Related
TLDR: I tried installing AEX rom and I bricked my mi9, getting it in a fastboot loop. Flashed a bunch of things and now I think my firmware is messed up. Help.
First I flashed TWRP, then I flashed the AEX rom and gapps, but phone got in bootloop, then I tried just flashing the ROM and it worked. After I flashed gaps it got into bootloop again.
Then I read the instructions from the AEX thread and I flash the recommended Firmware file (v9.6.13), and the flash failed.
I wiped everything, reflashed the ROM without gapps, and at restart the phone. Got stuck in fastboot.
Tried reinstalling TWRP with no success. Tried flashing MIUI with their flash tool but it didn't ended the flash procedure even after 20 minutes...
I tried to directly boot the recovery image (TWRP) and I was surprised that the phone booted in MIUI, but wifi wasn't working. Did not test anything else. Restarting the phone got me again in fastboot loop.
I tried again flashing with mi flash tool and this time was succesfull.
Then I tried to flash a MIUI eu ROM and got the phone again in fastboot loop. Flash was succesfull, but when restarting TWRP said that there is no OS installed.
I decided to give up and flash global MIUI 10.2.13 back.
But now my phone has some problems. Auto brightness doesn't work and video recording freezes the camera app when image stabilization is enabled.
So, is there a way to reflash 10.2.13 rom firmware using mi flash tool?
I suppose the first Firmware flash that was unsuccessful messed the firmware up...
Or how do I get my phone back to factory status...
I suppose v9.6.13 firmware is China developer and was an upgrade and that I should downgrade to 10.2.13 rom firmware.
Or flashing developer global will solve the problem? And how do I do that?
TWRP: https://forum.xda-developers.com/Mi-9/development/recovery-twrp-3-3-1-siankatabg-t3934962
AEX: https://forum.xda-developers.com/Mi-9/development/rom-aospextended-v6-6-t3956100
Have you ever tried fastboot rom ? Now it's the only solution to recover your phone !
macgyverx86 said:
TLDR: I tried installing AEX rom and I bricked my mi9, getting it in a fastboot loop. Flashed a bunch of things and now I think my firmware is messed up. Help.
First I flashed TWRP, then I flashed the AEX rom and gapps, but phone got in bootloop, then I tried just flashing the ROM and it worked. After I flashed gaps it got into bootloop again.
Then I read the instructions from the AEX thread and I flash the recommended Firmware file (v9.6.13), and the flash failed.
I wiped everything, reflashed the ROM without gapps, and at restart the phone. Got stuck in fastboot.
Tried reinstalling TWRP with no success. Tried flashing MIUI with their flash tool but it didn't ended the flash procedure even after 20 minutes...
I tried to directly boot the recovery image (TWRP) and I was surprised that the phone booted in MIUI, but wifi wasn't working. Did not test anything else. Restarting the phone got me again in fastboot loop.
I tried again flashing with mi flash tool and this time was succesfull.
Then I tried to flash a MIUI eu ROM and got the phone again in fastboot loop. Flash was succesfull, but when restarting TWRP said that there is no OS installed.
I decided to give up and flash global MIUI 10.2.13 back.
But now my phone has some problems. Auto brightness doesn't work and video recording freezes the camera app when image stabilization is enabled.
So, is there a way to reflash 10.2.13 rom firmware using mi flash tool?
I suppose the first Firmware flash that was unsuccessful messed the firmware up...
Or how do I get my phone back to factory status...
I suppose v9.6.13 firmware is China developer and was an upgrade and that I should downgrade to 10.2.13 rom firmware.
Or flashing developer global will solve the problem? And how do I do that?
TWRP: https://forum.xda-developers.com/Mi-9/development/recovery-twrp-3-3-1-siankatabg-t3934962
AEX: https://forum.xda-developers.com/Mi-9/development/rom-aospextended-v6-6-t3956100
Click to expand...
Click to collapse
Hmm, so where are you at now!? Have you got twrp installed? and 10.2.13 but with issues, right? or are you on stock recovery?
Current status: I managed to flash fastboot global ROM in mi flash, and stock recovery.
But the firmware is messed up.
Camera doesn't work well. And from normal use I saw that Gyroscope, light sensor and compas aren't working at all...
Phone reboots itself and I can't unlock it because pattern isn-t recognized anymore, untill I reset it by long pressing the power button.
From CIT menu gyro, light sensor and compass are definitely not working.
Would flashing latest firmware from TWRP be a possible solution? My bootloader is still unlocked and I can flash TWRP.
Or should I format vendor partition first? And then flash firmware?
Fastboot flash did solved firmware problem.
macgyverx86 said:
Current status: I managed to flash fastboot global ROM in mi flash, and stock recovery.
But the firmware is messed up.
Camera doesn't work well. And from normal use I saw that Gyroscope, light sensor and compas aren't working at all...
Phone reboots itself and I can't unlock it because pattern isn-t recognized anymore, untill I reset it by long pressing the power button.
From CIT menu gyro, light sensor and compass are definitely not working.
Would flashing latest firmware from TWRP be a possible solution? My bootloader is still unlocked and I can flash TWRP.
Or should I format vendor partition first? And then flash firmware?
Fastboot flash did solved firmware problem.
Click to expand...
Click to collapse
To be honest I'm not entirely sure if it'll help, but, I'd put global stable flashable zip on otg, then I'd flash twrp again, boot to twrp using buttons not commands, wipe cache, dalvik, vendor, system, data, internal. Then format data, swiping with confirmation 'yes'. Then flash latest global again over the clean device from otg. You could try using mauronfrio's twrp 3.3.1-35 instead of the one you linked get it here. That's just what I'd try, can't say whether it'll help and no guarantees it'll fix anything... Let us know the outcome bud.
You can download the latest flashable rom from here
I can't see why ur sensors etc aren't working anymore, it's got to be all software related me thinks
Do not try to reboot after wipes, you'll have nothing installed
reg66 said:
... I'd put global stable flashable zip on otg, then I'd flash twrp again, boot to twrp using buttons not commands, wipe cache, dalvik, vendor, system, data, internal. Then format data, swiping with confirmation 'yes'. Then flash latest global again over the clean device from otg. ....
Click to expand...
Click to collapse
Correct me if I am wrong, but flashing a stock MIUI zip form twrp won't work.
Or you are saying that I should flash a xiaomi eu ROM?
Got another sugestion:
Someone said that there is the posibility that mi flash didn't flash persist partition and that I should try to force flash it.
Referred thread here: https://forum.xda-developers.com/re.../how-to-flash-persist-partiton-redmi-t3830310
Is this a possibility?
And shouldn't mi flash reflash everything?
macgyverx86 said:
Correct me if I am wrong, but flashing a stock MIUI zip form twrp won't work.
Or you are saying that I should flash a xiaomi eu ROM?
Click to expand...
Click to collapse
Hold tight bud, just checking. I remember doing that - and the stock rom flashes but you no longer have twrp, it flashes the whole system/vendor including recovery. But hang on 'cos I might be recalling my pocophone F1 for that proceedure. The reason I suggest to reflash twrp is simply to have better control over a fully clean wipe, before progressing to flash rom again. Like I say, hang on just checking...
---------- Post added at 08:49 PM ---------- Previous post was at 08:47 PM ----------
macgyverx86 said:
Got another sugestion:
Someone said that there is the posibility that mi flash didn't flash persist partition and that I should try to force flash it.
Referred thread here: https://forum.xda-developers.com/re.../how-to-flash-persist-partiton-redmi-t3830310
Is this a possibility?
And shouldn't mi flash reflash everything?
Click to expand...
Click to collapse
Yes, miflash should flash everything, but you say you started flashing other stuff when it all went wrong, so I'm really not sure what's happened to ur device. Hang on anyway, still checking on the flashable zip ..
---------- Post added at 09:06 PM ---------- Previous post was at 08:49 PM ----------
Nope, I think you're right, it was the poco I was getting muddled with - haven't had to do this in while (poco has flashable stock zips somewhere...). It is possible to do it with lazy flasher, but that may start getting messy again. Have you tried re-flashing fastboot? Can you wipe much at all in the stock recovery - again, I can't remember.
Failing that, yeah, I'd seriously consider flashing twrp and flashing mi-globe or eu rom. I prefer mi-globe (although currently using beast rom) over eu simply because you can customize it more on the website. Though, I wouldn't recommend pre-rooting it. Root after, if need be. Any way, we'll cross that bridge later... For now just try to re-flash
reg66 said:
Can you wipe much at all in the stock recovery - again, I can't remember.
Click to expand...
Click to collapse
Didn't get this.
Is it ok to format vendor partition? will it be recreated wen flashing again? using mi flash or from twrp?
macgyverx86 said:
Didn't get this.
Is it ok to format vendor partition? will it be recreated wen flashing again? using mi flash or from twrp?
Click to expand...
Click to collapse
I'm pretty sure you won't be able to wipe much in stock recovery, but just wipe what you can and try and re-flash fastboot. Don't flash twrp yet. You could try downloading again the fastboot file, in case of any corruption. Hopefully on the second flash all will be well. But that said, it should've been OK on the first flash :/ in theory
just flashed xiaomi eu rom and everything seems to work now. All sensors are working.
I had to disable signature check, and i got an mounting /system error -> got the message that is installed without changes... whatever that means
And now in TWRP, I think, my files are encrypted without enabling it.
Will try other roms later.
Thanks for the help.
macgyverx86 said:
just flashed xiaomi eu rom and everything seems to work now. All sensors are working.
I had to disable signature check, and i got an mounting /system error -> got the message that is installed without changes... whatever that means
And now in TWRP, I think, my files are encrypted without enabling it.
Will try other roms later.
Thanks for the help.
Click to expand...
Click to collapse
Glad you got it working, phew!
macgyverx86 said:
just flashed xiaomi eu rom and everything seems to work now. All sensors are working.
I had to disable signature check, and i got an mounting /system error -> got the message that is installed without changes... whatever that means
And now in TWRP, I think, my files are encrypted without enabling it.
Will try other roms later.
Thanks for the help.
Click to expand...
Click to collapse
Go the same problem as you,i tried Android Q beta rom and after reflashing stock fastboot rom with mi flash,the sensors and video not working,any solution?
gm007 said:
Go the same problem as you,i tried Android Q beta rom and after reflashing stock fastboot rom with mi flash,the sensors and video not working,any solution?
Click to expand...
Click to collapse
I just flashed Xiaomi EU rom, did a CIT test and all sensors were working.
Try that. I'm curious it it works for you.
macgyverx86 said:
I just flashed Xiaomi EU rom, did a CIT test and all sensors were working.
Try that. I'm curious it it works for you.
Click to expand...
Click to collapse
Yes it worked with eu rom,but i managed to fix it on stock global stable by flashing an old miui 10.2.6 fastboot rom,Than updated to the latest one 10.2.13
gm007 said:
Yes it worked with eu rom,but i managed to fix it on stock global stable by flashing an old miui 10.2.6 fastboot rom,Than updated to the latest one 10.2.13
Click to expand...
Click to collapse
So 10.2.13 fastboot image is to blame here.
macgyverx86 said:
So 10.2.13 fastboot image is to blame here.
Click to expand...
Click to collapse
Not sure maybe flashing eu rom first have fix it .
1. yesterday, i was using lasted PE 9.0 as my daily driver.
2. My phone got a little lag so I tried to reboot my phone but it couldn't so I hard reset it.
3. The phone got into bootloop
4. Access TWRP, it seems like my date got corrupted cause i lost all my data and internal storage show nothing
5. Tried format date but got error: Can not mount persist
6. Use MIFlash to flash the 9.6.20, 9.6.27 (global) and 9.5.9 (china) and the phone still got stuck in the MI + android logo screen.
P/s: as i checked the phone still got unlocked. i can still install TWRP in fastboot but flash any rom got error 7
Update: every TWRP i tried got bootloop and made me lost persist except this https://drive.google.com/open?id=1HiQsS5bZOKA4AV89S9CieQfphzCRSYcj
I think this is the best for fixing any errors in Android 9. After fixing u can install another TWRP
Now using PE, it seems i cant flash any MIUI
That wasn't a brick/ It was a encryption issue
Go to Wipe, Format Data, type yes, reboot to recovery, wipe system and flash any rom you want!
Glad you fixed, miui, is **** anyways, who needs it lop
huytoan9882 said:
1. yesterday, i was using lasted PE 9.0 as my daily driver.
2. My phone got a little lag so I tried to reboot my phone but it couldn't so I hard reset it.
3. The phone got into bootloop
4. Access TWRP, it seems like my date got corrupted cause i lost all my data and internal storage show nothing
5. Tried format date but got error: Can not mount persist
6. Use MIFlash to flash the 9.6.20, 9.6.27 (global) and 9.5.9 (china) and the phone still got stuck in the MI + android logo screen.
P/s: as i checked the phone still got unlocked. i can still install TWRP in fastboot but flash any rom got error 7
Update: every TWRP i tried got bootloop and made me lost persist except this
I think this is the best for fixing any errors in Android 9. After fixing u can install another TWRP
Now using PE, it seems i cant flash any MIUI
Click to expand...
Click to collapse
You can try changing all partition to f2fs (or any other format) and then changing back to ext4.
It worked for me...
Aronfjil said:
You can try changing all partition to f2fs (or any other format) and then changing back to ext4.
It worked for me...
Click to expand...
Click to collapse
Can you tell me how?
Now i just flash the twrp then flash persist again. Then everything is fine
huytoan9882 said:
Can you tell me how?
Now i just flash the twrp then flash persist again. Then everything is fine
Click to expand...
Click to collapse
Boot in to twrp Wipe/advanced wipe/select system + cache + data(one at a time) then press change or repair system file and select f2fs and continue as I mentioned before.
Updates please....
Hi,
I bought a new phone and thought I would get in to custom ROMs again. Mostly to get rid of bloatware. However, after following multiple guides I'm still no where closer to achieving my goals. The phone is a MI 9.
I found there's a lot of different steps depending on guide but most of the once I've tried does the following:
* Unlock bootloader, working
* Installing twrp via fastboot, working
* Deleting data in twrp, working
* Transfering a rom.zip file (depending on rom), working via usb cable
* Some guides recommends to install disable force Encryption via another zip file transferred from the computer, however, that seems to not be necessary, tried i few times
* Installing rom via twrp, seems to work
* In some guides you then need to remove cache, working
* Rebooting from twrp, working
After these steps I find myself in one of three different cases,
1. Phone is stuck in fastboot, have to reflash it with MIflash and global MIUI rom to get phone to work again
2. Phone in boot loop, logo shows up, phone waits for awhile, phone reboots, logo shows up
3. Phone boots up, logo is shown, phone reboots into twrp
I've also tried both XiaoMiTool and XiaoMiTool V2,
XiaoMiTool seems to write the global ROM to the phone whatever I choose (Have tried Xiaomi.eu and LineageOS 17)
XiaoMiTool V2, fails in second to last step, it wants to remove some cache before the installation in twrp is done.
Things I've not tried:
* Moving file to twrp with adb instead, should not make a difference
* Installing magisk
Now, I'm a bit afraid my phone will get hard bricked, have reinstalled the OS 20 times the last day to test different approaches and steps. Nothing seem to work. Does anyone have a proven method working in 2020?
Another way to go might be to just get rid of the commercials, run a different launcher to get app list and get rid of the bloatware. This is not really what I want but I can live with it.
As you can hear I'm about to just throw in the towel and give up. But I've heard a lot good about the xda forums so I thought it might be worth a try even though I do understand if no one has time or energy to help out a newbie.
Help please!
Edit: I do realize I've accidentally put this under Guides and not Q&A. I find no way of moving it nor deleting the thread so I guess some moderator will have to come help. Sorry for this.
Do you use latest TWRP for Mi9? TWRP from Mauronofrio works fine for me.
When you say "Deleting data in twrp", does this mean you did Format Data (confirm by typing "yes")? Or just wipe?
Poslano z mojega MI 9 z uporabo Tapatalk
mxxt01 is right. You have to format the data partition or else you will run into a bootloop.
I followed the guide here but I did not flash magisk since I don't need root.
Basically what I did was;
1. Unlock bootloader
2. Reboot to load the OS but skip the initial setup
3. Reboot to fastboot/bootloader
4. Flash TWRP (use the latest beta from Mauronofrio)
5. Immediatly press Vol Up + Power button to boot TWRP
6. Sideload the firmware to /tmp/
7. Format the data partition and type yes to continue
8. Factory reset
9. Flash firmware from within TWRP
10. Factory reset again (you can skip this if you don't want to)
11. Reboot
And that is how I did it.
mxxt01 said:
Do you use latest TWRP for Mi9? TWRP from Mauronofrio works fine for me.
When you say "Deleting data in twrp", does this mean you did Format Data (confirm by typing "yes")? Or just wipe?
Poslano z mojega MI 9 z uporabo Tapatalk
Click to expand...
Click to collapse
I have tried both Formatting data, this generally makes all folders have gibberish names and by going to advanced wipe, choosing data, some guides also wants you to delete Dalvik, Cache and System. I have tried both in the same go and one or the other. Does not seem to make a difference. But from the response below I get that it's formatting the data and typing yes that is the way to go(?)
TWRP version 3.3.1-0
sangbuana said:
mxxt01 is right. You have to format the data partition or else you will run into a bootloop.
I followed the guide here but I did not flash magisk since I don't need root.
Basically what I did was;
1. Unlock bootloader
2. Reboot to load the OS but skip the initial setup
3. Reboot to fastboot/bootloader
4. Flash TWRP (use the latest beta from Mauronofrio)
5. Immediatly press Vol Up + Power button to boot TWRP
6. Sideload the firmware to /tmp/
7. Format the data partition and type yes to continue
8. Factory reset
9. Flash firmware from within TWRP
10. Factory reset again (you can skip this if you don't want to)
11. Reboot
And that is how I did it.
Click to expand...
Click to collapse
Could you describe step 6 in more detail please?
This is what I get if I try sideloading my phone:
adb push xiaomi.eu_multi_MI9_V11.0.5.0.QFACNXM_v11-10.zip /tmp/
adb server is out of date. killing...
* daemon started successfully *
I guess it's important to not get the firmware in the SD-card folder since that will be wiped if I format the data, this might be where I fail.
Step 6 is to type adb push rom.zip /tmp/
I renamed the zip file to rom.zip so that I don't typo when typing.
Sent from my MI 9 using Tapatalk
In any case you should flash a current (11.0.6.0 or younger) fastboot ROM (.tgz extention). Recovery ROMs (.zip extention) don't reset the phone as deep as fastboot ROMs do.
After that you'd best flash vbmeta.img before TWRP, see #1 for more details.
Cheers
Toscha
From personal experience of using xiaomi.eu's ROM, I never did install vbmeta.img or dmverity, since that particular rom is based on the official beta Chinese MIUI ROMs, and the latest TWRP from Mauronofrio supports decryption. Not sure about other ROMs though.
Just to be safe, just download the stock fastboot ROM as a backup just in case anything goes wrong. Always remember to NOT lock your bootloader when flashing back to stock, in case your persist partition gets corrupted, you can flash it to recover.
ZevSwe said:
I have tried both Formatting data, this generally makes all folders have gibberish names and by going to advanced wipe, choosing data, some guides also wants you to delete Dalvik, Cache and System. I have tried both in the same go and one or the other. Does not seem to make a difference. But from the response below I get that it's formatting the data and typing yes that is the way to go(?)
TWRP version 3.3.1-0
Could you describe step 6 in more detail please?
This is what I get if I try sideloading my phone:
adb push xiaomi.eu_multi_MI9_V11.0.5.0.QFACNXM_v11-10.zip /tmp/
adb server is out of date. killing...
* daemon started successfully *
I guess it's important to not get the firmware in the SD-card folder since that will be wiped if I format the data, this might be where I fail.
Click to expand...
Click to collapse
Like written by toscha42 you should flash the latest fastboot stock rom (tgz) for your phone first, as after all the attempts you have made your phone is probably kind of ****ed up... Do not lock bootloader.
What I do and it works for me, starting from stock ROM.
1. Unlock bootloader (you already done that)
2. Flash in fastboot latest TWRP for your device (I use Mauronofrio)
3. After flashing disconnect the phone and push VOLUME UP + POWER to enter from fastboot directly to TWRP recovery
4. Format data with yes
5. Reboot to recovery
6. Flash xiaomi.eu custom rom for your device with USB OTG (usb otg is the easiest way I guess as you don't need to move the rom to internal storage)
7. Reboot to recovery
8. Wipe cache and dalvik cache
8. Reboot to system
And that's all.
Poslano z mojega MI 9 z uporabo Tapatalk
toscha42 said:
In any case you should flash a current (11.0.6.0 or younger) fastboot ROM (.tgz extention). Recovery ROMs (.zip extention) don't reset the phone as deep as fastboot ROMs do.
After that you'd best flash vbmeta.img before TWRP, see #1 for more details.
Cheers
Toscha
Click to expand...
Click to collapse
Can't seem to find any fastboot ROMS, neither of xiaomi.eu or LineageOs 17. Where can I find this? https://xiaomi.eu/community/threads/20-1-16.54300/
If I understood correctly vbmeta.img unlockes secure boot. Not sure why that is needed or what problems it might create. Did some googling but found nothing. What is this used for? If it's important, why is it not in any guides I found?
ZevSwe said:
Can't seem to find any fastboot ROMS, neither of xiaomi.eu or LineageOs 17. Where can I find this? https://xiaomi.eu/community/threads/20-1-16.54300/
If I understood correctly vbmeta.img unlockes secure boot. Not sure why that is needed or what problems it might create. Did some googling but found nothing. What is this used for? If it's important, why is it not in any guides I found?
Click to expand...
Click to collapse
Fastboot STOCK Xiaomi ROM.
To be flashed with MiFlash. Do not lock bootloader.
http://c.mi.com/oc/miuidownload/detail?device=1700361
Poslano z mojega MI 9 z uporabo Tapatalk
Fastoot ROMs are only available for official MIUI ROMs and has tgz as their filename extensions. They are flashable only using Mi Flash tools or equivalent. Custom ROMs has zip and they are flashable using recovery.
Correct me if I'm wrong, vbmeta.img is for verified boot. I was running on official MIUI ROM and I wanted to have TWRP recovery, but stock recovery would come back after every reboot. So I flashed a modified version of vbmeta.img available on the web, to disable verified boot, and TWRP would persist in the recovery partition. Have a read on Verified Boot here.
mxxt01 said:
Fastboot STOCK Xiaomi ROM.
To be flashed with MiFlash. Do not lock bootloader.
http://c.mi.com/oc/miuidownload/detail?device=1700361
Poslano z mojega MI 9 z uporabo Tapatalk
Click to expand...
Click to collapse
Hmm okay, but the phone is already working with the stock ROM, my whole idea is to switch to something else. What do you mean with do not lock bootloader?
sangbuana said:
Fastoot ROMs are only available for official MIUI ROMs and has tgz as their filename extensions. They are flashable only using Mi Flash tools or equivalent. Custom ROMs has zip and they are flashable using recovery.
Correct me if I'm wrong, vbmeta.img is for verified boot. I was running on official MIUI ROM and I wanted to have TWRP recovery, but stock recovery would come back after every reboot. So I flashed a modified version of vbmeta.img available on the web, to disable verified boot, and TWRP would persist in the recovery partition. Have a read on Verified Boot here.
Click to expand...
Click to collapse
Right, well I wish to switch to another ROM so installing MIUI Global ROm will not help.
I'm able to install TWRP without touching verfiedboot at all and get it to work even after reboot so that is not a problem. If that is what verifiedboot does I believe I can skip that?
ZevSwe said:
Hmm okay, but the phone is already working with the stock ROM, my whole idea is to switch to something else. What do you mean with do not lock bootloader?
Click to expand...
Click to collapse
than try once again by following my steps in post #8
You can skip flashing vbmeta and just follow mxxt01's steps.
Sent from my MI 9 using Tapatalk
sangbuana said:
You can skip flashing vbmeta and just follow mxxt01's steps.
Sent from my MI 9 using Tapatalk
Click to expand...
Click to collapse
That seems to have made the trick! Thanks so much!
I've been following this thread because I was having the same problems as ZevSwe, multiple attempts at installing roms with no success. I've been using phones/tablets with custom roms for years so I have some experience but not with this device.
I'll be trying the steps in post #8 later today but I have a question about twrp that's buggin me. I have been taking full twrp backups to a usb stick before installing and just reinstalling when the custom rom didn't work but the last few times the reinstall failed at about 98% complete and I've had to reinstall stock from scratch.
Any idea why a twrp backup would fail on reinstall? Is there something I could have inadvertantly done to cause this issue? Playing with roms is fun and easy when you've got a twrp backup to fall back on but a pain in the $#^ when it doesn't restore. Any thoughts would be appreciated before I give it another go.
thecdn said:
I've been following this thread because I was having the same problems as ZevSwe, multiple attempts at installing roms with no success. I've been using phones/tablets with custom roms for years so I have some experience but not with this device.
I'll be trying the steps in post #8 later today but I have a question about twrp that's buggin me. I have been taking full twrp backups to a usb stick before installing and just reinstalling when the custom rom didn't work but the last few times the reinstall failed at about 98% complete and I've had to reinstall stock from scratch.
Any idea why a twrp backup would fail on reinstall? Is there something I could have inadvertantly done to cause this issue? Playing with roms is fun and easy when you've got a twrp backup to fall back on but a pain in the $#^ when it doesn't restore. Any thoughts would be appreciated before I give it another go.
Click to expand...
Click to collapse
Since you noted that you have been doing a backup to a USB stick, it could be the USB stick is failing.
Honestly, all the installation guides for custom Roms i came across on XDA in the recent years are complete garbage. It fills like copy pasted from a guide that has been copypasted from a copypasted thread which has been copypasted and never worked.
For me, this guide works just fine. I just had to find the files for my Mi 9 instead of the k20 Pro. I would upload them for you but my upload speed is garbage.
https://www.youtube.com/watch?v=w_u_w6SrTDY&t=249s
I have flashed a lot of ROMs custom and official, fastboot and recovery. Never had any problems, the steps is here in thread.
Just remember 2 thing:
1. If you have ROM which using encryption, you must format data, because wipe will not remove encryption and you will see gibberish names
2. If you wipe system (which is mean less, because every ROM flash will do that, when you flash it, but many people insist in wiping it) then you must flash a ROM without reboot or you will stuck in fastboot and only option to repair is to flash official fastboot ROM (Non official fastboot ROMs, don't exist).
I installed he wrong ROM on my Remi k20 pro and then decided to go andinstall the correct one but it kept giving me an error so in TWRP in the wipe I pressed advanced wipe and selected each box thinking it was the right thing to do and now I can't recovery flash twrp, it just brings up the fastboot screen. Any one know what I can do to load TWRP back on to it?
Thanks.
Bye.
RBBE said:
I installed he wrong ROM on my Remi k20 pro and then decided to go andinstall the correct one but it kept giving me an error so in TWRP in the wipe I pressed advanced wipe and selected each box thinking it was the right thing to do and now I can't recovery flash twrp, it just brings up the fastboot screen. Any one know what I can do to load TWRP back on to it?
Thanks.
Bye.
Click to expand...
Click to collapse
You'll have to flash correct full fastboot ROM with flashtool mate. Remember to uncheck CLEAN ALL AND LOCK option
Sent from my Redmi K20 Pro using Tapatalk
ishaqtkr said:
You'll have to flash correct full fastboot ROM with flashtool mate. Remember to uncheck CLEAN ALL AND LOCK option
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Can you please link me where I could download the ROM.
Thanks
Bye.
Here: https://xiaomifirmwareupdater.com/miui/
Search for your phone with K20 Pro or Mi 9T pro and download with the region you have whichever you have although it doesn't make a difference as long as you keep bootloader open. Only difference is Call app and NFC.
AGAIN: UNCHECK THE CLEAN ALL AND LOCK OPTION BY CLICKING ON "CLEAN ALL" ONLY.
If you don't know how to flash using flashtool or setting up flashtool search for guides there's plenty.
Sent from my Redmi K20 Pro using Tapatalk
ishaqtkr said:
Here: https://xiaomifirmwareupdater.com/miui/
Search for your phone with K20 Pro or Mi 9T pro and download with the region you have whichever you have although it doesn't make a difference as long as you keep bootloader open. Only difference is Call app and NFC.
AGAIN: UNCHECK THE CLEAN ALL AND LOCK OPTION BY CLICKING ON "CLEAN ALL" ONLY.
If you don't know how to flash using flashtool or setting up flashtool search for guides there's plenty.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
I get an error everytime I try to flash the phone.
RBBE said:
I get an error everytime I try to flash the phone.
Click to expand...
Click to collapse
well what's the error
RBBE said:
I get an error everytime I try to flash the phone.
Click to expand...
Click to collapse
Get the fastboot ROM from here
https://xiaomifirmwareupdater.com/supported/miui/
Choose the fastboot ROM for the phone you have (Chinese, Indian, European, Global)
Use this guide to flash it
https://c.mi.com/oc/miuidownload/detail?guide=2
View the page in desktop mode if viewing on a phone.
In step 5 change the flash option to 'clean all' before hitting flash.
You normally only need to wipe data, cache and dalvik (This is what factory reset wipes in TWRP) at most. It's very rare you'll need to wipe anything more. Don't wipe anything else in TWRP, unless you know you're about to flash something that will replace what you wipe. If you are flashing something and you don't know all that it will install, don't wipe anything more than a factory reset.
It's ok, just flash the vb_meta file. reflash twrp and you'll be in recovery again. flash vendor and reboot recovery.
The problem arose cause you wiped the vendor. Next time don't do that. (unless you are using oss rom)
Guide: https://forum.xda-developers.com/k20-pro/how-to/simple-beginners-guide-to-raphaelin-t4020543
follow the STUCK IN FASTBOOT FIX
I'm assuming your error is error 7?
just follow ERROR 7 FIX and you'll be fine
TLDR: reboot without vendor caused issue. Use ofox 10.6
Hello! Just created an account in this forum to seek help because this is driving me nuts.
I have a Xiaomi Redmi Note 9 (Merlin) which has no system (Android), but I still can access fastboot and recovery menu, so I went ahead and unlocked the bootloader and flashed MIUI without any issue. To my surprise, when I booted the phone back up, it was like I didn't do anything as it still bootlooped, it didn't even show the MIUI logo, so I tried again; still nothing.
So, I tried the following:
- I followed the guide in this forum for hard-bricked Note 9 phones (https://forum.xda-developers.com/t/...icked-redmi-note-9-merlin-hard-brick.4347025/), and I can tell the firmware flashes because the starting menu and the fastboot logo changed from the rabbit to FASTBOOT in orange letters, but still no system.
- I flashed stock firmware, but still no system.
- I flashed the MIUI version that the phone came with through fastboot, but still no system
- I tried to flash the newest version of MIUI the phone came with through TWRP using the recovery version, but still no system (and when I try to reboot, TWRP says there is no system)
- I tried installing Pixel Experience to see if MIUI was the issue but, still no system. The phone just keeps bootlooping endlessly.
- I tried running https://github.com/Zackptg5/Disable_Dm-Verity_ForceEncrypt to see if the encryption was the problem, but no progress.
I would appreciate any help to at least have my phone working, even if it's not with MIUI but with a custom ROM. At this point I don't care anymore, just want a useable phone.
Thank you.
Hi. Just flash the whole stock MIUI ROM of your choice and then
In TWRP you must format /data (you did first make a backup of your personal data right?)
Then phone should boot again.
I hope this helps. Good luck!
lebigmac said:
Hi. Just flash the whole stock MIUI ROM of your choice and then
In TWRP you must format /data
I hope this helps. Good luck!
Click to expand...
Click to collapse
I've tried that a couple of times but it's like I didn't do anything, when I reboot I still get no system
bump
bump - really desperate about this matter
I can't believe reflashing stock ROM + formatting the /data partition didn't fix your issue
You are using the flash_all.sh script that comes with the stock MIUI firmware right?
well your only option it seems is to check the bootloop log and then try to find out the reason for bootloop that way. Maybe somewhere inside TWRP you can find some kind of bootloop log? Good luck!
lebigmac said:
I can't believe reflashing stock ROM + formatting the /data partition didn't fix your issue
You are using the flash_all.sh script that comes with the stock MIUI firmware right?
well your only option it seems is to check the bootloop log and then try to find out the reason for bootloop that way. Maybe somewhere inside TWRP you can find some kind of bootloop log? Good luck!
Click to expand...
Click to collapse
Yeah, I even tried with other PCs to see if that was the issue. Will try looking in the logs. Thank you!