Related
May NOT work for 2.3.3, if attempting on 2.3.3 use old part 1! - Will wipe all data though
Windows ONLY!
Hey guys, rooted my Nexus S today, and decided to write a thorough, detailed guide on how I did it, as none of the guides I had found had everything detailed. I came across a few problems, and all of this is in the guide. I successfully completed it on my Nexus S running 2.3.2, so any version below that will also work.
The original guide was made by AllGamer, and can be found here. I followed this guide, and added things when I found it was needed
The full guide with everything (including links, pictures) can be found on my site, Complete Android.
New info: Upon finding another thread over at XDA (http://forum.xda-developers.com/showthread.php?t=931865) it has been realized that you can root your Nexus S without unlocking the bootloader, and therefore not loosing your data on the SD card. Part 1 for the new method is still the same, but choose the new Part 2!
WARNING: Rooting your device will wipe all data off it, so you will loose EVERYTHING! Make sure you backup all important data first. Only applies to old Part 2 (fastboot oem unlock method), but it is still a good idea to backup important information!
Click to expand...
Click to collapse
What you will need:
Nexus S (obviously)
Android 2.3 SDK
USB Cable
PDAnet (for drivers)
Clockwork Recovery Image
Superuser
Part 1
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Once it has finished downloading, unzip it, and run the SDK manager.
Select whatever components you wish to install, but you MUST make sure you install Google USB Driver (Available packages > Third party Add-ons > Google Inc. Add-ons > Google Usb Driver package, revision 4) otherwise this guide will not work!
We must now install the Google USB Driver, or the phone will not be recognised as a device other than a mass storage device.
Connect your Nexus S to your computer, and put it in USB storage mode.
Put it in USB Debugging Mode (Settings > Applications > Development > USB Debugging)
Windows should now recognise your Nexus S when you plug it in, and ask to install drivers. It probably won’t find anything, so we need to help it manually.
(Installing drivers manually varies between Windows versions, so please refer to http://developer.android.com/sdk/win-usb.html if you are having trouble). Launch Device Manager (you can find it in Control Panel), find Other Devices, and listed under that heading, you should find Nexus S. Right click, and select Update Driver Software. Click Browse my computer for driver software, find your SDK folder, then the google-usb_driver folder inside it, click OK, then Next. This should install the USB driver successfully. Reboot your computer.
Power off your Nexus S, connect it to your computer via USB cable, and boot it into the Bootloader Interface (you can do so by holding down the Power and Volume Up buttons at the same time).
It should say LOCK STATE – LOCKED, in white just above the green Android. You are now ready to move on!
Part 2 - Fastboot oem unlock method - WIPES ALL DATA!
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use ‘fastboot oem unlock’ (the rooting command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn’t).
Now in the command prompt, type in (without the quotes) ‘fastboot oem unlock’.
Now turn your attention to the phone, and read through the new information displayed on the screen. Using the Volume keys select Yes, then press the Power button. This will WIPE EVERYTHING! I bear no responsibility for any lost data on your phone!
If everything is successful, on your phone, the LOCK STATE should now read UNLOCKED, and on your computer, the command prompt window should say something like this:
Download the Clockwork Recovery image (here if you don’t already have it) to your Android SDK tools folder (*Android SDK*\tools).
Rename the newly downloaded Clockwork Recovery image to ‘recovery.img’ (no quotes).
Now we need to flash it to our Nexus S, so enter this command into the Command Prompt (make sure it is in the Androis SDK tools folder!) ‘fastboot flash recovery recovery.img’ (without the quotes).
If all is successful, the Command Prompt window should look something like this now:
Download the superuser app to the Android SDK tools folder.
Power on your Nexus S, leaving it connected to USB.
Mount the USB storage, and drag and drop the superuser .zip file you just downloaded into the root of the internal SD card (so Computer > *Device Name*, not in any other folders!). It should look something like this:
Power off the Nexus S, and return to the Bootloader Interface (step 9, part 1).
Select Recovery using the Volume buttons, then the Power button.
The phone should reboot into Clockwork Recovery, but if not don’t panic, just repeat steps 9-12, including downloading a new copy of the file (mine only worked the second time around, don’t worry!)
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot. (You will now also have an unlocked padlock when you boot up)
Done! You now have to set up your phone again like when you first got it, but it will be rooted now.
New Part 2 - Does NOT wipe everything - Keeps a locked bootloader
Make sure Part 1 is completed.
Make sure you have downloaded the Clockwork Recovery file and the Superuser file.
Move the Clockwork Recovery file to your tools folder within the Android SDK folder, and rename it to recovery.img (for simplicity).
Connect your Nexus S via USB to your computer and mount it as USB storage. Copy across the Superuser file to the top level of your sdcard. (So the first window you see, not in any other folders. The sdcard is just where all the files are stored, don't worry about it too much for now).
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don't worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use 'fastboot boot' (the boot image command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) 'cd c:\*YOUR SDK*\tools'.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn't).
We now need to use the 'fastboot boot' command to load Clockwork Recovery onto our Nexus S. In the command prompt, type in the following (but without the quotes, as always) 'fastboot boot recovery.img'
Once you are in Clockwork Recovery (it may take a couple of tries, don't panic, just redownload Clockwork Recovery, and complete steps 3 and 10, part 2) it should look something like this:
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot.
Done! You should still have all your data present on your phone, and have root access!
Notes
As AllGamer said in his tutorial:
It’s normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you’ll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you’ll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Keep this in mind! It's not because you did something wrong
Also, some root apps require BusyBox to be installed, as I found out with Titanium Backup, so once you set up your Nexus S again, head on into the Market, and download BusyBox. It installed fine on my Nexus S this way, and now TB works fine.
I hope this is the best, most thorough guide you will find on rooting the Nexus S. Enjoy! Feedback is appreciated, and I will help out if you need any extra help.
Your guide has been wonderful however I'm stuck on part 2, step 4. I tried writing in the path to my directory and they keep giving me whatever I wrote in the command prompt "is not recognized as an internal or external command, operable program or batch file"
"Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’."
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
STARSCR33M said:
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Click to expand...
Click to collapse
Ok so if you want to change directories in the command prompt, you need to use the command
Code:
cd
So in your case I would type in
Code:
cd c:\Users\Du\Downloads\android-sdk_r09-windows\android-sdk-windows\tools
That way is fool proof, however you could take a shortcut, because you are already in the Users/Du folder (because of how it looks when you first open it), you could just type in
Code:
cd Downloads\android-sdk_r09-windows\android-sdk-windows\tools
Hope that helps
ravidavi said:
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Click to expand...
Click to collapse
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
EDIT: New approach added, now there is choice and easyness for all
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
Click to expand...
Click to collapse
Thanks
Jonathon Grigg said:
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
Thanks
Click to expand...
Click to collapse
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step. Once you're in clockwork you pretty much own the phone. I'll be interested to see if someone can use clockwork to flash a new boot image once rooted without the unlock; if so I can't see any reason to unlock the bootloader. That said, mine is unlocked, and I like it that way, but many won't root for fear of losing data on the phone.
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it. I guess that's there own fault for not doing enough searching on their own...
Anyways, nice and thorough effort. I'm sure many will benefit from your additions to AllGamer's tutorial.
distortedloop said:
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step.
Click to expand...
Click to collapse
I have been wondering that myself. My guess is that for the average user you don't need to, but maybe it's for real power users who build their own ROM which has been fully modded or something, I'm not sure.
but many won't root for fear of losing data on the phone.
Click to expand...
Click to collapse
I definitely agree with that, and your guide is probably the best way for those people!
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
Click to expand...
Click to collapse
Exactly, this is one of the better uses for both methods. I already had to wipe my phone twice due to Samsung CS so I'm used to it Although it does give you a chance to clear out the apps you don't need. Doing that I noticed better battery life on my phone.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it.
Click to expand...
Click to collapse
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Thanks distortedloop
This is awesome cause i relocked my bootloader i really just needed root. Thanks!
Edit oops lost track of tabs open.
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Jonathon Grigg said:
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Click to expand...
Click to collapse
Nicely done. Thanks.
sam4free said:
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Click to expand...
Click to collapse
That's what I suggesting a couple of posts above (root without unlock to at least make a backup of user data).
Restoring a titanium backup would not re-lock the phone. A nandroid restore might, depends on what all it imaged and restores, but it's so easy to re-root, that doesn't seem like a big deal.
Jonathon Grigg said:
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Click to expand...
Click to collapse
Looks like you forgot to add the link in your copy pasta.
AtomicPC said:
Looks like you forgot to add the link in your copy pasta.
Click to expand...
Click to collapse
I've been working on it I just wanted to get it up here as soon as I could That's why I mentioned that the full guide is available on my website. I'm going back to school today, so I don't really have too much time for changing links now. Besides, most people on XDA should know how to look at the 'What's needed' part
Sent from my Nexus S using XDA App
Jonathon,
Thank you for posting this detailed guide to rooting without losing your data! I do have a question. As you've probably heard, there are a few updates coming soon and if they are like they were on the N1, they always broke root. So getting root back was tricky unless I "unrooted" before applying the update. Using your method, is it easy to "unroot"? Thanks!
No problems
As for your problem, I never actually had a N1 so I don't exactly know why that would happen. So far from the 2 updates available to NS owners it seems like the OTA update does break root but it appears to be the same to get it back again. Can someone confirm this? I haven't been through an update with my root yet.
As for unrooting, if you haven't unlocked the bootloader (so you have followed the new part 2) I think it is just a case of finding a stock image (I think there's a GRH78 one around here somewhere) and booting into Clockwork Recovery and flashing it. That should remove root and then also give you a notice to install the GRH78C OTA update so you get the latest version.
I think that is what you meant? If you did unlock the bootloader (using the original part 2) then I think you just have to follow the same steps as I mentioned just then but afterwards go back into the bootloader interface and run 'fastboot oem lock' and it should be right.
Sent from my Nexus S using XDA App
Question on Part 2- step 1.
Code:
# We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
hmanxx said:
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
Click to expand...
Click to collapse
When I tried to use the fastboot command with my Nexus S connected, it would hang and not do anything, despite leaving it for about 5 minutes. I searched online, and found the PDAnet solution, so I don't know what the difference is exactly. All I found the Google SDK USB drivers to do is enable you to see your device in Device Manager, however you could try it without the PDAnet drivers, and let me know what happens!
Thanks
Thanks for the prompt reply.. I tried out the google driver..it doesnt work under fastboot. I eventually get the fastboot enabled driver..that could explain why the pdanet driver required.
After i installed the fastboot enabled driver, i could test the connectivity under fastboot with "fastboot devices"
thanks going to try out rooting..i just want simple root access..without wiping data is a ++ ..
I managed to run fastboot boot recovery.img...going into clockwork menu..apply the superuser.zip.(for froyo version)..till completion..no word of failure..
However after rebooting, su and SuperUser.apk are not installed.( I used adb to check the system/app and system/bin folder.
Edit- manage to root properly after system mounting .
Just a note..to properly complete the rooting, one need to apply mounting then mount system before applying the Superuser.zip install from sdcard.
Prior to step 11, you may want to add the following steps for folks having problem to get the superuser.zip to install properly.
Originally Posted by droidmage
So all you guys who are having trouble getting root inside the rom, When your in recovery before you flash the superuser.zip file select -- mounts and storage -- then --mount /system -- then flash the .zip file and reboot
Click to expand...
Click to collapse
Thanks for the extra bit of info, I will attempt to add that in when I get a bit more time on my hands. when I did it it seemed to work fine so thanks for discovering that!
Enjoy your rooted phone
Sent from my Nexus S using XDA App
Hello guys,
I'm a new noob in the forum. I was following the thread about android on kindle fire hd7 and since this weekend (ty hashcode :good seems i can try the rom on my kindle device. Now... i'm totally noob in this kind of operation, there is something vital or important i have to know before i brick my kindle fire?? OR i can just follow the instruction, install bootloader and then loading the rom? There is a video or something more deep to read before try to install?? Thank you and thank you for your future answer,
Petar
PetarHolland said:
Hello guys,
I'm a new noob in the forum. I was following the thread about android on kindle fire hd7 and since this weekend (ty hashcode :good seems i can try the rom on my kindle device. Now... i'm totally noob in this kind of operation, there is something vital or important i have to know before i brick my kindle fire?? OR i can just follow the instruction, install bootloader and then loading the rom? There is a video or something more deep to read before try to install?? Thank you and thank you for your future answer,
Petar
Click to expand...
Click to collapse
If you haven't already, read this...
http://forum.xda-developers.com/showthread.php?t=2228534
...it will tell you what you need to know to avoid bricking your device, and how to restore it if needed.
Thanks, i will read this, then i'll post here if i still need some information The entire process seems to be very hard ^^
soupmagnet said:
If you haven't already, read this...
http://forum.xda-developers.com/showthread.php?t=2228534
...it will tell you what you need to know to avoid bricking your device, and how to restore it if needed.
Click to expand...
Click to collapse
I'm stoked to see the outcome of that great work of porting the ROM to our kindle fires 7''.
Congrats for that great effort!
I was following the instructions you've provided. Apparently, my situation is that i'm in the 2x2 cell.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Therefore, I have the ADB drivers installed but can not achieve to enter in fastboot mode. What should I do? Should l install android's SDK? Here I'm completely lost in how to proceed...
Thanks in advance
Root first, so head to the QEMU root thread in the Development forum. After that, install the 2nd-bootloader by Hashcode, I recommend you use the FireFlash app in the Themes and Apps forum, just download the files from Hashcode's thread, plug them in, hit flash, and hold Volume-Up when you see the orange Kindle logo, all the way until it turns blue, then release a few seconds after.
Recovery does take a minute to appear, so now you're into TWRP recovery, go ahead and reboot, then download the ROM from Hashcode's CM10.1 thread with the GApps. Transfer the .zip files (both of them, the ROM and the GApps) to the internal storage. Boot into recovery by shutting down, powering on, and hold Volume-Up, same deal. Once you're into TWRP, wipe system and factory reset. After that's done, flash the ROM and the GApps, and you're done. Reboot, and voila.
ed! said:
I'm stoked to see the outcome of that great work of porting the ROM to our kindle fires 7''.
Congrats for that great effort!
I was following the instructions you've provided. Apparently, my situation is that i'm in the 2x2 cell.
Therefore, I have the ADB drivers installed but can not achieve to enter in fastboot mode. What should I do? Should l install android's SDK? Here I'm completely lost in how to proceed...
Thanks in advance
Click to expand...
Click to collapse
Yes, you need to install Android SDK. What allows you to use fastboot is the fastboot.exe file in the /platform-tools folder after you install the SDK. There are many guides on YouTube to doing this.
Thanks for your very kind reply, seokhun
I'm a bit confused now. Do I still need fastboot commands and SDK for the method you suggested? I mean, the one with the app that flashes everything....
Sorry If i'm asking too many questions but as a noob, I'd like to be very cautious with the procedure. I'm still not familiar with the kindle's way. I wish I were with my Samsung Galaxy phone flashing custom roms
I forgot to mention, I was already rooted and have stock rom with bootloader 7.3.1
Indeed... The entire process is hard, i'm trying to organize the information. SO the step are:
-Fastboot
-Installing bootloader
-Cleaning the system/exporting img
-Installing the rom
-Wipe
-Reboot
android :victory:
Right?
Some questions:
I read about a special cable, i can't do the process with the standard miniusb cable?
I read about downgrade the firmware of my kindle... I have the 7.3.0.3 version, i need to downgrade before install the bootloader right?
ed! said:
Thanks for your very kind reply, seokhun
I'm a bit confused now. Do I still need fastboot commands and SDK for the method you suggested? I mean, the one with the app that flashes everything....
Sorry If i'm asking too many questions but as a noob, I'd like to be very cautious with the procedure. I'm still not familiar with the kindle's way. I wish I were with my Samsung Galaxy phone flashing custom roms
I forgot to mention, I was already rooted and have stock rom with bootloader 7.3.1
Click to expand...
Click to collapse
@PetarHolland
I'll try to answer your questions:
Factory cable
You do not absolutely need a factory cable to get into fastboot mode. When you have successfully rooted your device and have the adb drivers setup correctly, the command adb shell su -c "reboot bootloader" will do the trick. A factory cable can be considered an insurance: If push comes to shove and you brick your device, the factory cable will force the Kindle to boot up in fastboot mode.
Firmware downgrade
Just follow Hashcode's instructions given here: http://forum.xda-developers.com/showthread.php?t=2128848 (Step 4.5). Works like a charm.
Good luck to you!
Nice, that's really nice... So i just need to install the bootloader first following the instruction, then install the rom doing the 4.5 step. My doubt are cleared now, i will try tonight I hope with success
E_Zatopek said:
@PetarHolland
I'll try to answer your questions:
Factory cable
You do not absolutely need a factory cable to get into fastboot mode. When you have successfully rooted your device and have the adb drivers setup correctly, the command adb shell su -c "reboot bootloader" will do the trick. A factory cable can be considered an insurance: If push comes to shove and you brick your device, the factory cable will force the Kindle to boot up in fastboot mode.
Firmware downgrade
Just follow Hashcode's instructions given here: http://forum.xda-developers.com/showthread.php?t=2128848 (Step 4.5). Works like a charm.
Good luck to you!
Click to expand...
Click to collapse
PetarHolland said:
Nice, that's really nice... So i just need to install the bootloader first following the instruction, then install the rom doing the 4.5 step. My doubt are cleared now, i will try tonight I hope with success
Click to expand...
Click to collapse
Just a note of caution, as with all flashing of rom's. Whilst the fastboot cable is not 'required/essential' if you do mess it up , there is a potential that you 'could' brick, and depending to what extent your at, the cable becomes vital. In a nutshell if you can get your hands on a cable its recommeded as the earlier thread stated its a kind of insurance!
Good luck
kgyuszko
Thanks to all for your support. Everything worked out as expected and now I'm digging in the Recovery menu
There's one simple step I have to added to the ones written by Hashcode. That is, when trying to copy stack file to /data/local/tmp I had to change permissions to that folder in order to make the transfer happen. Originally was set to rwx-rwx-x and the adb push command failed.
Apart from this, as I said, everything flew as expected
Roughly, what I did was:
- Root the kindle 7.3.1 stock rom with Bin4ry_v28
- Install android SKD
- Follow step by step Hashcode's guide taking care to the permission change of /data/local/tmp till I reached the part of the fastboot commands.
- Active the fastboot with the following command and continue with the steps of the guide:
Code:
adb shell su -c "reboot bootloader"
Now the upcoming and logical question (i guess) is how do you buckup all you current apps and data before flashing a custom ROM?
Guys i stopped myself at the first step.. i followed the root instruction, i've done the file Path trick, and now i'm able to write ADB on my cmd terminal and see all the information, on the device setup i see the android composite adb interface BUT when i launch the RootQemu file this is the message i recive when i try to launch the app: You must install your device specific driver so that the device is visible to ADB. Any way to proceed??? thanks ( i'm running 7.3.1)
ed! said:
Thanks to all for your support. Everything worked out as expected and now I'm digging in the Recovery menu
There's one simple step I have to added to the ones written by Hashcode. That is, when trying to copy stack file to /data/local/tmp I had to change permissions to that folder in order to make the transfer happen. Originally was set to rwx-rwx-x and the adb push command failed.
Apart from this, as I said, everything flew as expected
Roughly, what I did was:
- Root the kindle 7.3.1 stock rom with Bin4ry_v28
- Install android SKD
- Follow step by step Hashcode's guide taking care to the permission change of /data/local/tmp till I reached the part of the fastboot commands.
- Active the fastboot with the following command and continue with the steps of the guide:
Code:
adb shell su -c "reboot bootloader"
Now the upcoming and logical question (i guess) is how do you buckup all you current apps and data before flashing a custom ROM?
Click to expand...
Click to collapse
from ondom
UPDATE:
i used the bin4ry v29 to root my kindle fire, i have the superuser folder on my app screen, so i think everythings goes ok. now following the hashcode instruction to get Bootloader, i'm stucked launching the fastboot mode:
i type in my cmd:
fastboot -i 0x1949 getvar product
I get the <waiting for device> screen
but when i connect my kindle, they start normally and no "product: Tate-XXX-XX" screen appear.
Where i'm wrong??? How can i launch the fastboot mode?
PetarHolland said:
Guys i stopped myself at the first step.. i followed the root instruction, i've done the file Path trick, and now i'm able to write ADB on my cmd terminal and see all the information, on the device setup i see the android composite adb interface BUT when i launch the RootQemu file this is the message i recive when i try to launch the app: You must install your device specific driver so that the device is visible to ADB. Any way to proceed??? thanks ( i'm running 7.3.1)
Click to expand...
Click to collapse
ed! said:
Thanks to all for your support. Everything worked out as expected and now I'm digging in the Recovery menu
There's one simple step I have to added to the ones written by Hashcode. That is, when trying to copy stack file to /data/local/tmp I had to change permissions to that folder in order to make the transfer happen. Originally was set to rwx-rwx-x and the adb push command failed.
Apart from this, as I said, everything flew as expected
Roughly, what I did was:
- Root the kindle 7.3.1 stock rom with Bin4ry_v28
- Install android SKD
- Follow step by step Hashcode's guide taking care to the permission change of /data/local/tmp till I reached the part of the fastboot commands.
- Active the fastboot with the following command and continue with the steps of the guide:
Code:
adb shell su -c "reboot bootloader"
Now the upcoming and logical question (i guess) is how do you buckup all you current apps and data before flashing a custom ROM?
Click to expand...
Click to collapse
Once you have Hashcode's TWRP build, simply backup using the Backup option from the recovery's main menu. If anything occurs when you flash ROMs, boot back into recovery and restore.
PetarHolland said:
UPDATE:
i used the bin4ry v29 to root my kindle fire, i have the superuser folder on my app screen, so i think everythings goes ok. now following the hashcode instruction to get Bootloader, i'm stucked launching the fastboot mode:
i type in my cmd:
fastboot -i 0x1949 getvar product
I get the <waiting for device> screen
but when i connect my kindle, they start normally and no "product: Tate-XXX-XX" screen appear.
Where i'm wrong??? How can i launch the fastboot mode?
Click to expand...
Click to collapse
Your fastboot isn't working properly. Did you make sure that your fastboot worked? In order for fastboot to work, you must have installed Android SDK. Videos are available on YouTube to help you do this. Once you correctly set up Android SDK, you will automatically have fastboot.
Otherwise, your ADB drivers aren't working. When you turn on the tablet, go to Settings > Security > ADB and turn it on. Then plug your tablet into the computer. Now your ADB drivers will be installed. This will allow you to use fastboot.
How can i test if my fastboot work? if i type fastboot on cmd i have the entire instruction of fastboot, so the command is recognised....
seokhun said:
Once you have Hashcode's TWRP build, simply backup using the Backup option from the recovery's main menu. If anything occurs when you flash ROMs, boot back into recovery and restore.
Your fastboot isn't working properly. Did you make sure that your fastboot worked? In order for fastboot to work, you must have installed Android SDK. Videos are available on YouTube to help you do this. Once you correctly set up Android SDK, you will automatically have fastboot.
Otherwise, your ADB drivers aren't working. When you turn on the tablet, go to Settings > Security > ADB and turn it on. Then plug your tablet into the computer. Now your ADB drivers will be installed. This will allow you to use fastboot.
Click to expand...
Click to collapse
fastboot -i 0x1949 getvar product
<waiting for device>
but when i plug my kindle fire and reboot, no fastboot, still <waiting for device>
I previously installed the sdk developer tool and changed the PATH adding the skd folder path to the windows shortcut for the cmd.
soupmagnet said:
fastboot -i 0x1949 getvar product
Click to expand...
Click to collapse
You don't reboot. When you enter that command and get the <waiting>, leave the tablet turned off and just plug it in. If your fastboot works, you'll be in fastboot mode.
Nope, i tryed every possibility, plugging turned off, plugging turned on and reboot, leaving to "waiting for device" for 2 hours, and nothing happened. soupmagnet suggested me to use the kindle first aid script to reinstall the adb drivers, seems the best option atm....
seokhun said:
You don't reboot. When you enter that command and get the <waiting>, leave the tablet turned off and just plug it in. If your fastboot works, you'll be in fastboot mode.
Click to expand...
Click to collapse
Cyanogenmod logo all the time
seokhun said:
Root first, so head to the QEMU root thread in the Development forum. After that, install the 2nd-bootloader by Hashcode, I recommend you use the FireFlash app in the Themes and Apps forum, just download the files from Hashcode's thread, plug them in, hit flash, and hold Volume-Up when you see the orange Kindle logo, all the way until it turns blue, then release a few seconds after.
Recovery does take a minute to appear, so now you're into TWRP recovery, go ahead and reboot, then download the ROM from Hashcode's CM10.1 thread with the GApps. Transfer the .zip files (both of them, the ROM and the GApps) to the internal storage. Boot into recovery by shutting down, powering on, and hold Volume-Up, same deal. Once you're into TWRP, wipe system and factory reset. After that's done, flash the ROM and the GApps, and you're done. Reboot, and voila.
Yes, you need to install Android SDK. What allows you to use fastboot is the fastboot.exe file in the /platform-tools folder after you install the SDK. There are many guides on YouTube to doing this.
Click to expand...
Click to collapse
I did exactly this and now i get the cyanogenmod logo all the time after reboot. been this way for 40 mins already. Can someone suggest what to do next?
NOTE: Since I am a semi-amateur at unlocking/rooting, this is not independent development. Instead, I noticed these forums don't seem to have a single one-stop guide that lays out the process for safely rooting the latest (9.0.7) Oxygen OS 9.0.7. This process may seem obvious to experts, but for people who are rusty or new to this, I wanted a process that didn't require lots of extra cross-referencing and research. I hope this is ok.
Big thanks to Dameon87 who supplied the patched boot rom, and deserves all the credit for the actual hard work with the patched boot image.
STEP 1: PREPARATION
Check that your phone is on 9.0.7.
On PC: Download patched_boot-9.0.7.img and MagiskManager-v6.0.1.apk from Dameon87's thread ( https://forum.xda-developers.com/oneplus-6t/how-to/9-0-7-patched-magisk-boot-img-t3875498 ) . Download ADB Tools if you don't have them ( https://developer.android.com/studio/releases/platform-tools#download ) and extract to a folder. Copy patched_boot-9.0.7.img to your PC’s ADB root directory (the directory with fastboot.exe and adb.exe).
On phone: Boot into OOS. Navigate to Setup->About Phone. Tap Build Number until you turn on Developer Options.
On phone: Navigate to System->Developer Options. Enable OEM Unlocking and USB Debugging.
STEP 2: UNLOCKING
Connect your phone to your PC. Click ok on the OEM Debugging prompt on your phone.
On PC: Open a command prompt [Windows: Start->type "cmd.exe"], and navigate to the ADB tools directory. Run this command in the command prompt:
Code:
adb reboot bootloader
The phone should reboot to the bootloader.
On PC: When phone finishes rebooting to the bootloader, run this command in the command prompt:
Code:
fastboot oem unlock
IMPORTANT: ALL DATA WILL BE ERASED WHEN YOU DO THIS, INCLUDING ANY PERSONAL DATA, TEXTS, PHOTOS, MUSIC, ETC. If the phone has been used, please move your files off your device first! The phone will take some time to factory reset.
On Phone: Repeat Preparation Steps 3-4 to turn back on OEM Debugging in OOS.
STEP 3: INSTALLING MAGISK
On PC: Copy MagiskManager-v6.0.1.apk to the phone.
On PC: In the command prompt window, run this command (note this .img file should be in the adb.exe and fastboot.exe directory):
Code:
fastboot boot patched_boot-9.0.7.img
Phone will reboot.
On Phone: Use a file manager app to install MagiskManager-v6.0.1.apk (I use Astro or ES, but admittedly there are probably better ones out there).
On Phone: Open the Magisk Manager App, agree to the setup popup, and click install. When prompted, choose Direct Install.
On Phone: Reboot.
On Phone: In the OS, open Magisk Manager again and add MagiskHide exceptions.
This enabled all apps that I typically need SafetyNet for, including Pokemon Go, Netflix and Google Pay, as well as of course all root apps like TItanium Backup.
Again, apologies if this seems basic, but I hope this is useful for some who don't know all of the inner workings of android unlocking and rooting by heart. If you have any improvements, feel free to suggest them.
You need to change adb oem unlock to fastboot oem unlock. Otherwise good job!
Dameon87 said:
You need to change adb oem unlock to fastboot oem unlock. Otherwise good job!
Click to expand...
Click to collapse
Ah, thanks! Fixed.
Does OTA update lock bootloader?
BesoC said:
Does OTA update lock bootloader?
Click to expand...
Click to collapse
No it doesn't, the root will be lost though.
geminium said:
No it doesn't, the root will be lost though.
Click to expand...
Click to collapse
I'm also a semi amateur at unlocking/rooting so I'm the target audience of the OP.
Ready to get my hands dirty and try it out. Last time I rooted it was on my old phone before Magisk was a thing.
I ended up not updating out of laziness.
Does magisk make OTA updates / keeping the phone up to date easier?
What's the best method for doing so if you want to keep your phone rooted?
spudsrus said:
I'm also a semi amateur at unlocking/rooting so I'm the target audience of the OP.
Ready to get my hands dirty and try it out. Last time I rooted it was on my old phone before Magisk was a thing.
I ended up not updating out of laziness.
Does magisk make OTA updates / keeping the phone up to date easier?
What's the best method for doing so if you want to keep your phone rooted?
Click to expand...
Click to collapse
Well there's quite detailed procedure explained on the forum. You'll find easily...
In general, you have to restore images in magisk, then install OOS OTA update, then install magisk to inactive slot... It's one of the easiest steps for keeping root and be up to date .
I've been rooting for almost a decade and I am grateful for this. I don't know why some of these devs always assume you know when their talking about using a PC or running shell commands. Lol. Everyone started as a noob.
Sent from my OnePlus6TSingle using XDA Labs
ScaryBugThing said:
NOTE: Since I am a semi-amateur at unlocking/rooting, this is not independent development. Instead, I noticed these forums don't seem to have a single one-stop guide that lays out the process for safely rooting the latest (9.0.7) Oxygen OS 9.0.7. This process may seem obvious to experts, but for people who are rusty or new to this, I wanted a process that didn't require lots of extra cross-referencing and research. I hope this is ok.
Big thanks to Dameon87 who supplied the patched boot rom, and deserves all the credit for the actual hard work with the patched boot image.
STEP 1: PREPARATION
Check that your phone is on 9.0.7.
On PC: Download patched_boot-9.0.7.img and MagiskManager-v6.0.1.apk from Dameon87's thread ( https://forum.xda-developers.com/oneplus-6t/how-to/9-0-7-patched-magisk-boot-img-t3875498 ) . Download ADB Tools if you don't have them ( https://developer.android.com/studio/releases/platform-tools#download ) and extract to a folder. Copy patched_boot-9.0.7.img to your PC’s ADB root directory (the directory with fastboot.exe and adb.exe).
On phone: Boot into OOS. Navigate to Setup->About Phone. Tap Build Number until you turn on Developer Options.
On phone: Navigate to System->Developer Options. Enable OEM Unlocking and USB Debugging.
STEP 2: UNLOCKING
Connect your phone to your PC. Click ok on the OEM Debugging prompt on your phone.
On PC: Open a command prompt [Windows: Start->type "cmd.exe"], and navigate to the ADB tools directory. Run this command in the command prompt:
Code:
adb reboot bootloader
The phone should reboot to the bootloader.
On PC: When phone finishes rebooting to the bootloader, run this command in the command prompt:
Code:
fastboot oem unlock
IMPORTANT: ALL DATA WILL BE ERASED WHEN YOU DO THIS, INCLUDING ANY PERSONAL DATA, TEXTS, PHOTOS, MUSIC, ETC. If the phone has been used, please move your files off your device first! The phone will take some time to factory reset.
On Phone: Repeat Preparation Steps 3-4 to turn back on OEM Debugging in OOS.
STEP 3: INSTALLING MAGISK
On PC: Copy MagiskManager-v6.0.1.apk to the phone.
On PC: In the command prompt window, run this command (note this .img file should be in the adb.exe and fastboot.exe directory):
Code:
fastboot boot patched_boot-9.0.7.img
Phone will reboot.
On Phone: Use a file manager app to install MagiskManager-v6.0.1.apk (I use Astro or ES, but admittedly there are probably better ones out there).
On Phone: Open the Magisk Manager App, agree to the setup popup, and click install. When prompted, choose Direct Install.
On Phone: Reboot.
On Phone: In the OS, open Magisk Manager again and add MagiskHide exceptions.
This enabled all apps that I typically need SafetyNet for, including Pokemon Go, Netflix and Google Pay, as well as of course all root apps like TItanium Backup.
Again, apologies if this seems basic, but I hope this is useful for some who don't know all of the inner workings of android unlocking and rooting by heart. If you have any improvements, feel free to suggest them.
Click to expand...
Click to collapse
Can you elaborate a bit more on how you got Pokemon Go working.
OS. 9.0.2 Magisk v18. Successfully rooted.
I'm selecting Pokemon Go under Magisk hide. But it still detects it. PoKe will sometimes run for about 30 secs then it gives me the error incompatible os.
Sent from my [device_name] using XDA-Developers Legacy app
Ok I'm new to this as well..I'm trying to understand the patched boot img part...so do u need the patched boot img for whichever oos ur currently running so to install magisk cleanly is that it...also I can't find the tutorial on how to install the ota's after ur rooted to where everything doesn't get erased etc..I need sumone to point me in the right area to look..I found a lil bit on it once but now I can't seem to find it..thx to everyone in this great community for all the time and effort all put into this. It's so easy to overlook all the hard work that gets done behind the scenes..so I just thank u personally for what u do for us...
SOLVED:
The reason Device was not detected in Fastbootmode was due to my new ryzen 3000 system, I tried it on my much older quad core 46XXk(?) Intel system and it gave me no problems whatsoever finding the device in fastboot mode in my first try! wtf amd!
The second Set of problems came with flashing 16.0631.1910.64. It gave me a ton of errors and it was on an infinite boot loop, nothing I tried fixed it, my device was a worthless brick in that state, but fastboot Power+Volume up > 16.0631.1910.64 worked perfectly.
I decided to instead try 16.0631.1910.35, but once I flashed it everything worked perfectly! I am in the latest version of android 10 atm and can acess banks, play nintendo games, etc with the rooted device.
Hi, I bought this phone (Rog 2) mostly Intended as a donation for a friend that was complaining on facebook that he's probably going to be homeless due to covid and didnt even have his phone since he cracked the screen. While I cant help with housing I can help with a measly phone and I heard for gaming this is one of the best.
I got the tencent version not knowing what the heck I was getting myself into ( I thought all ROG 2 were the same and didn't even think to look it up). Been googling for days, I am trying to make this a full WW variant and basically as hassle free as possible for him, it seems that it has an obscure version of "pkq1.190414.001.ww_phone-16.0622.1906.19-0 " Rom, but according to HWInfo the fingerprint is CN.
Problem is I tried following this guide, I unlocked the bootloader with the ROG phone unlock tool, but on step 2 I load into fastboot, click flashall_AFT but all I see is a cmd with the message [command] : fastboot.exe flash all WW_ZS660KL_16.0631.1910.35_M3.13.33.30-ASUS_1.1.207_Phone-user.raw and nothing happens.
I noticed that on the cmd of the minimal adb devices and fastboot folder, the "adb devices" gives my device , the "adb reboot bootloader" works by taking me to the bootloader, but the "fastboot devices" does not give me anything at all once im in bootloader. In fact when using adb reboot bootloader I hear the windows beep as if the cellphone is disconecting. Any ideas what is going on?
TeknoViking- said:
Hi, I bought this phone (Rog 2) mostly Intended as a donation for a friend that was complaining on facebook that he's probably going to be homeless due to covid and didnt even have his phone since he cracked the screen. While I cant help with housing I can help with a measly phone and I heard for gaming this is one of the best.
I got the tencent version not knowing what the heck I was getting myself into ( I thought all ROG 2 were the same and didn't even think to look it up). Been googling for days, I am trying to make this a full WW variant and basically as hassle free as possible for him, it seems that it has an obscure version of "pkq1.190414.001.ww_phone-16.0622.1906.19-0 " Rom, but according to HWInfo the fingerprint is CN.
Problem is I tried following this guide, I unlocked the bootloader with the ROG phone unlock tool, but on step 2 I load into fastboot, click flashall_AFT but all I see is a cmd with the message [command] : fastboot.exe flash all WW_ZS660KL_16.0631.1910.35_M3.13.33.30-ASUS_1.1.207_Phone-user.raw and nothing happens.
I noticed that on the cmd of the minimal adb devices and fastboot folder, the "adb devices" gives my device , the "adb reboot bootloader" works by taking me to the bootloader, but the "fastboot devices" does not give me anything at all once im in bootloader. In fact when using adb reboot bootloader I hear the windows beep as if the cellphone is disconecting. Any ideas what is going on?
Click to expand...
Click to collapse
Have you installed adb drivers https://github.com/koush/UniversalAdbDriver
Also, just checking the obvious, you are using the side port of the phone, not the bottom, right?
reg66 said:
Have you installed adb drivers https://github.com/koush/UniversalAdbDriver
Also, just checking the obvious, you are using the side port of the phone, not the bottom, right?
Click to expand...
Click to collapse
Hi! Yeah, I have the exact same driver you mentioned as well as Minimal ADB and Fastboot and using the black sideport.
It seems when I connect it during the fastboot(Green arrow menu) I do hear the "USB Device plugged" sound so there's that.
flashall_AFT still just gives me a black page with: [command] : fastboot.exe flash all WW_ZS660KL_16.0631.1910.35_M3.13.33.30-ASUS_1.1.207_Phone-user.raw
TeknoViking- said:
Hi! Yeah, I have the exact same driver you mentioned as well as Minimal ADB and Fastboot and using the black sideport.
It seems when I connect it during the fastboot(Green arrow menu) I do hear the "USB Device plugged" sound so there's that.
flashall_AFT still just gives me a black page with: [command] : fastboot.exe flash all WW_ZS660KL_16.0631.1910.35_M3.13.33.30-ASUS_1.1.207_Phone-user.raw
Click to expand...
Click to collapse
Before running flashall_AFT.cmd, when you hear the device connect, have you tried entering 'fastboot devices' before doing anything else? See if it gives you a serial. If it does.
Then have you removed the original zip file from the extracted folder that contains the raw img? Once you click flashall_AFT.cmd, the cmd window should stay open for around 5 minutes while the flash takes place, then the phone will reboot once done
reg66 said:
Before running flashall_AFT.cmd, when you hear the device connect, have you tried entering 'fastboot devices' before doing anything else? See if it gives you a serial. If it does.
Then have you removed the original zip file from the extracted folder that contains the raw img? Once you click flashall_AFT.cmd, the cmd window should stay open for around 5 minutes while the flash takes place, then the phone will reboot once done
Click to expand...
Click to collapse
Top left image is from using the "fastboot devices" command, as you can see I type it it doesn't show or seem to do anything really. The right image is from clicking flashall_AFT, both inside bootloader on my rog 2 and outside give the same result.
The Zip file? As in the 2.7 one I downloaded? Yeah that content of that is in a folder in root of C drive, the zip is in a completely different drive so they are not sharing a directory . I did not modify anything inside the extracted file though.
For reference I am following the steps here: https://forum.xda-developers.com/t/...rom-cn-to-ww-with-latest-1910-35-raw.4002279/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeknoViking- said:
Top left image is from using the "fastboot devices" command, as you can see I type it it doesn't show or seem to do anything really. The right image is from clicking flashall_AFT, both inside bootloader on my rog 2 and outside give the same result.
The Zip file? As in the 2.7 one I downloaded? Yeah that content of that is in a folder in root of C drive, the zip is in a completely different drive so they are not sharing a directory . I did not modify anything inside the extracted file though.
For reference I am following the steps here: https://forum.xda-developers.com/t/...rom-cn-to-ww-with-latest-1910-35-raw.4002279/
View attachment 5173971
Click to expand...
Click to collapse
Ok, try unpacking the attached zip to root of C, like the other adb folder. Then click on 'cmd-here.exe' to launch cmd window and then try 'fastboot devices'. (that's assuming the drivers of the original install are working). Let me know if you get a serial response.
reg66 said:
Ok, try unpacking the attached zip to root of C, like the other adb folder. Then click on 'cmd-here.exe' to launch cmd window and then try 'fastboot devices'. (that's assuming the drivers of the original install are working). Let me know if you get a serial response.
Click to expand...
Click to collapse
Done, nothing happens, did it multiple times here's what I get:
TeknoViking- said:
Done, nothing happens, did it multiple times here's what I get:
Click to expand...
Click to collapse
Ok, what a pain! Try uninstall minimal adb drivers and I'll see if I can find ano version for you....
reg66 said:
Ok, what a pain! Try uninstall minimal adb drivers and I'll see if I can find ano version for you....
Click to expand...
Click to collapse
Will do! ty
TeknoViking- said:
Will do! ty
Click to expand...
Click to collapse
try this version, after installing the drivers you could also try that folder with the cmd-here file in combination. Also, try booting into android os and enable developer options (click on 'build' 7 or so times in settings/system/about phone/software information/build number), then go to developer options and enable USB debugging - might make a difference...
Also, check your pm, I sent you modified instructions for using the other guide that'll take you straight to last Android 9 version before you can update to Android 10 (1910.64). You could always be downloading that newer RAW + root img while tinkering with getting the damn thing recognised by your pc!!
Tried the 1910.64 you sent me and its the same problem unfortunately, still stuck on step 2. I already had USB debugging with the "USB debugging" option ticked on when I created the topic.
I take it doing number 4 Is a bad idea if can't get past 2? "4) Download the root&bootstockww191035.zip "rootww191064" and extract it to the Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot) from here "
TeknoViking- said:
Tried the 1910.64 you sent me and its the same problem unfortunately, still stuck on step 2. I already had USB debugging with the "USB debugging" option ticked on when I created the topic.
I take it doing number 4 Is a bad idea if can't get past 2? "4) Download the root&bootstockww191035.zip "rootww191064" and extract it to the Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot) from here "
Click to expand...
Click to collapse
Yeah, there's no point continuing until you can get fastboot devices to at least show your device. Do you have another pc/laptop you could try on? Are you using an AMD based system, pretty sure I read somewhere that can give issues, along with the system used! Sorry that's a bit vague...
TeknoViking- said:
Tried the 1910.64 you sent me and its the same problem unfortunately, still stuck on step 2. I already had USB debugging with the "USB debugging" option ticked on when I created the topic.
I take it doing number 4 Is a bad idea if can't get past 2? "4) Download the root&bootstockww191035.zip "rootww191064" and extract it to the Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot) from here "
Click to expand...
Click to collapse
Oh sorry, you meant try flashing the root img, NO, definitely not. The root img MUST only flashed after successful flashing of RAW - both rom and boot/root boot img's must match. (But either way, if your device isn't recognised by fastboot it just won't flash, just an FYI)
See this thread for info on Ryzen issues, if that is what you're running. The OP says he used an external USB hub as a solution
reg66 said:
Yeah, there's no point continuing until you can get fastboot devices to at least show your device. Do you have another pc/laptop you could try on? Are you using an AMD based system, pretty sure I read somewhere that can give issues, along with the system used! Sorry that's a bit vague...
Click to expand...
Click to collapse
Ok I tried this on my intel system and it detected it!! "fastboot devices" gave me the serial. So when I tried to do step 2 and I used ADB_FASTBOOT to run flashall_AFT from the 1910.64 it failed and it it seems to be on a loop in bootloader "The boot loader is unlocked and software integrity cannot be guaranteed..) etc screen.
I attached the image. This is with the 1910.64 on step two.
Also I got this from continually trying to boot:
TeknoViking- said:
Ok I tried this on my intel system and it detected it!! "fastboot devices" gave me the serial. So when I tried to do step 2 and I used ADB_FASTBOOT to run flashall_AFT from the 1910.64 it failed and it it seems to be on a loop in bootloader "The boot loader is unlocked and software integrity cannot be guaranteed..) etc screen.
I attached the image. This is with the 1910.64 on step two.
Click to expand...
Click to collapse
Hmm, this phone is troublesome. Sorry dude, I've not seen that before. The bootloader unlock tool definitely worked, right? What about if you try using the original 1910.35 RAW - same error?
TeknoViking- said:
Also I got this from continually trying to boot:
Click to expand...
Click to collapse
Do you have above 50% charge? If not, definitely make sure to have enough charge for the whole process. I was always of the understanding, as a rule of thumb, to have devices above 50% before performing flashing of custom roms etc
reg66 said:
Do you have above 50% charge? If not, definitely make sure to have enough charge for the whole process. I was always of the understanding, as a rule of thumb, to have devices above 50% before performing flashing of custom roms etc
Click to expand...
Click to collapse
Yeah the charge is over 90 percent, anything I can do for that error? when I connect to the intel pc it doesn't even beep any more. I still can access the boot screen though.
EDIT: OOPS, noticed I had it plugged on the bottom, nvm intel system still detects the device. I did perform everything on the side port usb but I took it out to try and check back on the ryzen system.
TL;DR- I'm trying to get back to Android 11 but I only have access to the fastboot menu since my phone is bootlooping. I'm fairly certain I hadn't enabled USB debugging when the phone was fully functional so I'm not sure if I can use ADB to do so. I also don't have the bootloader unlocked
I downloaded the 12 beta preview last week to try the new features, some UI bugs understandably but was mostly fine. A couple days ago while the screen was off and I just had the phone in my hand it randomly activated SOS mode so after a brief panic and cancelation of the 911 call I opted out of the beta immediately. The next morning after using my phone a bit I picked it up and noticed it was rebooting and was a little warm, and it's been bootlooping since then. I still remember the Andoid 12 UI being active so I'm pretty sure it hadn't reverted to the "new" 11 firmware yet.
I'm trying to revert back to 11 using the ADB on my PC, but I realized that I'm pretty sure I hadn't enabled USB debugging when my phone was still functional, so I'm not sure how to bypass that if I can at all. The web firmware flasher tool does detect my phone, but can't properly connect and I assume it's because the USB debugging isn't enabled.
Before I tried using the ADB I had attempted to perform a factory reset to fix the bootloop and the log messages said it was successfully done, but that didn't get it out of the loop.
@jet flyer
I didn't see the word "locked" or "recovery" anywhere in your post. If you are bootloader unlocked, you use fastboot to flash a full image. If you are BL locked, that should have been in your TL;DR. If you are BL locked, you can still flash a full OTA without having usb debug enabled. You just need to have the latest fastboot/adb binaries installed. Download the rescue OTA, put it in your adb folder and then from recovery mode, use the update via adb option. You do NOT need usb debug enabled to do this. You do however need a working Recovery mode. If you are BL locked and cannot access recovery that is the end of the road.
Sorry for the delayed response wanted a day off so I had enough time to properly deal with this. No it's not unlocked, edited OP to indicate that.
I only downloaded adb last week so that should be the most recent, are the fastboot binaries included in that install or is that something separate?
Using this video for help on how to run adb
I get the device connected sound on my PC when I select install from ADB on the recovery menu and I have ADB running at the C:\adb folder location. when I do the adb devices command I get this
'adb' is not recognized as an internal or external command,
operable program or batch file.
using the powershell I got the long list of text that's mentioned in the video after typing \adb but I still get a similar, but different, error when doing the devices command trying to confirm it's connected
Since this is probably just an error on my part not doing the right commands or something I'm hopping on the xda discord, I'll post here if I get it figured out
Download platform tools from here https://developer.android.com/studio/releases/platform-tools. Unzip it and then put the file that you want to side load in the same folder. I prefer PowerShell. Type adb sideload "file name.zip. That might not work if USB debugging isn't checked. If it doesn't try this.
Transfer the download OTA file to your device’s internal or external storage. Don’t put it inside any folder as the system won’t be able to find it.
Next up, boot your device to recovery.
From recovery, navigate to the Apply Update from SD Card option using Volume Keys. Press the Power key to confirm your selection.
Similarly, use the Volume keys to highlight the OTA.zip file and the Power key to install it. Once the process finishes, you could then use the Reboot system now option to boot your device back to OS
ok finally got something to run on my phone but got an error, here's the file paths and what I typed just in case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here's what the phone says, sorry about the marginal focus my backup pixel 2XL is doing it's best with the reflective screen. The relevant messages start right after the purple of the IR focusing laser reflection
one of the first errors is E: footer is wrong
and Error 21: signature verification failed
I recall hearing on one of those videos or guides I read that something has to be digitally signed, but this is a direct download from the Android website, wouldn't be already be signed?
jet flyer said:
ok finally got something to run on my phone but got an error, here's the file paths and what I typed just in case
View attachment 5333167
And here's what the phone says, sorry about the marginal focus my backup pixel 2XL is doing it's best with the reflective screen. The relevant messages start right after the purple of the IR focusing laser reflection
View attachment 5333175
one of the first errors is E: footer is wrong
and Error 21: signature verification failed
I recall hearing on one of those videos or guides I read that something has to be digitally signed, but this is a direct download from the Android website, wouldn't be already be signed?
Click to expand...
Click to collapse
Sorry for the delayed response, but If you use "reply" to a post the user will get an email notification and so respond more quickly. I normally check this board once a week. Yes, there is one zip file from Google that contains all the binaries you need for adb/fastboot. Yes the image coming from Google is signed. They even include the file hash so you can verify the file is a mirror image and un-corrupted. I'm going to continue down the adb method because it is fool proof and you may not be able to "push" the file to your device and use the sdcard method.
I'm not sure you have added your adb folder to your PC's path statement and this could be causing an issue. If you add this folder to the path, you can call up adb from any folder. However if you have the ota image in the same adb folder, and you navigate to that same folder before typing commands it will still work. I'm not seeing any of your inputs on your photo, so I can't check that. You can easily copy/paste text from the command window so we can clearly see what you are typing and the response back. What response are you getting to "adb devices" and "adb version" ? Until you get back your phone's serial number as a response, you are not connected properly. You can PM me for more assistance or use the reply button on this note. Best of luck.
v12xke said:
Sorry for the delayed response, but If you use "reply" to a post the user will get an email notification and so respond more quickly. I normally check this board once a week. Yes, there is one zip file from Google that contains all the binaries you need for adb/fastboot. Yes the image coming from Google is signed. They even include the file hash so you can verify the file is a mirror image and un-corrupted. I'm going to continue down the adb method because it is fool proof and you may not be able to "push" the file to your device and use the sdcard method.
I'm not sure you have added your adb folder to your PC's path statement and this could be causing an issue. If you add this folder to the path, you can call up adb from any folder. However if you have the ota image in the same adb folder, and you navigate to that same folder before typing commands it will still work. I'm not seeing any of your inputs on your photo, so I can't check that. You can easily copy/paste text from the command window so we can clearly see what you are typing and the response back. What response are you getting to "adb devices" and "adb version" ? Until you get back your phone's serial number as a response, you are not connected properly. You can PM me for more assistance or use the reply button on this note. Best of luck.
Click to expand...
Click to collapse
Ah sorry, still getting used to the specifics of this forum. Thanks for checking though.
I do get the serial number back as a response to verify I'm properly connected, I just didn't do it in that specific instance to avoid posting that online. And yes I did add it to the path(as far as I understand, that's just a convenience thing though?) but I'm still running it from the ADB folder just to be sure.
I'll go ahead and type here what commands I did and what the phone log says, since it's not in focus in the picture.
on adb I typed .\adb sideload coral-[specific file version].zip
adb response: Total xfer: 0.00x
on my phone which was on the load from adb screen it said this:
Now send the package you wan to apply
to the device with "adb sideload <filename> . . .
Supported API: 3
Finding update package. . .
Verifying update package. . .
E:footer is wrong
Update package verification took 0.5 s (result 1).
E:Signiture verification failed
Error: 21
Install from ADB completed with status 2.
Installation aborted.
Then it tried one more time automatically with the exact same text except taking 0.6 seconds but still failing and the same error messages. Should I just download the latest package (now the June update) and try again, or did I do something wrong? The file explorer window is where I opened the powershell from and where the file was extracted to. What does error 21 mean?
jet flyer said:
Ah sorry, still getting used to the specifics of this forum. Thanks for checking though.
I do get the serial number back as a response to verify I'm properly connected, I just didn't do it in that specific instance to avoid posting that online. And yes I did add it to the path(as far as I understand, that's just a convenience thing though?) but I'm still running it from the ADB folder just to be sure.
I'll go ahead and type here what commands I did and what the phone log says, since it's not in focus in the picture.
on adb I typed .\adb sideload coral-[specific file version].zip
adb response: Total xfer: 0.00x
on my phone which was on the load from adb screen it said this:
Now send the package you wan to apply
to the device with "adb sideload <filename> . . .
Supported API: 3
Finding update package. . .
Verifying update package. . .
E:footer is wrong
Update package verification took 0.5 s (result 1).
E:Signiture verification failed
Error: 21
Install from ADB completed with status 2.
Installation aborted.
Then it tried one more time automatically with the exact same text except taking 0.6 seconds but still failing and the same error messages. Should I just download the latest package (now the June update) and try again, or did I do something wrong? The file explorer window is where I opened the powershell from and where the file was extracted to. What does error 21 mean?
Click to expand...
Click to collapse
Sorry, I don't know what error 21 means. Trying the latest image is not going to hurt at this point. Make sure you post the complete file name of the image you are trying to flash. I think there may be bootloader version mismatch that is causing the errors. Verify and post your bootloader version (fastboot menu) and OS version (recovery menu). Have you tried doing a factory reset from recovery and retrying? At this point I would keep searching "rescue ota" for tips and hints. Pasting your screen would be best, rather than retyping. Best of luck!
v12xke said:
@jet flyer
I didn't see the word "locked" or "recovery" anywhere in your post. If you are bootloader unlocked, you use fastboot to flash a full image. If you are BL locked, that should have been in your TL;DR. If you are BL locked, you can still flash a full OTA without having usb debug enabled. You just need to have the latest fastboot/adb binaries installed. Download the rescue OTA, put it in your adb folder and then from recovery mode, use the update via adb option. You do NOT need usb debug enabled to do this. You do however need a working Recovery mode. If you are BL locked and cannot access recovery that is the end of the road.
Click to expand...
Click to collapse
So I read up and Error 21 is because the bootloader is locked. I have the latest bianaries installed like you mentioned, is there something else I was missing in my process?
jet flyer said:
So I read up and Error 21 is because the bootloader is locked. I have the latest bianaries installed like you mentioned, is there something else I was missing in my process?
Click to expand...
Click to collapse
Because your bootloader is locked, you cannot flash a full image . You have to flash an OTA instead.
Secondly, the OTA you choose has to match your current bootloader version or it won't work.
Read the instructions again for flashing a rescue OTA via recovery.
1. Have you accessed the phone's recovery menu and used the update via adb option?
2. What is your current bootloader version? (recovery menu)
3. What is the full name of the file you are attempting to flash? (OTA)
https://developers.google.com/android/ota
v12xke said:
Because your bootloader is locked, you cannot flash a full image . You have to flash an OTA instead.
Secondly, the OTA you choose has to match your current bootloader version or it won't work.
Read the instructions again for flashing a rescue OTA via recovery.
1. Have you accessed the phone's recovery menu and used the update via adb option?
2. What is your current bootloader version? (recovery menu)
3. What is the full name of the file you are attempting to flash? (OTA)
https://developers.google.com/android/ota
Click to expand...
Click to collapse
ohh, I never noticed that tab at the top that says OTA, I get it now that those are needed for non-unlocked bootloaders. I see all the different versions, what does my bootloader version have to do with one of those? I only see the dates pertaining to the monthly updates, how do I know which one is for my bootloader version? I found the section specific to the Pixel 4XL
That worked!!! Thanks for the help, kinda annoyed it was as simple as that tab at the top left of the page saying OTA updated, but glad to have my phone back after 6 weeks. My Pixel 2XL did it's best but a lot of the apps I use for my action camera or drone stuff didn't even work with it haha
jet flyer said:
That worked!!! Thanks for the help, kinda annoyed it was as simple as that tab at the top left of the page saying OTA updated, but glad to have my phone back after 6 weeks. My Pixel 2XL did it's best but a lot of the apps I use for my action camera or drone stuff didn't even work with it haha
Click to expand...
Click to collapse
Happy to hear you are back up and running! Cheers.