Database Develop

[JB][412][CWM] ClockWorkMod 6.0.2.8 (FREEDOM for EUR-xxx)

tested and confirmed that after "Unlocked" is shown in hidden phonemenu(dial 3845#*880#) using fastboot oem unlock or adb reboot oem-unlock, we got access to install recovery from root shell in recovery or during regular bootup.
updated - now uses latest 6.0.2.8 + fixed adb usb in recovery when connecting to pc.
pre-required
- unlock bootloader , if you got a EUR-xxx in Settings->about phoné->software version, otherwise it seems you cannot unlock your model.
(adb reboot-bootloader ; fastboot oem unlock -> enable unlock -> wait 30sec -> remove battery)
Some notes on Unlocking bootloader
- try and make sure your phone is fully charged (100% if possible, this might do good for the unlock mechanism to work)
- remember, if you s/w upgrade menu has bootloader state: unlocked - it is ok,
- if hidden dialer menu(3845#*880#) says Unlocked, it is ok.
Click to expand...
Click to collapse
- rooted v20a device (follow instructions from here ) (new easier root method)
GUIDE:
1. when you are running unlocked bootloader and is rooted goto step 2.
2. download attached zip files and extract content to internal sdcard location
3. use adb shell or terminal from market and execute the commands below
4. you are now running with native CWM recovery and unsecure boot, which enable adb root at boot instantly.
5. boot into recovery, by rebooting device and hold VOL-DOWN during bootup. (from power-off = keep holding vol-down during power on)
execute these 2 commands for recovery image install
Code:
su
cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
or see screenshot here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
do this at your own risk, and do NOT try this on old 4.0.3, which is not with unlocked bootloader, and you are required to install KDZ again.
note: unsecure boot is not included anymore, as it was beta v20a based.
THANKS to:
skydev - for his continued effort in finding root and giving our device full freedom with boot/recovery.

nice work dexter!!!

it's so fast, in two days only everything has changed
waouh!!
Soon, Kholk's kernel and a lot of ROMS !

ROMS!!!!!!! lol

djboi2011 said:
ROMS!!!!!!! lol
Click to expand...
Click to collapse
ohhhhhhhhhh yeah :good:
- unlock bootloader (adb reboot-bootloader ; fastboot oem unlock -> enable unlock -> wait 30sec -> remove battery)
Click to expand...
Click to collapse
silly question maybe but we need specific drivers ?
EDIT : ok, I've found drivers

Good job mates! News tip~~~~

Thats so awesome, big thanx to our devs!
@Dexter_nlb:
Is there a way to lock the bootloader again, so the warranty stays intact?

Odp: [JB][412][CWM] ClockWorkMod 6.0.1.1 + unsecure images for v20a (THIS IS FREEDOM)
Very good information!
This is a new life for our LG.
Now we are waiting for custom roms (official CM! ;D).
_____________________
Swypnięte z LG Optimus 4X HD przy użyciu Tapatalk'a

F**k yeah !!!
f**k yeah!!!!!!!!!!!!!!!! finally unlocked bootloader for 4X :laugh::laugh::laugh::laugh::laugh: Today is the day of 4X HD!!! I can't wait for test kholks kernel with CM 10.1 :good: I can smell the custom roms uhhh yeah :good::victory::victory::victory::victory:
if I unlock bootloader with tutorial above can I flash CustoNexus/CM 10.1 (when CWM is available) and the bootloader will stay open?

k1337Ultra said:
Thats so awesome, big thanx to our devs!
@Dexter_nlb:
Is there a way to lock the bootloader again, so the warranty stays intact?
Click to expand...
Click to collapse
well, do you know bootloader is not already officially locked?
maybe its the BETA that opens but official will relock it, like htc, so your warranty is broken.
but no, i do not know when "fastboot oem lock" will ever work or not.

Dexter_nlb said:
maybe its the BETA that opens but official will relock it, like htc, so your warranty is broken.
Click to expand...
Click to collapse
But when it gets relocked by flashing another ROM, they can't really find out it has been unlocked in the first place, right?

sQuAshPL said:
Very good information!
This is a new life for our LG.
Now we are waiting for custom roms (official CM! ;D).
_____________________
Swypnięte z LG Optimus 4X HD przy użyciu Tapatalk'a
Click to expand...
Click to collapse
yeah, official CM with nightlies updates

BIG THANX for all on this work.We unleash the beast mmmmmmmmmmmmmmmm :laugh::laugh::laugh: yeah:good:

Re: [JB][412][CWM] ClockWorkMod 6.0.1.1 + unsecure images for v20a (THIS IS FREEDOM)
Thanks for your great work but can you give more detailed steps? It is hard to understand for a regular user like me. I maen exactly what to do step by step. Thanks in advance. And also will this CWM replace stock recovery or work aside like in ICS?
And I always wanted to say "beast unleashed"... Thanks.

absolutly AWESOME WORK Guys love you
thx to make this happen!!!
X-Mas Day Yeaaaaa
regards ice

Subhajitdas298 said:
Thanks for your great work but can you give more detailed steps? It is hard to understand for a regular user like me. I maen exactly what to do step by step. Thanks in advance. And also will this CWM replace stock recovery or work aside like in ICS?
And I always wanted to say "beast unleashed"... Thanks.
Click to expand...
Click to collapse
+1

Subhajitdas298 said:
Thanks for your great work but can you give more detailed steps? It is hard to understand for a regular user like me. I maen exactly what to do step by step. Thanks in advance. And also will this CWM replace stock recovery or work aside like in ICS?
And I always wanted to say "beast unleashed"... Thanks.
Click to expand...
Click to collapse
the steps are as simple as explained, 3 commands and you are using CWM native, which replaces stock now, so it works with VOL-down to start and so on.
so all you do is unlock + root it like explained.
i can confirm the "Unlocked" feature remains, i have flash v10h 4 times now, and i only unlocked my device once.

try to unlock..but fail...can u explain clear step for unlock..BTW, thanks for ur work

razerblade17 said:
try to unlock..but fail...can u explain clear step for unlock..BTW, thanks for ur work
Click to expand...
Click to collapse
patience?
fastboot oem unlock
answer question on screen
wait 30 seconds
unplug usb
unplug battery and let it reboot
and check you got "Unlocked" in hidden phone menu.
i did nothing else i believe, besides experiment a little with pressing buttons after i select unlock on screen, but i doubt that had any effect.
others did not report they did?

Dexter_nlb said:
the steps are as simple as explained, 3 commands and you are using CWM native, which replaces stock now, so it works with VOL-down to start and so on.
so all you do is unlock + root it like explained.
i can confirm the "Unlocked" feature remains, i have flash v10h 4 times now, and i only unlocked my device once.
Click to expand...
Click to collapse
After doing this do I have to flash V20A again?
ANd If I flash V10 after that will I be able to access CWM or it will be gone?

[Q] Can you help me with this brick?

Hey there,
I failed to upgrade my moto x to lollipop and accidentally erased the Android OS.
Basically, when I try to turn it on, it gets stuck at the moto bootlogo. If I press te volume down and the lock buttons, I do get to the boot screen (AP Fastboot Flash Mode), but, no matter what option I select, it goes back to the bootlogo and gets stuck again.
When I connect to my pc, it appears as Motorola ADB Interface at the device manager, even with Driver Signature Enforcement disabled. That makes it impossible for me to update the device with the RiffBox Drivers and, therefore, to have it accepted by Blankflash.
Is there any way to save this phone?
Thanks a lot in advance.

luiza1up said:
Hey there,
I failed to upgrade my moto x to lollipop and accidentally erased the Android OS.
Basically, when I try to turn it on, it gets stuck at the moto bootlogo. If I press te volume down and the lock buttons, I do get to the boot screen (AP Fastboot Flash Mode), but, no matter what option I select, it goes back to the bootlogo and gets stuck again.
When I connect to my pc, it appears as Motorola ADB Interface at the device manager, even with Driver Signature Enforcement disabled. That makes it impossible for me to update the device with the RiffBox Drivers and, therefore, to have it accepted by Blankflash.
Is there any way to save this phone?
Thanks a lot in advance.
Click to expand...
Click to collapse
Do you still need help with this brick?

Flarbenshweezel said:
Do you still need help with this brick?
Click to expand...
Click to collapse
Yes, please.

No one?

What model is your X? Is it a pure edition?

dustin_b said:
What model is your X? Is it a pure edition?
Click to expand...
Click to collapse
No. It wasn't the pure edition, but I unlocked the bootloader before screwing the firmware instalation

Dont worry its fixable. As long as you're still able to get it in to the boot loader mode.
Sent from my XT1095 using XDA Free mobile app

flameinthefire said:
Dont worry its fixable. As long as you're still able to get it in to the boot loader mode.
Sent from my XT1095 using XDA Free mobile app
Click to expand...
Click to collapse
What am I supposed to do, then?
Once I get to the bootloader, no matter what option I select, it goes back to that logo again and I get stuck.

Here you go..
How to unroot moto x(Return to stock): http://youtu.be/vFQiiMsDu9o
Sent from my XT1095 using XDA Free mobile app

luiza1up said:
What am I supposed to do, then?
Once I get to the bootloader, no matter what option I select, it goes back to that logo again and I get stuck.
Click to expand...
Click to collapse
You can flash your system.img in fastboot. You just have to find the right one for your model.

flameinthefire said:
Here you go..
How to unroot moto x(Return to stock): http://youtu.be/vFQiiMsDu9o
Sent from my XT1095 using XDA Free mobile app
Click to expand...
Click to collapse
It doesn't work since the phone is not recognized as a usb device. If I go to windows device manager, it shows the phone as Android Device - Motorola ADB Interface.

dustin_b said:
You can flash your system.img in fastboot. You just have to find the right one for your model.
Click to expand...
Click to collapse
How is that possible if all I can get is the fastboot screen, but any option selected leads to that boot logo again?

luiza1up said:
How is that possible if all I can get is the fastboot screen, but any option selected leads to that boot logo again?
Click to expand...
Click to collapse
What response do you get if you type "fastboot devices" ?

Steve-x said:
What response do you get if you type "fastboot devices" ?
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
0430820086 fastboot
C:\Program Files (x86)\Minimal ADB and Fastboot>

luiza1up said:
How is that possible if all I can get is the fastboot screen, but any option selected leads to that boot logo again?
Click to expand...
Click to collapse
You flash from the fastboot screen. You don't select any of the options.

dustin_b said:
You flash from the fastboot screen. You don't select any of the options.
Click to expand...
Click to collapse
First of all, thanks for all the help.
Still, I did what you suggested and now it gets stuck on that Bootloader Unlocked Warning.

luiza1up said:
First of all, thanks for all the help.
Still, I did what you suggested and now it gets stuck on that Bootloader Unlocked Warning.
Click to expand...
Click to collapse
Which version of phone do you have and which version are you flashing?

Steve-x said:
Which version of phone do you have and which version are you flashing?
Click to expand...
Click to collapse
The version I used to have before was as it follows:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, after rooting, I tried the LXE 22.46-17 firmware. That's when the OS was erased.

I finally managed to solve it.
It is a Nextel firmware, so I wasn't flashing the system.img right.
Thank you all for your kindness and answers.

Bootloop, can't access download/fastboot mode or recovery

Phone stuck rebooting over and over
Power+Vol down > doesn't show fastboot
Power+Vol up > doesn't show recovery (was twrp)
can't turn off the phone, had to wait like 8 hours because I thought maybe I could reach fastboot mode after it runs out of battery, once I plug it in the pc, it continues to loop even if I don't press the power button
I had a custom rom (PixelPlusUI) but i'm not sure that a part of the problem.
I don't care about the data, I just want to be able to reach fastboot so I can install stock rom or be able to do anything.
Thanks in advance.
Edit: This video helped me fix it:

Yep I also got hard bricked by Pixelplusui I also wrote a text guide here: https://forum.xda-developers.com/t/...ricked-redmi-note-9-merlin-hard-brick.4347025

vagelis199 said:
Yep I also got hard bricked by Pixelplusui I also wrote a text guide here: https://forum.xda-developers.com/t/...ricked-redmi-note-9-merlin-hard-brick.4347025
Click to expand...
Click to collapse
I managed to recover my phone and install stock miui rom, but couldn't get twrp recovery to work again.
I installed it a couple times (along with the vbmeta thingy) but it never worked and always booted into system, did you get it to work after you unbricked your phone?

20Holmes20 said:
I managed to recover my phone and install stock miui rom, but couldn't get twrp recovery to work again.
I installed it a couple times (along with the vbmeta thingy) but it never worked and always booted into system, did you get it to work after you unbricked your phone?
Click to expand...
Click to collapse
Didn't touch it since then, you probably would have to downgrade your firmware before installing twrp

vagelis199 said:
Didn't touch it since then, you probably would have to downgrade your firmware before installing twrp
Click to expand...
Click to collapse
I couldn't find V12.0.1.0 but I found V12.0.3.0 and V11.0.5.0. Do you know which one I should go with?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

20Holmes20 said:
I couldn't find V12.0.1.0 but I found V12.0.3.0 and V11.0.5.0. Do you know which one I should go with?
View attachment 5432517
Click to expand...
Click to collapse
That's not firmware, look here https://xiaomifirmwareupdater.com/firmware/merlin/ but they are all the latest versions so idk, maybe the ROM also contains firmware? i guess, I think I read that somewhere on xda threads about downgrading

I just realized, by flashing the stock fastboot rom, the bootloader gets locked again, that's why the TWRP wont install, you have to unlock the bootloader again

20Holmes20 said:
Phone stuck rebooting over and over
Power+Vol down > doesn't show fastboot
Power+Vol up > doesn't show recovery (was twrp)
can't turn off the phone, had to wait like 8 hours because I thought maybe I could reach fastboot mode after it runs out of battery, once I plug it in the pc, it continues to loop even if I don't press the power button
I had a custom rom (PixelPlusUI) but i'm not sure that a part of the problem.
I don't care about the data, I just want to be able to reach fastboot so I can install stock rom or be able to do anything.
Thanks in advance.
Edit: This video helped me fix it:
Click to expand...
Click to collapse
does the battery need to be drained before connecting to pc? thanks, have the same problem

riceandsunchess said:
does the battery need to be drained before connecting to pc? thanks, have the same problem
Click to expand...
Click to collapse
honestly I'm not sure, but if i had to guess, i don't think so

20Holmes20 said:
honestly I'm not sure, but if i had to guess, i don't think so
Click to expand...
Click to collapse
thank you so much

20Holmes20 said:
honestly I'm not sure, but if i had to guess, i don't think so
Click to expand...
Click to collapse
it keeps rebooting forever the filter thing doesnt work

Does anybody has AT&T V40 backup partition?

I flashed it to unlock version but I need to get back to AT&T from. Most of the links to the qfil backup are broken, please let me know if you have any info. Thanks

eddie24902005 said:
I flashed it to unlock version but I need to get back to AT&T from. Most of the links to the qfil backup are broken, please let me know if you have any info. Thanks
Click to expand...
Click to collapse
Follow this link for ATT Q. Even though it says 'horrible' in the description, they were just referring to the ATT rom in general.
good luck

AsItLies said:
Follow this link for ATT Q. Even though it says 'horrible' in the description, they were just referring to the ATT rom in general.
good luck
Click to expand...
Click to collapse
Thank you for your generosity

AsItLies said:
Follow this link for ATT Q. Even though it says 'horrible' in the description, they were just referring to the ATT rom in general.
good luck
Click to expand...
Click to collapse
Just to make sure, do I flash this with qfil? Which tutorial would you recommend? Thanks

eddie24902005 said:
Just to make sure, do I flash this with qfil? Which tutorial would you recommend? Thanks
Click to expand...
Click to collapse
Yes, use qfil. Follow this link for guide to understand how to use / install qfil.
You'll need to flash ea partition individually. It's time consuming but many have done it.
good luck

eddie24902005 said:
Just to make sure, do I flash this with qfil? Which tutorial would you recommend? Thanks
Click to expand...
Click to collapse
Here's another full AT&T backup as well.I haven't tried it,but it says it's complete.
ATT_FullBackup.zip
drive.google.com

surgemanx said:
Here's another full AT&T backup as well.I haven't tried it,but it says it's complete.
ATT_FullBackup.zip
drive.google.com
Click to expand...
Click to collapse
Thanks for your generosity

surgemanx said:
Here's another full AT&T backup as well.I haven't tried it,but it says it's complete.
ATT_FullBackup.zip
drive.google.com
Click to expand...
Click to collapse
I flashed the first Lun and then the phone cannot get back into EDL to finish the rest. Now it is brick, any thoughts?

eddie24902005 said:
I flashed the first Lun and then the phone cannot get back into EDL to finish the rest. Now it is brick, any thoughts?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It says Unknown USB Device (Device Descriptor Request Failed)

Now I can turn the phone back to download mode. But the screen says "your device has failed a routine safety check",,,,and keep looping. I guess I have to flash a from to it....if u know how to get back to EDL without booting please let me know thx

eddie24902005 said:
Now I can turn the phone back to download mode. But the screen says "your device has failed a routine safety check",,,,and keep looping. I guess I have to flash a from to it....if u know how to get back to EDL without booting please let me know thx
Click to expand...
Click to collapse
You extract the zip file.Then place all files that are in all 6 folders in to one folder.Get back in to EDL mode,and then choose the Rawprogram0.xml.When it ask for the patch0.xml hit cancel.Hit download and that should restore it.Here's how to get back in to EDL mode.

surgemanx said:
You extract the zip file.Then place all files that are in all 6 folders in to one folder.Get back in to EDL mode,and then choose the Rawprogram0.xml.When it ask for the patch0.xml hit cancel.Hit download and that should restore it.Here's how to get back in to EDL mode.
Click to expand...
Click to collapse
Hi I encountered an anti-rollback issue on LGUP while crossflashing......is there anyway that I can enter EDL while bootlooping? I cannot flash any from to my phone by LGUP now because all the patched LGUP does not allow me to flash now. Thx..

surgemanx said:
You extract the zip file.Then place all files that are in all 6 folders in to one folder.Get back in to EDL mode,and then choose the Rawprogram0.xml.When it ask for the patch0.xml hit cancel.Hit download and that should restore it.Here's how to get back in to EDL mode.
Click to expand...
Click to collapse
Got it fixed! I boot into download mode and then I have to press volume down and power key while keep pressing the volume up. It is a mess but thanks for everything!

Question Pls someone pls guide how to install a custom rom on Redmi note 10 5g

So recently the whole miui experience has been annoying with bugs and i really want to install Pe on my device but I don't know how
It uses a mediatek 700 5g processor pls do guide me.. I'm new to custom roms

devixe said:
So recently the whole miui experience has been annoying with bugs and i really want to install Pe on my device but I don't know how
It uses a mediatek 700 5g processor pls do guide me.. I'm new to custom roms
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/...s-on-redmi-note-10-5g-poco-m3-pro-5g.4346983/
check this guide first
if you need help tell

1lopes said:
https://forum.xda-developers.com/t/...s-on-redmi-note-10-5g-poco-m3-pro-5g.4346983/
check this guide first
if you need help tell
Click to expand...
Click to collapse
well i installed the adb driver but it doesnt detect it when it's in fastboot mode
only when the device is fully ON

devixe said:
well i installed the adb driver but it doesnt detect it when it's in fastboot mode
only when the device is fully ON
Click to expand...
Click to collapse
oh seems terminal: adb devices and fastboot devices are fir different modes

1lopes said:
https://forum.xda-developers.com/t/...s-on-redmi-note-10-5g-poco-m3-pro-5g.4346983/
check this guide first
if you need help tell
Click to expand...
Click to collapse
incase this does not work do i download the fastboot or recovery firmware?

devixe said:
well i installed the adb driver but it doesnt detect it when it's in fastboot mode
only when the device is fully ON
Click to expand...
Click to collapse
maybe you need to get on the Mi Unlock tool (download it > https://en.miui.com/unlock/download_en.html)
after downloading, open it up, you'll get this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
click on the settings icon on the top right
then install the drivers. this will make fastboot mode work and make ur pc detect it whenever its in fastboot and fastbootd. follow the prompts in ur screen
devixe said:
oh seems terminal: adb devices and fastboot devices are fir different modes
Click to expand...
Click to collapse
adb is used only on system to communicate with it via commands to your phone or emulator
fastboot is used to specially manage partitions on your phone with flashing and erasing for the basics, thus doesnt work with the prefix adb and only with fastboot on both fastboot and fastbootd
devixe said:
incase this does not work do i download the fastboot or recovery firmware?
Click to expand...
Click to collapse
if you are referring to flashing stock rom, you need the fastboot firmware incase anything goes wrong, as recovery is only used to update via the miui updater app

1lopes said:
maybe you need to get on the Mi Unlock tool (download it > https://en.miui.com/unlock/download_en.html)
after downloading, open it up, you'll get this screen:
View attachment 5865423
click on the settings icon on the top right
View attachment 5865425
then install the drivers. this will make fastboot mode work and make ur pc detect it whenever its in fastboot and fastbootd. follow the prompts in ur screenView attachment 5865427
adb is used only on system to communicate with it via commands to your phone or emulator
fastboot is used to specially manage partitions on your phone with flashing and erasing for the basics, thus doesnt work with the prefix adb and only with fastboot on both fastboot and fastbootd
if you are referring to flashing stock rom, you need the fastboot firmware incase anything goes wrong, as recovery is only used to update via the miui updater app
Click to expand...
Click to collapse
fastboot flashing unlock
...
FAILED (status read failed (Too many links))
finished. total time: 7.147s

devixe said:
fastboot flashing unlock
...
FAILED (status read failed (Too many links))
finished. total time: 7.147s
Click to expand...
Click to collapse
got this error i've unlocked my bootloader aready

devixe said:
got this error i've unlocked my bootloader aready
Click to expand...
Click to collapse
fastboot unlocking is impossible, and no need to unlock if its already unlocked
now just follow the guide https://forum.xda-developers.com/t/...s-on-redmi-note-10-5g-poco-m3-pro-5g.4346983/

mi unlock tools says i have to wait 192hrs

devixe said:
mi unlock tools says i have to wait 192hrs
View attachment 5865583
Click to expand...
Click to collapse
you have mentioned that you've unlocked the bootloader already:
devixe said:
got this error i've unlocked my bootloader aready
Click to expand...
Click to collapse
well now simply wait 1 week now, maybe you have been confused, no worries
theres another way with mtkclient to instantly unlock the bootloader, but takes more time and requires installation of other programs to run it, which can be difficult setting it up

1lopes said:
you have mentioned that you've unlocked the bootloader already:
well now simply wait 1 week now, maybe you have been confused, no worries
theres another way with mtkclient to instantly unlock the bootloader, but takes more time and requires installation of other programs to run it, which can be difficult setting it up
Click to expand...
Click to collapse
Another way you sayy...well let me wait 1 week for now if it doesn't work I'll be back... thanks alot man