Database Develop

Unbrick P9 single sim (using DC Phoenix)

There are many cases of people recovering their bricked phones but their solutions arent so clear when browsing the thread. For example, threads get abandoned once their phone was recovered, leaving people like me confused or stranded. I decided after days of trying to recover my phone share what I did to revive my P9. I hope this can help you.
Disclaimer***
- DC Phoenix costs 15 euros for 15 credits to use for 72h after initial flash (small price to pay compared to sending to repair shop or having a useless brick).
- i am NOT responsible for what you do to your phone if it broke
- this is what worked for ME, but im confident it would work for yours but no guarantees
- please read as it might give you some background information
- Bootloader code changes
- serial number resets to ABCDEF012345678
As most people on XDA, we like to flash stuff on to our phones. I was on EMUI 4.1 MM and I wanted to update to EMUI 5 Nougat. I did so successfully by installing twrp, flashing C432 oem info, and flashing B136 via SD card force update, and then using software update in the settings app to B182. Finally, I managed to flash B361 nougat via HuaweiUpdater2.0 and HiSuite.
Then, I decided to try and root my P9 but somewhere along the way, which I cant remember, I flashed the wrong recovery or something and my phone wouldn't boot - it was stuck at the huawei boot logo. I panicked and tried doing all these things using SRK tools, and HiSuite recovery mode, and eventually I was left with a super hard bricked P9. And for the next 3 days I tried all sorts of stuff to recover my phone. I really think I had tried everything (except sending to repair shop). Believe me, I think I had all of the symptoms of everyone in other threads along the way of trying to recovery it. I downloaded about 4 - 6 firmware files just trying to flash and flash but it kept being stuck at 5% or some error. I even bought the 15 euro credit to use DC Phoenix, which allowed me to flash the firmwares but it didn't change anything besides making my semi brick to brick again vice versa.. Nothing seemed to work. This was using Method 1 in their unbricking guide.
What worked.
There was a second method in the DC Phoenix unbricking guide, but the reason I didn't consider this method is because it required me to flash my P9's image file (.dgtks file) which seemingly can only be downloaded from DC Phoenix's download page (searched everywhere but nada). There is only the P9 Dual SIM image file, and I was afraid that this would have been very bad to flash. But in the end I had no real choice cause my warranty was void when I'd unlocked my bootloader.
Here's what I did:
Using DC Phoenix's guide, follow the steps for method 2.
When the guide points you to downloading the image file, find the image for EVA-AL10 (P9 Dual SIM) and flash it.
I followed the exact steps in the guide for method 2. *dont forget to remove your sd card during the process*
Once the flashing has finished, it should boot up briefly to encrypt the storage and reboot into update install screen. If not, then the phone should be fully booted up. There are no themes or any useful apps at this stage.
At this point you must flash your desired firmware using the force update method.
Simple - copy the dload folder of your firmware on to your sd card. On the home screen of your phone, there should be a tool (sorry i cant remember which) and once opened to have an option to force update via sd card. click that and you should be all good with your working phone. In my case, I wanted to flash the firmware EVA-L09C432B136. I copied its contents into the sdcards dload and flashed it without a hitch (i even got ota updates).
Please ask questions if you are unsure because I've probably missed some important stuff.
EDIT:
After flashing with DC Phoenix, for some reason the serial number becomes ABCDEF0123456789, and the bootloader unlock code changes, so the code is different from what you would get from the Huawei bootloader code

Thanks ever so much for above. I was bricked into a corner for the last day or so!

You are a life saver. I had accidentally installed the NRD90M test-keys version of Android N. Caused all sorts of issues. One of the issues with NRD90M was the fact there was no keyboard installed. I relied on google voice. When it restarted it wanted to be reactivated against my google account. FRP Lock had enabled itself. I used a USB A to USB C adapter and physically connected a computer keyboard and was able to enter credentials. I used DC Phoenix to flash the EVA-AL10 firmware as you did. I then used their HCU software to change my vender and country to hw,eu. After doing that I had to use DC Phoenix again to reflash EVA-AL10. Once reflashed I used the Software app on the phone to install VIE-L09C432B180 from the SD Card. I am now all working with Android M using a C432 (eu) firmware on a New Zealand Huawei P9 Plus. I should be able to install Android N now OTF. Thanks for your detailed post.

Question: so moodie007, do you confirm me: on P9 PLUS you flashed at the start the AL10 version of the "standard" P9 ?
It's not clear:
Once reflashed I used the Software app on the phone to install VIE-L09C432B180 from the SD Card
Click to expand...
Click to collapse
What software app did you used to install that firmware? the standard eRecovery (Vol+ Vol - Pwr buttons?)

Thank you so much, you literally saved my life.

what is the DC Phoenix,is it the same as the sd card?

moodie007 said:
You are a life saver. I had accidentally installed the NRD90M test-keys version of Android N. Caused all sorts of issues. One of the issues with NRD90M was the fact there was no keyboard installed. I relied on google voice. When it restarted it wanted to be reactivated against my google account. FRP Lock had enabled itself. I used a USB A to USB C adapter and physically connected a computer keyboard and was able to enter credentials. I used DC Phoenix to flash the EVA-AL10 firmware as you did. I then used their HCU software to change my vender and country to hw,eu. After doing that I had to use DC Phoenix again to reflash EVA-AL10. Once reflashed I used the Software app on the phone to install VIE-L09C432B180 from the SD Card. I am now all working with Android M using a C432 (eu) firmware on a New Zealand Huawei P9 Plus. I should be able to install Android N now OTF. Thanks for your detailed post.
Click to expand...
Click to collapse
can you give me a username and code,I'm in china,I cannot buy it use Alipay .and my phone is bricked,would help me,thx.

Hmm i think my phone is bricked, im unable to get into the menu to update the Update.app file from the dload folder on the SD card, i cant even get the phone to switch off it just keeps restarting itself and freezing on the 'your device has been unlocked and cant be trusted' screen....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if i try and turn the phone of it just turns itself back on and freezes on that screen again
Im able to get to the Fastboot & recovery mode screen if i hold volume down button.......
and if i hold down both the volume and power buttons i get this screen....
and not the firmware update screen i should be getting.
It has been suggested that i need to use DC Phoenix program to fix the phone but will this work seeings as i cant even get the phone to boot or even switch off??

BlockABoots said:
Hmm i think my phone is bricked, im unable to get into the menu to update the Update.app file from the dload folder on the SD card, i cant even get the phone to switch off it just keeps restarting itself and freezing on the 'your device has been unlocked and cant be trusted' screen....

if i try and turn the phone of it just turns itself back on and freezes on that screen again
Im able to get to the Fastboot & recovery mode screen if i hold volume down button.......

and if i hold down both the volume and power buttons i get this screen....
if i try and turn the phone of it just turns itself back on and freezes on that screen again
Im able to get to the Fastboot & recovery mode screen if i hold volume down button.......

and if i hold down both the volume and power buttons i get this screen....

and not the firmware update screen i should be getting.
It has been suggested that i need to use DC Phoenix program to fix the phone but will this work seeings as i cant even get the phone to boot or even switch off??
Click to expand...
Click to collapse
Install twrp through fastboot. Go into twrp. From there you can find a fix for your phone. You can install oeminfo and flash ROM. Good luck

rhodondendron said:
Install twrp through fastboot. Go into twrp. From there you can find a fix for your phone. You can install oeminfo and flash ROM. Good luck
Click to expand...
Click to collapse
Does twrp work with Nougat fw then, as i thought it didnt??

BlockABoots said:
Does twrp work with Nougat fw then, as i thought it didnt??
Click to expand...
Click to collapse
Yes...
But boot in dl mode with power +- and stay ....BUT REMOVE CABLE.....

rayman95 said:
Yes...
But boot in dl mode with power +- and stay ....BUT REMOVE CABLE.....
Click to expand...
Click to collapse
Holding the power and volume buttons doesnt boot me into the force update screen though, instead i get this screen....

Try to install twrp in fastboot and reboot immediately without the cable...

BlockABoots said:
Does twrp work with Nougat fw then, as i thought it didnt??
Click to expand...
Click to collapse
Twrp work fine with nougat. Find thread called twrp P9 with decryption support emui 5.x. Work like charn

rhodondendron said:
Twrp work fine with nougat. Find thread called twrp P9 with decryption support emui 5.x. Work like charn
Click to expand...
Click to collapse
Says its for the PLUS model only.
Im trying to use command lines via adb but keep getting 'FAILED (remote: Command not allowed)' responses, any ideas?

BlockABoots said:
Says its for the PLUS model only.
Im trying to use command lines via adb but keep getting 'FAILED (remote: Command not allowed)' responses, any ideas?
Click to expand...
Click to collapse
Just try this dude. https://forum.xda-developers.com/p9/development/twrp-t3565703/page1

same problem
where the same problem sir BlockABoots hows your p9?

Alfombra said:
where the same problem sir BlockABoots hows your p9?
Click to expand...
Click to collapse
Its still bricked atm
---------- Post added at 08:24 PM ---------- Previous post was at 08:20 PM ----------
rhodondendron said:
Just try this dude. https://forum.xda-developers.com/p9/development/twrp-t3565703/page1
Click to expand...
Click to collapse
The issue im having when trying to adb to the phone is i keep getting a message saying 'FAILED (remote: Command not allowed)'.
If i type adb devices its showing no devices, its as if the PC cant detect the phone, but when i plug it into the PC it makes the USB connection sound and also if i run HiSuite it says there is no device connected but if i select the recovery option it then detects the phone but after checking says there are no available packages for my model

BlockABoots said:
Its still bricked atm
---------- Post added at 08:24 PM ---------- Previous post was at 08:20 PM ----------
The issue im having when trying to adb to the phone is i keep getting a message saying 'FAILED (remote: Command not allowed)'.
If i type adb devices its showing no devices, its as if the PC cant detect the phone, but when i plug it into the PC it makes the USB connection sound and also if i run HiSuite it says there is no device connected but if i select the recovery option it then detects the phone but after checking says there are no available packages for my model
Click to expand...
Click to collapse
From what I get, you still can go to fastboot&rescue mode right? Just flash twrp through fastboot. No need for adb dude. (use fastboot command instead of adb command dude)
You can't connect adb if you can't boot. From the twrp you can try to fix your phone. Maybe change the oeminfo, or flash a rom, even shutdown your phone to do three button rom install. Do you get what I am saying?

rhodondendron said:
From what I get, you still can go to fastboot&rescue mode right? Just flash twrp through fastboot. No need for adb dude. (use fastboot command instead of adb command dude)
You can't connect adb if you can't boot. From the twrp you can try to fix your phone. Maybe change the oeminfo, or flash a rom, even shutdown your phone to do three button rom install. Do you get what I am saying?
Click to expand...
Click to collapse
fastboot commands dont appear to work either, i was trying early on with a recovery file.....

[Guide] Unbrick Huawei P8 Lite 2017 With Locked FRP And Bootloader

Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free

hello!!
I think your guide will save me because I am in that bricked condition, BUT I can't put my P8 Lite 2017 in eRecovery mode.
The phone stuck in Huawei Logo, static logo.
If I keep pressed Power button it shutdown and then restart immediatly
If I keep pressed Power button and a second before it start I press Down button and put usb cable I can enter into fastboot mode.
That's the only mode I can enter, but as I wrote on my post some day ago, I got Phone and also FRP locked.

doomguy84 said:
hello!!
I think your guide will save me because I am in that bricked condition, BUT I can't put my P8 Lite 2017 in eRecovery mode.
The phone stuck in Huawei Logo, static logo.
If I keep pressed Power button it shutdown and then restart immediatly
If I keep pressed Power button and a second before it start I press Down button and put usb cable I can enter into fastboot mode.
That's the only mode I can enter, but as I wrote on my post some day ago, I got Phone and also FRP locked.
Click to expand...
Click to collapse
Sorry for the late reply
Try to press these buttons Power+VolUP+VolDown while booting the device
It should try to find a frimware to install but it will fail and then you choose Reboot Device

YoussefR said:
Sorry for the late reply
Try to press these buttons Power+VolUP+VolDown while booting the device
It should try to find a frimware to install but it will fail and then you choose Reboot Device
Click to expand...
Click to collapse
I know the Power + Vol Up + Vol Down combination keys, but it won't start the recovery.
Keeps rebooting...

Hey Youssef bro i did but it still gives me the "Getting package info failed" in the eRocovery menu!! Idk am i doing something wrong or what? I mean i really don't get it bro Can you like pls do a video or something idk anything to help me out pls brother

Plug69 said:
Hey Youssef bro i did but it still gives me the "Getting package info failed" in the eRocovery menu!! Idk am i doing something wrong or what? I mean i really don't get it bro Can you like pls do a video or something idk anything to help me out pls brother
Click to expand...
Click to collapse
You have to do each step carefully it gives you an error cause you didn't change the DNS settings on your Router
BTW don't connect your phone to WIFI until you set the DNS settings after that Restart your phone and Download the Frimware

YoussefR said:
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
Click to expand...
Click to collapse
Hi yousef thanks for the tutorial it's great. i like to asking you something. i can change my model with this method.
i rebranding my Gr3 2017 pra-la1 to p8 lite 2017 pra-lx1
with your method i can restore it to Gr3 2017 again it can work however the oeminfo because it's for pra-lx1.
it can work with this method ?
thanks.
---------- Post added at 06:29 PM ---------- Previous post was at 06:24 PM ----------
doomguy84 said:
I know the Power + Vol Up + Vol Down combination keys, but it won't start the recovery.
Keeps rebooting...
Click to expand...
Click to collapse
connect your phone to a charger and reboot your phone when he is down to restart press volume + button and keep him in charger it will boot to eRecovery mode
---------- Post added at 06:30 PM ---------- Previous post was at 06:29 PM ----------
doomguy84 said:
I know the Power + Vol Up + Vol Down combination keys, but it won't start the recovery.
Keeps rebooting...
Click to expand...
Click to collapse
connect your phone to a charger and reboot your phone when he is down to restart press volume + button and keep him in charger it will boot to eRecovery mode
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
doomguy84 said:
I know the Power + Vol Up + Vol Down combination keys, but it won't start the recovery.
Keeps rebooting...
Click to expand...
Click to collapse
connect your phone to a charger and reboot your phone when he is down to restart press volume + button and keep him in charger it will boot to eRecovery mode

jalel25 said:
Hi yousef thanks for the tutorial it's great. i like to asking you something. i can change my model with this method.
i rebranding my Gr3 2017 pra-la1 to p8 lite 2017 pra-lx1
with your method i can restore it to Gr3 2017 again it can work however the oeminfo because it's for pra-lx1.
it can work with this method ?
thanks.
Click to expand...
Click to collapse
To revert back to Huawei GR3 2017 you need to flash the OEMINFO of PRA-LA1C185 first then follow my instructions
OEM link:https://www.mediafire.com/file/5kuqh4g6puvzk9i/2031
Your Welcome
BTW I don't know if you're asking a question or not? (No Offense )

YoussefR said:
To revert back to Huawei GR3 2017 you need to flash the OEMINFO of PRA-LA1C185 first then follow my instructions
OEM link:https://www.mediafire.com/file/5kuqh4g6puvzk9i/2031
Your Welcome
BTW I don't know if you're asking a question or not? (No Offense )
Click to expand...
Click to collapse
yes i asked you ?
the link of pra-la1 its forme i uploaded him in another forum
thanks for your help ?

i use your guide,
now the Phone is total bricked, black screen, detect fastbboot but screen is black

eifeldragon said:
i use your guide,
now the Phone is total bricked, black screen, detect fastbboot but screen is black
Click to expand...
Click to collapse
how did u brick ur phone? wut stuff did u install and do? just curious because i havent brick my device and im doubtful/weary of the honor 8 lite firmwares/oeminfo that they might brick my pra-lx1.

- i unlocked Bootloader
- flashed TWRP- 3.1.1
- i flashed Oeminfo PRA-LX1C432.zip via TWRP
- phone reboot and it goes to Factory reset and stuck at 99%
- Bootloader and FRP locked ( i don`t have any Google accout aktiv)
- erase FRP via DC Unlocker
- enter erecovery and download latest Firmware
- download finished, installisation chrashed approx. at 80%
- since that Phone dead, no light, no screen
only thing, when it connect to PC it detect Phone in fastboot

eifeldragon said:
- i unlocked Bootloader
- flashed TWRP- 3.1.1
- erase FRP via DC Unlocker
only thing, when it connect to PC it detect Phone in fastboot
Click to expand...
Click to collapse
is that the twrp 3.1.1, the one that have the additional options (oeminfo, vendor, cust, recovery....) for Install?
if phone can still be detected via fastboot, i think there is still hope for that...
were u trying to update/downgrade from Nougat to Oreo or Oreo to Nougat??
have u tried booting to twrp recovery?
so u have an unlocked bootloader and an unlocked frp
have you tried extracting "boot.img, recovery.img and system.img" using Huawei Update Extractor v0.9.9.5 from your downloaded stock firmware's "update.app" by firmware finder?
* boot.img - kernel files
* recovery.img - recovery
* system.img - rom
then flashing them by these commands?
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash system system.img
then
Code:
fastboot reboot
this method is just by pure research, idk if it will work or the success of it. but you can try at your own risk though..

YoussefR said:
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
Click to expand...
Click to collapse
My phone isn't turned on. I can't install the app. What should I do?

TitanKnight said:
My phone isn't turned on. I can't install the app. What should I do?
Click to expand...
Click to collapse
Use another device.

Thank you mate, your tutorial saved me..
YoussefR said:
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
Click to expand...
Click to collapse
HI, after a disaster I experienced installing the beta treble emui 8 when I stuck in a rom without possibility of updating, and after I tried to go back by an update.App and a dload trick I find my self stuck in emui 5 and Android 7 but in a test rom without possibility tu update...... Your "trick" tutorial is a salvation, thank you mate.
regards

you cant use this method when you cant boot the device from my experience i relocked the bootloader after restoring twrp backup(so stupid of me) i need to send it to authorized service center if your warranty is still valid its free of charge or you can just tell them that u updated your phone and that happened they might even replace it and for me they replaced the device.this is the only way i think i can help because u cant flash anything when frp is locked.

I always get "Getting package info failed" error

still "Getting package info failed" error :/
cannot recovery also via dload/UPDATE.APP (with a small 8GB-sd in fat32 and/or in ntfs, just for test all circumstances), and tested with many different firmware (from very old nougat release, to latest oreo - mine atm installed, but bricked after magisk installation)!
still continue with same error via erecovery, and with 5% hangs (and reboot before more minutes) via dload.

Please make a video tutorial

[GUIDE] Unbrick your device or recover from bootloop

Assalamu alaikum people,
Those on the telegram group know that I bugged you a lot about needing data partition. Because of my experience with unbricking and recovering the device, I can tell you a sureshot method that works to restore the device. Do not use this method if your device already works. There seems to be a lot of files inside the data partition which are necessary for the stock ROM to work. This method asks you to wipe data partition and so system update will not work. This should be a last resort. .
Many people seem to have come to the situation where they are in fastboot, and it says frp locked, so they cannot flash new twrp. And the system seems to be in bootloop and it does not work. What to do from there?
1. Download this file ->https://www.androidfilehost.com/?fid=673956719939832337.
2. In your SDCard, create a folder called TWRP and inside it, create a folder called BACKUPS (all in capitals). Inside this, create a folder called 7xtwrpbackup (small letters) and paste the contents of the zip that you have downloaded into this.
3. Boot to twrp in your device and go to restore. There you should see a folder 7xtwrpbackup. If you select it, you will get a checkbox below with recovery_ramdisk like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Select Yes and after restore complete, go back and select reboot and reboot to recovery.
5. Now, the new twrp will boot. In the new twrp, I want you to first go to wipe -> advanced wipe -> select dalvik/art cache, cache, data, internal storage and system.
6. Come back once again and select wipe, and this time, select format data. It will ask you to type yes. After that is done, come back once again.
7. Now select install and in that, install the openkirin RR image from telegram group or here -> https://forum.xda-developers.com/honor-view-10/development/rom-t3753555 (This step is optional because openkirin RR has a greater chance of booting than stock ROM. You can skip this step and directly boot stock)
8. Your system must boot now. If it boots, then all partitions are good. You can boot stock.
9. You can now can download stock from my post here and repeat from step 5-> https://forum.xda-developers.com/9-lite/development/stock-img-unlock-indian-version-t3767569
If this does not work, then look at the second method in the next post

Second method
If your first method does not work, then you can try this second method. Make sure you have enough data left in your internet connection (1.8 GB ish) before starting the process. Please note that this method will lock your bootloader, install stock recovery, flash the stock system and boot your phone. Of course, even if it relocks the bootloader, you can still unlock it using your code.
1. Download the zip
https://www.androidfilehost.com/?fid=746010030569970895
2. Extract it into sdcard directly (i.e. extract it to the root folder of your sdcard)
3. Make sure you have enough battery left (atleast 15%). Power off your phone. Now, press and hold vol up + Vol down + power buttons until the honor logo comes. Then, you can release all the keys. The system will go into emui recovery and restore your phone.
You will have stock phone at the end of the process.
Note:-If you still have bootloop at Honor logo, then power off the phone. Hold vol up + power button until the honor logo comes. It will boot into stock recovery. From there, you can do a factory reset and erase cache partition. Then the phone will definitely boot up.

Bricked my device Twrp doesn't work
Hello, I have bricked my honor 9 lite AL10(Indian Version). I have formatted my vender directory through Twrp by mistake now my device shows erecovery and reboots. Fastboot is working fine and FRP and Devices both shows unlocked means I can flash through fastboot. I don't want to lose my internal memory data.
Help me to unbrick my device !! :crying:

Oushal kDee said:
Hello, I have bricked my honor 9 lite AL10(Indian Version). I have formatted my vender directory through Twrp by mistake now my device shows erecovery and reboots. Fastboot is working fine and FRP and Devices both shows unlocked means I can flash through fastboot. I don't want to lose my internal memory data.
Help me to unbrick my device !! :crying:
Click to expand...
Click to collapse
Download vendor partition from here https://forum.xda-developers.com/9-lite/development/stock-img-unlock-indian-version-t3767569

Hello i am siddharth, i have relocked my oem by fastboot oem relock -------- after that yes/no option came i click on yes. It starts factory formatting after completion of formatting when the phone starts its showing your device has failed verification and got stuck in it. When i press reboot option it will directly comes to erecovery mode wher the option came to download new recovery when i connect my phone with wifi it starts searching for some time after that system update failed.
When i starts mobile directly to fastboot mode by pressing volume down button and power button the white screen with android comes appear i.e fastboot mode screen. In that screen in green colour i found that
Phone Relock
FRP lock
When ever i m trying to find the device in fastboot mode by typing fastboot devices my device showing there but no other command is working such as fastboot oem unlock -------, fastboot flash system system.img, all the time it comes Failed.
I have downloaded many UPDATE.APP and tried to load that by dload method but every time after 5% it come Failed to install.
I have downloaded UPDATE.APP form ur given link also. This is only the image in which my phone comes upto 23% install after dat failed.
Nothing working for me. Kindly help me.
Mail me if there is any solution @
[email protected]

i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help

None of the method worked for me my device still bootloops no matter what system.img or rom zip file i flash. The emui recovery method didn't work for me as it loaded up to 5% and then failed instantly. Please help me unbrick my 9 lite bro. Could you provide me the boot.img? i think my phone got bricked because i tried to i install magisk on treble rom (i guess?). But anyway PLEASE HELP ME (

Try extracting kernel.img from an update and flash that. It fixed it for me.

hi twrp is bootlooping as well
cant access
---------- Post added at 07:15 PM ---------- Previous post was at 06:52 PM ----------
hey i used the twrp from the link made a backup restored it now a get bootloop cant get into twrp it goes in ti it then it fcs then am back to bootloader unlocked warning

hi anyone got custom.img and userdata.img from this LLDL31C432B130 800130 a need to restore my device

Same Problem
[email protected] said:
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
Click to expand...
Click to collapse
Even I'm facing the same problem, if anyone has solution plz help.
---------- Post added at 10:15 AM ---------- Previous post was at 10:10 AM ----------
[email protected] said:
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
Click to expand...
Click to collapse
Even I'm facing the same problem.

mine goes to 5% doesnt do anything and then it fails

aveemashfaq said:
If your first method does not work, then you can try this second method. Make sure you have enough data left in your internet connection (1.8 GB ish) before starting the process. Please note that this method will lock your bootloader, install stock recovery, flash the stock system and boot your phone. Of course, even if it relocks the bootloader, you can still unlock it using your code.
1. Download the zip
https://www.androidfilehost.com/?fid=746010030569970895
2. Extract it into sdcard directly (i.e. extract it to the root folder of your sdcard)
3. Make sure you have enough battery left (atleast 15%). Power off your phone. Now, press and hold vol up + Vol down + power buttons until the honor logo comes. Then, you can release all the keys. The system will go into emui recovery and restore your phone.
You will have stock phone at the end of the process.
Note:-If you still have bootloop at Honor logo, then power off the phone. Hold vol up + power button until the honor logo comes. It will boot into stock recovery. From there, you can do a factory reset and erase cache partition. Then the phone will definitely boot up.
Click to expand...
Click to collapse
But this is for L31
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
My phone's frp and bootloader locked,and phone is booting to erecovery,what to do

need help with LLD-AL10C675 indian version
I have flashed a cutom treble rom phh-treble to be specific,used it for couple of days and then tried instaling the magisk from magiskmanager and after its done when i reboot it shows error mode with message Func no:10(boot img ) and func no:2 , i can boot into fastboot mode both frp and phone unlocked ,can some please help me to get back my phone into a usable condition thank you

sunny_deed said:
I have flashed a cutom treble rom phh-treble to be specific,used it for couple of days and then tried instaling the magisk from magiskmanager and after its done when i reboot it shows error mode with message Func no:10(boot img ) and func no:2 , i can boot into fastboot mode both frp and phone unlocked ,can some please help me to get back my phone into a usable condition thank you
Click to expand...
Click to collapse
To help you a full firmware is required and that's not available for (India c675) yet!
Before any modification to system you should have a full firmware in hand.

BS4388 said:
To help you a full firmware is required and that's not available for (India c675) yet!
Before any modification to system you should have a full firmware in hand.
Click to expand...
Click to collapse
yea that was a pretty big mistake i made without looking for it, i have been told by someone that we can pull out all the require d imgs from a phone in good working condition, i asked in the hopes that someone would be generous enough to do that for me , thank you ,and also does anyone have any idea about when the full firmware will be released

sunny_deed said:
yea that was a pretty big mistake i made without looking for it, i have been told by someone that we can pull out all the require d imgs from a phone in good working condition, i asked in the hopes that someone would be generous enough to do that for me , thank you ,and also does anyone have any idea about when the full firmware will be released
Click to expand...
Click to collapse
What's wrong with the version (675) from here :-
https://www.mobileheadlines.net/download-huawei-honor-9-lite-firmware-files/

Sparkrite said:
What's wrong with the version (675) from here :-
https://www.mobileheadlines.net/download-huawei-honor-9-lite-firmware-files/
Click to expand...
Click to collapse
there is no Fullota version in there

sunny_deed said:
there is no Fullota version in there
Click to expand...
Click to collapse
Go:
https://forum.xda-developers.com/9-lite/development/stock-rom-indian-firmware-c675-t3813875

sunny_deed said:
there is no Fullota version in there
Click to expand...
Click to collapse
My bad, I was only trying to help.............
Anyway you have it now (post above) thanks to @BS4388 and @VigneshS007 .

Huawei P8 lite 2017 (Please for great help)

Found Phone : PRA-LX1
Model : Huawei phone in fastboot mode
Firmware : PRA-LX1C432B164
FRP: LOCKED
Phone: RELOCKED

nikola25000 said:
Found Phone : PRA-LX1
Model : Huawei phone in fastboot mode
Firmware : PRA-LX1C432B164
FRP: LOCKED
Phone: RELOCKED
Click to expand...
Click to collapse
you cant boot to the os right? if yes better send it to service center i dunno if dc unlocker works because you cant flash aything when frp is locked

try update.app, put files into dload folder on external sd and push all 3 buttons, let go of power button but keep holding volume buttons. The instalation should start it is a service pra-lx1c432b175 firmware http://androidhost.ru/K5

aciupapa said:
try update.app, put files into dload folder on external sd and push all 3 buttons, let go of power button but keep holding volume buttons. The instalation should start it is a service pra-lx1c432b175 firmware http://androidhost.ru/K5
Click to expand...
Click to collapse
dload never works atleast from my experience but he should give it a try.

aciupapa said:
try update.app, put files into dload folder on external sd and push all 3 buttons, let go of power button but keep holding volume buttons. The instalation should start it is a service pra-lx1c432b175 firmware http://androidhost.ru/K5
Click to expand...
Click to collapse
I bought the phone in Switzerland and I do not know if this firmware is suitable for my phone

aciupapa said:
try update.app, put files into dload folder on external sd and push all 3 buttons, let go of power button but keep holding volume buttons. The instalation should start it is a service pra-lx1c432b175 firmware http://androidhost.ru/K5
Click to expand...
Click to collapse
I bought the phone in Switzerland and I do not know if this firmware is suitable for my phone

nikola25000 said:
I bought the phone in Switzerland and I do not know if this firmware is suitable for my phone
Click to expand...
Click to collapse
try it Since you had c432 it matches the region of service package

aciupapa said:
try it Since you had c432 it matches the region of service package
Click to expand...
Click to collapse
my phone is locked and the bootloader is unlocked.
FRP: LOCKED
Phone: RELOCKED
I can not even start the phone system now I will try this link now that you are my business friend and I will notify you

How To Guide [GUIDE] [RUI3] Unlock bootloader on RealmeUI 3 with deep testing.

It is now possible to unlock bootloader using the in-depth deep testing app, however it will only work on Thailand firmware, so we are going to flash the Thailand firmware and use the in-depth app on it.
Links:
MTKClient: https://drive.google.com/file/d/13KohUUeuzVoGKxVWIuLDZx11PV8EeMBj/view?usp=sharing
SP Flash Tool: https://drive.google.com/file/d/1McZ11On8XbxGgE-hMA_nZqErHI_QwjQT/view?usp=sharing
MTK Drivers: https://drive.google.com/file/d/1UExJQxI1DmBGeDoYPul5YTXitOnsU6zx/view?usp=sharing
Thailand Firmware: https://drive.google.com/file/d/192KboBbW1eXzb6DWVlGAkGE-PEcgnHBJ/view?usp=sharing
Deep Testing APK: https://drive.google.com/file/d/1pESMmJef6Gm9YlJAE7OA_DDNnhFn3Jpz/view?usp=sharing
Libusb port filter: https://sourceforge.net/projects/li...ibusb-win32-devel-filter-1.2.6.0.exe/download
Flashing Thailand firmware:​We are going to flash this in SP flash tool, first, let's setup MTK authorization bypass (if you have already setup python and drivers then skip this)
Install python from https://www.python.org/downloads/ and make sure it's configured
Go to the Driver folder, right click cdc.acm.inf and install it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install libusb port filter, afterwards click Next and hold volume up and down button, then choose MediaTek USB Port.
Now click install, next install UsbDK from here: https://github.com/daynix/UsbDk/releases/
Once you have done that, open a CMD/Powershell in the directory of MTKClient, write pip3 install -r requirements.txt and python mtk payload, hold the volume up and down button and plug the device in
If everything went well, you should be seeing this:
Now open SP Flash tool, go to Options > Option
Now go to Connection and select UART, set the baud rate to 921600
Now, open the scatter file (MT6785_Android_scatter.txt) from the directory of the firmware, it should load the firmware
Unselect opporeserve2 and click the Download button, it should start flashing
Once it is done flashing, you should see this:
Don't forget to reboot the device into recovery mode (volume down + power) and format data.
Updating to RealmeUI 3:​Since it is not possible to use the deep testing app on RealmeUI 2, you must update to RealmeUI 3, simply update it from the update app in settings, if you do not get the update, we can't do anything about it.
No need, replaced firmware link with RealmeUI 3 Thailand firmware, just flash that and use the in-depth app in the guide!
Using the deep testing app and unlocking the bootloader:​Download and install the deep testing app, tap "Apply Now" and accept the agreement, you should be seeing this now:
Wait 3 to 5 minutes, close the app and reopen again, tap "Query verification status" and you should see this:
This means your device now has unlocked fastboot access, tap "Start deep testing" and the device will reboot to fastboot mode
If you see this, the device is now in fastboot mode, to unlock the bootloader plug the device into a PC and write fastboot flashing unlock in Fastboot/ADB directory, you should see this:
Press the volume up button, the bootloader is now unlocked, congratulations!
NOTE: you can return to any EEA/Indian firmware you were on before and still have the bootloader unlocked.
Credits:
@bkerler for MTKClient

I tried this method on my primary Realme 8 device (Bangladeshi varaint) and it did worked.

Nice tutorial!

Also a pro tip for recovery mode can't be accessed after changing firmware and device keep rebooting after every 5 mins while stuck in realme bootanimation
download latest platform tools from google's official developer website, go to fastboot mode, enter command "fastboot reboot recovery"
you will be in recovery mode
then format data
your device will boot to OS after that

Does it work on realme UI 3.0 C.09 (bootloader locked)?

AJ⁰⁰⁷ said:
Does it work on realme UI 3.0 C.09 (bootloader locked)?
Click to expand...
Click to collapse
It shouldn't matter which firmware you are on right now, as for updating to TH RUI3 firmware it dosen't matter which C.0x it is as long as it's RealmeUI 3.

plarfman said:
It shouldn't matter which firmware you are on right now, as for updating to TH RUI3 firmware it dosen't matter which C.0x it is as long as it's RealmeUI 3.
Click to expand...
Click to collapse
Thank You

AJ⁰⁰⁷ said:
Does it work on realme UI 3.0 C.09 (bootloader locked)?
Click to expand...
Click to collapse
No. It's not working on RUI3 c.09 version. I've tried on my Bangladeshi 8/128 GB variant. And it got bricked after flashing the Thailand firmware.

ShahriarX1 said:
No. It's not working on RUI3 c.09 version. I've tried on my Indian 8/128 variant. And it got bricked after flashing the Thailand firmware.
Click to expand...
Click to collapse
Ohhz that's bad @plarfman

plarfman said:
It shouldn't matter which firmware you are on right now, as for updating to TH RUI3 firmware it dosen't matter which C.0x it is as long as it's RealmeUI 3.
Click to expand...
Click to collapse
I think you misunderstood it. I was asking that can I flash it over my Indian C.09 firmware?

plarfman said:
It shouldn't matter which firmware you are on right now, as for updating to TH RUI3 firmware it dosen't matter which C.0x it is as long as it's RealmeUI 3.
Click to expand...
Click to collapse
Was the Thailand firmware you attached in the post official??
Cause I got an error while flashing it. It says the firmware is not official.

ShahriarX1 said:
Was the Thailand firmware you attached in the post official??
Cause I got an error while flashing it. It says the firmware is not official.
Click to expand...
Click to collapse
Show a screenshot.

ShahriarX1 said:
No. It's not working on RUI3 c.09 version. I've tried on my Bangladeshi 8/128 GB variant. And it got bricked after flashing the Thailand firmware.
Click to expand...
Click to collapse
Stuck on recovery mode text? Then you should erase userdata, metadata and md_udc using mtkclient
And yes, mine is also Bangladeshi 8/128 varaint.

I don't know why after unlocking, entering recovery mode gets difficult. I wish that can be accessed while pressing buttons.
It's like recovery combo turns into fastboot combo
Also Oppo/Realme stock recovery has a problem when magisk is installed. It will bootloop forever when reboot to recovery from magisk and it's pretty hard to get into fastboot mode that moment.
The real fix for that problem is restore stock boot and dm-verity image

plarfman said:
Show a screenshot.
Click to expand...
Click to collapse

AE_Fahim said:
Stuck on recovery mode text? Then you should erase userdata, metadata and md_udc using mtkclient
And yes, mine is also Bangladeshi 8/128 varaint.
Click to expand...
Click to collapse
Flash is not completing bro. Have a check on the Screenshot and suggest.

ShahriarX1 said:
Flash is not completing bro. Have a check on the Screenshot and suggest.
Click to expand...
Click to collapse
Looks like your file got somehow corrupted. You can try downloading ofp file, manually decrypting it and merging multiple super.img using simg2img (super 2 must be Thailand) and setting super download is true from scatter file.

all set! I went to fastboot mode using deeptest tool. But i don't know what to do after that to unlock the bootloder device. Kindly help me!

Yadhevdev66 said:
all set! I went to fastboot mode using deeptest tool. But i don't know what to do after that to unlock the bootloder device. Kindly help me!
Click to expand...
Click to collapse
in fastboot mode enter
Code:
fastboot flashing unlock

can you send the fastboot drivers?