Database Develop

help install back 9.1.10 stable from xiaomi eu beta latest wia twrp

hi friend i have xiaomi redmi 4x i have unlocked bootloader OK
I have install twrp 3110 OK
when i install this xiaomi.eu rom latest beta everything is OK
when i want install back latest stable global 9.110 by xiaomi i download normal recovery rom from xiaomi site and put it on phone storage then i normal go twrp wipe (factory reset) install 9110 install is ok
when i click reboot system i see on boot only mi logo and no this .... powered by android
also same when i choose in twrp wife all data system etc expect storage where is this downloaded rom.
could any explain me why it stuck at boot if installation via twrp is ok ?

but when i install back this xiaomi.eu rom boot works OK

tubabuyukustun said:
hi friend ....
could any explain me why it stuck at boot if installation via twrp is ok ?
Click to expand...
Click to collapse
Hello, this happens because official MIUI boot.img verifies if recovery.img is also official/original.
You have 2 options to resolve the boot problem:
1. If you want to keep TWRP then modify boot.img... http://en.miui.com/thread-249666-1-1.html (with R4X image of course)
and flash it from TWRP or fastboot: fastboot flash boot boot.img
2. If you want original recovery, get "recovery.img" from the exact TGZ image as your MIUI ZIP
and flash it: fastboot flash recovery recovery.img
:good:

Clearing up TWRP ambiguity versions + rooting MIUI pie

There is confusion over which recoveries to install for Redmi 6 (cereus).
Failure to install the correct TWRP will result in a hard brick with no chance of restoring the device without an authorised account or going to a Mi Service Centre.
If you are currently on the MIUI Oreo ROM:
You may ONLY use TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
The recovery by either TWRP or LR.Team is both ok.
If you are on the PIE rom:
You MUST use TWRP 3.3.1 or OrangeFox Recovery. R10.0-2 nocrypt Pie is confirmed to be working by me.
To root MIUI pie, follow the instructions in this post from 4PDA. This is because you will be unable to decrypt data.
You need to create an account to download the patched boot.img. You can either create one yourself or ask me or someone else to PM you with the boot.img. I will not attach it to this thread because it is not my work. The files have now been attached. See post below.
All credits go towards the respective recovery authors and 4pda

OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs

I did something wrong just don't know what
I tried with OrangeFox and when rebooted in recovery the phone would not turn on and just vibrates.
I was lucky because I just needed to open and remove the battery to get the phone back up.

So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
0) Download patched boot image from OP
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> Flash patched boot.img -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
would this be the correct procedure?
cheers

snoerme said:
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
cheers
Click to expand...
Click to collapse
?????????????????????
Why don't you skip steps 1-3 and just use XiaoMi Flash to install 10.4.4.0 via Fastboot by 'saving user data', then follow the instructions here? XiaoMiFlash will overwrite your recovery with the default so there is no risk of a brick. Then Flash TWRP Pie, flash boot img, flash magisk.
As I have said, you will brick your device. If you have TWRP Oreo, and then you install MIUI Pie, you will brick your device. You are doing EXACTLY what I told you not to do!

It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
edit: do you know if the latest magisk stable 20.0 would also work?

snoerme said:
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
Click to expand...
Click to collapse
I'm not sure - I have never flashed any MIUI ROM in TWRP. It seems normal though - the updaterscript probably tells TWRP to overwrite itself.
https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847 It's a bit complicated

This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot and enjoy

Hi, currently I'm on stable China mui v10.4.3.0. Do you have boot.img on that v10.4.3.0. Currently link only provide boot.img for v10.4.2.0 for the china version. If no how do I get those, can I just backup them from twrp, Then create patched boot img with those backup boot? Thanks

Che0063 said:
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
Click to expand...
Click to collapse
Thanx for boot_10.4.4.0_R6_mgsk_193.img :good:
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
ThanX ! ! !
This work for me :good:
EDIT:
The flashlight and the camera does not work after flash the boot boot_10.4.4.0_R6_mgsk_193.img [emoji848]
Does anyone else have a similar problem?
View attachment 4862683

I have the camera and flashlight problem too. Any fix?

Unfortunately, I didn't find any solution.
Currently, my phone does not start, has a black screen and vibrates all the time. I can't run it in any way
EDIT:
Hi.
I was able to bring the phone to life. Get instructions on how to get to the battery https://www.youtube.com/watch?v=L9FH88b16bc https://www.youtube.com/watch?v=fAflA4UKLLY. In orangeFox recovery I checked the flashlight, it works.

That makes us two. My phone is unusable at the moment. I thought the root was responsible for the camera bugs, I uninstalled magisk, the bug was still there. I tried to reinstall MIUI 10.4.4 ang got an error. I've wiped everything including vendor and system.

I clean dalvik and cache and for now the phone is working even, after flash the patch boot.img

ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
Hello this is the steps i did but when rebooting to recovery i end up on blackcreen or mai i say powered off screen with the device unable to boot to recovery,any ideas what i did wrongly?

It seems there is something wrong with that boot patch. I followed a procedure on youtube and my phone is succesfully rooted without any bug

@ambyy
what guide did you use on YouTube?
Wysłane z mojego Redmi 6 przy użyciu Tapatalka

https://www.youtube.com/watch?v=I_4Zmco9R78&t=25s

Hard brick caused by flashing wrong TWRP is indeed able to get solved with unplugging the battery.

Miui v11 boot.img please

MIUI 12 Root

Hi, everyone, I'm on MINE 12.0.1 Stable Global. The bootloader is unlocked. Is it possible to proceed to root like on MUI 11? I install TWRP recovery and then Magisk? Or is there something different to do? Thank you in advance...

If you install TWRP, you need to flash DFE afterwards to boot.
After a successful boot, reboot to recovery and flash magisk.
Mi 9T Pro ll Tapatalk

kibria.mgk said:
If you install TWRP, you need to flash DFE afterwards to boot.
After a successful boot, reboot to recovery and flash magisk.
What is DFE?
Click to expand...
Click to collapse

Ferb1151 said:
What is DFE?
Click to expand...
Click to collapse
Disable Force Encryption
Mi 9T Pro ll Tapatalk

kibria.mgk said:
Disable Force Encryption
Where can I found it? Do you habe a guide or something like that?
Click to expand...
Click to collapse

Ferb1151 said:
Where can I found it? Do you habe a guide or something like that?
Click to expand...
Click to collapse
Got it from xeu telegram channel. To know more, join there. Also, flash this at your own risk.
Couldn't upload directly, here's gdrive mirror.
https://drive.google.com/file/d/1NctBFGwuT3X766mXGFTUxZeSZ5ipLFC2/view?usp=drivesdk

Procedure
The procedure is very simple. DFE or OFOX are NOT required. I flashed TWRP on an encrypted device and boots as expected.
1. Install ADB DRIVERS and download PLATFORM-TOOLS and TWRP. Also download Magisk and move it to the phone.
2. In Developer Options Enable USB Debugging, then reboot to fastboot (Vol Down + PWR Button).
3. Connect the device to PC. Extract the platform tools folder and in it press Shift+Left Click and open a powershell window. Type
Code:
fastboot flash recovery twrp-3.4.0-1-raphael.img
4. Reboot directly to TWRP (Vol Up + PWR Button).
5. From there flash magisk, and reboot to system.
6. Come back here and hit that thanks button. :good:

No need of flashing DFE. After installing TWRP boot directly into TWRP and flash latest Magisk. Then you can boot normally.

Ok, than is like on MiUI 11, right? Thanks!!!

Sorry to barge in, but will this also work with k20 pro premium?

demam said:
Sorry to barge in, but will this also work with k20 pro premium?
Click to expand...
Click to collapse
This method is unchanged since release of the 9T PRo/K20 Pro of premium.
Just the TWRP and Orangefox versions improved due to updating by the dev's.

trelokeeper said:
The procedure is very simple. DFE or OFOX are NOT required. I flashed TWRP on an encrypted device and boots as expected.
1. Install ADB DRIVERS and download PLATFORM-TOOLS and TWRP. Also download Magisk and move it to the phone.
2. In Developer Options Enable USB Debugging, then reboot to fastboot (Vol Down + PWR Button).
3. Connect the device to PC. Extract the platform tools folder and in it press Shift+Left Click and open a powershell window. Type
Code:
fastboot flash recovery twrp-3.4.0-1-raphael.img
4. Reboot directly to TWRP (Vol Up + PWR Button).
5. From there flash magisk, and reboot to system.
6. Come back here and hit that thanks button. :good:
Click to expand...
Click to collapse
Today I've followed this steps on my xiaomi mi 9t pro with miui version 12.0.3.0. I was able to unblock my boot loader and to install TWRP. Then I was able to install magick but when I reboot the system, twrp start again and again.
Do you have any idea?

Can't get redmi 7a 12.0.1 to root neither with or w/out decryption

How To Guide Install TWRP for Xiaomi 11T Pro

Perform this at your own risk. You might LOSE all data on your phone.
( I'm not responsible for any damage to your device )
//
Update: OrangeFox Recovery Project for Xiaomi 11T Pro (vili) with the same installation instructions.
Caution: this recovery is intended for use with MIUI vendors ONLY, even having the flashing capability of MiLahaina based system, do not try to boot it on MiLahaina ROMs, as the builds aren't compatible.
Bugs as for now:
- Vibrator
- MTP (adb works fine)
https://sourceforge.net/projects/chemuski1-stuff/files/Xiaomi 11T Pro/Recovery (MIUI vendor)/OrangeFox-Unofficial-vili.img/download
//
This guide will walk you through the process of installing TWRP on your Xiaomi 11T Pro.
READ THIS FIRST:
You may brick your device if you don't know what you are doing.
This might ERASE ALL YOUR DATA so do a BACKUP encase.
Your bootloader will be unlocked.
Prerequisites:
The bootloader must be unlocked. Click here for a tutorial.
Install ADB and Fastboot Drivers from here (Select the latest) --> https://androidmtk.com/download-minimal-adb-and-fastboot-tool )
Install drivers for Xiaomi 11T Pro --> https://droidfilehost.com/download/download-xiaomi-usb-driver-for-windows (For Windows Only!)
Download the TWRP Image for Xiaomi 11T Pro --> https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/vili/
Installing TWRP:
Reboot the phone to fastboot (Power + Vol Down)
Connect the phone to the computer using an USB cable (Preferred to use original cable that came with the phone)
Extract the fastboot files and open CMD/Terminal there.
Paste the twrp.img in the same folder.
Type' fastboot boot twrp.img' without the apostrophes.
The phone will reboot in TWRP after that go to Advanced > Flash Current TWRP.
Done!
Note: Change twrp.img with the original file name example twrp-3.7-xxx.img.
Orignal Thread: https://forum.xda-developers.com/t/how-to-install-twrp-on-xiaomi-11t-pro.4350425/
Edit: The Recovery is now updated by skkk and is working on Android 12 without any problems just download it from the update link above

Good job!!

Thank youuu!
Edit: But everytime I open TWRP I need to put my pattern, why is that?

oh thanks, so i can flash EU rom through TWRP ???

Where is this twrp from, who made it. Information needed. Please share.

GeeyahnOfficial said:
Thank youuu!
Edit: But everytime I open TWRP I need to put my pattern, why is that?
Click to expand...
Click to collapse
Not 100% sure but it's probably because your device is encrypted which is the default behavior of miui when you setup your lockscreen method.
skcapk said:
oh thanks, so i can flash EU rom through TWRP ???
Click to expand...
Click to collapse
Not yet, we still don't have recovery rom yet, the current eu rom is for fastboot.

sushuguru said:
Not 100% sure but it's probably because your device is encrypted which is the default behavior of miui when you setup your lockscreen method.
Click to expand...
Click to collapse
How can I remove it? When I put my password it decrypt tho, should I keep it like that (keep putting password whenever I open twrp) or remove it? Which is better?

GeeyahnOfficial said:
How can I remove it? When I put my password it decrypt tho, should I keep it like that (keep putting password whenever I open twrp) or remove it? Which is better?
Click to expand...
Click to collapse
It is better to enter the password every time as this will enhance your security in case you lose your phone they won't find the password is decrypted therefore they can't access your data.
But still there is another way they might access your data and that if your bootloader is unlocked usually the best way to protect yourself is to leave the password in twrp and lock your bootloader.

Flashed Twrp Running smooth on Slot A Installing Magisk is making issue
Suggest how to fix this

djkrish5610 said:
Flashed Twrp Running smooth on Slot A Installing Magisk is making issue
Suggest how to fix this
Click to expand...
Click to collapse
What issues? Could you be more specific? I have both and I don't have any issues...

i have Tried as below:
Option1: Tried to boot Twrp after that go to Advanced > Flash Current TWRP > Done Magisk was missing so flashed Magisk from Twrp.
Not booting on system
Option2: Flashed TWRP on SLOT A & SLOT B and now messed up

This unofficial version of TWRP + Magisk root seems to cause network problems for me as the mobile connection dropped from 4G(LTE) to 2G(EDGE).
Using Magisk root without TWRP works like a charm.
Anyone else facing this issue?

I flashed the latest magisk on this TWRP and no problem facing.

TheRomFan said:
Perform this at your own risk. You might LOSE all data on your phone.
( I'm not responsible for any damage to your device )
This guide will walk you through the process of installing TWRP on your Xiaomi 11T Pro.
READ THIS FIRST:
You may brick your device if you don't know what you are doing.
This might ERASE ALL YOUR DATA so do a BACKUP encase.
Your bootloader will be unlocked.
Prerequisites:
The bootloader must be unlocked. Click here for a tutorial.
Install ADB and Fastboot Drivers from here (Select the latest) --> https://androidmtk.com/download-minimal-adb-and-fastboot-tool )
Install drivers for Xiaomi 11T Pro --> https://droidfilehost.com/download/download-xiaomi-usb-driver-for-windows (For Windows Only!)
Download the TWRP Image for Xiaomi 11T Pro --> https://sourceforge.net/projects/xi....6.0_11-0_LOCAL-20220203-01-vili.img/download.
Installing TWRP:
Reboot the phone to fastboot (Power + Vol Down)
Connect the phone to the computer using an USB cable (Preferred to use original cable that came with the phone)
Extract the fastboot files and open CMD/Terminal there.
Paste the twrp.img in the same folder.
Type' fastboot boot twrp.img' without the apostrophes.
The phone will reboot in TWRP after that go to Advanced > Flash Current TWRP.
Done!
Note: If you were using magisk, reflash it now
Orignal Thread: https://forum.xda-developers.com/t/how-to-install-twrp-on-xiaomi-11t-pro.4350425/
Click to expand...
Click to collapse
Greetings.
Amazing, however, I want to know whether this works for the Xiaomi 11T or not.

Jin_Vickaizer said:
Greetings.
Amazing, however, I want to know whether this works for the Xiaomi 11T or not.
Click to expand...
Click to collapse
It won't as it might brick your phone so make sure you install this in 11T Pro (vili) not 11T (agate)

Good morning, I use it with the 11t Pro, and no problem! great everything.
But now they updated to Android 12 and Miui 13, and it doesn't work anymore...
The developer will update the recovery to work on android 12??
First of all, thank you very much for the hard work you do.

Deleted

Hello,
So i flashed TWRP and it all worked fine but now I can't install any stock rom anymore. I always get the "Antirollback check error".

zLauch666 said:
Hello,
So i flashed TWRP and it all worked fine but now I can't install any stock rom anymore. I always get the "Antirollback check error".
Click to expand...
Click to collapse
Currently on which version of rom?
And you want to install?

NOSS8 said:
Currently on which version of rom?
And you want to install?
Click to expand...
Click to collapse
i got help from the discord server and here's what i did:
> launched TWRP > Advanced > ADB Sideload
> installed the newest platform-tools on my PC
> then flashed a recovery rom with version 12.5.10
>> NOTE: if it crashed at 47% - 49% that's fine, it's an ADB bug so 47 - 49 means 100%
> rebooted to system
after all that my devices was working again.

Question Where do I find TWRP for the Redmi Note 11 and how do I flash it?

As the title says. I managed to unlock the bootloader but now I need to install TWRP to install magisk, right? How do I get around doing that? There are some shady downloads on the internet but on twrp.me there is nothing for the phone. What do I do? Thanks in advance!

the device does not have official TWRP, the others available on telegram group do work fine

Thank you, but what telegram group? Could you forward me a link to it or something?

GeoS__ said:
Thank you, but what telegram group? Could you forward me a link to it or something?
Click to expand...
Click to collapse
not found | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com

SubwayChamp said:
not found | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thanks a lot. Is there a spesn version? Can I flash this spes version on my spesn phone? Thank you in advance

GeoS__ said:
Thanks a lot. Is there a spesn version? Can I flash this spes version on my spesn phone? Thank you in advance
Click to expand...
Click to collapse
spes and spesn are the same device. the "n" in spesn stands for NFC support

MarvavCZE said:
spes and spesn are the same device. the "n" in spesn stands for NFC support
Click to expand...
Click to collapse
Oh really? Can i flash it then? I really do not care much for NFC.

GeoS__ said:
Oh really? Can i flash it then? I really do not care much for NFC.
Click to expand...
Click to collapse
Of course, you can, in recovery builds these differences don't matter.

just rooted with FASTBOOT and latest Magisk.App
How to Root Xiaomi MIUI 13 based on Android 12 via Magisk
In this guide, we will show you the detailed steps to root your Xiaomi device running MIUI 13 based on Android 12 via Magisk.
www.droidwin.com
Installation
The Magic Mask for Android
topjohnwu.github.io
Current installed MiUi version needs to match the complete Recovery Image you have to download
in my case:
https://bigota.d.miui.com/V13.0.11.0.RGKEUXM/spesn_eea_global_images_V13.0.11.0.RGKEUXM_20220606.0000.00_11.0_eea_5c36ea339b.tgz
or
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Extracting the Boot.Img - let magic app patch it on your fone copy back to Computer and install it like described on "droidwin":
fastboot flash boot magisk_patched-25100_0UGhl.img
have fun
linolino

GeoS__ said:
As the title says. I managed to unlock the bootloader but now I need to install TWRP to install magisk, right? How do I get around doing that? There are some shady downloads on the internet but on twrp.me there is nothing for the phone. What do I do? Thanks in advance!
Click to expand...
Click to collapse
I am in the same situation,
ie. I have a Note 11 Pro without NFC
[Phone code: SPES ]
• bootloader unlocked from Xiaomi (after 7+ days waiting)
• running MIUI Global 13.0.15 [ RGCMIXM ] , Android v 11 RKQ1.211001.001
I have following TWRP
- twrp-3.6.2-12.1-21.06.22
- twrp-3.6.2_12-0-spes-Jabiyeff
and I tried to flash TWRP in fastboot (below), but it always fails and does not work
Code:
fastboot flash recovery twrp.img
I'm used to flashing TWRP and ROMs, but it's been a while since I touched a Xiaomi device,
so I am wondering is there anything different that I need to do ?
also, any 'new methods' for flashing Magisk ?
( and passing SafetyNet )

I am typing this on my custom ROM. I did not flash through fastboot. I booted to the twrp img with it though (fastboot boot twrp.img if i remember correctly.) and, well, i flashed from the option inside twrp

GeoS__ said:
I am typing this on my custom ROM. I did not flash through fastboot. I booted to the twrp img with it though (fastboot boot twrp.img if i remember correctly.) and, well, i flashed from the option inside twrp
Click to expand...
Click to collapse
so, you flashed TWRP recovery, by booting the TWRP from your PC ?
OK... I can try that.

exactly. i connected with adb and checked with adb devices, then pushed the twrp image to the phone and booted off of it through fastboot. if it works booting off of the img it's pretty safe to flash

To flash a custom recovery on Spes, you need to first run the following command in fastboot on the pc:
fastboot boot XXX.img (this is the name of twrp/ofox/Shrp image)
then inside the recovery, you must go to advanced and select the option flash this twrp, with that the recovery is installed by default. But remember that every time you install a new rom, the recovery will change, so you should flash twrp every time you finish installing a new rom.

Microsheepcl said:
To flash a custom recovery on Spes, you need to first run the following command in fastboot on the pc:
fastboot boot XXX.img (this is the name of twrp/ofox/Shrp image)
then inside the recovery, you must go to advanced and select the option flash this twrp, with that the recovery is installed by default. But remember that every time you install a new rom, the recovery will change, so you should flash twrp every time you finish installing a new rom.
Click to expand...
Click to collapse
exactly! twrp even offers a checkbox to automatically reflash itself after the rom when flashing

interesting, it seems to work a little bit different than what I did before! thx for sharing your knowledge

metaxda said:
I am in the same situation,
ie. I have a Note 11 Pro without NFC
[Phone code: SPES ]
• bootloader unlocked from Xiaomi (after 7+ days waiting)
• running MIUI Global 13.0.15 [ RGCMIXM ] , Android v 11 RKQ1.211001.001
I have following TWRP
- twrp-3.6.2-12.1-21.06.22
- twrp-3.6.2_12-0-spes-Jabiyeff
and I tried to flash TWRP in fastboot (below), but it always fails and does not work
Code:
fastboot flash recovery twrp.img
I'm used to flashing TWRP and ROMs, but it's been a while since I touched a Xiaomi device,
so I am wondering is there anything different that I need to do ?
also, any 'new methods' for flashing Magisk ?
( and passing SafetyNet )
Click to expand...
Click to collapse
Have these twrp you used decrypted the device succesfully? The both twrp i used didnt work on decrypt, and both bootlooped my phone after trying to flash them to recovery(others/flash to device), The one that worked on me was a unnoficial Ofox

UltimaDea said:
Have these twrp you used decrypted the device succesfully? The both twrp i used didnt work on decrypt, and both bootlooped my phone after trying to flash them to recovery(others/flash to device)
Click to expand...
Click to collapse
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"

gentano said:
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"
Click to expand...
Click to collapse
3.6.1 only works for MIUI A11 ROMs
3.6.2 only works for AOSP and A12 MIUI (but no for MIUI ROM flashing)
3.7.0 fully works for any ROM except A11

gentano said:
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"
Click to expand...
Click to collapse
Both the TWRP 3.6.2-12.1 and TWRP 3.7.0_12-0-spes works on my phone (SPES Global)
I am on android 12 version of MIUI 13. In fact I used the TWRP 3.7 to flash MIUI13.EU 13.0.5 A12 ROM and it works.
The two versions above can decrypt my phone without any problem. MTP also works in recovery mode.
Your phone is using Android 11. Probably that's the reason the TWRP versions I've mentioned above does not work for you.
I tend to agree with NeoSDAP.