Hey guys,
i made a test build from lineageos 17.0 for prague.
if you want to test and give some log to me download https://androidfilehost.com/?fid=4349826312261611324 this build
backup your current rom including /vendor partition.
then wipe /system, /data and /vendor partition.
flash my Rom and then if it's not boot please send me sys/fs/pstore/console-ramoops
my source: https://github.com/feroxx
Bootloop on p10 lite , no possibility for logs even under sys/fs/pstore.
Sorry but it seems many files are missed in vendor of this build.
Hami_Do said:
Bootloop on p10 lite , no possibility for logs even under sys/fs/pstore.
Sorry but it seems many files are missed in vendor of this build.
Click to expand...
Click to collapse
Which files are missing in vendor?
feroxxx said:
Which files are missing in vendor?
Click to expand...
Click to collapse
Compared to stock vendor many folders are missing :
vendor/etc/Bluetooth/
vendor/etc/camera/
vendor/etc/cellular_cloud/
vendor/etc/dhcpcd/
vendor/etc/gnss/
vendor/etc/ikedconfig/
vendor/etc/modemConfig/
vendor/etc/xml/
vendor/usr/
vendor/phone.prop
Maybe others
-------------------+
And about your build :
compatibility_matrix.xml & manifest.xml which are in separate zip don't install correctly in system nor in vendor
--------------------+
That was just an opinion
Best regards
Hami_Do said:
Compared to stock vendor many folders are missing :
vendor/etc/Bluetooth/
vendor/etc/camera/
vendor/etc/cellular_cloud/
vendor/etc/dhcpcd/
vendor/etc/gnss/
vendor/etc/ikedconfig/
vendor/etc/modemConfig/
vendor/etc/xml/
vendor/usr/
vendor/phone.prop
Maybe others
-------------------+
And about your build :
compatibility_matrix.xml & manifest.xml which are in separate zip don't install correctly in system nor in vendor
--------------------+
That was just an opinion
Best regards
Click to expand...
Click to collapse
Actually i want to see lineageos 17.0 boots on prague. After successful boot i can fix issues. i will edit rootdir folder a bit for booting. thanks a lot
https://androidfilehost.com/?fid=4349826312261612961
i made a new build. you can test now
feroxxx said:
https://androidfilehost.com/?fid=4349826312261612961
i made a new build. you can test now
Click to expand...
Click to collapse
Bootloop , no logs
Except this grabbed from splah2 :
https://androidfilehost.com/?fid=4349826312261620338
made a new build
feroxxx said:
https://androidfilehost.com/?fid=4349826312261620338
made a new build
Click to expand...
Click to collapse
Unfortunately another bootloop and same result with stock kernel/ramdisk.
feroxxx said:
made a new build
Click to expand...
Click to collapse
Im sorry to intrude, i cant install OS .zip files on my pralx-1, i seem to only be able to install .img files from adb fastboot (on stock ROM and bootloader) and then install twrp. Otherwise it always gives me bootloop. So i cant be of any help but wanted to thank you for taking your time and to bring lineage back to this model. I've sucessfully installed pphhusson Android 10 gsi trebble available on github (cant post links because of post count) maybe you can take a look and see if he is doing something different in order to avoid bootloop. Theres also a havoc 3.0 release from developerluke (though i havent tested that one). I wish you all the luck and once again thank you for your work, cheers
Do we need updated GPU drivers for fixing graphical glitchs? I read that its common problem with Android 10.
I haven't tried booting Android 10 GSI on P8 lite 2017.
there's an unofficial lineage 17 from Andy Yan in case anyone wants to take a look at it
Code:
https://sourceforge.net/projects/andyyan-gsi/files/lineage-17.0/
I've tried it and it boots just fine but ended up going back to un official havoc 3.0 from developer Luke just because i prefer the added customizations it has
i made a new build
https://androidfilehost.com/?fid=4349826312261647300
can anyone test my rom?
For flashing a treble build, what flavour for our P8 lite 2017 ? Tryed GSI type A arm64 but bootloop (for LOS17 by Andy Yan)
Related
This is the official TWRP v3.1.0 build for Kirin-620 devices.
Download it and put it on your SD/ Internal space and flash recovery from your current TWRP or copy it to your pc and flash it with fastboot. Both ways work.
https://dl.twrp.me/cherry/
The newest Version 3.1.0 released a few days ago and our device and other cherry devices are already supported. It has some new functions like adb backup.
Most changes are for HTC and Nougat devices and not worth mentioning here.
Edit: thanks to Bi-Turbo. He updated the recovery and changed the device id to our device. That means you can now flash roms for our phone without problems.
Here is his new Link
I can confirm that the recovery is for kirin version of cherry devices. Works great on ALE-L21
Vika__ said:
I can confirm that the recovery is for kirin version of cherry devices. Works great on ALE-L21
Click to expand...
Click to collapse
What's cherry devices?
amageek said:
What's cherry devices?
Click to expand...
Click to collapse
honor 4X (cherry2)
Cool!
Vika__ said:
I can confirm that the recovery is for kirin version of cherry devices. Works great on ALE-L21
Click to expand...
Click to collapse
This recovery works for my ALE-L21 too !
gothsk8er said:
This recovery works for my ALE-L21 too !
Click to expand...
Click to collapse
Yup
gothsk8er said:
This recovery works for my ALE-L21 too !
Click to expand...
Click to collapse
Yep. Works
Sent from my ALE-L21 using XDA-Developers Legacy app
Works even on flashing roms?
The last version had some trouble with it, I remember I flashed it and then i was not able to flash any rom nor zip because it was a 'cherry' device so I had to return to the old twrp.
Well, this recovery is for cherry so i think same problems will be here too
Firicel69 said:
Works even on flashing roms?
The last version had some trouble with it, I remember I flashed it and then i was not able to flash any rom nor zip because it was a 'cherry' device so I had to return to the old twrp.
Click to expand...
Click to collapse
You can easily fix it by editing the updater-script of the ROM. This version is preferred because it is faster, newer, better and it has more functionality. It can even backup some partitions that the other TWRP can't backup. I would recommend you to use this recovery and just fix the update script.
Or he can just decompile the recovery, edit the default.Prop and edit the cherry names with P8 Lite names, then compile again and you are good
Enviado desde mi 6045B mediante Tapatalk
Oh, nice. Hm, should I flash this? Without stable custom roms not needed. Other Stock ROM can be flashed with fastboot, kernel, too. But it would be useful for rooting the phone. But, do I need this?
Hi. Just I ported TWRP from Honor 4X (cherry) to P8 Lite. Tomorrow I will give a link to download.
Bi-Turbo said:
Hi. Just I ported TWRP from Honor 4X (cherry) to P8 Lite. Tomorrow I will give a link to download.
Click to expand...
Click to collapse
Be sure to send the link so I can update this post. Thanks a lot for your work. I didn't had the time to do it.
As promised, I share link to download recovery TWRP 3.1.0-0 for P8 Lite ported by me.
Link: mediafire.com/?xn663efo2fl63ub
Changes:
- Removed mounting USB OTG (not supported by device),
- Changed kernel and ramdisk from P8 Lite,
- Changed the name of device to ALE-L21 and codename to alice.
Good luck.
Hm, stable enough? Never change a running system And TWRP 3.0.2 works well. Normally good enough for me. Maybe for Android 7 we need the new one?
According to me it is stable. I updated from TWRP 3.0.2 to 3.1.0 and it works very well.
Bi-Turbo said:
As promised, I share link to download recovery TWRP 3.1.0-0 for P8 Lite ported by me.
Link: mediafire.com/?xn663efo2fl63ub
Changes:
- Removed mounting USB OTG (not supported by device),
- Changed kernel and ramdisk from P8 Lite,
- Changed the name of device to ALE-L21 and codename to alice.
Good luck.
Click to expand...
Click to collapse
Works fine, thanks :good:
If someone is interested in the flashable zip from Recovery and eRecovery...
What is the difference between the two? I have installed the first recovery and worked amazing. Can't see much changes, but no bugs so far. Don't have test flashing a rom with it, so we will see Normally it should work everything.
THIS IS NOT MY WORK , this is only for sharing purpose and to provide device specific guide.
ALL Rights goes to erfanoabdi, he is the real developer of this.https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
this ROM is ported from Android P-DP of Google Pixel XL (marlin) thanks to project treble
For review and installation video guide click here:
https://youtu.be/eV6W-t1QKp8
Requirements :
Qcom fully treblized device with 8.1 vendor
Redwolf recovery treble supported
Bugs Fixing :
important: mount vendor and system before flashing these files.
VoLTE fix(zip file):https://drive.google.com/open?id=14d5JJXMdJF6Gif0fWCwfSTAOIQjWrJt8
fingerprint fix(zip file) :https://drive.google.com/open?id=12ddmzZqCcLsdfYYQt21aLcrWPwLYsC5F
(on first boot after flashing fingerprint fix phone freezes, just reboot it again by pressing power button for 10 sec.)
wifi+bt fix:https://drive.google.com/open?id=1kpqAmquZuuliT97v7rnKm-2gE59x6Xv-
camera fix :https://drive.google.com/open?id=1eqJJhqm7z0_-vZbuMmmAXx8o9-6VPqxd
REMAINING BUGS:
WIFI and bluetooth cannot open at the same time.
Instructions : (you can also check video guide provided above)
1. download the latest 8.1 RR luis rom(treble).
2. Download latest andriod p gsi.img PR1 (A only) (this is a zip file you have to extract it to get .img file)
3. Download all the POST-sGSI(1,2,3) zips ,also download gsm.apk.
4. Reboot to recovery
5. flash RR luis rom 6.1 and wipe caches and data and reboot the rom.
6. now reboot in recovery mode.
7. click on install-- install image and select PsGSI.img (don't reboot)
8. Now Mount vendor in recovery
9. Flash POST-sGSI zips from 1 to 3 in priority
10. Reboot
On first boot your phone will give errors and it will be very laggy,,, do not panic.
install downloaded gsm.apk . it will fix errors and your rom will be super smooth.
DOWNLOADS:
RR luis rom v6.1(treble):http://luis-builds.de/downloads/lineageos/rr/Xiaomi_Redmi_4X_(santoni)/
Andriod p and post sGSI zips , incall.zip (total 4 files): https://androidfilehost.com/?w=files&flid=275999
(NOTE: downloaded pgsi img is a zip file you have to extract it to get .img file)
GSMCore apk :https://tinyurl.com/gmscore
good. guess we will see android P roms on our device after its officially released in a few months time.
No need to flash incall fix on our device
Can we disable the navbar?
Hi
Can we imagine some "P" custom roms we could flash directly, like other oreo/nougat roms ?
Flashing these system.img and other post gsi zips wont work on any other treble enabled rom ?
Angharad said:
Can we disable the navbar?
Click to expand...
Click to collapse
Yes, by adding line in buildprop
qemu.hw.mainkeys=1
---------- Post added at 03:39 AM ---------- Previous post was at 03:38 AM ----------
stevenlopes92 said:
Flashing these system.img and other post gsi zips wont work on any other treble enabled rom ?
Click to expand...
Click to collapse
What do you mean? I'm currently on this rom. This rom is great
---------- Post added at 03:41 AM ---------- Previous post was at 03:39 AM ----------
newbie_or_not_newbie said:
Hi
Can we imagine some "P" custom roms we could flash directly, like other oreo/nougat roms ?
Click to expand...
Click to collapse
Maybe u have to wait longer. Are you not familiat with treble?
its quite good rom for daily use if you will manage without VOLTE. Battery backup is decent and rom works as sooth as butter.
What do you mean? I'm currently on this rom. This rom is great
---------- Post added at 03:41 AM ---------- Previous post was at 03:39 AM ----------
Maybe u have to wait longer. Are you not familiat with treble?
Click to expand...
Click to collapse
Not so much... I see what it is, but can't realize what consequences for santoni, for custom roms.
newbie_or_not_newbie said:
Not so much... I see what it is, but can't realize what consequences for santoni, for custom roms.
Click to expand...
Click to collapse
If im correct, it means our devs have just to work on /vendor so we can flash gsi of ROMs that aren't built specific for santoni. Also updating hardware related things are completely independent of Rom Updates.
I understand more now, how difficult it is for devs.
Thanks for explanations.
Hey all i was saying is that now i am using treble enabled lineage os 15.1
Can i flash the system.img and other post gsi-zips above my base of lineage os , or is it mandatory to flash RR luis rom ?
stevenlopes92 said:
Hey all i was saying is that now i am using treble enabled lineage os 15.1
Can i flash the system.img and other post gsi-zips above my base of lineage os , or is it mandatory to flash RR luis rom ?
Click to expand...
Click to collapse
i got bootloops on my phone with lineage os15.1 vendor.
luis rom vendor works well with p gsi img.
i am using Los treble by swapnil bro, as base rom..
its working fine.. no issues at all..
dont neglect to keep Playstore apk ready after you boot, else it would be nuisance
Hi
the only problem that i have is that when i start Bluetooth, the wifi gets disabled and cannot stat until i stop BT
nandakis4 said:
i am using Los treble by swapnil bro, as base rom..
its working fine.. no issues at all..
dont neglect to keep Playstore apk ready after you boot, else it would be nuisance
Click to expand...
Click to collapse
Any calling problem bro?
anyone using as a daily driver?
MarcosJungbluth said:
anyone using as a daily driver?
Click to expand...
Click to collapse
Yup stable enough, some small bugs are there like cannot turn Bluetooth and WiFi on at the same time and YouTube seems to stutter.
Other than that everything works fine. Does heat up a little bit though.
I'm just trying DP4 and flashed all 3 zips after the GSI but the device doesn't sleep. Anyone else?
BT and WiFi at the same time isn't.possible, it seems.
meltbanana said:
I'm just trying DP4 and flashed all 3 zips after the GSI but the device doesn't sleep. Anyone else?
BT and WiFi at the same time isn't.possible, it seems.
Click to expand...
Click to collapse
disable ambient dispaly.
Hello fellow Redmi S2 community
We finally have some custom rom/ Project Treble roms available to use
Please NOTE: Most are unstable as daily drivers as we still don't have developer support for our little device
Disclaimer
You know the drill, I'm not responsible for what happens to your device
good luck!
Let's begin!
I have been testing different project treble roms AND the Miui base roms (ranging from stable Miui9 - 10 and beta's) to find the most 'stable' daily driver
The best combination to date is using the Sep 11th MIUI 10 global stable with Resurrection Remix.
However if you do want to experiment, I highly recommend doing so as the Project Treble roms are updating constantly.
I will leave links to recommended ARM - A roms below and the recommended MIUI 10 base roms to flash over.
What you need:
Miui Base rom both Fastboot & Recovery (I recommend MIUI 10 stable)
Project Treble GSI (gemeric system.img)
Fastboot installed on your PC - there are plenty of tutorials, use google
GAPPS (please note I have had a lot of difficulties installing gapps and HIGHLY recommend you download a rom with gapps go pre-installed. You can use apps like LINK2SD to delete the Go-version and install the fulll version later)
A little bit of patience and time - first boots can take 5-10minutes
MIUI 10 Roms
https://www.theandroidsoul.com/xiaomi-redmi-s2-update/
[ARM - A] Project Treble Forums
https://forum.xda-developers.com/pr...-device-development/index-one-thread-t3812343
Fastboot for; Windows - Mac - Linux
https://www.lifehacker.com.au/2014/...ll-androids-adb-and-fastboot-tools-on-any-os/
Download links to Roms: Check the forum link above for more ROMS
9
https://sourceforge.net/projects/havoc-os/files/
8.1.0
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
https://androidfilehost.com/?w=files&flid=271118
https://androidfilehost.com/?w=files&flid=278902
https://androidfilehost.com/?fid=746163614322269351
Open GAPPS - I RECOMMEND USING MICRO-NANO-PICO. There are plenty of installation issues
https://opengapps.org/
Known Issues
There are many, let me know and I will compile a list
Brightness scaling
Auto-brightness
Instructions
Backup ALL data & partitions
Boot into TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Flash MiUi stock rom VIA fastboot
When rom flash is complete DO NOT BOOT THE ROM
Reboot into Fastboot
Make sure your GSI or system.img is in your Fastboot folder
Run this command: fastboot flash system the-name-of-your-rom.img
For example: fastboot flash system-180818-arm-aonly-vanilla-nosu.img
Now the ROM has been flashed, you can install TWRP, Magisk and GAPPS or just reboot into your new rom
If I helped you please thank me, it helps a lot enjoy your new project treble roms!
DrDrag0n said:
Hi guys
First of all I am NOT A DEVELOPER!
There are plenty of issues with every AOSP treble build but they can function OKish for daily use.
You can install almost any Project Treble GSI that has support fo devicesr: ARM - A
I recommend using ResurrectionRemix - it has been the most stable for daily use I have experienced so far
https ://sourceforge. net/projects/resurrectionremix-oreo/files/armaonly/
^ ^
-remove the spaces-
You need the system.img (Generic System Image - these are used for project treble roms) to proceed further.
THIS WILL DELETE ALL OF YOUR DATA. MAKE A BACKUP OR SAVE YOUR FILES ELSEWHERE.
and of course I am not responsible for anything that happens to your phone, do this at your own risk and be prepared to face bugs! and use google to find out how to overcome them.
good luck my friends!
Known issues:
You tell me
Instructions :
Download the latest .img build and GApps
Download the latest Miui 10 Beta recovery rom current - MIUI 10 8.8.30
Reboot to TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Advanced wipe- system cache dalvik data
Flash latest stock rom - MIUI 10 8.8.30 beta
Reboot to fastboot
Plug your phone into your computer
copy your downloaded GSI.img to your adb&fastboot folder
Flash via fastboot: fastboot flash system the-name-of-your-rom.img
Reboot into TWRP & install Magisk
- PLEASE NOTE I HAVE HAD PROBLEMS WITH INSTALLING Gapps, PLEASE TRY AND FIND A ROM THAT COMES WITH Gapps. YOU CAN USE L2SD TO DELETE THE GO VERSION AND INSTALL THE FULL VERSIONS FROM PLAY STORE LATER-
Reboot
I am not a developer, this is not my main device but I am here to help solve any problems or try and help find solutions!
If any developer would like to give us support please let me know!
Click to expand...
Click to collapse
have you tried it
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes tried and succeeded! ResurrectionRemix seems to be most stable to date but they update all the time so experiment yourself
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
did u try the 64 bit one?
Is it 64bit or not?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
Is it 64bit? Is it stable to use as a daily driver?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
our system only support 32 bit only... dont try the 64bit... it might bring harm to your device
What about jio volte is it working on it and if yes then how because in minbe it is working
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes, ResurrectionRemix works nicely
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Yes I have tried the 64 bit ROMs,
They do not boot
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
It's kind of stable, it gets better after every GSI update. ResurrectionRemix is the most stable that I have tried
Zaid Sheikh said:
What about jio volte is it working on it and if yes then how because in minbe it is working
Click to expand...
Click to collapse
Use MagiskModule VoEnabler to enable volte
If you try arm64aonly it will stuck at mi logo.
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
I wanna use resurrection remix. Please give me link
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
search on google you will get it
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
Hey man, link is in OP, there are 2 spaces that need to be removed
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
can any1 confirm if volte works or not plz ?
xoloera2x said:
can any1 confirm if volte works or not plz ?
Click to expand...
Click to collapse
It depends what GSI you choose to work, but VOLTE is working on resurrection remix
Updated list of roms
New guide - better experience
Direct download links
Looking forward to seeing more Project Treble roms out there!
Please support rom
Some applications are not supported because they support 64-bit architecture, which refmi s2 cpu can run 64-bit version. However, the developer has only 32-bit in operating system, which causes a lot of problems. One of the major problems is that you can not install a 64 bit application. Please help make this a ROM.
Users of Redmi s2 have asked the developers of Xiaomi's way to make a new ROM that supports 64-bit architecture, but has ignored it and has never talked about it.
Mod Edit : Link Removed.
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Please report bugs if found any.
Click to expand...
Click to collapse
A small amount of token would be appreciated as an encouragement.
Click to expand...
Click to collapse
Please Hit Thanks if you found this useful. It costs nothing.
Click to expand...
Click to collapse
You can buy me a Coffee at my PayPal, if you found this helpful.
Click to expand...
Click to collapse
Ui is laggy
hi, thanks for this rom, installed on A510F successfully.
ui is a little laggy but the rom is usable everyday
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Hi Bunny,
Congratulations for this first version!
You did a great job.
In fact I have not found any triple crashes, any kind of problems with third-party apps, no spontaneous reboot, no jamming and / or blocking.
Obviously there is still work on the front of the optimization, in fact the UI laggy in practically every sector, consumption is as anomalous (even if they are not bad to be the first version) and the recharge has problems of overheating, in addition to do not indicate if it is a fast or slow charge
I hope you will continue to develop and that every month you will update the security patches, and maybe one day you will also grow into making it a LOS Official (as it was for dotOS).
hi
bunny the rom is very good .but only one request
please add indian volte file ..
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Thanks
rusiu559 said:
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Click to expand...
Click to collapse
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
When a new build comes out, can I just flash the new build over the old build without wiping everything? (TLDR= Dirty Flash Update/New Build?)
Installed yesterday on french A510F.
No problem until now except in configuration wizard if I choose to configure via data instead of WiFi.
Thank you!
Can't find a way to root in order to restore my Titanium backups, is there a way that works? (I've tried these zip: SuperSu v2.82, addonsu arm 16.0 unofficial, magisk v18.0)
Great man! All the best hope you make it stable soon
This ROM on A710FD?
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
DF11GB said:
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Click to expand...
Click to collapse
darenhoff said:
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
Click to expand...
Click to collapse
Yes, it can be installed on all a710 devices ,and I'm trying to port it for a7108 and a5108. I can tell you how to install it on a710, but can't give you the zip. Because some files are from GitHub. The partitions of a510 and a710 are totally the same, except a5108 and a7108.
Really looks good idea
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
DF11GB said:
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
Click to expand...
Click to collapse
darenhoff said:
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
Click to expand...
Click to collapse
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
@bunnyy: are you following this
This thread is for A5 devices, so I hope your uploades are for A5 (2016). But somebody saying it can be flashed on A7 (2016).
Is it correct? OR it may brick a7
bunnyy said:
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Click to expand...
Click to collapse
Work ota update ?
DF11GB said:
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
Click to expand...
Click to collapse
You said you installed this on A7 2016 device, does it run smoothly with no problems? Can you share us the step by step procedure? Will it also be installed on my A710Y device?Thanks
deleted
deleted
Reserved #1
Reserved #2
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Stan m said:
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Click to expand...
Click to collapse
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
BigChungus321 said:
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
Click to expand...
Click to collapse
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
BigChungus321 said:
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
Click to expand...
Click to collapse
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Stan m said:
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
Click to expand...
Click to collapse
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
_JaSoN_ said:
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Click to expand...
Click to collapse
Tysm!
Signature spoof is not really a big problem since there's a workaround for microg without signature spoof. Also thank goodness no erofs, I kinda like having system as r/w. OTA not a problem as well, would be cool though for a TG channel as a way to get notified on updates in the meantime. For anx and ntfs, welp I hope it works since I personally prefer stock camera images and use my SD card to restore backups.
I'm definitely going to give this rom a shot when I get bored of my current ROM.
_JaSoN_ said:
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
Click to expand...
Click to collapse
Stan m said:
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Click to expand...
Click to collapse
What about this?
Thank you.
Stan m said:
What about this?
Thank you.
Click to expand...
Click to collapse
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
_JaSoN_ said:
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
Click to expand...
Click to collapse
So that means this build will never be official? Because i think lineage requires stock kernel
Stan m said:
So that means this build will never be official? Because i think lineage requires stock kernel
Click to expand...
Click to collapse
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Aryannn999 said:
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Click to expand...
Click to collapse
so why not use that?
Anyone using this rom want to share their opinion?
Stan m said:
Anyone using this rom want to share their opinion?
Click to expand...
Click to collapse
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Hellera said:
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Click to expand...
Click to collapse
Thanks for the reply! Btw how are you using it since 2 weeks? this was released just 5 days ago
...maybe I was confused because I'm using lineage too on another phone, Oneplus-6T... sorry about this!