I can help you. I have Z3 Play and I got my bootloader unlocked by Motorola. I thought the Moto Z3 (non-play) sold by Verizon was unlockable. I would triple check that is the case. Everytime the phone starts, it complains for a couple of seconds that the bootloader is unlocked. This is true with the phone being stock.
On the Z3 Play,
To root the phone, you do *NOT* need TWRP. It will just break everything with future updates. You need the current fastboot flash files for your phone, and magisk app. I get the fastflash os files with the Lenovo Moto Smart Assistant. If there is a upgrade available, it will download the latest, otherwise you will need to get it download the rescue file and select model to get it to download your files.. Once the files are in hand. In windows 10, it places them in C:\ProgramData\LMSA\Download\RomFiles\ folder. You are interested only in the boot.img file, and you need to copy that file to your phone somehow. With the magisk app installed(it's not in gplay store, search for magisk on xda) and running, the app does not require root to run, click Magisk Install. Then at the next popup click Install, and the next popup select "Select and Patch a File", and navigate to the boot.img you copied over to your phone. Once the file is patched, navigate to the internal\Downloads\magisk_patched.img and copy this file back to your pc. Verify that it's not a 0 byte file size. Magisk creates the patched file with some weird read permissions.
Assuming you have the *entire* moto os version already already installed on your phone, that matched the boot.img you copied to your phone. It's safe to go ahead and upgrade with the LMSA utility, then patch boot afterwards. It's just involved getting the os flash files, that match your specific phone model.
Then with adb or optionally, put the phone in rescue mode manually
adb reboot bootloader
wait for the phone to rebooted to rescue mode
fastboot flash boot magisk_patched.img
fastboot reboot
All done. Be sure to back everything up prior to starting. Unless you have messed up with the twrp installs of magisk, lenovo moto smart assistant normally will install updates without wiping the phone. You just have to go through that minor step of patching the boot.img and reflashing it. I haven't tried to overwrite the boot.img it downloads, with the the magisk patched, to skip that step. Because you need fastboot flash files goin forward, it's best to freeze the motorola update service, and manually update with a pc. Normally ota updates just fail anyways. Originally, I made the mistake of installing magisk with twrp and that prevented updates from being applied with lenovo moto smart assistant. I had to do the manual all fastboot install of the entire moto os, with a complete wipe. These steps are outline in great detail in other messages.
I'm not sure how much of this applies to the Z3 non play, so proceed at your own risk. If it was my phone, I would research it more.
Click to expand...
Click to collapse
I tried install magisk with your guide but it causes bootloop. I have newest firmware and newest Magisk. But when I tried to flash Magisk via TWRP it works fine.
I just received my direct from Google Pixel 4 XL running the June 2020 update and proceeded to root it using the instructions found here https://www.xda-developers.com/google-pixel-4-root-magisk/ after flashing the patched boot.img and rebooting the phone doesn't boot past the G logo; the status bar just loops indefinitely. Is there something I'm missing? Any help would be much appreciated.
I have no modules loaded, no custom kernel or ROM.
Go to recovery and reset the phone,
And reboot the phone in each steps
The guide looks mostly like what I do every month, though I haven't done June yet.
I don't think this will solve your issue, but usually I flash the patched boot image to both slots as Magisk in-place updates seem to fail if I don't...
Code:
fastboot flash boot magisk_patched.img --slot=all
I assume you didn't have any obvious issues with the guide steps aside from not booting after Step 5?
Make sure your platform tools are the newest you can get. Also make sure that you didn't get the Telstra variant of the June update.
If all else fails, try to revert by dirty flashing the (correct) June 2020 stock ROM. You'll only lose root if you do it correctly. (you don't have working root anyways)
Take the giant ZIP file you downloaded to get the boot image, merge it with platform tools and edit the flash-all.bat file... near the bottom, remove the "-w " from the command so it reads
Code:
fastboot update image-coral-qq3a.200605.001.zip
Save the changes and run the .bat file after booting the phone to fastboot and making sure its visible to platform tools.
jljtgr said:
The guide looks mostly like what I do every month, though I haven't done June yet.
I don't think this will solve your issue, but usually I flash the patched boot image to both slots as Magisk in-place updates seem to fail if I don't...
Code:
fastboot flash boot magisk_patched.img --slot=all
I assume you didn't have any obvious issues with the guide steps aside from not booting after Step 5?
Make sure your platform tools are the newest you can get. Also make sure that you didn't get the Telstra variant of the June update.
If all else fails, try to revert by dirty flashing the (correct) June 2020 stock ROM. You'll only lose root if you do it correctly. (you don't have working root anyways)
Take the giant ZIP file you downloaded to get the boot image, merge it with platform tools and edit the flash-all.bat file... near the bottom, remove the "-w " from the command so it reads
Code:
fastboot update image-coral-qq3a.200605.001.zip
Save the changes and run the .bat file after booting the phone to fastboot and making sure its visible to platform tools.
Click to expand...
Click to collapse
Your first suggestion results in the phone booting, but ending up on a black screen with only the power menu
dirty flashing results in a successful unrooted boot, but rooting seems to not be possible for some users including myself. No clue why
Try flashing the patched boot to both boots but don't use the all slots command, do them one at a time, A, then B. See if that gets it.
So I am a fool.
I didn't run these commands using the latest "platform-tools"
but I will remember this instructions if I have issues in the future!
I am on latest platform tools and have tried all options presented and still get black screen with adb access and power menu. Other thoughts?
I just downloaded the full image and was getting ready to patch the boot image and flash it on my 2 day old Pixel 4xl. Maybe I will wait unless others have had success with this. I am on the June update. I made sure I didn't download the Telstra version.
Is there any reason to not just use the "Download Zip" option in Magisk? That always worked fine for me on my last phone.
Thanks, Chris
---------- Post added at 06:27 PM ---------- Previous post was at 06:12 PM ----------
I took the plunge and it booted just fine. I am on a G020J if that help. Hardware MP1.0.
I did not realize that TWRP was not available for the Pixel 4xl yet. What is everyone using for a custom recovery?
reedc83 said:
I just downloaded the full image and was getting ready to patch the boot image and flash it on my 2 day old Pixel 4xl. Maybe I will wait unless others have had success with this. I am on the June update. I made sure I didn't download the Telstra version.
Is there any reason to not just use the "Download Zip" option in Magisk? That always worked fine for me on my last phone.
Thanks, Chris
---------- Post added at 06:27 PM ---------- Previous post was at 06:12 PM ----------
I took the plunge and it booted just fine. I am on a G020J if that help. Hardware MP1.0.
I did not realize that TWRP was not available for the Pixel 4xl yet. What is everyone using for a custom recovery?
Click to expand...
Click to collapse
I feel like the options inside Magisk are for phones that are already rooted to update Magisk. I guess what your edit is saying is that you used to use TWRP with the ZIP?
Anyways, there are no custom recoveries for the same reason there is not TWRP. The partition scheme for Pixel phones that come with Android 10 pre-installed is too different for TWRP to live on it. I don't know enough about this subject, but I thought I read there was no separate recovery partition that could be made custom.
Everyone has been doing it all along, when people have issues it's usually the wrong boot image, wrong complete image, flashed boot image to wrong slot, used the factory cable (yes, it's a thing, don't use it or flashing), don't have the correct and/or latest tools. There was an issue with windows 8.1 and flashing, I don't remember what that was but those of you flashing and still on 8.1 you'll want to do a search for that.
@Brakiss, you may want to try the whole smash if all else has failed... THIS WILL DELETE YOUR DATA!
Start by going over to Goog ---> https://developers.google.com/android/images and getting the full factory image and the latest tools; even if you already did it do it again being careful to verify you have the correct image. While you're grabbing goods get the Magisk APK so you can install it after the image is flashed. For the flashing portion please follow the directions on that page to the letter. Do not use the factory cable; use an A to C. Before you flash run these commands one at a time
fastboot erase system_a
fastboot erase system_b
fastboot erase boot_a
fastboot erase boot_b
fastboot reboot-bootloader
After flashing get the boot image directly from the factory image you downloaded and not any other source and move it over to your phone along with the Magsik APK. Install magisk manager and then use it patch the boot image. You'll take that over to your PC and flash it as usual but do it to both slots and do them separately, do not use the all slots.
jljtgr said:
I feel like the options inside Magisk are for phones that are already rooted to update Magisk. I guess what your edit is saying is that you used to use TWRP with the ZIP?
Anyways, there are no custom recoveries for the same reason there is not TWRP. The partition scheme for Pixel phones that come with Android 10 pre-installed is too different for TWRP to live on it. I don't know enough about this subject, but I thought I read there was no separate recovery partition that could be made custom.
Click to expand...
Click to collapse
Correct, there is no recovery partition anymore. That has been a thing for a while now and not specific to the Pixel. My Moto x4 that I used prior to the Pixel 4xl had the recovery in the boot image but there was still TWRP for it. Whenever rooting that phone you have to boot a custom recovery image then from in there flash the separate custom recovery image/zip installer. It would modify the recovery that is embedded into the boot image.
I really hope that devs smarter than myself will figure it out and make a way to get TWRP on there.
On Android 11 Beta 2.5, I patch the original boot image, I then send it via fastboot, I tried flashing all partitions, manually _a and _b and stuck on Google logo ... When I put back the original boot.img, everything works properly. Miss my root but haven't seen any help on this :| Worked until I switched to 11 Beta ...
I have the problem too
Just as Chronos300 reported, I got stuck on the G logo. Some of my problem may be self-inflicted since I was not careful enough in following the directions: evidently it's important to finish the process for unlocking the bootloader before going to fastboot again to flash the Magisk boot image. I got stuck on the G logo but thought that I would have my way out by flashing the July factory image.
Most of that process worked out: things were good until the end when I saw a lot of messages about files that aren't present in image-coral-qq3a.200805.001.zip like boot.sig or recovery.img. I guess these are optional: the *.sig files may be intended to contain a checksum or hash and the recovery.img may just have gone away with the recovery partitions. Finally was an error that was fatal:
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
Click to expand...
Click to collapse
That's awful cheery. I see that the difference between flash-all.sh and flash-base.sh is that the former has the "fastboot -w update" that Shayded talks about. I tried running the update command as Shaded recommends, without the -w switch. This time it got farther, but this time the final message was "failed to extract 'product.img': I/O error"
Sure enough, image-coral-qq3a.200805.001.zip contains no product.img file. Is this my problem, or is the solution somewhere else? Would an older factory image have the missing file?
Sigh of relief
My phone's back in the land of the living. I had noticed the links on the factory-image page for the flash tool. Thinking that maybe these were better maintained, I thought to try out the August update for coral.
The flash tool downloaded whatever big image it grabs and then started into the installation. After a few minutes the fastbootd screen came up and the progress bar went to about 80%--and then everything hung. Hoping on hope, I decided I could leave it like this all night if I had to.
It might have taken half an hour, but it did finally come up with the screen saying everything had updated. Sure enough, it made it through the boot and came up to the setup screens.
Enabled developer mode, saw that the bootloader was indeed unlocked, and went about setting some settings. Haven't tried root yet, but it's sure great to be back in business!
epic_task said:
{...}
Sure enough, image-coral-qq3a.200805.001.zip contains no product.img file. Is this my problem, or is the solution somewhere else? Would an older factory image have the missing file?
Click to expand...
Click to collapse
Personally, I don't understand how you ended up without product.img... it's literally half of the internal ZIP file. (you're not supposed to extract this ZIP, anyways)
jljtgr said:
Personally, I don't understand how you ended up without product.img... it's literally half of the internal ZIP file. (you're not supposed to extract this ZIP, anyways)
Click to expand...
Click to collapse
No, I never altered that zip file and was not trying to extract individual files from it when making that final run of fastboot update.
What I can tell you is that I was sleepy by the time I was doing that. There were two things I missed noting at the time but see this morning: product.img is indeed in the internal zip file and a message a couple of lines above the final error message (I had left the terminal window open):
extracting product.img (2102 MB) to disk...ziparchive W 08-18 00:00:43 31524 31524 Zip: unable to allocate 2204832024 bytes at offset 0: No space left on device
Click to expand...
Click to collapse
I would think that my failing to wait for a complete boot with an unlocked bootloader before attempting to flash magisk_patched.img did something unfortunate to the partitioning scheme. Evidently the web-based flash tool cleared it up.
Maybe I'm suggesting the obvious... but do you have 2-4GB available on every drive? It's complaining there's no available space. Typically product.img is split into 500MB parts and sent separately... so you'd need at least 2x the space available for the parts.
The flash-all is generic and looks for some files which are not used by these phones. This failure described is usually the wrong cord, you must use a USB A to USB C rather than a C to C. If not that it's going to be a tools/driver issue. There are a number of guides which can show how to find and delete old drivers and reinstall new drivers. Removing the W gets rid of the wipe but doesn't otherwise affect the flashing and will have nothing to do with it's success or failure; you are in effect dirty flashing when you remove it from the flash-all.
I'm asking for help because this has happened for two months now, and I'm wondering if the process has changed with the new unified Magisk.
The March Android 11 update has been posted, so -- just as I did in February::
1. On my computer, I
1a. Downloaded the factory image;
1b. Extracted the boot.img; and
1c. Sent it to my phone's Download folder.
2. On my phone, I
2a. Had Magisk "patch (the) selected file";
2b. Transferred the new patched boot image, magisk_patched_FKPSk.img, back to the computer; and
2c. Put the phone into fastboot mode.
3. Back on my computer, in adb, performed the "fastboot flash boot magisk_patched_FKPSk.img."
adb successfully flashed to boot_a, then I rebooted the phone. It rebooted surprisingly quickly.
Going into "System / Advanced / System Update," it still says
Android security update: January 5, 2021
So, what am I doing wrong? Should I force adb to flash to boot_b instead?
Thanks for any ideas!
NickEspo said:
I'm asking for help because this has happened for two months now, and I'm wondering if the process has changed with the new unified Magisk.
The March Android 11 update has been posted, so -- just as I did in February::
1. On my computer, I
1a. Downloaded the factory image;
1b. Extracted the boot.img; and
1c. Sent it to my phone's Download folder.
2. On my phone, I
2a. Had Magisk "patch (the) selected file";
2b. Transferred the new patched boot image, magisk_patched_FKPSk.img, back to the computer; and
2c. Put the phone into fastboot mode.
3. Back on my computer, in adb, performed the "fastboot flash boot magisk_patched_FKPSk.img."
adb successfully flashed to boot_a, then I rebooted the phone. It rebooted surprisingly quickly.
Going into "System / Advanced / System Update," it still says
Android security update: January 5, 2021
So, what am I doing wrong? Should I force adb to flash to boot_b instead?
Thanks for any ideas!
Click to expand...
Click to collapse
That doesn't have anything to do with Magisk. That's the firmware update you are on. If you want on a newer one you will to flash it. Then follow your previous steps. Magisk doesn't update your firmware for you.
Tulsadiver said:
That doesn't have anything to do with Magisk. That's the firmware update you are on. If you want on a newer one you will to flash it. Then follow your previous steps. Magisk doesn't update your firmware for you.
Click to expand...
Click to collapse
Ah. So then, if I understand correctly, the process is to unroot, sideload the OTA image (not just flash the factory image's boot.img file) via adb, and then perform the above steps to re-root?
NickEspo said:
Ah. So then, if I understand correctly, the process is to unroot, sideload the OTA image (not just flash the factory image's boot.img file) via adb, and then perform the above steps to re-root?
Click to expand...
Click to collapse
Yes, though I normally fastboot the factory images rather than sideload an ota. That update process will lose root, then you patch the boot.img and fastboot it to regain root. I would recommend removing all modules prior to updating as they will survive the update process (unless you wipe) and if not compatible with your update, will bootloop you once you root again.
I successfully flashed my European oneplus 10 pro using the instructions - see link below.
Everything worked VERY WELL, except texts/sms I could'nt receive but could send.
I spend hours and hours making it perfect.
I had the perfect phone.
So if someone wants to know how to use lineageos with full GAPS, just follow the link below.
Then being so STUPID, for no need and no reason I continued following the same instructions and tried to root the phone.
And then this disaster happened that boot is looping and I cannot run: fastboot reboot fastboot.
Meaning that I cannot repair my phone.
All I can do is push the volume down and go to recovery mode. That's all.
My PC can send fastboot commands but I cannot go to the menu where it's chinese and english and from which I could run commands to flash my phone properly back to where it was.
I don't care loosing the data and loosing so many hours of effort, but I REALLY need my phone back to work.
This is the link from this forum to the instructions that really helped me with my Oneplus 10 pro (that I bought by mistake).
LINK THAT WORKS WITH ONEPLUS 10 PRO AND LINEAGE 19.
How to flash a GSI on Oneplus 10 PRO/T
MAKE A BACKUP THIS WILL WIPE ALL YOUR DATA! Check your warrenty> IF YOU BRICK IS YOUR OWN RESPONSIBILIT! What does not work? Fingerprint face unlock native camera app(Use gcam) no notification slider no modular refresh rate no auto...
forum.xda-developers.com
and this is where I CRUSHED down by running this:
The rootingget you latest magisk here
Install it on your phone
transfer the boot.img you extracted to your phone
open magisk and install it on the boot.img
the patched boot img will be in the download folder move it to your pc
open the fastboot tools folder and open a terminal
adb reboot bootloader fastboot flash boot magisk_patched.img
when your booted open magisk and direct install magisk.
than just reboot
Modules you'll need
BootloopSaver
safetynet-fix
Shamiko
and enable zygisk in the magisk settings.
THANK YOU FOR YOUR HELP !!!
This should work for you
Note: You are already in FastbootD (Recovery).
Follow the steps on this site to Flash A stock ROM above using the Fastboot Enhance Tool
https://www.droidwin.com/flash-stoc...-brick/#STEP_1_Download_Fastboot_Enhance_Tool
Feel free to download Fastboot Enhance Tool.zip (backup location)
yedashare said:
I successfully flashed my European oneplus 10 pro using the instructions - see link below.
Everything worked VERY WELL, except texts/sms I could'nt receive but could send.
I spend hours and hours making it perfect.
I had the perfect phone.
So if someone wants to know how to use lineageos with full GAPS, just follow the link below.
Then being so STUPID, for no need and no reason I continued following the same instructions and tried to root the phone.
And then this disaster happened that boot is looping and I cannot run: fastboot reboot fastboot.
Meaning that I cannot repair my phone.
All I can do is push the volume down and go to recovery mode. That's all.
My PC can send fastboot commands but I cannot go to the menu where it's chinese and english and from which I could run commands to flash my phone properly back to where it was.
I don't care loosing the data and loosing so many hours of effort, but I REALLY need my phone back to work.
This is the link from this forum to the instructions that really helped me with my Oneplus 10 pro (that I bought by mistake).
LINK THAT WORKS WITH ONEPLUS 10 PRO AND LINEAGE 19.
How to flash a GSI on Oneplus 10 PRO/T
MAKE A BACKUP THIS WILL WIPE ALL YOUR DATA! Check your warrenty> IF YOU BRICK IS YOUR OWN RESPONSIBILIT! What does not work? Fingerprint face unlock native camera app(Use gcam) no notification slider no modular refresh rate no auto...
forum.xda-developers.com
and this is where I CRUSHED down by running this:
The rootingget you latest magisk here
Install it on your phone
transfer the boot.img you extracted to your phone
open magisk and install it on the boot.img
the patched boot img will be in the download folder move it to your pc
open the fastboot tools folder and open a terminal
adb reboot bootloader fastboot flash boot magisk_patched.img
when your booted open magisk and direct install magisk.
than just reboot
Modules you'll need
BootloopSaver
safetynet-fix
Shamiko
and enable zygisk in the magisk settings.
THANK YOU FOR YOUR HELP !!!
Click to expand...
Click to collapse
Savio Dantes said:
This should work for you
Note: You are already in FastbootD (Recovery).
Follow the steps on this site to Flash A stock ROM above using the Fastboot Enhance Tool
https://www.droidwin.com/flash-stoc...-brick/#STEP_1_Download_Fastboot_Enhance_Tool
Feel free to download Fastboot Enhance Tool.zip (backup location)
Click to expand...
Click to collapse
Thank you Savio, but this is my main issue, I cannot enter fastbootD.
Whether using the tool "fastboot enhance" or using the command line. I cannot reach FastboodD.
When I try to reach this using the tool, it's looping with no error log.
And when I try from CMS:
C:\Users\me\Downloads\from dumper> fastboot reboot fastboot
Rebooting into fastboot OKAY [ 0.000s]
< waiting for any device >
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
It also still sounds like your recovery.img and/r boot.img still may be corrupted.
this needs to MATCH in BOTH slots A & B
Try this:
https://forum.xda-developers.com/t/...e-rom-root-and-recovery.4525451/post-87806713
Also, fastboot reboot fastboot
is only telling your device to reboot BACK into fast boot
This list should help you navigate things a bit better:
-- Find & Validate Device Post Startup--
adb devices
-- Reboot Device to Fastboot mode (Bootloader) --
adb reboot bootloader
-- Root device with Magisk patched boot image --
fastboot flash boot magisk_patched.img
-- Reboot to system --
fastboot reboot
-- Flash Recovery --
fastboot flash recovery twrp.img
-- Reboot to system --
fastboot reboot
-- Boot to Recovery | FastbootD from ADB--
adb reboot recovery
-- Boot to Recovery | FastbootD from FASTBOOT--
fastboot reboot recovery
yedashare said:
and this is where I CRUSHED down by running this:
The rootingget you latest magisk here
Install it on your phone
transfer the boot.img you extracted to your phone
open magisk and install it on the boot.img
the patched boot img will be in the download folder move it to your pc
open the fastboot tools folder and open a terminal
adb reboot bootloader fastboot flash boot magisk_patched.img
when your booted open magisk and direct install magisk.
than just reboot
Click to expand...
Click to collapse
This is where your fatal mistake was.... the red line above is incorrect !
It should have been, "adb reboot bootloader" THEN "fastboot boot magisk_patched.img"
you never want to straight FLASH any modified boot image when working with an a/b partition device.. or pretty much ANY device running the dynamic partition scheme. This is because of the way the partitions are laid out. Something about flashing a modified boot.img directly breaks things... BUT you had a DOUBLE FLAW in yours because you not only flashed a modified boot img directly, you ALSO flashed "magisk_patched.img" to android, which does not have a file named "magisk_patched.img" in its manifest.... android has "boot.img" in its manifest. Understand?? I have seen this flaw ALL OVER the place and no one seems to notice that, so im hoping several ppl finally realize the MAJOR error that they are making.
The android manifest has the EXACT names of every file to be loaded into the system, and any deviations to that list must be incorporated into the BUILD structure when making the os. In other words, say you wanted to build a custom flavor of android from scratch, and have the recovery be installed as a homemade "TWRP" build. Now im talking about FULL BUILD not a port, or remake of an already built OS... I am meaning "1st install... everything from the ground, up.... similar to what lineage does" ... THAT is where the origin android manifest is built... and all updates/custom mods/roms that are made from the original that you created, MUST FOLLOW the exact same file structure, and naming scheme that is in your original manifest. recovery.img needs to be named recovery.img .... system.img needs to be named system.img .... in the case of most of these boot loop issues (BUT NOT ALL) alot of ppl either find some guide written by a person who has never rooted a device in their life, but felt inclined to serve up some untested set of steps that had a fatal flaw they overlooked. THAT is what happened here.
Whoever wrote those steps obviously never tried them before writing them, or they would have had the same result as you. You CANNOT have a completely different named boot image FLASHED to the boot partition! Those steps are instructing you to FLASH, "magisk_patched.img" to the boot partition, where android is expecting "boot.img" ... if those steps were at all to be taken to be the real intention of the author then he would have needed to add a line prior instructing the reader to "rename the file from "magisk_patched.img" and make it "boot.img" ... then in the next step it would have been "fastboot flash boot boot.img" ... but i still DO NOT recommend that, as like i said it can cause errors. If at all possible you always want to BOOT the patched boot.img file 1st, because if there is any problems with it or android rejects it, all you have to do is restart the phone, and it will boot back up to the UNMODIFIED boot.img ! ... but if you FLASH it, then it has no old boot.img to revert to... thus the boot loop..... (bad boot.img ..... reset ..... bad boot.img ..... reset ... bad boot.img ..... reset...) <-Bootloop.
When you BOOT the patched image, though and it loads into the OS with no problems, then you have confirmation that the file was patched properly and is compatible with your OS. NOW you can simply open the Magisk app, and it will see your phone as already rooted, so you can then tap the install button, and then MAGISK will install itself correctly to the right partition, AND make a backup of the file that is from your stock os.
hope that sheds some light and also more ppl take time to read this! Ill make a regular post about it shortly for more visibility.
cheers
u can try to fix sms mms problem using this thread
xiaomi 12/moto edge x30(or any device with sm8450) sms＆ims error · Issue #2246 · phhusson/treble_experimentations
Now gsi is able to boot on devices with sm8450.But sms doesn't work.And ims settings shows "not supported" .I tried to install q-ims.apk or ims.apk from the stock rom.Still ,ims does work at all. A...
github.com
@yedashare
@dladz maybe we can share it groups ?
beatbreakee said:
This is where your fatal mistake was.... the red line above is incorrect !
It should have been, "adb reboot bootloader" THEN "fastboot boot magisk_patched.img"
you never want to straight FLASH any modified boot image when working with an a/b partition device.. or pretty much ANY device running the dynamic partition scheme. This is because of the way the partitions are laid out. Something about flashing a modified boot.img directly breaks things... BUT you had a DOUBLE FLAW in yours because you not only flashed a modified boot img directly, you ALSO flashed "magisk_patched.img" to android, which does not have a file named "magisk_patched.img" in its manifest.... android has "boot.img" in its manifest. Understand?? I have seen this flaw ALL OVER the place and no one seems to notice that, so im hoping several ppl finally realize the MAJOR error that they are making.
The android manifest has the EXACT names of every file to be loaded into the system, and any deviations to that list must be incorporated into the BUILD structure when making the os. In other words, say you wanted to build a custom flavor of android from scratch, and have the recovery be installed as a homemade "TWRP" build. Now im talking about FULL BUILD not a port, or remake of an already built OS... I am meaning "1st install... everything from the ground, up.... similar to what lineage does" ... THAT is where the origin android manifest is built... and all updates/custom mods/roms that are made from the original that you created, MUST FOLLOW the exact same file structure, and naming scheme that is in your original manifest. recovery.img needs to be named recovery.img .... system.img needs to be named system.img .... in the case of most of these boot loop issues (BUT NOT ALL) alot of ppl either find some guide written by a person who has never rooted a device in their life, but felt inclined to serve up some untested set of steps that had a fatal flaw they overlooked. THAT is what happened here.
Whoever wrote those steps obviously never tried them before writing them, or they would have had the same result as you. You CANNOT have a completely different named boot image FLASHED to the boot partition! Those steps are instructing you to FLASH, "magisk_patched.img" to the boot partition, where android is expecting "boot.img" ... if those steps were at all to be taken to be the real intention of the author then he would have needed to add a line prior instructing the reader to "rename the file from "magisk_patched.img" and make it "boot.img" ... then in the next step it would have been "fastboot flash boot boot.img" ... but i still DO NOT recommend that, as like i said it can cause errors. If at all possible you always want to BOOT the patched boot.img file 1st, because if there is any problems with it or android rejects it, all you have to do is restart the phone, and it will boot back up to the UNMODIFIED boot.img ! ... but if you FLASH it, then it has no old boot.img to revert to... thus the boot loop..... (bad boot.img ..... reset ..... bad boot.img ..... reset ... bad boot.img ..... reset...) <-Bootloop.
When you BOOT the patched image, though and it loads into the OS with no problems, then you have confirmation that the file was patched properly and is compatible with your OS. NOW you can simply open the Magisk app, and it will see your phone as already rooted, so you can then tap the install button, and then MAGISK will install itself correctly to the right partition, AND make a backup of the file that is from your stock os.
hope that sheds some light and also more ppl take time to read this! Ill make a regular post about it shortly for more visibility.
cheers
Click to expand...
Click to collapse
Thank you, BB, for the clear explanations about respecting the structure of the partitions and not messing directly with the boot partition using a modified img.
Do I need to reach the conclusion that my phone is broken forever and there is nothing I can do to fix it?
I thought that as long as I reach the recovery mode, I can still fix it.
If you have a brilliant solution just as brilliant as your teaching, could you please help me restoring my phone to a functional state?
And BTW, it was a TRIPLE FLAW, because I had a wonderful lineageos 19 working like a charm with GAPS and I just wanted to root it for no reason.
Many thanks for your efforts.
Damn. Nice to know Lineage works well on this phone with extensive tweaking. GSI's can be pretty unstable from what I've seen, missing cell reception and the like.
Yeah, flashing that image killed the phone. I've seen some people recover by flipping their boot slot to the other one and forcing the phone to boot the stock boot there. But if you've flashed to both slots, you're most likely SOL and need a MSM flash. In which case, you could try flashing the complete stock boot image for your OOS version you were on before moving to GSI to both slots as sort of a last resort, but even then I've only seen minimal success.
Savio Dantes said:
Also, fastboot reboot fastboot
is only telling your device to reboot BACK into fast boot
This list should help you navigate things a bit better:
-- Find & Validate Device Post Startup--
adb devices
-- Reboot Device to Fastboot mode (Bootloader) --
adb reboot bootloader
-- Root device with Magisk patched boot image --
fastboot flash boot magisk_patched.img
-- Reboot to system --
fastboot reboot
-- Flash Recovery --
fastboot flash recovery twrp.img
-- Reboot to system --
fastboot reboot
-- Boot to Recovery | FastbootD from ADB--
adb reboot recovery
-- Boot to Recovery | FastbootD from FASTBOOT--
fastboot reboot recovery
Click to expand...
Click to collapse
I appreciate your help a lot.
I tried all the commands you showed, but I keep going back to this error:
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
I guess it is like a computer. The BIOS move to the Master Boot Record and it moves to the operating system.
It my case, the boot record or boot loader is broken.
Someone suggested to use
Savio Dantes said:
Also, fastboot reboot fastboot
is only telling your device to reboot BACK into fast boot
This list should help you navigate things a bit better:
-- Find & Validate Device Post Startup--
adb devices
-- Reboot Device to Fastboot mode (Bootloader) --
adb reboot bootloader
-- Root device with Magisk patched boot image --
fastboot flash boot magisk_patched.img
-- Reboot to system --
fastboot reboot
-- Flash Recovery --
fastboot flash recovery twrp.img
-- Reboot to system --
fastboot reboot
-- Boot to Recovery | FastbootD from ADB--
adb reboot recovery
-- Boot to Recovery | FastbootD from FASTBOOT--
fastboot reboot recovery
Click to expand...
Click to collapse
I appreciate your help a lot.
I tried all the commands you showed, but I keep going back to this error:
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
I guess it is like a computer. The BIOS move to the Master Boot Record and it moves to the operating system.
It my case, the boot record or boot loader is broken.
Someone suggested to use MSM.
I understand that MSM is no longer available.
Any other direction how I can just fix the booting process?
And this is another error I received which gets closer to the source of the problem:
FAILED (remote: 'Failed to load/authenticate boot image: Bad Buffer
I’m assuming Adb does not work?
why don't we get boot_debug and vendor_boot_debug images to debug and then boot into fastbootd and flash it again, why waste time researching these unrelated things.
Arealhooman said:
I’m assuming Adb does not work?
Click to expand...
Click to collapse
Yes right, adb doesn't work, only fastboot is still alive
TuLy2702 said:
why don't we get boot_debug and vendor_boot_debug images to debug and then boot into fastbootd and flash it again, why waste time researching these unrelated things.
Click to expand...
Click to collapse
Thanks for taking time to answer.
Could you be more specific?
I SAVED MY PHONE
BACK ONLINE
THANKS TO THIS POST:
[TOOL] Oppo/Realme Flash .OFP File on Bootloader
A tool to flash .ofp files in bootloader mode without needing MSM Tool, an alternative to official realme tool. THE DEVICE MUST HAVE THE BOOTLOADER UNLOCKED Features soft unbrick install stock firmware switch device region Credits...
forum.xda-developers.com
WHICH BROUGHT ME BACK TO FASTBOOTD
AND FROM THERE I USED FASTBOOT ENHANCED AND FLASHED PAYLOAD.BIN
AND MY PHONE IS BACK EXACTLY AS IT WAS WHEN I PURCHASED IT
YES!!!!!!!!!!!!!!!!!
One of the reasons why I decided to wipe this stupid oxygen os is because they limited my notifications to 5 seconds WTF ?!!
I didn't mention that I have previously bricked my first OnePlus 10 pro completely, so much so that I received a new one from the provider.
I flashed it successfully using Lineageos 19 and brickED it again trying to root it.
Now, I'll be looking for a solution to remove this stupid f%#$%# limit for Whatsapp notification. Any suggestion?
And I'll wait for an advanced modified ROM for OnePlus 10 PRO.
That's true that it worked very well using Lineageos 19, but text/sms didn't work and I saw that ROAMING was greyed out, so I cannot say if it works or not.
A BIG THANK TO ANYBODY WHO TRIED TO HELP ME.
BOTTOM LINE, ALWAYS HELP YOURSELF FIRST AND NEVER GIVE UP.
I spent over 100 hours on this phone, and here I am back from scratch, but at least with a WORKING PHONE.
yedashare said:
I SAVED MY PHONE
BACK ONLINE
THANKS TO THIS POST:
[TOOL] Oppo/Realme Flash .OFP File on Bootloader
A tool to flash .ofp files in bootloader mode without needing MSM Tool, an alternative to official realme tool. THE DEVICE MUST HAVE THE BOOTLOADER UNLOCKED Features soft unbrick install stock firmware switch device region Credits...
forum.xda-developers.com
WHICH BROUGHT ME BACK TO FASTBOOTD
AND FROM THERE I USED FASTBOOT ENHANCED AND FLASHED PAYLOAD.BIN
AND MY PHONE IS BACK EXACTLY AS IT WAS WHEN I PURCHASED IT
YES!!!!!!!!!!!!!!!!!
One of the reasons why I decided to wipe this stupid oxygen os is because they limited my notifications to 5 seconds WTF ?!!
I didn't mention that I have previously bricked my first OnePlus 10 pro completely, so much so that I received a new one from the provider.
I flashed it successfully using Lineageos 19 and brickED it again trying to root it.
Now, I'll be looking for a solution to remove this stupid f%#$%# limit for Whatsapp notification. Any suggestion?
And I'll wait for an advanced modified ROM for OnePlus 10 PRO.
That's true that it worked very well using Lineageos 19, but text/sms didn't work and I saw that ROAMING was greyed out, so I cannot say if it works or not.
A BIG THANK TO ANYBODY WHO TRIED TO HELP ME.
BOTTOM LINE, ALWAYS HELP YOURSELF FIRST AND NEVER GIVE UP.
I spent over 100 hours on this phone, and here I am back from scratch, but at least with a WORKING PHONE.
Click to expand...
Click to collapse
THIS WAS TOO GOOD TO BE TRUE !
After I thought everything was back, I noticed that the battery stopped charging.
I flashed again Lineageos and it worked but yet the battery didn't charge.
I re run the python script but this time using another OFP and it showed successful.
And yet it successfully killed my phone. Completely dead for the second time.
Hundreds of $ and of hours for a F^&& phone.
Huge lesson to learn here about choices.
EoS
yedashare said:
THIS WAS TOO GOOD TO BE TRUE !
After I thought everything was back, I noticed that the battery stopped charging.
I flashed again Lineageos and it worked but yet the battery didn't charge.
I re run the python script but this time using another OFP and it showed successful.
And yet it successfully killed my phone. Completely dead for the second time.
Hundreds of $ and of hours for a F^&& phone.
Huge lesson to learn here about choices.
EoS
Click to expand...
Click to collapse
you make me laugh
yedashare said:
EoS
Click to expand...
Click to collapse
Damn. I think what happened is you lost your persist.img when initially flashing the first ofp, that thing controls low level stuff like fingerprint unlock and charger cable auth I've seen on these forums. I'm not sure there's a way to get it back either outside of a MSM Flash, certainly haven't seen one here.
Prant said:
Damn. I think what happened is you lost your persist.img when initially flaahing the first ofp, that thing controls low level stuff like fingerprint unlock and charger cable auth I've seen on these forums. I'm not sure there's a way to get it back either outside of a MSM Flash, certainly haven't seen one here.
Click to expand...
Click to collapse
It's okay to spend a little money. It's very risky to do it yourself
Did you managed to get fingerprint working on gsi ?