Database Develop

Strange request: Screen protector to reduce senstivity and preferably anti glare

I'm looking for a screen protector that will reduce sensitivity. I'm not sure I like capacitive screens... With my previous Touch HD I can use anything with pin sharp accuracy.

I attached FOLIX-Screen protector antireflective (sorry, can´t post external links as Junior member). Bought it from Amazon GER.
Attaches easy and perfectly, no air-bubbles, gives a much better haptic response and reduces mistyping and best of all: NOW I can fully use it in direct sunlight as Navi-System on my ultralight-gyroplane.
Together with the tweaks and progs from the xperts in this forum (You are absolutely great guys !) it spared me to buy a new mini-notebook for the go.
Wouldn´t know how to live and navigate w/o HD 2 any more

troed said:
I attached FOLIX-Screen protector antireflective (sorry, can´t post external links as Junior member). Bought it from Amazon GER.
Attaches easy and perfectly, no air-bubbles, gives a much better haptic response and reduces mistyping and best of all: NOW I can fully use it in direct sunlight as Navi-System on my ultralight-gyroplane.
Together with the tweaks and progs from the xperts in this forum (You are absolutely great guys !) it spared me to buy a new mini-notebook for the go.
Wouldn´t know how to live and navigate w/o HD 2 any more
Click to expand...
Click to collapse
I got a set of three off eBay for £3. They reduce glare because they have a satin texture, and reduce sensitivity (probably because of their cheapness!) but in this instance it's a great advantage.
My keyboard has almost COMPLETELY stopped going crazy outdoors and is now very usable. No tweaks needed. It fits well at the top but bevels off level with the middle of the keys rather than being cut out. This isn't really a problem for me though.
If you want the eBay link I can pass it on. The brand is E-cell.

Thanks for the help people.
I ended up buying the cheapo anti glare protector from e-cell. I'll let you know how it went once received.

I'm using an E-Cell one, it's great!

I bought a pack of 5 cheap one of ebay, and I now have more control over the screen as its less responsive

ez2remember said:
Thanks for the help people.
I ended up buying the cheapo anti glare protector from e-cell. I'll let you know how it went once received.
Click to expand...
Click to collapse
LOL I went around and bought from 10 different suppliers on ebay their antiglare screen protectors.
I've the e-cell ones too. personally don't think it's very good. it's very thin and it scratches relatively easily. dents easily IMHO.
Of all those I received, I prefer the ones from amor_istores.
I don't like some of the others coz they don't have a curve at the bottom. Not very comfortable with them since others provide "more" protection.
AVOID the ones from hello.6670 : They're not anti-glare at all, but they're fantastic clear screen protectors, looks as if you don't have a screen protector. I emailed wanting to change for something that's really anti-glare, but the seller's pretty rude, and I've actually opened a dispute with them.

Thanks If I don't like the e-cell SP I will give your suggestion a go.
http://cgi.ebay.co.uk/ws/eBayISAPI....akeTrack=true&ssPageName=VIP:watchlink:top:en

ez2remember said:
I'm looking for a screen protector that will reduce sensitivity. I'm not sure I like capacitive screens... With my previous Touch HD I can use anything with pin sharp accuracy.
Click to expand...
Click to collapse
I saw last week a shop selling the invisibleshield for the HD2 and a note that says it reduces sensitivity so need to press extra hard... was a bit too expensive for me.
Hope this helps.

Oh yes just a note. Some of the screen protectors I've tried cause my screen sensitivity to be totally off... you know there's a thread talking about screwed up screen sensitivities, where there are ghost taps, inaccuracies etc? Yes, That definitely happens for me with the invisibleshield, some of the mirror screen protectors.
of course, your experiences may vary. I wouldn't have pinned it down to the screen protectors if I didn't start off with a super good one, with no problems, and problems starting only with some of the other screen protectors and gone once I removed them.

This WILL reduce censitivity but also it will increase friction. meaning, it will be hard to slide your fingers on the screen since you're practially sliding your finger on some non-slide material.

http://www.netimes.com/shop/glarefr...tc-hd2-t8585-htc-leo-p-2466.html?cPath=80_731
I've got one of those on at the moment. Does work for anti glare and makes the screen less sensitive.

Screen Protectors for Moto Z play

I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.

SK47007 said:
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
Click to expand...
Click to collapse
The gap is necessary.
I think all 3 Zs can use the same one, a theory of mine, not yet confirmed.
Look at the other forums.
I too am ready to buy.

as i compared tempered glasses on ebay for Z and Z Play, the difference is upper part - they both have flash and front camera but switched between models

Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?

yayo685 said:
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
Click to expand...
Click to collapse
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.

emailrob said:
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
Click to expand...
Click to collapse
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.

yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
I picked up a pair of Omoton brand tempered glass for $8 on Amazon. They are "meh" at best. First one I missed a spot of dust mid screen, tried to pull to reapply, and cracked the corner. Not totally unusual. Second one went on clean, but had 3 big bubbles - worked their way out after 3 days. Because of the 2.5d taper of the device screen, there's an unattached "ring" around the edge of the screen (maybe 2-3 mm wide) where the protector doesn't fully attach. Screen responsiveness is mildly diminished - rarely causes any serious issue, but missed touches/swipes do happen.
Tempted to pull and run naked, but it's tolerable for now and I like the added protection, since I don't have insurance.

yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
Same one as the poster above
https://www.amazon.com/gp/product/B01LY9TCL2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Two pack. Screen responsiveness seems fine, and I'm happy that the screen is safe.

try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ

drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
Please post pictures when you get the 2nd one

Does anybody know if there is a tempered glass privacy shield for Z Play? Like the ones that prevent people from seeing the screen when they look at it in an angle.

Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

drvoje said:
[...] i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:

aviwdoowks said:
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.

dplakta said:
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
Click to expand...
Click to collapse
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
brinox said:
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
Click to expand...
Click to collapse
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so

Thanks to those of you who suggested the sparin screen protectors.
Got mine a couple days ago, and installed today. Definitely a slightly smaller coverage area than the Omoton I replaced. The sparin does give me a halo of unattached edge still, but it's smaller than the omoton, and most importantly almost nonexistent on the bottom edge - so hopefully won't hook on my pocket and peel up like the omoton.
Nicely packaged, good install kit. Install went fine - 2 good sized bubbles toward one edge initially, but they both worked themselves out after a couple hours.
Screen sensitivity is a little better than with the omoton protector, but still slightly diminished from naked.
Overall, would buy again.

drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
razorsbk said:
Please post pictures when you get the 2nd one
Click to expand...
Click to collapse
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?

Iktor said:
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Click to expand...
Click to collapse
Like like that screen protector was made for the Moto Z/force, which have different bezel sizes on top and bottom than the Moto Z Play.

sorry for late reply, at that time that was best protector because it covers most of the screen and its not that expensive... i said that is made for z forse but it can fit at z play (ofc they are not same phones and its not 100% perfect but still better option then most of protectors - which have whole mic/speaker side opened)
now for camera glass protector, first of all i want to say when you install it it stays flat, you will never even notice its there
but when i installed it, dust was bellow and i did not do it right on first try, so now when i take pictures with flash turned on they become white...
now i ordered 2 more, and im expecting them to come soon, so i will install it again and i will let you know
there is no point to send you pictures because you will never know its there on camera
UPDATE for screen protector: I oredered this one, seems like best option:
http://www.ebay.com/itm/282249920491?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

aviwdoowks said:
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Click to expand...
Click to collapse
In nearly a month a cloud ☁ is still there but getting smaller each day.

Note 10 screen question

Is it correct that you can't use a glass screen protector with the new fingerprint sensor under the screen?

Have look here
https://forum.xda-developers.com/galaxy-s10/accessories/galaxy-s10-screen-protectors-t3899458
There is tempered glass for the S10 so will be same for type protectors for the Note 10

Only reason I asked was that the first one I found on Amazon said it didn't work with note 10?

stewarta13wsb said:
Only reason I asked was that the first one I found on Amazon said it didn't work with note 10?
Click to expand...
Click to collapse
whitestone are expensive and looking at that thread easily break so maybe been thinner for the finger scanner . We should start to see more soon

So got the Whitestone one eventually - complete dud! Despite the price and the promises (and all those Youtube reviews - paid for??) the fingerprint sensor doesn't work.
Interestingly now I've looked at Amazon 50% are 5 star and 50% are one star in the reviews.
I don't understand why it works or doesn't. And yes I followed the instructions to the letter, reprogrammed fingerprints and switched on screen protector setting.
Anybody got one that works yet?

Some high quality tempered glass screen protectors for the Note 10 can work with the ultra sonic fingerprint scanner. The Olixar one seems to work

iceepyon said:
Some high quality tempered glass screen protectors for the Note 10 can work with the ultra sonic fingerprint scanner. The Olixar one seems to work
Click to expand...
Click to collapse
Have you used it yourself? Seems quite an obvious mark where the fingerprint sensor is - even the commentary mentions a rainbow effect - anybody tried this one?
Or what about the Alinsea Screen Protector? My first one failed with the fingerprint scanner as well but they are sending a newer model with different liquid?
Anybody?

Different liquid, same result. Total Fail
Anybody tried the above mentioned Olixar?

Question Fingerprint Sensor problems

I keep having issues with my fingerprint sensor... constant "fingerprint doesn't match" or "Press Harder" or "... cover the whole area..."
This is with a whitestone dome on the phone...
Anyone else having this issue?

I have a galaxy s21 ultra being used with a case by a company called you maker. It originally came with a plastic sticker that was protected and covered. That circular plastic sticker allows the finger to be read using the ultrasonic technology while being in a case. There's another technology that uses light to make almost a 2d image of your print. Try without the case and see if it works. Also sorry about you inconvenience.

well... there's no way i'm gonna take the whitestone dome off since its cured... just wondering if other peeps with WD tempered screens have the same issue with the fingerprint sensor

Had that issue with my S10+ as well. Try removing fingerprints then adding them again - assuming you didn't register after installing the screen protector. Another thing I had done was register the same fingerprint multiple times.

snobrdinrtiste said:
well... there's no way i'm gonna take the whitestone dome off since its cured... just wondering if other peeps with WD tempered screens have the same issue with the fingerprint sensor
Click to expand...
Click to collapse
I have the WD screen protector on my S21 Ultra and I'm having issues with my fingerprint sensor also. I'm very disappointed because for the price, I expected it to be fully compatible with the fingerprint sensor.

The Samsung ultra comes with x2 screen protectors people rip the first one off or finger print sensor will not work i found this out the device has a second screen protector so no need to worry

snobrdinrtiste said:
I keep having issues with my fingerprint sensor... constant "fingerprint doesn't match" or "Press Harder" or "... cover the whole area..."
This is with a whitestone dome on the phone...
Anyone else having this issue?
Click to expand...
Click to collapse
Forgive me if this is a stupid question, but did you take off the factory installed screen protector that comes with the S21 Ultra? Not the one that you take off when you first remove it from the box (sort of a dust protector) but there is an actual screen protector there - very hard to see unless you look very close - if you did not remove that, then that is most likely your problem. If you did remove that before installing then I am not sure why you are having issues. Either way - best of luck my friend.

jutley said:
The Samsung ultra comes with x2 screen protectors people rip the first one off or finger print sensor will not work i found this out the device has a second screen protector so no need to worry
Click to expand...
Click to collapse
Only exynos variants come with screen protector, My U and U1 arrived without it. So just need to ensure finger print is re-registered. Did not use whitestone dome due to experiences with note 9 glass but the spigen glass is working well with finger prints once registered after application

Geekser said:
Forgive me if this is a stupid question, but did you take off the factory installed screen protector that comes with the S21 Ultra? Not the one that you take off when you first remove it from the box (sort of a dust protector) but there is an actual screen protector there - very hard to see unless you look very close - if you did not remove that, then that is most likely your problem. If you did remove that before installing then I am not sure why you are having issues. Either way - best of luck my friend.
Click to expand...
Click to collapse
Yes, I removed the original film that was on there. I also went to the "Display" menu and increased the touch sensitivity option. In addition to that, I registered the fingerprint of my thumb 3 times. I can't seem to unlock my phone in the 1st attempt. It usually takes multiple attempts for it unlock. From a visual point of view, the screen protector installed perfectly. I just wish it was fully compatible with the fingerprint sensor.

galaxyultra said:
Yes, I removed the original film that was on there. I also went to the "Display" menu and increased the touch sensitivity option. In addition to that, I registered the fingerprint of my thumb 3 times. I can't seem to unlock my phone in the 1st attempt. It usually takes multiple attempts for it unlock. From a visual point of view, the screen protector installed perfectly. I just wish it was fully compatible with the fingerprint sensor.
Click to expand...
Click to collapse
this is the exact same thing i'm experiencing!!! So annoying! I wrote to Whitestonedome and asked for a refund. Plus the bottom of the whitestonedome's glass is starting to peel ... even though it was cured and everything was fine for four straight days.
And no, the phone did not come with a pre-installed screen protector.

For what it's worth, the Fingerprint sensor works awesome for me. I have not added a glass screen protector and probably won't. For now, I am simply relying on the one installed by Samsung at the Factory - but I also have another Film Protector from AM-FILM that I will use if necessary. Very happy with how fast the FP sensor is - much better than on my previous phones....

Have both 21 ultra and whitestone dome glass installed. I have noticed that my finger slids a little not being use to glass as I tried for the life of me to use glass with my s10+. Couldn't get whitestone to work so I got zagg fusion glass. I have also noticed that if you have dry ass fingers, like after washing, it won't recognize your print. Try with lotion!

If only Samsung ditched the curved display for a flat panel, then we can buy "normal" screen protectors at fair prices.

The curve screen is a little annoying but also satisfying also

I have problems with original screen protector sometimes, registered finger only 1 time but I get same errors might just peel it off but don't know will it help any

I haven't removed the screen protector that comes with the phone from factory (not the one that you peel when you take it off the box... No issues with fingerprint sensor.. I had a note 20 ultra and I did the stupid mistake of removing the one from factory and putting one from amazon that had the circle for fingerprint.. I had to readd all prints and the worst thing is that it would miss more than hit. When I got my s21 ultra I was smart enough to keep the protective film that came with it. Other than that, I would suggest custom made with hydrogel (something I have seen where I live) which is flexile yet durable and works great with fingerprints.

I installed a generic £4 UV glass screen protector from ebay. Initially I had the exact same issue. But now it works for me. The trick I realised is to remove the old finger prints and re-register them. You will need to register the same finger 2 or 3 times and you will need to use a little more pressure when using the fingerprint scanner to unlock. It is still not as reliable as it would be without a screen protector and you will get a few misses but it gets the job done. I prefer using face unlock most of the time and use the fingerprint scanner only to make payments, access the banking app etc and for that it works fine I just need to press into the screen gently vs just placing my finger on the scanner as I would otherwise.

I don't understand how people claim that screen covers work perfectly well with with this phone's fingerprint sensors. i have tried AMfilm glass, and two soft ones by unique me and... even after the extra sensitivity was turned on, the fingers would fail most of the time. since you only get 5 tries before it locks.... so annoying... are the people that write those ratings all bs?? btw.. first experience with an ultrasonic sensor and it kinda blows..... am i out of luck? never had a phone without a screen cover ..... sigh

johnp357 said:
I don't understand how people claim that screen covers work perfectly well with with this phone's fingerprint sensors. i have tried AMfilm glass, and two soft ones by unique me and... even after the extra sensitivity was turned on, the fingers would fail most of the time. since you only get 5 tries before it locks.... so annoying... are the people that write those ratings all bs?? btw.. first experience with an ultrasonic sensor and it kinda blows..... am i out of luck? never had a phone without a screen cover ..... sigh
Click to expand...
Click to collapse
If you don't mind not having glass, a zagg will work for sure as I had it on my S10+. Currently running whitestone and if my fingers are just washed, it won't work. But if I rub them together or add lotion to my hands, it reads it with no problems. I have also added my print a few times in different variations like the side of my thumb and the tip of my thumb to make sure it can read any part of my thumb

johnp357 said:
I don't understand how people claim that screen covers work perfectly well with with this phone's fingerprint sensors. i have tried AMfilm glass, and two soft ones by unique me and... even after the extra sensitivity was turned on, the fingers would fail most of the time. since you only get 5 tries before it locks.... so annoying... are the people that write those ratings all bs?? btw.. first experience with an ultrasonic sensor and it kinda blows..... am i out of luck? never had a phone without a screen cover ..... sigh
Click to expand...
Click to collapse
If you tried 2 soft ones and those didnt work, thats a you problem

Question Asus Zenfone 8 Screen protector?

Hi everyone,
I just bought a RhinoShield impact protection for my zenfone 8. However, as far as I know, all devices or most of the flagship Android devices now have a "pre-installed" plastic screen protector. Now, I'm trying to scratch off mine to remove it before I put my impact protection however I can't seem to see that there's one. I'm afraid that there's none and scratch the main screen itself.
Can anyone confirm if there's a "pre-installed" plastic screen protector for our Zenfone 8 devices before I put my sharp knife and tools to try and remove it.

azter007 said:
Can anyone confirm if there's a "pre-installed" plastic screen protector for our Zenfone 8 devices before I put my sharp knife and tools to try and remove it.
Click to expand...
Click to collapse
No, there isn't.

dron39 said:
No, there isn't.
Click to expand...
Click to collapse
aw sheesh. thanks for confirming, I'll apply the impact protection now then.

Just wanted to add that you should brace yourself for pretty awful performance of the fingerprint scanner after installing the screen protector. I basically had to stop using it. I really miss the times of fingerprint scanners on power buttons

funstorm said:
Just wanted to add that you should brace yourself for pretty awful performance of the fingerprint scanner after installing the screen protector. I basically had to stop using it. I really miss the times of fingerprint scanners on power buttons
Click to expand...
Click to collapse
Mine is fine with protector

@Blumi511
what exactly do you have screen protector?

daniel91m said:
@Blumi511
what exactly do you have screen protector?
Click to expand...
Click to collapse
I'm using these
Savvies 6X Schutzfolie kompatibel mit Asus ZenFone 8 Displayschutz-Folie Ultra-transparent https://www.amazon.de/dp/B0958338LZ/ref=cm_sw_r_apan_glt_i_8ENAHAWMDM7N65HZDPAZ
They fit quite okay (a bit too short in width, but that's okay with me)

It is foil, not glass, so the fingerprint sensor may be working properly. I would like to have a glass that does not affect the sensitivity of the sensor ...