it seems to works sporadically. also when i unplug the cable it still does not work. Only when I toogle it to speaker. I erased the bluetooth connection from the car and phone and set it up again and still a no go. bluetooth works on my headphones btw. So not sure what the issue is.
This is most likey because the microphone in your car stereo is unplugged or otherwise not working. If it's a stock stereo take it to the dealer and if it's an aftermarket then check the cable
Sent from my Pixel 4 XL using Tapatalk
superchilpil said:
This is most likey because the microphone in your car stereo is unplugged or otherwise not working. If it's a stock stereo take it to the dealer and if it's an aftermarket then check the cable
Sent from my Pixel 4 XL using Tapatalk
Click to expand...
Click to collapse
yea i thought that but other phones work . Seems to be an android auto thing. I heard once that could be the mic is listening for the hot word while i'm on a call therefore taking control of the mic so idk
Related
I have bluetooth in my SUV (Mopar's uConnect Dodge Nitro 2008), and I am looking into getting a bluetooth device like this (Link or Link) and I was wondering if the hero will connect to both the audio gateway and car kit? I know the iPhone and iPod(3G) will do this so I'm thinking there is hope for the hero.
Does anyone have either of these devices or something similar, any cheap places?
Thanks!!!
I tried this in my 08 G37 since the built in OEM BT does not do A2DP, this was on the original 1.5 ROM using Kensington A2DP adapter with Remote. I could get both to pair and connect but the audio would not work on phone calls once the music was playing. I need to give it a try with the 2.1 software but I am not too optimistic since the 2.1 implementation is buggy as well. I ended up getting a $2 HTC adapter/splitter that connects both audio and charger with one connector. I think you would still have to connect the charger when using BT since it wears the battery down so this is not much different.
This is the adapter I have, the cool thing about this one is that you can stick the remote anywhere in the car.
Kensington LiquidAUX Bluetooth Car Kit with Remote for Music Phones (this is actually a hands free system as well so maybe it was taking over the call audio even with handsfree profile disabled in settings)
I have an Aux jack for my car stereo, so I just run a 3.5mm male-to-male cable for audio. I use my BT for hands-free calling. If I'm using my phone for music, it's plugged in anyway, so one more cable isn't going to hurt anything.
subcypher said:
I have an Aux jack for my car stereo, so I just run a 3.5mm male-to-male cable for audio. I use my BT for hands-free calling. If I'm using my phone for music, it's plugged in anyway, so one more cable isn't going to hurt anything.
Click to expand...
Click to collapse
True... that's what I've been doing
subcypher said:
3.5mm male-to-male cable for audio.
Click to expand...
Click to collapse
3.5mm is icky. how can you stand to listen to that?
thedudejdog said:
3.5mm is icky. how can you stand to listen to that?
Click to expand...
Click to collapse
wtf are you talking about? that's a direct line out from the sound card on the phone? blue-tooth would be the lower quality audio. wire>wireless ALWAYS no if ands or buts. copper is a million times better conductor than air.
ipfreelytech said:
wtf are you talking about? that's a direct line out from the sound card on the phone? blue-tooth would be the lower quality audio. wire>wireless ALWAYS no if ands or buts. copper is a million times better conductor than air.
Click to expand...
Click to collapse
Actually BT audio is digital and 3.5mm is analog. Digital is better than analog any day of the week. Plus with it being digital it doesn't really matter that it is wireless, as long as you are within proper range the transferred 1s & 0s are identical wired or wireless.
Sent from my Hero CDMA using XDA App
RocStar629 said:
Actually BT audio is digital and 3.5mm is analog. Digital is better than analog any day of the week. Plus with it being digital it doesn't really matter that it is wireless, as long as you are within proper range the transferred 1s & 0s are identical wired or wireless.
Sent from my Hero CDMA using XDA App
Click to expand...
Click to collapse
Digital is not always better plus it ends up analog in the end. With A2DP you are adding a second variable encode/decode to the mix, this process in case of already compressed MP3s or streaming audio degrades the original quality a second time. The only reason you would not notice is because of crappy audio equipment or ears
Audio over Bluetooth still does NOT compare to wired.
Read some reviews sometimes. All of the current BT headsets do not come anywhere close to audio transmitted over a wire.
ALL GLORY TO THE HYPNOTOAD
Sent from my HERO200 using XDA App
So what was the verdict on 2 BT devices at once? In my situation I'd be looking at having it connected to my car via Ford's Sync system, as well as a BT OBD-II adapter like this:
www . plxkiwi . com/kiwibluetooth/buynow_torque.html
maxpower47 said:
So what was the verdict on 2 BT devices at once? In my situation I'd be looking at having it connected to my car via Ford's Sync system, as well as a BT OBD-II adapter like this:
www . plxkiwi . com/kiwibluetooth/buynow_torque.html
Click to expand...
Click to collapse
Haha... I'm too chicken to waste money on it. No idea! I have less than a year left with this phone so I'm just going to wait.
I hate making new threads but I can't seem to find an answer. Maybe I'm using the wrong keywords.
I use my N1 in my car alot. It's my main source for my music and hand's free calling while driving. I use the aux jack on my stereo to the N1 for music.
When I get a call it would ring though the speakers and I would touch the slider to accept the call. The caller would hear me crystal clear and I would hear them though the speakers just fine.
Now when I get a call, they can't hear me. They say I sound like I'm far far away. I can hear them just fine. But I look like a madman in my car screaming and yelling just to be heard.
So what I have to do now, is answer the call, and touch speaker, which only plays the voice though the speaker phone. They hear me crystal clear but sound is no longer going to the car speakers.
Anybody have this problem or know what's causing it or even a push in the right direction?
I have this excact same problem.
I came from a milestone using a standard 3.5mm audio jack and calls went really well. But when i tried my nexus, i got the same response, "sounds liek your far away".
I tried a few AUX cables but they all seem to do the same thing. So my solution was a aux cable with a built in mic.
I ended up modding the headphones that came with my nexus to get this working. Removed the earbuds and soldered a 3.5mm jack.
Now when i talk using that cable with a built in mic, ppl hear me very clearly. So i've jsut been using that cable since. I'm sure you can buy a premade aux cable with a mic at any local mobile audio store. I saw one at a BestBuy mobile here.
Hope this helps.
but the issue is that at one point it DID work normal with his nexus. i think what is going on here is the phone originally read the aux input as just standard audio output. but now its reading it differently somehow, i just dont know why. its almost like the difference when a phone thinks you have headset connected vs audio out connected with no mic support. no idea on a solution though...
xiophyte said:
I have this excact same problem.
I came from a milestone using a standard 3.5mm audio jack and calls went really well. But when i tried my nexus, i got the same response, "sounds liek your far away".
I tried a few AUX cables but they all seem to do the same thing. So my solution was a aux cable with a built in mic.
I ended up modding the headphones that came with my nexus to get this working. Removed the earbuds and soldered a 3.5mm jack.
Now when i talk using that cable with a built in mic, ppl hear me very clearly. So i've jsut been using that cable since. I'm sure you can buy a premade aux cable with a mic at any local mobile audio store. I saw one at a BestBuy mobile here.
I was thinking on buying the Belkin one with the mic right at the aux jack.
Hope this helps.
Click to expand...
Click to collapse
RogerPodacter said:
but the issue is that at one point it DID work normal with his nexus. i think what is going on here is the phone originally read the aux input as just standard audio output. but now its reading it differently somehow, i just dont know why. its almost like the difference when a phone thinks you have headset connected vs audio out connected with no mic support. no idea on a solution though...
Click to expand...
Click to collapse
Exactly, it DID work. I can't pin point when it happened for me. I was thinking maybe it was when I went from Eclair to Froyo?
I'm almost positive that using the phone over Aux out broken with the update to Froyo. Has anyone tried this yet with Gingerbread on the N1 or with an NS? I'm hoping they fixed this, it's a really, really frustrating problem.
My fear is that everyone at Google got free car docks so they won't ever fix it because it's never a problem for them.
I also have the exact same problem. Thought it never worked for me, I only recently sets up my car mount with aux. Anybody found a solution?
I picked up a Vivid over the weekend and overall I'm thrilled. The only area that is lacking is BT quality when paired with my car stereo (Pioneer AVIC-Z110 updated to the Z130 firmware). Granted, these units have gotten bad reviews for their BT quality, HOWEVER, my old device worked well. I used to have an HTC "Pure" running Windows Mobile and got no complaints for call quality.
My wife now says that this phone is echoing really badly. I can't hear it on my end, all sounds well. When I disable BT and just call her directly from the handset, all is well.
Are there any tweaks or settings that can be changed in Android and on the Vivid specifically? I read about someone adjusting the "BT gain" before they paired their device, but I can't find such a setting.
Thanks,
-Brett.
+1 on this. My stereo has a Mic volume adjust that helps a little, but it seems to be bad when I'm on the highway. Though I've always had this problem with Android. my old windows 6.5 phones were just fine.
Another Solution
Instead of using BT for music from my phone, I just hit the Sirius/XM button on the sound system, or plug my iPod directly into the sound system. Of course, I had to buy a new vehicle to get this capability.
PS: The Vivid does work well via BT for hands-free phone calls, also built into the new vehicle.
brucegil said:
Instead of using BT for music from my phone, I just hit the Sirius/XM button on the sound system, or plug my iPod directly into the sound system. Of course, I had to buy a new vehicle to get this capability.
PS: The Vivid does work well via BT for hands-free phone calls, also built into the new vehicle.
Click to expand...
Click to collapse
I re-read my first post and realized I might not have been as clear as I could be. I'm speaking strictly about phone call quality, not BT audio streaming. I tried audio streaming once and it sounded OK, but that's not what I'm referring to here.
When talking on the phone using the Pioneer AVIC z110 as a BT headset the person that I'm calling reports a lot of echo on their end, to the point where it's almost unusable. Things sound mostly fine on my end.
So the question stands - are there any (hidden?) settings or adjustments that can be made on the Vivid, or in Android in general?
Thanks,
-Brett.
not to my knowledge, no adjustments. But if you're using your headset, have you used it on other phones without this problem? If there's an echo, it makes me think maybe the phone mic is active while it should be only the BT mic that is. Maybe try covering the phone mic with your thumb or something and ask the person on the other end if that does anything to take away the echo?
Yea I'm getting the same feedback about phone calls. Music quality is great except when I use navigation. My streak would lower music when it would speak instructions. My vivid doesn't.
Reclaim said:
Yea I'm getting the same feedback
Click to expand...
Click to collapse
Pun intended?
radi0chik said:
not to my knowledge, no adjustments. But if you're using your headset, have you used it on other phones without this problem? If there's an echo, it makes me think maybe the phone mic is active while it should be only the BT mic that is. Maybe try covering the phone mic with your thumb or something and ask the person on the other end if that does anything to take away the echo?
Click to expand...
Click to collapse
I used the same BT setup on my old Windows Mobile phone with no complaints.
Maybe you're on to something. I had assumed that the phone would mute its internal microphone when connected to a BT device. Maybe that's not the case? I'll try covering the phone's mic and see if that makes a difference.
Thanks,
-Brett.
No luck. I tried both covering the Mic and taking the phone out of the car entirely. It made no difference in call quality.
Next step is to pair my wife's blackberry to the car and see if that works better. Need to determine if it's the phone or the car.
:: Sent from my HTC Vivid via Tapatalk
radi0chik said:
Pun intended?
Click to expand...
Click to collapse
I'm a real comedian lol
Sent from my HTC PH39100 using XDA App
zzoinks said:
I re-read my first post and realized I might not have been as clear as I could be. I'm speaking strictly about phone call quality, not BT audio streaming. I tried audio streaming once and it sounded OK, but that's not what I'm referring to here.
When talking on the phone using the Pioneer AVIC z110 as a BT headset the person that I'm calling reports a lot of echo on their end, to the point where it's almost unusable. Things sound mostly fine on my end.
So the question stands - are there any (hidden?) settings or adjustments that can be made on the Vivid, or in Android in general?
Thanks,
-Brett.
Click to expand...
Click to collapse
Sorry for being a smart-aleck. Actually, on a hand-free BT call last night I noticed a bit of an echo. I need to make some more calls to see if it continues. I never had that with the HD2 in 15 montrhs of use. Also, I noticed that the phone rings directly as well as through the car's sound system when I recieve a call. Again, I don't remember my HD2 doing that.
Minor update: I've found that it might be related to the Android Bluetooth in call volume setting. It seems like if I lower the volume during a call (via the volume rocker on the phone, not form the car's head unit) it helps with the echo problem. The problem is that this volume level resets itself to the max every time I pair with the car.
Is there any way to force Android to keep a lower volume level for the BT headset? I tried an app called Bluetooth Volume, but it didn't affect the BT Headset volume.
Thanks,
-Brett.
Just wanted to check is anyone else is finding that headphones plugged into this jack often are not picked up by the phone and the speaker is used instead.
Happens both with my car AUX and my in ear Klipsch earphones, although if I jiggle the plug it sometimes works. The bundled headphones (MH750) so not seem to suffer this problem.
Is this a widespread problem or an issue with my handset?
the MH750 has 3 rings on the jack as a opposed to the 2 rings on the connector for your other headphones am I right? Having the extra ring on it (meant for the remote) may be what is adding the extra tightness when inserted. I'm not sure how to solve your AUX problem but you may need to try headphones which have a built in remote like the MH750 so that it has the extra ring on the connector. This may also be a defect, as I can not confirm since my device is still on it's way.
EDIT : After receiving the phone this happened to me once. You have to play around with the smart connect settings o disable it all together. It doesn't seem to be hardware related.
i have the same problem here .
Same problem
What music app are you all using
Sent from my C6903 using xda app-developers app
I used to listen to my songs using the AUX input with my Xperia Z1 in my car radio. But now, (I don't know if this ahve to do with upgrading to .757) it won't play and it says that the headphone isn't compatible. I'm just using a P2-P2 cable plugged in my AUX car's radio input and in my Z1 phone output
That is impossible. That cable have nothing sophisticated to tell to the phone that isn't compatible and the jack have audio out only. I use that system too in my car to listening Unz, Unz, Unz, and nothing strange jet. Somehow you have to get rid of that notification.
eclyptos said:
That is impossible. That cable have nothing sophisticated to tell to the phone that isn't compatible and the jack have audio out only. I use that system too in my car to listening Unz, Unz, Unz, and nothing strange jet. Somehow you have to get rid of that notification.
Click to expand...
Click to collapse
It works with my xperia neo. Also, neo's headset dont worlk with z1, but thats because they have microphone and the ground ring was changed in 2011+ xperia phones...
I can't plug my Z1 into my Makita site radio, it doesn't play anything through the AUX, although the phone seems to think it's got headphones plugged in. Tried a few cables, some newer and some older with no variation in results.
Sent from my C6903 using XDA Premium 4 mobile app
This suck. And it's very weird because it used to work..