Hey everyone,
Today I received the update to version 1.29.111.11 via OTA, but unfortunately it won't install. After rebooting, the update screen with the green arrows is displayed, but only for about 1 second. After that, the red triangle shows up. The message reads:
Code:
Finding update package...
Opening update package...
Installation aborted.
I already tried downloading the update several times, a corrupted file can therefore be eliminated as a cause. I also tried manually installing the update via recovery, but then the error is as follows:
Code:
Mount SDCARD failed 1 times
Mount SDCARD failed 2 times
Mount SDCARD failed 3 times
Mount SDCARD failed 4 times
Mount SDCARD failed 5 times
Can not mount SD Card.(No such file or directory)
-- Invalid operation. --
I am on stock rom (T-Mobile Germany), not rooted and with original bootloader (locked) and original recovery.
Maybe some of you have an idea what might be the problem...
i also get this msg trying to update using update.zip please help.have done reset and format no luck
Hi, I hope some can help me
Here´s my story, the phone is a Galaxy Ace GT-S5830m, that had GingerBread 2x, I wanted to take it to Kit kat 4x, then I downloaded the CWM 6.0.4.6, but, because of my ignorance, I didn't downloaded the KitKat rom file at the same time, I successfully installed the CWM file, but after this the phone won't boot. The only thing it does is:
Enter recovery mode by pressing Volume Up+Home+Power
Show the Samsung logo
But I cannot make it enter download mode, if I hit VolumeDown+Home+Power it just shows the Samsung logo
If I connect it to the PC via USB cable, the PC won't recognize the phone on the USB drivers list. I already downloaded the Samsung USB drivers
When I enter recovery mode I see the four options for
rebbot system now
apply update from sdcard
wipe date/factory reset
wipe cache partition
And below that I see --Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
What can I do? I'm I done? Please help! Thanks!
egomezmx said:
Hi, I hope some can help me
Here´s my story, the phone is a Galaxy Ace GT-S5830m, that had GingerBread 2x, I wanted to take it to Kit kat 4x, then I downloaded the CWM 6.0.4.6, but, because of my ignorance, I didn't downloaded the KitKat rom file at the same time, I successfully installed the CWM file, but after this the phone won't boot. The only thing it does is:
Enter recovery mode by pressing Volume Up+Home+Power
Show the Samsung logo
But I cannot make it enter download mode, if I hit VolumeDown+Home+Power it just shows the Samsung logo
If I connect it to the PC via USB cable, the PC won't recognize the phone on the USB drivers list. I already downloaded the Samsung USB drivers
When I enter recovery mode I see the four options for
rebbot system now
apply update from sdcard
wipe date/factory reset
wipe cache partition
And below that I see --Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
What can I do? I'm I done? Please help! Thanks!
Click to expand...
Click to collapse
Hi
Flash a custom recovery like cwm v5 n then erase all like data sytem etc then download the .zip file that roots ur fone n flash it n then do a wipe data n thn place any custom rom of ur device n flash. . . If dsnt wrk do tl me
Hit Thanks
more questions
Raakib Zargar said:
Hi
Flash a custom recovery like cwm v5 n then erase all like data sytem etc then download the .zip file that roots ur fone n flash it n then do a wipe data n thn place any custom rom of ur device n flash. . . If dsnt wrk do tl me
Hit Thanks
Click to expand...
Click to collapse
Hi Raakib, thanks for taking the time to answer! But how can I put the cwm v5 in the phone if the PC doesn't see the phone? Sorry for the basic questions? I'm new in this things. The first time I did this I pluged the phone to the PC and I was able to see the memory card in the windows explorer so I only did a drag and drop, but that doesn't work any more, please advice, thanks!
just do 1 thing download the recovery file on your pc and then plug your sd card using any sort of card reader and then copy the file to memory card . Then insert the memory card in the phone and go to recovery and flash it. Hit thanks.
---------- Post added at 03:30 AM ---------- Previous post was at 03:28 AM ----------
if u want that your pc should recognize your phone, take it to download mode and see it gets detected in odin or not , if not then swap the drivers maybe upgrade or downgrade.
still no luck
Raakib Zargar said:
just do 1 thing download the recovery file on your pc and then plug your sd card using any sort of card reader and then copy the file to memory card . Then insert the memory card in the phone and go to recovery and flash it. Hit thanks.
---------- Post added at 03:30 AM ---------- Previous post was at 03:28 AM ----------
if u want that your pc should recognize your phone, take it to download mode and see it gets detected in odin or not , if not then swap the drivers maybe upgrade or downgrade.
Click to expand...
Click to collapse
Hi Raakib, just to let you know that I haven't had any luck with this, this is what I have tried, with a memory card reader connect to my PC, because the PC still doesn't see the phone
Using CWM v5.0.2.6 and with that version trying to install the original rom I get this
-- Installing: /sdcard/Downloads/S5830MUMnD1_S5830MTCEND1_TCE.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So my attempt to recover gingerbread was unsuccessful, now, in all honesty I have no idea if I'm using the correct zip file of gingerbread, I mean, I downloaded from the sammobile page and choose the one for my country, but the instructions call for odin and to unzip the fiel, so I don't know if this zip file can just be copied to the SDcard and be unziped with CWM. So CMW needs special rom files different from the ones odin uses?
On my second attempt using CWM 6.0.4.6 to try to install kit kat 4.4 using the instructions from the androidcure website called "How to install Android KitKat on Samsung Galaxy Ace S5830", it mentions that I must use cwm v6 and the rom file called cm-11.0.0-RC4-GT-S5830-cooper-PS.zip I get this
-- Install /sdcard/Downloads ...
Finding update package...
Opening update package...
This package is for "cooper.GT-S5830" devices: this is a "".
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted
If I use cwm v5 to try to mount /system (which is permanently un-mounted) I get this
mount: mounting /dev/block/stl9 on /system failed: Invalid argument
W:failed to mount /dev/block/stl9 (File exists)
W:failed to mount /dev/blockstl9 (no such device)
Error mounting system!
The phone still won't go in download mode and is still not visible by the PC
Any other suggestion? Thanks!!!!
egomezmx said:
Hi Raakib, just to let you know that I haven't had any luck with this, this is what I have tried, with a memory card reader connect to my PC, because the PC still doesn't see the phone
Using CWM v5.0.2.6 and with that version trying to install the original rom I get this
-- Installing: /sdcard/Downloads/S5830MUMnD1_S5830MTCEND1_TCE.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So my attempt to recover gingerbread was unsuccessful, now, in all honesty I have no idea if I'm using the correct zip file of gingerbread, I mean, I downloaded from the sammobile page and choose the one for my country, but the instructions call for odin and to unzip the fiel, so I don't know if this zip file can just be copied to the SDcard and be unziped with CWM. So CMW needs special rom files different from the ones odin uses?
On my second attempt using CWM 6.0.4.6 to try to install kit kat 4.4 using the instructions from the androidcure website called "How to install Android KitKat on Samsung Galaxy Ace S5830", it mentions that I must use cwm v6 and the rom file called cm-11.0.0-RC4-GT-S5830-cooper-PS.zip I get this
-- Install /sdcard/Downloads ...
Finding update package...
Opening update package...
This package is for "cooper.GT-S5830" devices: this is a "".
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted
If I use cwm v5 to try to mount /system (which is permanently un-mounted) I get this
mount: mounting /dev/block/stl9 on /system failed: Invalid argument
W:failed to mount /dev/block/stl9 (File exists)
W:failed to mount /dev/blockstl9 (no such device)
Error mounting system!
The phone still won't go in download mode and is still not visible by the PC
Any other suggestion? Thanks!!!!
Click to expand...
Click to collapse
the stock/original rom wont flash in the recovery. try to flash some other custom rom in CWM 5 and before flahing any rom you need to do a full factory reset and whether in cwm5 or 6 i m nt sure go into advance and wipe efs etc there then flash a rom. If still nothing then contact me i will tell you some great thing +918715031141. (my personal number)
Hello everyone,
My phone is in what it seems to be erecovery loop, I tried flashing images via fastboot extracted from update.app file, didnt work at all.My phone is unlocked, I flashed twrp again and downloaded latest stockrom version for my country(asked a friend about it since he has the same phone), I put those 3 files on my usb and connected it to my phone.Opened it in twrp, when i try to flash update.zip i get Error 9.I tried pretty much anyting i could find on this forum and other sources from google, nothing rly seems to work and there isnt anything at all for error 9.Do u guys by any chanse know what is the problem here?
device: Huawei P10 Lite WAS-LX1C432B194 (latest version for my country, Serbia, Eu)
phone unlocked, twrp installed, can do fastboot commands
This is what i get when trying to flash that update.zip
Code:
Updating partition details...
...done
Full SELinux support is present.
MTP Enabled
Formatting Cache using make_ext4fs...
Wiping data without wiping /data/media ...
Done.
Updating partition details...
...done
Installing zip file '/usbotg/update.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
mountencrypt: failed to mount /data: Success
script succeeded:resut was []
check_write_data_to_partition,write data error
[COLOR="Red"]E:unknown command [errno][/COLOR]
update_huawei_pkg_from_ota_zip: update package from
zip failed
[COLOR="red"]Updater process ended with ERROR: 9
Error installing zip file '/usbotg/update.zip'[/COLOR]
Updating partition details...
...done
There is already a thread for this problem: https://forum.xda-developers.com/mate-7/help/softbricked-device-fix-t3159742/page5
LwannaCM said:
There is already a thread for this problem: https://forum.xda-developers.com/mate-7/help/softbricked-device-fix-t3159742/page5
Click to expand...
Click to collapse
I already firgued it out, but tnx for the response.
I bought sd card(didnt have one), did dload method, since normal one approach didnt work i used force update approach(dload moved to sd card, power off, hold vol+ + vol- + power button and it installed) also i needed to flash stock recovery beforehand(so it removes twrp, used fastboot to do it, phone was unlocked, power off connect to PC via usb cable and hold down vol- right away, then flash it through fastboot), it cant do force update with twrp still installed.Once it was done i normally booted to stock rom, phone was no longer unlocked, now i unlocked it flashed twrp and rooted it, everything works just fine.Hope it helps some1 with the same problem.
source: https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097 , there is guide thing for both normal and force update
Thank for the help. It gives me a clue but I am still struggling as the force update approach get stuck at 5%. Thanks anyway.
How can I fix this issue :crying:
Oh also I noticed that before rebooting there is a message that says: *Stopping adb*
It happened to me also. Just find a micro sd card and get away from this Samsung weirdo things.
I have the same issue
Also When i update from sd card
It says to me:
Footer is wrong
signature verification failed
Error 21
I have flashed the INS firmeware
I have downloaded the update zip file more then 3 times but same result
Hey All, this is a more specific thread related to this other one:
https://www.reddit.com/r/GooglePixel/comments/ufa7o3
My pixel 4a 5g is on the january update and does not find the newer update
https://www.xda-developers.com/how-to-install-android-12/
I tried all the steps here including trying to put the zip file in the adb folder, making a full path for the file, etc, but it always says:
PS C:\adb> adb sideload .\bramble-ota-sp2a.220405.003-080c4046.zip
loading: '.\bramble-ota-sp2a.220405.003-080c4046.zip'
* cannot read '.\bramble-ota-sp2a.220405.003-080c4046.zip' *
I put the zip file on the base directory of my phone and tried mounting system but got:
"E: Couldn't Access State File
Mounted System"
I tried use the "install from sd card" but it couldn't find the sd card volume (obv)
I also tried the pixel repair tool at
But it just gets stuck at " Your phone is connected. The tool is checking your phone's software version."
Does anyone have any suggestions on how to fix this without wiping my data or if I really am stuck, how can I fix this?
SOLVED: So it seemed that my solution was that I needed to uninstall and reinstall the stock adb drivers: https://developer.android.com/studio/releases/platform-tools