Database Develop

MIUI Global 7.2.4.0.0 uses A LOT of RAM. (?)

Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John

jhenrikb said:
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
Click to expand...
Click to collapse
You have a fake rom. 7.2.4.0.0 is not an official MIUI rom and newer was. 7.2.4.0 is an official rom.
You should flash the official rom.

proag said:
You have a fake rom. 7.2.4.0.0 is not an official MIUI rom and newer was. 7.2.4.0 is an official rom.
You should flash the official rom.
Click to expand...
Click to collapse
Thank you. I didn't notice the extra zero and didn't think it was unoffical.
Sincerely
John

jhenrikb said:
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
Click to expand...
Click to collapse
You are on an un-official modefied version.
The fake version is 7.2.4.0.0 <- your version.
The real official and supported by Xiaomi version is 7.2.4.0

Hi,
Hope I can get some help. I recently just picked up a unit and am on 7.2.4.0.0. Realised it was a fake rom but I seem to have trouble flashing the global rom or the china stable rom. Believe my bootloader is locked at this point and have applied through the unlock miui website but that will take at least 10 days or more to get the SMS.
Frustratingly, I have seen some solutions on the miui forum and there was one proposed solution, of which many were finding success, that includes booting to recovery mode and then hitting shift + [flash] when connected to the Chinese miPCsuite. My update only goes by to mid 50% levels and then its stuck on for several hours! Is this a USBC to USB port incompatibility issue (if it was it wouldn't have recognized the phone right?) or is my phone just beyond saving ? At this point, im not confident in using other solutions as they look highly technical and some have highlighted that their phone has bricked in doing so.
Appreciate any advice! thanks. PLEASE HELP!

androFRUST said:
Hi,
Hope I can get some help. I recently just picked up a unit and am on 7.2.4.0.0. Realised it was a fake rom but I seem to have trouble flashing the global rom or the china stable rom. Believe my bootloader is locked at this point and have applied through the unlock miui website but that will take at least 10 days or more to get the SMS.
Frustratingly, I have seen some solutions on the miui forum and there was one proposed solution, of which many were finding success, that includes booting to recovery mode and then hitting shift + [flash] when connected to the Chinese miPCsuite. My update only goes by to mid 50% levels and then its stuck on for several hours! Is this a USBC to USB port incompatibility issue (if it was it wouldn't have recognized the phone right?) or is my phone just beyond saving ? At this point, im not confident in using other solutions as they look highly technical and some have highlighted that their phone has bricked in doing so.
Appreciate any advice! thanks. PLEASE HELP!
Click to expand...
Click to collapse
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.

TheUltrametricSpace said:
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
Click to expand...
Click to collapse
What he said, download the latest, both files can be obtained HERE
-MiFlash tool - step 1
-official fastboot rom - step 2
install the MiFlash tool
extract the downloaded rom (tgz) then extract the output file (tar) > make sure you copy the path of the directory where you see all the files like flash_all flash_all_lock etc..
reboot your phone into fastboot mode (you can access this by turning off your phone, hold vol - and power)
make sure you have adb on your pc
type this: the first line is optional to see if the phone is recognized.
Code:
fastboot devices
fastboot oem edl
edit: I should mention, do not panic, the screen of the device will turn black but will still remain on.
launch the MiFlash tool
Click on Refresh, you will see a device right now in the list called COM (some number) >>>> it will be ticked
Paste the copied directory path into the white... uhh search bar thingy . or just click Browse and select the appropriate path.
Click Flash
edit: once done, simply unplug your phone and restart it by pressing the power button.
That should be all

TheUltrametricSpace said:
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
Click to expand...
Click to collapse
Thanks for the reply! Before proceeding, I actually received the SMS to unlock the bootloader but im still at work so I cant go back and attempt the unlock. So just trying to manage my expectations here.
Is it safe to assume that all I need to do now is log in to the unlock tool by miui and unlock? because im still on 7.2.4.0.0 (the unofficial discontinued rom) and I have no way of flashing it to any other roms. My last attempt last night was again, stuck at 52% after a nights worth of wait! TT
---------- Post added at 03:01 AM ---------- Previous post was at 02:49 AM ----------
xtachix said:
What he said, download the latest, both files can be obtained HERE
-MiFlash tool - step 1
-official fastboot rom - step 2
install the MiFlash tool
extract the downloaded rom (tgz) then extract the output file (tar) > make sure you copy the path of the directory where you see all the files like flash_all flash_all_lock etc..
reboot your phone into fastboot mode (you can access this by turning off your phone, hold vol - and power)
make sure you have adb on your pc
type this: the first line is optional to see if the phone is recognized.
Code:
fastboot devices
fastboot oem edl
edit: I should mention, do not panic, the screen of the device will turn black but will still remain on.
launch the MiFlash tool
Click on Refresh, you will see a device right now in the list called COM (some number) >>>> it will be ticked
Paste the copied directory path into the white... uhh search bar thingy . or just click Browse and select the appropriate path.
Click Flash
edit: once done, simply unplug your phone and restart it by pressing the power button.
That should be all
Click to expand...
Click to collapse
Thanks for the help. I will attempt this as a last resort. I just received the SMS to unlock my bootloader. Hopefully its as simple as logging in and unlocking so I can get rid of this pesky 7.2.4.0.0 supposed "Global" rom.

i have successfully flashed to global rom!!! but now i have no audio coming from the speakers!!!! is it just my luck!!!??? and after reflashing again.. its completely dead.. its goes into the sign in to miui welcome page and just goes insane.. like to the point where i cant even select options and and random menu sounds keep coming up.. cant even turn off i had to reboot to fastboot.. is a goner? sighs..

7.2.4.0.0 to Resurrection Remix (CM13)
- unlock bootloader
- flash TWRP with fastboot
- install Resurrection Remix
- install GApps
- reboot, now it's say Google play stopped.
- go back to TWRP
- wipe data
- reboot and everything is working

Mi 5 from GearBest with fake ROM (7.3.8.0) and locked BL

Hi.
I bought my Mi 5 from GearBest and it came with MIUI 7.3.8.0. I'm new to Xiaomi phones, so bear with me please!
I was trying to update it and I found out I should flash the fastboot version of the Global ROM (8.0.2.0). But to do that, I believe I need to unlock the BL. I asked for the unlock permissions, got them. When unlocking, I get an error "Couldn’t Verify Device". I found out it might be related to the fake ROM situation.
To go around, I discovered I could use EDL to flash the ROM, but apparently after 7.3.?.? it has been disabled by Xiaomi. Even tried to put EDL into the phone through ADB but it failed. Also tried to use Mi PC Suite, in both English and Chinese, to flash recovery and none of them worked. In the English version, it says I have version 7.2.4.0 and tries to flash a Chinese 8.0.12.0 version (see photo attached). One time it even completed the procedure in the phone (bar went all the way) but now the phone doesn't boot (bootloop).
I'm not one to give up, but I'm running out of ideas! Please, any help would be greatly appreciated! Thank you.

Have you checked this thread?
http://forum.xda-developers.com/mi-5/how-to/unlocking-xiaomi-mi-5-bootloader-t3336243

Expliciate said:
Have you checked this thread?
http://forum.xda-developers.com/mi-5/how-to/unlocking-xiaomi-mi-5-bootloader-t3336243
Click to expand...
Click to collapse
Yes, of course. That was the first thing I did. As I mentioned, it failed with the error message in the OP (or similar, I tried everything so the message might be close).

Bootloader can't unlocked with a "shop rom".
You must first install Global Dev or China Dev ROM.
As far as you can boot the phone into the "pc suite" mode (power on phone with volume up key pressed), you should be able to flash to global dev with latest pc suite version.
Follow this guide: http://www.gizbeat.com/10386/xiaomi-mi5-unbrick-after-bricked-from-failed-edl-flash-method-2/
Progress bar in the pc suite software is a joke, wait at least 30 minutes.

ktulu73 said:
Bootloader can't unlocked with a "shop rom".
You must first install Global Dev or China Dev ROM.
As far as you can boot the phone into the "pc suite" mode (power on phone with volume up key pressed), you should be able to flash to global dev with latest pc suite version.
Follow this guide: http://www.gizbeat.com/10386/xiaomi-mi5-unbrick-after-bricked-from-failed-edl-flash-method-2/
Progress bar in the pc suite software is a joke, wait at least 30 minutes.
Click to expand...
Click to collapse
I managed to finish the update through the recovery flash in Mi PC Suite, now I have 8.0.12.0 MAACNDI, which I would think is a Chinese Developer version. I still can't unlock, neither update through the app in Android and I can't find a way to flash a different version with Mi PC Suite, it just says it's updated.

Sorry, just noticed that your phone is already in bootloop.....same happened me, I think the progress bar on the phone is only indicator for the file copy from pc to phone but NOT for flash process.
As mentioned, same happened me. I solved that with a "deep flash" cable http://xiaomitips.com/guide/miui-deep-flash-engineering-cable-solution-to-non-edl-device/
With the deep flash cable you can follow this howto http://www.igeekphone.com/flash-miui-global-stable-rom-on-xiaomi-mi5-running-china-stable-rom-tutorial/
You need to scroll down to the howto for locked bootloader.

ktulu73 said:
Sorry, just noticed that your phone is already in bootloop.....same happened me, I think the progress bar on the phone is only indicator for the file copy from pc to phone but NOT for flash process.
As mentioned, same happened me. I solved that with a "deep flash" cable http://xiaomitips.com/guide/miui-deep-flash-engineering-cable-solution-to-non-edl-device/
With the deep flash cable you can follow this howto http://www.igeekphone.com/flash-miui-global-stable-rom-on-xiaomi-mi5-running-china-stable-rom-tutorial/
You need to scroll down to the howto for locked bootloader.
Click to expand...
Click to collapse
But I now have a working ROM, as I mentioned in the post above. Please read it.

Alegom said:
I managed to finish the update through the recovery flash in Mi PC Suite, now I have 8.0.12.0 MAACNDI, which I would think is a Chinese Developer version. I still can't unlock, neither update through the app in Android and I can't find a way to flash a different version with Mi PC Suite, it just says it's updated.
Click to expand...
Click to collapse
Really? Thought you have bricked you phone
8.0.12.0 MAACNDI is china stable, just download Global dev fromhttp://en.miui.com/download-299.html and copy it to your phone or download it direclyt on your phone.
Then start the ota updater app on phone, click the three dots in the top right corner, there is should be an option "choose update package" or so......... and just pick the downloaded ota file.

ktulu73 said:
Really? Thought you have bricked you phone
8.0.12.0 MAACNDI is china stable, just download Global dev fromhttp://en.miui.com/download-299.html and copy it to your phone or download it direclyt on your phone.
Then start the ota updater app on phone, click the three dots in the top right corner, there is should be an option "choose update package" or so......... and just pick the downloaded ota file.
Click to expand...
Click to collapse
Me too! But I run it one more time and it finished.
The CN in 8.0.12.0 MAACNDI means it's China, but I saw it's actually the last one. I tried to do what you said but with Global Dev and it said "Can't Verify Package"... I'm now downloading China Dev, should it be any different?

I updated from global stable to global dev, so maybe it is not possible to go directly from China stable to global dev.
Gesendet von meinem MI 5 mit Tapatalk

for people trying the beta who want to revert without flashing (especially sprint)

Sprint Downgrade from Android 10 Beta to Android 9 PIE:
MAKE A BACKUP WITH BACKUP BUILT INTO SETTINGS AND MOVE IT TO COMPUTER FROM LG Backup folder
Install python first and make sure to check add to path variables during installation - if you didn't you will have trouble later on
If you get any errors you can look up how to install the cryptography module - it seems to have fixed issues for some users
This is only recommended on Sprint devices as they have no other option. If you are thinking about installing the beta now, I would recommend you don't because final is coming out soon.
I will be putting the commands in " and do not include the " in what commands you execute
1. LG USB Drivers 4.4.2 http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
2. Download LGLAF and extract to desktop https://anonfile.com/7aa2z8Ean2/lglaf-develop_zip
3. Put your phone in Download Mode
a.) Power off your phone
b.) Plug in the cable connected to your computer and start holding volume up at the same time
4a. (At this point there are 2 ways, I recommend trying the first one first)
Open lglaf-develop folder and open a Powershell / cmd line
Make sure the path at the top is the folder directly leading to the lglaf.py file
(Shift Key + right mouse) and type: "python lglaf.py" then hit ENTER
If it says python is not recognized
4b. Open a normal command prompt and type "where python"
Copy the path (except for the /python.exe at the end)
Go to lglaf.py > open with > find another app > paste in path and select the python.exe file and click open
5. Type "!SABS 0" or "!SABS 1" to switch between A/B slots. You will have to test to see which one your in, no harm can be done by switching to already active slot.
6.Type "!CTRL POFF"
7.Type "exit"
The device will power off after you unplug the USB cable.
Don't worry if it takes a very long time to boot up - just hold power button for like 10 seconds and wait
Important: everytime you want to update, switch to the PIE slot so that the other slot gets updated and you have an official version to revert to.

Wait we can actually flash the android 10 beta? on the US sprint version 0o, how? i thought android 10 beta was for korean version only.

siulmagic said:
Wait we can actually flash the android 10 beta? on the US sprint version 0o, how? i thought android 10 beta was for korean version only.
Click to expand...
Click to collapse
There's a guide on v50 forum: how to install leaked v50 sprint bets
Join the telegram group for the files. Just search up v50 or g8 in the search bar inside of the app. Join the one with a bit over 100 members

antintin said:
There's a guide on v50 forum: how to install leaked v50 sprint bets
Join the telegram group for the files. Just search up v50 or g8 in the search bar inside of the app. Join the one with a bit over 100 members
Click to expand...
Click to collapse
Can you please link the telegram group?

antintin said:
There's a guide on v50 forum: how to install leaked v50 sprint bets
Join the telegram group for the files. Just search up v50 or g8 in the search bar inside of the app. Join the one with a bit over 100 members
Click to expand...
Click to collapse
You cant search groups in telegram, at least it doesnt let me. Just says no messages found

Try searching again it is there, we cant link it because its against xda rules, for some reason.

This is a quick update for those that were running the "hacked" version of android 10 ota. I was able to follow the rollback guid mentioned in the original post and it does work. The only real pain was having to enter the failed pw 30 times to get the device to wipe itself and android 9 to boot.

cas8180 said:
This is a quick update for those that were running the "hacked" version of android 10 ota. I was able to follow the rollback guid mentioned in the original post and it does work. The only real pain was having to enter the failed pw 30 times to get the device to wipe itself and android 9 to boot.
Click to expand...
Click to collapse
You could have entered recovery mode and just factory reset from there. That's what I did.

jericho246 said:
You could have entered recovery mode and just factory reset from there. That's what I did.
Click to expand...
Click to collapse
I don't believe a factory reset will downgrade the OS back to 9 from 10. Just merely wipes the data.

cas8180 said:
I don't believe a factory reset will downgrade the OS back to 9 from 10. Just merely wipes the data.
Click to expand...
Click to collapse
I meant that after rolling-back to Pie, you could have entered recovery mode to wipe your data instead of entering the wrong secure start-up code 30 times.

My Sprint got updated to Android 10 from offical OTA 20d firmware, can I revert back to Pie 9.0 by this method ? Or both slots are 10 now ?

abced123 said:
My Sprint got updated to Android 10 from offical OTA 20d firmware, can I revert back to Pie 9.0 by this method ? Or both slots are 10 now ?
Click to expand...
Click to collapse
You can revert back to pie using this but if you receive another ota after the initial Android 10 update then both slots will be in 10. But I don't see why you would want to

antintin said:
You can revert back to pie using this but if you receive another ota after the initial Android 10 update then both slots will be in 10. But I don't see why you would want to
Click to expand...
Click to collapse
Seriously, this update kinda sucks. I liked Pie better. LG managed to brake more stuff than fixing old ones.

discard

Can i try to unbrick my lg g8 sprint caused ny crossflash?
Sent from my SM-G975W using Tapatalk

Hi guys, was trying to change slots (was following BrandonB1218's bootloader unlock guide) and tried the above method using python to change slots but phone won't start after I disconnected it from the USB cable following above steps. If switching slots was successful I should have gone to slot B which had v50 eng bootloader and a few Pie partitions as instructed in BrandonB1218's guide.
I have tried holding power button for up to 10 minutes, held power + volume down button for a few minutes, tried plugging in the phone while holding volume up and plugging in the phone while holding volume down button but the phone is dead. It was fully charged at the time it powered off when I disconnected it after the '!CTRL POFF' command. Powershell screenshot is attached. Thanks.

Android# said:
Hi guys, was trying to change slots (was following BrandonB1218's bootloader unlock guide) and tried the above method using python to change slots but phone won't start after I disconnected it from the USB cable following above steps. If switching slots was successful I should have gone to slot B which had v50 eng bootloader and a few Pie partitions as instructed in BrandonB1218's guide.
I have tried holding power button for up to 10 minutes, held power + volume down button for a few minutes, tried plugging in the phone while holding volume up and plugging in the phone while holding volume down button but the phone is dead. It was fully charged at the time it powered off when I disconnected it after the '!CTRL POFF' command. Powershell screenshot is attached. Thanks.
Click to expand...
Click to collapse
i have not idea but i hope you figured it out cause i want to crossflash but im worried it might mess my sprint 820um some how, so far i only have bootloader unlocked

blaze2051 said:
i have not idea but i hope you figured it out cause i want to crossflash but im worried it might mess my sprint 820um some how, so far i only have bootloader unlocked
Click to expand...
Click to collapse
Nope, coudn't figure it out but I think the phone stopped charging so it wouldn't enter EDL mode anymore. I ended up selling it on eBay for parts.

Android# said:
Nope, coudn't figure it out but I think the phone stopped charging so it wouldn't enter EDL mode anymore. I ended up selling it on eBay for parts.
Click to expand...
Click to collapse
I see sry to hear that, im still waiting for twrp to flash with adb fastboot and see if we get some lineage Os for the G8/G8x

LGLAF link is down , could you please reupload it?

Manual update query

iI just recently acquired an Asus ROG phone 2 tencent edition . By default the item was loaded by global rom ( WW_16.0622.1906.19_0) and Finger Print version is asus/ww_1001d/asus_1001_1XXXXX. My current firmware so outdated already.
I would like to seek your expert advice on updating the firmware. I would like to update to version UL-ASUS_I001_1-ASUS-16.0631.1908.12-1.1.3-user. Can i update the firmware directly to that version or do i need to update the older version of the firmware in order to install 1908 patch.? been using iphone for long time this is my first ever android phone. looking forward for your noob friendly advice.
Thanks

MigzMaTT said:
iI just recently acquired an Asus ROG phone 2 tencent edition . By default the item was loaded by global rom ( WW_16.0622.1906.19_0) and Finger Print version is asus/ww_1001d/asus_1001_1XXXXX. My current firmware so outdated already.
I would like to seek your expert advice on updating the firmware. I would like to update to version UL-ASUS_I001_1-ASUS-16.0631.1908.12-1.1.3-user. Can i update the firmware directly to that version or do i need to update the older version of the firmware in order to install 1908 patch.? been using iphone for long time this is my first ever android phone. looking forward for your noob friendly advice.
Thanks
Click to expand...
Click to collapse
Why do you want to update to 1908, when the latest is 1910.44? If you want to update to that...
Download the raw zip file from below, extract to root of c drive and remove the original zip from the same folder (if it's in there). Put ur phone in fastboot mode (from power of state, press and hold volume up and power buttons together until you see a menu with other options, that's fastboot). Connect to pc using the side port of phone and from the extracted folder run flashall_AFT.cmd for about 5 to 10 minutes,, once done the phone will restart. Then you have updated to latest rom. Running the flashall_AFT.cmd won't erase your data...
Let us know if you encounter any issues...
https://mega.nz/#!EwoXiSyK!KNprkA40oUHce-jl7WeHp9g-BohEVL--99_0klhm1go

reg66 said:
Why do you want to update to 1908, when the latest is 1910.44? If you want to update to that...
Download the raw zip file from below, extract to root of c drive and remove the original zip from the same folder (if it's in there). Put ur phone in fastboot mode (from power of state, press and hold volume up and power buttons together until you see a menu with other options, that's fastboot). Connect to pc using the side port of phone and from the extracted folder run flashall_AFT.cmd for about 5 to 10 minutes,, once done the phone will restart. Then you have updated to latest rom. Running the flashall_AFT.cmd won't erase your data...
Let us know if you encounter any issues...
https://mega.nz/#!EwoXiSyK!KNprkA40oUHce-jl7WeHp9g-BohEVL--99_0klhm1go
Click to expand...
Click to collapse
the link is deat

Theres an entire thread dedicated to this topic in the guides section.
Cant paste now but you can follow the cn to ww guide since I don't think yours was converted right as you need to change firgerprint to ww as well

Question How to flash Android 12 onto Asus Zenfone 8 and relock bootloader.

I'd appreciate it someone could provide instructions for a numpty, in a manner that the numpty (myself) can understand.
I unlocked the Bootloader on my Asus Zenfone 8 with a view to flash the stable version of Android 12.
My mistake was not having enough skill to 1. Flash Android 12 and 2 relock the Bootloader. I unlocked the Bootloader by using the official method from the Asus site.
Oh yes, I also retrospectively realised that I lost the ability to use Google Pay and Netflix. Oh, and I may not gain any OTA updates as well.
I've read and re-read countless articles and tried to follow many "how to's" but not being successful ... to me, it seems I'm missing a common sense step that everyone knows so well, that they feel doesn't need to be included in the how to's.
So I'm seeking a fool proof step by step guide for numpties (me) or someone who could step me through it
via DM.
I'm pretty much at the point to pay someone to assist me and sort out my Zenfone with Android 12 and a relocked bootloader.
Thank you in advance for any assistance.
Thomas

Follow the steps to revert back to Android 11 at the bottom of the page. This does not require an open bootloader https://www.asus.com/Content/Android-12-Beta/
You will then be able to place the latest update firmware on the phone with a computer. From that it will detect the update files and start the procedure.

Adaoh said:
Follow the steps to revert back to Android 11 at the bottom of the page. This does not require an open bootloader https://www.asus.com/Content/Android-12-Beta/
You will then be able to place the latest update firmware on the phone with a computer. From that it will detect the update files and start the procedure.
Click to expand...
Click to collapse
Hi Adaoh,
Thank you for the suggestion, but I have another query, before I proceed.
The link provided refers to the Android 11 version WW-30.11.51.115 but the stable version Android 12 version WW-31.1004.0404.81 states on the Asus website that it will only update to this version from Android 11 version WW-30.12.112.72
The Android 12 version referred to in the link provided is WW-31.0803.0403.54 a beta version which is older than the stable Android 12 mentioned above.
Are you aware of a Android 11 version WW-30.12.112.72 image file that can be utilised? I've not found one.
And my bootloader is already unlocked (referring to your comment that this does not require an open bootloader) so I would be seeking step by step instructions how to relock.
I'm keen to update to the Stable Android 12 version as I've read I may not receive any OTA updates, and so in my mind, a stable newer version of Android 12 is superior to an older beta version of Android 12.
Thoughts please?
Thanks for your input.
Thomas

TferThomas said:
Hi Adaoh,
Thank you for the suggestion, but I have another query, before I proceed.
The link provided refers to the Android 11 version WW-30.11.51.115 but the stable version Android 12 version WW-31.1004.0404.81 states on the Asus website that it will only update to this version from Android 11 version WW-30.12.112.72
The Android 12 version referred to in the link provided is WW-31.0803.0403.54 a beta version which is older than the stable Android 12 mentioned above.
Are you aware of a Android 11 version WW-30.12.112.72 image file that can be utilised? I've not found one.
And my bootloader is already unlocked (referring to your comment that this does not require an open bootloader) so I would be seeking step by step instructions how to relock.
I'm keen to update to the Stable Android 12 version as I've read I may not receive any OTA updates, and so in my mind, a stable newer version of Android 12 is superior to an older beta version of Android 12.
Thoughts please?
Thanks for your input.
Thomas
Click to expand...
Click to collapse
Hi, I do not think that there is a script provided like in the Back to Android11 link I gave you. I have used this method to recover my phone from a boot loop, so I think that the OS version does not matter but I am not sure, it is not impossible that it would brick the phone...
if you are still on A11, I did this script when I was on the latest Android 11 build and it reverted me to the old one in the script. So in my opinion it will be fine for whatever the condition of your phone are.
After this script, since you will not have OTA updates because your phone is blacklisted from Asus' servers, you will need to flash the last Android11 (from my understanding) and then once that's done flash a12.
Flashing updates is very simple, just do the last steps I gave in the original post

TferThomas said:
I'd appreciate it someone could provide instructions for a numpty, in a manner that the numpty (myself) can understand.
I unlocked the Bootloader on my Asus Zenfone 8 with a view to flash the stable version of Android 12.
My mistake was not having enough skill to 1. Flash Android 12 and 2 relock the Bootloader. I unlocked the Bootloader by using the official method from the Asus site.
Oh yes, I also retrospectively realised that I lost the ability to use Google Pay and Netflix. Oh, and I may not gain any OTA updates as well.
I've read and re-read countless articles and tried to follow many "how to's" but not being successful ... to me, it seems I'm missing a common sense step that everyone knows so well, that they feel doesn't need to be included in the how to's.
So I'm seeking a fool proof step by step guide for numpties (me) or someone who could step me through it
via DM.
I'm pretty much at the point to pay someone to assist me and sort out my Zenfone with Android 12 and a relocked bootloader.
Thank you in advance for any assistance.
Thomas
Click to expand...
Click to collapse
Try flashing a GSI using Android Flash Tool. Then use adb to reboot it into fastboot mode. Then just do
Code:
fastboot flashing lock

$cronos_ said:
Try flashing a GSI using Android Flash Tool. Then just use adb to reboot it into fastboot mode. Then just do
Code:
fastboot flashing lock
Click to expand...
Click to collapse
Hi $cronos_,
What is a GSI please? As mentioned at the start of my post, the simpler and more detailed the reply the better as I'm the numpty and happy to admit to that.
Thank you
Thomas

Adaoh said:
Hi, I do not think that there is a script provided like in the Back to Android11 link I gave you. I have used this method to recover my phone from a boot loop, so I think that the OS version does not matter but I am not sure, it is not impossible that it would brick the phone...
if you are still on A11, I did this script when I was on the latest Android 11 build and it reverted me to the old one in the script. So in my opinion it will be fine for whatever the condition of your phone are.
After this script, since you will not have OTA updates because your phone is blacklisted from Asus' servers, you will need to flash the last Android11 (from my understanding) and then once that's done flash a12.
Flashing updates is very simple, just do the last steps I gave in the original post
Click to expand...
Click to collapse
Hi Adaoh,
So what you're saying is to follow this link and take me to an older Android 11 version but then flash the most recent Android 11 version, then flash Android 12?
Question for you that has stumped me .... most people on forums and websites quickly gloss over flashing of an Operating System but don't actually go through the exact every step .... are you able to assist here please?
Again, as per the start of my post, I'm the numpty and happy to admit that, but do need to know comprehensively each and every step.
Thank you in advance,
Thomas

TferThomas said:
Hi $cronos_,
What is a GSI please? As mentioned at the start of my post, the simpler and more detailed the reply the better as I'm the numpty and happy to admit to that.
Thank you
Thomas
Click to expand...
Click to collapse
generic system image

TferThomas said:
Hi Adaoh,
So what you're saying is to follow this link and take me to an older Android 11 version but then flash the most recent Android 11 version, then flash Android 12?
Question for you that has stumped me .... most people on forums and websites quickly gloss over flashing of an Operating System but don't actually go through the exact every step .... are you able to assist here please?
Again, as per the start of my post, I'm the numpty and happy to admit that, but do need to know comprehensively each and every step.
Thank you in advance,
Thomas
Click to expand...
Click to collapse
Updating from an update file​Ok, so to update your phone when you can't receive OTAs:
Download the version that you need from the Asus Zenfone 8 Support page
Plug in your phone to your computer, make sure the computer is trusted and that you can transfer files from the PC to the phone.
Move the zip file of the update in the base directory of the phone (The same directory as Alarms, Downloads, etc).
Wait for the transfer to finish, then you can unplug your phone if you want.
Reboot the phone
After the reboot, the phone will take a few seconds/minutes and will notify you that an update file was found, select the option to update the phone
It will then extract the update and install it all by itself, the normal update procedure starts from there
Flashing the Stock ROM (Android 11)​Note: doing this will remove any data on your phone, back it up if it is important to you​This also works if your phone is stuck in a bootloop or other problems of the sort​If your question was about the flashing of Android 11 from the Android12 page with the older version, the instructions on the page at the bottom should be enough, but I can try to make them clearer.
Turn off the phone
When the phone is off, press and hold the Volume Up key and the Power button until a screen pops up.
If the phone boots to Android, shut it back off, but this time try lifting the Power button before the Volume Up key, because the power button is like an Enter key, it will take it as if you clicked "yes, continue to android".
Plug the phone in your computer
Decompress the zip file on your computer
Execute the script file that is made for your computer
Windows: update_image.bat
Ubuntu: update_image.sh
MacOS: update_image_for_mac.sh
Wait for the process to finish, it'll take a while. You'll know it is done when the window that openned when you executed one of the script files says something along the lines of "Flashing done, press Enter to reboot"
I hope this helps!

$cronos_ said:
generic system image
Click to expand...
Click to collapse
Thank you!
Thomas

Adaoh said:
Updating from an update file​Ok, so to update your phone when you can't receive OTAs:
Download the version that you need from the Asus Zenfone 8 Support page
Plug in your phone to your computer, make sure the computer is trusted and that you can transfer files from the PC to the phone.
Move the zip file of the update in the base directory of the phone (The same directory as Alarms, Downloads, etc).
Wait for the transfer to finish, then you can unplug your phone if you want.
Reboot the phone
After the reboot, the phone will take a few seconds/minutes and will notify you that an update file was found, select the option to update the phone
It will then extract the update and install it all by itself, the normal update procedure starts from there
Flashing the Stock ROM (Android 11)​Note: doing this will remove any data on your phone, back it up if it is important to you​This also works if your phone is stuck in a bootloop or other problems of the sort​If your question was about the flashing of Android 11 from the Android12 page with the older version, the instructions on the page at the bottom should be enough, but I can try to make them clearer.
Turn off the phone
When the phone is off, press and hold the Volume Up key and the Power button until a screen pops up.
If the phone boots to Android, shut it back off, but this time try lifting the Power button before the Volume Up key, because the power button is like an Enter key, it will take it as if you clicked "yes, continue to android".
Plug the phone in your computer
Decompress the zip file on your computer
Execute the file that is made for your computer
Windows: update_image.bat
Ubuntu: update_image.sh
MacOS: update_image_for_mac.sh
Wait for the process to finish, you'll know it is done when the window that openned when you executed one of the scripts says something along the lines of "Flashing done, press Enter to reboot"
I hope this helps!
Click to expand...
Click to collapse
Hi Adaoh,
I am really glad you have taken my request as seriously as this and I thank you for the very specific detailed reply.
I'm going to try this over the next couple of days (I hope) and report back, but really do appreciate this!
Thomas

Adaoh said:
Updating from an update file​Ok, so to update your phone when you can't receive OTAs:
Download the version that you need from the Asus Zenfone 8 Support page
Plug in your phone to your computer, make sure the computer is trusted and that you can transfer files from the PC to the phone.
Move the zip file of the update in the base directory of the phone (The same directory as Alarms, Downloads, etc).
Wait for the transfer to finish, then you can unplug your phone if you want.
Reboot the phone
After the reboot, the phone will take a few seconds/minutes and will notify you that an update file was found, select the option to update the phone
It will then extract the update and install it all by itself, the normal update procedure starts from there
Flashing the Stock ROM (Android 11)​Note: doing this will remove any data on your phone, back it up if it is important to you​This also works if your phone is stuck in a bootloop or other problems of the sort​If your question was about the flashing of Android 11 from the Android12 page with the older version, the instructions on the page at the bottom should be enough, but I can try to make them clearer.
Turn off the phone
When the phone is off, press and hold the Volume Up key and the Power button until a screen pops up.
If the phone boots to Android, shut it back off, but this time try lifting the Power button before the Volume Up key, because the power button is like an Enter key, it will take it as if you clicked "yes, continue to android".
Plug the phone in your computer
Decompress the zip file on your computer
Execute the script file that is made for your computer
Windows: update_image.bat
Ubuntu: update_image.sh
MacOS: update_image_for_mac.sh
Wait for the process to finish, it'll take a while. You'll know it is done when the window that openned when you executed one of the script files says something along the lines of "Flashing done, press Enter to reboot"
I hope this helps!
Click to expand...
Click to collapse
Hi Adaoh,
This worked on the second attempt! ..... now the Zenfone 8 is updated to the stable Android 12 OS.
Thank you and made clear runnings for this numpty!
Thomas

$cronos_ said:
Try flashing a GSI using Android Flash Tool. Then just use adb to reboot it into fastboot mode. Then just do
Code:
fastboot flashing lock
Click to expand...
Click to collapse
Hi $cronos_,
I got the Zenfone 8 into recovery mode and connected to the PC and initiated a Windows Powershell and typed the following to confirm the PC could find the Zenfone 8.
PS C:\Users\roma_\OneDrive\Desktop\platform-tools> fastboot devices
M4AIB7626606MH7 fastboot
So it found the Zenfone 8
When I tried to Lock the Bootloader I got the following:
PS C:\Users\roma_\OneDrive\Desktop\platform-tools> fastboot oem lock
...
FAILED (remote: Command not supported in default implementation)
finished. total time: 0.005s
And tried your suggested command:
PS C:\Users\roma_\OneDrive\Desktop\platform-tools> fastboot flashing lock
...
FAILED (remote: Unrecognized command flashing lock)
finished. total time: 0.005s
Any thoughts on what I am doing wrong please?
Thank you in advance.
Thomas

Hi,
I had the same problem as you, couldn't use Google pay.
All I did was open powershell and use the following command.
fastboot oem asus-csc_lk
Now it's relocked and works as before.
Hope this helps you.
Craig

mef206 said:
Hi,
I had the same problem as you, couldn't use Google pay.
All I did was open powershell and use the following command.
fastboot oem asus-csc_lk
Now it's relocked and works as before.
Hope this helps you.
Craig
Click to expand...
Click to collapse
Hi Craig,
I haven't seen this one before, so will definitely give it a go.
Thank you!
Thomas

mef206 said:
Hi,
I had the same problem as you, couldn't use Google pay.
All I did was open powershell and use the following command.
fastboot oem asus-csc_lk
Now it's relocked and works as before.
Hope this helps you.
Craig
Click to expand...
Click to collapse
Hi Craig,
This sounds really promising so had a go, but was not successful.
PS C:\Users\roma_\OneDrive\Desktop\platform-tools> fastboot devices
M4AIB7626606MH7 fastboot
PS C:\Users\roma_\OneDrive\Desktop\platform-tools> fastboot oem asus-csc_lk
...
FAILED (remote: Command not supported in default implementation)
finished. total time: 0.005s
Any thoughts or suggestions would be much appreciated!
Thanks in advance,
Thomas

Hi,
Sorry I forgot to mention that I had followed the steps on the official Asus website to revert back to android 11 before I had run the command, as I wanted Google pay back.
fastboot oem asus-csc_lk
I hadn't tried to relock bootloader with Android 12 installed.
I did see in somewhere on line that the device requires factory reset after command is used. Also you could try some of these codes from following link.
hope you get it sorted.
craig
Relock the Bootloader?
I know asking this question at a very early point would be very foolish, I tried searching various places for the answer but didn't, can anyone from previous experience or with answer tell me how can the Bootloader be locked again? Thanks in...
forum.xda-developers.com

mef206 said:
Hi,
Sorry I forgot to mention that I had followed the steps on the official Asus website to revert back to android 11 before I had run the command, as I wanted Google pay back.
fastboot oem asus-csc_lk
I hadn't tried to relock bootloader with Android 12 installed.
I did see in somewhere on line that the device requires factory reset after command is used. Also you could try some of these codes from following link.
hope you get it sorted.
craig
Relock the Bootloader?
I know asking this question at a very early point would be very foolish, I tried searching various places for the answer but didn't, can anyone from previous experience or with answer tell me how can the Bootloader be locked again? Thanks in...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi Craig
That is a good point you raise ..... and believe where I may have stuffed up was not flashing the device back down to Android 11 (currently it has the Stable Android 12). I am presuming this step would wipe the Official Asus Unlock Device App which was downloaded originally, which of course unlocked the bootloader?
Steps taken today:
1. Downloaded the Zipped Android 11 Image and unzipped on the PC.c
2. Put the Zenfone 8 into Fastboot Mode and opened up CMD powershell to confirm it was in Fastboot mode
PS C:\Users\roma_\OneDrive\Desktop\WW-ZS590KS-30.11.51.115-MR0-user_20210826-release\WW-ZS590KS-30.11.51.115-MR0-user_20210826-release_for_google> fastboot devices
M4AIB7626606MH7 fastboot
PS C:\Users\roma_\OneDrive\Desktop\WW-ZS590KS-30.11.51.115-MR0-user_20210826-release\WW-ZS590KS-30.11.51.115-MR0-user_20210826-release_for_google>
3. In the Unzipped Android 11 image found the windows update_image (I checked properties to confirm this was the Windows Batch File (.bat)
4. Right clicked, Run as Administrator.
5. I got this ....
fastboot cmd : fastboot
The script can't be used in this devices,hwid=,project=project FAILED (remote
Press any key to continue . . .
I am so missing something here, no doubt something really simple, but something really frustrating lol.
Any pointers would be appreciated.
Thank you!
Thomas

Hi,
I had done exactly as you have described.
Downloaded zip android 11
Unzipped and just double clicked on bat file whilst phone in fastboot.
Afterwards ran that command after rebooting phone back into fastboot.
Im sorry I can't be of anymore help I can't see why yours is not working the same.
Craig

mef206 said:
Hi,
I had done exactly as you have described.
Downloaded zip android 11
Unzipped and just double clicked on bat file whilst phone in fastboot.
Afterwards ran that command after rebooting phone back into fastboot.
Im sorry I can't be of anymore help I can't see why yours is not working the same.
Craig
Click to expand...
Click to collapse
Hi Craig,
Thank you and good to know I was following the directions.
Got me stumped, but I'll keep at it.
The only thing I am curious about is the unzipped file is in the desktop of my laptop (easy to find) but the desktop is set to back up to OneDrive .....I wondered if that could cause a problem (outside the limits of my ability)?
Thanks again for your input.
Thomas