Good day! Realme X2 Pro brick. Need files to restore the system. Only works in mode EDL. :crying: Firmware needed for the program QFIL. How to make the necessary files for this program?(QFIL) Or can someone share a backup from the program QFIL, so that they can restore their system?
chronos1831 said:
Good day! Realme X2 Pro brick. Need files to restore the system. Only works in mode EDL. :crying: Firmware needed for the program QFIL. How to make the necessary files for this program?(QFIL) Or can someone share a backup from the program QFIL, so that they can restore their system?
Click to expand...
Click to collapse
I'm in the same boat man. I don't know how to get it reflashed either.
Im bricked too. Becare if you want to lock bootloader the system must be all the same in default, one app you delete or change will cause soft-bricked...
necsynx said:
Im bricked too. Becare if you want to lock bootloader the system must be all the same in default, one app you delete or change will cause soft-bricked...
Click to expand...
Click to collapse
No. Sew on a clean Rom. There, all programs will be installed from the firmware and everything will be fine. Maybe someone will backup through programs Qfil. And then we can restore and reflash the device. Find file for MsmDownloadTool in the format .ofp(
chronos1831 said:
No. Sew on a clean Rom. There, all programs will be installed from the firmware and everything will be fine. Maybe someone will backup through programs Qfil. And then we can restore and reflash the device. Find file for MsmDownloadTool in the format .ofp(
Click to expand...
Click to collapse
Would be a godsend if someone could do this. Seriously man.
Lanes100 said:
Would be a godsend if someone could do this. Seriously man.
Click to expand...
Click to collapse
I will look for someone who can share their backup to restore the device. I'll take it to the official service this weekend. Let's see if they can restore the device there
chronos1831 said:
I will look for someone who can share their backup to restore the device. I'll take it to the official service this weekend. Let's see if they can restore the device there
Click to expand...
Click to collapse
see if they will share the tool and stuff they use to do that. I am located in the US and have no official service place to take it to so if you could manage to get that by sweet talking the service people that would be awesome for the community.
:good:
We were unable to recover. Failed to upload last file to device
I probably found an opportunity to restore the device.
https://drive.google.com/file/d/1dmJXCHReL0z38eZIkqK_MG4g2MfvD36y/view
for MsmDownloadTool. Who can try it out? My device is in service and there is no way to check
chronos1831 said:
I probably found an opportunity to restore the device.
https://drive.google.com/file/d/1dmJXCHReL0z38eZIkqK_MG4g2MfvD36y/view
for MsmDownloadTool. Who can try it out? My device is in service and there is no way to check
Click to expand...
Click to collapse
Please help me with this firmware. What data do you need to enter to run?
chronos1831 said:
Please help me with this firmware. What data do you need to enter to run?
Click to expand...
Click to collapse
This is not an ofp file.
necsynx said:
This is not an ofp file.
Click to expand...
Click to collapse
ofp and msm are in the archive by reference. But there you need an authorized account to run the application
Has anyone had any luck with unbricking their phone when in EDL mode? im in the same boat as well and i cant seem to find the correct firmware to use with qfil tool etc.
joey2177 said:
Has anyone had any luck with unbricking their phone when in EDL mode? im in the same boat as well and i cant seem to find the correct firmware to use with qfil tool etc.
Click to expand...
Click to collapse
not yet(may soon appear
How do you access edl mode on this phone?
joey2177 said:
Has anyone had any luck with unbricking their phone when in EDL mode? im in the same boat as well and i cant seem to find the correct firmware to use with qfil tool etc.
Click to expand...
Click to collapse
you found it?
hey guys!
I think I almost have it, but I need the scatter file, any of you have it generated?
Guys have cn version?
Wont installing a11 ota ozip via twrpcnen work?
striderdon37 said:
Guys have cn version?
Wont installing a11 ota ozip via twrpcnen work?
Click to expand...
Click to collapse
it won't work, because it doesn't let fastboot or recovery go into EDL alone
---------- Post added at 03:02 PM ---------- Previous post was at 03:00 PM ----------
chronos1831 said:
I probably found an opportunity to restore the device.
https://drive.google.com/file/d/1dmJXCHReL0z38eZIkqK_MG4g2MfvD36y/view
for MsmDownloadTool. Who can try it out? My device is in service and there is no way to check
Click to expand...
Click to collapse
HI, please can you autoriced me? for a test my gmail is [email protected]
Isavar said:
it won't work, because it doesn't let fastboot or recovery go into EDL alone
---------- Post added at 03:02 PM ---------- Previous post was at 03:00 PM ----------
HI, please can you autoriced me? for a test my gmail is [email protected]
Click to expand...
Click to collapse
I already said that it only loads EDL. And looking for recovery methods only for this mode
Related
I don't own this phone anymore, but here are the files needed to rescue a QHS USB Dload 9008 Qualcomm brick after flashing a bad TOT! You can find other guides on how to use these and how to flash, no point in just reposing info haha. Just google how to use these and it SHOULD work!
https://drive.google.com/open?id=0B2OlLU7vg4YzSTFNX1l0Nk83RVE
Honestly Annoying said:
I don't own this phone anymore, but here are the files needed to rescue a QHS USB Dload 9008 Qualcomm brick after flashing a bad TOT! You can find other guides on how to use these and how to flash, no point in just reposing info haha. Just google how to use these and it SHOULD work!
https://drive.google.com/open?id=0B2OlLU7vg4YzSTFNX1l0Nk83RVE
Click to expand...
Click to collapse
Thank you my fellow sprint users will appreciate this.
Once someone with a hard bricked device confirms this works.
Its on again. Ima crack this anti rollback so u guys can have root.
Honestly Annoying said:
I don't own this phone anymore, but here are the files needed to rescue a QHS USB Dload 9008 Qualcomm brick after flashing a bad TOT! You can find other guides on how to use these and how to flash, no point in just reposing info haha. Just google how to use these and it SHOULD work!
https://drive.google.com/open?id=0B2OlLU7vg4YzSTFNX1l0Nk83RVE
Click to expand...
Click to collapse
Not finding any guides on what tools are available to flash them. Care to point us to any of the links you've seen...?
Much appreciated.
iBowToAndroid said:
Not finding any guides on what tools are available to flash them. Care to point us to any of the links you've seen...?
Much appreciated.
Click to expand...
Click to collapse
Ill. Look around tonight after work and see of i can find one for one of the other bootloader locked g4s
iBowToAndroid said:
Not finding any guides on what tools are available to flash them. Care to point us to any of the links you've seen...?
Much appreciated.
Click to expand...
Click to collapse
I googled and it looks like you need to use QFIL which is part of QPST. Someone correct me if I'm wrong.
TheMadScientist420 said:
Ill. Look around tonight after work and see of i can find one for one of the other bootloader locked g4s
Click to expand...
Click to collapse
l33tlinuxh4x0r said:
I googled and it looks like you need to use QFIL which is part of QPST. Someone correct me if I'm wrong.
Click to expand...
Click to collapse
I did attempt to use QFIL last night after poking around for a while, but no matter what, I always got a "device is not in firehose mode" which seems to be a common error, per Googling
iBowToAndroid said:
I did attempt to use QFIL last night after poking around for a while, but no matter what, I always got a "device is not in firehose mode" which seems to be a common error, per Googling
Click to expand...
Click to collapse
Ill check i got qpst
TheMadScientist420 said:
Ill check i got qpst
Click to expand...
Click to collapse
Any luck?
I also tried the writing-a-debrick-img-to-an-sd-card idea but didn't work.
iBowToAndroid said:
Any luck?
I also tried the writing-a-debrick-img-to-an-sd-card idea but didn't work.
Click to expand...
Click to collapse
Its there but i dont have a bricked g4.
You can download it its free to download and use most of it
iBowToAndroid said:
Any luck?
I also tried the writing-a-debrick-img-to-an-sd-card idea but didn't work.
Click to expand...
Click to collapse
I pushed it to my phone but again i wasnt hard bricked. It still boots
TheMadScientist420 said:
You can download it its free to download and use most of it
Click to expand...
Click to collapse
But there are no programs for using the files, nor instructions for doing so. Unless I'm not understanding you correctly...
iBowToAndroid said:
But there are no programs for using the files, nor instructions for doing so. Unless I'm not understanding you correctly...
Click to expand...
Click to collapse
https://www.google.com/amp/mytabletguru.com/how-to-flash-qualcomm-cpu/amp/
This is instrucs
---------- Post added at 12:07 PM ---------- Previous post was at 12:04 PM ----------
iBowToAndroid said:
But there are no programs for using the files, nor instructions for doing so. Unless I'm not understanding you correctly...
Click to expand...
Click to collapse
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
This is some good reading up on hard bricks too
TheMadScientist420 said:
https://www.google.com/amp/mytabletguru.com/how-to-flash-qualcomm-cpu/amp/
This is instrucs
---------- Post added at 12:07 PM ---------- Previous post was at 12:04 PM ----------
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
This is some good reading up on hard bricks too
Click to expand...
Click to collapse
I've already tried QFIL. Results were posted earlier.
And as for the second link, it states right there in the very first part that it doesn't work on LG devices
iBowToAndroid said:
I've already tried QFIL. Results were posted earlier.
And as for the second link, it states right there in the very first part that it doesn't work on LG devices
Click to expand...
Click to collapse
https://forum.xda-developers.com/g4/development/unbrick-lg-g4-h815-9008-qualcomm-t3452853
U try this one.
http://www.aryk.tech/2016/12/how-to-create-msimagembn-file-flashable.html?m=1
This list several tools that claim to be able too
So I just installed Lineage 14.1 on my phone but discovered that it has a HUGE bug where it will not load in the contacts off of my SIM
I did make a System Backup using TWRP but it wont let me RoolBack!!! When I go to the file that I saved on my laptop, I dont see it in a zip so so I do not know how to rollback. I picture of what I see in the folder will be here - [IMG="1 - Picture of the TWRP Backup!!!"]https://ibb.co/c2FJCv[/IMG]
I also have a FULL OTA UPDATE as well... PLEASE let me know how to get back to stock rom and what I have to do
storm313 said:
So I just installed Lineage 14.1 on my phone but discovered that it has a HUGE bug where it will not load in the contacts off of my SIM
I did make a System Backup using TWRP but it wont let me RoolBack!!! When I go to the file that I saved on my laptop, I dont see it in a zip so so I do not know how to rollback. I picture of what I see in the folder will be here - [IMG="1 - Picture of the TWRP Backup!!!"]https://ibb.co/c2FJCv[/IMG]
I also have a FULL OTA UPDATE as well... PLEASE let me know how to get back to stock rom and what I have to do
Click to expand...
Click to collapse
since the contacts are in sim card,
first i would suggest you to take out your sim card and then perform a dload flash
or else manually flash boot.img and system.img either by fastboot or through twrp
next time when you backup, do a backup of both system and boot with data partitions so that you wont have a problem restoring it
thilak devraj said:
since the contacts are in sim card,
first i would suggest you to take out your sim card and then perform a dload flash
or else manually flash boot.img and system.img either by fastboot or through twrp
next time when you backup, do a backup of both system and boot with data partitions so that you wont have a problem restoring it
Click to expand...
Click to collapse
I dont know where to find those though... Thats the thing. Please tell me where to get those image files
storm313 said:
I dont know where to find those though... Thats the thing. Please tell me where to get those image files
Click to expand...
Click to collapse
do you have a stock firware with you?? something like update.zip ? for your mmodel?
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
btw, whats your model number?
thilak devraj said:
do you have a stock firware with you?? something like update.zip ? for your mmodel?
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
btw, whats your model number?
Click to expand...
Click to collapse
No I dont.
Model number NMO-L23
Was trying to get the image via Firmware Finder but no working
Also I made a Backup using TWRP Tool and that's not working either *sighs*
storm313 said:
No I dont.
Model number NMO-L23
Was trying to get the image via Firmware Finder but no working
Click to expand...
Click to collapse
give me a minute, ill check out
thilak devraj said:
give me a minute, ill check out
Click to expand...
Click to collapse
Okay thanks you
Rommco05 said:
Why TWRP backup don't work?
Click to expand...
Click to collapse
Whenever I try, I gives some error about check device...while other times after restarting it, it just doesnt do anything.
Any suggestions?
Rommco05 said:
Why TWRP backup don't work?
Click to expand...
Click to collapse
because , he just backed up system partition, and not boot partition,
you have to backup all the three partitions for a twrp backup to work perfectly
for similar incidents in future i recommend backuping contacts to your google account.
storm313 said:
Okay thanks you
Click to expand...
Click to collapse
sorry , didnt find any firmware related ti nmo-l23
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
thelous said:
for similar incidents in future i recommend backuping contacts to your google account.
Click to expand...
Click to collapse
i recomend it @storm313
So there isnt any way of reverting to stock rom? OR any other custom firmware that works?
storm313 said:
So there isnt any way of reverting to stock rom? OR any other custom firmware that works?
Click to expand...
Click to collapse
you can flash custom roms
thilak devraj said:
you can flash custom roms
Click to expand...
Click to collapse
what if i was able to get the update.zip
Would that solve the problem and get me back to stock?
thilak devraj said:
you can flash custom roms
Click to expand...
Click to collapse
Also any custom rom you recommend that I should try to flash
storm313 said:
what if i was able to get the update.zip
Would that solve the problem and get me back to stock?
Click to expand...
Click to collapse
yes, that would revert you back to stock firmware, which, i think, has an option to import contacts from sim card
---------- Post added at 11:42 AM ---------- Previous post was at 11:42 AM ----------
storm313 said:
Also any custom rom you recommend that I should try to flash
Click to expand...
Click to collapse
lineage is the best
thilak devraj said:
yes, that would revert you back to stock firmware, which, i think, has an option to import contacts from sim card
---------- Post added at 11:42 AM ---------- Previous post was at 11:42 AM ----------
lineage is the best
Click to expand...
Click to collapse
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
storm313 said:
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
Click to expand...
Click to collapse
all the best! :good:
storm313 said:
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
Click to expand...
Click to collapse
Does your device have support for emui 5.0 ?
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Sent from my SM-G955U1 using Tapatalk
dkotoric said:
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
I have a US model and sorry can't answer your question however hoping you can help me by explaining how you rooted and unlocked your phones boot loader? If there is no way to recover for us US users though I may want to hold off.
Thanks
dkotoric said:
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Click to expand...
Click to collapse
http://pro-teammt.ru/firmware-database/?firmware_model=bla-l09&firmware_page=0
---------- Post added at 04:32 PM ---------- Previous post was at 04:23 PM ----------
ej_424 said:
I have a US model and sorry can't answer your question however hoping you can help me by explaining how you rooted and unlocked your phones boot loader? If there is no way to recover for us US users though I may want to hold off.
Thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/ma...o-standard-t3709535/post74619290#post74619290
lvbaal said:
http://pro-teammt.ru/firmware-database/?firmware_model=bla-l09&firmware_page=0
---------- Post added at 04:32 PM ---------- Previous post was at 04:23 PM ----------
https://forum.xda-developers.com/ma...o-standard-t3709535/post74619290#post74619290
Click to expand...
Click to collapse
Only follow the unlock part, then flash TWRP (https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904) from dev section and latest magisk after that. (http://tiny.cc/latestmagisk)
@dkotoric there doesn't seem to be any A09 yet. Either it hasn't gotten any updates yet or they just haven't been found.
I have stock firmware for BLA-A09 I can share with you. Tell me where to send
253simon said:
I have stock firmware for BLA-A09 I can share with you. Tell me where to send
Click to expand...
Click to collapse
here is the update.app from -BLA-A09 8.0.0.110(C567) update zip https://drive.google.com/open?id=1k2IvVqMyjoMWlSe1ZgXWRYt6wn4n4qaY
253simon said:
here is the update.app from -BLA-A09 8.0.0.110(C567) update zip https://drive.google.com/open?id=1k2IvVqMyjoMWlSe1ZgXWRYt6wn4n4qaY
Click to expand...
Click to collapse
dude cannot thank you enough!!!
culiacanazo said:
dude cannot thank you enough!!!
Click to expand...
Click to collapse
How do I flash in fastboot?
Here is the SYSTEM.img
https://drive.google.com/file/d/1u7XGEOnrNL3R6vWn17-9JUqxjmAe4Fbs/view
With this guide to flash the img file
https://forum.xda-developers.com/mate-10/how-to/guide-treble-compatible-rom-t3761927
253simon said:
How do I flash in fastboot?
Click to expand...
Click to collapse
Thank you, i intend to help but at the moment i really can't. I'll get to it myself as soon as i have a chance
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
culiacanazo said:
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
Click to expand...
Click to collapse
No problem
culiacanazo said:
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
Click to expand...
Click to collapse
Your pictures shown it's flashed kernel and recovery. Did you manually flashed it? Or it's doing automatically.....
Sent from my BLA-A09 using Tapatalk
253simon said:
Here is the SYSTEM.img
https://drive.google.com/file/d/1u7XGEOnrNL3R6vWn17-9JUqxjmAe4Fbs/view
With this guide to flash the img file
https://forum.xda-developers.com/mate-10/how-to/guide-treble-compatible-rom-t3761927
Click to expand...
Click to collapse
Any chance you could post the SYSTEM.img again. The extract tool isnt working for me. Thanks!
chandler781 said:
Any chance you could post the SYSTEM.img again. The extract tool isnt working for me. Thanks!
Click to expand...
Click to collapse
Im away from the computer right now but can post it later
253simon said:
Im away from the computer right now but can post it later
Click to expand...
Click to collapse
Perfect, thanks!!
chandler781 said:
Perfect, thanks!!
Click to expand...
Click to collapse
https://forum.xda-developers.com/ma...9-c567-usa-t3775258/post76170754#post76170754
got it buddy :highfive:
rogconnect said:
Your pictures shown it's flashed kernel and recovery. Did you manually flashed it? Or it's doing automatically.....
Click to expand...
Click to collapse
I manually flashed the system.IMG, kernel (aka boot) and recovery ramdisk image thru fastboot. With that, I was able to start (it wouldn't) but I somehow was missing some things I had deleted (and that's understandable) but some things I never had as well (such as system update, clones, magazine, and translator.
Somehow, after starting I was able to see the update in Firmware Finder, which before that I hadnt been able to. Downloaded it immediately and I also, same as another commenter I read just now around here somewhere, had problems with the extractor, so this time instead of the three individual IMGs thru fastboot, I flashed TWO of the supposed to be three update, update full, and update public (with the missing one being update.zip) straight thru the unofficial TWRP and voila! Back to complete clean stock with safety net (and Google pay verified and conserving custom recovery
culiacanazo said:
I manually flashed the system.IMG, kernel (aka boot) and recovery ramdisk image thru fastboot. With that, I was able to start (it wouldn't) but I somehow was missing some things I had deleted (and that's understandable) but some things I never had as well (such as system update, clones, magazine, and translator.
Somehow, after starting I was able to see the update in Firmware Finder, which before that I hadnt been able to. Downloaded it immediately and I also, same as another commenter I read just now around here somewhere, had problems with the extractor, so this time instead of the three individual IMGs thru fastboot, I flashed TWO of the supposed to be three update, update full, and update public (with the missing one being update.zip) straight thru the unofficial TWRP and voila! Back to complete clean stock with safety net (and Google pay verified and conserving custom recovery
Click to expand...
Click to collapse
Could you kindly share the kernel and ramdisk image please?
Very much appreciate!
Sent from my BLA-A09 using Tapatalk
rogconnect said:
Could you kindly share the kernel and ramdisk image please?
Very much appreciate!
Click to expand...
Click to collapse
I can if you want but they're here and are the same ones
Huawei mate 10 pro-bla-a09 (c567) usa
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
Please help with my mobile.
I know XDA where the experts gathered android, even technicians.
My mobile case is hardbrick.
I've done a lot of ways, using almost all flashing software and methods from various sources. But the result is not there.
The position of the phone is only in QDLOADER9008 mode.
But it always fails when flashing.
I'm not sure if my phone has to replace EMMC. And if indeed from your judgment who is adept at saying my emmc is broken, I might believe it.
I need flashing guides that are right and true of you all. Flashing process always runs like normal, but instantly failed not yet finished.
Please help.
Thanks.
Post some screenshots of the error while flashing!
Daluw said:
Please help with my mobile.
I know XDA where the experts gathered android, even technicians.
My mobile case is hardbrick.
I've done a lot of ways, using almost all flashing software and methods from various sources. But the result is not there.
The position of the phone is only in QDLOADER9008 mode.
But it always fails when flashing.
I'm not sure if my phone has to replace EMMC. And if indeed from your judgment who is adept at saying my emmc is broken, I might believe it.
I need flashing guides that are right and true of you all. Flashing process always runs like normal, but instantly failed not yet finished.
Please help.
Thanks.
Click to expand...
Click to collapse
Post some screenshots of the error!
if you use QFIL make sure to put the ROM dir anywhere close to the root of your volume, otherwise you'll get a "sahara protocol error".
meltbanana said:
if you use QFIL make sure to put the ROM dir anywhere close to the root of your volume, otherwise you'll get a "sahara protocol error".
Click to expand...
Click to collapse
What ur mean ? Im not understand, details please..
Sent from my Huawei Y541 using XDA Labs
in QDLOADER9008 (EDL) mode you should use QFIL (qualcomm flash image loader) to restore your ROM but extract it in a folder like D:\santoni or D:\ROM cause QFIL has issues with deeper pathways.
https://www.youtube.com/watch?v=7V-Jf4YzdLs
meltbanana said:
in QDLOADER9008 (EDL) mode you should use QFIL (qualcomm flash image loader) to restore your ROM but extract it in a folder like D:\santoni or D:\ROM cause QFIL has issues with deeper pathways.
https://www.youtube.com/watch?v=7V-Jf4YzdLs
Click to expand...
Click to collapse
Im already try this, but still same..
This may can help
@Rishi said:
Post some screenshots of the error!
Click to expand...
Click to collapse
Done
Sent from my Huawei Y541 using XDA Labs
Daluw said:
View attachment 4498198
Click to expand...
Click to collapse
That's exactly what I told you - the path C:\Program Files (x86)\Qualcomm\QPST\bin is too long,
extract your rom into C:\Temp or something closer to the root of your volume or else you'll get the sahara firehose fail error.
For example I have D:\santoni\santoni_global_images_V8.2.10.0.MAMMIEA
... and don't pick the images folder, QFIL needs the batch files, just use flash_all.bat.
meltbanana said:
That's exactly what I told you - the path C:\Program Files (x86)\Qualcomm\QPST\bin is too long,
extract your rom into C:\Temp or something closer to the root of your volume or else you'll get the sahara firehose fail error.
For example I have D:\santoni\santoni_global_images_V8.2.10.0.MAMMIEA
... and don't pick the images folder, QFIL needs the batch files, just use flash_all.bat.
Click to expand...
Click to collapse
This photo just example, im already doing, like ur talk to me..but still same, thanks Bro :laugh:
What u mean QFIL need FLASH ALL BAT ? thats for Miflash, right ? QFIL just need Patch, Raw, Firehose. Right ? Tell me more details Bro..
Sent from my Huawei Y541 using XDA Labs
that worked for me
hope it helps
Daluw said:
Done
Sent from my Huawei Y541 using XDA Labs
Click to expand...
Click to collapse
After seeing your screenshots, I would say you are doing wrong bro!
Just download the latest stock rom & extract it on the Desktop or in other drive. Then open Mi Flash Tool and browse for the folder of the extracted rom. After that connect your phone in edl mode (I mean download mode) & click refresh on the Mi Flash Tool. Wait for a sec and click flash!
Or just head on to Youtube bro!
:fingers-crossed:
Thanks!
@Rishi said:
After seeing your screenshots, I would say you are doing wrong bro!
Just download the latest stock rom & extract it on the Desktop or in other drive. Then open Mi Flash Tool and browse for the folder of the extracted rom. After that connect your phone in edl mode (I mean download mode) & click refresh on the Mi Flash Tool. Wait for a sec and click flash!
Or just head on to Youtube bro!
:fingers-crossed:
Thanks!
Click to expand...
Click to collapse
Thanks...but not help..
My case not simple like ur think...
Do u know about TOOL STUDIO ? I need 2 file for SANTONI to flash my phone with this Software.
In TOOL STUDIO, need 2 important file, MPRG_8937.mbn and 8937_msimage.mbn
Can u give me this file ??
Sent from my Huawei Y541 using XDA Labs
Daluw said:
Thanks...but not help..
My case not simple like ur think...
Do u know about TOOL STUDIO ? I need 2 file for SANTONI to flash my phone with this Software.
In TOOL STUDIO, need 2 important file, MPRG_8937.mbn and 8937_msimage.mbn
Can u give me this file ??
Sent from my Huawei Y541 using XDA Labs
Click to expand...
Click to collapse
Ok, I will try bro!
Edit: You can try this https://www.aryk.tech/2016/12/how-to-create-msimagembn-file-flashable.html
@Rishi said:
Ok, I will try bro!
Edit: You can try this https://www.aryk.tech/2016/12/how-to-create-msimagembn-file-flashable.html
Click to expand...
Click to collapse
Give me some file if u done try this tutorial..
No help Bro, no file msm created, like others comment on ur link. Look Comment by user on that link...u have ?
Sent from my Huawei Y541 using XDA Labs
I guess you opened back case and test point method to get qdloader mode.
If it was in warranty mi center would have repaired it without any charge(i got mine in 2nd sale and i still have warranty so i guess you may have too)
Remember you can have many excuses of claiming warranty of bricked device.
But as u opened it warranty is no more.
Sometimes its simple but we make it complex.
You could try fastboot rom and mi flash tool..
gursewak.10 said:
I guess you opened back case and test point method to get qdloader mode.
If it was in warranty mi center would have repaired it without any charge(i got mine in 2nd sale and i still have warranty so i guess you may have too)
Remember you can have many excuses of claiming warranty of bricked device.
But as u opened it warranty is no more.
Sometimes its simple but we make it complex.
You could try fastboot rom and mi flash tool..
Click to expand...
Click to collapse
Why im post to XDA if u recommended me to simple solution, give to service center ???
I think in this FORUM, all people got many solution..from many user Bro...
Thanks ur respon..
Sorry my bad english...
Sent from my Huawei Y541 using XDA Labs
Daluw said:
Why im post to XDA if u recommended me to simple solution, give to service center ???
I think in this FORUM, all people got many solution..from many user Bro...
Thanks ur respon..
Sorry my bad english...
Sent from my Huawei Y541 using XDA Labs
Click to expand...
Click to collapse
Ok
Did you tried fastboot rom with mi flash.
Rather than opening case you should have used deep flash cable which worked for redmi 3s. I used fastboot rom with mi flash tool.
gursewak.10 said:
Ok
Did you tried fastboot rom with mi flash.
Rather than opening case you should have used deep flash cable which worked for redmi 3s. I used fastboot rom with mi flash tool.
Click to expand...
Click to collapse
Give me right tutorial making deep flash cable..
Sent from my Huawei Y541 using XDA Labs
Daluw said:
Give me some file if u done try this tutorial..
No help Bro, no file msm created, like others comment on ur link. Look Comment by user on that link...u have ?
Sent from my Huawei Y541 using XDA Labs
Click to expand...
Click to collapse
Sorry bro, I don't have those files!
Even I got the same error like you after I tried.
Anyway, I will surely look into this further & will be back if I find any solution.
Btw, have you tried the test point method?
Greetings everyone,
I'm pretty new here to XDA and really hope you can help me out with this.
I've had my Redmi Note 10S for about a year now and well I think Xiaomi hates me now.
Recently when I went to Pisa for a holiday, my phone bricked after updating to MIUI 13.
It's stuck at the Redmi logo and will only lower brightness a little bit after it then reboot, recovery mode works but if I try reboot it's the same stuff and it won't even boot into safe mode.
I haven't modded the phone in any way but yea it literally bricked after the first reboot.
I have no backups (both Mi Cloud and GDrive and no local) but really need to try to copy files from rom to pc.
There's some important stuff that I've stored as screenshots and really need to get em.
There's a few things I want to make clear though:
-Again, phone was not modded in any way and no root/custom rom was on it
-Only updated through the actual GUI and downloaded the update like normal
-USB Debugging is enabled
-Bootloader is not enabled
-Only device with Debug permissions with my phone is a goddamn Oculus Quest 1 (don't ask me why but yea it's the only one that I had connected with it)
If someone knows in any way if I can recover my stuff through ADB on an android like device (my Quest 1) lemme know, if there's other ways please lemme know as well.
If there's no way that I can do it...well I'll just hope that wiping it fixes the issue.
Already tried contacting a Mi Authorized Center and the Xiaomi Italian Phone Number, they both said they won't be able to legally recover my data due to privacy reasons and gave me the middle finger by saying I should have paid for storage on Mi Cloud (outside of one guy on Live Chat that was actually very helpful even tho he said basically the same thing).
Sorry for the long post but please I need help.
Thanks in advance
you can just flash the fastboot firmware with miflashtool and select the option to save user data and the device wil get the new firmware without lose your valuable data in the process
tutibreaker said:
you can just flash the fastboot firmware with miflashtool and select the option to save user data and the device wil get the new firmware without lose your valuable data in the process
Click to expand...
Click to collapse
wait really?
salvo91able said:
wait really?
Click to expand...
Click to collapse
yup
salvo91able said:
wait really?
Click to expand...
Click to collapse
oh boi I'll definately try it out
can you link me to the actual program website?
all I'm seeing is fake mirror websites
also one last thing is it safe even if I have the bootloader disabled?
yup, is safe
Mi forum guide to flash
tutibreaker said:
yup, is safe
Mi forum guide to flash
Click to expand...
Click to collapse
ok thanks a lot, can you link me a download of the tool?
salvo91able said:
ok thanks a lot, can you link me a download of the tool?
Click to expand...
Click to collapse
click the blue link ._.
tutibreaker said:
click the blue link ._.
Click to expand...
Click to collapse
Ok thanks I downloaded everything and will do it after I come back from work.
One last thing, I know I'm being paranoide but just wanted to ask this as well.
Will this delete the android/media folder?
Since there's like my WhatsApp related stuff there.
tutibreaker said:
click the blue link ._.
Click to expand...
Click to collapse
Help I tried to click the "unlock" button on the website but It just downloads a file that's 0 bytes and doesn't do anything
Did it work